Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits)
  [ARM] 5171/1: ep93xx: fix compilation of modules using clocks
  [ARM] 5133/2: at91sam9g20 defconfig file
  [ARM] 5130/4: Support for the at91sam9g20
  [ARM] 5160/1: IOP3XX: gpio/gpiolib support
  [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
  [ARM] 5084/1: zylonite: Register AC97 device
  [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
  [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
  [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
  [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state
  [ARM] 5144/1: pxaficp_ir: cleanup includes
  [ARM] pxa: remove pxa_set_cken()
  [ARM] pxa: allow clk aliases
  [ARM] Feroceon: don't disable BPU on boot
  [ARM] Orion: LED support for HP mv2120
  [ARM] Orion: add RD88F5181L-FXO support
  [ARM] Orion: add RD88F5181L-GE support
  [ARM] Orion: add Netgear WNR854T support
  [ARM] s3c2410_defconfig: update for current build
  [ARM] Acer n30: Minor style and indentation fixes.
  ...

4 files changed, 199 insertions, 253 deletions

diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 7236143941f3..a8587f1f5e7e 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
 #
 config SCSI_ACORNSCSI_3
 	tristate "Acorn SCSI card (aka30) support"
-	depends on ARCH_ACORN && SCSI && BROKEN
+	depends on ARCH_ACORN && SCSI
 	select SCSI_SPI_ATTRS
 	help
 	  This enables support for the Acorn SCSI card (aka30). If you have an
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 93467e6ac923..5cebe3105260 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -10,17 +10,10 @@
 #include <asm/assembler.h>
 #include <asm/hardware.h>
 
-#if (IO_BASE == (PCIO_BASE & 0xff000000))
-#define ADDR(off,reg)						\
-		tst	off, $0x80000000			;\
-		mov	reg, $IO_BASE				;\
-		orreq	reg, reg, $(PCIO_BASE & 0x00ff0000)
-#else
-#define ADDR(off,reg)						\
-		tst	off, $0x80000000			;\
-		movne	reg, $IO_BASE				;\
-		moveq	reg, $(PCIO_BASE & 0xff000000)		;\
-		orreq	reg, reg, $(PCIO_BASE & 0x00ff0000)
+#if defined(__APCS_32__)
+#define LOADREGS(t,r,l...)	ldm##t	r, l
+#elif defined(__APCS_26__)
+#define LOADREGS(t,r,l...)	ldm##t	r, l##^
 #endif
 
 @ Purpose: transfer a block of data from the acorn scsi card to memory
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 8e53f02cc311..918ccf818757 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -123,12 +123,6 @@
 #define DBG(cmd,xxx...) xxx
 #endif
 
-#ifndef STRINGIFY
-#define STRINGIFY(x) #x
-#endif
-#define STRx(x) STRINGIFY(x)
-#define NO_WRITE_STR STRx(NO_WRITE)
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -141,9 +135,10 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/stringify.h>
+#include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/ecard.h>
 
 #include "../scsi.h"
@@ -203,44 +198,46 @@ static void acornscsi_abortcmd(AS_Host *host, unsigned char tag);
  * Miscellaneous
  */
 
-static inline void
-sbic_arm_write(unsigned int io_port, int reg, int value)
+/* Offsets from MEMC base */
+#define SBIC_REGIDX	0x2000
+#define SBIC_REGVAL	0x2004
+#define DMAC_OFFSET	0x3000
+
+/* Offsets from FAST IOC base */
+#define INT_REG		0x2000
+#define PAGE_REG	0x3000
+
+static inline void sbic_arm_write(AS_Host *host, unsigned int reg, unsigned int value)
 {
-    __raw_writeb(reg, io_port);
-    __raw_writeb(value, io_port + 4);
+    writeb(reg, host->base + SBIC_REGIDX);
+    writeb(value, host->base + SBIC_REGVAL);
 }
 
-#define sbic_arm_writenext(io,val) \
-	__raw_writeb((val), (io) + 4)
-
-static inline
-int sbic_arm_read(unsigned int io_port, int reg)
+static inline int sbic_arm_read(AS_Host *host, unsigned int reg)
 {
     if(reg == SBIC_ASR)
-	   return __raw_readl(io_port) & 255;
-    __raw_writeb(reg, io_port);
-    return __raw_readl(io_port + 4) & 255;
+	   return readl(host->base + SBIC_REGIDX) & 255;
+    writeb(reg, host->base + SBIC_REGIDX);
+    return readl(host->base + SBIC_REGVAL) & 255;
 }
 
-#define sbic_arm_readnext(io) \
-	__raw_readb((io) + 4)
+#define sbic_arm_writenext(host, val)	writeb((val), (host)->base + SBIC_REGVAL)
+#define sbic_arm_readnext(host) 	readb((host)->base + SBIC_REGVAL)
 
 #ifdef USE_DMAC
-#define dmac_read(io_port,reg) \
-	inb((io_port) + (reg))
+#define dmac_read(host,reg) \
+	readb((host)->base + DMAC_OFFSET + ((reg) << 2))
 
-#define dmac_write(io_port,reg,value) \
-	({ outb((value), (io_port) + (reg)); })
+#define dmac_write(host,reg,value) \
+	({ writeb((value), (host)->base + DMAC_OFFSET + ((reg) << 2)); })
 
