staging: Beeceem USB Wimax driver

The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.

Here is a staging ready version (i.e warts and all)

0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops

Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.

This is compile tested only, see TODO for what still needs
to be done.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 2239 insertions, 0 deletions

diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
new file mode 100644
index 000000000000..5ed58a863ebd
--- /dev/null
+++ b/drivers/staging/bcm/Misc.c
@@ -0,0 +1,2239 @@
+#include "headers.h"
+
+static VOID default_wimax_protocol_initialize(PMINI_ADAPTER Adapter)
+{
+
+	UINT    uiLoopIndex;
+
+    for(uiLoopIndex=0; uiLoopIndex < NO_OF_QUEUES-1; uiLoopIndex++)
+    {
+    	Adapter->PackInfo[uiLoopIndex].uiThreshold=TX_PACKET_THRESHOLD;
+        Adapter->PackInfo[uiLoopIndex].uiMaxAllowedRate=MAX_ALLOWED_RATE;
+        Adapter->PackInfo[uiLoopIndex].uiMaxBucketSize=20*1024*1024;
+    }
+
+    Adapter->BEBucketSize=BE_BUCKET_SIZE;
+    Adapter->rtPSBucketSize=rtPS_BUCKET_SIZE;
+    Adapter->LinkStatus=SYNC_UP_REQUEST;
+    Adapter->TransferMode=IP_PACKET_ONLY_MODE;
+    Adapter->usBestEffortQueueIndex=-1;
+    return;
+}
+
+
+INT
+InitAdapter(PMINI_ADAPTER psAdapter)
+{
+    int i = 0;
+	INT Status = STATUS_SUCCESS ;
+	BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT,  DBG_LVL_ALL,  "Initialising Adapter = 0x%x",(unsigned int) psAdapter);
+
+	if(psAdapter == NULL)
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT,  DBG_LVL_ALL, "Adapter is NULL");
+		return -EINVAL;
+	}
+
+	sema_init(&psAdapter->NVMRdmWrmLock,1);
+//	psAdapter->ulFlashCalStart = FLASH_AUTO_INIT_BASE_ADDR;
+
+	sema_init(&psAdapter->rdmwrmsync, 1);
+	spin_lock_init(&psAdapter->control_queue_lock);
+	spin_lock_init(&psAdapter->txtransmitlock);
+    sema_init(&psAdapter->RxAppControlQueuelock, 1);
+//    sema_init(&psAdapter->data_packet_queue_lock, 1);
+    sema_init(&psAdapter->fw_download_sema, 1);
+  	sema_init(&psAdapter->LowPowerModeSync,1);
+
+  // spin_lock_init(&psAdapter->sleeper_lock);
+
+    for(i=0;i<NO_OF_QUEUES; i++)
+        spin_lock_init(&psAdapter->PackInfo[i].SFQueueLock);
+    i=0;
+
+    init_waitqueue_head(&psAdapter->process_rx_cntrlpkt);
+    init_waitqueue_head(&psAdapter->tx_packet_wait_queue);
+    init_waitqueue_head(&psAdapter->process_read_wait_queue);
+    init_waitqueue_head(&psAdapter->ioctl_fw_dnld_wait_queue);
+    init_waitqueue_head(&psAdapter->lowpower_mode_wait_queue);
+	psAdapter->waiting_to_fw_download_done = TRUE;
+    //init_waitqueue_head(&psAdapter->device_wake_queue);
+    psAdapter->fw_download_done=FALSE;
+
+    psAdapter->pvOsDepData = (PLINUX_DEP_DATA) kmalloc(sizeof(LINUX_DEP_DATA),
+                 GFP_KERNEL);
+
+    if(psAdapter->pvOsDepData == NULL)
+	{
+        BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Linux Specific Data allocation failed");
+        return -ENOMEM;
+    }
+    memset(psAdapter->pvOsDepData, 0, sizeof(LINUX_DEP_DATA));
+
+	default_wimax_protocol_initialize(psAdapter);
+	for (i=0;i<MAX_CNTRL_PKTS;i++)
+	{
+		psAdapter->txctlpacket[i] = (char *)kmalloc(MAX_CNTL_PKT_SIZE,
+												GFP_KERNEL);
+		if(!psAdapter->txctlpacket[i])
+		{
+			BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No More Cntl pkts got, max got is %d", i);
+			return -ENOMEM;
+		}
+	}
+	if(AllocAdapterDsxBuffer(psAdapter))
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Failed to allocate DSX buffers");
+		return -EINVAL;
+	}
+
+	//Initialize PHS interface
+	if(phs_init(&psAdapter->stBCMPhsContext,psAdapter)!=0)
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"%s:%s:%d:Error PHS Init Failed=====>\n", __FILE__, __FUNCTION__, __LINE__);
+		return -ENOMEM;
+	}
+
+	Status = BcmAllocFlashCSStructure(psAdapter);
+	if(Status)
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"Memory Allocation for Flash structure failed");
+		return Status ;
+	}
+
+	Status = vendorextnInit(psAdapter);
+
+	if(STATUS_SUCCESS != Status)
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"Vendor Init Failed");
+		return Status ;
+	}
+
+	BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,  "Adapter initialised");
+
+
+	return STATUS_SUCCESS;
+}
+
+VOID AdapterFree(PMINI_ADAPTER Adapter)
+{
+	INT count = 0;
+
+	beceem_protocol_reset(Adapter);
+
+	vendorextnExit(Adapter);
+
+	if(Adapter->control_packet_handler && !IS_ERR(Adapter->control_packet_handler))
+	  	kthread_stop (Adapter->control_packet_handler);
+	if(Adapter->transmit_packet_thread && !IS_ERR(Adapter->transmit_packet_thread))
+    	kthread_stop (Adapter->transmit_packet_thread);
+    wake_up(&Adapter->process_read_wait_queue);
+	if(Adapter->LEDInfo.led_thread_running & (BCM_LED_THREAD_RUNNING_ACTIVELY | BCM_LED_THREAD_RUNNING_INACTIVELY))
+		kthread_stop (Adapter->LEDInfo.led_cntrl_threadid);
+	bcm_unregister_networkdev(Adapter);
+	while(atomic_read(&Adapter->ApplicationRunning))
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Waiting for Application to close.. %d\n",atomic_read(&Adapter->ApplicationRunning));
+		msleep(100);
+	}
+	unregister_control_device_interface(Adapter);
+	if(Adapter->dev && !IS_ERR(Adapter->dev))
+		free_netdev(Adapter->dev);
+	if(Adapter->pstargetparams != NULL)
+	{
+		bcm_kfree(Adapter->pstargetparams);
+	}
+	for (count =0;count < MAX_CNTRL_PKTS;count++)
+	{
+		if(Adapter->txctlpacket[count])
+			bcm_kfree(Adapter->txctlpacket[count]);
+	}
+	FreeAdapterDsxBuffer(Adapter);
+	if(Adapter->pvOsDepData)
+		bcm_kfree (Adapter->pvOsDepData);
+	if(Adapter->pvInterfaceAdapter)
+		bcm_kfree(Adapter->pvInterfaceAdapter);
+
+	//Free the PHS Interface
+	PhsCleanup(&Adapter->stBCMPhsContext);
+
+#ifndef BCM_SHM_INTERFACE
+	BcmDeAllocFlashCSStructure(Adapter);
+#endif
+
+	bcm_kfree (Adapter);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "<========\n");
+}
+
+
+int create_worker_threads(PMINI_ADAPTER psAdapter)
+{
+	BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Init Threads...");
+	// Rx Control Packets Processing
+	psAdapter->control_packet_handler = kthread_run((int (*)(void *))
+			control_packet_handler, psAdapter, "CtrlPktHdlr");
+	if(IS_ERR(psAdapter->control_packet_handler))
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No Kernel Thread, but still returning success\n");
+		return PTR_ERR(psAdapter->control_packet_handler);
+	}
+	// Tx Thread
+	psAdapter->transmit_packet_thread = kthread_run((int (*)(void *))
+		tx_pkt_handler, psAdapter, "TxPktThread");
+	if(IS_ERR (psAdapter->transmit_packet_thread))
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No Kernel Thread, but still returning success");
+		kthread_stop(psAdapter->control_packet_handler);
+		return PTR_ERR(psAdapter->transmit_packet_thread);
+	}
+	return 0;
+}
+
+
+static inline struct file *open_firmware_file(PMINI_ADAPTER Adapter, char *path)
+{
+    struct file             *flp=NULL;
+    mm_segment_t        oldfs;
+    oldfs=get_fs();
+	set_fs(get_ds());
+    flp=filp_open(path, O_RDONLY, S_IRWXU);
+    set_fs(oldfs);
+    if(IS_ERR(flp))
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Unable To Open File %s, err  %lx",
+				path, PTR_ERR(flp));
+		flp = NULL;
+    }
+    else
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Got file descriptor pointer of %s!",
+			path);
+    }
+	if(Adapter->device_removed)
+	{
+		flp = NULL;
+	}
+
+    return flp;
+}
+
+
+int BcmFileDownload(PMINI_ADAPTER Adapter,/**< Logical Adapter */
+                        char *path,     /**< path to image file */
+                        unsigned int loc    /**< Download Address on the chip*/
+                        )
+{
+    int             errorno=0;
+    struct file     *flp=NULL;
+    mm_segment_t    oldfs;
+    struct timeval tv={0};
+
+    flp=open_firmware_file(Adapter, path);
+    if(!flp)
+    {
+        errorno = -ENOENT;
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Unable to Open %s\n", path);
+        goto exit_download;
+    }
+    BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Opened file is = %s and length =0x%lx to be downloaded at =0x%x", path,(unsigned long)flp->f_dentry->d_inode->i_size, loc);
+    do_gettimeofday(&tv);
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "download start %lx", ((tv.tv_sec * 1000) +
+                            (tv.tv_usec/1000)));
+    if(Adapter->bcm_file_download(Adapter->pvInterfaceAdapter, flp, loc))
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Failed to download the firmware with error\
+		 %x!!!", -EIO);
+        errorno=-EIO;
+        goto exit_download;
+    }
+    oldfs=get_fs();set_fs(get_ds());
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+    vfs_llseek(flp, 0, 0);
+#endif
+    set_fs(oldfs);
+    if(Adapter->bcm_file_readback_from_chip(Adapter->pvInterfaceAdapter,
+										flp, loc))
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Failed to read back firmware!");
+        errorno=-EIO;
+        goto exit_download;
+    }
+
+exit_download:
+    oldfs=get_fs();set_fs(get_ds());
+	if(flp && !(IS_ERR(flp)))
+    	filp_close(flp, current->files);
+    set_fs(oldfs);
+    do_gettimeofday(&tv);
+    BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "file download done at %lx", ((tv.tv_sec * 1000) +
+                            (tv.tv_usec/1000)));
+    return errorno;
+}
+
+
+void bcm_kfree_skb(struct sk_buff *skb)
+{
+	if(skb)
+    {
+    	kfree_skb(skb);
+    }
+	skb = NULL ;
+}
+
+VOID bcm_kfree(VOID *ptr)
+{
+	if(ptr)
+	{
+		kfree(ptr);
+	}
+	ptr = NULL ;
+}
+
+/**
+@ingroup ctrl_pkt_functions
+This function copies the contents of given buffer
+to the control packet and queues it for transmission.
+@note Do not acquire the spinock, as it it already acquired.
+@return  SUCCESS/FAILURE.
