diff options
author | Mark Einon <mark.einon@gmail.com> | 2014-09-29 08:55:40 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-29 13:00:23 -0400 |
commit | ccb32b13c79331cc64d81a00f3cca335b7c26c29 (patch) | |
tree | b735b197ee4451e487af4575d384f38c2ca32f27 /drivers/staging/et131x/et131x.c | |
parent | 11889e817eec9fe7c87ed85dc9e1a295c6627f56 (diff) |
staging: et131x: Audit and update comments
Many of the functions and variables in the driver have been renamed and are now
more understandable, as well as defines added for various constants. Update /
remove some comments to reflect this.
Also many comments were unnecessary dialogue describing what is evident
from the code, or comments were just plain incorrect. Remove these too.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/et131x/et131x.c')
-rw-r--r-- | drivers/staging/et131x/et131x.c | 328 |
1 files changed, 21 insertions, 307 deletions
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index c15eb6e55c37..4973e6460e57 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -293,7 +293,6 @@ struct rx_ring { struct rx_status_block *rx_status_block; dma_addr_t rx_status_bus; - /* RECV */ struct list_head recv_list; u32 num_ready_recv; @@ -363,12 +362,7 @@ struct tx_ring { struct tcb *tcb_qhead; struct tcb *tcb_qtail; - /* list of TCBs that are currently being sent. NOTE that access to all - * three of these (including used) are controlled via the - * TCBSendQLock. This lock should be secured prior to incementing / - * decrementing used, or any queue manipulation on send_head / - * tail - */ + /* list of TCBs that are currently being sent. */ struct tcb *send_head; struct tcb *send_tail; int used; @@ -420,16 +414,9 @@ struct rfd { /* Struct to define some device statistics */ struct ce_stats { - /* MIB II variables - * - * NOTE: atomic_t types are only guaranteed to store 24-bits; if we - * MUST have 32, then we'll need another way to perform atomic - * operations - */ u32 multicast_pkts_rcvd; u32 rcvd_pkts_dropped; - /* Tx Statistics. */ u32 tx_underflows; u32 tx_collisions; u32 tx_excessive_collisions; @@ -438,7 +425,6 @@ struct ce_stats { u32 tx_max_pkt_errs; u32 tx_deferred; - /* Rx Statistics. */ u32 rx_overflows; u32 rx_length_errs; u32 rx_align_errs; @@ -504,7 +490,6 @@ struct et131x_adapter { /* Rx Memory Variables */ struct rx_ring rx_ring; - /* Stats */ struct ce_stats stats; }; @@ -519,7 +504,6 @@ static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status) * to 1 prior to starting a single byte read/write */ for (i = 0; i < MAX_NUM_REGISTER_POLLS; i++) { - /* Read registers grouped in DWORD1 */ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP, ®)) return -EIO; @@ -533,13 +517,6 @@ static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status) return -ETIMEDOUT; } -/* eeprom_write - Write a byte to the ET1310's EEPROM - * @adapter: pointer to our private adapter structure - * @addr: the address to write - * @data: the value to write - * - * Returns 1 for a successful write. - */ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) { struct pci_dev *pdev = adapter->pdev; @@ -573,7 +550,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) /* Prepare EEPROM address for Step 3 */ for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { - /* Write the address to the LBCIF Address Register */ if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) break; /* Write the data to the LBCIF Data Register (the I2C write @@ -621,8 +597,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) break; } - /* Set bit 6 of the LBCIF Control Register = 0. - */ udelay(10); while (1) { @@ -651,15 +625,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) return writeok ? 0 : -EIO; } -/* eeprom_read - Read a byte from the ET1310's EEPROM - * @adapter: pointer to our private adapter structure - * @addr: the address from which to read - * @pdata: a pointer to a byte in which to store the value of the read - * @eeprom_id: the ID of the EEPROM - * @addrmode: how the EEPROM is to be accessed - * - * Returns 1 for a successful read - */ static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata) { struct pci_dev *pdev = adapter->pdev; @@ -696,9 +661,7 @@ static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata) * Register. */ *pdata = err; - /* Check bit 2 of the LBCIF Status Register. If = 1, - * then an error has occurred. - */ + return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0; } @@ -707,9 +670,6 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter) struct pci_dev *pdev = adapter->pdev; u8 