summaryrefslogtreecommitdiff
path: root/drivers/staging/iio
diff options
context:
space:
mode:
authorJonathan Cameron <jic23@kernel.org>2012-04-25 15:55:00 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-04-25 11:12:23 -0700
commit8af2c75a328355c23d68d3f8651ad52af3c7979d (patch)
tree6e4a516128262ac43b19d4ae5a9c88afb2648b68 /drivers/staging/iio
parenta980e046098b0a40eaff5e4e7fcde6cf035b7c06 (diff)
IIO: Move the core abi documentation from staging
This file contains only the most generic elements. Other class specific and device specific ABI documents will follow over time. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/iio')
-rw-r--r--drivers/staging/iio/Documentation/sysfs-bus-iio730
1 files changed, 0 insertions, 730 deletions
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio
deleted file mode 100644
index 2ce4dadaf3f5..000000000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ /dev/null
@@ -1,730 +0,0 @@
-What: /sys/bus/iio/devices/iio:deviceX
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware chip or device accessed by one communication port.
- Corresponds to a grouping of sensor channels. X is the IIO
- index of the device.
-
-What: /sys/bus/iio/devices/triggerX
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- An event driven driver of data capture to an in kernel buffer.
- May be provided by a device driver that also has an IIO device
- based on hardware generated events (e.g. data ready) or
- provided by a separate driver for other hardware (e.g.
- periodic timer, GPIO or high resolution timer).
- Contains trigger type specific elements. These do not
- generalize well and hence are not documented in this file.
- X is the IIO index of the trigger.
-
-What: /sys/bus/iio/devices/iio:deviceX/buffer
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Directory of attributes relating to the buffer for the device.
-
-What: /sys/bus/iio/devices/iio:deviceX/name
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Description of the physical chip / device for device X.
- Typically a part number.
-
-What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency
-What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
-What: /sys/bus/iio/devices/triggerX/sampling_frequency
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Some devices have internal clocks. This parameter sets the
- resulting sampling frequency. In many devices this
- parameter has an effect on input filters etc rather than
- simply controlling when the input is sampled. As this
- effects datardy triggers, hardware buffers and the sysfs
- direct access interfaces, it may be found in any of the
- relevant directories. If it effects all of the above
- then it is to be found in the base device directory.
-
-What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
-What: /sys/.../iio:deviceX/buffer/sampling_frequency_available
-What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- When the internal sampling clock can only take a small
- discrete set of values, this file lists those available.
-
-What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent ADC oversampling. Controls the sampling ratio
- of the digital filter if available.
-
-What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware dependent values supported by the oversampling filter.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw (unscaled no bias removal etc) voltage measurement from
- channel Y. In special cases where the channel does not
- correspond to externally available input one of the named
- versions may be used. The number must always be specified and
- unique to allow association with event codes. Units after
- application of scale and offset are microvolts.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw (unscaled) differential voltage measurement equivalent to
- channel Y - channel Z where these channel numbers apply to the
- physically equivalent inputs when non differential readings are
- separately available. In differential only parts, then all that
- is required is a consistent labeling. Units after application
- of scale and offset are microvolts.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
-KernelVersion: 3.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw capacitance measurement from channel Y. Units after
- application of scale and offset are nanofarads.
-
-What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
-KernelVersion: 3.2
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw differential capacitance measurement equivalent to
- channel Y - channel Z where these channel numbers apply to the
- physically equivalent inputs when non differential readings are
- separately available. In differential only parts, then all that
- is required is a consistent labeling. Units after application
- of scale and offset are nanofarads.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_temp_z_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw (unscaled no bias removal etc) temperature measurement.
- If an axis is specified it generally means that the temperature
- sensor is associated with one part of a compound device (e.g.
- a gyroscope axis). Units after application of scale and offset
- are milli degrees Celsuis.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Scaled temperature measurement in milli degrees Celsius.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Acceleration in direction x, y or z (may be arbitrarily assigned
- but should match other such assignments on device).