+*/
+INT CopyBufferToControlPacket(PMINI_ADAPTER Adapter,/**<Logical Adapter*/
+									  PVOID ioBuffer/**<Control Packet Buffer*/
+									  )
+{
+	PLEADER				pLeader=NULL;
+	INT					Status=0;
+	unsigned char		*ctrl_buff=NULL;
+	UINT				pktlen=0;
+	PLINK_REQUEST		pLinkReq 	= NULL;
+	PUCHAR				pucAddIndication = NULL;
+
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "======>");
+	if(!ioBuffer)
+	{
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Got Null Buffer\n");
+		return -EINVAL;
+	}
+
+	pLinkReq = (PLINK_REQUEST)ioBuffer;
+	pLeader=(PLEADER)ioBuffer; //ioBuffer Contains sw_Status and Payload
+
+	if(Adapter->bShutStatus == TRUE &&
+		pLinkReq->szData[0] == LINK_DOWN_REQ_PAYLOAD &&
+		pLinkReq->szData[1] == LINK_SYNC_UP_SUBTYPE)
+	{
+		//Got sync down in SHUTDOWN..we could not process this.
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "SYNC DOWN Request in Shut Down Mode..\n");
+		return STATUS_FAILURE;
+	}
+
+	if((pLeader->Status == LINK_UP_CONTROL_REQ) &&
+		((pLinkReq->szData[0] == LINK_UP_REQ_PAYLOAD &&
+		 (pLinkReq->szData[1] == LINK_SYNC_UP_SUBTYPE)) ||//Sync Up Command
+		 pLinkReq->szData[0] == NETWORK_ENTRY_REQ_PAYLOAD)) //Net Entry Command
+	{
+		if(Adapter->LinkStatus > PHY_SYNC_ACHIVED)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL,"LinkStatus is Greater than PHY_SYN_ACHIEVED");
+			return STATUS_FAILURE;
+		}
+		if(TRUE == Adapter->bShutStatus)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "SYNC UP IN SHUTDOWN..Device WakeUp\n");
+			if(Adapter->bTriedToWakeUpFromlowPowerMode == FALSE)
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Waking up for the First Time..\n");
+				Adapter->usIdleModePattern = ABORT_SHUTDOWN_MODE; // change it to 1 for current support.
+				Adapter->bWakeUpDevice = TRUE;
+				wake_up(&Adapter->process_rx_cntrlpkt);
+
+				Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
+					!Adapter->bShutStatus, (5 * HZ));
+
+				if(Status == -ERESTARTSYS)
+					return Status;
+
+				if(Adapter->bShutStatus)
+				{
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Shutdown Mode Wake up Failed - No Wake Up Received\n");
+					return STATUS_FAILURE;
+				}
+			}
+			else
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Wakeup has been tried already...\n");
+			}
+		}
+
+	}
+	if(TRUE == Adapter->IdleMode)
+	{
+		//BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Device is in Idle mode ... hence \n");
+		if(pLeader->Status == LINK_UP_CONTROL_REQ || pLeader->Status == 0x80 ||
+			pLeader->Status == CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ )
+
+		{
+			if((pLeader->Status == LINK_UP_CONTROL_REQ) && (pLinkReq->szData[0]==LINK_DOWN_REQ_PAYLOAD))
+			{
+				if((pLinkReq->szData[1] == LINK_SYNC_DOWN_SUBTYPE))
+				{
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Link Down Sent in Idle Mode\n");
+					Adapter->usIdleModePattern = ABORT_IDLE_SYNCDOWN;//LINK DOWN sent in Idle Mode
+				}
+				else
+				{
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL,"ABORT_IDLE_MODE pattern is being written\n");
+					Adapter->usIdleModePattern = ABORT_IDLE_REG;
+				}
+			}
+			else
+			{
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL,"ABORT_IDLE_MODE pattern is being written\n");
+					Adapter->usIdleModePattern = ABORT_IDLE_MODE;
+			}
+
+			/*Setting bIdleMode_tx_from_host to TRUE to indicate LED control thread to represent
+			  the wake up from idlemode is from host*/
+			//Adapter->LEDInfo.bIdleMode_tx_from_host = TRUE;
+#if 0
+			if(STATUS_SUCCESS != InterfaceIdleModeWakeup(Adapter))
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Idle Mode Wake up Failed\n");
+				return STATUS_FAILURE;
+			}
+#endif
+			Adapter->bWakeUpDevice = TRUE;
+			wake_up(&Adapter->process_rx_cntrlpkt);
+
+
+
+			if(LINK_DOWN_REQ_PAYLOAD == pLinkReq->szData[0])
+			{
+				// We should not send DREG message down while in idlemode.
+				return STATUS_SUCCESS;
+			}
+
+			Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue,
+				!Adapter->IdleMode, (5 * HZ));
+
+			if(Status == -ERESTARTSYS)
+				return Status;
+
+			if(Adapter->IdleMode)
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Idle Mode Wake up Failed - No Wake Up Received\n");
+				return STATUS_FAILURE;
+			}
+		}
+		else
+			return STATUS_SUCCESS;
+	}
+	//The Driver has to send control messages with a particular VCID
+	pLeader->Vcid = VCID_CONTROL_PACKET;//VCID for control packet.
+
+	/* Allocate skb for Control Packet */
+	pktlen = pLeader->PLength;
+	ctrl_buff = (char *)Adapter->txctlpacket[atomic_read(&Adapter->index_wr_txcntrlpkt)%MAX_CNTRL_PKTS];
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Control packet to be taken =%d and address is =%pincoming address is =%p and packet len=%x",
+								atomic_read(&Adapter->index_wr_txcntrlpkt), ctrl_buff, ioBuffer, pktlen);
+	if(ctrl_buff)
+	{
+		if(pLeader)
+		{
+			if((pLeader->Status == 0x80) ||
+				(pLeader->Status == CM_CONTROL_NEWDSX_MULTICLASSIFIER_REQ))
+			{
+				/*
+				//Restructure the DSX message to handle Multiple classifier Support
+				// Write the Service Flow param Structures directly to the target
+				//and embed the pointers in the DSX messages sent to target.
+				*/
+				//Lets store the current length of the control packet we are transmitting
+				pucAddIndication = (PUCHAR)ioBuffer + LEADER_SIZE;
+				pktlen = pLeader->PLength;
+				Status = StoreCmControlResponseMessage(Adapter,pucAddIndication, &pktlen);
+				if(Status != 1)
+				{
+					ClearTargetDSXBuffer(Adapter,((stLocalSFAddIndicationAlt *)pucAddIndication)->u16TID, FALSE);
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, " Error Restoring The DSX Control Packet. Dsx Buffers on Target may not be Setup Properly ");
+					return STATUS_FAILURE;
+				}
+				/*
+				//update the leader to use the new length
+				//The length of the control packet is length of message being sent + Leader length
+				*/
+				pLeader->PLength = pktlen;
+			}
+		}
+		memset(ctrl_buff, 0, pktlen+LEADER_SIZE);
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Copying the Control Packet Buffer with length=%d\n", pLeader->PLength);
+		*(PLEADER)ctrl_buff=*pLeader;
+		memcpy(ctrl_buff + LEADER_SIZE, ((PUCHAR)ioBuffer + LEADER_SIZE), pLeader->PLength);
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "Enqueuing the Control Packet");
+
+		/*Update the statistics counters */
+		spin_lock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
+		Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost+=pLeader->PLength;
+		Adapter->PackInfo[HiPriority].uiCurrentPacketsOnHost++;
+		atomic_inc(&Adapter->TotalPacketCount);
+		spin_unlock_bh(&Adapter->PackInfo[HiPriority].SFQueueLock);
+
+		Adapter->PackInfo[HiPriority].bValid = TRUE;
+
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "CurrBytesOnHost: %x bValid: %x",
+			Adapter->PackInfo[HiPriority].uiCurrentBytesOnHost,
+			Adapter->PackInfo[HiPriority].bValid);
+		Status=STATUS_SUCCESS;
+		/*Queue the packet for transmission */
+		atomic_inc(&Adapter->index_wr_txcntrlpkt);
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, TX_CONTROL,DBG_LVL_ALL, "Calling transmit_packets");
+		atomic_set(&Adapter->TxPktAvail, 1);
+#ifdef BCM_SHM_INTERFACE
+		virtual_mail_box_interrupt();
+#endif
+		wake_up(&Adapter->tx_packet_wait_queue);
+	}
+	else
+	{
+		Status=-ENOMEM;
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "mem allocation Failed");
+    }
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, TX_CONTROL, DBG_LVL_ALL, "<====");
+	return Status;
+}
+
+/*****************************************************************
+* Function    - SendStatisticsPointerRequest()
+*
+* Description - This function builds and forwards the Statistics
+*				Pointer Request control Packet.
+*
+* Parameters  - Adapter					: Pointer to Adapter structure.
+* 			  - pstStatisticsPtrRequest : Pointer to link request.
+*
+* Returns     - None.
+*****************************************************************/
+VOID SendStatisticsPointerRequest(PMINI_ADAPTER Adapter,
+								PLINK_REQUEST	pstStatisticsPtrRequest)
+{
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "======>");
+	pstStatisticsPtrRequest->Leader.Status = STATS_POINTER_REQ_STATUS;
+	pstStatisticsPtrRequest->Leader.PLength = sizeof(ULONG);//minimum 4 bytes
+	pstStatisticsPtrRequest->szData[0] = STATISTICS_POINTER_REQ;
+
+	CopyBufferToControlPacket(Adapter,pstStatisticsPtrRequest);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "<=====");
+	return;
+}
+
+
+
+void SendLinkDown(PMINI_ADAPTER Adapter)
+{
+	LINK_REQUEST	stLinkDownRequest;
+	memset(&stLinkDownRequest, 0, sizeof(LINK_REQUEST));
+	stLinkDownRequest.Leader.Status=LINK_UP_CONTROL_REQ;
+	stLinkDownRequest.Leader.PLength=sizeof(ULONG);//minimum 4 bytes
+	stLinkDownRequest.szData[0]=LINK_DOWN_REQ_PAYLOAD;
+	Adapter->bLinkDownRequested = TRUE;
+
+	CopyBufferToControlPacket(Adapter,&stLinkDownRequest);
+}
+
+/******************************************************************
+* Function    - LinkMessage()
+*
+* Description - This function builds the Sync-up and Link-up request
+*				packet messages depending on the device Link status.
+*
+* Parameters  - Adapter:	Pointer to the Adapter structure.
+*
+* Returns     - None.
+*******************************************************************/
+__inline VOID LinkMessage(PMINI_ADAPTER Adapter)
+{
+	PLINK_REQUEST	pstLinkRequest=NULL;
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "=====>");
+	if(Adapter->LinkStatus == SYNC_UP_REQUEST && Adapter->AutoSyncup)
+	{
+		pstLinkRequest=kmalloc(sizeof(LINK_REQUEST), GFP_ATOMIC);
+		if(!pstLinkRequest)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "Can not allocate memory for Link request!");
+			return;
+		}
+		memset(pstLinkRequest,0,sizeof(LINK_REQUEST));
+		//sync up request...