-#define dmac_clearintr(io_port) \
-	({ outb(0, (io_port)); })
+#define dmac_clearintr(host) 	writeb(0, (host)->fast + INT_REG)
 
-static inline
-unsigned int dmac_address(unsigned int io_port)
+static inline unsigned int dmac_address(AS_Host *host)
 {
-    return dmac_read(io_port, DMAC_TXADRHI) << 16 |
-	   dmac_read(io_port, DMAC_TXADRMD) << 8 |
-	   dmac_read(io_port, DMAC_TXADRLO);
+    return dmac_read(host, DMAC_TXADRHI) << 16 |
+	   dmac_read(host, DMAC_TXADRMD) << 8 |
+	   dmac_read(host, DMAC_TXADRLO);
 }
 
 static
@@ -248,15 +245,15 @@ void acornscsi_dumpdma(AS_Host *host, char *where)
 {
 	unsigned int mode, addr, len;
 
-	mode = dmac_read(host->dma.io_port, DMAC_MODECON);
-	addr = dmac_address(host->dma.io_port);
-	len  = dmac_read(host->dma.io_port, DMAC_TXCNTHI) << 8 |
-	       dmac_read(host->dma.io_port, DMAC_TXCNTLO);
+	mode = dmac_read(host, DMAC_MODECON);
+	addr = dmac_address(host);
+	len  = dmac_read(host, DMAC_TXCNTHI) << 8 |
+	       dmac_read(host, DMAC_TXCNTLO);
 
 	printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ",
 		host->host->host_no, where,
 		mode, addr, (len + 1) & 0xffff,
-		dmac_read(host->dma.io_port, DMAC_MASKREG));
+		dmac_read(host, DMAC_MASKREG));
 
 	printk("DMA @%06x, ", host->dma.start_addr);
 	printk("BH @%p +%04x, ", host->scsi.SCp.ptr,
@@ -272,9 +269,9 @@ unsigned long acornscsi_sbic_xfcount(AS_Host *host)
 {
     unsigned long length;
 
-    length = sbic_arm_read(host->scsi.io_port, SBIC_TRANSCNTH) << 16;
-    length |= sbic_arm_readnext(host->scsi.io_port) << 8;
-    length |= sbic_arm_readnext(host->scsi.io_port);
+    length = sbic_arm_read(host, SBIC_TRANSCNTH) << 16;
+    length |= sbic_arm_readnext(host) << 8;
+    length |= sbic_arm_readnext(host);
 
     return length;
 }
@@ -285,7 +282,7 @@ acornscsi_sbic_wait(AS_Host *host, int stat_mask, int stat, int timeout, char *m
 	int asr;
 
 	do {
-		asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+		asr = sbic_arm_read(host, SBIC_ASR);
 
 		if ((asr & stat_mask) == stat)
 			return 0;
@@ -304,7 +301,7 @@ int acornscsi_sbic_issuecmd(AS_Host *host, int command)
     if (acornscsi_sbic_wait(host, ASR_CIP, 0, 1000, "issuing command"))
 	return -1;
 
-    sbic_arm_write(host->scsi.io_port, SBIC_CMND, command);
+    sbic_arm_write(host, SBIC_CMND, command);
 
     return 0;
 }
@@ -331,20 +328,20 @@ void acornscsi_resetcard(AS_Host *host)
 
     /* assert reset line */
     host->card.page_reg = 0x80;
-    outb(host->card.page_reg, host->card.io_page);
+    writeb(host->card.page_reg, host->fast + PAGE_REG);
 
     /* wait 3 cs.  SCSI standard says 25ms. */
     acornscsi_csdelay(3);
 
     host->card.page_reg = 0;
-    outb(host->card.page_reg, host->card.io_page);
+    writeb(host->card.page_reg, host->fast + PAGE_REG);
 
     /*
      * Should get a reset from the card
      */
     timeout = 1000;
     do {
-	if (inb(host->card.io_intr) & 8)
+	if (readb(host->fast + INT_REG) & 8)
 	    break;
 	udelay(1);
     } while (--timeout);
@@ -353,19 +350,19 @@ void acornscsi_resetcard(AS_Host *host)
 	printk("scsi%d: timeout while resetting card\n",
 		host->host->host_no);
 
-    sbic_arm_read(host->scsi.io_port, SBIC_ASR);
-    sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+    sbic_arm_read(host, SBIC_ASR);
+    sbic_arm_read(host, SBIC_SSR);
 
     /* setup sbic - WD33C93A */
-    sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
-    sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+    sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+    sbic_arm_write(host, SBIC_CMND, CMND_RESET);
 
     /*
      * Command should cause a reset interrupt
      */
     timeout = 1000;
     do {
-	if (inb(host->card.io_intr) & 8)
+	if (readb(host->fast + INT_REG) & 8)
 	    break;
 	udelay(1);
     } while (--timeout);
@@ -374,26 +371,26 @@ void acornscsi_resetcard(AS_Host *host)
 	printk("scsi%d: timeout while resetting card\n",
 		host->host->host_no);
 
