summaryrefslogtreecommitdiff
path: root/drivers/serial/sh-sci.c
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2006-02-01 03:06:06 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-02-01 08:53:20 -0800
commitb7a76e4b4e212ec0829f3a7243064511d62cb6da (patch)
tree37a4be476a1a85a119131f88bc637e2628b1a75d /drivers/serial/sh-sci.c
parent37cc7943788c841b03a48c00751dfac0ad9f5b12 (diff)
[PATCH] sh: sh-sci clock framework updates
A couple of updates for the sh-sci serial driver: - Update for clock framework on sh. - Fix a compile error introduced by some h8300 changes. - Add SH7770/SH7780 subtype support. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r--drivers/serial/sh-sci.c225
1 files changed, 157 insertions, 68 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 0111206327ca..80737c131ce7 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/bitops.h>
+#include <linux/generic_serial.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
@@ -53,7 +54,9 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <linux/generic_serial.h>
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <asm/clock.h>
+#endif
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
@@ -86,9 +89,11 @@ static void sci_stop_rx(struct uart_port *port);
static int sci_request_irq(struct sci_port *port);
static void sci_free_irq(struct sci_port *port);
-static struct sci_port sci_ports[SCI_NPORTS];
+static struct sci_port sci_ports[];
static struct uart_driver sci_uart_driver;
+#define SCI_NPORTS sci_uart_driver.nr
+
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
static void handle_error(struct uart_port *port)
@@ -168,7 +173,7 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
int usegdb=0;
#ifdef CONFIG_SH_STANDARD_BIOS
- /* This call only does a trap the first time it is
+ /* This call only does a trap the first time it is
* called, and so is safe to do here unconditionally
*/
usegdb |= sh_bios_in_gdb_mode();
@@ -324,47 +329,46 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
-#else
-static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
-{
-}
#endif
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+/* SH7300 doesn't use RTS/CTS */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ sci_out(port, SCFCR, 0);
+}
+#elif defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
- {
- unsigned short data;
+ unsigned short data;
+
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+ ctrl_outw(data & 0x0fcf, SCPCR);
- /* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
- /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- ctrl_outw(data&0x0fcf, SCPCR);
- }
if (cflag & CRTSCTS)
fcr_val |= SCFCR_MCE;
else {
- unsigned short data;
-
/* We need to set SCPCR to enable RTS/CTS */
data = ctrl_inw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
- ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+ ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
- ctrl_outb(data&0xbf, SCPDR);
+ ctrl_outb(data & 0xbf, SCPDR);
}
-#endif
+
sci_out(port, SCFCR, fcr_val);
}
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
@@ -374,7 +378,7 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
sci_out(port, SCFCR, fcr_val);
}
-
+#endif
#else
/* For SH7750 */
@@ -385,7 +389,11 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+ ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+#endif
}
sci_out(port, SCFCR, fcr_val);
}
@@ -422,7 +430,11 @@ static void sci_transmit_chars(struct uart_port *port)
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+ txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+#else
txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+#endif
} else {
txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
}
@@ -491,7 +503,11 @@ static inline void sci_receive_chars(struct uart_port *port,
while (1) {
#if !defined(SCI_ONLY)
if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+ count = sci_in(port, SCRFDR) & 0x7f;
+#else
count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+#endif
} else {
count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
}
@@ -652,7 +668,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
struct tty_struct *tty = port->info->tty;
struct sci_port *s = &sci_ports[port->line];
- if (!s->break_flag && status & SCxSR_BRK(port))
+ if (!s->break_flag && status & SCxSR_BRK(port)) {
#if defined(CONFIG_CPU_SH3)
/* Debounce break */
s->break_flag = 1;
@@ -783,6 +799,7 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void *
(phase == CPUFREQ_RESUMECHANGE)){
for (i = 0; i < SCI_NPORTS; i++) {
struct uart_port *port = &sci_ports[i].port;
+ struct clk *clk;
/*
* Update the uartclk per-port if frequency has
@@ -795,7 +812,9 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void *
*
* Clean this up later..