eestatus; - /* We first need to check the EEPROM Status code located at offset - * 0xB2 of config space - */ pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus); /* THIS IS A WORKAROUND: @@ -760,7 +720,7 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter) adapter->has_eeprom = 1; /* Read the EEPROM for information regarding LED behavior. Refer to - * ET1310_phy.c, et131x_xcvr_init(), for its use. + * et131x_xcvr_init() for its use. */ eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]); eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]); @@ -772,9 +732,6 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter) return 0; } -/* et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310. - * @adapter: pointer to our adapter structure - */ static void et131x_rx_dma_enable(struct et131x_adapter *adapter) { /* Setup the receive dma configuration register for normal operation */ @@ -809,9 +766,6 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter) } } -/* et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310 - * @adapter: pointer to our adapter structure - */ static void et131x_rx_dma_disable(struct et131x_adapter *adapter) { u32 csr; @@ -829,11 +783,6 @@ static void et131x_rx_dma_disable(struct et131x_adapter *adapter) } } -/* et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. - * @adapter: pointer to our adapter structure - * - * Mainly used after a return to the D0 (full-power) state from a lower state. - */ static void et131x_tx_dma_enable(struct et131x_adapter *adapter) { /* Setup the transmit dma configuration register for normal @@ -853,9 +802,6 @@ static inline void add_12bit(u32 *v, int n) *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP); } -/* et1310_config_mac_regs1 - Initialize the first part of MAC regs - * @adapter: pointer to our adapter structure - */ static void et1310_config_mac_regs1(struct et131x_adapter *adapter) { struct mac_regs __iomem *macregs = &adapter->regs->mac; @@ -883,7 +829,6 @@ static void et1310_config_mac_regs1(struct et131x_adapter *adapter) /* Next lets configure the MAC Interface Control register */ writel(0, ¯egs->if_ctrl); - /* Let's move on to setting up the mii management configuration */ writel(ET_MAC_MIIMGMT_CLK_RST, ¯egs->mii_mgmt_cfg); /* Next lets configure the MAC Station Address register. These @@ -915,9 +860,6 @@ static void et1310_config_mac_regs1(struct et131x_adapter *adapter) writel(0, ¯egs->cfg1); } -/* et1310_config_mac_regs2 - Initialize the second part of MAC regs - * @adapter: pointer to our adapter structure - */ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) { int32_t delay = 0; @@ -937,17 +879,15 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) cfg2 &= ~ET_MAC_CFG2_IFMODE_MASK; if (phydev->speed == SPEED_1000) { cfg2 |= ET_MAC_CFG2_IFMODE_1000; - /* Phy mode bit */ ifctrl &= ~ET_MAC_IFCTRL_PHYMODE; } else { cfg2 |= ET_MAC_CFG2_IFMODE_100; ifctrl |= ET_MAC_IFCTRL_PHYMODE; } - /* We need to enable Rx/Tx */ cfg1 |= ET_MAC_CFG1_RX_ENABLE | ET_MAC_CFG1_TX_ENABLE | ET_MAC_CFG1_TX_FLOW; - /* Initialize loop back to off */ + cfg1 &= ~(ET_MAC_CFG1_LOOPBACK | ET_MAC_CFG1_RX_FLOW); if (adapter->flow == FLOW_RXONLY || adapter->flow == FLOW_BOTH) cfg1 |= ET_MAC_CFG1_RX_FLOW; @@ -964,7 +904,6 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) cfg2 &= ~ET_MAC_CFG2_IFMODE_HUGE_FRAME; cfg2 &= ~ET_MAC_CFG2_IFMODE_FULL_DPLX; - /* Turn on duplex if needed */ if (phydev->duplex == DUPLEX_FULL) cfg2 |= ET_MAC_CFG2_IFMODE_FULL_DPLX; @@ -987,22 +926,15 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) cfg1); } - /* Enable txmac */ ctl |= ET_TX_CTRL_TXMAC_ENABLE | ET_TX_CTRL_FC_DISABLE; writel(ctl, &adapter->regs->txmac.ctl); - /* Ready to start the RXDMA/TXDMA engine */ if (adapter->flags & FMP_ADAPTER_LOWER_POWER) { et131x_rx_dma_enable(adapter); et131x_tx_dma_enable(adapter); } } -/* et1310_in_phy_coma - check if the device is in phy coma - * @adapter: pointer to our adapter structure - * - * Returns 0 if the device is not in phy coma, 1 if it is in phy coma - */ static int et1310_in_phy_coma(struct et131x_adapter *adapter) { u32 pmcsr = readl(&adapter->regs->global.pm_csr); @@ -1173,13 +1105,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) else writel(0, &rxmac->mcif_ctrl_max_seg); - /* Initialize the MCIF water marks */ writel(0, &rxmac->mcif_water_mark); - - /* Initialize the MIF control */ writel(0, &rxmac->mif_ctrl); - - /* Initialize the Space Available Register */ writel(0, &rxmac->space_avail); /* Initialize the the mif_ctrl register @@ -1242,12 +1169,6 @@ static void