summaryrefslogtreecommitdiff
path: root/drivers/serial/jsm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/jsm
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/jsm')
-rw-r--r--drivers/serial/jsm/Makefile8
-rw-r--r--drivers/serial/jsm/jsm.h437
-rw-r--r--drivers/serial/jsm/jsm_driver.c404
-rw-r--r--drivers/serial/jsm/jsm_neo.c1427
-rw-r--r--drivers/serial/jsm/jsm_tty.c1038
5 files changed, 3314 insertions, 0 deletions
diff --git a/drivers/serial/jsm/Makefile b/drivers/serial/jsm/Makefile
new file mode 100644
index 000000000000..e46b6e0f8b18
--- /dev/null
+++ b/drivers/serial/jsm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Jasmine adapter
+#
+
+obj-$(CONFIG_SERIAL_JSM) += jsm.o
+
+jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o
+
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
new file mode 100644
index 000000000000..b12ee02a0f7c
--- /dev/null
+++ b/drivers/serial/jsm/jsm.h
@@ -0,0 +1,437 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+
+#ifndef __JSM_DRIVER_H
+#define __JSM_DRIVER_H
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h> /* To pick up the varions Linux types */
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+/*
+ * Debugging levels can be set using debug insmod variable
+ * They can also be compiled out completely.
+ */
+enum {
+ DBG_INIT = 0x01,
+ DBG_BASIC = 0x02,
+ DBG_CORE = 0x04,
+ DBG_OPEN = 0x08,
+ DBG_CLOSE = 0x10,
+ DBG_READ = 0x20,
+ DBG_WRITE = 0x40,
+ DBG_IOCTL = 0x80,
+ DBG_PROC = 0x100,
+ DBG_PARAM = 0x200,
+ DBG_PSCAN = 0x400,
+ DBG_EVENT = 0x800,
+ DBG_DRAIN = 0x1000,
+ DBG_MSIGS = 0x2000,
+ DBG_MGMT = 0x4000,
+ DBG_INTR = 0x8000,
+ DBG_CARR = 0x10000,
+};
+
+#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \
+ if ((DBG_##nlevel & jsm_debug)) \
+ dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
+
+#define MAXPORTS 8
+#define MAX_STOPS_SENT 5
+
+/* Board type definitions */
+
+#define T_NEO 0000
+#define T_CLASSIC 0001
+#define T_PCIBUS 0400
+
+/* Board State Definitions */
+
+#define BD_RUNNING 0x0
+#define BD_REASON 0x7f
+#define BD_NOTFOUND 0x1
+#define BD_NOIOPORT 0x2
+#define BD_NOMEM 0x3
+#define BD_NOBIOS 0x4
+#define BD_NOFEP 0x5
+#define BD_FAILED 0x6
+#define BD_ALLOCATED 0x7
+#define BD_TRIBOOT 0x8
+#define BD_BADKME 0x80
+
+
+/* 4 extra for alignment play space */
+#define WRITEBUFLEN ((4096) + 4)
+#define MYFLIPLEN N_TTY_BUF_SIZE
+
+#define JSM_VERSION "jsm: 1.1-1-INKERNEL"
+#define JSM_PARTNUM "40002438_A-INKERNEL"
+
+/*
+ * All the possible states the driver can be while being loaded.
+ */
+enum {
+ DRIVER_INITIALIZED = 0,
+ DRIVER_READY
+};
+
+/*
+ * All the possible states the board can be while booting up.
+ */
+enum {
+ BOARD_FAILED = 0,
+ BOARD_FOUND,
+ BOARD_READY
+};
+
+struct board_id {
+ u8 *name;
+ u32 maxports;
+};
+
+struct jsm_board;
+struct jsm_channel;
+
+/************************************************************************
+ * Per board operations structure *
+ ************************************************************************/
+struct board_ops {
+ irqreturn_t (*intr) (int irq, void *voidbrd, struct pt_regs *regs);
+ void (*uart_init) (struct jsm_channel *ch);
+ void (*uart_off) (struct jsm_channel *ch);
+ void (*param) (struct jsm_channel *ch);
+ void (*assert_modem_signals) (struct jsm_channel *ch);
+ void (*flush_uart_write) (struct jsm_channel *ch);
+ void (*flush_uart_read) (struct jsm_channel *ch);
+ void (*disable_receiver) (struct jsm_channel *ch);
+ void (*enable_receiver) (struct jsm_channel *ch);
+ void (*send_break) (struct jsm_channel *ch);
+ void (*clear_break) (struct jsm_channel *ch, int);
+ void (*send_start_character) (struct jsm_channel *ch);
+ void (*send_stop_character) (struct jsm_channel *ch);
+ void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch);
+ u32 (*get_uart_bytes_left) (struct jsm_channel *ch);
+ void (*send_immediate_char) (struct jsm_channel *ch, unsigned char);
+};
+
+
+/*
+ * Per-board information
+ */
+struct jsm_board
+{
+ int boardnum; /* Board number: 0-32 */
+
+ int type; /* Type of board */
+ char *name; /* Product Name */
+ u8 rev; /* PCI revision ID */
+ struct pci_dev *pci_dev;
+ u32 maxports; /* MAX ports this board can handle */
+
+ spinlock_t bd_lock; /* Used to protect board */
+
+ spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
+ * the interrupt routine from each other.
+ */
+
+ u32 state; /* State of card. */
+ wait_queue_head_t state_wait; /* Place to sleep on for state change */
+
+ u32 nasync; /* Number of ports on card */
+
+ u32 irq; /* Interrupt request number */
+ u64 intr_count; /* Count of interrupts */
+
+ u64 membase; /* Start of base memory of the card */
+ u64 membase_end; /* End of base memory of the card */
+
+ u8 __iomem *re_map_membase;/* Remapped memory of the card */
+
+ u64 iobase; /* Start of io base of the card */
+ u64 iobase_end; /* End of io base of the card */
+
+ u32 bd_uart_offset; /* Space between each UART */
+
+ struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */
+ char *flipbuf; /* Our flip buffer, alloced if board is found */
+
+ u16 dpatype; /* The board "type", as defined by DPA */
+ u16 dpastatus; /* The board "status", as defined by DPA */
+
+ u32 bd_dividend; /* Board/UARTs specific dividend */
+
+ struct board_ops *bd_ops;
+
+ struct list_head jsm_board_entry;
+};
+
+/************************************************************************
+ * Device flag definitions for ch_flags.
+ ************************************************************************/
+#define CH_PRON 0x0001 /* Printer on string */
+#define CH_STOP 0x0002 /* Output is stopped */
+#define CH_STOPI 0x0004 /* Input is stopped */
+#define CH_CD 0x0008 /* Carrier is present */
+#define CH_FCAR 0x0010 /* Carrier forced on */
+#define CH_HANGUP 0x0020 /* Hangup received */
+
+#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */
+#define CH_OPENING 0x0080 /* Port in fragile open state */
+#define CH_CLOSING 0x0100 /* Port in fragile close state */
+#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */
+#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */
+#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
+#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
+#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
+#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */
+#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
+
+/* Our Read/Error/Write queue sizes */
+#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
+#define RQUEUESIZE (RQUEUEMASK + 1)
+#define EQUEUESIZE RQUEUESIZE
+#define WQUEUESIZE (WQUEUEMASK + 1)
+
+
+/************************************************************************
+ * Channel information structure.
+ ************************************************************************/
+struct jsm_channel {
+ struct uart_port uart_port;
+ struct jsm_board *ch_bd; /* Board structure pointer */
+
+ spinlock_t ch_lock; /* provide for serialization */
+ wait_queue_head_t ch_flags_wait;
+
+ u32 ch_portnum; /* Port number, 0 offset. */
+ u32 ch_open_count; /* open count */
+ u32 ch_flags; /* Channel flags */
+
+ u64 ch_close_delay; /* How long we should drop RTS/DTR for */
+
+ u64 ch_cpstime; /* Time for CPS calculations */
+
+ tcflag_t ch_c_iflag; /* channel iflags */
+ tcflag_t ch_c_cflag; /* channel cflags */
+ tcflag_t ch_c_oflag; /* channel oflags */
+ tcflag_t ch_c_lflag; /* channel lflags */
+ u8 ch_stopc; /* Stop character */
+ u8 ch_startc; /* Start character */
+
+ u32 ch_old_baud; /* Cache of the current baud */
+ u32 ch_custom_speed;/* Custom baud, if set */
+
+ u32 ch_wopen; /* Waiting for open process cnt */
+
+ u8 ch_mostat; /* FEP output modem status */
+ u8 ch_mistat; /* FEP input modem status */
+
+ struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */
+ u8 ch_cached_lsr; /* Cached value of the LSR register */
+
+ u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */
+ u16 ch_r_head; /* Head location of the read queue */
+ u16 ch_r_tail; /* Tail location of the read queue */
+
+ u8 *ch_equeue; /* Our error queue buffer - malloc'ed */
+ u16 ch_e_head; /* Head location of the error queue */
+ u16 ch_e_tail; /* Tail location of the error queue */
+
+ u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */
+ u16 ch_w_head; /* Head location of the write queue */
+ u16 ch_w_tail; /* Tail location of the write queue */
+
+ u64 ch_rxcount; /* total of data received so far */
+ u64 ch_txcount; /* total of data transmitted so far */
+
+ u8 ch_r_tlevel; /* Receive Trigger level */
+ u8 ch_t_tlevel; /* Transmit Trigger level */
+
+ u8 ch_r_watermark; /* Receive Watermark */
+
+
+ u32 ch_stops_sent; /* How many times I have sent a stop character
+ * to try to stop the other guy sending.
