summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorMark Brown <broonie@linaro.org>2013-09-01 13:48:44 +0100
committerMark Brown <broonie@linaro.org>2013-09-01 13:48:44 +0100
commitb29bc3df37afa440290f4b8e50cf5dce429ce22f (patch)
tree2ba216f8d2e3157c535a3535d821133f977e7067 /drivers/spi
parentc3dbe2b76a835fb4b2633645b0c49359b49eb128 (diff)
parent2e29db400c4898ff72e2ea87d262921df00f1c87 (diff)
Merge remote-tracking branch 'spi/topic/bitbang' into spi-next
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-altera.c12
-rw-r--r--drivers/spi/spi-bitbang.c260
-rw-r--r--drivers/spi/spi-nuc900.c13
-rw-r--r--drivers/spi/spi-xilinx.c16
4 files changed, 113 insertions, 188 deletions
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 523f2f649e26..156eb888655e 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
}
}
-static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
-{
- return 0;
-}
-
-static int altera_spi_setup(struct spi_device *spi)
-{
- return 0;
-}
-
static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
{
if (hw->tx) {
@@ -224,7 +214,6 @@ static int altera_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = 16;
master->mode_bits = SPI_CS_HIGH;
- master->setup = altera_spi_setup;
hw = spi_master_get_devdata(master);
platform_set_drvdata(pdev, hw);
@@ -233,7 +222,6 @@ static int altera_spi_probe(struct platform_device *pdev)
hw->bitbang.master = spi_master_get(master);
if (!hw->bitbang.master)
return err;
- hw->bitbang.setup_transfer = altera_spi_setupxfer;
hw->bitbang.chipselect = altera_spi_chipsel;
hw->bitbang.txrx_bufs = altera_spi_txrx;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index a63d7da3bfe2..e3946e44e076 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -255,150 +255,140 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
* Drivers can provide word-at-a-time i/o primitives, or provide
* transfer-at-a-time ones to leverage dma or fifo hardware.
*/
-static void bitbang_work(struct work_struct *work)
+
+static int spi_bitbang_prepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang =
- container_of(work, struct spi_bitbang, work);
+ struct spi_bitbang *bitbang;
unsigned long flags;
- struct spi_message *m, *_m;
+
+ bitbang = spi_master_get_devdata(spi);
spin_lock_irqsave(&bitbang->lock, flags);
bitbang->busy = 1;
- list_for_each_entry_safe(m, _m, &bitbang->queue, queue) {
- struct spi_device *spi;
- unsigned nsecs;
- struct spi_transfer *t = NULL;
- unsigned tmp;
- unsigned cs_change;
- int status;
- int do_setup = -1;
-
- list_del(&m->queue);
- spin_unlock_irqrestore(&bitbang->lock, flags);
-
- /* FIXME this is made-up ... the correct value is known to
- * word-at-a-time bitbang code, and presumably chipselect()
- * should enforce these requirements too?
- */
- nsecs = 100;
+ spin_unlock_irqrestore(&bitbang->lock, flags);
- spi = m->spi;
- tmp = 0;
- cs_change = 1;
- status = 0;
+ return 0;
+}
- list_for_each_entry (t, &m->transfers, transfer_list) {
-
- /* override speed or wordsize? */
- if (t->speed_hz || t->bits_per_word)
- do_setup = 1;
-
- /* init (-1) or override (1) transfer params */
- if (do_setup != 0) {
- status = bitbang->setup_transfer(spi, t);
- if (status < 0)
- break;
- if (do_setup == -1)
- do_setup = 0;
- }
-
- /* set up default clock polarity, and activate chip;
- * this implicitly updates clock and spi modes as
- * previously recorded for this device via setup().
- * (and also deselects any other chip that might be
- * selected ...)