et1310_config_macstat_regs(struct et131x_adapter *adapter) writel(0xFFFE7E8B, &macstat->carry_reg2_mask); } -/* et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC - * @adapter: pointer to our private adapter structure - * @addr: the address of the transceiver - * @reg: the register to read - * @value: pointer to a 16-bit value in which the value will be stored - */ static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, u8 reg, u16 *value) { @@ -1317,11 +1238,6 @@ static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) return et131x_phy_mii_read(adapter, phydev->addr, reg, value); } -/* et131x_mii_write - Write to a PHY reg through the MII interface of the MAC - * @adapter: pointer to our private adapter structure - * @reg: the register to read - * @value: 16-bit value to write - */ static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg, u16 value) { @@ -1388,7 +1304,6 @@ static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter, u16 reg; u16 mask = 1 << bitnum; - /* Read the requested register */ et131x_mii_read(adapter, regnum, ®); *value = (reg & mask) >> bitnum; @@ -1579,10 +1494,7 @@ static void et131x_xcvr_init(struct et131x_adapter *adapter) } } -/* et131x_configure_global_regs - configure JAGCore global regs - * - * Used to configure the global registers on the JAGCore - */ +/* et131x_configure_global_regs - configure JAGCore global regs */ static void et131x_configure_global_regs(struct et131x_adapter *adapter) { struct global_regs __iomem *regs = &adapter->regs->global; @@ -1615,7 +1527,6 @@ static void et131x_configure_global_regs(struct et131x_adapter *adapter) /* Initialize the loopback register. Disable all loopbacks. */ writel(0, ®s->loopback); - /* MSI Register */ writel(0, ®s->msi_config); /* By default, disable the watchdog timer. It will be enabled when @@ -1635,7 +1546,6 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) unsigned long flags; u8 id; - /* Halt RXDMA to perform the reconfigure. */ et131x_rx_dma_disable(adapter); /* Load the completion writeback physical address */ @@ -1644,9 +1554,7 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block)); - /* Set the address and parameters of the packet status ring into the - * 1310's registers - */ + /* Set the address and parameters of the packet status ring */ writel(upper_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_hi); writel(lower_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_lo); writel(rx_local->psr_entries - 1, &rx_dma->psr_num_des); @@ -1692,9 +1600,7 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) fbr_entry++; } - /* Set the address and parameters of Free buffer ring 1 and 0 - * into the 1310's registers - */ + /* Set the address and parameters of Free buffer ring 1 and 0 */ writel(upper_32_bits(fbr->ring_physaddr), base_hi); writel(lower_32_bits(fbr->ring_physaddr), base_lo); writel(fbr->num_entries - 1, num_des); @@ -1755,9 +1661,7 @@ static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter) /* et131x_adapter_setup - Set the adapter up as per cassini+ documentation */ static void et131x_adapter_setup(struct et131x_adapter *adapter) { - /* Configure the JAGCore */ et131x_configure_global_regs(adapter); - et1310_config_mac_regs1(adapter); /* Configure the MMC registers */ @@ -1796,16 +1700,10 @@ static void et131x_soft_reset(struct et131x_adapter *adapter) writel(0, &adapter->regs->mac.cfg1); } -/* et131x_enable_interrupts - enable interrupt - * - * Enable the appropriate interrupts on the ET131x according to our - * configuration - */ static void et131x_enable_interrupts(struct et131x_adapter *adapter) { u32 mask; - /* Enable all global interrupts */ if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) mask = INT_MASK_ENABLE; else @@ -1814,17 +1712,11 @@ static void et131x_enable_interrupts(struct et131x_adapter *adapter) writel(mask, &adapter->regs->global.int_mask); } -/* et131x_disable_interrupts - interrupt disable - * - * Block all interrupts from the et131x device at the device itself - */ static void et131x_disable_interrupts(struct et131x_adapter *adapter) { - /* Disable all global interrupts */ writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); } -/* et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 */ static void et131x_tx_dma_disable(struct et131x_adapter *adapter) { /* Setup the transmit dma configuration register */ @@ -1832,40 +1724,31 @@ static void et131x_tx_dma_disable(struct et131x_adapter *adapter) &adapter->regs->txdma.csr); } -/* et131x_enable_txrx - Enable tx/rx queues */ static void