+ */
+ u64 ch_err_parity; /* Count of parity errors on channel */
+ u64 ch_err_frame; /* Count of framing errors on channel */
+ u64 ch_err_break; /* Count of breaks on channel */
+ u64 ch_err_overrun; /* Count of overruns on channel */
+
+ u64 ch_xon_sends; /* Count of xons transmitted */
+ u64 ch_xoff_sends; /* Count of xoffs transmitted */
+};
+
+
+/************************************************************************
+ * Per channel/port NEO UART structure *
+ ************************************************************************
+ * Base Structure Entries Usage Meanings to Host *
+ * *
+ * W = read write R = read only *
+ * U = Unused. *
+ ************************************************************************/
+
+struct neo_uart_struct {
+ u8 txrx; /* WR RHR/THR - Holding Reg */
+ u8 ier; /* WR IER - Interrupt Enable Reg */
+ u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+ u8 lcr; /* WR LCR - Line Control Reg */
+ u8 mcr; /* WR MCR - Modem Control Reg */
+ u8 lsr; /* WR LSR - Line Status Reg */
+ u8 msr; /* WR MSR - Modem Status Reg */
+ u8 spr; /* WR SPR - Scratch Pad Reg */
+ u8 fctr; /* WR FCTR - Feature Control Reg */
+ u8 efr; /* WR EFR - Enhanced Function Reg */
+ u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
+ u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */
+ u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
+ u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
+ u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */
+ u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */
+
+ u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */
+ u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */
+ u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */
+ u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */
+};
+
+/* Where to read the extended interrupt register (32bits instead of 8bits) */
+#define UART_17158_POLL_ADDR_OFFSET 0x80
+
+/*
+ * These are the redefinitions for the FCTR on the XR17C158, since
+ * Exar made them different than their earlier design. (XR16C854)
+ */
+
+/* These are only applicable when table D is selected */
+#define UART_17158_FCTR_RTS_NODELAY 0x00
+#define UART_17158_FCTR_RTS_4DELAY 0x01
+#define UART_17158_FCTR_RTS_6DELAY 0x02
+#define UART_17158_FCTR_RTS_8DELAY 0x03
+#define UART_17158_FCTR_RTS_12DELAY 0x12
+#define UART_17158_FCTR_RTS_16DELAY 0x05
+#define UART_17158_FCTR_RTS_20DELAY 0x13
+#define UART_17158_FCTR_RTS_24DELAY 0x06
+#define UART_17158_FCTR_RTS_28DELAY 0x14
+#define UART_17158_FCTR_RTS_32DELAY 0x07
+#define UART_17158_FCTR_RTS_36DELAY 0x16
+#define UART_17158_FCTR_RTS_40DELAY 0x08
+#define UART_17158_FCTR_RTS_44DELAY 0x09
+#define UART_17158_FCTR_RTS_48DELAY 0x10
+#define UART_17158_FCTR_RTS_52DELAY 0x11
+
+#define UART_17158_FCTR_RTS_IRDA 0x10
+#define UART_17158_FCTR_RS485 0x20
+#define UART_17158_FCTR_TRGA 0x00
+#define UART_17158_FCTR_TRGB 0x40
+#define UART_17158_FCTR_TRGC 0x80
+#define UART_17158_FCTR_TRGD 0xC0
+
+/* 17158 trigger table selects.. */
+#define UART_17158_FCTR_BIT6 0x40
+#define UART_17158_FCTR_BIT7 0x80
+
+/* 17158 TX/RX memmapped buffer offsets */
+#define UART_17158_RX_FIFOSIZE 64
+#define UART_17158_TX_FIFOSIZE 64
+
+/* 17158 Extended IIR's */
+#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */
+#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */
+#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
+#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */
+
+/*
+ * These are the extended interrupts that get sent
+ * back to us from the UART's 32bit interrupt register
+ */
+#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */
+#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */
+#define UART_17158_TXRDY 0x3 /* TX Ready */
+#define UART_17158_MSR 0x4 /* Modem State Change */
+#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */
+#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */
+
+/*
+ * These are the EXTENDED definitions for the 17C158's Interrupt
+ * Enable Register.
+ */
+#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */
+#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */
+#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */
+#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */
+#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */
+
+#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */
+#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */
+
+#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */
+#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */
+#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */
+#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */
+
+#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI"
+#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
+#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI"
+#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+
+/*
+ * Our Global Variables.
+ */
+extern struct uart_driver jsm_uart_driver;
+extern struct board_ops jsm_neo_ops;
+extern int jsm_debug;
+extern int jsm_rawreadok;
+
+extern int jsm_driver_state; /* The state of the driver */
+extern char *jsm_driver_state_text[];/* Array of driver state text */
+
+extern spinlock_t jsm_board_head_lock;
+extern struct list_head jsm_board_head;
+
+/*************************************************************************
+ *
+ * Prototypes for non-static functions used in more than one module
+ *
+ *************************************************************************/
+int jsm_tty_write(struct uart_port *port);
+int jsm_tty_init(struct jsm_board *);
+int jsm_uart_port_init(struct jsm_board *);
+int jsm_remove_uart_port(struct jsm_board *);
+void jsm_input(struct jsm_channel *ch);
+void jsm_carrier(struct jsm_channel *ch);
+void jsm_check_queue_flow_control(struct jsm_channel *ch);
+
+void jsm_create_driver_sysfiles(struct device_driver *);
+void jsm_remove_driver_sysfiles(struct device_driver *);
+
+#endif
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
new file mode 100644
index 000000000000..d4847d4f1473
--- /dev/null
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -0,0 +1,404 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+
+#include "jsm.h"
+
+MODULE_AUTHOR("Digi International, http://www.digi.com");
+MODULE_DESCRIPTION("Driver for the Digi International Neo PCI based product line");
+MODULE_SUPPORTED_DEVICE("jsm");
+
+#define JSM_DRIVER_NAME "jsm"
+#define NR_PORTS 32
+#define JSM_MINOR_START 0
+
+struct uart_driver jsm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = JSM_DRIVER_NAME,
+ .dev_name = "ttyn",
+ .major = 253,
+ .minor = JSM_MINOR_START,
+ .nr = NR_PORTS,
+ .cons = NULL,
+};
+
+int jsm_debug;
+int jsm_rawreadok;
+module_param(jsm_debug, int, 0);
+module_param(jsm_rawreadok, int, 0);
+MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
+MODULE_PARM_DESC(jsm_rawreadok, "Bypass flip buffers on input");
+
+/*
+ * Globals
+ */
+int jsm_driver_state = DRIVER_INITIALIZED;
+spinlock_t jsm_board_head_lock = SPIN_LOCK_UNLOCKED;
+LIST_HEAD(jsm_board_head);
+
+static struct pci_device_id jsm_pci_tbl[] = {
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+ { 0,} /* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
+
+static struct board_id jsm_Ids[] = {
+ { PCI_DEVICE_NEO_2DB9_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2DB9PRI_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2RJ45_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME, 2 },
+ { NULL, 0 }
+};
+
+char *jsm_driver_state_text[] = {
+ "Driver Initialized",
+ "Driver Ready."
+};
+
+static int jsm_finalize_board_init(struct jsm_board *brd)
+{
+ int rc = 0;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ if (brd->irq) {
+ rc = request_irq(brd->irq, brd->bd_ops->intr, SA_INTERRUPT|SA_SHIRQ, "JSM", brd);
+
+ if (rc) {
+ printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ rc = -ENODEV;
+ } else
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "Requested and received usage of IRQ %d\n", brd->irq);
+ }
+ return rc;
+}
+
+/*
+ * jsm_found_board()
+ *
+ * A board has been found, init it.
+ */
+static int jsm_found_board(struct pci_dev *pdev, int id)
+{
+ struct jsm_board *brd;
+ int i = 0;
+ int rc = 0;
+ struct list_head *tmp;
+ struct jsm_board *cur_board_entry;
+ unsigned long lock_flags;
+ int adapter_count = 0;
+ int retval;
+
+ brd = kmalloc(sizeof(struct jsm_board), GFP_KERNEL);
+ if (!brd) {
+ dev_err(&pdev->dev, "memory allocation for board structure failed\n");
+ return -ENOMEM;
+ }
+ memset(brd, 0, sizeof(struct jsm_board));
+
+ spin_lock_irqsave(&jsm_board_head_lock, lock_flags);
+ list_for_each(tmp, &jsm_board_head) {
+ cur_board_entry =
+ list_entry(tmp, struct jsm_board,
+ jsm_board_entry);
+ if (cur_board_entry->boardnum != adapter_count) {
+ break;
+ }
+ adapter_count++;
+ }
+
+ list_add_tail(&brd->jsm_board_entry, &jsm_board_head);
+ spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags);
+
+ /* store the info for the board we've found */
+ brd->boardnum = adapter_count;
+ brd->pci_dev = pdev;
+ brd->name = jsm_Ids[id].name;
+ brd->maxports = jsm_Ids[id].maxports;
+ brd->dpastatus = BD_NOFEP;
+ init_waitqueue_head(&brd->state_wait);
+
+ spin_lock_init(&brd->bd_lock);
+ spin_lock_init(&brd->bd_intr_lock);
+
+ brd->state = BOARD_FOUND;
+
+ for (i = 0; i < brd->maxports; i++)
+ brd->channels[i] = NULL;
+
+ /* store which revision we have */
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+
+ brd->irq = pdev->irq;
+
+ switch(brd->pci_dev->device) {
+
+ case PCI_DEVICE_ID_NEO_2DB9:
+ case PCI_DEVICE_ID_NEO_2DB9PRI:
+ case PCI_DEVICE_ID_NEO_2RJ45:
+ case PCI_DEVICE_ID_NEO_2RJ45PRI:
+
+ /*
+ * This chip is set up 100% when we get to it.
+ * No need to enable global interrupts or anything.
