diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-17 16:38:48 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-17 16:38:48 -0800 |
| commit | fc6f0700d5cd54b5f8b30c4f0d93b06a6ba04b81 (patch) | |
| tree | ed0f6fa02690d08a2b9b57f8735d13f11fd1140f /drivers/scsi | |
| parent | dbfc985195410dad803c845743c63cd73bd1fe32 (diff) | |
| parent | 53ca353594a254e6bd45ccf2d405aa31bcbb7091 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
[SCSI] 3w-9xxx fix bug in sgl loading
[SCSI] fcoe, libfc: adds enable/disable for fcoe interface
[SCSI] libfc: reduce hold time on SCSI host lock
[SCSI] libfc: remote port gets stuck in restart state without really restarting
[SCSI] pm8001: misc code cleanup
[SCSI] pm8001: enable read HBA SAS address from VPD
[SCSI] pm8001: do not reset local sata as it will not be found if reset
[SCSI] pm8001: bit set pm8001_ha->flags
[SCSI] pm8001:fix potential NULL pointer dereference
[SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device.
[SCSI] pm8001: fix endian issues with SAS address
[SCSI] pm8001: enhance error handle for IO patch
[SCSI] pm8001: Fix for sata io circular lock dependency.
[SCSI] hpsa: add driver for HP Smart Array controllers.
[SCSI] cxgb3i: always use negative errno in case of error
[SCSI] bnx2i: minor code cleanup and update driver version
[SCSI] bnx2i: Task management ABORT TASK fixes
[SCSI] bnx2i: update CQ arming algorith for 5771x chipsets
[SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified
[SCSI] bnx2i: Add 5771E device support to bnx2i driver
...
Diffstat (limited to 'drivers/scsi')
45 files changed, 4905 insertions, 355 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 3bf75924741f..84d3bbaa95e7 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -76,6 +76,7 @@ Fix bug in twa_get_param() on 4GB+. Use pci_resource_len() for ioremap(). 2.26.02.012 - Add power management support. + 2.26.02.013 - Fix bug in twa_load_sgl(). */ #include <linux/module.h> @@ -100,7 +101,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.012" +#define TW_DRIVER_VERSION "2.26.02.013" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -1382,10 +1383,12 @@ static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_comm newcommand = &full_command_packet->command.newcommand; newcommand->request_id__lunl = cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); - newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); - newcommand->sg_list[0].length = cpu_to_le32(length); + if (length) { + newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); + newcommand->sg_list[0].length = cpu_to_le32(length); + } newcommand->sgl_entries__lunh = - cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), 1)); + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); } else { oldcommand = &full_command_packet->command.oldcommand; oldcommand->request_id = request_id; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 36900c71a592..9191d1ea6451 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -388,6 +388,16 @@ config BLK_DEV_3W_XXXX_RAID Please read the comments at the top of <file:drivers/scsi/3w-xxxx.c>. +config SCSI_HPSA + tristate "HP Smart Array SCSI driver" + depends on PCI && SCSI + help + This driver supports HP Smart Array Controllers (circa 2009). + It is a SCSI alternative to the cciss driver, which is a block + driver. Anyone wishing to use HP Smart Array controllers who + would prefer the devices be presented to linux as SCSI devices, + rather than as generic block devices should say Y here. + config SCSI_3W_9XXX tristate "3ware 9xxx SATA-RAID support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 280d3c657d60..92a8c500b23d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ obj-$(CONFIG_SCSI_PAS16) += pas16.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o +obj-$(CONFIG_SCSI_HPSA) += hpsa.o obj-$(CONFIG_SCSI_DTC3280) += dtc.o obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c index 698a527d6cca..f008708f1b08 100644 --- a/drivers/scsi/be2iscsi/be_cmds.c +++ b/drivers/scsi/be2iscsi/be_cmds.c @@ -135,11 +135,15 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba) while ((compl = be_mcc_compl_get(phba))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ - BUG_ON(!is_link_state_evt(compl->flags)); + if (is_link_state_evt(compl->flags)) + /* Interpret compl as a async link evt */ + beiscsi_async_link_state_process(phba, + (struct be_async_event_link_state *) compl); + else + SE_DEBUG(DBG_LVL_1, + " Unsupported Async Event, flags" + " = 0x%08x \n", compl->flags); - /* Interpret compl as a async link evt */ - beiscsi_async_link_state_process(phba, - (struct be_async_event_link_state *) compl); } else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) { status = be_mcc_compl_process(ctrl, compl); atomic_dec(&phba->ctrl.mcc_obj.q.used); diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index 2b973f3c2eb2..6cf9dc37d78b 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -684,6 +684,7 @@ extern unsigned int error_mask1, error_mask2; extern u64 iscsi_error_mask; extern unsigned int en_tcp_dack; extern unsigned int event_coal_div; +extern unsigned int event_coal_min; extern struct scsi_transport_template *bnx2i_scsi_xport_template; extern struct iscsi_transport bnx2i_iscsi_transport; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 5c8d7630c13e..1af578dec276 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) { struct bnx2i_5771x_cq_db *cq_db; u16 cq_index; + u16 next_index; + u32 num_active_cmds; + + /* Coalesce CQ entries only on 10G devices */ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) return; + /* Do not update CQ DB multiple times before firmware writes + * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious + * interrupts and other unwanted results + */ + cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; + if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) + return; + if (action == CNIC_ARM_CQE) { - cq_index = ep->qp.cqe_exp_seq_sn + - ep->num_active_cmds / event_coal_div; - cq_index %= (ep->qp.cqe_size * 2 + 1); - if (!cq_index) { + num_active_cmds = ep->num_active_cmds; + if (num_active_cmds <= event_coal_min) + next_index = 1; + else + next_index = event_coal_min + + (num_active_cmds - event_coal_min) / event_coal_div; + if (!next_index) + next_index = 1; + cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1; + if (cq_index > ep->qp.cqe_size * 2) + cq_index -= ep->qp.cqe_size * 2; + if (!cq_index) cq_index = 1; - cq_db = (struct bnx2i_5771x_cq_db *) - ep->qp.cq_pgtbl_virt; - cq_db->sqn[0] = cq_index; - } + + cq_db->sqn[0] = cq_index; } } @@ -366,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, struct bnx2i_cmd *bnx2i_cmd; struct bnx2i_tmf_request *tmfabort_wqe; u32 dword; + u32 scsi_lun[2]; bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data; tmfabort_hdr = (struct iscsi_tm *)mtask->hdr; @@ -376,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, tmfabort_wqe->op_attr = 0; tmfabort_wqe->op_attr = ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK; - tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]); - tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]); tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14)); tmfabort_wqe->reserved2 = 0; tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn); ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt); - if (!ctask || ctask->sc) + if (!ctask || !ctask->sc) /* * the iscsi layer must have completed the cmd while this * was starting up. + * + * Note: In the case of a SCSI cmd timeout, the task's sc + * is still active; hence ctask->sc != 0 + * In this case, the task must be aborted */ return 0; + ref_sc = ctask->sc; + /* Retrieve LUN directly from the ref_sc */ + int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun); + tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]); + tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]); + if (ref_sc->sc_data_direction == DMA_TO_DEVICE) dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT); else dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT); - tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt); + tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK)); tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn); tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma; diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 0c4210d48ee8..6d8172e781cf 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -17,8 +17,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list); static u32 adapter_count; #define DRV_MODULE_NAME "bnx2i" -#define DRV_MODULE_VERSION "2.0.1e" -#define DRV_MODULE_RELDATE "June 22, 2009" +#define DRV_MODULE_VERSION "2.1.0" +#define DRV_MODULE_RELDATE "Dec 06, 2009" static char version[] __devinitdata = "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \ @@ -32,6 +32,10 @@ MODULE_VERSION(DRV_MODULE_VERSION); static DEFINE_MUTEX(bnx2i_dev_lock); +unsigned int event_coal_min = 24; +module_param(event_coal_min, int, 0664); +MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands"); + unsigned int event_coal_div = 1; module_param(event_coal_div, int, 0664); MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor"); @@ -83,8 +87,12 @@ void bnx2i_identify_device(struct bnx2i_hba *hba) set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); hba->mail_queue_access = BNX2I_MQ_BIN_MODE; } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 || - hba->pci_did == PCI_DEVICE_ID_NX2_57711) + hba->pci_did == PCI_DEVICE_ID_NX2_57711 || + hba->pci_did == PCI_DEVICE_ID_NX2_57711E) set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type); + else + printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", + hba->pci_did); } @@ -363,7 +371,7 @@ static int __init bnx2i_mod_init(void) printk(KERN_INFO "%s", version); - if (!is_power_of_2(sq_size)) + if (sq_size && !is_power_of_2(sq_size)) sq_size = roundup_pow_of_two(sq_size); mutex_init(&bnx2i_dev_lock); diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 132898c88d5e..33b2294625bb 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -485,7 +485,6 @@ static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba, struct iscsi_task *task = session->cmds[i]; struct bnx2i_cmd *cmd = task->dd_data; - /* Anil */ task->hdr = &cmd->hdr; task->hdr_max = sizeof(struct iscsi_hdr); @@ -765,7 +764,6 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) hba->pci_svid = hba->pcidev->subsystem_vendor; hba->pci_func = PCI_FUNC(hba->pcidev->devfn); hba->pci_devno = PCI_SLOT(hba->pcidev->devfn); - bnx2i_identify_device(hba); bnx2i_identify_device(hba); bnx2i_setup_host_queue_size(hba, shost); diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index c1d5be4adf9c..26ffdcd5a437 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -291,7 +291,7 @@ static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) c3cn_hold(c3cn); spin_lock_bh(&c3cn->lock); if (c3cn->state == C3CN_STATE_CONNECTING) - fail_act_open(c3cn, EHOSTUNREACH); + fail_act_open(c3cn, -EHOSTUNREACH); spin_unlock_bh(&c3cn->lock); c3cn_put(c3cn); __kfree_skb(skb); @@ -792,18 +792,18 @@ static int act_open_rpl_status_to_errno(int status) { switch (status) { case CPL_ERR_CONN_RESET: - return ECONNREFUSED; + return -ECONNREFUSED; case CPL_ERR_ARP_MISS: - return EHOSTUNREACH; + return -EHOSTUNREACH; case CPL_ERR_CONN_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; case CPL_ERR_TCAM_FULL: - return ENOMEM; + return -ENOMEM; case CPL_ERR_CONN_EXIST: cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); - return EADDRINUSE; + return -EADDRINUSE; default: - return EIO; + return -EIO; } } @@ -817,7 +817,7 @@ static void act_open_retry_timer(unsigned long data) spin_lock_bh(&c3cn->lock); skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); if (!skb) - fail_act_open(c3cn, ENOMEM); + fail_act_open(c3cn, -ENOMEM); else { skb->sk = (struct sock *)c3cn; set_arp_failure_handler(skb, act_open_req_arp_failure); @@ -966,14 +966,14 @@ static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, case CPL_ERR_BAD_SYN: /* fall through */ case CPL_ERR_CONN_RESET: return c3cn->state > C3CN_STATE_ESTABLISHED ? - EPIPE : ECONNRESET; + -EPIPE : -ECONNRESET; case CPL_ERR_XMIT_TIMEDOUT: case CPL_ERR_PERSIST_TIMEDOUT: case CPL_ERR_FINWAIT2_TIMEDOUT: case CPL_ERR_KEEPALIVE_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; default: - return EIO; + return -EIO; } } @@ -1563,7 +1563,7 @@ free_tid: s3_free_atid(cdev, c3cn->tid); c3cn->tid = 0; out_err: - return -1; + return -EINVAL; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 709105071177..1fe3b0f1f3c9 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -388,8 +388,8 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) if (err > 0) { int pdulen = err; - cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", - task, skb, skb->len, skb->data_len, err); + cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", + task, skb, skb->len, skb->data_len, err); if (task->conn->hdrdgst_en) pdulen += ISCSI_DIGEST_SIZE; diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 47cfe1c49c3e..1a660191a905 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -748,6 +748,8 @@ static const struct scsi_dh_devlist rdac_dev_list[] = { {"IBM", "1724"}, {"IBM", "1726"}, {"IBM", "1742"}, + {"IBM", "1745"}, + {"IBM", "1746"}, {"IBM", "1814"}, {"IBM", "1815"}, {"IBM", "1818"}, diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index a30ffaa1222c..e3896fcb06e3 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -101,6 +101,8 @@ static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *); static int fcoe_create(const char *, struct kernel_param *); static int fcoe_destroy(const char *, struct kernel_param *); +static int fcoe_enable(const char *, struct kernel_param *); +static int fcoe_disable(const char *, struct kernel_param *); static struct fc_seq *fcoe_elsct_send(struct fc_lport *, u32 did, struct fc_frame *, @@ -115,10 +117,16 @@ static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *); module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(create, "string"); -MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in."); +MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface"); module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(destroy, "string"); -MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe"); +MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface"); +module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(enable, "string"); +MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface."); +module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(disable, "string"); +MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface."); /* notification function for packets from net device */ static struct notifier_block fcoe_notifier = { @@ -545,6 +553,23 @@ static void fcoe_queue_timer(ulong lport) } /** + * fcoe_get_wwn() - Get the world wide name from LLD if it supports it + * @netdev: the associated net device + * @wwn: the output WWN + * @type: the type of WWN (WWPN or WWNN) + * + * Returns: 0 for success + */ +static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type) +{ + const struct net_device_ops *ops = netdev->netdev_ops; + + if (ops->ndo_fcoe_get_wwn) + return ops->ndo_fcoe_get_wwn(netdev, wwn, type); + return -EINVAL; +} + +/** * fcoe_netdev_config() - Set up net devive for SW FCoE * @lport: The local port that is associated with the net device * @netdev: The associated net device @@ -611,9 +636,13 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev) */ if (netdev->priv_flags & IFF_802_1Q_VLAN) vid = vlan_dev_vlan_id(netdev); - wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); + + if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN)) + wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); fc_set_wwnn(lport, wwnn); - wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 2, vid); + if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN)) + wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, + 2, vid); fc_set_wwpn(lport, wwpn); } @@ -1838,6 +1867,104 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** + * fcoe_disable() - Disables a FCoE interface + * @buffer: The name of the Ethernet interface to be disabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_disable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + fc_fabric_logoff(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + +/** + * fcoe_enable() - Enables a FCoE interface + * @buffer: The name of the Ethernet interface to be enabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_enable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + rc = fc_fabric_login(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + +/** * fcoe_destroy() - Destroy a FCoE interface * @buffer: The name of the Ethernet interface to be destroyed * @kp: The associated kernel parameter diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c new file mode 100644 index 000000000000..bb96fdd58e23 --- /dev/null +++ b/drivers/scsi/hpsa.c @@ -0,0 +1,3531 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/timer.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/blktrace_api.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/completion.h> +#include <linux/moduleparam.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <linux/cciss_ioctl.h> +#include <linux/string.h> +#include <linux/bitmap.h> +#include <asm/atomic.h> +#include <linux/kthread.h> +#include "hpsa_cmd.h" +#include "hpsa.h" + +/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ +#define HPSA_DRIVER_VERSION "1.0.0" +#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" + +/* How long to wait (in milliseconds) for board to go into simple mode */ +#define MAX_CONFIG_WAIT 30000 +#define MAX_IOCTL_CONFIG_WAIT 1000 + +/*define how many times we will try a command because of bus resets */ +#define MAX_CMD_RETRIES 3 + +/* Embedded module documentation macros - see modules.h */ +MODULE_AUTHOR("Hewlett-Packard Company"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ + HPSA_DRIVER_VERSION); +MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); +MODULE_VERSION(HPSA_DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static int hpsa_allow_any; +module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(hpsa_allow_any, + "Allow hpsa driver to access unknown HP Smart Array hardware"); + +/* define the PCI info for the cards we can control */ +static const struct pci_device_id hpsa_pci_device_id[] = { + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, + {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); + +/* board_id = Subsystem Device ID & Vendor ID + * product = Marketing Name for the board + * access = Address of the struct of function pointers + */ +static struct board_type products[] = { + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x323d103c, "Smart Array P700M", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324a103C, "Smart Array P712m", &SA5_access}, + {0x324b103C, "Smart Array P711m", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, +}; + +static int number_of_controllers; + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id); +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); +static void start_io(struct ctlr_info *h); + +#ifdef CONFIG_COMPAT +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); +#endif + +static void cmd_free(struct ctlr_info *h, struct CommandList *c); +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); +static struct CommandList *cmd_alloc(struct ctlr_info *h); +static struct CommandList *cmd_special_alloc(struct ctlr_info *h); +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)); + +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); +static int hpsa_slave_alloc(struct scsi_device *sdev); +static void hpsa_slave_destroy(struct scsi_device *sdev); + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf); +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c); +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c); + +static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); + +static struct device_attribute *hpsa_sdev_attrs[] = { + &dev_attr_raid_level, + &dev_attr_lunid, + &dev_attr_unique_id, + NULL, +}; + +static struct device_attribute *hpsa_shost_attrs[] = { + &dev_attr_rescan, + NULL, +}; + +static struct scsi_host_template hpsa_driver_template = { + .module = THIS_MODULE, + .name = "hpsa", + .proc_name = "hpsa", + .queuecommand = hpsa_scsi_queue_command, + .can_queue = 512, + .this_id = -1, + .sg_tablesize = MAXSGENTRIES, + .cmd_per_lun = 512, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = hpsa_eh_device_reset_handler, + .ioctl = hpsa_ioctl, + .slave_alloc = hpsa_slave_alloc, + .slave_destroy = hpsa_slave_destroy, +#ifdef CONFIG_COMPAT + .compat_ioctl = hpsa_compat_ioctl, +#endif + .sdev_attrs = hpsa_sdev_attrs, + .shost_attrs = hpsa_shost_attrs, +}; + +static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) +{ + unsigned long *priv = shost_priv(sdev->host); + return (struct ctlr_info *) *priv; +} + +static struct task_struct *hpsa_scan_thread; +static DEFINE_MUTEX(hpsa_scan_mutex); +static LIST_HEAD(hpsa_scan_q); +static int hpsa_scan_func(void *data); + +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + /* + * If we don't get the lock, it means the driver is unloading + * and there's no point in scheduling a new scan. + */ + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry(test_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + INIT_COMPLETION(h->scan_wait); + list_add_tail(&h->scan_list, &hpsa_scan_q); + ret = 1; + } + mutex_unlock(&hpsa_scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. The controller + * can be in one of three states: + * 1. Doesn't need a scan + * 2. On the scan list, but not scanning yet (we remove it) + * 3. Busy scanning (and not on the list). In this case we want to wait for + * the scan to complete to make sure the scanning thread for this + * controller is completely idle. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { /* state 2. */ + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&hpsa_scan_mutex); + return; + } + } + if (h->busy_scanning) { /* state 3. */ + mutex_unlock(&hpsa_scan_mutex); + wait_for_completion(&h->scan_wait); + } else { /* state 1, nothing to do. */ + mutex_unlock(&hpsa_scan_mutex); + } +} + +/* hpsa_scan_func() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ +static int hpsa_scan_func(__attribute__((unused)) void *data) +{ + struct ctlr_info *h; + int host_no; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) + break; + + while (1) { + mutex_lock(&hpsa_scan_mutex); + if (list_empty(&hpsa_scan_q)) { + mutex_unlock(&hpsa_scan_mutex); + break; + } + h = list_entry(hpsa_scan_q.next, struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&hpsa_scan_mutex); + host_no = h->scsi_host ? h->scsi_host->host_no : -1; + hpsa_update_scsi_devices(h, host_no); + complete_all(&h->scan_wait); + mutex_lock(&hpsa_scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&hpsa_scan_mutex); + } + } + return 0; +} + +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) + return 0; + + switch (c->err_info->SenseInfo[12]) { + case STATE_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: a state change " + "detected, command retried\n", h->ctlr); + break; + case LUN_FAILED: + dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " + "detected, action required\n", h->ctlr); + break; + case REPORT_LUNS_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " + "changed\n", h->ctlr); + /* + * Here, we could call add_to_scan_list and wake up the scan thread, + * except that it's quite likely that we will get more than one + * REPORT_LUNS_CHANGED condition in quick succession, which means + * that those which occur after the first one will likely happen + * *during* the hpsa_scan_thread's rescan. And the rescan code is not + * robust enough to restart in the middle, undoing what it has already + * done, and it's not clear that it's even possible to do this, since + * part of what it does is notify the SCSI mid layer, which starts + * doing it's own i/o to read partition tables and so on, and the + * driver doesn't have visibility to know what might need undoing. + * In any event, if possible, it is horribly complicated to get right + * so we just don't do it for now. + * + * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + */ + break; + case POWER_OR_RESET: + dev_warn(&h->pdev->dev, "hpsa%d: a power on " + "or device reset detected\n", h->ctlr); + break; + case UNIT_ATTENTION_CLEARED: + dev_warn(&h->pdev->dev, "hpsa%d: unit attention " + "cleared by another initiator\n", h->ctlr); + break; + default: + dev_warn(&h->pdev->dev, "hpsa%d: unknown " + "unit attention detected\n", h->ctlr); + break; + } + return 1; +} + +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h; + struct Scsi_Host *shost = class_to_shost(dev); + unsigned long *priv = shost_priv(shost); + h = (struct ctlr_info *) *priv; + if (add_to_scan_list(h)) { + wake_up_process(hpsa_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + } + return count; +} + +/* Enqueuing and dequeuing functions for cmdlists. */ +static inline void addQ(struct hlist_head *list, struct CommandList *c) +{ + hlist_add_head(&c->list, list); +} + +static void enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c) +{ + unsigned long flags; + spin_lock_irqsave(&h->lock, flags); + addQ(&h->reqQ, c); + h->Qdepth++; + start_io(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static inline void removeQ(struct CommandList *c) +{ + if (WARN_ON(hlist_unhashed(&c->list))) + return; + hlist_del_init(&c->list); +} + +static inline int is_hba_lunid(unsigned char scsi3addr[]) +{ + return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; +} + +static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) +{ + return (scsi3addr[3] & 0xC0) == 0x40; +} + +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t l = 0; + int rlevel; + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + + /* Is this even a logical drive? */ + if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { + spin_unlock_irqrestore(&h->lock, flags); + l = snprintf(buf, PAGE_SIZE, "N/A\n"); + return l; + } + + rlevel = hdev->raid_level; + spin_unlock_irqrestore(&h->lock, flags); + if (rlevel < 0 || rlevel > RAID_UNKNOWN) + rlevel = RAID_UNKNOWN; + l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); + return l; +} + +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char lunid[8]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} + +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char sn[16]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(sn, hdev->device_id, sizeof(sn)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} + +static int hpsa_find_target_lun(struct ctlr_info *h, + unsigned char scsi3addr[], int bus, int *target, int *lun) +{ + /* finds an unused bus, target, lun for a new physical device + * assumes h->devlock is held + */ + int i, found = 0; + DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); + + memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); + + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i]->bus == bus && h->dev[i]->target != -1) + set_bit(h->dev[i]->target, lun_taken); + } + + for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { + if (!test_bit(i, lun_taken)) { + /* *bus = 1; */ + *target = i; + *lun = 0; + found = 1; + break; + } + } + return !found; +} + +/* Add an entry into h->dev[] array. */ +static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *device, + struct hpsa_scsi_dev_t *added[], int *nadded) +{ + /* assumes h->devlock is held */ + int n = h->ndevices; + int i; + unsigned char addr1[8], addr2[8]; + struct hpsa_scsi_dev_t *sd; + + if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { + dev_err(&h->pdev->dev, "too many devices, some will be " + "inaccessible.\n"); + return -1; + } + + /* physical devices do not have lun or target assigned until now. */ + if (device->lun != -1) + /* Logical device, lun is already assigned. */ + goto lun_assigned; + + /* If this device a non-zero lun of a multi-lun device + * byte 4 of the 8-byte LUN addr will contain the logical + * unit no, zero otherise. + */ + if (device->scsi3addr[4] == 0) { + /* This is not a non-zero lun of a multi-lun device */ + if (hpsa_find_target_lun(h, device->scsi3addr, + device->bus, &device->target, &device->lun) != 0) + return -1; + goto lun_assigned; + } + + /* This is a non-zero lun of a multi-lun device. + * Search through our list and find the device which + * has the same 8 byte LUN address, excepting byte 4. + * Assign the same bus and target for this new LUN. + * Use the logical unit number from the firmware. + */ + memcpy(addr1, device->scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = h->dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + device->bus = sd->bus; + device->target = sd->target; + device->lun = device->scsi3addr[4]; + break; + } + } + if (device->lun == -1) { + dev_warn(&h->pdev->dev, "physical device with no LUN=0," + " suspect firmware bug or unsupported hardware " + "configuration.\n"); + return -1; + } + +lun_assigned: + + h->dev[n] = device; + h->ndevices++; + added[*nadded] = device; + (*nadded)++; + + /* initially, (before registering with scsi layer) we don't + * know our hostno and we don't want to print anything first + * time anyway (the scsi layer's inquiries will show that info) + */ + /* if (hostno != -1) */ + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", + scsi_device_type(device->devtype), hostno, + device->bus, device->target, device->lun); + return 0; +} + +/* Remove an entry from h->dev[] array. */ +static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, + struct hpsa_scsi_dev_t *removed[], int *nremoved) +{ + /* assumes h->devlock is held */ + int i; + struct hpsa_scsi_dev_t *sd; + + if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA) + BUG(); + + sd = h->dev[entry]; + removed[*nremoved] = h->dev[entry]; + (*nremoved)++; + + for (i = entry; i < h->ndevices-1; i++) + h->dev[i] = h->dev[i+1]; + h->ndevices--; + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", + scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, + sd->lun); +} + +#define SCSI3ADDR_EQ(a, b) ( \ + (a)[7] == (b)[7] && \ + (a)[6] == (b)[6] && \ + (a)[5] == (b)[5] && \ + (a)[4] == (b)[4] && \ + (a)[3] == (b)[3] && \ + (a)[2] == (b)[2] && \ + (a)[1] == (b)[1] && \ + (a)[0] == (b)[0]) + +static void fixup_botched_add(struct ctlr_info *h, + struct hpsa_scsi_dev_t *added) +{ + /* called when scsi_add_device fails in order to re-adjust + * h->dev[] to match the mid layer's view. + */ + unsigned long flags; + int i, j; + + spin_lock_irqsave(&h->lock, flags); + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i] == added) { + for (j = i; j < h->ndevices-1; j++) + h->dev[j] = h->dev[j+1]; + h->ndevices--; + break; + } + } + spin_unlock_irqrestore(&h->lock, flags); + kfree(added); +} + +static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, + struct hpsa_scsi_dev_t *dev2) +{ + if ((is_logical_dev_addr_mode(dev1->scsi3addr) || + (dev1->lun != -1 && dev2->lun != -1)) && + dev1->devtype != 0x0C) + return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); + + /* we compare everything except lun and target as these + * are not yet assigned. Compare parts likely + * to differ first + */ + if (memcmp(dev1->scsi3addr, dev2->scsi3addr, + sizeof(dev1->scsi3addr)) != 0) + return 0; + if (memcmp(dev1->device_id, dev2->device_id, + sizeof(dev1->device_id)) != 0) + return 0; + if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) + return 0; + if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) + return 0; + if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) + return 0; + if (dev1->devtype != dev2->devtype) + return 0; + if (dev1->raid_level != dev2->raid_level) + return 0; + if (dev1->bus != dev2->bus) + return 0; + return 1; +} + +/* Find needle in haystack. If exact match found, return DEVICE_SAME, + * and return needle location in *index. If scsi3addr matches, but not + * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle + * location in *index. If needle not found, return DEVICE_NOT_FOUND. + */ +static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, + struct hpsa_scsi_dev_t *haystack[], int haystack_size, + int *index) +{ + int i; +#define DEVICE_NOT_FOUND 0 +#define DEVICE_CHANGED 1 +#define DEVICE_SAME 2 + for (i = 0; i < haystack_size; i++) { + if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { + *index = i; + if (device_is_the_same(needle, haystack[i])) + return DEVICE_SAME; + else + return DEVICE_CHANGED; + } + } + *index = -1; + return DEVICE_NOT_FOUND; +} + +static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *sd[], int nsds) +{ + /* sd contains scsi3 addresses and devtypes, and inquiry + * data. This function takes what's in sd to be the current + * reality and updates h->dev[] to reflect that reality. + */ + int i, entry, device_change, changes = 0; + struct hpsa_scsi_dev_t *csd; + unsigned long flags; + struct hpsa_scsi_dev_t **added, **removed; + int nadded, nremoved; + struct Scsi_Host *sh = NULL; + + added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + + if (!added || !removed) { + dev_warn(&h->pdev->dev, "out of memory in " + "adjust_hpsa_scsi_table\n"); + goto free_and_out; + } + + spin_lock_irqsave(&h->devlock, flags); + + /* find any devices in h->dev[] that are not in + * sd[] and remove them from h->dev[], and for any + * devices which have changed, remove the old device + * info and add the new device info. + */ + i = 0; + nremoved = 0; + nadded = 0; + while (i < h->ndevices) { + csd = h->dev[i]; + device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + continue; /* remove ^^^, hence i not incremented */ + } else if (device_change == DEVICE_CHANGED) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + (void) hpsa_scsi_add_entry(h, hostno, sd[entry], + added, &nadded); + /* add can't fail, we just removed one. */ + sd[entry] = NULL; /* prevent it from being freed */ + } + i++; + } + + /* Now, make sure every device listed in sd[] is also + * listed in h->dev[], adding them if they aren't found + */ + + for (i = 0; i < nsds; i++) { + if (!sd[i]) /* if already added above. */ + continue; + device_change = hpsa_scsi_find_entry(sd[i], h->dev, + h->ndevices, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + if (hpsa_scsi_add_entry(h, hostno, sd[i], + added, &nadded) != 0) + break; + sd[i] = NULL; /* prevent from being freed later. */ + } else if (device_change == DEVICE_CHANGED) { + /* should never happen... */ + changes++; + dev_warn(&h->pdev->dev, + "device unexpectedly changed.\n"); + /* but if it does happen, we just ignore that device */ + } + } + spin_unlock_irqrestore(&h->devlock, flags); + + /* Don't notify scsi mid layer of any changes the first time through + * (or if there are no changes) scsi_scan_host will do it later the + * first time through. + */ + if (hostno == -1 || !changes) + goto free_and_out; + + sh = h->scsi_host; + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i]->bus, + removed[i]->target, removed[i]->lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. + * future cmds to this device will get selection + * timeout as if the device was gone. + */ + dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " + " for removal.", hostno, removed[i]->bus, + removed[i]->target, removed[i]->lun); + } + kfree(removed[i]); + removed[i] = NULL; + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + if (scsi_add_device(sh, added[i]->bus, + added[i]->target, added[i]->lun) == 0) + continue; + dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " + "device not added.\n", hostno, added[i]->bus, + added[i]->target, added[i]->lun); + /* now we have to remove it from h->dev, + * since it didn't get added to scsi mid layer + */ + fixup_botched_add(h, added[i]); + } + +free_and_out: + kfree(added); + kfree(removed); + return 0; +} + +/* + * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Assume's h->devlock is held. + */ +static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, + int bus, int target, int lun) +{ + int i; + struct hpsa_scsi_dev_t *sd; + + for (i = 0; i < h->ndevices; i++) { + sd = h->dev[i]; + if (sd->bus == bus && sd->target == target && sd->lun == lun) + return sd; + } + return NULL; +} + +/* link sdev->hostdata to our per-device structure. */ +static int hpsa_slave_alloc(struct scsi_device *sdev) +{ + struct hpsa_scsi_dev_t *sd; + unsigned long flags; + struct ctlr_info *h; + + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->devlock, flags); + sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), + sdev_id(sdev), sdev->lun); + if (sd != NULL) + sdev->hostdata = sd; + spin_unlock_irqrestore(&h->devlock, flags); + return 0; +} + +static void hpsa_slave_destroy(struct scsi_device *sdev) +{ + return; /* nothing to do. */ +} + +static void hpsa_scsi_setup(struct ctlr_info *h) +{ + h->ndevices = 0; + h->scsi_host = NULL; + spin_lock_init(&h->devlock); + return; +} + +static void complete_scsi_command(struct CommandList *cp, + int timeout, __u32 tag) +{ + struct scsi_cmnd *cmd; + struct ctlr_info *h; + struct ErrorInfo *ei; + + unsigned char sense_key; + unsigned char asc; /* additional sense code */ + unsigned char ascq; /* additional sense code qualifier */ + + ei = cp->err_info; + cmd = (struct scsi_cmnd *) cp->scsi_cmd; + h = cp->h; + + scsi_dma_unmap(cmd); /* undo the DMA mappings */ + + cmd->result = (DID_OK << 16); /* host byte */ + cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + cmd->result |= (ei->ScsiStatus << 1); + + /* copy the sense data whether we need to or not. */ + memcpy(cmd->sense_buffer, ei->SenseInfo, + ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? + SCSI_SENSE_BUFFERSIZE : + ei->SenseLen); + scsi_set_resid(cmd, ei->ResidualCnt); + + if (ei->CommandStatus == 0) { + cmd->scsi_done(cmd); + cmd_free(h, cp); + return; + } + + /* an error has occurred */ + switch (ei->CommandStatus) { + + case CMD_TARGET_STATUS: + if (ei->ScsiStatus) { + /* Get sense key */ + sense_key = 0xf & ei->SenseInfo[2]; + /* Get additional sense code */ + asc = ei->SenseInfo[12]; + /* Get addition sense code qualifier */ + ascq = ei->SenseInfo[13]; + } + + if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { + if (check_for_unit_attention(h, cp)) { + cmd->result = DID_SOFT_ERROR << 16; + break; + } + if (sense_key == ILLEGAL_REQUEST) { + /* + * SCSI REPORT_LUNS is commonly unsupported on + * Smart Array. Suppress noisy complaint. + */ + if (cp->Request.CDB[0] == REPORT_LUNS) + break; + + /* If ASC/ASCQ indicate Logical Unit + * Not Supported condition, + */ + if ((asc == 0x25) && (ascq == 0x0)) { + dev_warn(&h->pdev->dev, "cp %p " + "has check condition\n", cp); + break; + } + } + + if (sense_key == NOT_READY) { + /* If Sense is Not Ready, Logical Unit + * Not ready, Manual Intervention + * required + */ + if ((asc == 0x04) && (ascq == 0x03)) { + cmd->result = DID_NO_CONNECT << 16; + dev_warn(&h->pdev->dev, "cp %p " + "has check condition: unit " + "not ready, manual " + "intervention required\n", cp); + break; + } + } + + + /* Must be some other type of check condition */ + dev_warn(&h->pdev->dev, "cp %p has check condition: " + "unknown type: " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x, " + "cmd=[%02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x]\n", + cp, sense_key, asc, ascq, + cmd->result, + cmd->cmnd[0], cmd->cmnd[1], + cmd->cmnd[2], cmd->cmnd[3], + cmd->cmnd[4], cmd->cmnd[5], + cmd->cmnd[6], cmd->cmnd[7], + cmd->cmnd[8], cmd->cmnd[9]); + break; + } + + + /* Problem was not a check condition + * Pass it up to the upper layers... + */ + if (ei->ScsiStatus) { + dev_warn(&h->pdev->dev, "cp %p has status 0x%x " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x\n", + cp, ei->ScsiStatus, + sense_key, asc, ascq, + cmd->result); + } else { /* scsi status is zero??? How??? */ + dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " + "Returning no connection.