Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 0 insertions, 176 deletions

diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index d006a8cb4a74..7236143941f3 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -74,15 +74,6 @@ config SCSI_CUMANA_1
 	  This enables support for the Cumana SCSI I card. If you have an
 	  Acorn system with one of these, say Y. If unsure, say N.
 
-config SCSI_ECOSCSI
-	tristate "EcoScsi support (EXPERIMENTAL)"
-	depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
-	select SCSI_SPI_ATTRS
-	help
-	  This enables support for the EcoSCSI card -- a small card that sits
-	  in the Econet socket. If you have an Acorn system with one of these,
-	  say Y. If unsure, say N.
-
 config SCSI_OAK1
 	tristate "Oak SCSI support (EXPERIMENTAL)"
 	depends on ARCH_ACORN && EXPERIMENTAL && SCSI
diff --git a/drivers/scsi/arm/Makefile b/drivers/scsi/arm/Makefile
index e8db17924c1d..16c3e86a6b1b 100644
--- a/drivers/scsi/arm/Makefile
+++ b/drivers/scsi/arm/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_SCSI_ACORNSCSI_3)	+= acornscsi_mod.o queue.o msgqueue.o
 obj-$(CONFIG_SCSI_ARXESCSI)	+= arxescsi.o fas216.o queue.o msgqueue.o
 obj-$(CONFIG_SCSI_CUMANA_1)	+= cumana_1.o
 obj-$(CONFIG_SCSI_CUMANA_2)	+= cumana_2.o fas216.o queue.o msgqueue.o
-obj-$(CONFIG_SCSI_ECOSCSI)	+= ecoscsi.o
 obj-$(CONFIG_SCSI_OAK1)		+= oak.o
 obj-$(CONFIG_SCSI_POWERTECSCSI)	+= powertec.o fas216.o queue.o msgqueue.o
 obj-$(CONFIG_SCSI_EESOXSCSI)	+= eesox.o fas216.o queue.o msgqueue.o
diff --git a/drivers/scsi/arm/ecoscsi.c b/drivers/scsi/arm/ecoscsi.c
deleted file mode 100644
index 5265a9884338..000000000000
--- a/drivers/scsi/arm/ecoscsi.c
+++ /dev/null
@@ -1,166 +0,0 @@
-#define AUTOSENSE
-/* #define PSEUDO_DMA */
-
-/*
- * EcoSCSI Generic NCR5380 driver
- *
- * Copyright 1995, Russell King
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "../scsi.h"
-#include <scsi/scsi_host.h>
-
-#define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
-
-#define NCR5380_local_declare()		void __iomem *_base
-#define NCR5380_setup(host)		_base = priv(host)->base
-
-#define NCR5380_read(reg)		({ writeb(reg | 8, _base); readb(_base + 4); })
-#define NCR5380_write(reg, value)	({ writeb(reg | 8, _base); writeb(value, _base + 4); })
-
-#define NCR5380_intr			ecoscsi_intr
-#define NCR5380_queue_command		ecoscsi_queue_command
-#define NCR5380_proc_info		ecoscsi_proc_info
-
-#define NCR5380_implementation_fields	\
-	void __iomem *base
-
-#include "../NCR5380.h"
-
-#define ECOSCSI_PUBLIC_RELEASE 1
-
-/*
- * Function : ecoscsi_setup(char *str, int *ints)
- *
- * Purpose : LILO command line initialization of the overrides array,
- *
- * Inputs : str - unused, ints - array of integer parameters with ints[0]
- *	equal to the number of ints.
- *
- */
-
-void ecoscsi_setup(char *str, int *ints)
-{
-}
-
-const char * ecoscsi_info (struct Scsi_Host *spnt)
-{
-	return "";
-}
-
-#define BOARD_NORMAL	0
-#define BOARD_NCR53C400	1
-
-#include "../NCR5380.c"
-
-static struct scsi_host_template ecoscsi_template =  {
-	.module		= THIS_MODULE,
-	.name		= "Serial Port EcoSCSI NCR5380",
-	.proc_name	= "ecoscsi",
-	.info		= ecoscsi_info,
-	.queuecommand	= ecoscsi_queue_command,
-	.eh_abort_handler	= NCR5380_abort,
-	.eh_bus_reset_handler	= NCR5380_bus_reset,
-	.can_queue	= 16,
-	.this_id	= 7,
-	.sg_tablesize	= SG_ALL,
-	.cmd_per_lun	= 2,
-	.use_clustering	= DISABLE_CLUSTERING
-};
-
-static struct Scsi_Host *host;
-
-static int __init ecoscsi_init(void)
-{
-	void __iomem *_base;
-	int ret;
-
-	if (!request_mem_region(0x33a0000, 4096, "ecoscsi")) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	_base = ioremap(0x33a0000, 4096);
-	if (!_base) {
-		ret = -ENOMEM;
-		goto out_release;
-	}
-
-	NCR5380_write(MODE_REG, 0x20);		/* Is it really SCSI? */
-	if (NCR5380_read(MODE_REG) != 0x20)	/* Write to a reg.    */
-		goto out_unmap;
-
-	NCR5380_write(MODE_REG, 0x00);		/* it back.	      */
-	if (NCR5380_read(MODE_REG) != 0x00)
-		goto out_unmap;
-
-	host = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata));
-	if (!host) {
-		ret = -ENOMEM;
-		goto out_unmap;
-	}
-
-	priv(host)->base = _base;
-	host->irq = IRQ_NONE;
-
-	NCR5380_init(host, 0);
-
-	printk("scsi%d: at port 0x%08lx irqs disabled", host->host_no, host->io_port);
-	printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
-		host->can_queue, host->cmd_per_lun, ECOSCSI_PUBLIC_RELEASE);
-	printk("\nscsi%d:", host->host_no);
-	NCR5380_print_options(host);
-	printk("\n");
-
-	scsi_add_host(host, NULL); /* XXX handle failure */
-	scsi_scan_host(host);
-	return 0;
-
- out_unmap:
-	iounmap(_base);
- out_release:
-	release_mem_region(0x33a0000, 4096);
- out:
-	return ret;
-}
-
-static void __exit ecoscsi_exit(void)
-{
-	scsi_remove_host(host);
-	NCR5380_exit(host);
-	scsi_host_put(host);
-	release_mem_region(0x33a0000, 4096);
-	return 0;
-}
-
-module_init(ecoscsi_init);
-module_exit(ecoscsi_exit);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("Econet-SCSI driver for Acorn machines");
-MODULE_LICENSE("GPL");
-