summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorIan Wisbon <ian.wisbon@timesys.com>2011-02-10 17:15:15 -0500
committerIan Wisbon <ian.wisbon@timesys.com>2011-02-10 17:19:54 -0500
commit0eb553bf96e2c990d3bfccaa07da0863624c89ab (patch)
tree79b396bf70ae3795e6ee9a3b645e64f7e29474e7 /drivers/spi
parenteffff5718c380983788fe6c380671c18e15ac7c2 (diff)
Linux 2.6.31 Release for Digi ConnectCore Wi-i.MX boards
Digi 01262011 Release
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig5
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/mxc_spi.c38
3 files changed, 34 insertions, 10 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e16915107c6b..736a12ff9045 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -261,6 +261,11 @@ config SPI_STMP3XXX
help
SPI driver for Freescale STMP37xx/378x SoC SSP interface
+config SPI_MXS
+ tristate "Freescale MXS SPI/SSP controller"
+ depends on ARCH_MXS && SPI_MASTER
+ help
+ SPI driver for Freescale MXS SoC SSP interface
#
# Add new SPI master controllers in alphabetical order above this line
#
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index b7cfb6245c0b..b6dbdf064181 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_MXC) += mxc_spi.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+obj-$(CONFIG_SPI_MXS) += spi_mxs.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index cfe40a4526a7..5f4aa2e90392 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -657,7 +657,7 @@ void mxc_spi_chipselect(struct spi_device *spi, int is_active)
if (spi->mode & SPI_CPHA)
ctrl_reg |=
spi_ver_def->mode_mask << spi_ver_def->pha_shift;
- if (!(spi->mode & SPI_CPOL))
+ if (spi->mode & SPI_CPOL)
ctrl_reg |=
spi_ver_def->mode_mask << spi_ver_def->
low_pol_shift;
@@ -824,16 +824,23 @@ int mxc_spi_poll_transfer(struct spi_device *spi, struct spi_transfer *t)
master_drv_data->transfer.count = t->len;
fifo_size = master_drv_data->spi_ver_def->fifo_size;
- count = (t->len > fifo_size) ? fifo_size : t->len;
- spi_put_tx_data(master_drv_data->base, count, master_drv_data);
+ while (master_drv_data->transfer.count) {
+ count = (master_drv_data->transfer.count > fifo_size) ?
+ fifo_size : master_drv_data->transfer.count;
- while ((((status = __raw_readl(master_drv_data->test_addr)) &
- master_drv_data->spi_ver_def->rx_cnt_mask) >> master_drv_data->
- spi_ver_def->rx_cnt_off) != count);
+ spi_put_tx_data(master_drv_data->base, count, master_drv_data);
- for (i = 0; i < count; i++) {
- rx_tmp = __raw_readl(master_drv_data->base + MXC_CSPIRXDATA);
- master_drv_data->transfer.rx_get(master_drv_data, rx_tmp);
+ while ((((status = __raw_readl(master_drv_data->test_addr)) &
+ master_drv_data->spi_ver_def->rx_cnt_mask) >> master_drv_data->
+ spi_ver_def->rx_cnt_off) != count)
+ ;
+
+ for (i = 0; i < count; i++) {
+ rx_tmp = __raw_readl(master_drv_data->base + MXC_CSPIRXDATA);
+ master_drv_data->transfer.rx_get(master_drv_data, rx_tmp);
+ }
+
+ master_drv_data->transfer.count -= count;
}
clk_disable(master_drv_data->clk);
@@ -864,8 +871,19 @@ int mxc_spi_transfer(struct spi_device *spi, struct spi_transfer *t)
int chipselect_status;
u32 fifo_size;
+#if defined(CONFIG_MODULE_CCXMX51)
+ /**
+ * The ConnectCore i.MX51/Wi-i.MX51 use this bus to communicate with
+ * the pmic, using poll transfers. Because that bus is also used to
+ * communicate the cpu with other devices, use also poll transfers
+ * to avoid conflicts.
+ */
+ if (spi->master->bus_num == 1) {
+ mxc_spi_poll_transfer(spi, t);
+ return t->len;
+ }
+#endif
/* Get the master controller driver data from spi device's master */
-
master_drv_data = spi_master_get_devdata(spi->master);
chipselect_status = __raw_readl(MXC_CSPICONFIG +