+ */
+ brd->dpatype = T_NEO | T_PCIBUS;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "jsm_found_board - NEO adapter\n");
+
+ /* get the PCI Base Address Registers */
+ brd->membase = pci_resource_start(pdev, 0);
+ brd->membase_end = pci_resource_end(pdev, 0);
+
+ if (brd->membase & 1)
+ brd->membase &= ~3;
+ else
+ brd->membase &= ~15;
+
+ /* Assign the board_ops struct */
+ brd->bd_ops = &jsm_neo_ops;
+
+ brd->bd_uart_offset = 0x200;
+ brd->bd_dividend = 921600;
+
+ brd->re_map_membase = ioremap(brd->membase, 0x1000);
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "remapped mem: 0x%p\n", brd->re_map_membase);
+ if (!brd->re_map_membase) {
+ kfree(brd);
+ dev_err(&pdev->dev, "card has no PCI Memory resources, failing board.\n");
+ return -ENOMEM;
+ }
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Did not find any compatible Neo or Classic PCI boards in system.\n");
+ kfree(brd);
+ return -ENXIO;
+ }
+
+ /*
+ * Do tty device initialization.
+ */
+ rc = jsm_finalize_board_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't finalize board init (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed0;
+ }
+
+ rc = jsm_tty_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed1;
+ }
+
+ rc = jsm_uart_port_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed1;
+ }
+
+ brd->state = BOARD_READY;
+ brd->dpastatus = BD_RUNNING;
+
+ /* Log the information about the board */
+ dev_info(&pdev->dev, "board %d: %s (rev %d), irq %d\n",adapter_count, brd->name, brd->rev, brd->irq);
+
+ /*
+ * allocate flip buffer for board.
+ *
+ * Okay to malloc with GFP_KERNEL, we are not at interrupt
+ * context, and there are no locks held.
+ */
+ brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
+ if (!brd->flipbuf) {
+ dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
+ brd->state = BOARD_FAILED;
+ retval = -ENOMEM;
+ goto failed1;
+ }
+ memset(brd->flipbuf, 0, MYFLIPLEN);
+
+ jsm_create_driver_sysfiles(pdev->dev.driver);
+
+ wake_up_interruptible(&brd->state_wait);
+ return 0;
+failed1:
+ free_irq(brd->irq, brd);
+failed0:
+ kfree(brd);
+ iounmap(brd->re_map_membase);
+ return retval;
+}
+
+/* returns count (>= 0), or negative on error */
+static int jsm_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int rc;
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "Device enable FAILED\n");
+ return rc;
+ }
+
+ if ((rc = pci_request_regions(pdev, "jsm"))) {
+ dev_err(&pdev->dev, "pci_request_region FAILED\n");
+ pci_disable_device(pdev);
+ return rc;
+ }
+
+ if ((rc = jsm_found_board(pdev, ent->driver_data))) {
+ dev_err(&pdev->dev, "jsm_found_board FAILED\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return rc;
+ }
+ return rc;
+}
+
+
+/*
+ * jsm_cleanup_board()
+ *
+ * Free all the memory associated with a board
+ */
+static void jsm_cleanup_board(struct jsm_board *brd)
+{
+ int i = 0;
+
+ free_irq(brd->irq, brd);
+ iounmap(brd->re_map_membase);
+
+ /* Free all allocated channels structs */
+ for (i = 0; i < brd->maxports; i++) {
+ if (brd->channels[i]) {
+ if (brd->channels[i]->ch_rqueue)
+ kfree(brd->channels[i]->ch_rqueue);
+ if (brd->channels[i]->ch_equeue)
+ kfree(brd->channels[i]->ch_equeue);
+ if (brd->channels[i]->ch_wqueue)
+ kfree(brd->channels[i]->ch_wqueue);
+ kfree(brd->channels[i]);
+ }
+ }
+
+ pci_release_regions(brd->pci_dev);
+ pci_disable_device(brd->pci_dev);
+ kfree(brd->flipbuf);
+ kfree(brd);
+}
+
+static void jsm_remove_one(struct pci_dev *dev)
+{
+ unsigned long lock_flags;
+ struct list_head *tmp;
+ struct jsm_board *brd;
+
+ spin_lock_irqsave(&jsm_board_head_lock, lock_flags);
+ list_for_each(tmp, &jsm_board_head) {
+ brd = list_entry(tmp, struct jsm_board,
+ jsm_board_entry);
+ if ( brd != NULL && brd->pci_dev == dev) {
+ jsm_remove_uart_port(brd);
+ jsm_cleanup_board(brd);
+ list_del(&brd->jsm_board_entry);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags);
+ return;
+}
+
+struct pci_driver jsm_driver = {
+ .name = "jsm",
+ .probe = jsm_init_one,
+ .id_table = jsm_pci_tbl,
+ .remove = __devexit_p(jsm_remove_one),
+};
+
+/*
+ * jsm_init_module()
+ *
+ * Module load. This is where it all starts.
+ */
+static int __init jsm_init_module(void)
+{
+ int rc = 0;
+
+ printk(KERN_INFO "%s, Digi International Part Number %s\n",
+ JSM_VERSION, JSM_VERSION);
+
+ /*
+ * Initialize global stuff
+ */
+
+ rc = uart_register_driver(&jsm_uart_driver);
+ if (rc < 0) {
+ return rc;
+ }
+
+ rc = pci_register_driver(&jsm_driver);
+ if (rc < 0) {
+ uart_unregister_driver(&jsm_uart_driver);
+ return rc;
+ }
+ jsm_driver_state = DRIVER_READY;
+
+ return rc;
+}
+
+module_init(jsm_init_module);
+
+/*
+ * jsm_exit_module()
+ *
+ * Module unload. This is where it all ends.
+ */
+static void __exit jsm_exit_module(void)
+{
+ jsm_remove_driver_sysfiles(&jsm_driver.driver);
+
+ pci_unregister_driver(&jsm_driver);
+
+ uart_unregister_driver(&jsm_uart_driver);
+}
+module_exit(jsm_exit_module);
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
new file mode 100644
index 000000000000..9b79c1ff6c72
--- /dev/null
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -0,0 +1,1427 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/delay.h> /* For udelay */
+#include <linux/serial_reg.h> /* For the various UART offsets */
+#include <linux/tty.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include "jsm.h" /* Driver main header file */
+
+static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+
+/*
+ * This function allows calls to ensure that all outstanding
+ * PCI writes have been completed, by doing a PCI read against
+ * a non-destructive, read-only location on the Neo card.
+ *
+ * In this case, we are reading the DVID (Read-only Device Identification)
+ * value of the Neo card.
+ */
+static inline void neo_pci_posting_flush(struct jsm_board *bd)
+{
+ readb(bd->re_map_membase + 0x8D);
+}
+
+static void neo_set_cts_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
+
+ /* Turn on auto CTS flow control */
+ ier |= (UART_17158_IER_CTSDSR);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR);
+
+ /* Turn off auto Xon flow control */
+ efr &= ~(UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+
+ /* Feed the UART our trigger levels */
+ writeb(8, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 8;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_rts_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
+
+ /* Turn on auto RTS flow control */
+ ier |= (UART_17158_IER_RTSDTR);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR);
+
+ /* Turn off auto Xoff flow control */
+ ier &= ~(UART_17158_IER_XOFF);
+ efr &= ~(UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+ ch->ch_r_watermark = 4;
+
+ writeb(56, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 56;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+
+ /*
+ * From the Neo UART spec sheet:
+ * The auto RTS/DTR function must be started by asserting
+ * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after
+ * it is enabled.
+ */
+ ch->ch_mostat |= (UART_MCR_RTS);
+}
+
+
+static void neo_set_ixon_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
+
+ /* Turn off auto CTS flow control */
+ ier &= ~(UART_17158_IER_CTSDSR);
+ efr &= ~(UART_17158_EFR_CTSDSR);
+
+ /* Turn on auto Xon flow control */
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+ ch->ch_r_watermark = 4;
+
+ writeb(32, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 32;
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
+
+ /* Turn off auto RTS flow control */
+ ier &= ~(UART_17158_IER_RTSDTR);
+ efr &= ~(UART_17158_EFR_RTSDTR);
+
+ /* Turn on auto Xoff flow control */
+ ier |= (UART_17158_IER_XOFF);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ writeb(8, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 8;
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_no_input_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
+
+ /* Turn off auto RTS flow control */
+ ier &= ~(UART_17158_IER_RTSDTR);
+ efr &= ~(UART_17158_EFR_RTSDTR);
+
+ /* Turn off auto Xoff flow control */
+ ier &= ~(UART_17158_IER_XOFF);
+ if (ch->ch_c_iflag & IXON)
+ efr &= ~(UART_17158_EFR_IXOFF);
+ else
+ efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ ch->ch_r_watermark = 0;
+
+ writeb(16, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 16;
+
+ writeb(16, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 16;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_no_output_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
+
+ /* Turn off auto CTS flow control */
+ ier &= ~(UART_17158_IER_CTSDSR);
+ efr &= ~(UART_17158_EFR_CTSDSR);
+
+ /* Turn off auto Xon flow control */
+ if (ch->ch_c_iflag & IXOFF)
+ efr &= ~(UART_17158_EFR_IXON);
+ else
+ efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ ch->ch_r_watermark = 0;
+
+ writeb(16, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 16;
+
+ writeb(16, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 16;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch)
+{
+
+ /* if hardware flow control is set, then skip this whole thing */
+ if (ch->ch_c_cflag & CRTSCTS)
+ return;
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+}
+
+static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
+{
+ int qleft = 0;
+ u8 linestatus = 0;
+ u8 error_mask = 0;
+ int n = 0;
+ int total = 0;
+ u16 head;
+ u16 tail;
+
+ if (!ch)
+ return;
+
+ /* cache head and tail of queue */
+ head = ch->ch_r_head & RQUEUEMASK;
+ tail = ch->ch_r_tail & RQUEUEMASK;
+
+ /* Get our cached LSR */
+ linestatus = ch->ch_cached_lsr;
+ ch->ch_cached_lsr = 0;
+
+ /* Store how much space we have left in the queue */
+ if ((qleft = tail - head - 1) < 0)
+ qleft += RQUEUEMASK + 1;
+
+ /*
+ * If the UART is not in FIFO mode, force the FIFO copy to
+ * NOT be run, by setting total to 0.