+		Adapter->LinkStatus = WAIT_FOR_SYNC;// current link status
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "Requesting For SyncUp...");
+		pstLinkRequest->szData[0]=LINK_UP_REQ_PAYLOAD;
+		pstLinkRequest->szData[1]=LINK_SYNC_UP_SUBTYPE;
+		pstLinkRequest->Leader.Status=LINK_UP_CONTROL_REQ;
+		pstLinkRequest->Leader.PLength=sizeof(ULONG);
+		Adapter->bSyncUpRequestSent = TRUE;
+	}
+	else if(Adapter->LinkStatus == PHY_SYNC_ACHIVED && Adapter->AutoLinkUp)
+	{
+		pstLinkRequest=kmalloc(sizeof(LINK_REQUEST), GFP_ATOMIC);
+		if(!pstLinkRequest)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "Can not allocate memory for Link request!");
+			return;
+		}
+		memset(pstLinkRequest,0,sizeof(LINK_REQUEST));
+		//LINK_UP_REQUEST
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "Requesting For LinkUp...");
+		pstLinkRequest->szData[0]=LINK_UP_REQ_PAYLOAD;
+		pstLinkRequest->szData[1]=LINK_NET_ENTRY;
+		pstLinkRequest->Leader.Status=LINK_UP_CONTROL_REQ;
+		pstLinkRequest->Leader.PLength=sizeof(ULONG);
+	}
+	if(pstLinkRequest)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "Calling CopyBufferToControlPacket");
+		CopyBufferToControlPacket(Adapter, pstLinkRequest);
+		bcm_kfree(pstLinkRequest);
+	}
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LINK_UP_MSG, DBG_LVL_ALL, "LinkMessage <=====");
+	return;
+}
+
+
+/**********************************************************************
+* Function    - StatisticsResponse()
+*
+* Description - This function handles the Statistics response packet.
+*
+* Parameters  - Adapter	: Pointer to the Adapter structure.
+* 			  - pvBuffer: Starting address of Statistic response data.
+*
+* Returns     - None.
+************************************************************************/
+VOID StatisticsResponse(PMINI_ADAPTER Adapter,PVOID pvBuffer)
+{
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "%s====>",__FUNCTION__);
+	Adapter->StatisticsPointer = ntohl(*(PULONG)pvBuffer);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "Stats at %lx", Adapter->StatisticsPointer);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "%s <====",__FUNCTION__);
+	return;
+}
+
+
+/**********************************************************************
+* Function    - LinkControlResponseMessage()
+*
+* Description - This function handles the Link response packets.
+*
+* Parameters  - Adapter	 : Pointer to the Adapter structure.
+* 			  - pucBuffer: Starting address of Link response data.
+*
+* Returns     - None.
+***********************************************************************/
+VOID LinkControlResponseMessage(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
+{
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "=====>");
+
+	if(*pucBuffer==LINK_UP_ACK)
+	{
+		switch(*(pucBuffer+1))
+		{
+			case PHY_SYNC_ACHIVED: //SYNCed UP
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHY_SYNC_ACHIVED");
+
+				if(Adapter->LinkStatus == LINKUP_DONE)
+			   	{
+					beceem_protocol_reset(Adapter);
+				}
+
+				Adapter->usBestEffortQueueIndex=INVALID_QUEUE_INDEX ;
+				Adapter->LinkStatus=PHY_SYNC_ACHIVED;
+
+				if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+				{
+					Adapter->DriverState = NO_NETWORK_ENTRY;
+					wake_up(&Adapter->LEDInfo.notify_led_event);
+				}
+
+				LinkMessage(Adapter);
+				break;
+
+			case LINKUP_DONE:
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "LINKUP_DONE");
+				Adapter->LinkStatus=LINKUP_DONE;
+				Adapter->bPHSEnabled = *(pucBuffer+3);
+               	Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Recieved In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
+				if((FALSE == Adapter->bShutStatus)&&
+					(FALSE == Adapter->IdleMode))
+				{
+					if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+					{
+						Adapter->DriverState = NORMAL_OPERATION;
+						wake_up(&Adapter->LEDInfo.notify_led_event);
+					}
+				}
+				LinkMessage(Adapter);
+				break;
+			case WAIT_FOR_SYNC:
+
+				/*
+				 * Driver to ignore the DREG_RECEIVED
+				 * WiMAX Application should handle this Message
+				 */
+				//Adapter->liTimeSinceLastNetEntry = 0;
+				Adapter->LinkUpStatus = 0;
+				Adapter->LinkStatus = 0;
+				Adapter->usBestEffortQueueIndex=INVALID_QUEUE_INDEX ;
+				Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
+				Adapter->IdleMode = FALSE;
+				beceem_protocol_reset(Adapter);
+
+				break;
+			case LINK_SHUTDOWN_REQ_FROM_FIRMWARE:
+			case COMPLETE_WAKE_UP_NOTIFICATION_FRM_FW:
+			{
+				HandleShutDownModeRequest(Adapter, pucBuffer);
+			}
+				break;
+			default:
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "default case:LinkResponse %x",*(pucBuffer+1));
+				break;
+		}
+	}
+	else if(SET_MAC_ADDRESS_RESPONSE==*pucBuffer)
+	{
+		PUCHAR puMacAddr = (pucBuffer + 1);
+		Adapter->LinkStatus=SYNC_UP_REQUEST;
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "MAC address response, sending SYNC_UP");
+		LinkMessage(Adapter);
+		memcpy(Adapter->dev->dev_addr, puMacAddr, MAC_ADDRESS_SIZE);
+	}
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "%s <=====",__FUNCTION__);
+	return;
+}
+
+void SendIdleModeResponse(PMINI_ADAPTER Adapter)
+{
+	INT status = 0, NVMAccess = 0,lowPwrAbortMsg = 0;
+	struct timeval tv;
+	CONTROL_MESSAGE		stIdleResponse = {{0}};
+	memset(&tv, 0, sizeof(tv));
+	stIdleResponse.Leader.Status  = IDLE_MESSAGE;
+	stIdleResponse.Leader.PLength = IDLE_MODE_PAYLOAD_LENGTH;
+	stIdleResponse.szData[0] = GO_TO_IDLE_MODE_PAYLOAD;
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL," ============>");
+
+	/*********************************
+	**down_trylock -
+	** if [ semaphore is available ]
+	**		 acquire semaphone and return value 0 ;
+	**   else
+	**		 return non-zero value ;
+	**
+	***********************************/
+
+	NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+
+	lowPwrAbortMsg= down_trylock(&Adapter->LowPowerModeSync);
+
+
+	if((NVMAccess || lowPwrAbortMsg || atomic_read(&Adapter->TotalPacketCount)) &&
+		  (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)  )
+	{
+		if(!NVMAccess)
+			up(&Adapter->NVMRdmWrmLock);
+
+		if(!lowPwrAbortMsg)
+			up(&Adapter->LowPowerModeSync);
+
+		stIdleResponse.szData[1] = TARGET_CAN_NOT_GO_TO_IDLE_MODE;//NACK- device access is going on.
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "HOST IS NACKING Idle mode To F/W!!!!!!!!");
+		Adapter->bPreparingForLowPowerMode = FALSE;
+	}
+	else
+	{
+		stIdleResponse.szData[1] = TARGET_CAN_GO_TO_IDLE_MODE; //2;//Idle ACK
+		Adapter->StatisticsPointer = 0;
+
+		/* Wait for the LED to TURN OFF before sending ACK response */
+		if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+		{
+			INT iRetVal = 0;
+
+			/* Wake the LED Thread with IDLEMODE_ENTER State */
+			Adapter->DriverState = LOWPOWER_MODE_ENTER;
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL,"LED Thread is Running..Hence Setting LED Event as IDLEMODE_ENTER jiffies:%ld",jiffies);;
+			wake_up(&Adapter->LEDInfo.notify_led_event);
+
+			/* Wait for 1 SEC for LED to OFF */
+			iRetVal = wait_event_timeout(Adapter->LEDInfo.idleModeSyncEvent, \
+				Adapter->LEDInfo.bIdle_led_off, msecs_to_jiffies(1000));
+
+
+			/* If Timed Out to Sync IDLE MODE Enter, do IDLE mode Exit and Send NACK to device */
+			if(iRetVal <= 0)
+			{
+				stIdleResponse.szData[1] = TARGET_CAN_NOT_GO_TO_IDLE_MODE;//NACK- device access is going on.
+				Adapter->DriverState = NORMAL_OPERATION;
+				wake_up(&Adapter->LEDInfo.notify_led_event);
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "NACKING Idle mode as time out happen from LED side!!!!!!!!");
+			}
+		}
+		if(stIdleResponse.szData[1] == TARGET_CAN_GO_TO_IDLE_MODE)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL,"ACKING IDLE MODE !!!!!!!!!");
+			down(&Adapter->rdmwrmsync);
+			Adapter->bPreparingForLowPowerMode = TRUE;
+			up(&Adapter->rdmwrmsync);
+#ifndef BCM_SHM_INTERFACE
+			//Killing all URBS.
+			if(Adapter->bDoSuspend == TRUE)
+				Bcm_kill_all_URBs((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+
+#endif
+		}
+		else
+		{
+			Adapter->bPreparingForLowPowerMode = FALSE;
+		}
+
+		if(!NVMAccess)
+			up(&Adapter->NVMRdmWrmLock);
+
+		if(!lowPwrAbortMsg)
+			up(&Adapter->LowPowerModeSync);
+
+	}
+	status = CopyBufferToControlPacket(Adapter,&stIdleResponse);
+	if((status != STATUS_SUCCESS))
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"fail to send the Idle mode Request \n");
+		Adapter->bPreparingForLowPowerMode = FALSE;
+#ifndef BCM_SHM_INTERFACE
+		StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+#endif
+	}
+	do_gettimeofday(&tv);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_RX, RX_DPC, DBG_LVL_ALL, "IdleMode Msg submitter to Q :%ld ms", tv.tv_sec *1000 + tv.tv_usec /1000);
+
+}
+
+/******************************************************************
+* Function    - DumpPackInfo()
+*
+* Description - This function dumps the all Queue(PackInfo[]) details.
+*
+* Parameters  - Adapter: Pointer to the Adapter structure.
+*
+* Returns     - None.
