tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 1598 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
deleted file mode 100644
index c1df7676a73d..000000000000
--- a/drivers/serial/Kconfig
+++ /dev/null
@@ -1,1598 +0,0 @@
-#
-# Serial device configuration
-#
-
-menu "Serial drivers"
-	depends on HAS_IOMEM
-
-#
-# The new 8250/16550 serial drivers
-config SERIAL_8250
-	tristate "8250/16550 and compatible serial support"
-	select SERIAL_CORE
-	---help---
-	  This selects whether you want to include the driver for the standard
-	  serial ports.  The standard answer is Y.  People who might say N
-	  here are those that are setting up dedicated Ethernet WWW/FTP
-	  servers, or users that have one of the various bus mice instead of a
-	  serial mouse and don't intend to use their machine's standard serial
-	  port for anything.  (Note that the Cyclades and Stallion multi
-	  serial port drivers do not need this driver built in for them to
-	  work.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 8250.
-	  [WARNING: Do not compile this driver as a module if you are using
-	  non-standard serial ports, since the configuration information will
-	  be lost when the driver is unloaded.  This limitation may be lifted
-	  in the future.]
-
-	  BTW1: If you have a mouseman serial mouse which is not recognized by
-	  the X window system, try running gpm first.
-
-	  BTW2: If you intend to use a software modem (also called Winmodem)
-	  under Linux, forget it.  These modems are crippled and require
-	  proprietary drivers which are only available under Windows.
-
-	  Most people will say Y or M here, so that they can use serial mice,
-	  modems and similar devices connecting to the standard serial ports.
-
-config SERIAL_8250_CONSOLE
-	bool "Console on 8250/16550 and compatible serial port"
-	depends on SERIAL_8250=y
-	select SERIAL_CORE_CONSOLE
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (grub or lilo or loadlin) about how to pass options
-	  to the kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  You can set that using a kernel command line option such as
-	  "console=uart8250,io,0x3f8,9600n8"
-	  "console=uart8250,mmio,0xff5e0000,115200n8".
-	  and it will switch to normal serial console when the corresponding 
-	  port is ready.
-	  "earlycon=uart8250,io,0x3f8,9600n8"
-	  "earlycon=uart8250,mmio,0xff5e0000,115200n8".
-	  it will not only setup early console.
-
-	  If unsure, say N.
-
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
-config SERIAL_8250_GSC
-	tristate
-	depends on SERIAL_8250 && GSC
-	default SERIAL_8250
-
-config SERIAL_8250_PCI
-	tristate "8250/16550 PCI device support" if EMBEDDED
-	depends on SERIAL_8250 && PCI
-	default SERIAL_8250
-	help
-	  This builds standard PCI serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-	  Saves about 9K.
-
-config SERIAL_8250_PNP
-	tristate "8250/16550 PNP device support" if EMBEDDED
-	depends on SERIAL_8250 && PNP
-	default SERIAL_8250
-	help
-	  This builds standard PNP serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-
-config SERIAL_8250_HP300
-	tristate
-	depends on SERIAL_8250 && HP300
-	default SERIAL_8250
-
-config SERIAL_8250_CS
-	tristate "8250/16550 PCMCIA device support"
-	depends on PCMCIA && SERIAL_8250
-	---help---
-	  Say Y here to enable support for 16-bit PCMCIA serial devices,
-	  including serial port cards, modems, and the modem functions of
-	  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
-	  credit-card size devices often used with laptops.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called serial_cs.
-
-	  If unsure, say N.
-
-config SERIAL_8250_NR_UARTS
-	int "Maximum number of 8250/16550 serial ports"
-	depends on SERIAL_8250
-	default "4"
-	help
-	  Set this to the number of serial ports you want the driver
-	  to support.  This includes any ports discovered via ACPI or
-	  PCI enumeration and any ports that may be added at run-time
-	  via hot-plug, or any ISA multi-port serial cards.
-
-config SERIAL_8250_RUNTIME_UARTS
-	int "Number of 8250/16550 serial ports to register at runtime"
-	depends on SERIAL_8250
-	range 0 SERIAL_8250_NR_UARTS
-	default "4"
-	help
-	  Set this to the maximum number of serial ports you want
-	  the kernel to register at boot time.  This can be overridden
-	  with the module parameter "nr_uarts", or boot-time parameter
-	  8250.nr_uarts
-
-config SERIAL_8250_EXTENDED
-	bool "Extended 8250/16550 serial driver options"
-	depends on SERIAL_8250
-	help
-	  If you wish to use any non-standard features of the standard "dumb"
-	  driver, say Y here. This includes HUB6 support, shared serial
-	  interrupts, special multiport support, support for more than the
-	  four COM 1/2/3/4 boards, etc.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial driver options. If unsure, say N.
-
-config SERIAL_8250_MANY_PORTS
-	bool "Support more than 4 legacy serial ports"
-	depends on SERIAL_8250_EXTENDED && !IA64
-	help
-	  Say Y here if you have dumb serial boards other than the four
-	  standard COM 1/2/3/4 ports. This may happen if you have an AST
-	  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>), or other custom
-	  serial port hardware which acts similar to standard serial port
-	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
-	  say N here to save some memory. You can also say Y if you have an
-	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
-
-#
-# Multi-port serial cards
-#
-
-config SERIAL_8250_FOURPORT
-	tristate "Support Fourport cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an AST FourPort serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_fourport.
-
-config SERIAL_8250_ACCENT
-	tristate "Support Accent cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an Accent Async serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_accent.
-
-config SERIAL_8250_BOCA
-	tristate "Support Boca cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a Boca serial board.  Please read the Boca
-	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_boca.
-
-config SERIAL_8250_EXAR_ST16C554
-	tristate "Support Exar ST16C554/554D Quad UART"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
-	  tinkering with your Envoy TU301, or have a machine with this UART,
-	  say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_exar_st16c554.
-
-config SERIAL_8250_HUB6
-	tristate "Support Hub6 cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a HUB6 serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_hub6.