et131x_enable_txrx(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); - /* Enable the Tx and Rx DMA engines (if not already enabled) */ et131x_rx_dma_enable(adapter); et131x_tx_dma_enable(adapter); - /* Enable device interrupts */ if (adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE) et131x_enable_interrupts(adapter); - /* We're ready to move some data, so start the queue */ netif_start_queue(netdev); } -/* et131x_disable_txrx - Disable tx/rx queues */ static void et131x_disable_txrx(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); - /* First thing is to stop the queue */ netif_stop_queue(netdev); - /* Stop the Tx and Rx DMA engines */ et131x_rx_dma_disable(adapter); et131x_tx_dma_disable(adapter); - /* Disable device interrupts */ et131x_disable_interrupts(adapter); } -/* et131x_init_send - Initialize send data structures */ static void et131x_init_send(struct et131x_adapter *adapter) { u32 ct; @@ -1876,14 +1759,9 @@ static void et131x_init_send(struct et131x_adapter *adapter) memset(tcb, 0, sizeof(struct tcb) * NUM_TCB); - /* Go through and set up each TCB */ for (ct = 0; ct++ < NUM_TCB; tcb++) - /* Set the link pointer in HW TCB to the next TCB in the - * chain - */ tcb->next = tcb + 1; - /* Set the tail pointer */ tcb--; tx_ring->tcb_qtail = tcb; tcb->next = NULL; @@ -1892,7 +1770,7 @@ static void et131x_init_send(struct et131x_adapter *adapter) tx_ring->send_tail = NULL; } -/* et1310_enable_phy_coma - called when network cable is unplugged +/* et1310_enable_phy_coma * * driver receive an phy status change interrupt while in D0 and check that * phy_status is down. @@ -1901,23 +1779,11 @@ static void et131x_init_send(struct et131x_adapter *adapter) * -- set gigE PHY in Coma mode * -- wake on phy_interrupt; Perform software reset JAGCore, * re-initialize jagcore and gigE PHY - * - * Add D0-ASPM-PhyLinkDown Support: - * -- while in D0, when there is a phy_interrupt indicating phy link - * down status, call the MPSetPhyComa routine to enter this active - * state power saving mode - * -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt - * indicating linkup status, call the MPDisablePhyComa routine to - * restore JAGCore and gigE PHY */ static void et1310_enable_phy_coma(struct et131x_adapter *adapter) { u32 pmcsr = readl(&adapter->regs->global.pm_csr); - /* Save the GbE PHY speed and duplex modes. Need to restore this - * when cable is plugged back in - */ - /* Stop sending packets. */ adapter->flags |= FMP_ADAPTER_LOWER_POWER; @@ -1933,7 +1799,6 @@ static void et1310_enable_phy_coma(struct et131x_adapter *adapter) writel(pmcsr, &adapter->regs->global.pm_csr); } -/* et1310_disable_phy_coma - Disable the Phy Coma Mode */ static void et1310_disable_phy_coma(struct et131x_adapter *adapter) { u32 pmcsr; @@ -1958,7 +1823,6 @@ static void et1310_disable_phy_coma(struct et131x_adapter *adapter) */ et131x_soft_reset(adapter); - /* setup et1310 as per the documentation ?? */ et131x_adapter_setup(adapter); /* Allow Tx to restart */ @@ -2117,12 +1981,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) return -ENOMEM; } - /* NOTE : dma_alloc_coherent(), used above to alloc DMA regions, - * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses - * are ever returned, make sure the high part is retrieved here before - * storing the adjusted address. - */ - /* Allocate an area of memory for writeback of status information */ rx_ring->rx_status_block = dma_alloc_coherent(&adapter->pdev->dev, sizeof(struct rx_status_block), @@ -2142,7 +2000,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) return 0; } -/* et131x_rx_dma_memory_free - Free all memory allocated within this module */ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) { u8 id; @@ -2263,10 +2120,7 @@ static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) } } -/* NICReturnRFD - Recycle a RFD and put it back onto the receive list - * @adapter: pointer to our adapter - * @rfd: pointer to the RFD - */ +/* nic_return_rfd - Recycle a RFD and put it back onto the receive list */ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) { struct rx_ring *rx_local = &adapter->rx_ring; @@ -2321,8 +2175,6 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) /* nic_rx_pkts - Checks the hardware for available packets * - * Returns rfd, a pointer to our MPRFD. - * * Checks the hardware for available packets, using completion ring * If packets are available, it gets an RFD from the recv_list, attaches * the packet to it, puts the RFD in the RecvPendList, and also returns @@ -2349,7 +2201,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) * Status