Merge branch 'linux-2.6' into for-linus

5 files changed, 19 insertions, 19 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b0d502622d94..0b71e7d18903 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -767,37 +767,37 @@ config SERIAL_CPM_SCC1
 	bool "Support for SCC1 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SCC1 as a serial port
+	  Select this option to use SCC1 as a serial port
 
 config SERIAL_CPM_SCC2
 	bool "Support for SCC2 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SCC2 as a serial port
+	  Select this option to use SCC2 as a serial port
 
 config SERIAL_CPM_SCC3
 	bool "Support for SCC3 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SCC3 as a serial port
+	  Select this option to use SCC3 as a serial port
 
 config SERIAL_CPM_SCC4
 	bool "Support for SCC4 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SCC4 as a serial port
+	  Select this option to use SCC4 as a serial port
 
 config SERIAL_CPM_SMC1
 	bool "Support for SMC1 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SMC1 as a serial port
+	  Select this option to use SMC1 as a serial port
 
 config SERIAL_CPM_SMC2
 	bool "Support for SMC2 serial port"
 	depends on SERIAL_CPM=y
 	help
-	  Select the is option to use SMC2 as a serial port
+	  Select this option to use SMC2 as a serial port
 
 config SERIAL_SGI_L1_CONSOLE
 	bool "SGI Altix L1 serial console support"
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c78194..69715e556506 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 /* these are located in their respective files */
 void cpm_line_cr_cmd(int line, int cmd);
-int cpm_uart_init_portdesc(void);
+int __init cpm_uart_init_portdesc(void);
 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 0abb544ae63d..7a3b97fdf8d1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -195,10 +195,8 @@ static void cpm_uart_start_tx(struct uart_port *port)
 	if (cpm_uart_tx_pump(port) != 0) {
 		if (IS_SMC(pinfo)) {
 			smcp->smc_smcm |= SMCM_TX;
-			smcp->smc_smcmr |= SMCMR_TEN;
 		} else {
 			sccp->scc_sccm |= UART_SCCM_TX;
-			pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
 		}
 	}
 }
@@ -421,9 +419,10 @@ static int cpm_uart_startup(struct uart_port *port)
 	/* Startup rx-int */
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm |= SMCM_RX;
-		pinfo->smcp->smc_smcmr |= SMCMR_REN;
+		pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
 	} else {
 		pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+		pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	if (!(pinfo->flags & FLAG_CONSOLE))
@@ -1350,11 +1349,10 @@ static int cpm_uart_init(void) {
 		pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
 		pr_info(
 		"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
-		ret = cpm_uart_init_portdesc();
-		if (ret)
-			return ret;
-#endif
+
+		/* Don't run this again, if the console driver did it already */
+		if (cpm_uart_nr == 0)
+			cpm_uart_init_portdesc();
 
 		cpm_reg.nr = cpm_uart_nr;
 		ret = uart_register_driver(&cpm_reg);
@@ -1366,6 +1364,8 @@ static int cpm_uart_init(void) {
 			int con = cpm_uart_port_map[i];
 			cpm_uart_ports[con].port.line = i;
 			cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+			if (cpm_uart_ports[con].set_lineif)
+				cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
 			uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
 		}
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 95afc37297a8..08e55fdc882a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -184,7 +184,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 }
 
 /* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
 {
 	pr_debug("CPM uart[-]:init portdesc\n");
 
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 98ce88d80207..711bd1511439 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -921,7 +921,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
 {
 	struct ioc4_port *port = (struct ioc4_port *)arg;
 	struct hooks *hooks = port->ip_hooks;
-	unsigned int flags;
+	unsigned long flags;
 
 	spin_lock_irqsave(&port->ip_lock, flags);
 
@@ -1834,7 +1834,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
 	struct ioc4_port *port = (struct ioc4_port *)arg;
 	struct hooks *hooks = port->ip_hooks;
 	unsigned int rx_high_rd_aborted = 0;
-	unsigned int flags;
+	unsigned long flags;
 	struct uart_port *the_port;
 	int loop_counter;
 
@@ -2935,7 +2935,7 @@ static void __devexit ioc4_serial_exit(void)
 	uart_unregister_driver(&ioc4_uart_rs422);
 }
 
-module_init(ioc4_serial_init);
+late_initcall(ioc4_serial_init); /* Call only after tty init is done */
 module_exit(ioc4_serial_exit);
 
 MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");