+*******************************************************************/
+VOID DumpPackInfo(PMINI_ADAPTER Adapter)
+{
+
+    UINT uiLoopIndex = 0;
+	UINT uiIndex = 0;
+	UINT uiClsfrIndex = 0;
+	S_CLASSIFIER_RULE *pstClassifierEntry = NULL;
+
+	for(uiLoopIndex=0;uiLoopIndex<NO_OF_QUEUES;uiLoopIndex++)
+	{
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"*********** Showing Details Of Queue %d***** ******",uiLoopIndex);
+		if(FALSE == Adapter->PackInfo[uiLoopIndex].bValid)
+		{
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"bValid is FALSE for %X index\n",uiLoopIndex);
+			continue;
+		}
+
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"	Dumping	SF Rule Entry For SFID %lX \n",Adapter->PackInfo[uiLoopIndex].ulSFID);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"	ucDirection %X \n",Adapter->PackInfo[uiLoopIndex].ucDirection);
+		if(Adapter->PackInfo[uiLoopIndex].ucIpVersion == IPV6)
+		{
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"Ipv6 Service Flow \n");
+		}
+		else
+		{
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"Ipv4 Service Flow \n");
+		}
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"	SF Traffic Priority %X \n",Adapter->PackInfo[uiLoopIndex].u8TrafficPriority);
+
+		for(uiClsfrIndex=0;uiClsfrIndex<MAX_CLASSIFIERS;uiClsfrIndex++)
+		{
+			pstClassifierEntry = &Adapter->astClassifierTable[uiClsfrIndex];
+			if(!pstClassifierEntry->bUsed)
+				continue;
+
+			if(pstClassifierEntry->ulSFID != Adapter->PackInfo[uiLoopIndex].ulSFID)
+				continue;
+
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping Classifier Rule Entry For Index: %X Classifier Rule ID : %X\n",uiClsfrIndex,pstClassifierEntry->uiClassifierRuleIndex);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping Classifier Rule Entry For Index: %X usVCID_Value : %X\n",uiClsfrIndex,pstClassifierEntry->usVCID_Value);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping Classifier Rule Entry For Index: %X bProtocolValid : %X\n",uiClsfrIndex,pstClassifierEntry->bProtocolValid);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping	Classifier Rule Entry For Index: %X bTOSValid : %X\n",uiClsfrIndex,pstClassifierEntry->bTOSValid);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping	Classifier Rule Entry For Index: %X bDestIpValid : %X\n",uiClsfrIndex,pstClassifierEntry->bDestIpValid);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tDumping	Classifier Rule Entry For Index: %X bSrcIpValid : %X\n",uiClsfrIndex,pstClassifierEntry->bSrcIpValid);
+
+
+			for(uiIndex=0;uiIndex<MAX_PORT_RANGE;uiIndex++)
+			{
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tusSrcPortRangeLo:%X\n",pstClassifierEntry->usSrcPortRangeLo[uiIndex]);
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tusSrcPortRangeHi:%X\n",pstClassifierEntry->usSrcPortRangeHi[uiIndex]);
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tusDestPortRangeLo:%X\n",pstClassifierEntry->usDestPortRangeLo[uiIndex]);
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tusDestPortRangeHi:%X\n",pstClassifierEntry->usDestPortRangeHi[uiIndex]);
+			}
+
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL," \tucIPSourceAddressLength : 0x%x\n",pstClassifierEntry->ucIPSourceAddressLength);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tucIPDestinationAddressLength : 0x%x\n",pstClassifierEntry->ucIPDestinationAddressLength);
+			for(uiIndex=0;uiIndex<pstClassifierEntry->ucIPSourceAddressLength;uiIndex++)
+			{
+				if(Adapter->PackInfo[uiLoopIndex].ucIpVersion == IPV6)
+				{
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tIpv6 ulSrcIpAddr :\n");
+					DumpIpv6Address(pstClassifierEntry->stSrcIpAddress.ulIpv6Addr);
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tIpv6 ulSrcIpMask :\n");
+					DumpIpv6Address(pstClassifierEntry->stSrcIpAddress.ulIpv6Mask);
+				}
+				else
+				{
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tulSrcIpAddr:%lX\n",pstClassifierEntry->stSrcIpAddress.ulIpv4Addr[uiIndex]);
+				BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tulSrcIpMask:%lX\n",pstClassifierEntry->stSrcIpAddress.ulIpv4Mask[uiIndex]);
+				}
+			}
+			for(uiIndex=0;uiIndex<pstClassifierEntry->ucIPDestinationAddressLength;uiIndex++)
+			{
+				if(Adapter->PackInfo[uiLoopIndex].ucIpVersion == IPV6)
+				{
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tIpv6 ulDestIpAddr :\n");
+					DumpIpv6Address(pstClassifierEntry->stDestIpAddress.ulIpv6Addr);
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tIpv6 ulDestIpMask :\n");
+					DumpIpv6Address(pstClassifierEntry->stDestIpAddress.ulIpv6Mask);
+
+				}
+				else
+				{
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tulDestIpAddr:%lX\n",pstClassifierEntry->stDestIpAddress.ulIpv4Addr[uiIndex]);
+					BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tulDestIpMask:%lX\n",pstClassifierEntry->stDestIpAddress.ulIpv4Mask[uiIndex]);
+				}
+			}
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tucProtocol:0x%X\n",pstClassifierEntry->ucProtocol[0]);
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"\tu8ClassifierRulePriority:%X\n",pstClassifierEntry->u8ClassifierRulePriority);
+
+
+		}
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"ulSFID:%lX\n",Adapter->PackInfo[uiLoopIndex].ulSFID);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"usVCID_Value:%X\n",Adapter->PackInfo[uiLoopIndex].usVCID_Value);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"PhsEnabled: 0x%X\n",Adapter->PackInfo[uiLoopIndex].bHeaderSuppressionEnabled);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiThreshold:%X\n",Adapter->PackInfo[uiLoopIndex].uiThreshold);
+
+
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"bValid:%X\n",Adapter->PackInfo[uiLoopIndex].bValid);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"bActive:%X\n",Adapter->PackInfo[uiLoopIndex].bActive);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"ActivateReqSent: %x", Adapter->PackInfo[uiLoopIndex].bActivateRequestSent);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"u8QueueType:%X\n",Adapter->PackInfo[uiLoopIndex].u8QueueType);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiMaxBucketSize:%X\n",Adapter->PackInfo[uiLoopIndex].uiMaxBucketSize);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiPerSFTxResourceCount:%X\n",atomic_read(&Adapter->PackInfo[uiLoopIndex].uiPerSFTxResourceCount));
+		//DumpDebug(DUMP_INFO,("				bCSSupport:%X\n",Adapter->PackInfo[uiLoopIndex].bCSSupport));
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"CurrQueueDepthOnTarget: %x\n", Adapter->PackInfo[uiLoopIndex].uiCurrentQueueDepthOnTarget);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiCurrentBytesOnHost:%X\n",Adapter->PackInfo[uiLoopIndex].uiCurrentBytesOnHost);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiCurrentPacketsOnHost:%X\n",Adapter->PackInfo[uiLoopIndex].uiCurrentPacketsOnHost);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiDroppedCountBytes:%X\n",Adapter->PackInfo[uiLoopIndex].uiDroppedCountBytes);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiDroppedCountPackets:%X\n",Adapter->PackInfo[uiLoopIndex].uiDroppedCountPackets);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiSentBytes:%X\n",Adapter->PackInfo[uiLoopIndex].uiSentBytes);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiSentPackets:%X\n",Adapter->PackInfo[uiLoopIndex].uiSentPackets);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiCurrentDrainRate:%X\n",Adapter->PackInfo[uiLoopIndex].uiCurrentDrainRate);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiThisPeriodSentBytes:%X\n",Adapter->PackInfo[uiLoopIndex].uiThisPeriodSentBytes);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"liDrainCalculated:%llX\n",Adapter->PackInfo[uiLoopIndex].liDrainCalculated);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiCurrentTokenCount:%X\n",Adapter->PackInfo[uiLoopIndex].uiCurrentTokenCount);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"liLastUpdateTokenAt:%llX\n",Adapter->PackInfo[uiLoopIndex].liLastUpdateTokenAt);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiMaxAllowedRate:%X\n",Adapter->PackInfo[uiLoopIndex].uiMaxAllowedRate);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"uiPendedLast:%X\n",Adapter->PackInfo[uiLoopIndex].uiPendedLast);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"NumOfPacketsSent:%X\n",Adapter->PackInfo[uiLoopIndex].NumOfPacketsSent);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "Direction: %x\n", Adapter->PackInfo[uiLoopIndex].ucDirection);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "CID: %x\n", Adapter->PackInfo[uiLoopIndex].usCID);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "ProtocolValid: %x\n", Adapter->PackInfo[uiLoopIndex].bProtocolValid);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "TOSValid: %x\n", Adapter->PackInfo[uiLoopIndex].bTOSValid);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "DestIpValid: %x\n", Adapter->PackInfo[uiLoopIndex].bDestIpValid);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "SrcIpValid: %x\n", Adapter->PackInfo[uiLoopIndex].bSrcIpValid);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "ActiveSet: %x\n", Adapter->PackInfo[uiLoopIndex].bActiveSet);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "AdmittedSet: %x\n", Adapter->PackInfo[uiLoopIndex].bAdmittedSet);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "AuthzSet: %x\n", Adapter->PackInfo[uiLoopIndex].bAuthorizedSet);
+		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "ClassifyPrority: %x\n", Adapter->PackInfo[uiLoopIndex].bClassifierPriority);
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "uiMaxLatency: %x\n",Adapter->PackInfo[uiLoopIndex].uiMaxLatency);
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "ServiceClassName: %x %x %x %x\n",Adapter->PackInfo[uiLoopIndex].ucServiceClassName[0],Adapter->PackInfo[uiLoopIndex].ucServiceClassName[1],Adapter->PackInfo[uiLoopIndex].ucServiceClassName[2],Adapter->PackInfo[uiLoopIndex].ucServiceClassName[3]);
+//	BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "bHeaderSuppressionEnabled :%X\n", Adapter->PackInfo[uiLoopIndex].bHeaderSuppressionEnabled);
+//		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "uiTotalTxBytes:%X\n", Adapter->PackInfo[uiLoopIndex].uiTotalTxBytes);
+//		BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL, "uiTotalRxBytes:%X\n", Adapter->PackInfo[uiLoopIndex].uiTotalRxBytes);
+//		DumpDebug(DUMP_INFO,("				uiRanOutOfResCount:%X\n",Adapter->PackInfo[uiLoopIndex].uiRanOutOfResCount));
+	}
+
+	for(uiLoopIndex = 0 ; uiLoopIndex < MIBS_MAX_HIST_ENTRIES ; uiLoopIndex++)
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"Adapter->aRxPktSizeHist[%x] = %x\n",uiLoopIndex,Adapter->aRxPktSizeHist[uiLoopIndex]);
+
+	for(uiLoopIndex = 0 ; uiLoopIndex < MIBS_MAX_HIST_ENTRIES ; uiLoopIndex++)
+			BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, DUMP_INFO, DBG_LVL_ALL,"Adapter->aTxPktSizeHist[%x] = %x\n",uiLoopIndex,Adapter->aTxPktSizeHist[uiLoopIndex]);
+
+
+
+	return;
+
+
+}
+
+
+__inline int reset_card_proc(PMINI_ADAPTER ps_adapter)
+{
+	int retval = STATUS_SUCCESS;
+
+#ifndef BCM_SHM_INTERFACE
+    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PS_INTERFACE_ADAPTER psIntfAdapter = NULL;
+	unsigned int value = 0, uiResetValue = 0;
+
+	psIntfAdapter = ((PS_INTERFACE_ADAPTER)(ps_adapter->pvInterfaceAdapter)) ;
+
+	ps_adapter->bDDRInitDone = FALSE;
+
+	if(ps_adapter->chip_id >= T3LPB)
+	{
+		//SYS_CFG register is write protected hence for modifying this reg value, it should be read twice before
+		rdmalt(ps_adapter,SYS_CFG, &value, sizeof(value));
+		rdmalt(ps_adapter,SYS_CFG, &value, sizeof(value));
+
+		//making bit[6...5] same as was before f/w download. this setting force the h/w to
+		//re-populated the SP RAM area with the string descriptor .
+		value = value | (ps_adapter->syscfgBefFwDld & 0x00000060) ;
+		wrmalt(ps_adapter, SYS_CFG, &value, sizeof(value));
+	}
+
+#ifndef BCM_SHM_INTERFACE
+	//killing all submitted URBs.