Ring, and also the two Free Buffer rings. */ status = rx_local->rx_status_block; - word1 = status->word1 >> 16; /* Get the useful bits */ + word1 = status->word1 >> 16; /* Check the PSR and wrap bits do not match */ if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF)) @@ -2438,10 +2290,6 @@ out: return rfd; } -/* et131x_handle_recv_pkts - Interrupt handler for receive processing - * - * Assumption, Rcv spinlock has been acquired. - */ static int et131x_handle_recv_pkts(struct et131x_adapter *adapter, int budget) { struct rfd *rfd = NULL; @@ -2476,10 +2324,8 @@ static int et131x_handle_recv_pkts(struct et131x_adapter *adapter, int budget) rfd->len == 0) continue; - /* Increment the number of packets we received */ adapter->netdev->stats.rx_packets++; - /* Set the status on the packet, either resources or success */ if (rx_ring->num_ready_recv < RFD_LOW_WATER_MARK) dev_warn(&adapter->pdev->dev, "RFD's are running out\n"); @@ -2528,14 +2374,6 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) return -ENOMEM; } - /* Save physical address - * - * NOTE: dma_alloc_coherent(), used above to alloc DMA regions, - * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses - * are ever returned, make sure the high part is retrieved here before - * storing the adjusted address. - */ - /* Allocate memory for the Tx status block */ tx_ring->tx_status = dma_alloc_coherent(&adapter->pdev->dev, sizeof(u32), &tx_ring->tx_status_pa, @@ -2548,7 +2386,6 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) return 0; } -/* et131x_tx_dma_memory_free - Free all memory allocated within this module */ static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) { int desc_size = 0; @@ -2577,14 +2414,11 @@ static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) kfree(tx_ring->tcb_ring); } -/* nic_send_packet - NIC specific send handler for version B silicon. - * @adapter: pointer to our adapter - * @tcb: pointer to struct tcb - */ +/* nic_send_packet - NIC specific send handler for version B silicon. */ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) { u32 i; - struct tx_desc desc[24]; /* 24 x 16 byte */ + struct tx_desc desc[24]; u32 frag = 0; u32 thiscopy, remainder; struct sk_buff *skb = tcb->skb; @@ -2597,10 +2431,6 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) /* Part of the optimizations of this send routine restrict us to * sending 24 fragments at a pass. In practice we should never see * more than 5 fragments. - * - * NOTE: The older version of this function (below) can handle any - * number of fragments. If needed, we can call this function, - * although it is less efficient. */ /* nr_frags should be no more than 18. */ @@ -2752,10 +2582,6 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) return 0; } -/* send_packet - Do the work to send a packet - * - * Assumption: Send spinlock has been acquired - */ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) { int status; @@ -2767,7 +2593,6 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) if (skb->len < ETH_HLEN) return -EIO; - /* Get a TCB for this packet */ spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); tcb = tx_ring->tcb_qhead; @@ -2787,7 +2612,6 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) tcb->skb = skb; tcb->next = NULL; - /* Call the NIC specific send handler. */ status = nic_send_packet(adapter, tcb); if (status != 0) { @@ -2807,13 +2631,7 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) return 0; } -/* free_send_packet - Recycle a struct tcb - * @adapter: pointer to our adapter - * @tcb: pointer to struct tcb - * - * Complete the packet if necessary - * Assumption - Send spinlock has been acquired - */ +/* free_send_packet - Recycle a struct tcb */ static inline void free_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) { @@ -2861,8 +2679,7 @@ static inline void free_send_packet(struct et131x_adapter *adapter, if (tx_ring->tcb_qtail) tx_ring->tcb_qtail->next = tcb; - else - /* Apparently ready Q is empty. */ + else /* Apparently ready Q is empty. */ tx_ring->tcb_qhead = tcb; tx_ring->tcb_qtail = tcb; @@ -2871,10 +2688,7 @@ static inline void free_send_packet(struct et131x_adapter *adapter, WARN_ON(tx_ring->used < 0); } -/* et131x_free_busy_send_packets - Free and complete the stopped active sends - * - * Assumption - Send spinlock has been acquired - */ +/* et131x_free_busy_send_packets - Free and complete the stopped active sends */ static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) { struct tcb *tcb; @@ -2914,12 +2728,10 @@ static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) tx_ring->used = 0; } -/* et131x_handle_send_pkts - Interrupt handler for sending processing +/* et131x_handle_send_pkts * * Re-claim the send resources, complete sends and get more to send from * the send wait queue. - * - * Assumption - Send spinlock has been acquired */ static void et131x_handle_send_pkts(struct et131x_adapter *adapter) { @@ -3173,7 +2985,7 @@ static struct ethtool_ops et131x_ethtool_ops = { .get_link = ethtool_op_get_link, }; -/* et131x_hwaddr_init - set up the MAC Address on the ET1310 */ +/* et131x_hwaddr_init - set up the MAC Address */ static void et131x_hwaddr_init(struct et131x_adapter *adapter) { /* If have our default mac from init and no mac address from @@ -3200,11 +3012,6 @@ static void et131x_hwaddr_init(struct et131x_adapter *adapter) } } -/* et131x_pci_init - initial PCI setup - * - * Perform the initial setup of PCI registers and if possible initialise - * the MAC address. At this point the I/O registers have yet to be mapped - */ static int et131x_pci_init(struct et131x_adapter *adapter, struct pci_dev *pdev) { @@ -3220,8 +3027,6 @@ static int et131x_pci_init(struct et131x_adapter *adapter, goto err_out; } - /* Let's set up the PORT LOGIC Register. */ - /* Program the Ack/Nak latency and replay timers */ max_payload = pdev->pcie_mpss; @@ -3323,21 +3128,16 @@ static void et131x_error_timer_handler(unsigned long data) mod_timer(&adapter->error_timer, jiffies + TX_ERROR_PERIOD * HZ / 1000); } -/* et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx */ static void et131x_adapter_memory_free(struct et131x_adapter *adapter) { et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); } -/* et131x_adapter_memory_alloc - * Allocate all the memory blocks for send, receive and others. - */ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) { int status; - /* Allocate memory for the Tx Ring */ status = et131x_tx_dma_memory_alloc(adapter); if (status) { dev_err(&adapter->pdev->dev, @@ -3345,7 +3145,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) et131x_tx_dma_memory_free(adapter); return status; } - /* Receive buffer memory allocation */ + status = et131x_rx_dma_memory_alloc(adapter); if (status) { dev_err(&adapter->pdev->dev, @@ -3354,7 +3154,6 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) return status; } - /* Init receive data structures */ status = et131x_init_recv(adapter); if (status) { dev_err(&adapter->pdev->dev, "et131x_init_recv FAILED\n"); @@ -3435,10 +3234,7 @@ static void et131x_adjust_link(struct net_device *netdev) PHY_MPHY_CONTROL_REG, register18); } - /* Free the packets being actively sent & stopped */ et131x_free_busy_send_packets(adapter); - - /* Re-initialize the send structures */ et131x_init_send(adapter); /* Bring the device back to the state it was during @@ -3448,10 +3244,8 @@ static void et131x_adjust_link(struct net_device *netdev) */ et131x_soft_reset(adapter); - /* Setup ET1310 as per the documentation */ et131x_adapter_setup(adapter); - /* perform reset of tx/rx */ et131x_disable_txrx(netdev); et131x_enable_txrx(netdev); } @@ -3499,11 +3293,6 @@ static int et131x_mii_probe(struct net_device *netdev) return 0; } -/* et131x_adapter_init - * - * Initialize the data structures for the et131x_adapter object and link - * them together with the platform provided device structures. - */ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, struct pci_dev *pdev) { @@ -3511,30 +3300,21 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, struct et131x_adapter *adapter; - /* Allocate private adapter struct and copy in relevant information */ adapter = netdev_priv(netdev); adapter->pdev = pci_dev_get(pdev); adapter->netdev = netdev; - /* Initialize spinlocks here */ spin_lock_init(&adapter->tcb_send_qlock); spin_lock_init(&adapter->tcb_ready_qlock); spin_lock_init(&adapter->rcv_lock); adapter->registry_jumbo_packet = 1514; /* 1514-9216 */ - /* Set the MAC address to a default */ ether_addr_copy(adapter->addr, default_mac); return adapter; } -/* et131x_pci_remove - * - * Registered in the pci_driver structure, this function is called when the - * PCI subsystem detects that a PCI device which matches the information - * contained in the pci_device_id table has been removed. - */ static void et131x_pci_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -3556,7 +3336,6 @@ static void et131x_pci_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -/* et131x_up - Bring up a device for use. */ static void et131x_up(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -3565,7 +3344,6 @@ static void et131x_up(struct net_device *netdev) phy_start(adapter->phydev); } -/* et131x_down - Bring down the device */ static void et131x_down(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -3609,12 +3387,6 @@ static int et131x_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); -/* et131x_isr - The Interrupt Service Routine for the driver. - * @irq: the IRQ on which the interrupt was received. - * @dev_id: device-specific info (here a pointer to a net_device struct) - * - * Returns a value indicating if the interrupt was handled. - */ static irqreturn_t et131x_isr(int irq, void *dev_id) { bool handled = true; @@ -3632,16 +3404,8 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) goto out; } - /* If the adapter is in low power state, then it should not - * recognize any interrupt - */ - - /* Disable Device Interrupts */ et131x_disable_interrupts(adapter); - /* Get a copy of the value in the interrupt status register - * so we can process the interrupting section - */ status = readl(&adapter->regs->global.int_status); if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) @@ -3682,7 +3446,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) if (!status) goto out; - /* Handle the TXDMA Error interrupt */ if (status & ET_INTR_TXDMA_ERR) { /* Following read also clears the register (COR) */ u32 txdma_err = readl(&iomem->txdma.tx_dma_error); @@ -3692,7 +3455,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) txdma_err); } - /* Handle Free Buffer Ring 0 and 1 Low interrupt */ if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) { /* This indicates the number of unused buffers in RXDMA free * buffer ring 0 is <= the limit you programmed. Free buffer @@ -3732,7 +3494,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) */ } - /* Handle RXDMA Error Interrupt */ if (status & ET_INTR_RXDMA_ERR) { /* The rxdma_error interrupt is sent when a time-out on a * request issued by the JAGCore has occurred or a completion is @@ -3758,13 +3519,11 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) if (status & ET_INTR_WOL) { /* This is a secondary interrupt for wake on LAN. The driver * should never see this, if it does, something serious is - * wrong. We will TRAP the message when we are in DBG mode, - * otherwise we will ignore it. + * wrong. */ dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n"); } - /* Let's move on to the TxMac */ if (status & ET_INTR_TXMAC) { u32 err = readl(&iomem->txmac.err); @@ -3784,14 +3543,11 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) */ } - /* Handle RXMAC Interrupt */ if (status & ET_INTR_RXMAC) { /* These interrupts are catastrophic to the device, what we need * to do is disable the interrupts and set the flag to cause us * to reset so we can solve this issue. */ - /* MP_SET_FLAG( adapter, FMP_ADAPTER_HARDWARE_ERROR); */ - dev_warn(&adapter->pdev->dev, "RXMAC interrupt, error 0x%08x. Requesting reset\n", readl(&iomem->rxmac.err_reg)); @@ -3806,7 +3562,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) */ } - /* Handle MAC_STAT Interrupt */ if (status & ET_INTR_MAC_STAT) { /* This means at least one of the un-masked counters in the * MAC_STAT block has rolled over. Use this to maintain the top, @@ -3815,7 +3570,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) et1310_handle_macstat_interrupt(adapter); } - /* Handle SLV Timeout Interrupt */ if (status & ET_INTR_SLV_TIMEOUT) { /* This means a timeout has occurred on a read or write request * to one of the JAGCore registers. The Global Resources block @@ -3882,7 +3636,6 @@ static struct net_device_stats *et131x_stats(struct net_device *netdev) return stats; } -/* et131x_open - Open the device for use. */ static int et131x_open(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -3913,7 +3666,6 @@ static int et131x_open(struct net_device *netdev) return result; } -/* et131x_close - Close the device */ static int et131x_close(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -3928,11 +3680,6 @@ static int et131x_close(struct net_device *netdev) return del_timer_sync(&adapter->error_timer); } -/* et131x_ioctl - The I/O Control handler for the driver - * @netdev: device on which the control request is being made - * @reqbuf: a pointer to the IOCTL request buffer - * @cmd: the IOCTL command code - */ static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { @@ -3944,11 +3691,7 @@ static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, return phy_mii_ioctl(adapter->phydev, reqbuf, cmd); } -/* et131x_set_packet_filter - Configures the Rx Packet