- */
- if (cs_change) {
- bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
- ndelay(nsecs);
- }
- cs_change = t->cs_change;
- if (!t->tx_buf && !t->rx_buf && t->len) {
- status = -EINVAL;
- break;
- }
+static int spi_bitbang_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct spi_bitbang *bitbang;
+ unsigned nsecs;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status;
+ int do_setup = -1;
+ struct spi_device *spi = m->spi;
+
+ bitbang = spi_master_get_devdata(master);
+
+ /* FIXME this is made-up ... the correct value is known to
+ * word-at-a-time bitbang code, and presumably chipselect()
+ * should enforce these requirements too?
+ */
+ nsecs = 100;
- /* transfer data. the lower level code handles any
- * new dma mappings it needs. our caller always gave
- * us dma-safe buffers.
- */
- if (t->len) {
- /* REVISIT dma API still needs a designated
- * DMA_ADDR_INVALID; ~0 might be better.
- */
- if (!m->is_dma_mapped)
- t->rx_dma = t->tx_dma = 0;
- status = bitbang->txrx_bufs(spi, t);
- }
- if (status > 0)
- m->actual_length += status;
- if (status != t->len) {
- /* always report some kind of error */
- if (status >= 0)
- status = -EREMOTEIO;
+ cs_change = 1;
+ status = 0;
+
+ list_for_each_entry (t, &m->transfers, transfer_list) {
+
+ /* override speed or wordsize? */
+ if (t->speed_hz || t->bits_per_word)
+ do_setup = 1;
+
+ /* init (-1) or override (1) transfer params */
+ if (do_setup != 0) {
+ status = bitbang->setup_transfer(spi, t);
+ if (status < 0)
break;
- }
- status = 0;
-
- /* protocol tweaks before next transfer */
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) {
- /* sometimes a short mid-message deselect of the chip
- * may be needed to terminate a mode or command
- */
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ if (do_setup == -1)
+ do_setup = 0;
}
- m->status = status;
- m->complete(m->context);
+ /* set up default clock polarity, and activate chip;
+ * this implicitly updates clock and spi modes as
+ * previously recorded for this device via setup().
+ * (and also deselects any other chip that might be
+ * selected ...)
+ */
+ if (cs_change) {
+ bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
+ ndelay(nsecs);
+ }
+ cs_change = t->cs_change;
+ if (!t->tx_buf && !t->rx_buf && t->len) {
+ status = -EINVAL;
+ break;
+ }
- /* normally deactivate chipselect ... unless no error and
- * cs_change has hinted that the next message will probably
- * be for this chip too.
+ /* transfer data. the lower level code handles any
+ * new dma mappings it needs. our caller always gave
+ * us dma-safe buffers.
*/
- if (!(status == 0 && cs_change)) {
+ if (t->len) {
+ /* REVISIT dma API still needs a designated
+ * DMA_ADDR_INVALID; ~0 might be better.
+ */
+ if (!m->is_dma_mapped)
+ t->rx_dma = t->tx_dma = 0;
+ status = bitbang->txrx_bufs(spi, t);
+ }
+ if (status > 0)
+ m->actual_length += status;
+ if (status != t->len) {
+ /* always report some kind of error */
+ if (status >= 0)
+ status = -EREMOTEIO;
+ break;
+ }
+ status = 0;
+
+ /* protocol tweaks before next transfer */
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) {
+ /* sometimes a short mid-message deselect of the chip
+ * may be needed to terminate a mode or command
+ */
ndelay(nsecs);
bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
ndelay(nsecs);
}
+ }
+
+ m->status = status;
- spin_lock_irqsave(&bitbang->lock, flags);
+ /* normally deactivate chipselect ... unless no error and
+ * cs_change has hinted that the next message will probably
+ * be for this chip too.