-    sbic_arm_read(host->scsi.io_port, SBIC_ASR);
-    if (sbic_arm_read(host->scsi.io_port, SBIC_SSR) != 0x01)
+    sbic_arm_read(host, SBIC_ASR);
+    if (sbic_arm_read(host, SBIC_SSR) != 0x01)
 	printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n",
 		host->host->host_no);
 
-    sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
-    sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
-    sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
-    sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+    sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+    sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+    sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+    sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
 
     host->card.page_reg = 0x40;
-    outb(host->card.page_reg, host->card.io_page);
+    writeb(host->card.page_reg, host->fast + PAGE_REG);
 
     /* setup dmac - uPC71071 */
-    dmac_write(host->dma.io_port, DMAC_INIT, 0);
+    dmac_write(host, DMAC_INIT, 0);
 #ifdef USE_DMAC
-    dmac_write(host->dma.io_port, DMAC_INIT, INIT_8BIT);
-    dmac_write(host->dma.io_port, DMAC_CHANNEL, CHANNEL_0);
-    dmac_write(host->dma.io_port, DMAC_DEVCON0, INIT_DEVCON0);
-    dmac_write(host->dma.io_port, DMAC_DEVCON1, INIT_DEVCON1);
+    dmac_write(host, DMAC_INIT, INIT_8BIT);
+    dmac_write(host, DMAC_CHANNEL, CHANNEL_0);
+    dmac_write(host, DMAC_DEVCON0, INIT_DEVCON0);
+    dmac_write(host, DMAC_DEVCON1, INIT_DEVCON1);
 #endif
 
     host->SCpnt = NULL;
@@ -741,9 +738,9 @@ intr_ret_t acornscsi_kick(AS_Host *host)
      * If we have an interrupt pending, then we may have been reselected.
      * In this case, we don't want to write to the registers
      */
-    if (!(sbic_arm_read(host->scsi.io_port, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
-	sbic_arm_write(host->scsi.io_port, SBIC_DESTID, SCpnt->device->id);
-	sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_SELWITHATN);
+    if (!(sbic_arm_read(host, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
+	sbic_arm_write(host, SBIC_DESTID, SCpnt->device->id);
+	sbic_arm_write(host, SBIC_CMND, CMND_SELWITHATN);
     }
 
     /*
@@ -807,7 +804,7 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp,
 	struct scsi_cmnd *SCpnt = *SCpntp;
 
     /* clean up */
-    sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+    sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
 
     host->stats.fins += 1;
 
@@ -918,13 +915,13 @@ static
 void acornscsi_data_read(AS_Host *host, char *ptr,
 				 unsigned int start_addr, unsigned int length)
 {
-    extern void __acornscsi_in(int port, char *buf, int len);
+    extern void __acornscsi_in(void __iomem *, char *buf, int len);
     unsigned int page, offset, len = length;
 
     page = (start_addr >> 12);
     offset = start_addr & ((1 << 12) - 1);
 
-    outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+    writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
 
     while (len > 0) {
 	unsigned int this_len;
@@ -934,7 +931,7 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
 	else
 	    this_len = len;
 
-	__acornscsi_in(host->card.io_ram + (offset << 1), ptr, this_len);
+	__acornscsi_in(host->base + (offset << 1), ptr, this_len);
 
 	offset += this_len;
 	ptr += this_len;
@@ -943,10 +940,10 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
 	if (offset == (1 << 12)) {
 	    offset = 0;
 	    page ++;
-	    outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+	    writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
 	}
     }
-    outb(host->card.page_reg, host->card.io_page);
+    writeb(host->card.page_reg, host->fast + PAGE_REG);
 }
 
 /*
@@ -963,13 +960,13 @@ static
 void acornscsi_data_write(AS_Host *host, char *ptr,
 				 unsigned int start_addr, unsigned int length)
 {
-    extern void __acornscsi_out(int port, char *buf, int len);
+    extern void __acornscsi_out(void __iomem *, char *buf, int len);
     unsigned int page, offset, len = length;
 
     page = (start_addr >> 12);
     offset = start_addr & ((1 << 12) - 1);
 
-    outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+    writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
 
     while (len > 0) {
 	unsigned int this_len;
@@ -979,7 +976,7 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
 	else
 	    this_len = len;
 
-	__acornscsi_out(host->card.io_ram + (offset << 1), ptr, this_len);
+	__acornscsi_out(host->base + (offset << 1), ptr, this_len);
 
 	offset += this_len;
 	ptr += this_len;
@@ -988,10 +985,10 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
 	if (offset == (1 << 12)) {
 	    offset = 0;
 	    page ++;
-	    outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+	    writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
 	}
     }
-    outb(host->card.page_reg, host->card.io_page);
+    writeb(host->card.page_reg, host->fast + PAGE_REG);
 }
 
 /* =========================================================================================
@@ -1008,8 +1005,8 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
 static inline
 void acornscsi_dma_stop(AS_Host *host)
 {
-    dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
-    dmac_clearintr(host->dma.io_intr_clear);
+    dmac_write(host, DMAC_MASKREG, MASK_ON);
+    dmac_clearintr(host);
 