filtering on the device - * @adapter: pointer to our private adapter structure - * - * FIXME: lot of dups with MAC code - */ +/* et131x_set_packet_filter - Configures the Rx Packet filtering */ static int et131x_set_packet_filter(struct et131x_adapter *adapter) { int filter = adapter->packet_filter; @@ -3958,9 +3701,7 @@ static int et131x_set_packet_filter(struct et131x_adapter *adapter) ctrl = readl(&adapter->regs->rxmac.ctrl); pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl); - /* Default to disabled packet filtering. Enable it in the individual - * case statements that require the device to filter something - */ + /* Default to disabled packet filtering */ ctrl |= 0x04; /* Set us to be in promiscuous mode so we receive everything, this @@ -4006,7 +3747,6 @@ static int et131x_set_packet_filter(struct et131x_adapter *adapter) return 0; } -/* et131x_multicast - The handler to configure multicasting on the interface */ static void et131x_multicast(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4065,7 +3805,6 @@ static void et131x_multicast(struct net_device *netdev) et131x_set_packet_filter(adapter); } -/* et131x_tx - The handler to tx a packet on the device */ static netdev_tx_t et131x_tx(struct sk_buff *skb, struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4148,29 +3887,24 @@ static void et131x_tx_timeout(struct net_device *netdev) } } -/* et131x_change_mtu - The handler called to change the MTU for the device */ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) { int result = 0; struct et131x_adapter *adapter = netdev_priv(netdev); - /* Make sure the requested MTU is valid */ if (new_mtu < 64 || new_mtu > 9216) return -EINVAL; et131x_disable_txrx(netdev); - /* Set the new MTU */ netdev->mtu = new_mtu; - /* Free Rx DMA memory */ et131x_adapter_memory_free(adapter); /* Set the config parameter for Jumbo Packet support */ adapter->registry_jumbo_packet = new_mtu + 14; et131x_soft_reset(adapter); - /* Alloc and init Rx DMA memory */ result = et131x_adapter_memory_alloc(adapter); if (result != 0) { dev_warn(&adapter->pdev->dev, @@ -4179,7 +3913,6 @@ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) } et131x_init_send(adapter); - et131x_hwaddr_init(adapter); ether_addr_copy(netdev->dev_addr, adapter->addr); @@ -4203,15 +3936,6 @@ static const struct net_device_ops et131x_netdev_ops = { .ndo_do_ioctl = et131x_ioctl, }; -/* et131x_pci_setup - Perform device initialization - * @pdev: a pointer to the device's pci_dev structure - * @ent: this device's entry in the pci_device_id table - * - * Registered in the pci_driver structure, this function is called when the - * PCI subsystem finds a new PCI device which matches the information - * contained in the pci_device_id table. This routine is the equivalent to - * a device insertion routine. - */ static int et131x_pci_setup(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -4249,7 +3973,6 @@ static int et131x_pci_setup(struct pci_dev *pdev, goto err_release_res; } - /* Allocate netdev and private adapter structs */ netdev = alloc_etherdev(sizeof(struct et131x_adapter)); if (!netdev) { dev_err(&pdev->dev, "Couldn't alloc netdev struct\n"); @@ -4280,30 +4003,23 @@ static int et131x_pci_setup(struct pci_dev *pdev, /* If Phy COMA mode was enabled when we went down, disable it here. */ writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr); - /* Issue a global reset to the et1310 */ et131x_soft_reset(adapter); - - /* Disable all interrupts (paranoid) */ et131x_disable_interrupts(adapter); - /* Allocate DMA memory */ rc = et131x_adapter_memory_alloc(adapter); if (rc < 0) { dev_err(&pdev->dev, "Could not alloc adapter memory (DMA)\n"); goto err_iounmap; } - /* Init send data structures */ et131x_init_send(adapter); netif_napi_add(netdev, &adapter->napi, et131x_poll, 64); - /* Copy address into the net_device struct */ ether_addr_copy(netdev->dev_addr, adapter->addr); rc = -ENOMEM; - /* Setup the mii_bus struct */ adapter->mii_bus = mdiobus_alloc(); if (!adapter->mii_bus) { dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n"); @@ -4336,7 +4052,6 @@ static int et131x_pci_setup(struct pci_dev *pdev, goto err_mdio_unregister; } - /* Setup et1310 as per the documentation */ et131x_adapter_setup(adapter); /* Init variable for counting how long we do not have link status */ @@ -4350,7 +4065,6 @@ static int et131x_pci_setup(struct pci_dev *pdev, * point */ - /* Register the net_device struct with the Linux network layer */ rc = register_netdev(netdev); if (rc < 0) { dev_err(&pdev->dev, "register_netdev() failed\n"); |