+ *
+ * On the other hand, if the UART IS in FIFO mode, then ask
+ * the UART to give us an approximation of data it has RX'ed.
+ */
+ if (!(ch->ch_flags & CH_FIFO_ENABLED))
+ total = 0;
+ else {
+ total = readb(&ch->ch_neo_uart->rfifo);
+
+ /*
+ * EXAR chip bug - RX FIFO COUNT - Fudge factor.
+ *
+ * This resolves a problem/bug with the Exar chip that sometimes
+ * returns a bogus value in the rfifo register.
+ * The count can be any where from 0-3 bytes "off".
+ * Bizarre, but true.
+ */
+ total -= 3;
+ }
+
+ /*
+ * Finally, bound the copy to make sure we don't overflow
+ * our own queue...
+ * The byte by byte copy loop below this loop this will
+ * deal with the queue overflow possibility.
+ */
+ total = min(total, qleft);
+
+ while (total > 0) {
+ /*
+ * Grab the linestatus register, we need to check
+ * to see if there are any errors in the FIFO.
+ */
+ linestatus = readb(&ch->ch_neo_uart->lsr);
+
+ /*
+ * Break out if there is a FIFO error somewhere.
+ * This will allow us to go byte by byte down below,
+ * finding the exact location of the error.
+ */
+ if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
+ break;
+
+ /* Make sure we don't go over the end of our queue */
+ n = min(((u32) total), (RQUEUESIZE - (u32) head));
+
+ /*
+ * Cut down n even further if needed, this is to fix
+ * a problem with memcpy_fromio() with the Neo on the
+ * IBM pSeries platform.
+ * 15 bytes max appears to be the magic number.
+ */
+ n = min((u32) n, (u32) 12);
+
+ /*
+ * Since we are grabbing the linestatus register, which
+ * will reset some bits after our read, we need to ensure
+ * we don't miss our TX FIFO emptys.
+ */
+ if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR))
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+
+ linestatus = 0;
+
+ /* Copy data from uart to the queue */
+ memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+ /*
+ * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+ * that all the data currently in the FIFO is free of
+ * breaks and parity/frame/orun errors.
+ */
+ memset(ch->ch_equeue + head, 0, n);
+
+ /* Add to and flip head if needed */
+ head = (head + n) & RQUEUEMASK;
+ total -= n;
+ qleft -= n;
+ ch->ch_rxcount += n;
+ }
+
+ /*
+ * Create a mask to determine whether we should
+ * insert the character (if any) into our queue.
+ */
+ if (ch->ch_c_iflag & IGNBRK)
+ error_mask |= UART_LSR_BI;
+
+ /*
+ * Now cleanup any leftover bytes still in the UART.
+ * Also deal with any possible queue overflow here as well.
+ */
+ while (1) {
+
+ /*
+ * Its possible we have a linestatus from the loop above
+ * this, so we "OR" on any extra bits.
+ */
+ linestatus |= readb(&ch->ch_neo_uart->lsr);
+
+ /*
+ * If the chip tells us there is no more data pending to
+ * be read, we can then leave.
+ * But before we do, cache the linestatus, just in case.
+ */
+ if (!(linestatus & UART_LSR_DR)) {
+ ch->ch_cached_lsr = linestatus;
+ break;
+ }
+
+ /* No need to store this bit */
+ linestatus &= ~UART_LSR_DR;
+
+ /*
+ * Since we are grabbing the linestatus register, which
+ * will reset some bits after our read, we need to ensure
+ * we don't miss our TX FIFO emptys.
+ */
+ if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) {
+ linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ }
+
+ /*
+ * Discard character if we are ignoring the error mask.
+ */
+ if (linestatus & error_mask) {
+ u8 discard;
+ linestatus = 0;
+ memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1);
+ continue;
+ }
+
+ /*
+ * If our queue is full, we have no choice but to drop some data.
+ * The assumption is that HWFLOW or SWFLOW should have stopped
+ * things way way before we got to this point.
+ *
+ * I decided that I wanted to ditch the oldest data first,
+ * I hope thats okay with everyone? Yes? Good.
+ */
+ while (qleft < 1) {
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Queue full, dropping DATA:%x LSR:%x\n",
+ ch->ch_rqueue[tail], ch->ch_equeue[tail]);
+
+ ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+ ch->ch_err_overrun++;
+ qleft++;
+ }
+
+ memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
+ ch->ch_equeue[head] = (u8) linestatus;
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]);
+
+ /* Ditch any remaining linestatus value. */
+ linestatus = 0;
+
+ /* Add to and flip head if needed */
+ head = (head + 1) & RQUEUEMASK;
+
+ qleft--;
+ ch->ch_rxcount++;
+ }
+
+ /*
+ * Write new final heads to channel structure.
+ */
+ ch->ch_r_head = head & RQUEUEMASK;
+ ch->ch_e_head = head & EQUEUEMASK;
+ jsm_input(ch);
+}
+
+static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
+{
+ u16 head;
+ u16 tail;
+ int n;
+ int s;
+ int qlen;
+ u32 len_written = 0;
+
+ if (!ch)
+ return;
+
+ /* No data to write to the UART */
+ if (ch->ch_w_tail == ch->ch_w_head)
+ return;
+
+ /* If port is "stopped", don't send any data to the UART */
+ if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING))
+ return;
+ /*
+ * If FIFOs are disabled. Send data directly to txrx register
+ */
+ if (!(ch->ch_flags & CH_FIFO_ENABLED)) {
+ u8 lsrbits = readb(&ch->ch_neo_uart->lsr);
+
+ ch->ch_cached_lsr |= lsrbits;
+ if (ch->ch_cached_lsr & UART_LSR_THRE) {
+ ch->ch_cached_lsr &= ~(UART_LSR_THRE);
+
+ writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+ jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
+ "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]);
+ ch->ch_w_tail++;
+ ch->ch_w_tail &= WQUEUEMASK;
+ ch->ch_txcount++;
+ }
+ return;
+ }
+
+ /*
+ * We have to do it this way, because of the EXAR TXFIFO count bug.
+ */
+ if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
+ return;
+
+ len_written = 0;
+ n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel;
+
+ /* cache head and tail of queue */
+ head = ch->ch_w_head & WQUEUEMASK;
+ tail = ch->ch_w_tail & WQUEUEMASK;
+ qlen = (head - tail) & WQUEUEMASK;
+
+ /* Find minimum of the FIFO space, versus queue length */
+ n = min(n, qlen);
+
+ while (n > 0) {
+
+ s = ((head >= tail) ? head : WQUEUESIZE) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+ /* Add and flip queue if needed */
+ tail = (tail + s) & WQUEUEMASK;
+ n -= s;
+ ch->ch_txcount += s;
+ len_written += s;
+ }
+
+ /* Update the final tail */
+ ch->ch_w_tail = tail & WQUEUEMASK;
+
+ if (len_written >= ch->ch_t_tlevel)
+ ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+
+ if (!jsm_tty_write(&ch->uart_port))
+ uart_write_wakeup(&ch->uart_port);
+}
+
+static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
+{
+ u8 msignals = signals;
+
+ jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
+ "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
+
+ if (!ch)
+ return;
+
+ /* Scrub off lower bits. They signify delta's, which I don't care about */
+ msignals &= 0xf0;
+
+ if (msignals & UART_MSR_DCD)
+ ch->ch_mistat |= UART_MSR_DCD;
+ else
+ ch->ch_mistat &= ~UART_MSR_DCD;
+
+ if (msignals & UART_MSR_DSR)
+ ch->ch_mistat |= UART_MSR_DSR;
+ else
+ ch->ch_mistat &= ~UART_MSR_DSR;
+
+ if (msignals & UART_MSR_RI)
+ ch->ch_mistat |= UART_MSR_RI;
+ else
+ ch->ch_mistat &= ~UART_MSR_RI;
+
+ if (msignals & UART_MSR_CTS)
+ ch->ch_mistat |= UART_MSR_CTS;
+ else
+ ch->ch_mistat &= ~UART_MSR_CTS;
+
+ jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
+ "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
+ ch->ch_portnum,
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD));
+}
+
+/* Make the UART raise any of the output signals we want up */
+static void neo_assert_modem_signals(struct jsm_channel *ch)
+{
+ u8 out;
+
+ if (!ch)
+ return;
+
+ out = ch->ch_mostat;
+
+ writeb(out, &ch->ch_neo_uart->mcr);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+/*
+ * Flush the WRITE FIFO on the Neo.
+ *
+ * NOTE: Channel lock MUST be held before calling this function!
+ */
+static void neo_flush_uart_write(struct jsm_channel *ch)
+{
+ u8 tmp = 0;
+ int i = 0;
+
+ if (!ch)
+ return;
+
+ writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+
+ for (i = 0; i < 10; i++) {
+
+ /* Check to see if the UART feels it completely flushed the FIFO. */
+ tmp = readb(&ch->ch_neo_uart->isr_fcr);
+ if (tmp & 4) {
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "Still flushing TX UART... i: %d\n", i);
+ udelay(10);
+ }
+ else
+ break;
+ }
+
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+}
+
+
+/*
+ * Flush the READ FIFO on the Neo.
+ *
+ * NOTE: Channel lock MUST be held before calling this function!
