Merge branch 'master' into next

30 files changed, 44 insertions, 40 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index ae0251ef6f4e..78ed24bb6a35 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -35,6 +35,7 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c3db16b7afa1..2b1ea3d4c4f4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -38,6 +38,7 @@
 #include <linux/serial_8250.h>
 #include <linux/nmi.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 33149d982e82..d8c0ffbfa6e3 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/serial_core.h>
 #include <linux/signal.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index 0e1410f2c033..c13438c93012 100644
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include "8250.h"
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 24485cc62ff8..4822cb50cd0f 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"FUJ02E6",		0	},
 	/* Fujitsu Wacom 2FGT Tablet PC device */
 	{	"FUJ02E7",		0	},
+	/* Fujitsu Wacom 1FGT Tablet PC device */
+	{	"FUJ02E9",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e4b3c2c88bb6..b09a638d051f 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ce6c35333ff7..743ebf5f16da 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index fcf273e3f48c..96f7e7484fee 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/gfp.h>
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/console.h>
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 7c72888fbf94..c88f8ad3ff82 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 1b94c56ec239..3fc1d66e32c6 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -29,6 +29,7 @@
 
 #include <linux/module.h>
 #include <linux/tty.h>
+#include <linux/gfp.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 722eac18f382..814ac006393f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e579d7a1807a..4315b23590bd 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -46,6 +46,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/rational.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 23ba6b40b3ac..f164ba4eba02 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -20,6 +20,7 @@
 #include <linux/pci.h>
 #include <linux/serial_core.h>
 #include <linux/ioc3.h>
+#include <linux/slab.h>
 
 /*
  * Interesting things about the ioc3
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 836d9ab4f729..8ad28fc64926 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/ioc4.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 
 /*
  * interesting things about the ioc4
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 12cb5e446a4f..eaf545014119 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -26,6 +26,7 @@
  ***********************************************************************/
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 5673ca9dfdc8..7a4a914ecff0 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -30,6 +30,7 @@
 #include <linux/serial_reg.h>
 #include <linux/delay.h>	/* For udelay */
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 3c30c56aa2e1..3351c3bd59e4 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -41,6 +41,7 @@
 #define MAX_MAX3100 4
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 7bb5fee639e3..b5aaef965f24 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, termios->c_cflag, baud);
 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
@@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
 static void mcf_config_port(struct uart_port *port, int flags)
 {
 	port->type = PORT_MCF;
+	port->fifosize = MCFUART_TXFIFOSIZE;
 
 	/* Clear mask, so no surprise interrupts. */
 	writeb(0, port->membase + MCFUART_UIMR);
@@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
 /*
  *	Define the basic serial functions we support.
  */
-static struct uart_ops mcf_uart_ops = {
+static const struct uart_ops mcf_uart_ops = {
 	.tx_empty	= mcf_tx_empty,
 	.get_mctrl	= mcf_get_mctrl,
 	.set_mctrl	= mcf_set_mctrl,
@@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = {
 	.verify_port	= mcf_verify_port,
 };
 
-static struct mcf_uart mcf_ports[3];
+static struct mcf_uart mcf_ports[4];
 
 #define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fddaedb5..a176ab4bd65b 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -29,39 +29,6 @@
  * kind, whether express or implied.
  */
 
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode.  The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found.  However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
 #undef DEBUG
 
 #include <linux/device.h>
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index b5496c28e60b..55e113a0be03 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -70,6 +70,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 7571aaa138b0..9711e06a8374 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/delay.h> /* for udelay */
 #include <linux/device.h>
 #include <asm/io.h>
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index cdf172eda2e3..4abfebdb0fcc 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/of_platform.h>
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index f020de1cdd50..700e10833bf9 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -54,7 +54,6 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/bitops.h>
@@ -753,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
 		uap->curregs[R5] = new_reg;
 
 		/* NOTE: Not subject to 'transmitter active' rule. */
-		if (ZS_IS_ASLEEP(uap))
+		if (ZS_IS_ASLEEP(uap)) {
+			spin_unlock_irqrestore(&port->lock, flags);
 			return;
+		}
 		write_zsreg(uap, R5, uap->curregs[R5]);
 	}
 
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 56ee082157aa..1102a39b44f5 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -44,6 +44,7 @@
 #include <linux/serial_core.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 175d202ab37e..8cfa5b12ea7a 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -105,6 +105,10 @@ struct serial_cfg_mem {
  * manfid 0x0160, 0x0104
  * This card appears to have a 14.7456MHz clock.
  */
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
 {
 	port->uartclk = 14745600;
@@ -196,6 +200,11 @@ static const struct serial_quirk quirks[] = {
 		.multi	= -1,
 		.setup	= quirk_setup_brainboxes_0104,
 	}, {
+		.manfid	= 0x015D,
+		.prodid	= 0x4C45,
+		.multi	= -1,
+		.setup	= quirk_setup_brainboxes_0104,
+	}, {
 		.manfid	= MANFID_IBM,
 		.prodid	= ~0,
 		.multi	= -1,
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 2e71bbc04dac..b1962025b1aa 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -650,6 +650,7 @@ static struct console ks8695_console = {
 
 static int __init ks8695_console_init(void)
 {
+	add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
 	register_console(&ks8695_console);
 	return 0;
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 309de6be8204..8eb094c1f61b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -50,6 +50,7 @@
 #include <linux/list.h>
 #include <linux/dmaengine.h>
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 170d3d68c8f0..01f7731e59b8 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -29,6 +29,7 @@
 #include <linux/serial.h>
 #include <linux/sysrq.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #ifdef CONFIG_SERIO
 #include <linux/serio.h>
 #endif
@@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
 		if (err) {
+			of_iounmap(&op->resource[0],
+				   up->port.membase, up->reg_size);
 			kfree(up);
-			goto out_unmap;
+			return err;
 		}
 		dev_set_drvdata(&op->dev, up);
 
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 7bf10264a6ac..786ba85c170b 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #include "timbuart.h"
 
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 465f2fae1025..074904912f64 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -20,6 +20,7 @@
 
 #include <linux/module.h>
 #include <linux/serial.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>