summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-tegra20-slink.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-23 18:36:55 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-23 18:36:55 -0800
commitf2c73464d7b399cf4e0c601c1c7d7b079080fa52 (patch)
tree902decd0c280757075bce5068fee679e0ccc261e /drivers/spi/spi-tegra20-slink.c
parent93abdb7785503c269e73e811f3c7fd23a9243b14 (diff)
parent273c2279ca502267fac40bcaecb35942380c429c (diff)
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
Diffstat (limited to 'drivers/spi/spi-tegra20-slink.c')
-rw-r--r--drivers/spi/spi-tegra20-slink.c66
1 files changed, 30 insertions, 36 deletions
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index e66715ba37ed..a728bb82090f 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -33,8 +33,8 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/spi/spi.h>
-#include <linux/clk/tegra.h>
#define SLINK_COMMAND 0x000
#define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0)
@@ -167,10 +167,10 @@ struct tegra_slink_data {
spinlock_t lock;
struct clk *clk;
+ struct reset_control *rst;
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
u32 spi_max_frequency;
u32 cur_speed;
@@ -629,15 +629,15 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
- dev_err(tspi->dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ dma_chan = dma_request_slave_channel_reason(tspi->dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(tspi->dev,
+ "Dma channel is not available: %d\n", ret);
+ return ret;
}
dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
@@ -648,7 +648,6 @@ static int tegra_slink_init_dma_param(struct tegra_slink_data *tspi,
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -884,9 +883,9 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_slink_data *tspi)
dev_err(tspi->dev,
"CpuXfer 0x%08x:0x%08x:0x%08x\n", tspi->command_reg,
tspi->command2_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_deassert(tspi->rst);
complete(&tspi->xfer_completion);
goto exit;
}
@@ -957,9 +956,9 @@ static irqreturn_t handle_dma_based_xfer(struct tegra_slink_data *tspi)
dev_err(tspi->dev,
"DmaXfer 0x%08x:0x%08x:0x%08x\n", tspi->command_reg,
tspi->command2_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_assert(tspi->rst);
complete(&tspi->xfer_completion);
spin_unlock_irqrestore(&tspi->lock, flags);
return IRQ_HANDLED;
@@ -1020,11 +1019,6 @@ static irqreturn_t tegra_slink_isr(int irq, void *context_data)
static void tegra_slink_parse_dt(struct tegra_slink_data *tspi)
{
struct device_node *np = tspi->dev->of_node;
- u32 of_dma[2];
-
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1118,25 +1112,25 @@ static int tegra_slink_probe(struct platform_device *pdev)
goto exit_free_irq;
}
+ tspi->rst = devm_reset_control_get(&pdev->dev, "spi");
+ if (IS_ERR(tspi->rst)) {
+ dev_err(&pdev->dev, "can not get reset\n");
+ ret = PTR_ERR(tspi->rst);
+ goto exit_free_irq;
+ }
+
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
- ret = tegra_slink_init_dma_param(tspi, true);
- if (ret < 0) {
- dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
- goto exit_free_irq;
- }
-
- ret = tegra_slink_init_dma_param(tspi, false);
- if (ret < 0) {
- dev_err(&pdev->dev, "TxDma Init failed, err %d\n", ret);
- goto exit_rx_dma_free;
- }
- tspi->max_buf_size = tspi->dma_buf_size;
- init_completion(&tspi->tx_dma_complete);
- init_completion(&tspi->rx_dma_complete);
- }
+ ret = tegra_slink_init_dma_param(tspi, true);
+ if (ret < 0)
+ goto exit_free_irq;
+ ret = tegra_slink_init_dma_param(tspi, false);
+ if (ret < 0)
+ goto exit_rx_dma_free;
+ tspi->max_buf_size = tspi->dma_buf_size;
+ init_completion(&tspi->tx_dma_complete);
+ init_completion(&tspi->rx_dma_complete);
init_completion(&tspi->xfer_completion);