 #if (DEBUG & DEBUG_DMA)
     DBG(host->SCpnt, acornscsi_dumpdma(host, "stop"));
@@ -1031,7 +1028,7 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
 
     host->dma.direction = direction;
 
-    dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
+    dmac_write(host, DMAC_MASKREG, MASK_ON);
 
     if (direction == DMA_OUT) {
 #if (DEBUG & DEBUG_NO_WRITE)
@@ -1062,13 +1059,13 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
 				length);
 
 	length -= 1;
-	dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
-	dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
-	dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
-	dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
-	dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
-	dmac_write(host->dma.io_port, DMAC_MODECON, mode);
-	dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+	dmac_write(host, DMAC_TXCNTLO, length);
+	dmac_write(host, DMAC_TXCNTHI, length >> 8);
+	dmac_write(host, DMAC_TXADRLO, address);
+	dmac_write(host, DMAC_TXADRMD, address >> 8);
+	dmac_write(host, DMAC_TXADRHI, 0);
+	dmac_write(host, DMAC_MODECON, mode);
+	dmac_write(host, DMAC_MASKREG, MASK_OFF);
 
 #if (DEBUG & DEBUG_DMA)
 	DBG(host->SCpnt, acornscsi_dumpdma(host, "strt"));
@@ -1088,8 +1085,8 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
 static
 void acornscsi_dma_cleanup(AS_Host *host)
 {
-    dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
-    dmac_clearintr(host->dma.io_intr_clear);
+    dmac_write(host, DMAC_MASKREG, MASK_ON);
+    dmac_clearintr(host);
 
     /*
      * Check for a pending transfer
@@ -1116,7 +1113,7 @@ void acornscsi_dma_cleanup(AS_Host *host)
 	/*
 	 * Calculate number of bytes transferred from DMA.
 	 */
-	transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+	transferred = dmac_address(host) - host->dma.start_addr;
 	host->dma.transferred += transferred;
 
 	if (host->dma.direction == DMA_IN)
@@ -1152,13 +1149,13 @@ void acornscsi_dma_intr(AS_Host *host)
     DBG(host->SCpnt, acornscsi_dumpdma(host, "inti"));
 #endif
 
-    dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
-    dmac_clearintr(host->dma.io_intr_clear);
+    dmac_write(host, DMAC_MASKREG, MASK_ON);
+    dmac_clearintr(host);
 
     /*
      * Calculate amount transferred via DMA
      */
-    transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+    transferred = dmac_address(host) - host->dma.start_addr;
     host->dma.transferred += transferred;
 
     /*
@@ -1190,12 +1187,12 @@ void acornscsi_dma_intr(AS_Host *host)
 				length);
 
 	length -= 1;
-	dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
-	dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
-	dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
-	dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
-	dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
-	dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+	dmac_write(host, DMAC_TXCNTLO, length);
+	dmac_write(host, DMAC_TXCNTHI, length >> 8);
+	dmac_write(host, DMAC_TXADRLO, address);
+	dmac_write(host, DMAC_TXADRMD, address >> 8);
+	dmac_write(host, DMAC_TXADRHI, 0);
+	dmac_write(host, DMAC_MASKREG, MASK_OFF);
 
 #if (DEBUG & DEBUG_DMA)
 	DBG(host->SCpnt, acornscsi_dumpdma(host, "into"));
@@ -1209,15 +1206,15 @@ void acornscsi_dma_intr(AS_Host *host)
 	 * attention condition.  We continue giving one byte until
 	 * the device recognises the attention.
 	 */
-	if (dmac_read(host->dma.io_port, DMAC_STATUS) & STATUS_RQ0) {
+	if (dmac_read(host, DMAC_STATUS) & STATUS_RQ0) {
 	    acornscsi_abortcmd(host, host->SCpnt->tag);
 
-	    dmac_write(host->dma.io_port, DMAC_TXCNTLO, 0);
-	    dmac_write(host->dma.io_port, DMAC_TXCNTHI, 0);
-	    dmac_write(host->dma.io_port, DMAC_TXADRLO, 0);
-	    dmac_write(host->dma.io_port, DMAC_TXADRMD, 0);
-	    dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
-	    dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+	    dmac_write(host, DMAC_TXCNTLO, 0);
+	    dmac_write(host, DMAC_TXCNTHI, 0);
+	    dmac_write(host, DMAC_TXADRLO, 0);
+	    dmac_write(host, DMAC_TXADRMD, 0);
+	    dmac_write(host, DMAC_TXADRHI, 0);
+	    dmac_write(host, DMAC_MASKREG, MASK_OFF);
 	}
 #endif
     }
@@ -1271,9 +1268,9 @@ void acornscsi_dma_adjust(AS_Host *host)
 	    host->dma.xfer_setup = 0;
 	else {
 	    transferred += host->dma.start_addr;
-	    dmac_write(host->dma.io_port, DMAC_TXADRLO, transferred);
-	    dmac_write(host->dma.io_port, DMAC_TXADRMD, transferred >> 8);
-	    dmac_write(host->dma.io_port, DMAC_TXADRHI, transferred >> 16);
+	    dmac_write(host, DMAC_TXADRLO, transferred);
+	    dmac_write(host, DMAC_TXADRMD, transferred >> 8);
+	    dmac_write(host, DMAC_TXADRHI, transferred >> 16);
 #if (DEBUG & (DEBUG_DMA|DEBUG_WRITE))
 	    DBG(host->SCpnt, acornscsi_dumpdma(host, "adjo"));
 #endif
@@ -1292,12 +1289,12 @@ acornscsi_write_pio(AS_Host *host, char *bytes, int *ptr, int len, unsigned int
 	int my_ptr = *ptr;
 
 	while (my_ptr < len) {
-		asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+		asr = sbic_arm_read(host, SBIC_ASR);
 
 		if (asr & ASR_DBR) {
 			timeout = max_timeout;
 