-
-config SERIAL_8250_SHARE_IRQ
-	bool "Support for sharing serial interrupts"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some serial boards have hardware support which allows multiple dumb
-	  serial ports on the same board to share a single IRQ. To enable
-	  support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
-	bool "Autodetect IRQ on standard ports (unsafe)"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Say Y here if you want the kernel to try to guess which IRQ
-	  to use for your serial port.
-
-	  This is considered unsafe; it is far better to configure the IRQ in
-	  a boot script using the setserial command.
-
-	  If unsure, say N.
-
-config SERIAL_8250_RSA
-	bool "Support RSA serial ports"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  ::: To be written :::
-
-config SERIAL_8250_MCA
-	tristate "Support 8250-type ports on MCA buses"
-	depends on SERIAL_8250 != n && MCA
-	help
-	  Say Y here if you have a MCA serial ports.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_mca.
-
-config SERIAL_8250_ACORN
-	tristate "Acorn expansion card serial port support"
-	depends on ARCH_ACORN && SERIAL_8250
-	help
-	  If you have an Atomwide Serial card or Serial Port card for an Acorn
-	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
-	  cards.  If unsure, say N.
-
-config SERIAL_8250_RM9K
-	bool "Support for MIPS RM9xxx integrated serial port"
-	depends on SERIAL_8250 != n && SERIAL_RM9000
-	select SERIAL_8250_SHARE_IRQ
-	help
-	  Selecting this option will add support for the integrated serial
-	  port hardware found on MIPS RM9122 and similar processors.
-	  If unsure, say N.
-
-comment "Non-8250 serial port support"
-
-config SERIAL_AMBA_PL010
-	tristate "ARM AMBA PL010 serial port support"
-	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
-	select SERIAL_CORE
-	help
-	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-	  an Integrator/AP or Integrator/PP2 platform, or if you have a
-	  Cirrus Logic EP93xx CPU, say Y or M here.
-
-	  If unsure, say N.
-
-config SERIAL_AMBA_PL010_CONSOLE
-	bool "Support for console on AMBA serial port"
-	depends on SERIAL_AMBA_PL010=y
-	select SERIAL_CORE_CONSOLE
-	---help---
-	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
-	  console (the system console is the device which receives all kernel
-	  messages and warnings and which allows logins in single user mode).
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyAM0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_AMBA_PL011
-	tristate "ARM AMBA PL011 serial port support"
-	depends on ARM_AMBA
-	select SERIAL_CORE
-	help
-	  This selects the ARM(R) AMBA(R) PrimeCell PL011 UART.  If you have
-	  an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
-	  here.
-
-	  If unsure, say N.
-
-config SERIAL_AMBA_PL011_CONSOLE
-	bool "Support for console on AMBA serial port"
-	depends on SERIAL_AMBA_PL011=y
-	select SERIAL_CORE_CONSOLE
-	---help---
-	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
-	  console (the system console is the device which receives all kernel
-	  messages and warnings and which allows logins in single user mode).
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyAMA0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_SB1250_DUART
-	tristate "BCM1xxx on-chip DUART serial support"
-	depends on SIBYTE_SB1xxx_SOC=y
-	select SERIAL_CORE
-	default y
-	---help---
-	  Support for the asynchronous serial interface (DUART) included in
-	  the BCM1250 and derived System-On-a-Chip (SOC) devices.  Note that
-	  the letter D in DUART stands for "dual", which is how the device
-	  is implemented.  Depending on the SOC configuration there may be
-	  one or more DUARTs available of which all are handled.
-
-	  If unsure, say Y.  To compile this driver as a module, choose M here:
-	  the module will be called sb1250-duart.
-
-config SERIAL_SB1250_DUART_CONSOLE
-	bool "Support for console on a BCM1xxx DUART serial port"
-	depends on SERIAL_SB1250_DUART=y
-	select SERIAL_CORE_CONSOLE
-	default y
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode).
-
-	  If unsure, say Y.
-
-config SERIAL_ATMEL
-	bool "AT91 / AT32 on-chip serial port support"
-	depends on (ARM && ARCH_AT91) || AVR32
-	select SERIAL_CORE
-	help
-	  This enables the driver for the on-chip UARTs of the Atmel
-	  AT91 and AT32 processors.
-
-config SERIAL_ATMEL_CONSOLE
-	bool "Support for console on AT91 / AT32 serial port"
-	depends on SERIAL_ATMEL=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use an on-chip UART on a Atmel
-	  AT91 or AT32 processor as the system console (the system
-	  console is the device which receives all kernel messages and
-	  warnings and which allows logins in single user mode).
-
-config SERIAL_ATMEL_PDC
-	bool "Support DMA transfers on AT91 / AT32 serial port"
-	depends on SERIAL_ATMEL
-	default y
-	help
-	  Say Y here if you wish to use the PDC to do DMA transfers to
-	  and from the Atmel AT91 / AT32 serial port. In order to
-	  actually use DMA transfers, make sure that the use_dma_tx
-	  and use_dma_rx members in the atmel_uart_data struct is set
-	  appropriately for each port.
-
-	  Note that break and error handling currently doesn't work
-	  properly when DMA is enabled. Make sure that ports where
-	  this matters don't use DMA.
-
-config SERIAL_ATMEL_TTYAT
-	bool "Install as device ttyATn instead of ttySn"
-	depends on SERIAL_ATMEL=y
-	help
-	  Say Y here if you wish to have the internal AT91 / AT32 UARTs
-	  appear as /dev/ttyATn (major 204, minor starting at 154)
-	  instead of the normal /dev/ttySn (major 4, minor starting at
-	  64). This is necessary if you also want other UARTs, such as
-	  external 8250/16C550 compatible UARTs.
-	  The ttySn nodes are legally reserved for the 8250 serial driver
-	  but are often misused by other serial drivers.
-
-	  To use this, you should create suitable ttyATn device nodes in
-	  /dev/, and pass "console=ttyATn" to the kernel.