*/
- port->uartclk = current_cpu_data.module_clock * 16;
+ clk = clk_get("module_clk");
+ port->uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
}
printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
@@ -1008,15 +1027,20 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
sci_out(port, SCSMR, smr_val);
switch (baud) {
- case 0: t = -1; break;
- case 2400: t = BPS_2400; break;
- case 4800: t = BPS_4800; break;
- case 9600: t = BPS_9600; break;
- case 19200: t = BPS_19200; break;
- case 38400: t = BPS_38400; break;
- case 57600: t = BPS_57600; break;
- case 115200: t = BPS_115200; break;
- default: t = SCBRR_VALUE(baud); break;
+ case 0:
+ t = -1;
+ break;
+ default:
+ {
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+ struct clk *clk = clk_get("module_clk");
+ t = SCBRR_VALUE(baud, clk_get_rate(clk));
+ clk_put(clk);
+#else
+ t = SCBRR_VALUE(baud);
+#endif
+ }
+ break;
}
if (t > 0) {
@@ -1030,7 +1054,9 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
- s->init_pins(port, termios->c_cflag);
+ if (likely(s->init_pins))
+ s->init_pins(port, termios->c_cflag);
+
sci_out(port, SCSCR, SCSCR_INIT(port));
if ((termios->c_cflag & CREAD) != 0)
@@ -1107,7 +1133,7 @@ static struct uart_ops sci_uart_ops = {
.verify_port = sci_verify_port,
};
-static struct sci_port sci_ports[SCI_NPORTS] = {
+static struct sci_port sci_ports[] = {
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
{
.port = {
@@ -1121,7 +1147,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
{
@@ -1165,7 +1190,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
{
.port = {
@@ -1225,7 +1249,7 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
.irqs = SH73180_SCIF_IRQS,
.init_pins = sci_init_pins_scif,
},
-#elif defined(CONFIG_SH_RTS7751R2D)
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
{
.port = {
.membase = (void *)0xffe80000,
@@ -1253,7 +1277,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
},
.type = PORT_SCI,
.irqs = SCI_IRQS,
- .init_pins = sci_init_pins_sci,
},
{
.port = {
@@ -1312,21 +1335,6 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
.irqs = SH7760_SCIF2_IRQS,
.init_pins = sci_init_pins_scif,
},
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
- {
- .port = {
- .membase = (void *)0xffe80000,
- .mapbase = 0xffe80000,
- .iotype = UPIO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH4_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
{
.port = {
@@ -1455,6 +1463,78 @@ static struct sci_port sci_ports[SCI_NPORTS] = {
.irqs = H8S_SCI_IRQS2,
.init_pins = sci_init_pins_sci,
},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+ {
+ .port = {
+ .membase = (void *)0xff923000,
+ .mapbase = 0xff923000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 61,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xff924000,
+ .mapbase = 0xff924000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 62,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xff925000,
+ .mapbase = 0xff925000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 63,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7770_SCIF2_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7780_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe10000,
+ .mapbase = 0xffe10000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 79,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7780_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
#else
#error "CPU subtype not defined"
#endif
@@ -1480,9 +1560,6 @@ static int __init serial_console_setup(struct console *co, char *options)
int flow = 'n';
int ret;
- if (co->index >= SCI_NPORTS)
- co->index = 0;
-
serial_console_port = &sci_ports[co->index];
port = &serial_console_port->port;
port->type = serial_console_port->type;
@@ -1496,14 +1573,21 @@ static int __init serial_console_setup(struct console *co, char *options)
* We need to set the initial uartclk here, since otherwise it will
* only ever be setup at sci_init() time.
*/
-#if !defined(__H8300H__) && !defined(__H8300S__)
- port->uartclk = current_cpu_data.module_clock * 16;
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
port->uartclk = CONFIG_CPU_CLOCK;
-#endif
+
#if defined(__H8300S__)
h8300_sci_enable(port, sci_enable);
#endif
+#elif defined(CONFIG_SUPERH64)
+ port->uartclk = current_cpu_info.module_clock * 16;
+#else
+ {
+ struct clk *clk = clk_get("module_clk");
+ port->uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
+ }
+#endif
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1566,7 +1650,7 @@ int __init kgdb_console_setup(struct console *co, char *options)
int parity = 'n';
int flow = 'n';
- if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+ if (co->index != kgdb_portnum)
co->index = kgdb_portnum;
if (options)
@@ -1606,7 +1690,7 @@ console_initcall(kgdb_console_init);
#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#define SCI_CONSOLE &serial_console
#else
-#define SCI_CONSOLE 0
+#define SCI_CONSOLE 0
#endif
static char banner[] __initdata =
@@ -1621,7 +1705,6 @@ static struct uart_driver sci_uart_driver = {
.dev_name = "ttySC",
.major = SCI_MAJOR,
.minor = SCI_MINOR_START,
- .nr = SCI_NPORTS,
.cons = SCI_CONSOLE,
};
@@ -1631,15 +1714,21 @@ static int __init sci_init(void)
printk("%s", banner);
+ sci_uart_driver.nr = ARRAY_SIZE(sci_ports);
+
ret = uart_register_driver(&sci_uart_driver);
if (ret == 0) {
for (chan = 0; chan < SCI_NPORTS; chan++) {
struct sci_port *sciport = &sci_ports[chan];
-#if !defined(__H8300H__) && !defined(__H8300S__)
- sciport->port.uartclk = (current_cpu_data.module_clock * 16);
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#elif defined(CONFIG_SUPERH64)
+ sciport->port.uartclk = current_cpu_info.module_clock * 16;
+#else
+ struct clk *clk = clk_get("module_clk");
+ sciport->port.uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
#endif
uart_add_one_port(&sci_uart_driver, &sciport->port);
sciport->break_timer.data = (unsigned long)sciport;