-			sbic_arm_write(host->scsi.io_port, SBIC_DATA, bytes[my_ptr++]);
+			sbic_arm_write(host, SBIC_DATA, bytes[my_ptr++]);
 		} else if (asr & ASR_INT)
 			break;
 		else if (--timeout == 0)
@@ -1320,9 +1317,9 @@ acornscsi_sendcommand(AS_Host *host)
 {
 	struct scsi_cmnd *SCpnt = host->SCpnt;
 
-    sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
-    sbic_arm_writenext(host->scsi.io_port, 0);
-    sbic_arm_writenext(host->scsi.io_port, SCpnt->cmd_len - host->scsi.SCp.sent_command);
+    sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+    sbic_arm_writenext(host, 0);
+    sbic_arm_writenext(host, SCpnt->cmd_len - host->scsi.SCp.sent_command);
 
     acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
 
@@ -1351,7 +1348,7 @@ void acornscsi_sendmessage(AS_Host *host)
 
 	acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 1");
 
-	sbic_arm_write(host->scsi.io_port, SBIC_DATA, NOP);
+	sbic_arm_write(host, SBIC_DATA, NOP);
 
 	host->scsi.last_message = NOP;
 #if (DEBUG & DEBUG_MESSAGES)
@@ -1365,7 +1362,7 @@ void acornscsi_sendmessage(AS_Host *host)
 
 	acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 2");
 
-	sbic_arm_write(host->scsi.io_port, SBIC_DATA, msg->msg[0]);
+	sbic_arm_write(host, SBIC_DATA, msg->msg[0]);
 
 	host->scsi.last_message = msg->msg[0];
 #if (DEBUG & DEBUG_MESSAGES)
@@ -1382,9 +1379,9 @@ void acornscsi_sendmessage(AS_Host *host)
 	 *  initiator.  This provides an interlock so that the
 	 *  initiator can determine which message byte is rejected.
 	 */
-	sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
-	sbic_arm_writenext(host->scsi.io_port, 0);
-	sbic_arm_writenext(host->scsi.io_port, message_length);
+	sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+	sbic_arm_writenext(host, 0);
+	sbic_arm_writenext(host, message_length);
 	acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
 
 	msgnr = 0;
@@ -1421,7 +1418,7 @@ void acornscsi_readstatusbyte(AS_Host *host)
 {
     acornscsi_sbic_issuecmd(host, CMND_XFERINFO|CMND_SBT);
     acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "reading status byte");
-    host->scsi.SCp.Status = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+    host->scsi.SCp.Status = sbic_arm_read(host, SBIC_DATA);
 }
 
 /*
@@ -1438,12 +1435,12 @@ unsigned char acornscsi_readmessagebyte(AS_Host *host)
 
     acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "for message byte");
 
-    message = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+    message = sbic_arm_read(host, SBIC_DATA);
 
     /* wait for MSGIN-XFER-PAUSED */
     acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after message byte");
 
-    sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+    sbic_arm_read(host, SBIC_SSR);
 
     return message;
 }
@@ -1480,7 +1477,7 @@ void acornscsi_message(AS_Host *host)
 
 	    /* wait for next msg-in */
 	    acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after negate ack");
-	    sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+	    sbic_arm_read(host, SBIC_SSR);
 	}
     } while (msgidx < msglen);
 
@@ -1602,7 +1599,7 @@ void acornscsi_message(AS_Host *host)
 		    host->host->host_no, acornscsi_target(host));
 	    host->device[host->SCpnt->device->id].sync_xfer = SYNCHTRANSFER_2DBA;
 	    host->device[host->SCpnt->device->id].sync_state = SYNC_ASYNCHRONOUS;
-	    sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+	    sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
 	    break;
 
 	default:
@@ -1652,7 +1649,7 @@ void acornscsi_message(AS_Host *host)
 		host->device[host->SCpnt->device->id].sync_xfer =
 			calc_sync_xfer(period * 4, length);
 	    }
-	    sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+	    sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
 	    break;
 #else
 	    /* We do not accept synchronous transfers.  Respond with a
@@ -1792,10 +1789,10 @@ int acornscsi_starttransfer(AS_Host *host)
 
     residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred;
 
-    sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
-    sbic_arm_writenext(host->scsi.io_port, residual >> 16);
-    sbic_arm_writenext(host->scsi.io_port, residual >> 8);
-    sbic_arm_writenext(host->scsi.io_port, residual);
+    sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+    sbic_arm_writenext(host, residual >> 16);
+    sbic_arm_writenext(host, residual >> 8);
+    sbic_arm_writenext(host, residual);
     acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
     return 1;
 }
@@ -1816,7 +1813,7 @@ int acornscsi_reconnect(AS_Host *host)
 {
     unsigned int target, lun, ok = 0;
 