-
-	  Say Y if you have an external 8250/16C550 UART.  If unsure, say N.
-
-config SERIAL_KS8695
-	bool "Micrel KS8695 (Centaur) serial port support"
-	depends on ARCH_KS8695
-	select SERIAL_CORE
-	help
-	  This selects the Micrel Centaur KS8695 UART.  Say Y here.
-
-config SERIAL_KS8695_CONSOLE
-	bool "Support for console on KS8695 (Centaur) serial port"
-	depends on SERIAL_KS8695=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use a KS8695 (Centaur) UART as the
-	  system console (the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode).
-
-config SERIAL_CLPS711X
-	tristate "CLPS711X serial port support"
-	depends on ARM && ARCH_CLPS711X
-	select SERIAL_CORE
-	help
-	  ::: To be written :::
-
-config SERIAL_CLPS711X_CONSOLE
-	bool "Support for console on CLPS711X serial port"
-	depends on SERIAL_CLPS711X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyCL1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_SAMSUNG
-	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_SAMSUNG
-	select SERIAL_CORE
-	help
-	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
-	  provide all of these ports, depending on how the serial port
-	  pins are configured.
-
-config SERIAL_SAMSUNG_UARTS_4
-	bool
-	depends on ARM && PLAT_SAMSUNG
-	default y if CPU_S3C2443
-	help
-	  Internal node for the common case of 4 Samsung compatible UARTs
-
-config SERIAL_SAMSUNG_UARTS
-	int
-	depends on ARM && PLAT_SAMSUNG
-	default 2 if ARCH_S3C2400
-	default 6 if ARCH_S5P6450
-	default 4 if SERIAL_SAMSUNG_UARTS_4
-	default 3
-	help
-	  Select the number of available UART ports for the Samsung S3C
-	  serial driver
-	
-config SERIAL_SAMSUNG_DEBUG
-	bool "Samsung SoC serial debug"
-	depends on SERIAL_SAMSUNG && DEBUG_LL
-	help
-	  Add support for debugging the serial driver. Since this is
-	  generally being used as a console, we use our own output
-	  routines that go via the low-level debug printascii()
-	  function.
-
-config SERIAL_SAMSUNG_CONSOLE
-	bool "Support for console on Samsung SoC serial port"
-	depends on SERIAL_SAMSUNG=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Allow selection of the S3C24XX on-board serial ports for use as
-	  an virtual console.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttySACx". (Try "man bootparam" or see the documentation of
-	  your boot loader about how to pass options to the kernel at
-	  boot time.)
-
-config SERIAL_S3C2400
-	tristate "Samsung S3C2410 Serial port support"
-	depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
-	default y if CPU_S3C2400
-	help
-	  Serial port support for the Samsung S3C2400 SoC
-
-config SERIAL_S3C2410
-	tristate "Samsung S3C2410 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C2410
-	default y if CPU_S3C2410
-	help
-	  Serial port support for the Samsung S3C2410 SoC
-
-config SERIAL_S3C2412
-	tristate "Samsung S3C2412/S3C2413 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C2412
-	default y if CPU_S3C2412
-	help
-	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
-
-config SERIAL_S3C2440
-	tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
-	default y if CPU_S3C2440
-	default y if CPU_S3C2442
-	select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
-	help
-	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
-
-config SERIAL_S3C24A0
-	tristate "Samsung S3C24A0 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C24A0
-	default y if CPU_S3C24A0
-	help
-	  Serial port support for the Samsung S3C24A0 SoC
-
-config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
-	select SERIAL_SAMSUNG_UARTS_4
-	default y
-	help
-	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
-	  and S5PC100 SoCs
-
-config SERIAL_S5PV210
-	tristate "Samsung S5PV210 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
-	select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
-	default y
-	help
-	  Serial port support for Samsung's S5P Family of SoC's
-
-
-config SERIAL_MAX3100
-	tristate "MAX3100 support"
-	depends on SPI
-	select SERIAL_CORE
-	help
-	  MAX3100 chip support
-
-config SERIAL_MAX3107
-	tristate "MAX3107 support"
-	depends on SPI
-	select SERIAL_CORE
-	help
-	  MAX3107 chip support
-
-config SERIAL_MAX3107_AAVA
-	tristate "MAX3107 AAVA platform support"
-	depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
-	select SERIAL_CORE
-	help
-	  Support for the MAX3107 chip configuration found on the AAVA
-	  platform. Includes the extra initialisation and GPIO support
-	  neded for this device.
-
-config SERIAL_DZ
-	bool "DECstation DZ serial driver"
-	depends on MACH_DECSTATION && 32BIT
-	select SERIAL_CORE
-	default y
-	---help---
-	  DZ11-family serial controllers for DECstations and VAXstations,
-	  including the DC7085, M7814, and M7819.
-
-config SERIAL_DZ_CONSOLE
-	bool "Support console on DECstation DZ serial driver"
-	depends on SERIAL_DZ=y
-	select SERIAL_CORE_CONSOLE
-	default y
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode).
-
-	  Note that the firmware uses ttyS3 as the serial console on
-	  DECstations that use this driver.
-
-	  If unsure, say Y.
-
-config SERIAL_ZS
-	tristate "DECstation Z85C30 serial support"
-	depends on MACH_DECSTATION
-	select SERIAL_CORE
-	default y
-	---help---
-	  Support for the Zilog 85C350 serial communications controller used
-	  for serial ports in newer DECstation systems.  These include the
-	  DECsystem 5900 and all models of the DECstation and DECsystem 5000
-	  systems except from model 200.
-
-	  If unsure, say Y.  To compile this driver as a module, choose M here:
-	  the module will be called zs.
-
-config SERIAL_ZS_CONSOLE
-	bool "Support for console on a DECstation Z85C30 serial port"
-	depends on SERIAL_ZS=y
-	select SERIAL_CORE_CONSOLE
-	default y
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode).