\n", cp), + + /* Ordinarily, this case should never happen, + * but there is a bug in some released firmware + * revisions that allows it to happen if, for + * example, a 4100 backplane loses power and + * the tape drive is in it. We assume that + * it's a fatal error of some kind because we + * can't show that it wasn't. We will make it + * look like selection timeout since that is + * the most common reason for this to occur, + * and it's severe enough. + */ + + cmd->result = DID_NO_CONNECT << 16; + } + break; + + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + break; + case CMD_DATA_OVERRUN: + dev_warn(&h->pdev->dev, "cp %p has" + " completed with data overrun " + "reported\n", cp); + break; + case CMD_INVALID: { + /* print_bytes(cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + /* We get CMD_INVALID if you address a non-existent device + * instead of a selection timeout (no response). You will + * see this if you yank out a drive, then try to access it. + * This is kind of a shame because it means that any other + * CMD_INVALID (e.g. driver bug) will get interpreted as a + * missing target. */ + cmd->result = DID_NO_CONNECT << 16; + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cp %p has " + "protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", + cp, ei->ScsiStatus); + break; + case CMD_ABORT_FAILED: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " + "abort\n", cp); + break; + case CMD_TIMEOUT: + cmd->result = DID_TIME_OUT << 16; + dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); + break; + default: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", + cp, ei->CommandStatus); + } + cmd->scsi_done(cmd); + cmd_free(h, cp); +} + +static int hpsa_scsi_detect(struct ctlr_info *h) +{ + struct Scsi_Host *sh; + int error; + + sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); + if (sh == NULL) + goto fail; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->this_id = -1; + sh->max_channel = 3; + sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_lun = HPSA_MAX_LUN; + sh->max_id = HPSA_MAX_LUN; + h->scsi_host = sh; + sh->hostdata[0] = (unsigned long) h; + sh->irq = h->intr[SIMPLE_MODE_INT]; + sh->unique_id = sh->irq; + error = scsi_add_host(sh, &h->pdev->dev); + if (error) + goto fail_host_put; + scsi_scan_host(sh); + return 0; + + fail_host_put: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" + " failed for controller %d\n", h->ctlr); + scsi_host_put(sh); + return -1; + fail: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" + " failed for controller %d\n", h->ctlr); + return -1; +} + +static void hpsa_pci_unmap(struct pci_dev *pdev, + struct CommandList *c, int sg_used, int data_direction) +{ + int i; + union u64bit addr64; + + for (i = 0; i < sg_used; i++) { + addr64.val32.lower = c->SG[i].Addr.lower; + addr64.val32.upper = c->SG[i].Addr.upper; + pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, + data_direction); + } +} + +static void hpsa_map_one(struct pci_dev *pdev, + struct CommandList *cp, + unsigned char *buf, + size_t buflen, + int data_direction) +{ + __u64 addr64; + + if (buflen == 0 || data_direction == PCI_DMA_NONE) { + cp->Header.SGList = 0; + cp->Header.SGTotal = 0; + return; + } + + addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction); + cp->SG[0].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Len = buflen; + cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */ +} + +static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, + struct CommandList *c) +{ + DECLARE_COMPLETION_ONSTACK(wait); + + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); +} + +static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, + struct CommandList *c, int data_direction) +{ + int retry_count = 0; + + do { + memset(c->err_info, 0, sizeof(c->err_info)); + hpsa_scsi_do_simple_cmd_core(h, c); + retry_count++; + } while (check_for_unit_attention(h, c) && retry_count <= 3); + hpsa_pci_unmap(h->pdev, c, 1, data_direction); +} + +static void hpsa_scsi_interpret_error(struct CommandList *cp) +{ + struct ErrorInfo *ei; + struct device *d = &cp->h->pdev->dev; + + ei = cp->err_info; + switch (ei->CommandStatus) { + case CMD_TARGET_STATUS: + dev_warn(d, "cmd %p has completed with errors\n", cp); + dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, + ei->ScsiStatus); + if (ei->ScsiStatus == 0) + dev_warn(d, "SCSI status is abnormally zero. " + "(probably indicates selection timeout " + "reported incorrectly due to a known " + "firmware bug, circa July, 2001.)\n"); + break; + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + dev_info(d, "UNDERRUN\n"); + break; + case CMD_DATA_OVERRUN: + dev_warn(d, "cp %p has completed with data overrun\n", cp); + break; + case CMD_INVALID: { + /* controller unfortunately reports SCSI passthru's + * to non-existent targets as invalid commands. + */ + dev_warn(d, "cp %p is reported invalid (probably means " + "target device no longer present)\n", cp); + /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(d, "cp %p has protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + /* cmd->result = DID_ERROR << 16; */ + dev_warn(d, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + dev_warn(d, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + dev_warn(d, "cp %p was aborted\n", cp); + break; + case CMD_ABORT_FAILED: + dev_warn(d, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); + break; + case CMD_TIMEOUT: + dev_warn(d, "cp %p timed out\n", cp); + break; + default: + dev_warn(d, "cp %p returned unknown status %x\n", cp, + ei->CommandStatus); + } +} + +static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char page, unsigned char *buf, + unsigned char bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + ei = c->err_info; + if (ei->CommandStatus != 0) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static void hpsa_get_raid_level(struct ctlr_info *h, + unsigned char *scsi3addr, unsigned char *raid_level) +{ + int rc; + unsigned char *buf; + + *raid_level = RAID_UNKNOWN; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); + if (rc == 0) + *raid_level = buf[8]; + if (*raid_level > RAID_UNKNOWN) + *raid_level = RAID_UNKNOWN; + kfree(buf); + return; +} + +/* Get the device id from inquiry page 0x83 */ +static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char *device_id, int buflen) +{ + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return -1; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); + if (rc == 0) + memcpy(device_id, &buf[8], buflen); + kfree(buf); + return rc != 0; +} + +static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, + struct ReportLUNdata *buf, int bufsize, + int extended_response) +{ + int rc = IO_OK; + struct CommandList *c; + unsigned char scsi3addr[8]; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + memset(&scsi3addr[0], 0, 8); /* address the controller */ + + fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, + buf, bufsize, 0, scsi3addr, TYPE_CMD); + if (extended_response) + c->Request.CDB[1] = extended_response; + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && + ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, + int bufsize, int extended_response) +{ + return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); +} + +static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, int bufsize) +{ + return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); +} + +static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, + int bus, int target, int lun) +{ + device->bus = bus; + device->target = target; + device->lun = lun; +} + +static int hpsa_update_device_info(struct ctlr_info *h, + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) +{ +#define OBDR_TAPE_INQ_SIZE 49 + unsigned char *inq_buff = NULL; + + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + if (!inq_buff) + goto bail_out; + + memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); + /* Do an inquiry to the device to see what it is. */ + if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, + (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { + /* Inquiry failed (msg printed already) */ + dev_err(&h->pdev->dev, + "hpsa_update_device_info: inquiry failed\n"); + goto bail_out; + } + + /* As a side effect, record the firmware version number + * if we happen to be talking to the RAID controller. + */ + if (is_hba_lunid(scsi3addr)) + memcpy(h->firm_ver, &inq_buff[32], 4); + + this_device->devtype = (inq_buff[0] & 0x1f); + memcpy(this_device->scsi3addr, scsi3addr, 8); + memcpy(this_device->vendor, &inq_buff[8], + sizeof(this_device->vendor)); + memcpy(this_device->model, &inq_buff[16], + sizeof(this_device->model)); + memcpy(this_device->revision, &inq_buff[32], + sizeof(this_device->revision)); + memset(this_device->device_id, 0, + sizeof(this_device->device_id)); + hpsa_get_device_id(h, scsi3addr, this_device->device_id, + sizeof(this_device->device_id)); + + if (this_device->devtype == TYPE_DISK && + is_logical_dev_addr_mode(scsi3addr)) + hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); + else + this_device->raid_level = RAID_UNKNOWN; + + kfree(inq_buff); + return 0; + +bail_out: + kfree(inq_buff); + return 1; +} + +static unsigned char *msa2xxx_model[] = { + "MSA2012", + "MSA2024", + "MSA2312", + "MSA2324", + NULL, +}; + +static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +{ + int i; + + for (i = 0; msa2xxx_model[i]; i++) + if (strncmp(device->model, msa2xxx_model[i], + strlen(msa2xxx_model[i])) == 0) + return 1; + return 0; +} + +/* Helper function to assign bus, target, lun mapping of devices. + * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical + * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. + * Logical drive target and lun are assigned at this time, but + * physical device lun and target assignment are deferred (assigned + * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) + */ +static void figure_bus_target_lun(struct ctlr_info *h, + __u8 *lunaddrbytes, int *bus, int *target, int *lun, + struct hpsa_scsi_dev_t *device) +{ + + __u32 lunid; + + if (is_logical_dev_addr_mode(lunaddrbytes)) { + /* logical device */ + memcpy(&lunid, lunaddrbytes, sizeof(lunid)); + lunid = le32_to_cpu(lunid); + + if (is_msa2xxx(h, device)) { + *bus = 1; + *target = (lunid >> 16) & 0x3fff; + *lun = lunid & 0x00ff; + } else { + *bus = 0; + *lun = 0; + *target = lunid & 0x3fff; + } + } else { + /* physical device */ + if (is_hba_lunid(lunaddrbytes)) + *bus = 3; + else + *bus = 2; + *target = -1; + *lun = -1; /* we will fill these in later. */ + } +} + +/* + * If there is no lun 0 on a target, linux won't find any devices. + * For the MSA2xxx boxes, we have to manually detect the enclosure + * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report + * it for some reason. *tmpdevice is the target we're adding, + * this_device is a pointer into the current element of currentsd[] + * that we're building up in update_scsi_devices(), below. + * lunzerobits is a bitmap that tracks which targets already have a + * lun 0 assigned. + * Returns 1 if an enclosure was added, 0 if not. + */ +static int add_msa2xxx_enclosure_device(struct ctlr_info *h, + struct hpsa_scsi_dev_t *tmpdevice, + struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes, + int bus, int target, int lun, unsigned long lunzerobits[], + int *nmsa2xxx_enclosures) +{ + unsigned char scsi3addr[8]; + + if (test_bit(target, lunzerobits)) + return 0; /* There is already a lun 0 on this target. */ + + if (!is_logical_dev_addr_mode(lunaddrbytes)) + return 0; /* It's the logical targets that may lack lun 0. */ + + if (!is_msa2xxx(h, tmpdevice)) + return 0; /* It's only the MSA2xxx that have this problem. */ + + if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ + return 0; + + if (is_hba_lunid(scsi3addr)) + return 0; /* Don't add the RAID controller here. */ + +#define MAX_MSA2XXX_ENCLOSURES 32 + if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { + dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " + "enclosures exceeded. Check your hardware " + "configuration."); + return 0; + } + + memset(scsi3addr, 0, 8); + scsi3addr[3] = target; + if (hpsa_update_device_info(h, scsi3addr, this_device)) + return 0; + (*nmsa2xxx_enclosures)++; + hpsa_set_bus_target_lun(this_device, bus, target, 0); + set_bit(target, lunzerobits); + return 1; +} + +/* + * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, + * logdev. The number of luns in physdev and logdev are returned in + * *nphysicals and *nlogicals, respectively. + * Returns 0 on success, -1 otherwise. + */ +static int hpsa_gather_lun_info(struct ctlr_info *h, + int reportlunsize, + struct ReportLUNdata *physdev, __u32 *nphysicals, + struct ReportLUNdata *logdev, __u32 *nlogicals) +{ + if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { + dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); + return -1; + } + memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals)); + *nphysicals = be32_to_cpu(*nphysicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals); +#endif + if (*nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." + " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals - HPSA_MAX_PHYS_LUN); + *nphysicals = HPSA_MAX_PHYS_LUN; + } + if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { + dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); + return -1; + } + memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals)); + *nlogicals = be32_to_cpu(*nlogicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals); +#endif + /* Reject Logicals in excess of our max capability. */ + if (*nlogicals > HPSA_MAX_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_LUN, + *nlogicals - HPSA_MAX_LUN); + *nlogicals = HPSA_MAX_LUN; + } + if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical + physical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); + *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; + } + return 0; +} + +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) +{ + /* the idea here is we could get notified + * that some devices have changed, so we do a report + * physical luns and report logical luns cmd, and adjust + * our list of devices accordingly. + * + * The scsi3addr's of devices won't change so long as the + * adapter is not reset. That means we can rescan and + * tell which devices we already know about, vs. new + * devices, vs. disappearing devices. + */ + struct ReportLUNdata *physdev_list = NULL; + struct ReportLUNdata *logdev_list = NULL; + unsigned char *inq_buff = NULL; + __u32 nphysicals = 0; + __u32 nlogicals = 0; + __u32 ndev_allocated = 0; + struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; + int ncurrent = 0; + int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; + int i, nmsa2xxx_enclosures, ndevs_to_allocate; + int bus, target, lun; + DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); + + currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + physdev_list = kzalloc(reportlunsize, GFP_KERNEL); + logdev_list = kzalloc(reportlunsize, GFP_KERNEL); + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); + + if (!currentsd || !physdev_list || !logdev_list || + !inq_buff || !tmpdevice) { + dev_err(&h->pdev->dev, "out of memory\n"); + goto out; + } + memset(lunzerobits, 0, sizeof(lunzerobits)); + + if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, + logdev_list, &nlogicals)) + goto out; + + /* We might see up to 32 MSA2xxx enclosures, actually 8 of them + * but each of them 4 times through different paths. The plus 1 + * is for the RAID controller. + */ + ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; + + /* Allocate the per device structures */ + for (i = 0; i < ndevs_to_allocate; i++) { + currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); + if (!currentsd[i]) { + dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", + __FILE__, __LINE__); + goto out; + } + ndev_allocated++; + } + + /* adjust our table of devices */ + nmsa2xxx_enclosures = 0; + for (i = 0; i < nphysicals + nlogicals + 1; i++) { + __u8 *lunaddrbytes; + + /* Figure out where the LUN ID info is coming from */ + if (i < nphysicals) + lunaddrbytes = &physdev_list->LUN[i][0]; + else + if (i < nphysicals + nlogicals) + lunaddrbytes = + &logdev_list->LUN[i-nphysicals][0]; + else /* jam in the RAID controller at the end */ + lunaddrbytes = RAID_CTLR_LUNID; + + /* skip masked physical devices. */ + if (lunaddrbytes[3] & 0xC0 && i < nphysicals) + continue; + + /* Get device type, vendor, model, device id */ + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + continue; /* skip it if we can't talk to it. */ + figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, + tmpdevice); + this_device = currentsd[ncurrent]; + + /* + * For the msa2xxx boxes, we have to insert a LUN 0 which + * doesn't show up in CCISS_REPORT_PHYSICAL data, but there + * is nonetheless an enclosure device there. We have to + * present that otherwise linux won't find anything if + * there is no lun 0. + */ + if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, + lunaddrbytes, bus, target, lun, lunzerobits, + &nmsa2xxx_enclosures)) { + ncurrent++; + this_device = currentsd[ncurrent]; + } + + *this_device = *tmpdevice; + hpsa_set_bus_target_lun(this_device, bus, target, lun); + + switch (this_device->devtype) { + case TYPE_ROM: { + /* We don't *really* support actual CD-ROM devices, + * just "One Button Disaster Recovery" tape drive + * which temporarily pretends to be a CD-ROM drive. + * So we check that the device is really an OBDR tape + * device by checking for "$DR-10" in bytes 43-48 of + * the inquiry data. + */ + char obdr_sig[7]; +#define OBDR_TAPE_SIG "$DR-10" + strncpy(obdr_sig, &inq_buff[43], 6); + obdr_sig[6] = '\0'; + if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) + /* Not OBDR device, ignore it. */ + break; + } + ncurrent++; + break; + case TYPE_DISK: + if (i < nphysicals) + break; + ncurrent++; + break; + case TYPE_TAPE: + case TYPE_MEDIUM_CHANGER: + ncurrent++; + break; + case TYPE_RAID: + /* Only present the Smartarray HBA as a RAID controller. + * If it's a RAID controller other than the HBA itself + * (an external RAID controller, MSA500 or similar) + * don't present it. + */ + if (!is_hba_lunid(lunaddrbytes)) + break; + ncurrent++; + break; + default: + break; + } + if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) + break; + } + adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); +out: + kfree(tmpdevice); + for (i = 0; i < ndev_allocated; i++) + kfree(currentsd[i]); + kfree(currentsd); + kfree(inq_buff); + kfree(physdev_list); + kfree(logdev_list); + return; +} + +/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci + * dma mapping and fills in the scatter gather entries of the + * hpsa command, cp. + */ +static int hpsa_scatter_gather(struct pci_dev *pdev, + struct CommandList *cp, + struct scsi_cmnd *cmd) +{ + unsigned int len; + struct scatterlist *sg; + __u64 addr64; + int use_sg, i; + + BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); + + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) + return use_sg; + + if (!use_sg) + goto sglist_finished; + + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (__u64) sg_dma_address(sg); + len = sg_dma_len(sg); + cp->SG[i].