diff options
| author | Linus Walleij <linus.walleij@stericsson.com> | 2010-10-01 11:47:32 +0200 |
|---|---|---|
| committer | Grant Likely <grant.likely@secretlab.ca> | 2010-10-12 21:37:37 -0600 |
| commit | 5a1c98be1de165c8ad1bd5343a5d779230669489 (patch) | |
| tree | 336a44e0397c55d08daad24f8f3a196d527ac364 /drivers/spi | |
| parent | bde435a9ca376d0b7809768ca803dbf14416b9c1 (diff) | |
spi/pl022: get rid of chipinfo dev pointer
What is the dev pointer doing inside the platform data anyway.
We have another pointer to the actual device at hand, use that.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/amba-pl022.c | 27 |
1 files changed, 12 insertions, 15 deletions
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 59c90f3ccc26..19d54aa31a36 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1597,58 +1597,58 @@ static int verify_controller_parameters(struct pl022 *pl022, { if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "interface is configured incorrectly\n"); return -EINVAL; } if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && (!pl022->vendor->unidir)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "unidirectional mode not supported in this " "hardware version\n"); return -EINVAL; } if ((chip_info->hierarchy != SSP_MASTER) && (chip_info->hierarchy != SSP_SLAVE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "hierarchy is configured incorrectly\n"); return -EINVAL; } if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "cpsdvsr is configured incorrectly\n"); return -EINVAL; } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Communication mode is configured incorrectly\n"); return -EINVAL; } if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "CTRL LEN is configured incorrectly\n"); return -EINVAL; } if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Wait State is configured incorrectly\n"); return -EINVAL; } @@ -1658,13 +1658,13 @@ static int verify_controller_parameters(struct pl022 *pl022, SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire half duplex mode requested," " but this is only available in the" " ST version of PL022\n"); @@ -1672,7 +1672,7 @@ static int verify_controller_parameters(struct pl022 *pl022, } } if (chip_info->cs_control == NULL) { - dev_warn(chip_info->dev, + dev_warn(&pl022->adev->dev, "Chip Select Function is NULL for this chip\n"); chip_info->cs_control = null_cs_control; } @@ -1852,9 +1852,6 @@ static int pl022_setup(struct spi_device *spi) "using user supplied controller_data settings\n"); } - /* Pointer back to the SPI device */ - chip_info->dev = &spi->dev; - /* * We can override with custom divisors, else we use the board * frequency setting |