-
-	  Note that the firmware uses ttyS1 as the serial console on the
-	  Maxine and ttyS3 on the others using this driver.
-
-	  If unsure, say Y.
-
-config SERIAL_21285
-	tristate "DC21285 serial port support"
-	depends on ARM && FOOTBRIDGE
-	select SERIAL_CORE
-	help
-	  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
-	  PCI bridge you can enable its onboard serial port by enabling this
-	  option.
-
-config SERIAL_21285_CONSOLE
-	bool "Console on DC21285 serial port"
-	depends on SERIAL_21285=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the 21285 footbridge you can
-	  make it the console by answering Y to this option.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyFB". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_MPSC
-	bool "Marvell MPSC serial port support"
-	depends on PPC32 && MV64X60
-	select SERIAL_CORE
-	help
-	  Say Y here if you want to use the Marvell MPSC serial controller.
-
-config SERIAL_MPSC_CONSOLE
-	bool "Support for console on Marvell MPSC serial port"
-	depends on SERIAL_MPSC
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you want to support a serial console on a Marvell MPSC.
-
-config SERIAL_PXA
-	bool "PXA serial port support"
-	depends on ARCH_PXA || ARCH_MMP
-	select SERIAL_CORE
-	help
-	  If you have a machine based on an Intel XScale PXA2xx CPU you
-	  can enable its onboard serial ports by enabling this option.
-
-config SERIAL_PXA_CONSOLE
-	bool "Console on PXA serial port"
-	depends on SERIAL_PXA
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the Intel XScale PXA
-	  CPU you can make it the console by answering Y to this option.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttySA0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_SA1100
-	bool "SA1100 serial port support"
-	depends on ARM && ARCH_SA1100
-	select SERIAL_CORE
-	help
-	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
-	  can enable its onboard serial port by enabling this option.
-	  Please read <file:Documentation/arm/SA1100/serial_UART> for further
-	  info.
-
-config SERIAL_SA1100_CONSOLE
-	bool "Console on SA1100 serial port"
-	depends on SERIAL_SA1100
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the SA1100/SA1110 StrongARM
-	  CPU you can make it the console by answering Y to this option.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttySA0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_MRST_MAX3110
-	tristate "SPI UART driver for Max3110"
-	depends on SPI_DW_PCI
-	select SERIAL_CORE
-	select SERIAL_CORE_CONSOLE
-	help
-	  This is the UART protocol driver for the MAX3110 device on
-	  the Intel Moorestown platform. On other systems use the max3100
-	  driver.
-
-config SERIAL_MFD_HSU
-	tristate "Medfield High Speed UART support"
-	depends on PCI
-	select SERIAL_CORE
-
-config SERIAL_MFD_HSU_CONSOLE
-	boolean "Medfile HSU serial console support"
-	depends on SERIAL_MFD_HSU=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_BFIN
-	tristate "Blackfin serial port support"
-	depends on BLACKFIN
-	select SERIAL_CORE
-	select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
-	help
-	  Add support for the built-in UARTs on the Blackfin.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_5xx.
-
-config SERIAL_BFIN_CONSOLE
-	bool "Console on Blackfin serial port"
-	depends on SERIAL_BFIN=y
-	select SERIAL_CORE_CONSOLE
-
-choice
-	prompt "UART Mode"
-	depends on SERIAL_BFIN
-	default SERIAL_BFIN_DMA
-	help
-	  This driver supports the built-in serial ports of the Blackfin family
-	  of CPUs
-
-config SERIAL_BFIN_DMA
-	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
-	help
-	  This driver works under DMA mode. If this option is selected, the
-	  blackfin simple dma driver is also enabled.
-
-config SERIAL_BFIN_PIO
-	bool "PIO mode"
-	help
-	  This driver works under PIO mode.
-
-endchoice
-
-config SERIAL_BFIN_UART0
-	bool "Enable UART0"
-	depends on SERIAL_BFIN
-	help
-	  Enable UART0
-
-config BFIN_UART0_CTSRTS
-	bool "Enable UART0 hardware flow control"
-	depends on SERIAL_BFIN_UART0
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART1
-	bool "Enable UART1"
-	depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
-	help
-	  Enable UART1
-
-config BFIN_UART1_CTSRTS
-	bool "Enable UART1 hardware flow control"
-	depends on SERIAL_BFIN_UART1
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART2
-	bool "Enable UART2"
-	depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
-	help
-	  Enable UART2
-
-config BFIN_UART2_CTSRTS
-	bool "Enable UART2 hardware flow control"
-	depends on SERIAL_BFIN_UART2
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART3
-	bool "Enable UART3"
-	depends on SERIAL_BFIN && (BF54x)
-	help
-	  Enable UART3
-
-config BFIN_UART3_CTSRTS
-	bool "Enable UART3 hardware flow control"
-	depends on SERIAL_BFIN_UART3
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_IMX
-	bool "IMX serial port support"
-	depends on ARM && (ARCH_IMX || ARCH_MXC)
-	select SERIAL_CORE
-	select RATIONAL
-	help
-	  If you have a machine based on a Motorola IMX CPU you
-	  can enable its onboard serial port by enabling this option.
-
-config SERIAL_IMX_CONSOLE
-	bool "Console on IMX serial port"
-	depends on SERIAL_IMX
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the Motorola IMX
-	  CPU you can make it the console by answering Y to this option.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttySA0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_UARTLITE
-	tristate "Xilinx uartlite serial port support"
-	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE
-	select SERIAL_CORE
-	help
-	  Say Y here if you want to use the Xilinx uartlite serial controller.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called uartlite.
-
-config SERIAL_UARTLITE_CONSOLE
-	bool "Support for console on Xilinx uartlite serial port"
-	depends on SERIAL_UARTLITE=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use a Xilinx uartlite as the system
-	  console (the system console is the device which receives all kernel
-	  messages and warnings and which allows logins in single user mode).