+ */
+ if (!(status == 0 && cs_change)) {
+ ndelay(nsecs);
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
}
- bitbang->busy = 0;
- spin_unlock_irqrestore(&bitbang->lock, flags);
+
+ spi_finalize_current_message(master);
+
+ return status;
}
-/**
- * spi_bitbang_transfer - default submit to transfer queue
- */
-int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
+static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang;
+ struct spi_bitbang *bitbang;
unsigned long flags;
- int status = 0;
- m->actual_length = 0;
- m->status = -EINPROGRESS;
-
- bitbang = spi_master_get_devdata(spi->master);
+ bitbang = spi_master_get_devdata(spi);
spin_lock_irqsave(&bitbang->lock, flags);
- if (!spi->max_speed_hz)
- status = -ENETDOWN;
- else {
- list_add_tail(&m->queue, &bitbang->queue);
- queue_work(bitbang->workqueue, &bitbang->work);
- }
+ bitbang->busy = 0;
spin_unlock_irqrestore(&bitbang->lock, flags);
- return status;
+ return 0;
}
-EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
/*----------------------------------------------------------------------*/
@@ -428,20 +418,22 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
int spi_bitbang_start(struct spi_bitbang *bitbang)
{
struct spi_master *master = bitbang->master;
- int status;
if (!master || !bitbang->chipselect)
return -EINVAL;
- INIT_WORK(&bitbang->work, bitbang_work);
spin_lock_init(&bitbang->lock);
- INIT_LIST_HEAD(&bitbang->queue);
if (!master->mode_bits)
master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
- if (!master->transfer)
- master->transfer = spi_bitbang_transfer;
+ if (master->transfer || master->transfer_one_message)
+ return -EINVAL;
+
+ master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
+ master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
+ master->transfer_one_message = spi_bitbang_transfer_one;
+
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
@@ -452,34 +444,12 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
master->setup = spi_bitbang_setup;
master->cleanup = spi_bitbang_cleanup;
}
- } else if (!master->setup)
- return -EINVAL;
- if (master->transfer == spi_bitbang_transfer &&
- !bitbang->setup_transfer)
- return -EINVAL;
-
- /* this task is the only thing to touch the SPI bits */
- bitbang->busy = 0;
- bitbang->workqueue = create_singlethread_workqueue(
- dev_name(master->dev.parent));
- if (bitbang->workqueue == NULL) {
- status = -EBUSY;
- goto err1;
}
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
*/
- status = spi_register_master(master);
- if (status < 0)
- goto err2;
-
- return status;
-
-err2:
- destroy_workqueue(bitbang->workqueue);
-err1:
- return status;
+ return spi_register_master(master);
}
EXPORT_SYMBOL_GPL(spi_bitbang_start);
@@ -490,10 +460,6 @@ int spi_bitbang_stop(struct spi_bitbang *bitbang)
{
spi_unregister_master(bitbang->master);
- WARN_ON(!list_empty(&bitbang->queue));
-
- destroy_workqueue(bitbang->workqueue);
-
return 0;
}
EXPORT_SYMBOL_GPL(spi_bitbang_stop);
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index 150d85453c27..2ad3d74ac021 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
spin_unlock_irqrestore(&hw->lock, flags);
}
-static int nuc900_spi_setupxfer(struct spi_device *spi,
- struct spi_transfer *t)
-{
- return 0;
-}
-
-static int nuc900_spi_setup(struct spi_device *spi)
-{
- return 0;
-}
-
static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
@@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev)
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
- hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
hw->bitbang.chipselect = nuc900_spi_chipsel;
hw->bitbang.txrx_bufs = nuc900_spi_txrx;
- hw->bitbang.master->setup = nuc900_spi_setup;
hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (hw->res == NULL) {
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 09a942852593..fb56fcfdf65e 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -233,21 +233,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
return 0;
}
-static int xilinx_spi_setup(struct spi_device *spi)
-{
- /* always return 0, we can not check the number of bits.
- * There are cases when SPI setup is called before any driver is
- * there, in that case the SPI core defaults to 8 bits, which we
- * do not support in some cases. But if we return an error, the
- * SPI device would not be registered and no driver can get hold of it
- * When the driver is there, it will call SPI setup again with the
- * correct number of bits per transfer.
- * If a driver setups with the wrong bit number, it will fail when
- * it tries to do a transfer
- */
- return 0;
-}
-
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
{
u8 sr;
@@ -375,7 +360,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
- xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
if (!request_mem_region(mem->start, resource_size(mem),