+ */
+static void neo_flush_uart_read(struct jsm_channel *ch)
+{
+ u8 tmp = 0;
+ int i = 0;
+
+ if (!ch)
+ return;
+
+ writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr);
+
+ for (i = 0; i < 10; i++) {
+
+ /* Check to see if the UART feels it completely flushed the FIFO. */
+ tmp = readb(&ch->ch_neo_uart->isr_fcr);
+ if (tmp & 2) {
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "Still flushing RX UART... i: %d\n", i);
+ udelay(10);
+ }
+ else
+ break;
+ }
+}
+
+/*
+ * No locks are assumed to be held when calling this function.
+ */
+void neo_clear_break(struct jsm_channel *ch, int force)
+{
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ /* Turn break off, and unset some variables */
+ if (ch->ch_flags & CH_BREAK_SENDING) {
+ u8 temp = readb(&ch->ch_neo_uart->lcr);
+ writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr);
+
+ ch->ch_flags &= ~(CH_BREAK_SENDING);
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+}
+
+/*
+ * Parse the ISR register.
+ */
+static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
+{
+ struct jsm_channel *ch;
+ u8 isr;
+ u8 cause;
+ unsigned long lock_flags;
+
+ if (!brd)
+ return;
+
+ if (port > brd->maxports)
+ return;
+
+ ch = brd->channels[port];
+ if (!ch)
+ return;
+
+ /* Here we try to figure out what caused the interrupt to happen */
+ while (1) {
+
+ isr = readb(&ch->ch_neo_uart->isr_fcr);
+
+ /* Bail if no pending interrupt */
+ if (isr & UART_IIR_NO_INT)
+ break;
+
+ /*
+ * Yank off the upper 2 bits, which just show that the FIFO's are enabled.
+ */
+ isr &= ~(UART_17158_IIR_FIFO_ENABLED);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "%s:%d isr: %x\n", __FILE__, __LINE__, isr);
+
+ if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) {
+ /* Read data from uart -> queue */
+ neo_copy_data_from_uart_to_queue(ch);
+
+ /* Call our tty layer to enforce queue flow control if needed. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ if (isr & UART_IIR_THRI) {
+ /* Transfer data (if any) from Write Queue -> UART. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+
+ if (isr & UART_17158_IIR_XONXOFF) {
+ cause = readb(&ch->ch_neo_uart->xoffchar1);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause);
+
+ /*
+ * Since the UART detected either an XON or
+ * XOFF match, we need to figure out which
+ * one it was, so we can suspend or resume data flow.
+ */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ if (cause == UART_17158_XON_DETECT) {
+ /* Is output stopped right now, if so, resume it */
+ if (brd->channels[port]->ch_flags & CH_STOP) {
+ ch->ch_flags &= ~(CH_STOP);
+ }
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port %d. XON detected in incoming data\n", port);
+ }
+ else if (cause == UART_17158_XOFF_DETECT) {
+ if (!(brd->channels[port]->ch_flags & CH_STOP)) {
+ ch->ch_flags |= CH_STOP;
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Setting CH_STOP\n");
+ }
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port: %d. XOFF detected in incoming data\n", port);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) {
+ /*
+ * If we get here, this means the hardware is doing auto flow control.
+ * Check to see whether RTS/DTR or CTS/DSR caused this interrupt.
+ */
+ cause = readb(&ch->ch_neo_uart->mcr);
+
+ /* Which pin is doing auto flow? RTS or DTR? */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ if ((cause & 0x4) == 0) {
+ if (cause & UART_MCR_RTS)
+ ch->ch_mostat |= UART_MCR_RTS;
+ else
+ ch->ch_mostat &= ~(UART_MCR_RTS);
+ } else {
+ if (cause & UART_MCR_DTR)
+ ch->ch_mostat |= UART_MCR_DTR;
+ else
+ ch->ch_mostat &= ~(UART_MCR_DTR);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ /* Parse any modem signal changes */
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "MOD_STAT: sending to parse_modem_sigs\n");
+ neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ }
+}
+
+static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
+{
+ struct jsm_channel *ch;
+ int linestatus;
+ unsigned long lock_flags;
+
+ if (!brd)
+ return;
+
+ if (port > brd->maxports)
+ return;
+
+ ch = brd->channels[port];
+ if (!ch)
+ return;
+
+ linestatus = readb(&ch->ch_neo_uart->lsr);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus);
+
+ ch->ch_cached_lsr |= linestatus;
+
+ if (ch->ch_cached_lsr & UART_LSR_DR) {
+ /* Read data from uart -> queue */
+ neo_copy_data_from_uart_to_queue(ch);
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ /*
+ * This is a special flag. It indicates that at least 1
+ * RX error (parity, framing, or break) has happened.
+ * Mark this in our struct, which will tell me that I have
+ *to do the special RX+LSR read for this FIFO load.
+ */
+ if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d Got an RX error, need to parse LSR\n",
+ __FILE__, __LINE__, port);
+
+ /*
+ * The next 3 tests should *NOT* happen, as the above test
+ * should encapsulate all 3... At least, thats what Exar says.
+ */
+
+ if (linestatus & UART_LSR_PE) {
+ ch->ch_err_parity++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_FE) {
+ ch->ch_err_frame++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_BI) {
+ ch->ch_err_break++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_OE) {
+ /*
+ * Rx Oruns. Exar says that an orun will NOT corrupt
+ * the FIFO. It will just replace the holding register
+ * with this new data byte. So basically just ignore this.
+ * Probably we should eventually have an orun stat in our driver...
+ */
+ ch->ch_err_overrun++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_THRE) {
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ /* Transfer data (if any) from Write Queue -> UART. */
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+ else if (linestatus & UART_17158_TX_AND_FIFO_CLR) {
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ /* Transfer data (if any) from Write Queue -> UART. */
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+}
+
+/*
+ * neo_param()
+ * Send any/all changes to the line to the UART.
+ */
+static void neo_param(struct jsm_channel *ch)
+{
+ u8 lcr = 0;
+ u8 uart_lcr = 0;
+ u8 ier = 0;
+ u32 baud = 9600;
+ int quot = 0;
+ struct jsm_board *bd;
+
+ bd = ch->ch_bd;
+ if (!bd)
+ return;
+
+ /*
+ * If baud rate is zero, flush queues, and set mval to drop DTR.
+ */
+ if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+ ch->ch_r_head = ch->ch_r_tail = 0;
+ ch->ch_e_head = ch->ch_e_tail = 0;
+ ch->ch_w_head = ch->ch_w_tail = 0;
+
+ neo_flush_uart_write(ch);
+ neo_flush_uart_read(ch);
+
+ ch->ch_flags |= (CH_BAUD0);
+ ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
+ neo_assert_modem_signals(ch);
+ ch->ch_old_baud = 0;
+ return;
+
+ } else if (ch->ch_custom_speed) {
+ baud = ch->ch_custom_speed;
+ if (ch->ch_flags & CH_BAUD0)
+ ch->ch_flags &= ~(CH_BAUD0);
+ } else {
+ int iindex = 0;
+ int jindex = 0;
+
+ const u64 bauds[4][16] = {
+ {
+ 0, 50, 75, 110,
+ 134, 150, 200, 300,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 76800, 115200,
+ 131657, 153600, 230400, 460800,
+ 921600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 }
+ };
+
+ baud = C_BAUD(ch->uart_port.info->tty) & 0xff;
+
+ if (ch->ch_c_cflag & CBAUDEX)
+ iindex = 1;
+
+ jindex = baud;
+
+ if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+ baud = bauds[iindex][jindex];
+ else {
+ jsm_printk(IOCTL, DEBUG, &ch->ch_bd->pci_dev,
+ "baud indices were out of range (%d)(%d)",
+ iindex, jindex);
+ baud = 0;
+ }
+
+ if (baud == 0)
+ baud = 9600;
+
+ if (ch->ch_flags & CH_BAUD0)
+ ch->ch_flags &= ~(CH_BAUD0);
+ }
+
+ if (ch->ch_c_cflag & PARENB)
+ lcr |= UART_LCR_PARITY;
+
+ if (!(ch->ch_c_cflag & PARODD))
+ lcr |= UART_LCR_EPAR;
+
+ /*
+ * Not all platforms support mark/space parity,
+ * so this will hide behind an ifdef.
+ */
+#ifdef CMSPAR
+ if (ch->ch_c_cflag & CMSPAR)
+ lcr |= UART_LCR_SPAR;
+#endif
+
+ if (ch->ch_c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+
+ switch (ch->ch_c_cflag & CSIZE) {
+ case CS5:
+ lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr |= UART_LCR_WLEN7;
+ break;
+ case CS8:
+ default:
+ lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ ier = readb(&ch->ch_neo_uart->ier);
+ uart_lcr = readb(&ch->ch_neo_uart->lcr);
+
+ if (baud == 0)
+ baud = 9600;
+
+ quot = ch->ch_bd->bd_dividend / baud;
+
+ if (quot != 0) {
+ ch->ch_old_baud = baud;
+ writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr);
+ writeb((quot & 0xff), &ch->ch_neo_uart->txrx);
+ writeb((quot >> 8), &ch->ch_neo_uart->ier);
+ writeb(lcr, &ch->ch_neo_uart->lcr);
+ }
+
+ if (uart_lcr != lcr)
+ writeb(lcr, &ch->ch_neo_uart->lcr);
+
+ if (ch->ch_c_cflag & CREAD)
+ ier |= (UART_IER_RDI | UART_IER_RLSI);
+
+ ier |= (UART_IER_THRI | UART_IER_MSI);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+
+ /* Set new start/stop chars */
+ neo_set_new_start_stop_chars(ch);
+
+ if (ch->ch_c_cflag & CRTSCTS)
+ neo_set_cts_flow_control(ch);
+ else if (ch->ch_c_iflag & IXON) {
+ /* If start/stop is set to disable, then we should disable flow control */
+ if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR))
+ neo_set_no_output_flow_control(ch);
+ else
+ neo_set_ixon_flow_control(ch);
+ }
+ else
+ neo_set_no_output_flow_control(ch);
+
+ if (ch->ch_c_cflag & CRTSCTS)
+ neo_set_rts_flow_control(ch);
+ else if (ch->ch_c_iflag & IXOFF) {
+ /* If start/stop is set to disable, then we should disable flow control */
+ if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR))
+ neo_set_no_input_flow_control(ch);
+ else
+ neo_set_ixoff_flow_control(ch);
+ }
+ else
+ neo_set_no_input_flow_control(ch);
+ /*
+ * Adjust the RX FIFO Trigger level if baud is less than 9600.