-
-config SERIAL_SUNCORE
-	bool
-	depends on SPARC
-	select SERIAL_CORE
-	select SERIAL_CORE_CONSOLE
-	default y
-
-config SERIAL_SUNZILOG
-	tristate "Sun Zilog8530 serial support"
-	depends on SPARC
-	help
-	  This driver supports the Zilog8530 serial ports found on many Sparc
-	  systems.  Say Y or M if you want to be able to these serial ports.
-
-config SERIAL_SUNZILOG_CONSOLE
-	bool "Console on Sun Zilog8530 serial port"
-	depends on SERIAL_SUNZILOG=y
-	help
-	  If you would like to be able to use the Zilog8530 serial port
-	  on your Sparc system as the console, you can do so by answering
-	  Y to this option.
-
-config SERIAL_SUNSU
-	tristate "Sun SU serial support"
-	depends on SPARC && PCI
-	help
-	  This driver supports the 8250 serial ports that run the keyboard and
-	  mouse on (PCI) UltraSPARC systems.  Say Y or M if you want to be able
-	  to these serial ports.
-
-config SERIAL_SUNSU_CONSOLE
-	bool "Console on Sun SU serial port"
-	depends on SERIAL_SUNSU=y
-	help
-	  If you would like to be able to use the SU serial port
-	  on your Sparc system as the console, you can do so by answering
-	  Y to this option.
-
-config SERIAL_MUX
-	tristate "Serial MUX support"
-	depends on GSC
-	select SERIAL_CORE
-	default y
-	---help---
-	  Saying Y here will enable the hardware MUX serial driver for
-	  the Nova, K class systems and D class with a 'remote control card'.
-	  The hardware MUX is not 8250/16550 compatible therefore the
-	  /dev/ttyB0 device is shared between the Serial MUX and the PDC
-	  software console. The following steps need to be completed to use
-	  the Serial MUX:
-
-	    1. create the device entry (mknod /dev/ttyB0 c 11 0)
-	    2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
-	    3. Add device ttyB0 to /etc/securetty (if you want to log on as
-		 root on this console.)
-	    4. Change the kernel command console parameter to: console=ttyB0
-
-config SERIAL_MUX_CONSOLE
-	bool "Support for console on serial MUX"
-	depends on SERIAL_MUX=y
-	select SERIAL_CORE_CONSOLE
-	default y
-
-config PDC_CONSOLE
-	bool "PDC software console support"
-	depends on PARISC && !SERIAL_MUX && VT
-	default n
-	help
-	  Saying Y here will enable the software based PDC console to be 
-	  used as the system console.  This is useful for machines in 
-	  which the hardware based console has not been written yet.  The
-	  following steps must be competed to use the PDC console:
-
-	    1. create the device entry (mknod /dev/ttyB0 c 11 0)
-	    2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
-	    3. Add device ttyB0 to /etc/securetty (if you want to log on as
-		 root on this console.)
-	    4. Change the kernel command console parameter to: console=ttyB0
-
-config SERIAL_SUNSAB
-	tristate "Sun Siemens SAB82532 serial support"
-	depends on SPARC && PCI
-	help
-	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
-	  (PCI) UltraSPARC systems.  Say Y or M if you want to be able to these
-	  serial ports.
-
-config SERIAL_SUNSAB_CONSOLE
-	bool "Console on Sun Siemens SAB82532 serial port"
-	depends on SERIAL_SUNSAB=y
-	help
-	  If you would like to be able to use the SAB82532 serial port
-	  on your Sparc system as the console, you can do so by answering
-	  Y to this option.
-
-config SERIAL_SUNHV
-	bool "Sun4v Hypervisor Console support"
-	depends on SPARC64
-	help
-	  This driver supports the console device found on SUN4V Sparc
-	  systems.  Say Y if you want to be able to use this device.
-
-config SERIAL_IP22_ZILOG
-	tristate "SGI Zilog8530 serial support"
-	depends on SGI_HAS_ZILOG
-	select SERIAL_CORE
-	help
-	  This driver supports the Zilog8530 serial ports found on SGI
-	  systems.  Say Y or M if you want to be able to these serial ports.
-
-config SERIAL_IP22_ZILOG_CONSOLE
-	bool "Console on SGI Zilog8530 serial port"
-	depends on SERIAL_IP22_ZILOG=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_SH_SCI
-	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
-	select SERIAL_CORE
-
-config SERIAL_SH_SCI_NR_UARTS
-	int "Maximum number of SCI(F) serial ports"
-	depends on SERIAL_SH_SCI
-	default "2"
-
-config SERIAL_SH_SCI_CONSOLE
-	bool "Support for console on SuperH SCI(F)"
-	depends on SERIAL_SH_SCI=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_SH_SCI_DMA
-	bool "DMA support"
-	depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
-
-config SERIAL_PNX8XXX
-	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
-	select SERIAL_CORE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial ports, say Y.  Otherwise, say N.
-
-config SERIAL_PNX8XXX_CONSOLE
-	bool "Enable PNX8XX0 serial console"
-	depends on SERIAL_PNX8XXX
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
-	  and you want to use serial console, say Y. Otherwise, say N.
-
-config SERIAL_CORE
-	tristate
-
-config SERIAL_CORE_CONSOLE
-	bool
-
-config CONSOLE_POLL
-	bool
-
-config SERIAL_68328
-	bool "68328 serial support"
-	depends on M68328 || M68EZ328 || M68VZ328
-	help
-	  This driver supports the built-in serial port of the Motorola 68328
-	  (standard, EZ and VZ varieties).
-
-config SERIAL_68328_RTS_CTS
-	bool "Support RTS/CTS on 68328 serial port"
-	depends on SERIAL_68328
-
-config SERIAL_MCF
-	bool "Coldfire serial support"
-	depends on COLDFIRE
-	select SERIAL_CORE
-	help
-	  This serial driver supports the Freescale Coldfire serial ports.