-    target = sbic_arm_read(host->scsi.io_port, SBIC_SOURCEID);
+    target = sbic_arm_read(host, SBIC_SOURCEID);
 
     if (!(target & 8))
 	printk(KERN_ERR "scsi%d: invalid source id after reselection "
@@ -1832,7 +1829,7 @@ int acornscsi_reconnect(AS_Host *host)
 	host->SCpnt = NULL;
     }
 
-    lun = sbic_arm_read(host->scsi.io_port, SBIC_DATA) & 7;
+    lun = sbic_arm_read(host, SBIC_DATA) & 7;
 
     host->scsi.reconnected.target = target;
     host->scsi.reconnected.lun = lun;
@@ -1952,7 +1949,7 @@ static
 void acornscsi_abortcmd(AS_Host *host, unsigned char tag)
 {
     host->scsi.phase = PHASE_ABORTED;
-    sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_ASSERTATN);
+    sbic_arm_write(host, SBIC_CMND, CMND_ASSERTATN);
 
     msgqueue_flush(&host->scsi.msgs);
 #ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
@@ -1979,11 +1976,11 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
 {
     unsigned int asr, ssr;
 
-    asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+    asr = sbic_arm_read(host, SBIC_ASR);
     if (!(asr & ASR_INT))
 	return INTR_IDLE;
 
-    ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+    ssr = sbic_arm_read(host, SBIC_SSR);
 
 #if (DEBUG & DEBUG_PHASES)
     print_sbic_status(asr, ssr, host->scsi.phase);
@@ -1999,15 +1996,15 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
 	printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n",
 		host->host->host_no);
 	/* setup sbic - WD33C93A */
-	sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
-	sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+	sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+	sbic_arm_write(host, SBIC_CMND, CMND_RESET);
 	return INTR_IDLE;
 
     case 0x01:				/* reset state - advanced			*/
-	sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
-	sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
-	sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
-	sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+	sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+	sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+	sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+	sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
 	msgqueue_flush(&host->scsi.msgs);
 	return INTR_IDLE;
 
@@ -2025,10 +2022,10 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
 	    msgqueue_flush(&host->scsi.msgs);
 	    host->dma.transferred = host->scsi.SCp.scsi_xferred;
 	    /* 33C93 gives next interrupt indicating bus phase */
-	    asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+	    asr = sbic_arm_read(host, SBIC_ASR);
 	    if (!(asr & ASR_INT))
 		break;
-	    ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+	    ssr = sbic_arm_read(host, SBIC_SSR);
 	    ADD_STATUS(8, ssr, host->scsi.phase, 1);
 	    ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, 1);
 	    goto connected;
@@ -2476,11 +2473,11 @@ acornscsi_intr(int irq, void *dev_id)
     do {
 	ret = INTR_IDLE;
 
-	iostatus = inb(host->card.io_intr);
+	iostatus = readb(host->fast + INT_REG);
 
 	if (iostatus & 2) {
 	    acornscsi_dma_intr(host);
-	    iostatus = inb(host->card.io_intr);
+	    iostatus = readb(host->fast + INT_REG);
 	}
 
 	if (iostatus & 8)
@@ -2655,7 +2652,7 @@ static enum res_abort acornscsi_do_abort(AS_Host *host, struct scsi_cmnd *SCpnt)
 		 * busylun bit.
 		 */
 		case PHASE_CONNECTED:
-			sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_DISCONNECT);
+			sbic_arm_write(host, SBIC_CMND, CMND_DISCONNECT);
 			host->SCpnt = NULL;
 			res = res_success_clear;
 			break;
@@ -2699,8 +2696,8 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
 #if (DEBUG & DEBUG_ABORT)
 	{
 		int asr, ssr;
-		asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
-		ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+		asr = sbic_arm_read(host, SBIC_ASR);
+		ssr = sbic_arm_read(host, SBIC_SSR);
 
 		printk(KERN_WARNING "acornscsi_abort: ");
 		print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2731,9 +2728,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
 //#if (DEBUG & DEBUG_ABORT)
 		printk("success\n");
 //#endif
-		SCpnt->result = DID_ABORT << 16;
-		SCpnt->scsi_done(SCpnt);
-		result = SCSI_ABORT_SUCCESS;
+		result = SUCCESS;
 		break;
 
 	/*
@@ -2745,7 +2740,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
 //#if (DEBUG & DEBUG_ABORT)
 		printk("snooze\n");
 //#endif
-		result = SCSI_ABORT_SNOOZE;
+		result = FAILED;
 		break;
 
 	/*
@@ -2755,11 +2750,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
 	default:
 	case res_not_running:
 		acornscsi_dumplog(host, SCpnt->device->id);
-#if (DEBUG & DEBUG_ABORT)
-		result = SCSI_ABORT_SNOOZE;
-#else
-		result = SCSI_ABORT_NOT_RUNNING;
-#endif
+		result = FAILED;
 //#if (DEBUG & DEBUG_ABORT)
 		printk("not running\n");
 //#endif
@@ -2770,13 +2761,12 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
 }
 