+ * Not exactly elegant, but this is needed because of the Exar chip's
+ * delay on firing off the RX FIFO interrupt on slower baud rates.
+ */
+ if (baud < 9600) {
+ writeb(1, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 1;
+ }
+
+ neo_assert_modem_signals(ch);
+
+ /* Get current status of the modem signals now */
+ neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ return;
+}
+
+/*
+ * jsm_neo_intr()
+ *
+ * Neo specific interrupt handler.
+ */
+static irqreturn_t neo_intr(int irq, void *voidbrd, struct pt_regs *regs)
+{
+ struct jsm_board *brd = (struct jsm_board *) voidbrd;
+ struct jsm_channel *ch;
+ int port = 0;
+ int type = 0;
+ int current_port;
+ u32 tmp;
+ u32 uart_poll;
+ unsigned long lock_flags;
+ unsigned long lock_flags2;
+ int outofloop_count = 0;
+
+ brd->intr_count++;
+
+ /* Lock out the slow poller from running on this board. */
+ spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
+
+ /*
+ * Read in "extended" IRQ information from the 32bit Neo register.
+ * Bits 0-7: What port triggered the interrupt.
+ * Bits 8-31: Each 3bits indicate what type of interrupt occurred.
+ */
+ uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET);
+
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll);
+
+ if (!uart_poll) {
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "Kernel interrupted to me, but no pending interrupts...\n");
+ spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
+ return IRQ_NONE;
+ }
+
+ /* At this point, we have at least SOMETHING to service, dig further... */
+
+ current_port = 0;
+
+ /* Loop on each port */
+ while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){
+
+ tmp = uart_poll;
+ outofloop_count++;
+
+ /* Check current port to see if it has interrupt pending */
+ if ((tmp & jsm_offset_table[current_port]) != 0) {
+ port = current_port;
+ type = tmp >> (8 + (port * 3));
+ type &= 0x7;
+ } else {
+ current_port++;
+ continue;
+ }
+
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type);
+
+ /* Remove this port + type from uart_poll */
+ uart_poll &= ~(jsm_offset_table[port]);
+
+ if (!type) {
+ /* If no type, just ignore it, and move onto next port */
+ jsm_printk(INTR, ERR, &brd->pci_dev,
+ "Interrupt with no type! port: %d\n", port);
+ continue;
+ }
+
+ /* Switch on type of interrupt we have */
+ switch (type) {
+
+ case UART_17158_RXRDY_TIMEOUT:
+ /*
+ * RXRDY Time-out is cleared by reading data in the
+ * RX FIFO until it falls below the trigger level.
+ */
+
+ /* Verify the port is in range. */
+ if (port > brd->nasync)
+ continue;
+
+ ch = brd->channels[port];
+ neo_copy_data_from_uart_to_queue(ch);
+
+ /* Call our tty layer to enforce queue flow control if needed. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+
+ continue;
+
+ case UART_17158_RX_LINE_STATUS:
+ /*
+ * RXRDY and RX LINE Status (logic OR of LSR[4:1])
+ */
+ neo_parse_lsr(brd, port);
+ continue;
+
+ case UART_17158_TXRDY:
+ /*
+ * TXRDY interrupt clears after reading ISR register for the UART channel.
+ */
+
+ /*
+ * Yes, this is odd...
+ * Why would I check EVERY possibility of type of
+ * interrupt, when we know its TXRDY???
+ * Becuz for some reason, even tho we got triggered for TXRDY,
+ * it seems to be occassionally wrong. Instead of TX, which
+ * it should be, I was getting things like RXDY too. Weird.
+ */
+ neo_parse_isr(brd, port);
+ continue;
+
+ case UART_17158_MSR:
+ /*
+ * MSR or flow control was seen.
+ */
+ neo_parse_isr(brd, port);
+ continue;
+
+ default:
+ /*
+ * The UART triggered us with a bogus interrupt type.
+ * It appears the Exar chip, when REALLY bogged down, will throw
+ * these once and awhile.
+ * Its harmless, just ignore it and move on.
+ */
+ jsm_printk(INTR, ERR, &brd->pci_dev,
+ "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type);
+ continue;
+ }
+ }
+
+ spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
+
+ jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n");
+ return IRQ_HANDLED;
+}
+
+/*
+ * Neo specific way of turning off the receiver.
+ * Used as a way to enforce queue flow control when in
+ * hardware flow control mode.
+ */
+static void neo_disable_receiver(struct jsm_channel *ch)
+{
+ u8 tmp = readb(&ch->ch_neo_uart->ier);
+ tmp &= ~(UART_IER_RDI);
+ writeb(tmp, &ch->ch_neo_uart->ier);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+
+/*
+ * Neo specific way of turning on the receiver.
+ * Used as a way to un-enforce queue flow control when in
+ * hardware flow control mode.
+ */
+static void neo_enable_receiver(struct jsm_channel *ch)
+{
+ u8 tmp = readb(&ch->ch_neo_uart->ier);
+ tmp |= (UART_IER_RDI);
+ writeb(tmp, &ch->ch_neo_uart->ier);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+static void neo_send_start_character(struct jsm_channel *ch)
+{
+ if (!ch)
+ return;
+
+ if (ch->ch_startc != __DISABLED_CHAR) {
+ ch->ch_xon_sends++;
+ writeb(ch->ch_startc, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+static void neo_send_stop_character(struct jsm_channel *ch)
+{
+ if (!ch)
+ return;
+
+ if (ch->ch_stopc != __DISABLED_CHAR) {
+ ch->ch_xoff_sends++;
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+/*
+ * neo_uart_init
+ */
+static void neo_uart_init(struct jsm_channel *ch)
+{
+ writeb(0, &ch->ch_neo_uart->ier);
+ writeb(0, &ch->ch_neo_uart->efr);
+ writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr);
+
+ /* Clear out UART and FIFO */
+ readb(&ch->ch_neo_uart->txrx);
+ writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+ readb(&ch->ch_neo_uart->lsr);
+ readb(&ch->ch_neo_uart->msr);
+
+ ch->ch_flags |= CH_FIFO_ENABLED;
+
+ /* Assert any signals we want up */
+ writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr);
+}
+
+/*
+ * Make the UART completely turn off.
+ */
+static void neo_uart_off(struct jsm_channel *ch)
+{
+ /* Turn off UART enhanced bits */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Stop all interrupts from occurring. */
+ writeb(0, &ch->ch_neo_uart->ier);
+}
+
+static u32 neo_get_uart_bytes_left(struct jsm_channel *ch)
+{
+ u8 left = 0;
+ u8 lsr = readb(&ch->ch_neo_uart->lsr);
+
+ /* We must cache the LSR as some of the bits get reset once read... */
+ ch->ch_cached_lsr |= lsr;
+
+ /* Determine whether the Transmitter is empty or not */
+ if (!(lsr & UART_LSR_TEMT))
+ left = 1;
+ else {
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ left = 0;
+ }
+
+ return left;
+}
+
+/* Channel lock MUST be held by the calling function! */
+static void neo_send_break(struct jsm_channel *ch)
+{
+ /*
+ * Set the time we should stop sending the break.
+ * If we are already sending a break, toss away the existing
+ * time to stop, and use this new value instead.
+ */
+
+ /* Tell the UART to start sending the break */
+ if (!(ch->ch_flags & CH_BREAK_SENDING)) {
+ u8 temp = readb(&ch->ch_neo_uart->lcr);
+ writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr);
+ ch->ch_flags |= (CH_BREAK_SENDING);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+/*
+ * neo_send_immediate_char.
+ *
+ * Sends a specific character as soon as possible to the UART,
+ * jumping over any bytes that might be in the write queue.
+ *
+ * The channel lock MUST be held by the calling function.
+ */
+static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c)
+{
+ if (!ch)
+ return;
+
+ writeb(c, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+struct board_ops jsm_neo_ops = {
+ .intr = neo_intr,
+ .uart_init = neo_uart_init,
+ .uart_off = neo_uart_off,
+ .param = neo_param,
+ .assert_modem_signals = neo_assert_modem_signals,
+ .flush_uart_write = neo_flush_uart_write,
+ .flush_uart_read = neo_flush_uart_read,
+ .disable_receiver = neo_disable_receiver,
+ .enable_receiver = neo_enable_receiver,
+ .send_break = neo_send_break,
+ .clear_break = neo_clear_break,
+ .send_start_character = neo_send_start_character,
+ .send_stop_character = neo_send_stop_character,
+ .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart,
+ .get_uart_bytes_left = neo_get_uart_bytes_left,
+ .send_immediate_char = neo_send_immediate_char
+};
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
new file mode 100644
index 000000000000..7fb7cc07074b
--- /dev/null
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -0,0 +1,1038 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/delay.h> /* For udelay */
+#include <linux/pci.h>
+
+#include "jsm.h"
+
+static inline int jsm_get_mstat(struct jsm_channel *ch)
+{
+ unsigned char mstat;
+ unsigned result;
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ mstat = (ch->ch_mostat | ch->ch_mistat);
+
+ result = 0;
+
+ if (mstat & UART_MCR_DTR)
+ result |= TIOCM_DTR;
+ if (mstat & UART_MCR_RTS)
+ result |= TIOCM_RTS;
+ if (mstat & UART_MSR_CTS)
+ result |= TIOCM_CTS;
+ if (mstat & UART_MSR_DSR)
+ result |= TIOCM_DSR;
+ if (mstat & UART_MSR_RI)
+ result |= TIOCM_RI;
+ if (mstat & UART_MSR_DCD)
+ result |= TIOCM_CD;
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+ return result;
+}
+
+static unsigned int jsm_tty_tx_empty(struct uart_port *port)
+{
+ return TIOCSER_TEMT;
+}
+
+/*
+ * Return modem signals to ld.