-
-config SERIAL_MCF_BAUDRATE
-	int "Default baudrate for Coldfire serial ports"
-	depends on SERIAL_MCF
-	default 19200
-	help
-	  This setting lets you define what the default baudrate is for the
-	  ColdFire serial ports. The usual default varies from board to board,
-	  and this setting is a way of catering for that.
-
-config SERIAL_MCF_CONSOLE
-	bool "Coldfire serial console support"
-	depends on SERIAL_MCF
-	select SERIAL_CORE_CONSOLE
-	help
-	  Enable a ColdFire internal serial port to be the system console.
-
-config SERIAL_68360_SMC
-	bool "68360 SMC uart support"
-	depends on M68360
-	help
-	  This driver supports the SMC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360_SCC
-	bool "68360 SCC uart support"
-	depends on M68360
-	help
-	  This driver supports the SCC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360
-	bool
-	depends on SERIAL_68360_SMC || SERIAL_68360_SCC
-	default y
-
-config SERIAL_PMACZILOG
-	tristate "Mac or PowerMac z85c30 ESCC support"
-	depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
-	select SERIAL_CORE
-	help
-	  This driver supports the Zilog z85C30 serial ports found on
-	  (Power)Mac machines.
-	  Say Y or M if you want to be able to these serial ports.
-
-config SERIAL_PMACZILOG_TTYS
-	bool "Use ttySn device nodes for Zilog z85c30"
-	depends on SERIAL_PMACZILOG
-	help
-	  The pmac_zilog driver for the z85C30 chip on many powermacs
-	  historically used the device numbers for /dev/ttySn.  The
-	  8250 serial port driver also uses these numbers, which means
-	  the two drivers being unable to coexist; you could not use
-	  both z85C30 and 8250 type ports at the same time.
-
-	  If this option is not selected, the pmac_zilog driver will
-	  use the device numbers allocated for /dev/ttyPZn.  This allows
-	  the pmac_zilog and 8250 drivers to co-exist, but may cause
-	  existing userspace setups to break.  Programs that need to
-	  access the built-in serial ports on powermacs will need to
-	  be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
-
-	  If you enable this option, any z85c30 ports in the system will
-	  be registered as ttyS0 onwards as in the past, and you will be
-	  unable to use the 8250 module for PCMCIA or other 16C550-style
-	  UARTs.
-
-	  Say N unless you need the z85c30 ports on your (Power)Mac
-	  to appear as /dev/ttySn.
-
-config SERIAL_PMACZILOG_CONSOLE
-	bool "Console on Mac or PowerMac z85c30 serial port"
-	depends on SERIAL_PMACZILOG=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you would like to be able to use the z85c30 serial port
-	  on your (Power)Mac as the console, you can do so by answering
-	  Y to this option.
-
-config SERIAL_LH7A40X
-	tristate "Sharp LH7A40X embedded UART support"
-	depends on ARM && ARCH_LH7A40X
-	select SERIAL_CORE
-	help
-	  This enables support for the three on-board UARTs of the
-	  Sharp LH7A40X series CPUs.  Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
-	bool "Support for console on Sharp LH7A40X serial port"
-	depends on SERIAL_LH7A40X=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use one of the serial ports as the
-	  system console--the system console is the device which
-	  receives all kernel messages and warnings and which allows
-	  logins in single user mode.
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the default system console, but
-	  you can alter that using a kernel command line, for example
-	  "console=ttyAM1".
-
-config SERIAL_CPM
-	tristate "CPM SCC/SMC serial port support"
-	depends on CPM2 || 8xx
-	select SERIAL_CORE
-	help
-	  This driver supports the SCC and SMC serial ports on Motorola 
-	  embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
-
-config SERIAL_CPM_CONSOLE
-	bool "Support for console on CPM SCC/SMC serial port"
-	depends on SERIAL_CPM=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you wish to use a SCC or SMC CPM UART as the system
-	  console (the system console is the device which receives all kernel
-	  messages and warnings and which allows logins in single user mode).
-
-	  Even if you say Y here, the currently visible framebuffer console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyCPM0". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-config SERIAL_SGI_L1_CONSOLE
-	bool "SGI Altix L1 serial console support"
-	depends on IA64_GENERIC || IA64_SGI_SN2
-	select SERIAL_CORE
-	select SERIAL_CORE_CONSOLE
-	help
-		If you have an SGI Altix and you would like to use the system
-		controller serial port as your console (you want this!),
-		say Y.  Otherwise, say N.
-
-config SERIAL_MPC52xx
-	tristate "Freescale MPC52xx/MPC512x family PSC serial support"
-	depends on PPC_MPC52xx || PPC_MPC512x
-	select SERIAL_CORE
-	help
-	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
-	  like to use them, you must answer Y or M to this option. Note that
-	  for use as console, it must be included in kernel and not as a
-	  module.
-
-config SERIAL_MPC52xx_CONSOLE
-	bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
-	depends on SERIAL_MPC52xx=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Select this options if you'd like to use one of the PSC serial port
-	  of the Freescale MPC52xx family as a console.
-
-config SERIAL_MPC52xx_CONSOLE_BAUD
-	int "Freescale MPC52xx/MPC512x family PSC serial port baud"
-	depends on SERIAL_MPC52xx_CONSOLE=y
-	default "9600"
-	help
-	  Select the MPC52xx console baud rate.
-	  This value is only used if the bootloader doesn't pass in the
-	  console baudrate
-
-config SERIAL_ICOM
-	tristate "IBM Multiport Serial Adapter"
-	depends on PCI && (PPC_ISERIES || PPC_PSERIES)
-	select SERIAL_CORE
-	select FW_LOADER
-	help
-	  This driver is for a family of multiport serial adapters
-	  including 2 port RVX, 2 port internal modem, 4 port internal
-	  modem and a split 1 port RVX and 1 port internal modem.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called icom.
-
-config SERIAL_M32R_SIO
-	bool "M32R SIO I/F"
-	depends on M32R
-	default y
-	select SERIAL_CORE
-	help
-	  Say Y here if you want to use the M32R serial controller.