+	psIntfAdapter->psAdapter->StopAllXaction = TRUE ;
+	Bcm_kill_all_URBs(psIntfAdapter);
+#endif
+	/* Reset the UMA-B Device */
+	if(ps_adapter->chip_id >= T3LPB)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B \n");
+		retval = usb_reset_device(psIntfAdapter->udev);
+
+		psIntfAdapter->psAdapter->StopAllXaction = FALSE ;
+
+		if(retval != STATUS_SUCCESS)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Reset failed with ret value :%d", retval);
+			goto err_exit;
+		}
+		if (ps_adapter->chip_id == BCS220_2 ||
+			ps_adapter->chip_id == BCS220_2BC ||
+			ps_adapter->chip_id == BCS250_BC ||
+				ps_adapter->chip_id == BCS220_3)
+		{
+			retval = rdmalt(ps_adapter,HPM_CONFIG_LDO145, &value, sizeof(value));
+			if( retval < 0)
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"read failed with status :%d",retval);
+				goto err_exit;
+			}
+			//setting 0th bit
+			value |= (1<<0);
+			retval = wrmalt(ps_adapter, HPM_CONFIG_LDO145, &value, sizeof(value));
+			if( retval < 0)
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"write failed with status :%d",retval);
+				goto err_exit;
+			}
+		}
+
+	}
+	else
+	{
+		retval = rdmalt(ps_adapter,0x0f007018, &value, sizeof(value));
+		if( retval < 0) {
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"read failed with status :%d",retval);
+			goto err_exit;
+		}
+		value&=(~(1<<16));
+		retval= wrmalt(ps_adapter, 0x0f007018, &value, sizeof(value)) ;
+		if( retval < 0) {
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"write failed with status :%d",retval);
+			goto err_exit;
+		}
+
+		// Toggling the GPIO 8, 9
+		value = 0;
+		retval = wrmalt(ps_adapter, GPIO_OUTPUT_REGISTER, &value, sizeof(value));
+		if(retval < 0) {
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"write failed with status :%d",retval);
+			goto err_exit;
+		}
+		value = 0x300;
+		retval = wrmalt(ps_adapter, GPIO_MODE_REGISTER, &value, sizeof(value)) ;
+		if(retval < 0) {
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"write failed with status :%d",retval);
+			goto err_exit;
+		}
+		mdelay(50);
+	}
+
+	//ps_adapter->downloadDDR = false;
+
+	if(ps_adapter->bFlashBoot)
+	{
+		//In flash boot mode MIPS state register has reverse polarity.
+		// So just or with setting bit 30.
+		//Make the MIPS in Reset state.
+		rdmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &uiResetValue, sizeof(uiResetValue));
+
+		uiResetValue |=(1<<30);
+		wrmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &uiResetValue, sizeof(uiResetValue));
+	}
+
+	if(ps_adapter->chip_id >= T3LPB)
+	{
+		uiResetValue = 0;
+		//
+		// WA for SYSConfig Issue.
+		// Read SYSCFG Twice to make it writable.
+		//
+		rdmalt(ps_adapter, SYS_CFG, &uiResetValue, sizeof(uiResetValue));
+		if(uiResetValue & (1<<4))
+		{
+			uiResetValue = 0;
+			rdmalt(ps_adapter, SYS_CFG, &uiResetValue, sizeof(uiResetValue));//2nd read to make it writable.
+			uiResetValue &= (~(1<<4));
+			wrmalt(ps_adapter,SYS_CFG, &uiResetValue, sizeof(uiResetValue));
+		}
+
+	}
+	uiResetValue = 0;
+	wrmalt(ps_adapter, 0x0f01186c, &uiResetValue, sizeof(uiResetValue));
+
+err_exit :
+	psIntfAdapter->psAdapter->StopAllXaction = FALSE ;
+#endif
+	return retval;
+}
+
+__inline int run_card_proc(PMINI_ADAPTER ps_adapter )
+{
+	unsigned int value=0;
+	{
+
+		if(rdmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &value, sizeof(value)) < 0) {
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"%s:%d\n", __FUNCTION__, __LINE__);
+			return STATUS_FAILURE;
+		}
+
+		if(ps_adapter->bFlashBoot)
+		{
+
+			value&=(~(1<<30));
+		}
+		else
+		{
+			value |=(1<<30);
+		}
+
+		if(wrmalt(ps_adapter, CLOCK_RESET_CNTRL_REG_1, &value, sizeof(value)) < 0) {
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"%s:%d\n", __FUNCTION__, __LINE__);
+			return STATUS_FAILURE;
+		}
+	}
+	return STATUS_SUCCESS;
+}
+
+int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
+{
+
+	UINT status = STATUS_SUCCESS;
+	UINT value = 0;
+#ifdef BCM_SHM_INTERFACE
+	unsigned char *pConfigFileAddr = (unsigned char *)CPE_MACXVI_CFG_ADDR;
+#endif
+	/*
+ 	 * Create the threads first and then download the
+ 	 * Firm/DDR Settings..
+ 	 */
+
+	if((status = create_worker_threads(ps_adapter))<0)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Cannot create thread");
+		return status;
+	}
+	/*
+ 	 * For Downloading the Firm, parse the cfg file first.
+ 	 */
+	status = bcm_parse_target_params (ps_adapter);
+	if(status){
+		return status;
+	}
+
+#ifndef BCM_SHM_INTERFACE
+	if(ps_adapter->chip_id >= T3LPB)
+	{
+		rdmalt(ps_adapter, SYS_CFG, &value, sizeof (value));
+		ps_adapter->syscfgBefFwDld = value ;
+		if((value & 0x60)== 0)
+		{
+			ps_adapter->bFlashBoot = TRUE;
+		}
+	}
+
+	reset_card_proc(ps_adapter);
+
+	//Initializing the NVM.
+	BcmInitNVM(ps_adapter);
+	status = ddr_init(ps_adapter);
+	if(status)
+	{
+		BCM_DEBUG_PRINT (ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "ddr_init Failed\n");
+		return status;
+	}
+
+	/* Download cfg file */
+	status = buffDnldVerify(ps_adapter,
+							 (PUCHAR)ps_adapter->pstargetparams,
+							 sizeof(STARGETPARAMS),
+							 CONFIG_BEGIN_ADDR);
+	if(status)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Error downloading CFG file");
+		goto OUT;
+	}
+	BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "CFG file downloaded");
+
+	if(register_networkdev(ps_adapter))
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Register Netdevice failed. Cleanup needs to be performed.");
+		return -EIO;
+	}
+
+	if(FALSE == ps_adapter->AutoFirmDld)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoFirmDld Disabled in CFG File..\n");
+		//If Auto f/w download is disable, register the control interface,
+		//register the control interface after the mailbox.
+		if(register_control_device_interface(ps_adapter) < 0)
+		{
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Register Control Device failed. Cleanup needs to be performed.");
+			return -EIO;
+		}
+
+		return STATUS_SUCCESS;
+	}
+
+	/*
+     * Do the LED Settings here. It will be used by the Firmware Download
+     * Thread.
+     */
+
+	/*
+     * 1. If the LED Settings fails, do not stop and do the Firmware download.
+     * 2. This init would happend only if the cfg file is present, else
+     *    call from the ioctl context.
+     */
+
+	status = InitLedSettings (ps_adapter);
+
+	if(status)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_PRINTK, 0, 0,"INIT LED FAILED\n");
+		return status;
+	}
+	if(ps_adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+	{
+		ps_adapter->DriverState = DRIVER_INIT;
+		wake_up(&ps_adapter->LEDInfo.notify_led_event);
+	}
+
+	if(ps_adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+	{
+		ps_adapter->DriverState = FW_DOWNLOAD;
+		wake_up(&ps_adapter->LEDInfo.notify_led_event);
+	}
+
+	value = 0;
+	wrmalt(ps_adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 4, &value, sizeof(value));
+	wrmalt(ps_adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 8, &value, sizeof(value));
+
+	if(ps_adapter->eNVMType == NVM_FLASH)
+	{
+		status = PropagateCalParamsFromFlashToMemory(ps_adapter);
+		if(status)
+		{
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propogation of Cal param failed .." );
+			goto OUT;
+		}
+	}
+#if 0
+	else if(psAdapter->eNVMType == NVM_EEPROM)
+	{
+		PropagateCalParamsFromEEPROMToMemory();
+	}
+#endif
+
+	/* Download Firmare */
+	if ((status = BcmFileDownload( ps_adapter, BIN_FILE, FIRMWARE_BEGIN_ADDR)))
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No Firmware File is present... \n");
+		goto OUT;
+	}
+
+	BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "BIN file downloaded");
+	status = run_card_proc(ps_adapter);
+	if(status)
+	{
+		BCM_DEBUG_PRINT (ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "run_card_proc Failed\n");
+		goto OUT;
+	}
+
+
+	ps_adapter->fw_download_done = TRUE;
+	mdelay(10);
+
+OUT:
+	if(ps_adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+	{
+		ps_adapter->DriverState = FW_DOWNLOAD_DONE;
+		wake_up(&ps_adapter->LEDInfo.notify_led_event);
+	}
+
+#else
+
+	ps_adapter->bDDRInitDone = TRUE;
+	//Initializing the NVM.
+	BcmInitNVM(ps_adapter);
+
+	//Propagating the cal param from Flash to DDR
+	value = 0;
+	wrmalt(ps_adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 4, &value, sizeof(value));
+	wrmalt(ps_adapter, EEPROM_CAL_DATA_INTERNAL_LOC - 8, &value, sizeof(value));
+
+	if(ps_adapter->eNVMType == NVM_FLASH)
+	{
+		status = PropagateCalParamsFromFlashToMemory(ps_adapter);
+		if(status)
+		{
+			printk("\nPropogation of Cal param from flash to DDR failed ..\n" );
+		}
+	}
+
+	//Copy config file param to DDR.
+	memcpy(pConfigFileAddr,ps_adapter->pstargetparams, sizeof(STARGETPARAMS));
+
+	if(register_networkdev(ps_adapter))
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Register Netdevice failed. Cleanup needs to be performed.");
+		return -EIO;
+	}
+
+
+	status = InitLedSettings (ps_adapter);
+	if(status)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_PRINTK, 0, 0,"INIT LED FAILED\n");
+		return status;
+	}
+
+
+	if(register_control_device_interface(ps_adapter) < 0)
+	{
+		BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Register Control Device failed. Cleanup needs to be performed.");
+		return -EIO;
+	}
+
+	ps_adapter->fw_download_done = TRUE;
+#endif
+	return status;
+}
+
+
+int bcm_parse_target_params(PMINI_ADAPTER Adapter)
+{
+#ifdef BCM_SHM_INTERFACE
+	extern void read_cfg_file(PMINI_ADAPTER Adapter);
+#endif
+	struct file 		*flp=NULL;
+	mm_segment_t 	oldfs={0};
+	char *buff = NULL;
+	int len = 0;
+	loff_t	pos = 0;
+
+	buff=(PCHAR)kmalloc(BUFFER_1K, GFP_KERNEL);
+	if(!buff)
+	{
+		return -ENOMEM;
+	}
+	if((Adapter->pstargetparams =
+		kmalloc(sizeof(STARGETPARAMS), GFP_KERNEL)) == NULL)
+	{
+		bcm_kfree(buff);
+		return -ENOMEM;
+	}
+	flp=open_firmware_file(Adapter, CFG_FILE);
+	if(!flp) {
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "NOT ABLE TO OPEN THE %s FILE \n", CFG_FILE);
+		bcm_kfree(buff);
+		bcm_kfree(Adapter->pstargetparams);
+		Adapter->pstargetparams = NULL;
+		return -ENOENT;
+	}
+	oldfs=get_fs();	set_fs(get_ds());
+	len=vfs_read(flp, buff, BUFFER_1K, &pos);
+	set_fs(oldfs);
+
+	if(len != sizeof(STARGETPARAMS))
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"Mismatch in Target Param Structure!\n");
+		bcm_kfree(buff);
+		bcm_kfree(Adapter->pstargetparams);
+		Adapter->pstargetparams = NULL;
+		filp_close(flp, current->files);
+		return -ENOENT;
+	}
+	filp_close(flp, current->files);
+
+	/* Check for autolink in config params */
+	/*
+	 * Values in Adapter->pstargetparams are in network byte order
+	 */
+	memcpy(Adapter->pstargetparams, buff, sizeof(STARGETPARAMS));
+	bcm_kfree (buff);
+	beceem_parse_target_struct(Adapter);
+#ifdef BCM_SHM_INTERFACE
+	read_cfg_file(Adapter);
+
+#endif
+	return STATUS_SUCCESS;
+}
+
+void beceem_parse_target_struct(PMINI_ADAPTER Adapter)
+{
+	UINT uiHostDrvrCfg6 =0, uiEEPROMFlag = 0;;
+
+	if(ntohl(Adapter->pstargetparams->m_u32PhyParameter2) & AUTO_SYNC_DISABLE)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoSyncup is Disabled\n");
+		Adapter->AutoSyncup = FALSE;
+	}
+	else
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoSyncup is Enabled\n");
+		Adapter->AutoSyncup	= TRUE;
+	}
+	if(ntohl(Adapter->pstargetparams->HostDrvrConfig6) & AUTO_LINKUP_ENABLE)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Enabling autolink up");
+		Adapter->AutoLinkUp = TRUE;
+	}
+	else
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Disabling autolink up");
+		Adapter->AutoLinkUp = FALSE;
+	}
+	// Setting the DDR Setting..