 /*
- * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+ * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt)
  * Purpose  : reset a command on this host/reset this host
  * Params   : SCpnt  - command causing reset
- *	      result - what type of reset to perform
  * Returns  : one of SCSI_RESET_ macros
  */
-int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+int acornscsi_bus_reset(struct scsi_cmnd *SCpnt)
 {
 	AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
 	struct scsi_cmnd *SCptr;
@@ -2787,8 +2777,8 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
     {
 	int asr, ssr;
 
-	asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
-	ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+	asr = sbic_arm_read(host, SBIC_ASR);
+	ssr = sbic_arm_read(host, SBIC_SSR);
 
 	printk(KERN_WARNING "acornscsi_reset: ");
 	print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2798,28 +2788,16 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
 
     acornscsi_dma_stop(host);
 
-    SCptr = host->SCpnt;
-
     /*
      * do hard reset.  This resets all devices on this host, and so we
      * must set the reset status on all commands.
      */
     acornscsi_resetcard(host);
 
-    /*
-     * report reset on commands current connected/disconnected
-     */
-    acornscsi_reportstatus(&host->SCpnt, &SCptr, DID_RESET);
-
     while ((SCptr = queue_remove(&host->queues.disconnected)) != NULL)
-	acornscsi_reportstatus(&SCptr, &SCpnt, DID_RESET);
-
-    if (SCpnt) {
-	SCpnt->result = DID_RESET << 16;
-	SCpnt->scsi_done(SCpnt);
-    }
+	;
 
-    return SCSI_RESET_BUS_RESET | SCSI_RESET_HOST_RESET | SCSI_RESET_SUCCESS;
+    return SUCCESS;
 }
 
 /*==============================================================================================
@@ -2850,7 +2828,7 @@ char *acornscsi_info(struct Scsi_Host *host)
     " LINK"
 #endif
 #if (DEBUG & DEBUG_NO_WRITE)
-    " NOWRITE ("NO_WRITE_STR")"
+    " NOWRITE (" __stringify(NO_WRITE) ")"
 #endif
 		, host->hostt->name, host->io_port, host->irq,
 		VER_MAJOR, VER_MINOR, VER_PATCH);
@@ -2881,15 +2859,15 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
     " LINK"
 #endif
 #if (DEBUG & DEBUG_NO_WRITE)
-    " NOWRITE ("NO_WRITE_STR")"
+    " NOWRITE (" __stringify(NO_WRITE) ")"
 #endif
 		"\n\n", VER_MAJOR, VER_MINOR, VER_PATCH);
 
-    p += sprintf(p,	"SBIC: WD33C93A  Address: %08X  IRQ : %d\n",
-			host->scsi.io_port, host->scsi.irq);
+    p += sprintf(p,	"SBIC: WD33C93A  Address: %p    IRQ : %d\n",
+			host->base + SBIC_REGIDX, host->scsi.irq);
 #ifdef USE_DMAC
-    p += sprintf(p,	"DMAC: uPC71071  Address: %08X  IRQ : %d\n\n",
-			host->dma.io_port, host->scsi.irq);
+    p += sprintf(p,	"DMAC: uPC71071  Address: %p  IRQ : %d\n\n",
+			host->base + DMAC_OFFSET, host->scsi.irq);
 #endif
 
     p += sprintf(p,	"Statistics:\n"
@@ -2976,9 +2954,8 @@ static struct scsi_host_template acornscsi_template = {
 	.name			= "AcornSCSI",
 	.info			= acornscsi_info,
 	.queuecommand		= acornscsi_queuecmd,
-#warning fixme
-	.abort			= acornscsi_abort,
-	.reset			= acornscsi_reset,
+	.eh_abort_handler	= acornscsi_abort,
+	.eh_bus_reset_handler	= acornscsi_bus_reset,
 	.can_queue		= 16,
 	.this_id		= 7,
 	.sg_tablesize		= SG_ALL,
@@ -2992,48 +2969,37 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	struct Scsi_Host *host;
 	AS_Host *ashost;
-	int ret = -ENOMEM;
+	int ret;
 
-	host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
-	if (!host)
+	ret = ecard_request_resources(ec);
+	if (ret)
 		goto out;
 
+	host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
+	if (!host) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
 	ashost = (AS_Host *)host->hostdata;
 
-	host->io_port = ecard_address(ec, ECARD_MEMC, 0);
-	host->irq = ec->irq;
+	ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
+	ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+	if (!ashost->base || !ashost->fast)
+		goto out_put;
 
-	ashost->host		= host;
-	ashost->scsi.io_port	= ioaddr(host->io_port + 0x800);
-	ashost->scsi.irq	= host->irq;
-	ashost->card.io_intr	= POD_SPACE(host->io_port) + 0x800;
-	ashost->card.io_page	= POD_SPACE(host->io_port) + 0xc00;
-	ashost->card.io_ram	= ioaddr(host->io_port);
-	ashost->dma.io_port	= host->io_port + 0xc00;
-	ashost->dma.io_intr_clear = POD_SPACE(host->io_port) + 0x800;
+	host->irq = ec->irq;
+	ashost->host = host;
+	ashost->scsi.irq = host->irq;
 