-
-config SERIAL_M32R_SIO_CONSOLE
-	bool "use SIO console"
-	depends on SERIAL_M32R_SIO=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you want to support a serial console.
-
-	  If you use an M3T-M32700UT or an OPSPUT platform,
-	  please say also y for SERIAL_M32R_PLDSIO.
-
-config SERIAL_M32R_PLDSIO
-	bool "M32R SIO I/F on a PLD"
-	depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
-	default n
-	help
-	  Say Y here if you want to use the M32R serial controller
-	  on a PLD (Programmable Logic Device).
-
-	  If you use an M3T-M32700UT or an OPSPUT platform,
-	  please say Y.
-
-config SERIAL_TXX9
-	bool "TMPTX39XX/49XX SIO support"
-	depends on HAS_TXX9_SERIAL
-	select SERIAL_CORE
-	default y
-
-config HAS_TXX9_SERIAL
-	bool
-
-config SERIAL_TXX9_NR_UARTS
-	int "Maximum number of TMPTX39XX/49XX SIO ports"
-	depends on SERIAL_TXX9
-	default "6"
-
-config SERIAL_TXX9_CONSOLE
-	bool "TMPTX39XX/49XX SIO Console support"
-	depends on SERIAL_TXX9=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_TXX9_STDSERIAL
-	bool "TX39XX/49XX SIO act as standard serial"
-	depends on !SERIAL_8250 && SERIAL_TXX9
-
-config SERIAL_VR41XX
-	tristate "NEC VR4100 series Serial Interface Unit support"
-	depends on CPU_VR41XX
-	select SERIAL_CORE
-	help
-	  If you have a NEC VR4100 series processor and you want to use
-	  Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
-	  (not include VR4111/VR4121 DSIU), say Y.  Otherwise, say N.
-
-config SERIAL_VR41XX_CONSOLE
-	bool "Enable NEC VR4100 series Serial Interface Unit console"
-	depends on SERIAL_VR41XX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have a NEC VR4100 series processor and you want to use
-	  a console on a serial port, say Y.  Otherwise, say N.
-
-config SERIAL_JSM
-	tristate "Digi International NEO PCI Support"
-	depends on PCI
-	select SERIAL_CORE
-	help
-	  This is a driver for Digi International's Neo series
-	  of cards which provide multiple serial ports. You would need
-	  something like this to connect more than two modems to your Linux
-	  box, for instance in order to become a dial-in server. This driver
-	  supports PCI boards only.
-
-	  If you have a card like this, say Y here, otherwise say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called jsm.
-
-config SERIAL_SGI_IOC4
-	tristate "SGI IOC4 controller serial support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
-	select SERIAL_CORE
-	help
-		If you have an SGI Altix with an IOC4 based Base IO card
-		and wish to use the serial ports on this card, say Y.
-		Otherwise, say N.
-
-config SERIAL_SGI_IOC3
-	tristate "SGI Altix IOC3 serial support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
-	select SERIAL_CORE
-	help
-	  If you have an SGI Altix with an IOC3 serial card,
-	  say Y or M.  Otherwise, say N.
-
-config SERIAL_MSM
-	bool "MSM on-chip serial port support"
-	depends on ARM && ARCH_MSM
-	select SERIAL_CORE
-
-config SERIAL_MSM_CONSOLE
-	bool "MSM serial console support"
-	depends on SERIAL_MSM=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_VT8500
-	bool "VIA VT8500 on-chip serial port support"
-	depends on ARM && ARCH_VT8500
-	select SERIAL_CORE
-
-config SERIAL_VT8500_CONSOLE
-	bool "VIA VT8500 serial console support"
-	depends on SERIAL_VT8500=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_NETX
-	tristate "NetX serial port support"
-	depends on ARM && ARCH_NETX
-	select SERIAL_CORE
-	help
-	  If you have a machine based on a Hilscher NetX SoC you
-	  can enable its onboard serial port by enabling this option.
-
-          To compile this driver as a module, choose M here: the
-          module will be called netx-serial.
-
-config SERIAL_NETX_CONSOLE
-	bool "Console on NetX serial port"
-	depends on SERIAL_NETX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the Hilscher NetX SoC
-	  you can make it the console by answering Y to this option.
-
-config SERIAL_OF_PLATFORM
-	tristate "Serial port on Open Firmware platform bus"
-	depends on OF
-	depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
-	help
-	  If you have a PowerPC based system that has serial ports
-	  on a platform specific bus, you should enable this option.
-	  Currently, only 8250 compatible ports are supported, but
-	  others can easily be added.
-
-config SERIAL_OMAP
-	tristate "OMAP serial port support"
-	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
-	select SERIAL_CORE
-	help
-	  If you have a machine based on an Texas Instruments OMAP CPU you
-	  can enable its onboard serial ports by enabling this option.
-
-	  By enabling this option you take advantage of dma feature available
-	  with the omap-serial driver. DMA support can be enabled from platform
-	  data.
-
-config SERIAL_OMAP_CONSOLE
-	bool "Console on OMAP serial port"
-	depends on SERIAL_OMAP
-	select SERIAL_CORE_CONSOLE
-	help
-	  Select this option if you would like to use omap serial port as
-	  console.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyOx". (Try "man bootparam" or see the documentation of
-	  your boot loader about how to pass options to the kernel at
-	  boot time.)
-
-config SERIAL_OF_PLATFORM_NWPSERIAL
-	tristate "NWP serial port driver"
-	depends on PPC_OF && PPC_DCR
-	select SERIAL_OF_PLATFORM
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_CORE
-	help
-	  This driver supports the cell network processor nwp serial
-	  device.
-
-config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
-	bool "Console on NWP serial port"
-	depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on the NWP serial ports.
-
-config SERIAL_QE
-	tristate "Freescale QUICC Engine serial port support"
-	depends on QUICC_ENGINE
-	select SERIAL_CORE
-	select FW_LOADER
-	default n
-	help
-	  This driver supports the QE serial ports on Freescale embedded
-	  PowerPC that contain a QUICC Engine.