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Len = len; + cp->SG[i].Ext = 0; /* we are not chaining */ + } + +sglist_finished: + + cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */ + return 0; +} + + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + unsigned char scsi3addr[8]; + struct CommandList *c; + unsigned long flags; + + /* Get the ptr to our adapter structure out of cmd->host. */ + h = sdev_to_hba(cmd->device); + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } + memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); + + /* Need a lock as this is being allocated from the pool */ + spin_lock_irqsave(&h->lock, flags); + c = cmd_alloc(h); + spin_unlock_irqrestore(&h->lock, flags); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* Fill in the command list header */ + + cmd->scsi_done = done; /* save this for use by completion code */ + + /* save c in case we have to abort it */ + cmd->host_scribble = (unsigned char *) c; + + c->cmd_type = CMD_SCSI; + c->scsi_cmd = cmd; + c->Header.ReplyQueue = 0; /* unused in simple mode */ + memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); + c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ + + /* Fill in the request block... */ + + c->Request.Timeout = 0; + memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); + BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); + c->Request.CDBLen = cmd->cmd_len; + memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); + c->Request.Type.Type = TYPE_CMD; + c->Request.Type.Attribute = ATTR_SIMPLE; + switch (cmd->sc_data_direction) { + case DMA_TO_DEVICE: + c->Request.Type.Direction = XFER_WRITE; + break; + case DMA_FROM_DEVICE: + c->Request.Type.Direction = XFER_READ; + break; + case DMA_NONE: + c->Request.Type.Direction = XFER_NONE; + break; + case DMA_BIDIRECTIONAL: + /* This can happen if a buggy application does a scsi passthru + * and sets both inlen and outlen to non-zero. ( see + * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) + */ + + c->Request.Type.Direction = XFER_RSVD; + /* This is technically wrong, and hpsa controllers should + * reject it with CMD_INVALID, which is the most correct + * response, but non-fibre backends appear to let it + * slide by, and give the same results as if this field + * were set correctly. Either way is acceptable for + * our purposes here. + */ + + break; + + default: + dev_err(&h->pdev->dev, "unknown data direction: %d\n", + cmd->sc_data_direction); + BUG(); + break; + } + + if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + enqueue_cmd_and_start_io(h, c); + /* the cmd'll come back via intr handler in complete_scsi_command() */ + return 0; +} + +static void hpsa_unregister_scsi(struct ctlr_info *h) +{ + /* we are being forcibly unloaded, and may not refuse. */ + scsi_remove_host(h->scsi_host); + scsi_host_put(h->scsi_host); + h->scsi_host = NULL; +} + +static int hpsa_register_scsi(struct ctlr_info *h) +{ + int rc; + + hpsa_update_scsi_devices(h, -1); + rc = hpsa_scsi_detect(h); + if (rc != 0) + dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" + " hpsa_scsi_detect(), rc is %d\n", rc); + return rc; +} + +static int wait_for_device_to_become_ready(struct ctlr_info *h, + unsigned char lunaddr[]) +{ + int rc = 0; + int count = 0; + int waittime = 1; /* seconds */ + struct CommandList *c; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "out of memory in " + "wait_for_device_to_become_ready.\n"); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < HPSA_TUR_RETRY_LIMIT) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + msleep(1000 * waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + if (c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + dev_warn(&h->pdev->dev, "waiting %d secs " + "for device to become ready.\n", waittime); + rc = 1; /* device not ready. */ + } + + if (rc) + dev_warn(&h->pdev->dev, "giving up on device.\n"); + else + dev_warn(&h->pdev->dev, "device is ready.\n"); + + cmd_special_free(h, c); + return rc; +} + +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. + */ +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + + /* find the controller to which the command to be aborted was sent */ + h = sdev_to_hba(scsicmd->device); + if (h == NULL) /* paranoia */ + return FAILED; + dev_warn(&h->pdev->dev, "resetting drive\n"); + + dev = scsicmd->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " + "device lookup failed.\n"); + return FAILED; + } + /* send a reset to the SCSI LUN which the command was sent to */ + rc = hpsa_send_reset(h, dev->scsi3addr); + if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) + return SUCCESS; + + dev_warn(&h->pdev->dev, "resetting device failed.\n"); + return FAILED; +} + +/* + * For operations that cannot sleep, a command block is allocated at init, + * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track + * which ones are free or in use. Lock must be held when calling this. + * cmd_free() is the complement. + */ +static struct CommandList *cmd_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + int i; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + do { + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) + return NULL; + } while (test_and_set_bit + (i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); + c = h->cmd_pool + i; + memset(c, 0, sizeof(*c)); + cmd_dma_handle = h->cmd_pool_dhandle + + i * sizeof(*c); + c->err_info = h->errinfo_pool + i; + memset(c->err_info, 0, sizeof(*c->err_info)); + err_dma_handle = h->errinfo_pool_dhandle + + i * sizeof(*c->err_info); + h->nr_allocs++; + + c->cmdindex = i; + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +/* For operations that can wait for kmalloc to possibly sleep, + * this routine can be called. Lock need not be held to call + * cmd_special_alloc. cmd_special_free() is the complement. + */ +static struct CommandList *cmd_special_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); + if (c == NULL) + return NULL; + memset(c, 0, sizeof(*c)); + + c->cmdindex = -1; + + c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), + &err_dma_handle); + + if (c->err_info == NULL) { + pci_free_consistent(h->pdev, + sizeof(*c), c, cmd_dma_handle); + return NULL; + } + memset(c->err_info, 0, sizeof(*c->err_info)); + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +static void cmd_free(struct ctlr_info *h, struct CommandList *c) +{ + int i; + + i = c - h->cmd_pool; + clear_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + h->nr_frees++; +} + +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) +{ + union u64bit temp64; + + temp64.val32.lower = c->ErrDesc.Addr.lower; + temp64.val32.upper = c->ErrDesc.Addr.upper; + pci_free_consistent(h->pdev, sizeof(*c->err_info), + c->err_info, (dma_addr_t) temp64.val); + pci_free_consistent(h->pdev, sizeof(*c), + c, (dma_addr_t) c->busaddr); +} + +#ifdef CONFIG_COMPAT + +static int do_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + int ret; + + lock_kernel(); + ret = hpsa_ioctl(dev, cmd, arg); + unlock_kernel(); + return ret; +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg); +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg); + +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + switch (cmd) { + case CCISS_GETPCIINFO: + case CCISS_GETINTINFO: + case CCISS_SETINTINFO: + case CCISS_GETNODENAME: + case CCISS_SETNODENAME: + case CCISS_GETHEARTBEAT: + case CCISS_GETBUSTYPES: + case CCISS_GETFIRMVER: + case CCISS_GETDRIVVER: + case CCISS_REVALIDVOLS: + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + case CCISS_RESCANDISK: + case CCISS_GETLUNINFO: + return do_ioctl(dev, cmd, arg); + + case CCISS_PASSTHRU32: + return hpsa_ioctl32_passthru(dev, cmd, arg); + case CCISS_BIG_PASSTHRU32: + return hpsa_ioctl32_big_passthru(dev, cmd, arg); + + default: + return -ENOIOCTLCMD; + } +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) +{ + IOCTL32_Command_struct __user *arg32 = + (IOCTL32_Command_struct __user *) arg; + IOCTL_Command_struct arg64; + IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} + +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg) +{ + BIG_IOCTL32_Command_struct __user *arg32 = + (BIG_IOCTL32_Command_struct __user *) arg; + BIG_IOCTL_Command_struct arg64; + BIG_IOCTL_Command_struct __user *p = + compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(arg64.malloc_size, &arg32->malloc_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} +#endif + +static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) +{ + struct hpsa_pci_info pciinfo; + + if (!argp) + return -EINVAL; + pciinfo.domain = pci_domain_nr(h->pdev->bus); + pciinfo.bus = h->pdev->bus->number; + pciinfo.dev_fn = h->pdev->devfn; + pciinfo.board_id = h->board_id; + if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) + return -EFAULT; + return 0; +} + +static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) +{ + DriverVer_type DriverVer; + unsigned char vmaj, vmin, vsubmin; + int rc; + + rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", + &vmaj, &vmin, &vsubmin); + if (rc != 3) { + dev_info(&h->pdev->dev, "driver version string '%s' " + "unrecognized.", HPSA_DRIVER_VERSION); + vmaj = 0; + vmin = 0; + vsubmin = 0; + } + DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; + if (!argp) + return -EINVAL; + if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) + return -EFAULT; + return 0; +} + +static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + IOCTL_Command_struct iocommand; + struct CommandList *c; + char *buff = NULL; + union u64bit temp64; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (copy_from_user(&iocommand, argp, sizeof(iocommand))) + return -EFAULT; + if ((iocommand.buf_size < 1) && + (iocommand.Request.Type.Direction != XFER_NONE)) { + return -EINVAL; + } + if (iocommand.buf_size > 0) { + buff = kmalloc(iocommand.buf_size, GFP_KERNEL); + if (buff == NULL) + return -EFAULT; + } + if (iocommand.Request.Type.Direction == XFER_WRITE) { + /* Copy the data into the buffer we created */ + if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { + kfree(buff); + return -EFAULT; + } + } else + memset(buff, 0, iocommand.buf_size); + c = cmd_special_alloc(h); + if (c == NULL) { + kfree(buff); + return -ENOMEM; + } + /* Fill in the command type */ + c->cmd_type = CMD_IOCTL_PEND; + /* Fill in Command Header */ + c->Header.ReplyQueue = 0; /* unused in simple mode */ + if (iocommand.buf_size > 0) { /* buffer to fill */ + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { /* no buffers to fill */ + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); + /* use the kernel address the cmd block for tag */ + c->Header.Tag.lower = c->busaddr; + + /* Fill in Request block */ + memcpy(&c->Request, &iocommand.Request, + sizeof(c->Request)); + + /* Fill in the scatter gather information */ + if (iocommand.buf_size > 0) { + temp64.val = pci_map_single(h->pdev, buff, + iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + c->SG[0].Addr.lower = temp64.val32.lower; + c->SG[0].Addr.upper = temp64.val32.upper; + c->SG[0].Len = iocommand.buf_size; + c->SG[0].Ext = 0; /* we are not chaining*/ + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + + /* Copy the error information out */ + memcpy(&iocommand.error_info, c->err_info, + sizeof(iocommand.error_info)); + if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + + if (iocommand.Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + } + kfree(buff); + cmd_special_free(h, c); + return 0; +} + +static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + BIG_IOCTL_Command_struct *ioc; + struct CommandList *c; + unsigned char **buff = NULL; + int *buff_size = NULL; + union u64bit temp64; + BYTE sg_used = 0; + int status = 0; + int i; + __u32 left; + __u32 sz; + BYTE __user *data_ptr; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + ioc = (BIG_IOCTL_Command_struct *) + kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) { + status = -ENOMEM; + goto cleanup1; + } + if (copy_from_user(ioc, argp, sizeof(*ioc))) { + status = -EFAULT; + goto cleanup1; + } + if ((ioc->buf_size < 1) && + (ioc->Request.Type.Direction != XFER_NONE)) { + status = -EINVAL; + goto cleanup1; + } + /* Check kmalloc limits using all SGs */ + if (ioc->malloc_size > MAX_KMALLOC_SIZE) { + status = -EINVAL; + goto cleanup1; + } + if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + status = -EINVAL; + goto cleanup1; + } + buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + if (!buff) { + status = -ENOMEM; + goto cleanup1; + } + buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + if (!buff_size) { + status = -ENOMEM; + goto cleanup1; + } + left = ioc->buf_size; + data_ptr = ioc->buf; + while (left) { + sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; + buff_size[sg_used] = sz; + buff[sg_used] = kmalloc(sz, GFP_KERNEL); + if (buff[sg_used] == NULL) { + status = -ENOMEM; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { + status = -ENOMEM; + goto cleanup1; + } + } else + memset(buff[sg_used], 0, sz); + left -= sz; + data_ptr += sz; + sg_used++; + } + c = cmd_special_alloc(h); + if (c == NULL) { + status = -ENOMEM; + goto cleanup1; + } + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + + if (ioc->buf_size > 0) { + c->Header.SGList = sg_used; + c->Header.SGTotal = sg_used; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); + c->Header.Tag.lower = c->busaddr; + memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); + if (ioc->buf_size > 0) { + int i; + for (i = 0; i < sg_used; i++) { + temp64.val = pci_map_single(h->pdev, buff[i], + buff_size[i], PCI_DMA_BIDIRECTIONAL); + c->SG[i].Addr.lower = temp64.val32.lower; + c->SG[i].Addr.upper = temp64.val32.upper; + c->SG[i].Len = buff_size[i]; + /* we are not chaining */ + c->SG[i].Ext = 0; + } + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + /* Copy the error information out */ + memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); + if (copy_to_user(argp, ioc, sizeof(*ioc))) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + BYTE __user *ptr = ioc->buf; + for (i = 0; i < sg_used; i++) { + if (copy_to_user(ptr, buff[i], buff_size[i])) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + ptr += buff_size[i]; + } + } + cmd_special_free(h, c); + status = 0; +cleanup1: + if (buff) { + for (i = 0; i < sg_used; i++) + kfree(buff[i]); + kfree(buff); + } + kfree(buff_size); + kfree(ioc); + return status; +} + +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) + (void) check_for_unit_attention(h, c); +} +/* + * ioctl + */ +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + struct ctlr_info *h; + void __user *argp = (void __user *)arg; + + h = sdev_to_hba(dev); + + switch (cmd) { + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + hpsa_update_scsi_devices(h, dev->host->host_no); + return 0; + case CCISS_GETPCIINFO: + return hpsa_getpciinfo_ioctl(h, argp); + case CCISS_GETDRIVVER: + return hpsa_getdrivver_ioctl(h, argp); + case CCISS_PASSTHRU: + return hpsa_passthru_ioctl(h, argp); + case CCISS_BIG_PASSTHRU: + return hpsa_big_passthru_ioctl(h, argp); + default: + return -ENOTTY; + } +} + +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) +{ + int pci_dir = XFER_NONE; + + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + if (buff != NULL && size > 0) { + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + + c->Request.Type.Type = cmd_type; + if (cmd_type == TYPE_CMD) { + switch (cmd) { + case HPSA_INQUIRY: + /* are we trying to read a vital product page */ + if (page_code != 0) { + c->Request.CDB[1] = 0x01; + c->Request.CDB[2] = page_code; + } + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = HPSA_INQUIRY; + c->Request.CDB[4] = size & 0xFF; + break; + case HPSA_REPORT_LOG: + case HPSA_REPORT_PHYS: + /* Talking to controller so It's a physical command + mode = 00 target = 0. Nothing to write. + */ + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0xFF; + c->Request.CDB[9] = size & 0xFF; + break; + + case HPSA_READ_CAPACITY: + c->Request.CDBLen = 10; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + break; + case HPSA_CACHE_FLUSH: + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_WRITE; + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_WRITE; + c->Request.CDB[6] = BMIC_CACHE_FLUSH; + break; + case TEST_UNIT_READY: + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; + default: + dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); + BUG(); + return; + } + } else if (cmd_type == TYPE_MSG) { + switch (cmd) { + + case HPSA_DEVICE_RESET_MSG: + c->Request.CDBLen = 16; + c->Request.Type.Type = 1; /* It is a MSG not a CMD */ + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; /* Don't time out */ + c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ + c->Request.CDB[1] = 0x03; /* Reset target above */ + /* If bytes 4-7 are zero, it means reset the */ + /* LunID device */ + c->Request.CDB[4] = 0x00; + c->Request.CDB[5] = 0x00; + c->Request.CDB[6] = 0x00; + c->Request.CDB[7] = 0x00; + break; + + default: + dev_warn(&h->pdev->dev, "unknown message type %d\n", + cmd); + BUG(); + } + } else { + dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); + BUG(); + } + + switch (c->Request.Type.Direction) { + case XFER_READ: + pci_dir = PCI_DMA_FROMDEVICE; + break; + case XFER_WRITE: + pci_dir = PCI_DMA_TODEVICE; + break; + case XFER_NONE: + pci_dir = PCI_DMA_NONE; + break; + default: + pci_dir = PCI_DMA_BIDIRECTIONAL; + } + + hpsa_map_one(h->pdev, c, buff, size, pci_dir); + + return; +} + +/* + * Map (physical) PCI mem into (virtual) kernel space + */ +static void __iomem *remap_pci_mem(ulong base, ulong size) +{ + ulong page_base = ((ulong) base) & PAGE_MASK; + ulong page_offs = ((ulong) base) - page_base; + void __iomem *page_remapped = ioremap(page_base, page_offs + size); + + return page_remapped ? (page_remapped + page_offs) : NULL; +} + +/* Takes cmds off the submission queue and sends them to the hardware, + * then puts them on the queue of cmds waiting for completion. + */ +static void start_io(struct ctlr_info *h) +{ + struct CommandList *c; + + while (!hlist_empty(&h->reqQ)) { + c = hlist_entry(h->reqQ.first, struct CommandList, list); + /* can't do anything if fifo is full */ + if ((h->access.fifo_full(h))) { + dev_warn(&h->pdev->dev, "fifo full\n"); + break; + } + + /* Get the first entry from the Request Q */ + removeQ(c); + h->Qdepth--; + + /* Tell the controller execute command */ + h->access.submit_command(h, c); + + /* Put job onto the completed Q */ + addQ(&h->cmpQ, c); + } +} + +static inline unsigned long get_next_completion(struct ctlr_info *h) +{ + return h->access.command_completed(h); +} + +static inline int interrupt_pending(struct ctlr_info *h) +{ + return h->access.intr_pending(h); +} + +static inline long interrupt_not_for_us(struct ctlr_info *h) +{ + return ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); +} + +static inline int bad_tag(struct ctlr_info *h, __u32 tag_index, + __u32 raw_tag) +{ + if (unlikely(tag_index >= h->nr_cmds)) { + dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); + return 1; + } + return 0; +} + +static inline void finish_cmd(struct CommandList *c, __u32 raw_tag) +{ + removeQ(c); + if (likely(c->cmd_type == CMD_SCSI)) + complete_scsi_command(c, 0, raw_tag); + else if (c->cmd_type == CMD_IOCTL_PEND) + complete(c->waiting); +} + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id) +{ + struct ctlr_info *h = dev_id; + struct CommandList *c; + unsigned long flags; + __u32 raw_tag, tag, tag_index; + struct hlist_node *tmp; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) { + if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) { + tag_index = HPSA_TAG_TO_INDEX(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return IRQ_HANDLED; + c = h->cmd_pool + tag_index; + finish_cmd(c, raw_tag); + continue; + } + tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag); + c = NULL; + hlist_for_each_entry(c, tmp, &h->cmpQ, list) { + if (c->busaddr == tag) { + finish_cmd(c, raw_tag); + break; + } + } + } + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +/* Send a message CDB to the firmware. */ +static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, + unsigned char type) +{ + struct Command { + struct CommandListHeader CommandHeader; + struct RequestBlock Request; + struct ErrDescriptor ErrorDescriptor; + }; + struct Command *cmd; + static const size_t cmd_sz = sizeof(*cmd) + + sizeof(cmd->ErrorDescriptor); + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = pci_ioremap_bar(pdev, 0); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + * CCISS commands, so they must be allocated from the lower 4GiB of + * memory. + */ + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + * although there's no guarantee, we assume that the address is at + * least 4-byte aligned (most likely, it's page-aligned). + */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32) + break; + msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + * still complete the command. + */ + if (i == HPSA_MSG_SEND_RETRY_LIMIT) { + dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & HPSA_ERROR_BIT) { + dev_err(&pdev->dev, "controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0) +#define hpsa_noop(p) hpsa_message(p, 3, 0) + +static __devinit int hpsa_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. + */ +static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + * + * pci_save_state(pci_dev); + * pci_set_power_state(pci_dev, PCI_D3hot); + * pci_set_power_state(pci_dev, PCI_D0); + * pci_restore_state(pci_dev); + * + * but we can't use these nice canned kernel routines on + * kexec, because they also check the MSI/MSI-X state in PCI + * configuration space and do the wrong thing when it is + * set/cleared. Also, the pci_save/restore_state functions + * violate the ordering requirements for restoring the + * configuration space from the CCISS document (see the + * comment below). So we roll our own .... + */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + dev_err(&pdev->dev, + "hpsa_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." + */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. + */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + +/* + * We cannot read the structure directly, for portability we must use + * the io functions. + * This is for debug only. + */ +#ifdef HPSA_DEBUG +static void print_cfg_table(struct device *dev, struct CfgTable *tb) +{ + int i; + char temp_name[17]; + + dev_info(dev, "Controller Configuration information\n"); + dev_info(dev, "------------------------------------\n"); + for (i = 0; i < 4; i++) + temp_name[i] = readb(&(tb->Signature[i])); + temp_name[4] = '\0'; + dev_info(dev, " Signature = %s\n", temp_name); + dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); + dev_info(dev, " Transport methods supported = 0x%x\n", + readl(&(tb->TransportSupport))); + dev_info(dev, " Transport methods active = 0x%x\n", + readl(&(tb->TransportActive))); + dev_info(dev, " Requested transport Method = 0x%x\n", + readl(&(tb->HostWrite.TransportRequest))); + dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", + readl(&(tb->HostWrite.CoalIntDelay))); + dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", + readl(&(tb->HostWrite.CoalIntCount))); + dev_info(dev, " Max outstanding commands = 0x%d\n", + readl(&(tb->CmdsOutMax))); + dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); + for (i = 0; i < 16; i++) + temp_name[i] = readb(&(tb->ServerName[i])); + temp_name[16] = '\0'; + dev_info(dev, " Server Name = %s\n", temp_name); + dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", + readl(&(tb->HeartBeat))); +} +#endif /* HPSA_DEBUG */ + +static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) +{ + int i, offset, mem_type, bar_type; + + if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ + return 0; + offset = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; + if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) + offset += 4; + else { + mem_type = pci_resource_flags(pdev, i) & + PCI_BASE_ADDRESS_MEM_TYPE_MASK; + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + offset += 4; /* 32 bit */ + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + offset += 8; + break; + default: /* reserved in PCI 2.2 */ + dev_warn(&pdev->dev, + "base address is invalid\n"); + return -1; + break; + } + } + if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) + return i + 1; + } + return -1; +} + +/* If MSI/MSI-X is supported by the kernel we will try to enable it on + * controllers that are capable. If not, we use IO-APIC mode. + */ + +static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, + struct pci_dev *pdev, __u32 board_id) +{ +#ifdef CONFIG_PCI_MSI + int err; + struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1}, + {0, 2}, {0, 3} + }; + + /* Some boards advertise MSI but don't really support it */ + if ((board_id == 0x40700E11) || + (board_id == 0x40800E11) || + (board_id == 0x40820E11) || (board_id == 0x40830E11)) + goto default_int_mode; + if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { + dev_info(&pdev->dev, "MSIX\n"); + err = pci_enable_msix(pdev, hpsa_msix_entries, 4); + if (!err) { + h->intr[0] = hpsa_msix_entries[0].vector; + h->intr[1] = hpsa_msix_entries[1].vector; + h->intr[2] = hpsa_msix_entries[2].vector; + h->intr[3] = hpsa_msix_entries[3].vector; + h->msix_vector = 1; + return; + } + if (err > 0) { + dev_warn(&pdev->dev, "only %d MSI-X vectors " + "available\n", err); + goto default_int_mode; + } else { + dev_warn(&pdev->dev, "MSI-X init failed %d\n", + err); + goto default_int_mode; + } + } + if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { + dev_info(&pdev->dev, "MSI\n"); + if (!pci_enable_msi(pdev)) + h->msi_vector = 1; + else + dev_warn(&pdev->dev, "MSI init failed\n"); + } +default_int_mode: +#endif /* CONFIG_PCI_MSI */ + /* if we get here we're going to use the default interrupt mode */ + h->intr[SIMPLE_MODE_INT] = pdev->irq; + return; +} + +static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) +{ + ushort subsystem_vendor_id, subsystem_device_id, command; + __u32 board_id, scratchpad = 0; + __u64 cfg_offset; + __u32 cfg_base_addr; + __u64 cfg_base_addr_index; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) + if (board_id == products[i].board_id) + break; + + prod_index = i; + + if (prod_index == ARRAY_SIZE(products)) { + prod_index--; + if (subsystem_vendor_id != PCI_VENDOR_ID_HP || + !hpsa_allow_any) { + dev_warn(&pdev->dev, "unrecognized board ID:" + " 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } + } + /* check to see if controller has been disabled + * BEFORE trying to enable it + */ + (void)pci_read_config_word(pdev, PCI_COMMAND, &command); + if (!(command & 0x02)) { + dev_warn(&pdev->dev, "controller appears to be disabled\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_warn(&pdev->dev, "unable to enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, "hpsa"); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); + return err; + } + + /* If the kernel supports MSI/MSI-X we will try to enable that, + * else we use the IO-APIC interrupt assigned to us by system ROM. + */ + hpsa_interrupt_mode(h, pdev, board_id); + + /* find the memory BAR */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) + break; + } + if (i == DEVICE_COUNT_RESOURCE) { + dev_warn(&pdev->dev, "no memory BAR found\n"); + err = -ENODEV; + goto err_out_free_res; + } + + h->paddr = pci_resource_start(pdev, i); /* addressing mode bits + * already removed + */ + + h->vaddr = remap_pci_mem(h->paddr, 0x250); + + /* Wait for the board to become ready. */ + for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) { + scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + if (scratchpad == HPSA_FIRMWARE_READY) + break; + msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); + } + if (scratchpad != HPSA_FIRMWARE_READY) { + dev_warn(&pdev->dev, "board not ready, timed out.\n"); + err = -ENODEV; + goto err_out_free_res; + } + + /* get the address index number */ + cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET); + cfg_base_addr &= (__u32) 0x0000ffff; + cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); + if (cfg_base_addr_index == -1) { + dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); + err = -ENODEV; + goto err_out_free_res; + } + + cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET); + h->cfgtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset, + sizeof(h->cfgtable)); + h->board_id = board_id; + + /* Query controller for max supported commands: */ + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + + h->product_name = products[prod_index].product_name; + h->access = *(products[prod_index].access); + /* Allow room for some ioctls */ + h->nr_cmds = h->max_commands - 4; + + if ((readb(&h->cfgtable->Signature[0]) != 'C') || + (readb(&h->cfgtable->Signature[1]) != 'I') || + (readb(&h->cfgtable->Signature[2]) != 'S') || + (readb(&h->cfgtable->Signature[3]) != 'S')) { + dev_warn(&pdev->dev, "not a valid CISS config table\n"); + err = -ENODEV; + goto err_out_free_res; + } +#ifdef CONFIG_X86 + { + /* Need to enable prefetch in the SCSI core for 6400 in x86 */ + __u32 prefetch; + prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); + prefetch |= 0x100; + writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); + } +#endif + + /* Disabling DMA prefetch for the P600 + * An ASIC bug may result in a prefetch beyond + * physical memory. + */ + if (board_id == 0x3225103C) { + __u32 dma_prefetch; + dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); + dma_prefetch |= 0x8000; + writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); + } + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) + */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + msleep(10); + } + +#ifdef HPSA_DEBUG + print_cfg_table(&pdev->dev, h->cfgtable); +#endif /* HPSA_DEBUG */ + + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&pdev->dev, "unable to get board into simple mode\n"); + err = -ENODEV; + goto err_out_free_res; + } + return 0; + +err_out_free_res: + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + return err; +} + +static int __devinit hpsa_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int i; + int dac; + struct ctlr_info *h; + + if (number_of_controllers == 0) + printk(KERN_INFO DRIVER_NAME "\n"); + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + msleep(HPSA_POST_RESET_PAUSE_MSECS); + + /* Now try to get the controller to respond to a no-op */ + for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { + if (hpsa_noop(pdev) == 0) + break; + else + dev_warn(&pdev->dev, "no-op failed%s\n", + (i < 11 ? "; re-trying" : "")); + } + } + + BUILD_BUG_ON(sizeof(struct CommandList) % 8); + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return -1; + + h->busy_initializing = 1; + INIT_HLIST_HEAD(&h->cmpQ); + INIT_HLIST_HEAD(&h->reqQ); + mutex_init(&h->busy_shutting_down); + init_completion(&h->scan_wait); + if (hpsa_pci_init(h, pdev) != 0) + goto clean1; + + sprintf(h->devname, "hpsa%d", number_of_controllers); + h->ctlr = number_of_controllers; + number_of_controllers++; + h->pdev = pdev; + + /* configure PCI DMA stuff */ + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) + dac = 1; + else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) + dac = 0; + else { + dev_err(&pdev->dev, "no suitable DMA available\n"); + goto clean1; + } + + /* make sure the board interrupts are off */ + h->access.set_intr_mask(h, HPSA_INTR_OFF); + if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr, + IRQF_DISABLED | IRQF_SHARED, h->devname, h)) { + dev_err(&pdev->dev, "unable to get irq %d for %s\n", + h->intr[SIMPLE_MODE_INT], h->devname); + goto clean2; + } + + dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", + h->devname, pdev->device, pci_name(pdev), + h->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + + h->cmd_pool_bits = + kmalloc(((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); + h->cmd_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->cmd_pool), + &(h->cmd_pool_dhandle)); + h->errinfo_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->errinfo_pool), + &(h->errinfo_pool_dhandle)); + if ((h->cmd_pool_bits == NULL) + || (h->cmd_pool == NULL) + || (h->errinfo_pool == NULL)) { + dev_err(&pdev->dev, "out of memory"); + goto clean4; + } + spin_lock_init(&h->lock); + + pci_set_drvdata(pdev, h); + memset(h->cmd_pool_bits, 0, + ((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long)); + + hpsa_scsi_setup(h); + + /* Turn the interrupts on so we can service requests */ + h->access.set_intr_mask(h, HPSA_INTR_ON); + + hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ + h->busy_initializing = 0; + return 1; + +clean4: + kfree(h->cmd_pool_bits); + if (h->cmd_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + if (h->errinfo_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, + h->errinfo_pool_dhandle); + free_irq(h->intr[SIMPLE_MODE_INT], h); +clean2: +clean1: + h->busy_initializing = 0; + kfree(h); + return -1; +} + +static void hpsa_flush_cache(struct ctlr_info *h) +{ + char *flush_buf; + struct CommandList *c; + + flush_buf = kzalloc(4, GFP_KERNEL); + if (!flush_buf) + return; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + goto out_of_memory; + } + fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); + if (c->err_info->CommandStatus != 0) + dev_warn(&h->pdev->dev, + "error flushing cache on controller\n"); + cmd_special_free(h, c); +out_of_memory: + kfree(flush_buf); +} + +static void hpsa_shutdown(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + h = pci_get_drvdata(pdev); + /* Turn board interrupts off and send the flush cache command + * sendcmd will turn off interrupt, and send the flush... + * To write all data in the battery backed cache to disks + */ + hpsa_flush_cache(h); + h->access.set_intr_mask(h, HPSA_INTR_OFF); + free_irq(h->intr[2], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ +} + +static void __devexit hpsa_remove_one(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + if (pci_get_drvdata(pdev) == NULL) { + dev_err(&pdev->dev, "unable to remove device \n"); + return; + } + h = pci_get_drvdata(pdev); + mutex_lock(&h->busy_shutting_down); + remove_from_scan_list(h); + hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ + hpsa_shutdown(pdev); + iounmap(h->vaddr); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, h->errinfo_pool_dhandle); + kfree(h->cmd_pool_bits); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + mutex_unlock(&h->busy_shutting_down); + kfree(h); +} + +static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, + __attribute__((unused)) pm_message_t state) +{ + return -ENOSYS; +} + +static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) +{ + return -ENOSYS; +} + +static struct pci_driver hpsa_pci_driver = { + .name = "hpsa", + .probe = hpsa_init_one, + .remove = __devexit_p(hpsa_remove_one), + .id_table = hpsa_pci_device_id, /* id_table */ + .shutdown = hpsa_shutdown, + .suspend = hpsa_suspend, + .resume = hpsa_resume, +}; + +/* + * This is it. Register the PCI driver information for the cards we control + * the OS will call our registered routines when it finds one of our cards. + */ +static int __init hpsa_init(void) +{ + int err; + /* Start the scan thread */ + hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan"); + if (IS_ERR(hpsa_scan_thread)) { + err = PTR_ERR(hpsa_scan_thread); + return -ENODEV; + } + err = pci_register_driver(&hpsa_pci_driver); + if (err) + kthread_stop(hpsa_scan_thread); + return err; +} + +static void __exit hpsa_cleanup(void) +{ + pci_unregister_driver(&hpsa_pci_driver); + kthread_stop(hpsa_scan_thread); +} + +module_init(hpsa_init); +module_exit(hpsa_cleanup); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h new file mode 100644 index 000000000000..6bd1949144b5 --- /dev/null +++ b/drivers/scsi/hpsa.h @@ -0,0 +1,273 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_H +#define HPSA_H + +#include <scsi/scsicam.h> + +#define IO_OK 0 +#define IO_ERROR 1 + +struct ctlr_info; + +struct access_method { + void (*submit_command)(struct ctlr_info *h, + struct CommandList *c); + void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); + unsigned long (*fifo_full)(struct ctlr_info *h); + unsigned long (*intr_pending)(struct ctlr_info *h); + unsigned long (*command_completed)(struct ctlr_info *h); +}; + +struct hpsa_scsi_dev_t { + int devtype; + int bus, target, lun; /* as presented to the OS */ + unsigned char scsi3addr[8]; /* as presented to the HW */ +#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" + unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ + unsigned char model[16]; /* bytes 16-31 of inquiry data */ + unsigned char revision[4]; /* bytes 32-35 of inquiry data */ + unsigned char raid_level; /* from inquiry page 0xC1 */ +}; + +struct ctlr_info { + int ctlr; + char devname[8]; + char *product_name; + char firm_ver[4]; /* Firmware version */ + struct pci_dev *pdev; + __u32 board_id; + void __iomem *vaddr; + unsigned long paddr; + int nr_cmds; /* Number of commands allowed on this controller */ + struct CfgTable __iomem *cfgtable; + int interrupts_enabled; + int major; + int max_commands; + int commands_outstanding; + int max_outstanding; /* Debug */ + int usage_count; /* number of opens all all minor devices */ +# define DOORBELL_INT 0 +# define PERF_MODE_INT 1 +# define SIMPLE_MODE_INT 2 +# define MEMQ_MODE_INT 3 + unsigned int intr[4]; + unsigned int msix_vector; + unsigned int msi_vector; + struct access_method access; + + /* queue and queue Info */ + struct hlist_head reqQ; + struct hlist_head cmpQ; + unsigned int Qdepth; + unsigned int maxQsinceinit; + unsigned int maxSG; + spinlock_t lock; + + /* pointers to command and error info pool */ + struct CommandList *cmd_pool; + dma_addr_t cmd_pool_dhandle; + struct ErrorInfo *errinfo_pool; + dma_addr_t errinfo_pool_dhandle; + unsigned long *cmd_pool_bits; + int nr_allocs; + int nr_frees; + int busy_initializing; + int busy_scanning; + struct mutex busy_shutting_down; + struct list_head scan_list; + struct completion scan_wait; + + struct Scsi_Host *scsi_host; + spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ + int ndevices; /* number of used elements in .dev[] array. */ +#define HPSA_MAX_SCSI_DEVS_PER_HBA 256 + struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA]; +}; +#define HPSA_ABORT_MSG 0 +#define HPSA_DEVICE_RESET_MSG 1 +#define HPSA_BUS_RESET_MSG 2 +#define HPSA_HOST_RESET_MSG 3 +#define HPSA_MSG_SEND_RETRY_LIMIT 10 +#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000 + +/* Maximum time in seconds driver will wait for command completions + * when polling before giving up. + */ +#define HPSA_MAX_POLL_TIME_SECS (20) + +/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines + * how many times to retry TEST UNIT READY on a device + * while waiting for it to become ready before giving up. + * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval + * between sending TURs while waiting for a device + * to become ready. + */ +#define HPSA_TUR_RETRY_LIMIT (20) +#define HPSA_MAX_WAIT_INTERVAL_SECS (30) + +/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board + * to become ready, in seconds, before giving up on it. + * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait + * between polling the board to see if it is ready, in + * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and + * HPSA_BOARD_READY_ITERATIONS are derived from those. + */ +#define HPSA_BOARD_READY_WAIT_SECS (120) +#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100) +#define