+ */
+static unsigned int jsm_tty_get_mctrl(struct uart_port *port)
+{
+ int result;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ result = jsm_get_mstat(channel);
+
+ if (result < 0)
+ return -ENXIO;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+
+ return result;
+}
+
+/*
+ * jsm_set_modem_info()
+ *
+ * Set modem signals, called by ld.
+ */
+static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ if (mctrl & TIOCM_RTS)
+ channel->ch_mostat |= UART_MCR_RTS;
+ else
+ channel->ch_mostat &= ~UART_MCR_RTS;
+
+ if (mctrl & TIOCM_DTR)
+ channel->ch_mostat |= UART_MCR_DTR;
+ else
+ channel->ch_mostat &= ~UART_MCR_DTR;
+
+ channel->ch_bd->bd_ops->assert_modem_signals(channel);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ udelay(10);
+}
+
+static void jsm_tty_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ channel->ch_flags &= ~(CH_STOP);
+ jsm_tty_write(port);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ channel->ch_flags |= (CH_STOP);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_send_xchar(struct uart_port *port, char ch)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (ch == port->info->tty->termios->c_cc[VSTART])
+ channel->ch_bd->bd_ops->send_start_character(channel);
+
+ if (ch == port->info->tty->termios->c_cc[VSTOP])
+ channel->ch_bd->bd_ops->send_stop_character(channel);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static void jsm_tty_stop_rx(struct uart_port *port)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ channel->ch_bd->bd_ops->disable_receiver(channel);
+}
+
+static void jsm_tty_break(struct uart_port *port, int break_state)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (break_state == -1)
+ channel->ch_bd->bd_ops->send_break(channel);
+ else
+ channel->ch_bd->bd_ops->clear_break(channel, 0);
+
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static int jsm_tty_open(struct uart_port *port)
+{
+ struct jsm_board *brd;
+ int rc = 0;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ /* Get board pointer from our array of majors we have allocated */
+ brd = channel->ch_bd;
+
+ /*
+ * Allocate channel buffers for read/write/error.
+ * Set flag, so we don't get trounced on.
+ */
+ channel->ch_flags |= (CH_OPENING);
+
+ /* Drop locks, as malloc with GFP_KERNEL can sleep */
+
+ if (!channel->ch_rqueue) {
+ channel->ch_rqueue = (u8 *) kmalloc(RQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_rqueue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate read queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_rqueue, 0, RQUEUESIZE);
+ }
+ if (!channel->ch_equeue) {
+ channel->ch_equeue = (u8 *) kmalloc(EQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_equeue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate error queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_equeue, 0, EQUEUESIZE);
+ }
+ if (!channel->ch_wqueue) {
+ channel->ch_wqueue = (u8 *) kmalloc(WQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_wqueue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate write queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_wqueue, 0, WQUEUESIZE);
+ }
+
+ channel->ch_flags &= ~(CH_OPENING);
+ /*
+ * Initialize if neither terminal is open.
+ */
+ jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev,
+ "jsm_open: initializing channel in open...\n");
+
+ /*
+ * Flush input queues.
+ */
+ channel->ch_r_head = channel->ch_r_tail = 0;
+ channel->ch_e_head = channel->ch_e_tail = 0;
+ channel->ch_w_head = channel->ch_w_tail = 0;
+
+ brd->bd_ops->flush_uart_write(channel);
+ brd->bd_ops->flush_uart_read(channel);
+
+ channel->ch_flags = 0;
+ channel->ch_cached_lsr = 0;
+ channel->ch_stops_sent = 0;
+
+ channel->ch_c_cflag = port->info->tty->termios->c_cflag;
+ channel->ch_c_iflag = port->info->tty->termios->c_iflag;
+ channel->ch_c_oflag = port->info->tty->termios->c_oflag;
+ channel->ch_c_lflag = port->info->tty->termios->c_lflag;
+ channel->ch_startc = port->info->tty->termios->c_cc[VSTART];
+ channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+
+ /* Tell UART to init itself */
+ brd->bd_ops->uart_init(channel);
+
+ /*
+ * Run param in case we changed anything
+ */
+ brd->bd_ops->param(channel);
+
+ jsm_carrier(channel);
+
+ channel->ch_open_count++;
+
+ jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ return rc;
+}
+
+static void jsm_tty_close(struct uart_port *port)
+{
+ struct jsm_board *bd;
+ struct termios *ts;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ bd = channel->ch_bd;
+ ts = channel->uart_port.info->tty->termios;
+
+ channel->ch_flags &= ~(CH_STOPI);
+
+ channel->ch_open_count--;
+
+ /*
+ * If we have HUPCL set, lower DTR and RTS
+ */
+ if (channel->ch_c_cflag & HUPCL) {
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev,
+ "Close. HUPCL set, dropping DTR/RTS\n");
+
+ /* Drop RTS/DTR */
+ channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ bd->bd_ops->assert_modem_signals(channel);
+ }
+
+ channel->ch_old_baud = 0;
+
+ /* Turn off UART interrupts for this port */
+ channel->ch_bd->bd_ops->uart_off(channel);
+
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_set_termios(struct uart_port *port,
+ struct termios *termios,
+ struct termios *old_termios)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ channel->ch_c_cflag = termios->c_cflag;
+ channel->ch_c_iflag = termios->c_iflag;
+ channel->ch_c_oflag = termios->c_oflag;
+ channel->ch_c_lflag = termios->c_lflag;
+ channel->ch_startc = termios->c_cc[VSTART];
+ channel->ch_stopc = termios->c_cc[VSTOP];
+
+ channel->ch_bd->bd_ops->param(channel);
+ jsm_carrier(channel);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static const char *jsm_tty_type(struct uart_port *port)
+{
+ return "jsm";
+}
+
+static void jsm_tty_release_port(struct uart_port *port)
+{
+}
+
+static int jsm_tty_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void jsm_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_JSM;
+}
+
+static struct uart_ops jsm_ops = {
+ .tx_empty = jsm_tty_tx_empty,
+ .set_mctrl = jsm_tty_set_mctrl,
+ .get_mctrl = jsm_tty_get_mctrl,
+ .stop_tx = jsm_tty_stop_tx,
+ .start_tx = jsm_tty_start_tx,
+ .send_xchar = jsm_tty_send_xchar,
+ .stop_rx = jsm_tty_stop_rx,
+ .break_ctl = jsm_tty_break,
+ .startup = jsm_tty_open,
+ .shutdown = jsm_tty_close,
+ .set_termios = jsm_tty_set_termios,
+ .type = jsm_tty_type,
+ .release_port = jsm_tty_release_port,
+ .request_port = jsm_tty_request_port,
+ .config_port = jsm_config_port,
+};
+
+/*
+ * jsm_tty_init()
+ *
+ * Init the tty subsystem. Called once per board after board has been
+ * downloaded and init'ed.
+ */
+int jsm_tty_init(struct jsm_board *brd)
+{
+ int i;
+ void __iomem *vaddr;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /*
+ * Allocate channel memory that might not have been allocated
+ * when the driver was first loaded.
+ */
+ for (i = 0; i < brd->nasync; i++) {
+ if (!brd->channels[i]) {
+
+ /*
+ * Okay to malloc with GFP_KERNEL, we are not at
+ * interrupt context, and there are no locks held.
+ */
+ brd->channels[i] = kmalloc(sizeof(struct jsm_channel), GFP_KERNEL);
+ if (!brd->channels[i]) {
+ jsm_printk(CORE, ERR, &brd->pci_dev,
+ "%s:%d Unable to allocate memory for channel struct\n",
+ __FILE__, __LINE__);
+ }
+ memset(brd->channels[i], 0, sizeof(struct jsm_channel));
+ }
+ }
+
+ ch = brd->channels[0];
+ vaddr = brd->re_map_membase;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ spin_lock_init(&ch->ch_lock);
+
+ if (brd->bd_uart_offset == 0x200)
+ ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i);
+
+ ch->ch_bd = brd;
+ ch->ch_portnum = i;
+
+ /* .25 second delay */
+ ch->ch_close_delay = 250;
+
+ init_waitqueue_head(&ch->ch_flags_wait);
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+int jsm_uart_port_init(struct jsm_board *brd)
+{
+ int i;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.type = PORT_JSM;
+ brd->channels[i]->uart_port.iotype = UPIO_MEM;
+ brd->channels[i]->uart_port.membase = brd->re_map_membase;
+ brd->channels[i]->uart_port.fifosize = 16;
+ brd->channels[i]->uart_port.ops = &jsm_ops;
+ brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+ if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
+ printk(KERN_INFO "Added device failed\n");
+ else
+ printk(KERN_INFO "Added device \n");
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+int jsm_remove_uart_port(struct jsm_board *brd)
+{
+ int i;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++) {
+
+ if (!brd->channels[i])
+ continue;
+
+ ch = brd->channels[i];
+
+ uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+void jsm_input(struct jsm_channel *ch)
+{
+ struct jsm_board *bd;
+ struct tty_struct *tp;
+ u32 rmask;
+ u16 head;
+ u16 tail;
+ int data_len;
+ unsigned long lock_flags;
+ int flip_len;
+ int len = 0;
+ int n = 0;
+ char *buf = NULL;
+ char *buf2 = NULL;
+ int s = 0;
+ int i = 0;
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ if (!ch)
+ return;
+
+ tp = ch->uart_port.info->tty;
+
+ bd = ch->ch_bd;
+ if(!bd)
+ return;
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ /*
+ *Figure the number of characters in the buffer.