-
-config SERIAL_SC26XX
-	tristate "SC2681/SC2692 serial port support"
-	depends on SNI_RM
-	select SERIAL_CORE
-	help
-	  This is a driver for the onboard serial ports of
-	  older RM400 machines.
-
-config SERIAL_SC26XX_CONSOLE
-	bool "Console on SC2681/SC2692 serial port"
-	depends on SERIAL_SC26XX
-	select SERIAL_CORE_CONSOLE
-	help
-	  Support for Console on SC2681/SC2692 serial ports.
-
-config SERIAL_BFIN_SPORT
-	tristate "Blackfin SPORT emulate UART"
-	depends on BLACKFIN
-	select SERIAL_CORE
-	help
-	  Enable SPORT emulate UART on Blackfin series.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_sport_uart.
-
-config SERIAL_BFIN_SPORT_CONSOLE
-	bool "Console on Blackfin sport emulated uart"
-	depends on SERIAL_BFIN_SPORT=y
-	select SERIAL_CORE_CONSOLE
-
-config SERIAL_BFIN_SPORT0_UART
-	bool "Enable UART over SPORT0"
-	depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
-	help
-	  Enable UART over SPORT0
-
-config SERIAL_BFIN_SPORT0_UART_CTSRTS
-	bool "Enable UART over SPORT0 hardware flow control"
-	depends on SERIAL_BFIN_SPORT0_UART
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT1_UART
-	bool "Enable UART over SPORT1"
-	depends on SERIAL_BFIN_SPORT
-	help
-	  Enable UART over SPORT1
-
-config SERIAL_BFIN_SPORT1_UART_CTSRTS
-	bool "Enable UART over SPORT1 hardware flow control"
-	depends on SERIAL_BFIN_SPORT1_UART
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT2_UART
-	bool "Enable UART over SPORT2"
-	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
-	help
-	  Enable UART over SPORT2
-
-config SERIAL_BFIN_SPORT2_UART_CTSRTS
-	bool "Enable UART over SPORT2 hardware flow control"
-	depends on SERIAL_BFIN_SPORT2_UART
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT3_UART
-	bool "Enable UART over SPORT3"
-	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
-	help
-	  Enable UART over SPORT3
-
-config SERIAL_BFIN_SPORT3_UART_CTSRTS
-	bool "Enable UART over SPORT3 hardware flow control"
-	depends on SERIAL_BFIN_SPORT3_UART
-	help
-	  Enable hardware flow control in the driver.
-
-config SERIAL_TIMBERDALE
-	tristate "Support for timberdale UART"
-	select SERIAL_CORE
-	---help---
-	Add support for UART controller on timberdale.
-
-config SERIAL_BCM63XX
-	tristate "bcm63xx serial port support"
-	select SERIAL_CORE
-	depends on BCM63XX
-	help
-	  If you have a bcm63xx CPU, you can enable its onboard
-	  serial port by enabling this options.
-
-          To compile this driver as a module, choose M here: the
-          module will be called bcm963xx_uart.
-
-config SERIAL_BCM63XX_CONSOLE
-	bool "Console on bcm63xx serial port"
-	depends on SERIAL_BCM63XX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have enabled the serial port on the bcm63xx CPU
-	  you can make it the console by answering Y to this option.
-
-config SERIAL_GRLIB_GAISLER_APBUART
-	tristate "GRLIB APBUART serial support"
-	depends on OF
-	---help---
-	Add support for the GRLIB APBUART serial port.
-
-config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
-	bool "Console on GRLIB APBUART serial port"
-	depends on SERIAL_GRLIB_GAISLER_APBUART=y
-	select SERIAL_CORE_CONSOLE
-	help
-	Support for running a console on the GRLIB APBUART
-
-config SERIAL_ALTERA_JTAGUART
-	tristate "Altera JTAG UART support"
-	select SERIAL_CORE
-	help
-	  This driver supports the Altera JTAG UART port.
-
-config SERIAL_ALTERA_JTAGUART_CONSOLE
-	bool "Altera JTAG UART console support"
-	depends on SERIAL_ALTERA_JTAGUART=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Enable a Altera JTAG UART port to be the system console.
-
-config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
-	bool "Bypass output when no connection"
-	depends on SERIAL_ALTERA_JTAGUART_CONSOLE
-	select SERIAL_CORE_CONSOLE
-	help
-	  Bypass console output and keep going even if there is no
-	  JTAG terminal connection with the host.
-
-config SERIAL_ALTERA_UART
-	tristate "Altera UART support"
-	select SERIAL_CORE
-	help
-	  This driver supports the Altera softcore UART port.
-
-config SERIAL_ALTERA_UART_MAXPORTS
-	int "Maximum number of Altera UART ports"
-	depends on SERIAL_ALTERA_UART
-	default 4
-	help
-	  This setting lets you define the maximum number of the Altera
-	  UART ports. The usual default varies from board to board, and
-	  this setting is a way of catering for that.
-
-config SERIAL_ALTERA_UART_BAUDRATE
-	int "Default baudrate for Altera UART ports"
-	depends on SERIAL_ALTERA_UART
-	default 115200
-	help
-	  This setting lets you define what the default baudrate is for the
-	  Altera UART ports. The usual default varies from board to board,
-	  and this setting is a way of catering for that.
-
-config SERIAL_ALTERA_UART_CONSOLE
-	bool "Altera UART console support"
-	depends on SERIAL_ALTERA_UART=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Enable a Altera UART port to be the system console.
-
-config SERIAL_IFX6X60
-        tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
-	depends on GPIOLIB && SPI && EXPERIMENTAL
-	help
-	  Support for the IFX6x60 modem devices on Intel MID platforms.
-
-config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
-	select SERIAL_CORE
-	select PCH_DMA
-	help
-	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
-	  which is an IOH(Input/Output Hub) for x86 embedded processor.
-	  Enabling PCH_DMA, this PCH UART works as DMA mode.
-endmenu