+	Adapter->DDRSetting =
+			(ntohl(Adapter->pstargetparams->HostDrvrConfig6) >>8)&0x0F;
+	Adapter->ulPowerSaveMode =
+			(ntohl(Adapter->pstargetparams->HostDrvrConfig6)>>12)&0x0F;
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT,DBG_LVL_ALL, "Power Save Mode: %lx\n",
+							Adapter->ulPowerSaveMode);
+	if(ntohl(Adapter->pstargetparams->HostDrvrConfig6) & AUTO_FIRM_DOWNLOAD)
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Enabling Auto Firmware Download\n");
+        Adapter->AutoFirmDld = TRUE;
+    }
+    else
+    {
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Disabling Auto Firmware Download\n");
+        Adapter->AutoFirmDld = FALSE;
+    }
+	uiHostDrvrCfg6 = ntohl(Adapter->pstargetparams->HostDrvrConfig6);
+	Adapter->bMipsConfig = (uiHostDrvrCfg6>>20)&0x01;
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"MIPSConfig   : 0x%X\n",Adapter->bMipsConfig);
+	//used for backward compatibility.
+	Adapter->bDPLLConfig = (uiHostDrvrCfg6>>19)&0x01;
+
+	Adapter->PmuMode= (uiHostDrvrCfg6 >> 24 ) & 0x03;
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "PMU MODE: %x", Adapter->PmuMode);
+
+    if((uiHostDrvrCfg6 >> HOST_BUS_SUSPEND_BIT ) & (0x01))
+    {
+        Adapter->bDoSuspend = TRUE;
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Making DoSuspend TRUE as per configFile");
+    }
+
+	uiEEPROMFlag = ntohl(Adapter->pstargetparams->m_u32EEPROMFlag);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "uiEEPROMFlag  : 0x%X\n",uiEEPROMFlag);
+	Adapter->eNVMType = (NVM_TYPE)((uiEEPROMFlag>>4)&0x3);
+
+
+	Adapter->bStatusWrite = (uiEEPROMFlag>>6)&0x1;
+	//printk(("bStatusWrite   : 0x%X\n", Adapter->bStatusWrite));
+
+	Adapter->uiSectorSizeInCFG = 1024*(0xFFFF & ntohl(Adapter->pstargetparams->HostDrvrConfig4));
+	//printk(("uiSectorSize   : 0x%X\n", Adapter->uiSectorSizeInCFG));
+
+	Adapter->bSectorSizeOverride =(bool) ((ntohl(Adapter->pstargetparams->HostDrvrConfig4))>>16)&0x1;
+	//printk(MP_INIT,("bSectorSizeOverride   : 0x%X\n",Adapter->bSectorSizeOverride));
+
+	if(ntohl(Adapter->pstargetparams->m_u32PowerSavingModeOptions) &0x01)
+		Adapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE;
+	//autocorrection part
+	if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
+		doPowerAutoCorrection(Adapter);
+
+}
+
+VOID doPowerAutoCorrection(PMINI_ADAPTER psAdapter)
+{
+	UINT reporting_mode = 0;
+
+	reporting_mode = ntohl(psAdapter->pstargetparams->m_u32PowerSavingModeOptions) &0x02 ;
+	psAdapter->bIsAutoCorrectEnabled = !((char)(psAdapter->ulPowerSaveMode >> 3) & 0x1);
+
+	if(reporting_mode == TRUE)
+	{
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"can't do suspen/resume as reporting mode is enable");
+		psAdapter->bDoSuspend = FALSE;
+	}
+
+	if (psAdapter->bIsAutoCorrectEnabled && (psAdapter->chip_id >= T3LPB))
+	{
+		//If reporting mode is enable, switch PMU to PMC
+		#if 0
+		if(reporting_mode == FALSE)
+		{
+			psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN;
+			psAdapter->bDoSuspend = TRUE;
+			BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"PMU selected ....");
+
+		}
+		else
+		#endif
+		{
+			psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_CLOCK_GATING;
+			psAdapter->bDoSuspend =FALSE;
+			BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"PMC selected..");
+
+		}
+
+		//clearing space bit[15..12]
+		psAdapter->pstargetparams->HostDrvrConfig6 &= ~(htonl((0xF << 12)));
+		//placing the power save mode option
+		psAdapter->pstargetparams->HostDrvrConfig6 |= htonl((psAdapter->ulPowerSaveMode << 12));
+
+	}
+	else if (psAdapter->bIsAutoCorrectEnabled == FALSE)
+	{
+
+		// remove the autocorrect disable bit set before dumping.
+		psAdapter->ulPowerSaveMode &= ~(1 << 3);
+		psAdapter->pstargetparams->HostDrvrConfig6 &= ~(htonl(1 << 15));
+		BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"Using Forced User Choice: %lx\n", psAdapter->ulPowerSaveMode);
+	}
+}
+unsigned char *ReadMacAddrEEPROM(PMINI_ADAPTER Adapter, ulong dwAddress)
+{
+	unsigned char *pucmacaddr = NULL;
+	int status = 0, i=0;
+	unsigned int temp =0;
+
+
+	pucmacaddr = (unsigned char *)kmalloc(MAC_ADDRESS_SIZE, GFP_KERNEL);
+	if(!pucmacaddr)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "No Buffers to Read the EEPROM Address\n");
+		return NULL;
+	}
+
+	dwAddress |= 0x5b000000;
+	status = wrmalt(Adapter, EEPROM_COMMAND_Q_REG,
+						(PUINT)&dwAddress, sizeof(UINT));
+	if(status != STATUS_SUCCESS)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm Failed..\n");
+		bcm_kfree(pucmacaddr);
+		pucmacaddr = NULL;
+		goto OUT;
+	}
+	for(i=0;i<MAC_ADDRESS_SIZE;i++)
+	{
+		status = rdmalt(Adapter, EEPROM_READ_DATA_Q_REG, &temp,sizeof(temp));
+		if(status != STATUS_SUCCESS)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm Failed..\n");
+			bcm_kfree(pucmacaddr);
+			pucmacaddr = NULL;
+			goto OUT;
+		}
+		pucmacaddr[i] = temp & 0xff;
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,"%x \n", pucmacaddr[i]);
+	}
+OUT:
+	return pucmacaddr;
+}
+
+#if 0
+INT ReadMacAddressFromEEPROM(PMINI_ADAPTER Adapter)
+{
+	unsigned char *puMacAddr = NULL;
+	int i =0;
+
+	puMacAddr = ReadMacAddrEEPROM(Adapter,0x200);
+	if(!puMacAddr)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Couldn't retrieve the Mac Address\n");
+		return STATUS_FAILURE;
+	}
+	else
+	{
+		if((puMacAddr[0] == 0x0  && puMacAddr[1] == 0x0  &&
+			puMacAddr[2] == 0x0  && puMacAddr[3] == 0x0  &&
+			puMacAddr[4] == 0x0  && puMacAddr[5] == 0x0) ||
+		   (puMacAddr[0] == 0xFF && puMacAddr[1] == 0xFF &&
+			puMacAddr[2] == 0xFF && puMacAddr[3] == 0xFF &&
+			puMacAddr[4] == 0xFF && puMacAddr[5] == 0xFF))
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Invalid Mac Address\n");
+			bcm_kfree(puMacAddr);
+			return STATUS_FAILURE;
+		}
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "The Mac Address received is: \n");
+		memcpy(Adapter->dev->dev_addr, puMacAddr, MAC_ADDRESS_SIZE);
+        for(i=0;i<MAC_ADDRESS_SIZE;i++)
+        {
+            BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%02x ", Adapter->dev->dev_addr[i]);
+        }
+        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"\n");
+		bcm_kfree(puMacAddr);
+	}
+	return STATUS_SUCCESS;
+}
+#endif
+
+void convertEndian(B_UINT8 rwFlag, PUINT puiBuffer, UINT uiByteCount)
+{
+	UINT uiIndex = 0;
+
+	if(RWM_WRITE == rwFlag) {
+		for(uiIndex =0; uiIndex < (uiByteCount/sizeof(UINT)); uiIndex++) {
+			puiBuffer[uiIndex] = htonl(puiBuffer[uiIndex]);
+		}
+	} else {
+		for(uiIndex =0; uiIndex < (uiByteCount/sizeof(UINT)); uiIndex++) {
+			puiBuffer[uiIndex] = ntohl(puiBuffer[uiIndex]);
+		}
+	}
+}
+
+#define CACHE_ADDRESS_MASK	0x80000000
+#define UNCACHE_ADDRESS_MASK	0xa0000000
+
+int rdm(PMINI_ADAPTER Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+{
+	INT uiRetVal =0;
+
+#ifndef BCM_SHM_INTERFACE
+	uiRetVal = Adapter->interface_rdm(Adapter->pvInterfaceAdapter,
+			uiAddress, pucBuff, sSize);
+
+	if(uiRetVal < 0)
+		return uiRetVal;
+
+#else
+	int indx;
+	uiRetVal = STATUS_SUCCESS;
+	if(uiAddress & 0x10000000) {
+			// DDR Memory Access
+		uiAddress |= CACHE_ADDRESS_MASK;
+		memcpy(pucBuff,(unsigned char *)uiAddress ,sSize);
+	}
+	else {
+		// Register, SPRAM, Flash
+		uiAddress |= UNCACHE_ADDRESS_MASK;
+    if ((uiAddress & FLASH_ADDR_MASK) == (FLASH_CONTIGIOUS_START_ADDR_BCS350 & FLASH_ADDR_MASK))
+	{
+		#if defined(FLASH_DIRECT_ACCESS)
+        	memcpy(pucBuff,(unsigned char *)uiAddress ,sSize);