+ *Exit immediately if none.
+ */
+
+ rmask = RQUEUEMASK;
+
+ head = ch->ch_r_head & rmask;
+ tail = ch->ch_r_tail & rmask;
+
+ data_len = (head - tail) & rmask;
+ if (data_len == 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ /*
+ *If the device is not open, or CREAD is off, flush
+ *input data and return immediately.
+ */
+ if (!tp ||
+ !(tp->termios->c_cflag & CREAD) ) {
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
+ ch->ch_r_head = tail;
+
+ /* Force queue flow control to be released, if needed */
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ /*
+ * If we are throttled, simply don't read any data.
+ */
+ if (ch->ch_flags & CH_STOPI) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Port %d throttled, not reading any data. head: %x tail: %x\n",
+ ch->ch_portnum, head, tail);
+ return;
+ }
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
+
+ /*
+ * If the rxbuf is empty and we are not throttled, put as much
+ * as we can directly into the linux TTY flip buffer.
+ * The jsm_rawreadok case takes advantage of carnal knowledge that
+ * the char_buf and the flag_buf are next to each other and
+ * are each of (2 * TTY_FLIPBUF_SIZE) size.
+ *
+ * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
+ *actually still uses the flag buffer, so you can't
+ *use it for input data
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw)
+ flip_len = MYFLIPLEN;
+ else
+ flip_len = 2 * TTY_FLIPBUF_SIZE;
+ } else
+ flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+
+ len = min(data_len, flip_len);
+ len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+
+ if (len <= 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+ return;
+ }
+
+ /*
+ * If we're bypassing flip buffers on rx, we can blast it
+ * right into the beginning of the buffer.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "JSM - FLIPBUF in use. delaying input\n");
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+ ch->ch_flags |= CH_FLIPBUF_IN_USE;
+ buf = ch->ch_bd->flipbuf;
+ buf2 = NULL;
+ } else {
+ buf = tp->flip.char_buf;
+ buf2 = tp->flip.flag_buf;
+ }
+ } else {
+ buf = tp->flip.char_buf_ptr;
+ buf2 = tp->flip.flag_buf_ptr;
+ }
+
+ n = len;
+
+ /*
+ * n now contains the most amount of data we can copy,
+ * bounded either by the flip buffer size or the amount
+ * of data the card actually has pending...
+ */
+ while (n) {
+ s = ((head >= tail) ? head : RQUEUESIZE) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy(buf, ch->ch_rqueue + tail, s);
+
+ /* buf2 is only set when port isn't raw */
+ if (buf2)
+ memcpy(buf2, ch->ch_equeue + tail, s);
+
+ tail += s;
+ buf += s;
+ if (buf2)
+ buf2 += s;
+ n -= s;
+ /* Flip queue if needed */
+ tail &= rmask;
+ }
+
+ /*
+ * In high performance mode, we don't have to update
+ * flag_buf or any of the counts or pointers into flip buf.
+ */
+ if (!jsm_rawreadok) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else {
+ memset(tp->flip.flag_buf_ptr, 0, len);
+ }
+
+ tp->flip.char_buf_ptr += len;
+ tp->flip.flag_buf_ptr += len;
+ tp->flip.count += len;
+ }
+ else if (!tp->real_raw) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else
+ memset(tp->flip.flag_buf, 0, len);
+ }
+
+ /*
+ * If we're doing raw reads, jam it right into the
+ * line disc bypassing the flip buffers.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum);
+ tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
+
+ /* Allow use of channel flip buffer again */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum);
+
+ tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
+ }
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__);
+ tty_schedule_flip(tp);
+ }
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+}
+
+void jsm_carrier(struct jsm_channel *ch)
+{
+ struct jsm_board *bd;
+
+ int virt_carrier = 0;
+ int phys_carrier = 0;
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n");
+ if (!ch)
+ return;
+
+ bd = ch->ch_bd;
+
+ if (!bd)
+ return;
+
+ if (ch->ch_mistat & UART_MSR_DCD) {
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
+ phys_carrier = 1;
+ }
+
+ if (ch->ch_c_cflag & CLOCAL)
+ virt_carrier = 1;
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier);
+
+ /*
+ * Test for a VIRTUAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "carrier: virt DCD rose\n");
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "carrier: physical DCD rose\n");
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL transition to low, so long as we aren't
+ * currently ignoring physical transitions (which is what "virtual
+ * carrier" indicates).
+ *
+ * The transition of the virtual carrier to low really doesn't
+ * matter... it really only means "ignore carrier state", not
+ * "make pretend that carrier is there".
+ */
+ if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0)
+ && (phys_carrier == 0)) {
+ /*
+ * When carrier drops:
+ *
+ * Drop carrier on all open units.
+ *
+ * Flush queues, waking up any task waiting in the
+ * line discipline.
+ *
+ * Send a hangup to the control terminal.
+ *
+ * Enable all select calls.
+ */
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Make sure that our cached values reflect the current reality.
+ */
+ if (virt_carrier == 1)
+ ch->ch_flags |= CH_FCAR;
+ else
+ ch->ch_flags &= ~CH_FCAR;
+
+ if (phys_carrier == 1)
+ ch->ch_flags |= CH_CD;
+ else
+ ch->ch_flags &= ~CH_CD;
+}
+
+
+void jsm_check_queue_flow_control(struct jsm_channel *ch)
+{
+ int qleft = 0;
+
+ /* Store how much space we have left in the queue */
+ if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0)
+ qleft += RQUEUEMASK + 1;
+
+ /*
+ * Check to see if we should enforce flow control on our queue because
+ * the ld (or user) isn't reading data out of our queue fast enuf.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt.
+ * This will cause the UART's FIFO to back up, and force
+ * the RTS signal to be dropped.
+ * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to
+ * the other side, in hopes it will stop sending data to us.
+ * 3) NONE - Nothing we can do. We will simply drop any extra data
+ * that gets sent into us when the queue fills up.
+ */
+ if (qleft < 256) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
+ ch->ch_bd->bd_ops->disable_receiver(ch);
+ ch->ch_flags |= (CH_RECEIVER_OFF);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+ qleft);
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF) {
+ if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
+ ch->ch_bd->bd_ops->send_stop_character(ch);
+ ch->ch_stops_sent++;
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
+ }
+ }
+ }
+
+ /*
+ * Check to see if we should unenforce flow control because
+ * ld (or user) finally read enuf data out of our queue.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt.
+ * This will cause the UART's FIFO to raise RTS back up,
+ * which will allow the other side to start sending data again.
+ * 2) SWFLOW (IXOFF) - Send a start character to
+ * the other side, so it will start sending data to us again.
+ * 3) NONE - Do nothing. Since we didn't do anything to turn off the
+ * other side, we don't need to do anything now.
+ */
+ if (qleft > (RQUEUESIZE / 2)) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if (ch->ch_flags & CH_RECEIVER_OFF) {
+ ch->ch_bd->bd_ops->enable_receiver(ch);
+ ch->ch_flags &= ~(CH_RECEIVER_OFF);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+ qleft);
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
+ ch->ch_stops_sent = 0;
+ ch->ch_bd->bd_ops->send_start_character(ch);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
+ }
+ }
+}
+
+/*
+ * jsm_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+int jsm_tty_write(struct uart_port *port)
+{
+ int bufcount = 0, n = 0;
+ int data_count = 0,data_count1 =0;
+ u16 head;
+ u16 tail;
+ u16 tmask;
+ u32 remain;
+ int temp_tail = port->info->xmit.tail;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ tmask = WQUEUEMASK;
+ head = (channel->ch_w_head) & tmask;
+ tail = (channel->ch_w_tail) & tmask;
+
+ if ((bufcount = tail - head - 1) < 0)
+ bufcount += WQUEUESIZE;
+
+ n = bufcount;
+
+ n = min(n, 56);
+ remain = WQUEUESIZE - head;
+
+ data_count = 0;
+ if (n >= remain) {
+ n -= remain;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count < remain)) {
+ channel->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count++;
+ }
+ if (data_count == remain) head = 0;
+ }
+
+ data_count1 = 0;
+ if (n > 0) {
+ remain = n;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count1 < remain)) {
+ channel->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count1++;
+
+ }
+ }
+
+ port->info->xmit.tail = temp_tail;
+
+ data_count += data_count1;
+ if (data_count) {
+ head &= tmask;
+ channel->ch_w_head = head;
+ }
+
+ if (data_count) {
+ channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
+ }
+
+ return data_count;
+}
+
+static ssize_t jsm_driver_version_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", JSM_VERSION);
+}
+static DRIVER_ATTR(version, S_IRUSR, jsm_driver_version_show, NULL);
+
+static ssize_t jsm_driver_state_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", jsm_driver_state_text[jsm_driver_state]);
+}
+static DRIVER_ATTR(state, S_IRUSR, jsm_driver_state_show, NULL);
+
+void jsm_create_driver_sysfiles(struct device_driver *driverfs)
+{
+ driver_create_file(driverfs, &driver_attr_version);
+ driver_create_file(driverfs, &driver_attr_state);
+}
+
+void jsm_remove_driver_sysfiles(struct device_driver *driverfs)
+{
+ driver_remove_file(driverfs, &driver_attr_version);
+ driver_remove_file(driverfs, &driver_attr_state);
+}