HPSA_BOARD_READY_POLL_INTERVAL \ + ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000) +#define HPSA_BOARD_READY_ITERATIONS \ + ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \ + HPSA_BOARD_READY_POLL_INTERVAL_MSECS) +#define HPSA_POST_RESET_PAUSE_MSECS (3000) +#define HPSA_POST_RESET_NOOP_RETRIES (12) + +/* Defining the diffent access_menthods */ +/* + * Memory mapped FIFO interface (SMART 53xx cards) + */ +#define SA5_DOORBELL 0x20 +#define SA5_REQUEST_PORT_OFFSET 0x40 +#define SA5_REPLY_INTR_MASK_OFFSET 0x34 +#define SA5_REPLY_PORT_OFFSET 0x44 +#define SA5_INTR_STATUS 0x30 +#define SA5_SCRATCHPAD_OFFSET 0xB0 + +#define SA5_CTCFG_OFFSET 0xB4 +#define SA5_CTMEM_OFFSET 0xB8 + +#define SA5_INTR_OFF 0x08 +#define SA5B_INTR_OFF 0x04 +#define SA5_INTR_PENDING 0x08 +#define SA5B_INTR_PENDING 0x04 +#define FIFO_EMPTY 0xffffffff +#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ + +#define HPSA_ERROR_BIT 0x02 +#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04) +#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3) +#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3) + +#define HPSA_INTR_ON 1 +#define HPSA_INTR_OFF 0 +/* + Send the command to the hardware +*/ +static void SA5_submit_command(struct ctlr_info *h, + struct CommandList *c) +{ +#ifdef HPSA_DEBUG + printk(KERN_WARNING "hpsa: Sending %x - down to controller\n", + c->busaddr); +#endif /* HPSA_DEBUG */ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + h->commands_outstanding++; + if (h->commands_outstanding > h->max_outstanding) + h->max_outstanding = h->commands_outstanding; +} + +/* + * This card is the opposite of the other cards. + * 0 turns interrupts on... + * 0x08 turns them off... + */ +static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* Turn interrupts on */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { /* Turn them off */ + h->interrupts_enabled = 0; + writel(SA5_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} +/* + * Returns true if fifo is full. + * + */ +static unsigned long SA5_fifo_full(struct ctlr_info *h) +{ + if (h->commands_outstanding >= h->max_commands) + return 1; + else + return 0; + +} +/* + * returns value read from hardware. + * returns FIFO_EMPTY if there is nothing to read + */ +static unsigned long SA5_completed(struct ctlr_info *h) +{ + unsigned long register_value + = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); + + if (register_value != FIFO_EMPTY) + h->commands_outstanding--; + +#ifdef HPSA_DEBUG + if (register_value != FIFO_EMPTY) + printk(KERN_INFO "hpsa: Read %lx back from board\n", + register_value); + else + printk(KERN_INFO "hpsa: FIFO Empty read\n"); +#endif + + return register_value; +} +/* + * Returns true if an interrupt is pending.. + */ +static unsigned long SA5_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = + readl(h->vaddr + SA5_INTR_STATUS); +#ifdef HPSA_DEBUG + printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value); +#endif /* HPSA_DEBUG */ + if (register_value & SA5_INTR_PENDING) + return 1; + return 0 ; +} + + +static struct access_method SA5_access = { + SA5_submit_command, + SA5_intr_mask, + SA5_fifo_full, + SA5_intr_pending, + SA5_completed, +}; + +struct board_type { + __u32 board_id; + char *product_name; + struct access_method *access; +}; + + +/* end of old hpsa_scsi.h file */ + +#endif /* HPSA_H */ + diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h new file mode 100644 index 000000000000..12d71387ed9a --- /dev/null +++ b/drivers/scsi/hpsa_cmd.h @@ -0,0 +1,326 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_CMD_H +#define HPSA_CMD_H + +/* general boundary defintions */ +#define SENSEINFOBYTES 32 /* may vary between hbas */ +#define MAXSGENTRIES 31 +#define MAXREPLYQS 256 + +/* Command Status value */ +#define CMD_SUCCESS 0x0000 +#define CMD_TARGET_STATUS 0x0001 +#define CMD_DATA_UNDERRUN 0x0002 +#define CMD_DATA_OVERRUN 0x0003 +#define CMD_INVALID 0x0004 +#define CMD_PROTOCOL_ERR 0x0005 +#define CMD_HARDWARE_ERR 0x0006 +#define CMD_CONNECTION_LOST 0x0007 +#define CMD_ABORTED 0x0008 +#define CMD_ABORT_FAILED 0x0009 +#define CMD_UNSOLICITED_ABORT 0x000A +#define CMD_TIMEOUT 0x000B +#define CMD_UNABORTABLE 0x000C + +/* Unit Attentions ASC's as defined for the MSA2012sa */ +#define POWER_OR_RESET 0x29 +#define STATE_CHANGED 0x2a +#define UNIT_ATTENTION_CLEARED 0x2f +#define LUN_FAILED 0x3e +#define REPORT_LUNS_CHANGED 0x3f + +/* Unit Attentions ASCQ's as defined for the MSA2012sa */ + + /* These ASCQ's defined for ASC = POWER_OR_RESET */ +#define POWER_ON_RESET 0x00 +#define POWER_ON_REBOOT 0x01 +#define SCSI_BUS_RESET 0x02 +#define MSA_TARGET_RESET 0x03 +#define CONTROLLER_FAILOVER 0x04 +#define TRANSCEIVER_SE 0x05 +#define TRANSCEIVER_LVD 0x06 + + /* These ASCQ's defined for ASC = STATE_CHANGED */ +#define RESERVATION_PREEMPTED 0x03 +#define ASYM_ACCESS_CHANGED 0x06 +#define LUN_CAPACITY_CHANGED 0x09 + +/* transfer direction */ +#define XFER_NONE 0x00 +#define XFER_WRITE 0x01 +#define XFER_READ 0x02 +#define XFER_RSVD 0x03 + +/* task attribute */ +#define ATTR_UNTAGGED 0x00 +#define ATTR_SIMPLE 0x04 +#define ATTR_HEADOFQUEUE 0x05 +#define ATTR_ORDERED 0x06 +#define ATTR_ACA 0x07 + +/* cdb type */ +#define TYPE_CMD 0x00 +#define TYPE_MSG 0x01 + +/* config space register offsets */ +#define CFG_VENDORID 0x00 +#define CFG_DEVICEID 0x02 +#define CFG_I2OBAR 0x10 +#define CFG_MEM1BAR 0x14 + +/* i2o space register offsets */ +#define I2O_IBDB_SET 0x20 +#define I2O_IBDB_CLEAR 0x70 +#define I2O_INT_STATUS 0x30 +#define I2O_INT_MASK 0x34 +#define I2O_IBPOST_Q 0x40 +#define I2O_OBPOST_Q 0x44 +#define I2O_DMA1_CFG 0x214 + +/* Configuration Table */ +#define CFGTBL_ChangeReq 0x00000001l +#define CFGTBL_AccCmds 0x00000001l + +#define CFGTBL_Trans_Simple 0x00000002l + +#define CFGTBL_BusType_Ultra2 0x00000001l +#define CFGTBL_BusType_Ultra3 0x00000002l +#define CFGTBL_BusType_Fibre1G 0x00000100l +#define CFGTBL_BusType_Fibre2G 0x00000200l +struct vals32 { + __u32 lower; + __u32 upper; +}; + +union u64bit { + struct vals32 val32; + __u64 val; +}; + +/* FIXME this is a per controller value (barf!) */ +#define HPSA_MAX_TARGETS_PER_CTLR 16 +#define HPSA_MAX_LUN 256 +#define HPSA_MAX_PHYS_LUN 1024 + +/* SCSI-3 Commands */ +#pragma pack(1) + +#define HPSA_INQUIRY 0x12 +struct InquiryData { + __u8 data_byte[36]; +}; + +#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ +#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ +struct ReportLUNdata { + __u8 LUNListLength[4]; + __u32 reserved; + __u8 LUN[HPSA_MAX_LUN][8]; +}; + +struct ReportExtendedLUNdata { + __u8 LUNListLength[4]; + __u8 extended_response_flag; + __u8 reserved[3]; + __u8 LUN[HPSA_MAX_LUN][24]; +}; + +struct SenseSubsystem_info { + __u8 reserved[36]; + __u8 portname[8]; + __u8 reserved1[1108]; +}; + +#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */ +struct ReadCapdata { + __u8 total_size[4]; /* Total size in blocks */ + __u8 block_size[4]; /* Size of blocks in bytes */ +}; + +#if 0 +/* 12 byte commands not implemented in firmware yet. */ +#define HPSA_READ 0xa8 +#define HPSA_WRITE 0xaa +#endif + +#define HPSA_READ 0x28 /* Read(10) */ +#define HPSA_WRITE 0x2a /* Write(10) */ + +/* BMIC commands */ +#define BMIC_READ 0x26 +#define BMIC_WRITE 0x27 +#define BMIC_CACHE_FLUSH 0xc2 +#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ + +/* Command List Structure */ +union SCSI3Addr { + struct { + __u8 Dev; + __u8 Bus:6; + __u8 Mode:2; /* b00 */ + } PeripDev; + struct { + __u8 DevLSB; + __u8 DevMSB:6; + __u8 Mode:2; /* b01 */ + } LogDev; + struct { + __u8 Dev:5; + __u8 Bus:3; + __u8 Targ:6; + __u8 Mode:2; /* b10 */ + } LogUnit; +}; + +struct PhysDevAddr { + __u32 TargetId:24; + __u32 Bus:6; + __u32 Mode:2; + /* 2 level target device addr */ + union SCSI3Addr Target[2]; +}; + +struct LogDevAddr { + __u32 VolId:30; + __u32 Mode:2; + __u8 reserved[4]; +}; + +union LUNAddr { + __u8 LunAddrBytes[8]; + union SCSI3Addr SCSI3Lun[4]; + struct PhysDevAddr PhysDev; + struct LogDevAddr LogDev; +}; + +struct CommandListHeader { + __u8 ReplyQueue; + __u8 SGList; + __u16 SGTotal; + struct vals32 Tag; + union LUNAddr LUN; +}; + +struct RequestBlock { + __u8 CDBLen; + struct { + __u8 Type:3; + __u8 Attribute:3; + __u8 Direction:2; + } Type; + __u16 Timeout; + __u8 CDB[16]; +}; + +struct ErrDescriptor { + struct vals32 Addr; + __u32 Len; +}; + +struct SGDescriptor { + struct vals32 Addr; + __u32 Len; + __u32 Ext; +}; + +union MoreErrInfo { + struct { + __u8 Reserved[3]; + __u8 Type; + __u32 ErrorInfo; + } Common_Info; + struct { + __u8 Reserved[2]; + __u8 offense_size; /* size of offending entry */ + __u8 offense_num; /* byte # of offense 0-base */ + __u32 offense_value; + } Invalid_Cmd; +}; +struct ErrorInfo { + __u8 ScsiStatus; + __u8 SenseLen; + __u16 CommandStatus; + __u32 ResidualCnt; + union MoreErrInfo MoreErrInfo; + __u8 SenseInfo[SENSEINFOBYTES]; +}; +/* Command types */ +#define CMD_IOCTL_PEND 0x01 +#define CMD_SCSI 0x03 + +struct ctlr_info; /* defined in hpsa.h */ +/* The size of this structure needs to be divisible by 8 + * od on all architectures, because the controller uses 2 + * lower bits of the address, and the driver uses 1 lower + * bit (3 bits total.) + */ +struct CommandList { + struct CommandListHeader Header; + struct RequestBlock Request; + struct ErrDescriptor ErrDesc; + struct SGDescriptor SG[MAXSGENTRIES]; + /* information associated with the command */ + __u32 busaddr; /* physical addr of this record */ + struct ErrorInfo *err_info; /* pointer to the allocated mem */ + struct ctlr_info *h; + int cmd_type; + long cmdindex; + struct hlist_node list; + struct CommandList *prev; + struct CommandList *next; + struct request *rq; + struct completion *waiting; + int retry_count; + void *scsi_cmd; +}; + +/* Configuration Table Structure */ +struct HostWrite { + __u32 TransportRequest; + __u32 Reserved; + __u32 CoalIntDelay; + __u32 CoalIntCount; +}; + +struct CfgTable { + __u8 Signature[4]; + __u32 SpecValence; + __u32 TransportSupport; + __u32 TransportActive; + struct HostWrite HostWrite; + __u32 CmdsOutMax; + __u32 BusTypes; + __u32 Reserved; + __u8 ServerName[16]; + __u32 HeartBeat; + __u32 SCSI_Prefetch; +}; + +struct hpsa_pci_info { + unsigned char bus; + unsigned char dev_fn; + unsigned short domain; + __u32 board_id; +}; + +#pragma pack() +#endif /* HPSA_CMD_H */ diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 8643f5089361..9e52d16c7c39 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6521,6 +6521,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + ioa_cfg->pdev->state_saved = true; rc = pci_restore_state(ioa_cfg->pdev); if (rc != PCIBIOS_SUCCESSFUL) { diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index c4b58d042f6f..881d5dfe8c74 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -68,18 +68,20 @@ struct kmem_cache *scsi_pkt_cachep; /** * struct fc_fcp_internal - FCP layer internal data - * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_queue_lock: Protects the scsi_pkt_queue * @scsi_pkt_queue: Current FCP packets * @last_can_queue_ramp_down_time: ramp down time * @last_can_queue_ramp_up_time: ramp up time * @max_can_queue: max can_queue size */ struct fc_fcp_internal { - mempool_t *scsi_pkt_pool; - struct list_head scsi_pkt_queue; - unsigned long last_can_queue_ramp_down_time; - unsigned long last_can_queue_ramp_up_time; - int max_can_queue; + mempool_t *scsi_pkt_pool; + spinlock_t scsi_queue_lock; + struct list_head scsi_pkt_queue; + unsigned long last_can_queue_ramp_down_time; + unsigned long last_can_queue_ramp_up_time; + int max_can_queue; }; #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) @@ -410,12 +412,14 @@ static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport, unsigned long flags; fp = fc_frame_alloc(lport, len); - if (!fp) { - spin_lock_irqsave(lport->host->host_lock, flags); - fc_fcp_can_queue_ramp_down(lport); - spin_unlock_irqrestore(lport->host->host_lock, flags); - } - return fp; + if (likely(fp)) + return fp; + + /* error case */ + spin_lock_irqsave(lport->host->host_lock, flags); + fc_fcp_can_queue_ramp_down(lport); + spin_unlock_irqrestore(lport->host->host_lock, flags); + return NULL; } /** @@ -990,7 +994,7 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, struct scsi_cmnd *sc_cmd; unsigned long flags; - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); restart: list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { sc_cmd = fsp->cmd; @@ -1001,7 +1005,7 @@ restart: continue; fc_fcp_pkt_hold(fsp); - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); if (!fc_fcp_lock_pkt(fsp)) { fc_fcp_cleanup_cmd(fsp, error); @@ -1010,14 +1014,14 @@ restart: } fc_fcp_pkt_release(fsp); - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); /* * while we dropped the lock multiple pkts could * have been released, so we have to start over. */ goto restart; } - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); } /** @@ -1035,11 +1039,12 @@ static void fc_fcp_abort_io(struct fc_lport *lport) * @fsp: The FCP packet to send * * Return: Zero for success and -1 for failure - * Locks: Called with the host lock and irqs disabled. + * Locks: Called without locks held */ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) { struct fc_fcp_internal *si = fc_get_scsi_internal(lport); + unsigned long flags; int rc; fsp->cmd->SCp.ptr = (char *)fsp; @@ -1049,13 +1054,16 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) int_to_scsilun(fsp->cmd->device->lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); - list_add_tail(&fsp->list, &si->scsi_pkt_queue); - spin_unlock_irq(lport->host->host_lock); + spin_lock_irqsave(&si->scsi_queue_lock, flags); + list_add_tail(&fsp->list, &si->scsi_pkt_queue); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv); - spin_lock_irq(lport->host->host_lock); - if (rc) + if (unlikely(rc)) { + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); + } return rc; } @@ -1752,6 +1760,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) struct fcoe_dev_stats *stats; lport = shost_priv(sc_cmd->device->host); + spin_unlock_irq(lport->host->host_lock); rval = fc_remote_port_chkready(rport); if (rval) { @@ -1834,6 +1843,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) rc = SCSI_MLQUEUE_HOST_BUSY; } out: + spin_lock_irq(lport->host->host_lock); return rc; } EXPORT_SYMBOL(fc_queuecommand); @@ -1864,11 +1874,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) lport = fsp->lp; si = fc_get_scsi_internal(lport); - spin_lock_irqsave(lport->host->host_lock, flags); - if (!fsp->cmd) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!fsp->cmd) return; - } /* * if can_queue ramp down is done then try can_queue ramp up @@ -1880,10 +1887,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd = fsp->cmd; fsp->cmd = NULL; - if (!sc_cmd->SCp.ptr) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!sc_cmd->SCp.ptr) return; - } CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; switch (fsp->status_code) { @@ -1945,10 +1950,11 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) break; } + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); sc_cmd->SCp.ptr = NULL; sc_cmd->scsi_done(sc_cmd); - spin_unlock_irqrestore(lport->host->host_lock, flags); /* release ref from initial allocation in queue command */ fc_fcp_pkt_release(fsp); @@ -2216,6 +2222,7 @@ int fc_fcp_init(struct fc_lport *lport) lport->scsi_priv = si; si->max_can_queue = lport->host->can_queue; INIT_LIST_HEAD(&si->scsi_pkt_queue); + spin_lock_init(&si->scsi_queue_lock); si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); if (!si->scsi_pkt_pool) { diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 74338c83ad0a..0b165024a219 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -537,7 +537,9 @@ int fc_fabric_login(struct fc_lport *lport) int rc = -1; mutex_lock(&lport->lp_mutex); - if (lport->state == LPORT_ST_DISABLED) { + if (lport->state == LPORT_ST_DISABLED || + lport->state == LPORT_ST_LOGO) { + fc_lport_state_enter(lport, LPORT_ST_RESET); fc_lport_enter_reset(lport); rc = 0; } @@ -967,6 +969,9 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FC_LPORT_DBG(lport, "Entered RESET state from %s state\n", fc_lport_state(lport)); + if (lport->state == LPORT_ST_DISABLED || lport->state == LPORT_ST_LOGO) + return; + if (lport->vport) { if (lport->link_up) fc_vport_set_state(lport->vport, FC_VPORT_INITIALIZING); diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 35ca0e72df46..02300523b234 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -310,6 +310,7 @@ static void fc_rport_work(struct work_struct *work) restart = 1; else list_del(&rdata->peers); + rdata->event = RPORT_EV_NONE; mutex_unlock(&rdata->rp_mutex); mutex_unlock(&lport->disc.disc_mutex); } diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 226920d15ea1..d4da6bdd0e73 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4506,9 +4506,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of Bar0 and Bar2 and the number of bytes * required by each mapping. @@ -6021,9 +6025,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the * number of bytes required by each mapping. They are actually diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 134c63ef6d38..99ff99e45bee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2501,7 +2501,9 @@ static int megasas_init_mfi(struct megasas_instance *instance) instance->base_addr = pci_resource_start(instance->pdev, 0); } - if (pci_request_regions(instance->pdev, "megasas: LSI")) { + if (pci_request_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM), + "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } @@ -2642,7 +2644,8 @@ static int megasas_init_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); fail_ioremap: - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); return -EINVAL; } @@ -2662,7 +2665,8 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); } /** @@ -2971,7 +2975,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { return rval; @@ -3276,7 +3280,7 @@ megasas_resume(struct pci_dev *pdev) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { printk(KERN_ERR "megasas: Enable device failed\n"); diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6422e258fd52..89d02401b9ec 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3583,6 +3583,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->transport_cmds.status = MPT2_CMD_NOT_USED; mutex_init(&ioc->transport_cmds.mutex); + /* scsih internal command bits */ + ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->scsih_cmds.mutex); + /* task management internal command bits */ ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index c790d45876c4..cae6b2cf492f 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -657,6 +657,7 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = { { PCI_VDEVICE(MARVELL, 0x9180), chip_9180 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 }, + { PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 }, { } /* terminate list */ }; diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 950202a70bcf..24223473f573 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -432,30 +432,23 @@ static void _osd_free_seg(struct osd_request *or __unused, seg->alloc_size = 0; } -static void _put_request(struct request *rq , bool is_async) +static void _put_request(struct request *rq) { - if (is_async) { - WARN_ON(rq->bio); - __blk_put_request(rq->q, rq); - } else { - /* - * If osd_finalize_request() was called but the request was not - * executed through the block layer, then we must release BIOs. - * TODO: Keep error code in or->async_error. Need to audit all - * code paths. - */ - if (unlikely(rq->bio)) - blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); - else - blk_put_request(rq); - } + /* + * If osd_finalize_request() was called but the request