+		#else
+			printk("\nInvalid GSPI ACCESS :Addr :%#X", uiAddress);
+			uiRetVal = STATUS_FAILURE;
+		#endif
+	}
+    else if(((unsigned int )uiAddress & 0x3) ||
+			((unsigned int )pucBuff & 0x3) ||
+			((unsigned int )sSize & 0x3)) {
+		  	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"rdmalt :unalligned register access uiAddress =  %x,pucBuff = %x  size = %x\n",(unsigned int )uiAddress,(unsigned int )pucBuff,(unsigned int )sSize);
+			 uiRetVal = STATUS_FAILURE;
+		}
+		else {
+		 	for (indx=0;indx<sSize;indx+=4){
+		   		*(PUINT)(pucBuff + indx) = *(PUINT)(uiAddress + indx);
+		  	}
+		}
+	}
+#endif
+	return uiRetVal;
+}
+int wrm(PMINI_ADAPTER Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+{
+	int iRetVal;
+
+#ifndef BCM_SHM_INTERFACE
+	iRetVal = Adapter->interface_wrm(Adapter->pvInterfaceAdapter,
+			uiAddress, pucBuff, sSize);
+
+#else
+	int indx;
+	if(uiAddress & 0x10000000) {
+		// DDR Memory Access
+		uiAddress |= CACHE_ADDRESS_MASK;
+		memcpy((unsigned char *)(uiAddress),pucBuff,sSize);
+	}
+	else {
+		// Register, SPRAM, Flash
+		uiAddress |= UNCACHE_ADDRESS_MASK;
+
+		if(((unsigned int )uiAddress & 0x3) ||
+			((unsigned int )pucBuff & 0x3) ||
+			((unsigned int )sSize & 0x3)) {
+		  		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"wrmalt: unalligned register access uiAddress =  %x,pucBuff = %x  size = %x\n",(unsigned int )uiAddress,(unsigned int )pucBuff,(unsigned int )sSize);
+			 iRetVal = STATUS_FAILURE;
+		}
+		else {
+		 	for (indx=0;indx<sSize;indx+=4) {
+		  		*(PUINT)(uiAddress + indx) = *(PUINT)(pucBuff + indx);
+			}
+		}
+	}
+	iRetVal = STATUS_SUCCESS;
+#endif
+
+	return iRetVal;
+}
+
+int wrmalt (PMINI_ADAPTER Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+{
+	convertEndian(RWM_WRITE, pucBuff, size);
+	return wrm(Adapter, uiAddress, (PUCHAR)pucBuff, size);
+}
+
+int rdmalt (PMINI_ADAPTER Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+{
+	INT uiRetVal =0;
+
+	uiRetVal = rdm(Adapter,uiAddress,(PUCHAR)pucBuff,size);
+	convertEndian(RWM_READ, (PUINT)pucBuff, size);
+
+	return uiRetVal;
+}
+
+int rdmWithLock(PMINI_ADAPTER Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+{
+
+	INT status = STATUS_SUCCESS ;
+	down(&Adapter->rdmwrmsync);
+
+	if((Adapter->IdleMode == TRUE) ||
+		(Adapter->bShutStatus ==TRUE) ||
+		(Adapter->bPreparingForLowPowerMode ==TRUE))
+	{
+		status = -EACCES;
+		goto exit;
+	}
+
+	status = rdm(Adapter, uiAddress, pucBuff, sSize);
+
+exit:
+	up(&Adapter->rdmwrmsync);
+	return status ;
+}
+int wrmWithLock(PMINI_ADAPTER Adapter, UINT uiAddress, PCHAR pucBuff, size_t sSize)
+{
+	INT status = STATUS_SUCCESS ;
+	down(&Adapter->rdmwrmsync);
+
+	if((Adapter->IdleMode == TRUE) ||
+		(Adapter->bShutStatus ==TRUE) ||
+		(Adapter->bPreparingForLowPowerMode ==TRUE))
+	{
+		status = -EACCES;
+		goto exit;
+	}
+
+	status =wrm(Adapter, uiAddress, pucBuff, sSize);
+
+exit:
+	up(&Adapter->rdmwrmsync);
+	return status ;
+}
+
+int wrmaltWithLock (PMINI_ADAPTER Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+{
+	int iRetVal = STATUS_SUCCESS;
+
+	down(&Adapter->rdmwrmsync);
+
+	if((Adapter->IdleMode == TRUE) ||
+		(Adapter->bShutStatus ==TRUE) ||
+		(Adapter->bPreparingForLowPowerMode ==TRUE))
+	{
+		iRetVal = -EACCES;
+		goto exit;
+	}
+
+	iRetVal = wrmalt(Adapter,uiAddress,pucBuff,size);
+
+exit:
+	up(&Adapter->rdmwrmsync);
+	return iRetVal;
+}
+
+int rdmaltWithLock (PMINI_ADAPTER Adapter, UINT uiAddress, PUINT pucBuff, size_t size)
+{
+	INT uiRetVal =STATUS_SUCCESS;
+
+	down(&Adapter->rdmwrmsync);
+
+	if((Adapter->IdleMode == TRUE) ||
+		(Adapter->bShutStatus ==TRUE) ||
+		(Adapter->bPreparingForLowPowerMode ==TRUE))
+	{
+		uiRetVal = -EACCES;
+		goto exit;
+	}
+
+	uiRetVal = rdmalt(Adapter,uiAddress, pucBuff, size);
+
+exit:
+	up(&Adapter->rdmwrmsync);
+	return uiRetVal;
+}
+
+
+VOID HandleShutDownModeWakeup(PMINI_ADAPTER Adapter)
+{
+	int clear_abort_pattern = 0,Status = 0;
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "====>\n");
+	//target has woken up From Shut Down
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Clearing Shut Down Software abort pattern\n");
+	Status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, (PUINT)&clear_abort_pattern, sizeof(clear_abort_pattern));
+	if(Status)
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL,"WRM to SW_ABORT_IDLEMODE_LOC failed with err:%d", Status);
+		return;
+	}
+	if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
+	{
+		msleep(100);
+		InterfaceHandleShutdownModeWakeup(Adapter);
+		msleep(100);
+	}
+	if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+	{
+		Adapter->DriverState = NO_NETWORK_ENTRY;
+		wake_up(&Adapter->LEDInfo.notify_led_event);
+	}
+
+	Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
+	Adapter->bShutStatus = FALSE;
+	wake_up(&Adapter->lowpower_mode_wait_queue);
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "<====\n");
+}
+
+VOID SendShutModeResponse(PMINI_ADAPTER Adapter)
+{
+	CONTROL_MESSAGE		stShutdownResponse;
+	UINT NVMAccess = 0,lowPwrAbortMsg = 0;
+	UINT Status = 0;
+
+	memset (&stShutdownResponse, 0, sizeof(CONTROL_MESSAGE));
+	stShutdownResponse.Leader.Status  = LINK_UP_CONTROL_REQ;
+	stShutdownResponse.Leader.PLength = 8;//8 bytes;
+	stShutdownResponse.szData[0] = LINK_UP_ACK;
+	stShutdownResponse.szData[1] = LINK_SHUTDOWN_REQ_FROM_FIRMWARE;
+
+	/*********************************
+	**down_trylock -
+	** if [ semaphore is available ]
+	**		 acquire semaphone and return value 0 ;
+	**   else
+	**		 return non-zero value ;
+	**
+	***********************************/
+
+	NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock);
+
+	lowPwrAbortMsg= down_trylock(&Adapter->LowPowerModeSync);
+
+
+	if(NVMAccess || lowPwrAbortMsg|| atomic_read(&Adapter->TotalPacketCount))
+	{
+		if(!NVMAccess)
+			up(&Adapter->NVMRdmWrmLock);
+
+		if(!lowPwrAbortMsg)
+			up(&Adapter->LowPowerModeSync);
+
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Device Access is going on NACK the Shut Down MODE\n");
+		stShutdownResponse.szData[2] = SHUTDOWN_NACK_FROM_DRIVER;//NACK- device access is going on.
+		Adapter->bPreparingForLowPowerMode = FALSE;
+	}
+	else
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "Sending SHUTDOWN MODE ACK\n");
+		stShutdownResponse.szData[2] = SHUTDOWN_ACK_FROM_DRIVER;//ShutDown ACK
+
+		/* Wait for the LED to TURN OFF before sending ACK response */
+		if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
+		{
+			INT iRetVal = 0;
+
+			/* Wake the LED Thread with LOWPOWER_MODE_ENTER State */
+			Adapter->DriverState = LOWPOWER_MODE_ENTER;
+			wake_up(&Adapter->LEDInfo.notify_led_event);
+
+			/* Wait for 1 SEC for LED to OFF */
+			iRetVal = wait_event_timeout(Adapter->LEDInfo.idleModeSyncEvent,\
+				Adapter->LEDInfo.bIdle_led_off, msecs_to_jiffies(1000));
+
+			/* If Timed Out to Sync IDLE MODE Enter, do IDLE mode Exit and Send NACK to device */
+			if(iRetVal <= 0)
+			{
+				stShutdownResponse.szData[1] = SHUTDOWN_NACK_FROM_DRIVER;//NACK- device access is going on.
+
+				Adapter->DriverState = NO_NETWORK_ENTRY;
+				wake_up(&Adapter->LEDInfo.notify_led_event);
+			}
+		}
+
+		if(stShutdownResponse.szData[2] == SHUTDOWN_ACK_FROM_DRIVER)
+		{
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL,"ACKING SHUTDOWN MODE !!!!!!!!!");
+			down(&Adapter->rdmwrmsync);
+			Adapter->bPreparingForLowPowerMode = TRUE;
+			up(&Adapter->rdmwrmsync);
+			//Killing all URBS.