-	ec->irqaddr	= (char *)ioaddr(ashost->card.io_intr);
+	ec->irqaddr	= ashost->fast + INT_REG;
 	ec->irqmask	= 0x0a;
 
-	ret = -EBUSY;
-	if (!request_region(host->io_port + 0x800, 2, "acornscsi(sbic)"))
-		goto err_1;
-	if (!request_region(ashost->card.io_intr, 1, "acornscsi(intr)"))
-		goto err_2;
-	if (!request_region(ashost->card.io_page, 1, "acornscsi(page)"))
-		goto err_3;
-#ifdef USE_DMAC
-	if (!request_region(ashost->dma.io_port, 256, "acornscsi(dmac)"))
-		goto err_4;
-#endif
-	if (!request_region(host->io_port, 2048, "acornscsi(ram)"))
-		goto err_5;
-
 	ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
 	if (ret) {
 		printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
 			host->host_no, ashost->scsi.irq, ret);
-		goto err_6;
+		goto out_put;
 	}
 
 	memset(&ashost->stats, 0, sizeof (ashost->stats));
@@ -3045,27 +3011,22 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	ret = scsi_add_host(host, &ec->dev);
 	if (ret)
-		goto err_7;
+		goto out_irq;
 
 	scsi_scan_host(host);
 	goto out;
 
- err_7:
+ out_irq:
 	free_irq(host->irq, ashost);
- err_6:
-	release_region(host->io_port, 2048);
- err_5:
-#ifdef USE_DMAC
-	release_region(ashost->dma.io_port, 256);
-#endif
- err_4:
-	release_region(ashost->card.io_page, 1);
- err_3:
-	release_region(ashost->card.io_intr, 1);    
- err_2:
-	release_region(host->io_port + 0x800, 2);
- err_1:
+	msgqueue_free(&ashost->scsi.msgs);
+	queue_free(&ashost->queues.disconnected);
+	queue_free(&ashost->queues.issue);
+ out_put:
+	ecardm_iounmap(ec, ashost->fast);
+	ecardm_iounmap(ec, ashost->base);
 	scsi_host_put(host);
+ out_release:
+	ecard_release_resources(ec);
  out:
 	return ret;
 }
@@ -3081,20 +3042,17 @@ static void __devexit acornscsi_remove(struct expansion_card *ec)
 	/*
 	 * Put card into RESET state
 	 */
-	outb(0x80, ashost->card.io_page);
+	writeb(0x80, ashost->fast + PAGE_REG);
 
 	free_irq(host->irq, ashost);
 
-	release_region(host->io_port + 0x800, 2);
-	release_region(ashost->card.io_intr, 1);
-	release_region(ashost->card.io_page, 1);
-	release_region(ashost->dma.io_port, 256);
-	release_region(host->io_port, 2048);
-
 	msgqueue_free(&ashost->scsi.msgs);
 	queue_free(&ashost->queues.disconnected);
 	queue_free(&ashost->queues.issue);
+	ecardm_iounmap(ec, ashost->fast);
+	ecardm_iounmap(ec, ashost->base);
 	scsi_host_put(host);
+	ecard_release_resources(ec);
 }
 
 static const struct ecard_id acornscsi_cids[] = {
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index d11424b89f42..8d2172a0b351 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -179,7 +179,6 @@
 
 /* miscellaneous internal variables */
 
-#define POD_SPACE(x)	((x) + 0xd0000)
 #define MASK_ON		(MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
 #define MASK_OFF	(MASKREG_M3|MASKREG_M2|MASKREG_M1)
 
@@ -279,10 +278,11 @@ typedef struct acornscsi_hostdata {
     struct Scsi_Host	*host;			/* host					*/
     struct scsi_cmnd	*SCpnt;			/* currently processing command		*/
     struct scsi_cmnd	*origSCpnt;		/* original connecting command		*/
+    void __iomem	*base;			/* memc base address 			*/
+    void __iomem	*fast;			/* fast ioc base address		*/
 
     /* driver information */
     struct {
-	unsigned int	io_port;		/* base address of WD33C93		*/
 	unsigned int	irq;			/* interrupt				*/
 	phase_t		phase;			/* current phase			*/
 
@@ -329,8 +329,6 @@ typedef struct acornscsi_hostdata {
 
     /* DMA info */
     struct {
-	unsigned int	io_port;		/* base address of DMA controller	*/
-	unsigned int	io_intr_clear;		/* address of DMA interrupt clear	*/
 	unsigned int	free_addr;		/* next free address			*/
 	unsigned int	start_addr;		/* start address of current transfer	*/
 	dmadir_t	direction;		/* dma direction			*/
@@ -345,9 +343,6 @@ typedef struct acornscsi_hostdata {
 
     /* card info */
     struct {
-	unsigned int	io_intr;		/* base address of interrupt id reg	*/
-	unsigned int	io_page;		/* base address of page reg		*/
-	unsigned int	io_ram;			/* base address of RAM access		*/
 	unsigned char	page_reg;		/* current setting of page reg		*/
     } card;