was not + * executed through the block layer, then we must release BIOs. + * TODO: Keep error code in or->async_error. Need to audit all + * code paths. + */ + if (unlikely(rq->bio)) + blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); + else + blk_put_request(rq); } void osd_end_request(struct osd_request *or) { struct request *rq = or->request; - /* IMPORTANT: make sure this agrees with osd_execute_request_async */ - bool is_async = (or->request->end_io_data == or); _osd_free_seg(or, &or->set_attr); _osd_free_seg(or, &or->enc_get_attr); @@ -463,20 +456,34 @@ void osd_end_request(struct osd_request *or) if (rq) { if (rq->next_rq) { - _put_request(rq->next_rq, is_async); + _put_request(rq->next_rq); rq->next_rq = NULL; } - _put_request(rq, is_async); + _put_request(rq); } _osd_request_free(or); } EXPORT_SYMBOL(osd_end_request); +static void _set_error_resid(struct osd_request *or, struct request *req, + int error) +{ + or->async_error = error; + or->req_errors = req->errors ? : error; + or->sense_len = req->sense_len; + if (or->out.req) + or->out.residual = or->out.req->resid_len; + if (or->in.req) + or->in.residual = or->in.req->resid_len; +} + int osd_execute_request(struct osd_request *or) { - return or->async_error = - blk_execute_rq(or->request->q, NULL, or->request, 0); + int error = blk_execute_rq(or->request->q, NULL, or->request, 0); + + _set_error_resid(or, or->request, error); + return error; } EXPORT_SYMBOL(osd_execute_request); @@ -484,15 +491,17 @@ static void osd_request_async_done(struct request *req, int error) { struct osd_request *or = req->end_io_data; - or->async_error = error; - - if (unlikely(error)) { - OSD_DEBUG("osd_request_async_done error recieved %d " - "errors 0x%x\n", error, req->errors); - if (!req->errors) /* don't miss out on this one */ - req->errors = error; + _set_error_resid(or, req, error); + if (req->next_rq) { + __blk_put_request(req->q, req->next_rq); + req->next_rq = NULL; } + __blk_put_request(req->q, req); + or->request = NULL; + or->in.req = NULL; + or->out.req = NULL; + if (or->async_done) or->async_done(or, or->async_private); else @@ -1489,21 +1498,18 @@ int osd_req_decode_sense_full(struct osd_request *or, #endif int ret; - if (likely(!or->request->errors)) { - osi->out_resid = 0; - osi->in_resid = 0; + if (likely(!or->req_errors)) return 0; - } osi = osi ? : &local_osi; memset(osi, 0, sizeof(*osi)); - ssdb = or->request->sense; - sense_len = or->request->sense_len; + ssdb = (typeof(ssdb))or->sense; + sense_len = or->sense_len; if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { OSD_ERR("Block-layer returned error(0x%x) but " "sense_len(%u) || key(%d) is empty\n", - or->request->errors, sense_len, ssdb->sense_key); + or->req_errors, sense_len, ssdb->sense_key); goto analyze; } @@ -1525,7 +1531,7 @@ int osd_req_decode_sense_full(struct osd_request *or, "additional_code=0x%x async_error=%d errors=0x%x\n", osi->key, original_sense_len, sense_len, osi->additional_code, or->async_error, - or->request->errors); + or->req_errors); if (original_sense_len < sense_len) sense_len = original_sense_len; @@ -1695,10 +1701,10 @@ analyze: ret = -EIO; } - if (or->out.req) - osi->out_resid = or->out.req->resid_len ?: or->out.total_bytes; - if (or->in.req) - osi->in_resid = or->in.req->resid_len ?: or->in.total_bytes; + if (!or->out.residual) + or->out.residual = or->out.total_bytes; + if (!or->in.residual) + or->in.residual = or->in.total_bytes; return ret; } diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h index 22644de26399..63ad4aa0c422 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.h +++ b/drivers/scsi/pm8001/pm8001_ctl.h @@ -45,16 +45,6 @@ #define HEADER_LEN 28 #define SIZE_OFFSET 16 -struct pm8001_ioctl_payload { - u32 signature; - u16 major_function; - u16 minor_function; - u16 length; - u16 status; - u16 offset; - u16 id; - u8 func_specific[1]; -}; #define FLASH_OK 0x000000 #define FAIL_OPEN_BIOS_FILE 0x000100 diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index a3de306b9045..9b44c6f1b10e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) static void __devinit mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { - u32 offset; - u32 value; - u32 i, j; - u32 bit_cnt; + u32 value, offset, i; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) return; - /* set SSC bit of PHY 0 - 3 */ + for (i = 0; i < 4; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i; - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } - /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) return; - - /* set SSC bit of PHY 4 - 7 */ for (i = 4; i < 8; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4); - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } + /************************************************************* + Change the SSC upspreading value to 0x0 so that upspreading is disabled. + Device MABC SMOD0 Controls + Address: (via MEMBASE-III): + Using shifted destination address 0x0_0000: with Offset 0xD8 + + 31:28 R/W Reserved Do not change + 27:24 R/W SAS_SMOD_SPRDUP 0000 + 23:20 R/W SAS_SMOD_SPRDDN 0000 + 19:0 R/W Reserved Do not change + Upon power-up this register will read as 0x8990c016, + and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000 + so that the written value will be 0x8090c016. + This will ensure only down-spreading SSC is enabled on the SPC. + *************************************************************/ + value = pm8001_cr32(pm8001_ha, 2, 0xd8); + pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ bar4_shift(pm8001_ha, 0x0); @@ -1901,7 +1878,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) { struct sas_task *t; struct pm8001_ccb_info *ccb; - unsigned long flags; + unsigned long flags = 0; u32 param; u32 status; u32 tag; @@ -2040,7 +2017,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*in order to force CPU ordering*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2058,7 +2037,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2084,7 +2065,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2149,7 +2132,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2171,7 +2156,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2200,11 +2187,20 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } @@ -2212,7 +2208,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) { struct sas_task *t; - unsigned long flags; + unsigned long flags = 0; struct task_status_struct *ts; struct pm8001_ccb_info *ccb; struct pm8001_device *pm8001_dev; @@ -2292,7 +2288,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2401,11 +2399,20 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - mb();/* in order to force CPU ordering */ + mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } @@ -2876,15 +2883,20 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; - + port->port_state = portstate; PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SAS_PHY_UP \n")); + pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", + port_id, phy_id)); switch (deviceType) { case SAS_PHY_UNUSED: @@ -2895,16 +2907,19 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); pm8001_chip_phy_ctl_req(pm8001_ha, phy_id, PHY_NOTIFY_ENABLE_SPINUP); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_EDGE_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_FANOUT_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("fanout expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; default: @@ -2946,11 +2961,20 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," + " phy id = %d\n", port_id, phy_id)); + port->port_state = portstate; + port->port_attached = 1; get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; phy->phy_attached = 1; @@ -2984,7 +3008,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); u8 portstate = (u8)(npip_portstate & 0x0000000F); - + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + port->port_state = portstate; + phy->phy_type = 0; + phy->identify.device_type = 0; + phy->phy_attached = 0; + memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE); switch (portstate) { case PORT_VALID: break; @@ -2993,26 +3023,30 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk(" PortInvalid portID %d \n", port_id)); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; case PORT_IN_RESET: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" PortInReset portID %d \n", port_id)); + pm8001_printk(" Port In Reset portID %d \n", port_id)); break; case PORT_NOT_ESTABLISHED: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n")); + port->port_attached = 0; break; case PORT_LOSTCOMM: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_LOSTCOMM\n")); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; default: + port->port_attached = 0; PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and(default) = %x\n", portstate)); @@ -3770,7 +3804,8 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, u32 opc = OPC_INB_SSPINIIOSTART; memset(&ssp_cmd, 0, sizeof(ssp_cmd)); memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8); - ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for + ssp_cmd.dir_m_tlr = + cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for SAS 1.1 compatible TLR*/ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len); ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id); @@ -3841,7 +3876,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, } } if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) - ncg_tag = cpu_to_le32(hdr_tag); + ncg_tag = hdr_tag; dir = data_dir_flags[task->data_dir] << 8; sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); @@ -3986,7 +4021,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, ((stp_sspsmp_sata & 0x03) * 0x10000000)); payload.firstburstsize_ITNexustimeout = cpu_to_le32(ITNT | (firstBurstSize * 0x10000)); - memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr, + memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr, SAS_ADDR_SIZE); rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload); return rc; @@ -4027,7 +4062,7 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, struct inbound_queue_table *circularQ; int ret; u32 opc = OPC_INB_LOCAL_PHY_CONTROL; - memset((u8 *)&payload, 0, sizeof(payload)); + memset(&payload, 0, sizeof(payload)); circularQ = &pm8001_ha->inbnd_q_tbl[0]; payload.tag = 1; payload.phyop_phyid = diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 96e4daa68b8f..833a5201eda4 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -242,8 +242,7 @@ struct reg_dev_req { __le32 phyid_portid; __le32 dtype_dlr_retry; __le32 firstburstsize_ITNexustimeout; - u32 sas_addr_hi; - u32 sas_addr_low; + u8 sas_addr[SAS_ADDR_SIZE]; __le32 upper_device_id; u32 reserved[8]; } __attribute__((packed, aligned(4))); diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 42ebe725d5a5..c2f1032496cb 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -200,8 +200,13 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha) { int i; spin_lock_init(&pm8001_ha->lock); - for (i = 0; i < pm8001_ha->chip->n_phy; i++) + for (i = 0; i < pm8001_ha->chip->n_phy; i++) { pm8001_phy_init(pm8001_ha, i); + pm8001_ha->port[i].wide_port_phymap = 0; + pm8001_ha->port[i].port_attached = 0; + pm8001_ha->port[i].port_state = 0; + INIT_LIST_HEAD(&pm8001_ha->port[i].list); + } pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL); if (!pm8001_ha->tags) @@ -511,19 +516,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) u8 i; #ifdef PM8001_READ_VPD DECLARE_COMPLETION_ONSTACK(completion); + struct pm8001_ioctl_payload payload; pm8001_ha->nvmd_completion = &completion; - PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0); + payload.minor_function = 0; + payload.length = 128; + payload.func_specific = kzalloc(128, GFP_KERNEL); + PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); wait_for_completion(&completion); for (i = 0; i < pm8001_ha->chip->n_phy; i++) { memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr, SAS_ADDR_SIZE); PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("phy %d sas_addr = %x \n", i, - (u64)pm8001_ha->phy[i].dev_sas_addr)); + pm8001_printk("phy %d sas_addr = %016llx \n", i, + pm8001_ha->phy[i].dev_sas_addr)); } #else for (i = 0; i < pm8001_ha->chip->n_phy; i++) { - pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL; + pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL; pm8001_ha->phy[i].dev_sas_addr = cpu_to_be64((u64) (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr)); diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 1f767a0e727a..7f9c83a76390 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -329,6 +329,23 @@ int pm8001_slave_configure(struct scsi_device *sdev) } return 0; } + /* Find the local port id that's attached to this device */ +static int sas_find_local_port_id(struct domain_device *dev) +{ + struct domain_device *pdev = dev->parent; + + /* Directly attached device */ + if (!pdev) + return dev->port->id; + while (pdev) { + struct domain_device *pdev_p = pdev->parent; + if (!pdev_p) + return pdev->port->id; + pdev = pdev->parent; + } + return 0; +} + /** * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. * @task: the task to be execute. @@ -346,11 +363,12 @@ static int pm8001_task_exec(struct sas_task *task, const int num, struct domain_device *dev = task->dev; struct pm8001_hba_info *pm8001_ha; struct pm8001_device *pm8001_dev; + struct pm8001_port *port = NULL; struct sas_task *t = task; struct pm8001_ccb_info *ccb; u32 tag = 0xdeadbeef, rc, n_elem = 0; u32 n = num; - unsigned long flags = 0; + unsigned long flags = 0, flags_libsas = 0; if (!dev->port) { struct task_status_struct *tsm = &t->task_status; @@ -379,6 +397,35 @@ static int pm8001_task_exec(struct sas_task *task, const int num, rc = SAS_PHY_DOWN; goto out_done; } + port = &pm8001_ha->port[sas_find_local_port_id(dev)]; + if (!port->port_attached) { + if (sas_protocol_ata(t->task_proto)) { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irqrestore(dev->sata_dev.ap->lock, + flags_libsas); + t->task_done(t); + spin_lock_irqsave(dev->sata_dev.ap->lock, + flags_libsas); + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } else { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + t->task_done(t); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } + } rc = pm8001_tag_alloc(pm8001_ha, &tag); if (rc) goto err_out; @@ -569,11 +616,11 @@ static int pm8001_dev_found_notify(struct domain_device *dev) spin_lock_irqsave(&pm8001_ha->lock, flags); pm8001_device = pm8001_alloc_dev(pm8001_ha); - pm8001_device->sas_device = dev; if (!pm8001_device) { res = -1; goto found_out; } + pm8001_device->sas_device = dev; dev->lldd_dev = pm8001_device; pm8001_device->dev_type = dev->dev_type; pm8001_device->dcompletion = &completion; @@ -609,7 +656,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) wait_for_completion(&completion); if (dev->dev_type == SAS_END_DEV) msleep(50); - pm8001_ha->flags = PM8001F_RUN_TIME ; + pm8001_ha->flags |= PM8001F_RUN_TIME ; return 0; found_out: spin_unlock_irqrestore(&pm8001_ha->lock, flags); @@ -772,7 +819,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, task->task_done = pm8001_task_done; task->timer.data = (unsigned long)task; task->timer.function = pm8001_tmf_timedout; - task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; + task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; add_timer(&task->timer); res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); @@ -897,6 +944,8 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev) if (dev_is_sata(dev)) { DECLARE_COMPLETION_ONSTACK(completion_setstate); + if (scsi_is_sas_phy_local(phy)) + return 0; rc = sas_phy_reset(phy, 1); msleep(2000); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 30f2ede55a75..8e38ca8cd101 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -59,11 +59,11 @@ #define DRV_NAME "pm8001" #define DRV_VERSION "0.1.36" -#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */ +#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */ #define PM8001_INIT_LOGGING 0x02 /* driver init logging */ #define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */ #define PM8001_IO_LOGGING 0x08 /* I/O path logging */ -#define PM8001_EH_LOGGING 0x10 /* Error message logging */ +#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/ #define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */ #define PM8001_MSG_LOGGING 0x40 /* misc message logging */ #define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\ @@ -100,6 +100,7 @@ do { \ #define PM8001_USE_TASKLET #define PM8001_USE_MSIX +#define PM8001_READ_VPD #define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV)) @@ -111,7 +112,22 @@ extern const struct pm8001_dispatch pm8001_8001_dispatch; struct pm8001_hba_info; struct pm8001_ccb_info; struct pm8001_device; -struct pm8001_tmf_task; +/* define task management IU */ +struct pm8001_tmf_task { + u8 tmf; + u32 tag_of_task_to_be_managed; +}; +struct pm8001_ioctl_payload { + u32 signature; + u16 major_function; + u16 minor_function; + u16 length; + u16 status; + u16 offset; + u16 id; + u8 *func_specific; +}; + struct pm8001_dispatch { char *name; int (*chip_init)(struct pm8001_hba_info *pm8001_ha); @@ -164,6 +180,10 @@ struct pm8001_chip_info { struct pm8001_port { struct asd_sas_port sas_port; + u8 port_attached; + u8 wide_port_phymap; + u8 port_state; + struct list_head list; }; struct pm8001_phy { @@ -386,11 +406,7 @@ struct pm8001_fw_image_header { __be32 startup_entry; } __attribute__((packed, aligned(4))); -/* define task management IU */ -struct pm8001_tmf_task { - u8 tmf; - u32 tag_of_task_to_be_managed; -}; + /** * FW Flash Update status values */ diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 34c6b896a91b..e7d2688fbeba 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1,7 +1,8 @@ /* * pmcraid.c -- driver for PMC Sierra MaxRAID controller adapters * - * Written By: PMC Sierra Corporation + * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com> + * PMC-Sierra Inc * * Copyright (C) 2008, 2009 PMC Sierra Inc * @@ -79,7 +80,7 @@ DECLARE_BITMAP(pmcraid_minor, PMCRAID_MAX_ADAPTERS); /* * Module parameters */ -MODULE_AUTHOR("PMC Sierra Corporation, anil_ravindranath@pmc-sierra.com"); +MODULE_AUTHOR("Anil Ravindranath<anil_ravindranath@pmc-sierra.com>"); MODULE_DESCRIPTION("PMC Sierra MaxRAID Controller Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(PMCRAID_DRIVER_VERSION); @@ -162,10 +163,10 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev) spin_lock_irqsave(&pinstance->resource_lock, lock_flags); list_for_each_entry(temp, &pinstance->used_res_q, queue) { - /* do not expose VSETs with order-ids >= 240 */ + /* do not expose VSETs with order-ids > MAX_VSET_TARGETS */ if (RES_IS_VSET(temp->cfg_entry)) { target = temp->cfg_entry.unique_flags1; - if (target >= PMCRAID_MAX_VSET_TARGETS) + if (target > PMCRAID_MAX_VSET_TARGETS) continue; bus = PMCRAID_VSET_BUS_ID; lun = 0; @@ -1210,7 +1211,7 @@ static int pmcraid_expose_resource(struct pmcraid_config_table_entry *cfgte) int retval = 0; if (cfgte->resource_type == RES_TYPE_VSET) - retval = ((cfgte->unique_flags1 & 0xFF) < 0xFE); + retval = ((cfgte->unique_flags1 & 0x80) == 0); else if (cfgte->resource_type == RES_TYPE_GSCSI) retval = (RES_BUS(cfgte->resource_address) != PMCRAID_VIRTUAL_ENCL_BUS_ID); @@ -1361,6 +1362,7 @@ static int pmcraid_notify_aen(struct pmcraid_instance *pinstance, u8 type) * Return value: * none */ + static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) { struct pmcraid_config_table_entry *cfg_entry; @@ -1368,9 +1370,10 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) struct pmcraid_cmd *cmd; struct pmcraid_cmd *cfgcmd; struct pmcraid_resource_entry *res = NULL; - u32 new_entry = 1; unsigned long lock_flags; unsigned long host_lock_flags; + u32 new_entry = 1; + u32 hidden_entry = 0; int