+#ifndef BCM_SHM_INTERFACE
+			if(Adapter->bDoSuspend == TRUE)
+				Bcm_kill_all_URBs((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+#endif
+		}
+		else
+		{
+			Adapter->bPreparingForLowPowerMode = FALSE;
+		}
+
+		if(!NVMAccess)
+			up(&Adapter->NVMRdmWrmLock);
+
+		if(!lowPwrAbortMsg)
+			up(&Adapter->LowPowerModeSync);
+	}
+	Status = CopyBufferToControlPacket(Adapter,&stShutdownResponse);
+	if((Status != STATUS_SUCCESS))
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL,"fail to send the Idle mode Request \n");
+		Adapter->bPreparingForLowPowerMode = FALSE;
+
+#ifndef BCM_SHM_INTERFACE
+		StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
+#endif
+	}
+}
+
+
+void HandleShutDownModeRequest(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
+{
+	B_UINT32 uiResetValue = 0;
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "====>\n");
+
+	if(*(pucBuffer+1) ==  COMPLETE_WAKE_UP_NOTIFICATION_FRM_FW)
+	{
+		HandleShutDownModeWakeup(Adapter);
+	}
+	else if(*(pucBuffer+1) ==  LINK_SHUTDOWN_REQ_FROM_FIRMWARE)
+	{
+		//Target wants to go to Shut Down Mode
+		//InterfacePrepareForShutdown(Adapter);
+		if(Adapter->chip_id == BCS220_2 ||
+		   Adapter->chip_id == BCS220_2BC ||
+		   Adapter->chip_id == BCS250_BC ||
+		   Adapter->chip_id == BCS220_3)
+		{
+			rdmalt(Adapter,HPM_CONFIG_MSW, &uiResetValue, 4);
+			uiResetValue |= (1<<17);
+			wrmalt(Adapter, HPM_CONFIG_MSW, &uiResetValue, 4);
+		}
+
+		SendShutModeResponse(Adapter);
+		BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL,"ShutDownModeResponse:Notification received: Sending the response(Ack/Nack)\n");
+	}
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, MP_SHUTDOWN, DBG_LVL_ALL, "<====\n");
+	return;
+
+}
+
+VOID ResetCounters(PMINI_ADAPTER Adapter)
+{
+
+   	beceem_protocol_reset(Adapter);
+
+	Adapter->CurrNumRecvDescs = 0;
+    Adapter->PrevNumRecvDescs = 0;
+    Adapter->LinkUpStatus = 0;
+	Adapter->LinkStatus = 0;
+    atomic_set(&Adapter->cntrlpktCnt,0);
+    atomic_set (&Adapter->TotalPacketCount,0);
+    Adapter->fw_download_done=FALSE;
+	Adapter->LinkStatus = 0;
+    Adapter->AutoLinkUp = FALSE;
+	Adapter->IdleMode = FALSE;
+	Adapter->bShutStatus = FALSE;
+
+}
+S_CLASSIFIER_RULE *GetFragIPClsEntry(PMINI_ADAPTER Adapter,USHORT usIpIdentification,ULONG SrcIP)
+{
+	UINT uiIndex=0;
+	for(uiIndex=0;uiIndex<MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES;uiIndex++)
+	{
+		if((Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed)&&
+			(Adapter->astFragmentedPktClassifierTable[uiIndex].usIpIdentification == usIpIdentification)&&
+			(Adapter->astFragmentedPktClassifierTable[uiIndex].ulSrcIpAddress== SrcIP)&&
+			!Adapter->astFragmentedPktClassifierTable[uiIndex].bOutOfOrderFragment)
+			return Adapter->astFragmentedPktClassifierTable[uiIndex].pstMatchedClassifierEntry;
+	}
+	return NULL;
+}
+
+void AddFragIPClsEntry(PMINI_ADAPTER Adapter,PS_FRAGMENTED_PACKET_INFO psFragPktInfo)
+{
+	UINT uiIndex=0;
+	for(uiIndex=0;uiIndex<MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES;uiIndex++)
+	{
+		if(!Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed)
+		{
+			memcpy(&Adapter->astFragmentedPktClassifierTable[uiIndex],psFragPktInfo,sizeof(S_FRAGMENTED_PACKET_INFO));
+			break;
+		}
+	}
+
+}
+
+void DelFragIPClsEntry(PMINI_ADAPTER Adapter,USHORT usIpIdentification,ULONG SrcIp)
+{
+	UINT uiIndex=0;
+	for(uiIndex=0;uiIndex<MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES;uiIndex++)
+	{
+		if((Adapter->astFragmentedPktClassifierTable[uiIndex].bUsed)&&
+			(Adapter->astFragmentedPktClassifierTable[uiIndex].usIpIdentification == usIpIdentification)&&
+			(Adapter->astFragmentedPktClassifierTable[uiIndex].ulSrcIpAddress== SrcIp))
+		memset(&Adapter->astFragmentedPktClassifierTable[uiIndex],0,sizeof(S_FRAGMENTED_PACKET_INFO));
+	}
+}
+
+void update_per_cid_rx (PMINI_ADAPTER Adapter)
+{
+	UINT  qindex = 0;
+
+	if((jiffies - Adapter->liDrainCalculated) < XSECONDS)
+		return;
+
+	for(qindex = 0; qindex < HiPriority; qindex++)
+	{
+		if(Adapter->PackInfo[qindex].ucDirection == 0)
+		{
+			Adapter->PackInfo[qindex].uiCurrentRxRate =
+				(Adapter->PackInfo[qindex].uiCurrentRxRate +
+				Adapter->PackInfo[qindex].uiThisPeriodRxBytes)/2;
+
+			Adapter->PackInfo[qindex].uiThisPeriodRxBytes = 0;
+		}
+		else
+		{
+			Adapter->PackInfo[qindex].uiCurrentDrainRate =
+				(Adapter->PackInfo[qindex].uiCurrentDrainRate +
+				Adapter->PackInfo[qindex].uiThisPeriodSentBytes)/2;
+
+			Adapter->PackInfo[qindex].uiThisPeriodSentBytes=0;
+		}
+	}
+	Adapter->liDrainCalculated=jiffies;
+}
+void update_per_sf_desc_cnts( PMINI_ADAPTER Adapter)
+{
+	INT iIndex = 0;
+	u32 uibuff[MAX_TARGET_DSX_BUFFERS];
+
+	if(!atomic_read (&Adapter->uiMBupdate))
+		return;
+
+#ifdef BCM_SHM_INTERFACE
+	if(rdmalt(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (PUINT)uibuff, sizeof(UINT) * MAX_TARGET_DSX_BUFFERS)<0)
+#else
+	if(rdmaltWithLock(Adapter, TARGET_SFID_TXDESC_MAP_LOC, (PUINT)uibuff, sizeof(UINT) * MAX_TARGET_DSX_BUFFERS)<0)
+#endif
+	{
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed\n");
+		return;
+	}
+	for(iIndex = 0;iIndex < HiPriority; iIndex++)
+	{
+		if(Adapter->PackInfo[iIndex].bValid && Adapter->PackInfo[iIndex].ucDirection)
+		{
+			if(Adapter->PackInfo[iIndex].usVCID_Value < MAX_TARGET_DSX_BUFFERS)
+			{
+				atomic_set(&Adapter->PackInfo[iIndex].uiPerSFTxResourceCount, uibuff[Adapter->PackInfo[iIndex].usVCID_Value]);
+			}
+			else
+			{
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Invalid VCID : %x \n",
+					Adapter->PackInfo[iIndex].usVCID_Value);
+			}
+		}
+	}
+	atomic_set (&Adapter->uiMBupdate, FALSE);
+}
+
+void flush_queue(PMINI_ADAPTER Adapter, UINT iQIndex)
+{
+	struct sk_buff* 			PacketToDrop=NULL;
+	struct net_device_stats*		netstats=NULL;
+
+	netstats = &((PLINUX_DEP_DATA)Adapter->pvOsDepData)->netstats;
+
+	spin_lock_bh(&Adapter->PackInfo[iQIndex].SFQueueLock);
+
+	while(Adapter->PackInfo[iQIndex].FirstTxQueue &&
+		atomic_read(&Adapter->TotalPacketCount))
+	{
+		PacketToDrop = Adapter->PackInfo[iQIndex].FirstTxQueue;
+		if(PacketToDrop && PacketToDrop->len)
+		{
+			netstats->tx_dropped++;
+			DEQUEUEPACKET(Adapter->PackInfo[iQIndex].FirstTxQueue, \
+					Adapter->PackInfo[iQIndex].LastTxQueue);
+
+			Adapter->PackInfo[iQIndex].uiCurrentPacketsOnHost--;
+			Adapter->PackInfo[iQIndex].uiCurrentBytesOnHost -= PacketToDrop->len;
+
+			//Adding dropped statistics
+			Adapter->PackInfo[iQIndex].uiDroppedCountBytes += PacketToDrop->len;
+			Adapter->PackInfo[iQIndex].uiDroppedCountPackets++;
+
+			bcm_kfree_skb(PacketToDrop);
+			atomic_dec(&Adapter->TotalPacketCount);
+			atomic_inc(&Adapter->TxDroppedPacketCount);
+
+		}
+	}
+	spin_unlock_bh(&Adapter->PackInfo[iQIndex].SFQueueLock);
+
+}
+
+void beceem_protocol_reset (PMINI_ADAPTER Adapter)
+{
+	int i =0;
+
+	if(NULL != Adapter->dev)
+	{
+		netif_carrier_off(Adapter->dev);
+		netif_stop_queue(Adapter->dev);
+	}
+
+	Adapter->IdleMode = FALSE;
+	Adapter->LinkUpStatus = FALSE;
+	ClearTargetDSXBuffer(Adapter,0, TRUE);
+	//Delete All Classifier Rules
+
+	for(i = 0;i<HiPriority;i++)
+	{
+		DeleteAllClassifiersForSF(Adapter,i);
+	}
+
+	flush_all_queues(Adapter);
+
+	if(Adapter->TimerActive == TRUE)
+		Adapter->TimerActive = FALSE;
+
+	memset(Adapter->astFragmentedPktClassifierTable, 0,
+			sizeof(S_FRAGMENTED_PACKET_INFO) *
+			MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES);
+
+	for(i = 0;i<HiPriority;i++)
+	{
+		//resetting only the first size (S_MIBS_SERVICEFLOW_TABLE) for the SF.
+		// It is same between MIBs and SF.
+		memset((PVOID)&Adapter->PackInfo[i],0,sizeof(S_MIBS_SERVICEFLOW_TABLE));
+	}
+}
+
+
+
+#ifdef BCM_SHM_INTERFACE
+
+
+#define GET_GTB_DIFF(start, end)  \
+( (start) < (end) )? ( (end) - (start) ) : ( ~0x0 - ( (start) - (end)) +1 )
+
+void usdelay ( unsigned int a) {
+	unsigned int start= *(unsigned int *)0xaf8051b4;
+	unsigned int end  = start+1;
+	unsigned int diff = 0;
+
+	while(1) {
+		end = *(unsigned int *)0xaf8051b4;
+		diff = (GET_GTB_DIFF(start,end))/80;
+		if (diff >= a)
+			break;
+	}
+}
+void read_cfg_file(PMINI_ADAPTER Adapter) {
+
+
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Config File Version = 0x%x \n",Adapter->pstargetparams->m_u32CfgVersion );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Center Frequency =  0x%x \n",Adapter->pstargetparams->m_u32CenterFrequency );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Band A Scan = 0x%x \n",Adapter->pstargetparams->m_u32BandAScan );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Band B Scan = 0x%x \n",Adapter->pstargetparams->m_u32BandBScan );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Band C Scan = 0x%x \n",Adapter->pstargetparams->m_u32BandCScan );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"ERTPS Options = 0x%x \n",Adapter->pstargetparams->m_u32ErtpsOptions );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"PHS Enable = 0x%x \n",Adapter->pstargetparams->m_u32PHSEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Handoff Enable = 0x%x \n",Adapter->pstargetparams->m_u32HoEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HO Reserved1 = 0x%x \n",Adapter->pstargetparams->m_u32HoReserved1 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HO Reserved2 = 0x%x \n",Adapter->pstargetparams->m_u32HoReserved2 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"MIMO Enable = 0x%x \n",Adapter->pstargetparams->m_u32MimoEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"PKMv2 Enable = 0x%x \n",Adapter->pstargetparams->m_u32SecurityEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Powersaving Modes Enable = 0x%x \n",Adapter->pstargetparams->m_u32PowerSavingModesEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Power Saving Mode Options = 0x%x \n",Adapter->pstargetparams->m_u32PowerSavingModeOptions );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"ARQ Enable = 0x%x \n",Adapter->pstargetparams->m_u32ArqEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Harq Enable = 0x%x \n",Adapter->pstargetparams->m_u32HarqEnable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"EEPROM Flag = 0x%x \n",Adapter->pstargetparams->m_u32EEPROMFlag );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Customize = 0x%x \n",Adapter->pstargetparams->m_u32Customize );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Bandwidth = 0x%x \n",Adapter->pstargetparams->m_u32ConfigBW );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"ShutDown Timer Value = 0x%x \n",Adapter->pstargetparams->m_u32ShutDownInitThresholdTimer );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RadioParameter = 0x%x \n",Adapter->pstargetparams->m_u32RadioParameter );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"PhyParameter1 = 0x%x \n",Adapter->pstargetparams->m_u32PhyParameter1 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"PhyParameter2 = 0x%x \n",Adapter->pstargetparams->m_u32PhyParameter2 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"PhyParameter3 = 0x%x \n",Adapter->pstargetparams->m_u32PhyParameter3 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"m_u32TestOptions = 0x%x \n",Adapter->pstargetparams->m_u32TestOptions );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"MaxMACDataperDLFrame = 0x%x \n",Adapter->pstargetparams->m_u32MaxMACDataperDLFrame );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"MaxMACDataperULFrame = 0x%x \n",Adapter->pstargetparams->m_u32MaxMACDataperULFrame );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Corr2MacFlags = 0x%x \n",Adapter->pstargetparams->m_u32Corr2MacFlags );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig1 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig1 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig2 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig2 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig3 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig3 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig4 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig4 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig5 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig5 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"HostDrvrConfig6 = 0x%x \n",Adapter->pstargetparams->HostDrvrConfig6 );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Segmented PUSC Enable = 0x%x \n",Adapter->pstargetparams->m_u32SegmentedPUSCenable );
+	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"BamcEnable = 0x%x \n",Adapter->pstargetparams->m_u32BandAMCEnable );
+}
+
+#endif
+
+