rc; ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam; @@ -1406,9 +1409,15 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) } /* If this resource is not going to be added to mid-layer, just notify - * applications and return + * applications and return. If this notification is about hiding a VSET + * resource, check if it was exposed already. */ - if (!pmcraid_expose_resource(cfg_entry)) + if (pinstance->ccn.hcam->notification_type == + NOTIFICATION_TYPE_ENTRY_CHANGED && + cfg_entry->resource_type == RES_TYPE_VSET && + cfg_entry->unique_flags1 & 0x80) { + hidden_entry = 1; + } else if (!pmcraid_expose_resource(cfg_entry)) goto out_notify_apps; spin_lock_irqsave(&pinstance->resource_lock, lock_flags); @@ -1424,6 +1433,12 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) if (new_entry) { + if (hidden_entry) { + spin_unlock_irqrestore(&pinstance->resource_lock, + lock_flags); + goto out_notify_apps; + } + /* If there are more number of resources than what driver can * manage, do not notify the applications about the CCN. Just * ignore this notifications and re-register the same HCAM @@ -1454,8 +1469,9 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) sizeof(struct pmcraid_config_table_entry)); if (pinstance->ccn.hcam->notification_type == - NOTIFICATION_TYPE_ENTRY_DELETED) { + NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) { if (res->scsi_dev) { + res->cfg_entry.unique_flags1 &= 0x7F; res->change_detected = RES_CHANGE_DEL; res->cfg_entry.resource_handle = PMCRAID_INVALID_RES_HANDLE; diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 2752b56cad56..92f89d50850c 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -1,6 +1,9 @@ /* * pmcraid.h -- PMC Sierra MaxRAID controller driver header file * + * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com> + * PMC-Sierra Inc + * * Copyright (C) 2008, 2009 PMC Sierra Inc. * * This program is free software; you can redistribute it and/or modify @@ -106,7 +109,7 @@ #define PMCRAID_VSET_LUN_ID 0x0 #define PMCRAID_PHYS_BUS_ID 0x0 #define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8 -#define PMCRAID_MAX_VSET_TARGETS 240 +#define PMCRAID_MAX_VSET_TARGETS 0x7F #define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8 #define PMCRAID_IOA_MAX_SECTORS 32767 diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6b9bf23c7735..384afda7dbe9 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1570,9 +1570,6 @@ typedef struct fc_port { struct fc_rport *rport, *drport; u32 supported_classes; - unsigned long last_queue_full; - unsigned long last_ramp_up; - uint16_t vp_idx; } fc_port_t; @@ -2265,6 +2262,7 @@ struct qla_hw_data { uint32_t port0 :1; uint32_t running_gold_fw :1; uint32_t cpu_affinity_enabled :1; + uint32_t disable_msix_handshake :1; } flags; /* This spinlock is used to protect "io transactions", you must @@ -2387,6 +2385,7 @@ struct qla_hw_data { #define IS_QLA81XX(ha) (IS_QLA8001(ha)) #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ IS_QLA25XX(ha) || IS_QLA81XX(ha)) +#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha)) #define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ (ha)->flags.msix_enabled) #define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha)) diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index e21851358509..0b6801fc6389 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,8 +72,6 @@ extern int ql2xloginretrycount; extern int ql2xfdmienable; extern int ql2xallocfwdump; extern int ql2xextended_error_logging; -extern int ql2xqfullrampup; -extern int ql2xqfulltracking; extern int ql2xiidmaenable; extern int ql2xmaxqueues; extern int ql2xmultique_tag; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b74924b279ef..73a793539d45 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1442,7 +1442,17 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); + /* Use Disable MSIX Handshake mode for capable adapters */ + if (IS_MSIX_NACK_CAPABLE(ha)) { + icb->firmware_options_2 &= + __constant_cpu_to_le32(~BIT_22); + ha->flags.disable_msix_handshake = 1; + qla_printk(KERN_INFO, ha, + "MSIX Handshake Disable Mode turned on\n"); + } else { + icb->firmware_options_2 |= + __constant_cpu_to_le32(BIT_22); + } icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); WRT_REG_DWORD(®->isp25mq.req_q_in, 0); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 804987397b77..1692a883f4de 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -811,78 +811,6 @@ skip_rio: qla2x00_alert_all_vps(rsp, mb); } -static void -qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - struct scsi_qla_host *vha = fcport->vha; - struct qla_hw_data *ha = vha->hw; - struct req_que *req = NULL; - - if (!ql2xqfulltracking) - return; - - req = vha->req; - if (!req) - return; - if (req->max_q_depth <= sdev->queue_depth) - return; - - if (sdev->ordered_tags) - scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, - sdev->queue_depth + 1); - else - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, - sdev->queue_depth + 1); - - fcport->last_ramp_up = jiffies; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static void -qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - - if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1)) - return; - - DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static inline void -qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req, - srb_t *sp) -{ - fc_port_t *fcport; - struct scsi_device *sdev; - - if (!ql2xqfulltracking) - return; - - sdev = sp->cmd->device; - if (sdev->queue_depth >= req->max_q_depth) - return; - - fcport = sp->fcport; - if (time_before(jiffies, - fcport->last_ramp_up + ql2xqfullrampup * HZ)) - return; - if (time_before(jiffies, - fcport->last_queue_full + ql2xqfullrampup * HZ)) - return; - - starget_for_each_device(sdev->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_up); -} - /** * qla2x00_process_completed_request() - Process a Fast Post response. * @ha: SCSI driver HA context @@ -913,8 +841,6 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, /* Save ISP completion status */ sp->cmd->result = DID_OK << 16; - - qla2x00_ramp_up_queue_depth(vha, req, sp); qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion" @@ -1435,13 +1361,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* Adjust queue depth for all luns on the port. */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device(cp->device->sdev_target, - fcport, qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -1516,17 +1435,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* - * Adjust queue depth for all luns on the - * port. - */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device( - cp->device->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -2020,7 +1928,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); - if (!ha->mqenable) { + if (!ha->flags.disable_msix_handshake) { WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); } @@ -2034,6 +1942,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) { struct qla_hw_data *ha; struct rsp_que *rsp; + struct device_reg_24xx __iomem *reg; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -2043,6 +1952,14 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) } ha = rsp->hw; + /* Clear the interrupt, if enabled, for this response queue */ + if (rsp->options & ~BIT_6) { + reg = &ha->iobase->isp24; + spin_lock_irq(&ha->hardware_lock); + WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); + RD_REG_DWORD_RELAXED(®->hccr); + spin_unlock_irq(&ha->hardware_lock); + } queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index a47d34308a3a..2a4c7f4e7b69 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -696,6 +696,10 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, /* Use alternate PCI devfn */ if (LSB(rsp->rid)) options |= BIT_5; + /* Enable MSIX handshake mode on for uncapable adapters */ + if (!IS_MSIX_NACK_CAPABLE(ha)) + options |= BIT_6; + rsp->options = options; rsp->id = que_id; reg = ISP_QUE_REG(ha, que_id); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 41669357b186..2f873d237325 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -78,21 +78,6 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); -int ql2xqfulltracking = 1; -module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfulltracking, - "Controls whether the driver tracks queue full status " - "returns and dynamically adjusts a scsi device's queue " - "depth. Default is 1, perform tracking. Set to 0 to " - "disable dynamic tracking and adjustment of queue depth."); - -int ql2xqfullrampup = 120; -module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfullrampup, - "Number of seconds to wait to begin to ramp-up the queue " - "depth for a device after a queue-full condition has been " - "detected. Default is 120 seconds."); - int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xiidmaenable, @@ -1217,13 +1202,61 @@ qla2xxx_slave_destroy(struct scsi_device *sdev) sdev->hostdata = NULL; } +static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = (struct fc_port *) sdev->hostdata; + + if (!scsi_track_queue_full(sdev, qdepth)) + return; + + DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + +static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = sdev->hostdata; + struct scsi_qla_host *vha = fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = NULL; + + req = vha->req; + if (!req) + return; + + if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth) + return; + + if (sdev->ordered_tags) + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth); + else + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth); + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + static int qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) { - if (reason != SCSI_QDEPTH_DEFAULT) - return -EOPNOTSUPP; + switch (reason) { + case SCSI_QDEPTH_DEFAULT: + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + break; + case SCSI_QDEPTH_QFULL: + qla2x00_handle_queue_full(sdev, qdepth); + break; + case SCSI_QDEPTH_RAMP_UP: + qla2x00_adjust_sdev_qdepth_up(sdev, qdepth); + break; + default: + return EOPNOTSUPP; + } - scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); return sdev->queue_depth; } @@ -2003,13 +2036,13 @@ skip_dpc: DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", base_vha->host_no, ha)); - base_vha->flags.init_done = 1; - base_vha->flags.online = 1; - ret = scsi_add_host(host, &pdev->dev); if (ret) goto probe_failed; + base_vha->flags.init_done = 1; + base_vha->flags.online = 1; + ha->isp_ops->enable_intrs(ha); scsi_scan_host(host); diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 807e0dbc67fa..c482220f7eed 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k7" +#define QLA2XXX_VERSION "8.03.01-k8" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e495d3813948..d8927681ec88 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -859,6 +859,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) case 0x07: /* operation in progress */ case 0x08: /* Long write in progress */ case 0x09: /* self test in progress */ + case 0x14: /* space allocation in progress */ action = ACTION_DELAYED_RETRY; break; default: diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6531c91501be..ddfcecd5099f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -649,11 +649,22 @@ static __init int fc_transport_init(void) return error; error = transport_class_register(&fc_vport_class); if (error) - return error; + goto unreg_host_class; error = transport_class_register(&fc_rport_class); if (error) - return error; - return transport_class_register(&fc_transport_class); + goto unreg_vport_class; + error = transport_class_register(&fc_transport_class); + if (error) + goto unreg_rport_class; + return 0; + +unreg_rport_class: + transport_class_unregister(&fc_rport_class); +unreg_vport_class: + transport_class_unregister(&fc_vport_class); +unreg_host_class: + transport_class_unregister(&fc_host_class); + return error; } static void __exit fc_transport_exit(void) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 9093c7261f33..255da53e5a01 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -264,6 +264,15 @@ sd_show_app_tag_own(struct device *dev, struct device_attribute *attr, return snprintf(buf, 20, "%u\n", sdkp->ATO); } +static ssize_t +sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->thin_provisioning); +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -274,6 +283,7 @@ static struct device_attribute sd_disk_attrs[] = { sd_store_manage_start_stop), __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL), __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL), + __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR_NULL, }; @@ -399,6 +409,57 @@ static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif) } /** + * sd_prepare_discard - unmap blocks on thinly provisioned device + * @rq: Request to prepare + * + * Will issue either UNMAP or WRITE SAME(16) depending on preference + * indicated by target device. + **/ +static int sd_prepare_discard(struct request *rq) +{ + struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); + struct bio *bio = rq->bio; + sector_t sector = bio->bi_sector; + unsigned int num = bio_sectors(bio); + + if (sdkp->device->sector_size == 4096) { + sector >>= 3; + num >>= 3; + } + + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->timeout = SD_TIMEOUT; + + memset(rq->cmd, 0, rq->cmd_len); + + if (sdkp->unmap) { + char *buf = kmap_atomic(bio_page(bio), KM_USER0); + + rq->cmd[0] = UNMAP; + rq->cmd[8] = 24; + rq->cmd_len = 10; + + /* Ensure that data length matches payload */ + rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24; + + put_unaligned_be16(6 + 16, &buf[0]); + put_unaligned_be16(16, &buf[2]); + put_unaligned_be64(sector, &buf[8]); + put_unaligned_be32(num, &buf[16]); + + kunmap_atomic(buf, KM_USER0); + } else { + rq->cmd[0] = WRITE_SAME_16; + rq->cmd[1] = 0x8; /* UNMAP */ + put_unaligned_be64(sector, &rq->cmd[2]); + put_unaligned_be32(num, &rq->cmd[10]); + rq->cmd_len = 16; + } + + return BLKPREP_OK; +} + +/** * sd_init_command - build a scsi (read or write) command from * information in the request structure. * @SCpnt: pointer to mid-level's per scsi command structure that @@ -418,6 +479,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) int ret, host_dif; unsigned char protect; + /* + * Discard request come in as REQ_TYPE_FS but we turn them into + * block PC requests to make life easier. + */ + if (blk_discard_rq(rq)) + ret = sd_prepare_discard(rq); + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { ret = scsi_setup_blk_pc_cmnd(sdp, rq); goto out; @@ -1432,6 +1500,19 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, sd_printk(KERN_NOTICE, sdkp, "physical block alignment offset: %u\n", alignment); + if (buffer[14] & 0x80) { /* TPE */ + struct request_queue *q = sdp->request_queue; + + sdkp->thin_provisioning = 1; + q->limits.discard_granularity = sdkp->hw_sector_size; + q->limits.max_discard_sectors = 0xffffffff; + + if (buffer[14] & 0x40) /* TPRZ */ + q->limits.discard_zeroes_data = 1; + + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); + } + sdkp->capacity = lba + 1; return sector_size; } @@ -1863,6 +1944,7 @@ void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) */ static void sd_read_block_limits(struct scsi_disk *sdkp) { + struct request_queue *q = sdkp->disk->queue; unsigned int sector_sz = sdkp->device->sector_size; char *buffer; @@ -1877,6 +1959,31 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) blk_queue_io_opt(sdkp->disk->queue, get_unaligned_be32(&buffer[12]) * sector_sz); + /* Thin provisioning enabled and page length indicates TP support */ + if (sdkp->thin_provisioning && buffer[3] == 0x3c) { + unsigned int lba_count, desc_count, granularity; + + lba_count = get_unaligned_be32(&buffer[20]); + desc_count = get_unaligned_be32(&buffer[24]); + + if (lba_count) { + q->limits.max_discard_sectors = + lba_count * sector_sz >> 9; + + if (desc_count) + sdkp->unmap = 1; + } + + granularity = get_unaligned_be32(&buffer[28]); + + if (granularity) + q->limits.discard_granularity = granularity * sector_sz; + + if (buffer[32] & 0x80) + q->limits.discard_alignment = + get_unaligned_be32(&buffer[32]) & ~(1 << 31); + } + kfree(buffer); } diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index e374804d26fb..43d3caf268ef 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -60,6 +60,8 @@ struct scsi_disk { unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ unsigned first_scan : 1; + unsigned thin_provisioning : 1; + unsigned unmap : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index ad59abb47722..d04ea9a6f673 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -552,13 +552,15 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd SRpnt->waiting = waiting; if (STp->buffer->do_dio) { + mdata->page_order = 0; mdata->nr_entries = STp->buffer->sg_segs; mdata->pages = STp->buffer->mapped_pages; } else { + mdata->page_order = STp->buffer->reserved_page_order; mdata->nr_entries = DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order); - STp->buffer->map_data.pages = STp->buffer->reserved_pages; - STp->buffer->map_data.offset = 0; + mdata->pages = STp->buffer->reserved_pages; + mdata->offset = 0; } memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); @@ -3719,7 +3721,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm priority |= __GFP_ZERO; if (STbuffer->frp_segs) { - order = STbuffer->map_data.page_order; + order = STbuffer->reserved_page_order; b_size = PAGE_SIZE << order; } else { for (b_size = PAGE_SIZE, order = 0; @@ -3752,7 +3754,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm segs++; } STbuffer->b_data = page_address(STbuffer->reserved_pages[0]); - STbuffer->map_data.page_order = order; + STbuffer->reserved_page_order = order; return 1; } @@ -3765,7 +3767,7 @@ static void clear_buffer(struct st_buffer * st_bp) for (i=0; i < st_bp->frp_segs; i++) memset(page_address(st_bp->reserved_pages[i]), 0, - PAGE_SIZE << st_bp->map_data.page_order); + PAGE_SIZE << st_bp->reserved_page_order); st_bp->cleared = 1; } @@ -3773,7 +3775,7 @@ static void clear_buffer(struct st_buffer * st_bp) /* Release the extra buffer */ static void normalize_buffer(struct st_buffer * STbuffer) { - int i, order = STbuffer->map_data.page_order; + int i, order = STbuffer->reserved_page_order; for (i = 0; i < STbuffer->frp_segs; i++) { __free_pages(STbuffer->reserved_pages[i], order); @@ -3781,7 +3783,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) } STbuffer->frp_segs = 0; STbuffer->sg_segs = 0; - STbuffer->map_data.page_order = 0; + STbuffer->reserved_page_order = 0; STbuffer->map_data.offset = 0; } @@ -3791,7 +3793,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->buffer_bytes; i < st_bp->frp_segs && offset >= length; i++) @@ -3823,7 +3825,7 @@ static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, in static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->read_pointer; i < st_bp->frp_segs && offset >= length; i++) @@ -3856,7 +3858,7 @@ static void move_buffer_data(struct st_buffer * st_bp, int offset) { int src_seg, dst_seg, src_offset = 0, dst_offset; int count, total; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; if (offset == 0) return; @@ -4578,7 +4580,6 @@ static int sgl_map_user_pages(struct st_buffer *STbp, } mdata->offset = uaddr & ~PAGE_MASK; - mdata->page_order = 0; STbp->mapped_pages = pages; return nr_pages; diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 544dc6b1f548..f91a67c6d968 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -46,6 +46,7 @@ struct st_buffer { struct st_request *last_SRpnt; struct st_cmdstatus cmdstat; struct page **reserved_pages; + int reserved_page_order; struct page **mapped_pages; struct rq_map_data map_data; unsigned char *b_data; |