- Has all of the equivalent parameters as per voltageY. Units
- after application of scale and offset are m/s^2.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Angular velocity about axis x, y or z (may be arbitrarily
- assigned) Data converted by application of offset then scale to
- radians per second. Has all the equivalent parameters as
- per voltageY. Units after application of scale and offset are
- radians per second.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Inclination raw reading about axis x, y or z (may be
- arbitrarily assigned). Data converted by application of offset
- and scale to Degrees.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Magnetic field along axis x, y or z (may be arbitrarily
- assigned). Data converted by application of offset
- then scale to Gauss.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
-KernelVersion: 2.6.36
-Contact: linux-iio@vger.kernel.org
-Description:
- Highest value since some reset condition. These
- attributes allow access to this and are otherwise
- the direct equivalent of the <type>Y[_name]_raw attributes.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw
-KernelVersion: 2.6.36
-Contact: linux-iio@vger.kernel.org
-Description:
- A computed peak value based on the sum squared magnitude of
- the underlying value in the specified directions.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
-What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- If known for a device, offset to be added to <type>[Y]_raw prior
- to scaling by <type>[Y]_scale in order to obtain value in the
- <type> units as specified in <type>[y]_raw documentation.
- Not present if the offset is always 0 or unknown. If Y or
- axis <x|y|z> is not present, then the offset applies to all
- in channels of <type>.
- May be writable if a variable offset can be applied on the
- device. Note that this is different to calibbias which
- is for devices (or drivers) that apply offsets to compensate
- for variation between different instances of the part, typically
- adjusted by using some hardware supported calibration procedure.
- Calibbias is applied internally, offset is applied in userspace
- to the _raw output.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
-What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
-What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- If known for a device, scale to be applied to <type>Y[_name]_raw
- post addition of <type>[Y][_name]_offset in order to obtain the
- measured value in <type> units as specified in
- <type>[Y][_name]_raw documentation. If shared across all in
- channels then Y and <x|y|z> are not present and the value is
- called <type>[Y][_name]_scale. The peak modifier means this
- value is applied to <type>Y[_name]_peak_raw values.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
-What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware applied calibration offset. (assumed to fix production
- inaccuracies).
-
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
-what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
-what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Hardware applied calibration scale factor. (assumed to fix
- production inaccuracies). If shared across all channels,
- <type>_calibscale is used.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
-What: /sys/.../iio:deviceX/in_voltageX_scale_available
-What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
-What: /sys/.../iio:deviceX/out_voltageX_scale_available
-What: /sys/.../iio:deviceX/in_capacitance_scale_available
-KernelVersion: 2.635
-Contact: linux-iio@vger.kernel.org
-Description:
- If a discrete set of scale values are available, they
- are listed in this attribute.
-
-What: /sys/.../in_accel_filter_low_pass_3db_frequency
-What: /sys/.../in_magn_filter_low_pass_3db_frequency
-What: /sys/.../in_anglvel_filter_low_pass_3db_frequency
-KernelVersion: 3.2
-Contact: linux-iio@vger.kernel.org
-Description:
- If a known or controllable low pass filter is applied
- to the underlying data channel, then this parameter
- gives the 3dB frequency of the filter in Hz.
-
-What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw (unscaled, no bias etc.) output voltage for
- channel Y. The number must always be specified and
- unique if the output corresponds to a single channel.
-
-What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Raw (unscaled, no bias etc.) output voltage for an aggregate of
- channel Y, channel Z, etc. This interface is available in cases
- where a single output sets the value for multiple channels
- simultaneously.
-
-What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
-What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Specifies the output powerdown mode.
- DAC output stage is disconnected from the amplifier and
- 1kohm_to_gnd: connected to ground via an 1kOhm resistor
- 100kohm_to_gnd: connected to ground via an 100kOhm resistor
- three_state: left floating
- For a list of available output power down options read
- outX_powerdown_mode_available. If Y is not present the
- mode is shared across all outputs.
-
-What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
-What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Lists all available output power down modes.
- If Y is not present the mode is shared across all outputs.
-
-What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
-What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- Writing 1 causes output Y to enter the power down mode specified
- by the corresponding outY_powerdown_mode. Clearing returns to
- normal operation. Y may be suppressed if all outputs are
- controlled together.
-
-What: /sys/bus/iio/devices/iio:deviceX/events
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Configuration of which hardware generated events are passed up
- to user-space.
-
-What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
-What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
-What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Event generated when channel passes a threshold in the specified
- (_rising|_falling) direction. If the direction is not specified,
- then either the device will report an event which ever direction
- a single threshold value is passed in (e.g.
- <type>[Y][_name]_<raw|input>_thresh_value) or
- <type>[Y][_name]_<raw|input>_thresh_rising_value and
- <type>[Y][_name]_<raw|input>_thresh_falling_value may take
- different values, but the device can only enable both thresholds
- or neither.
- Note the driver will assume the last p events requested are
- to be enabled where p is however many it supports (which may
- vary depending on the exact set requested. So if you want to be
- sure you have set what you think you have, check the contents of
- these attributes after everything is configured. Drivers may
- have to buffer any parameters so that they are consistent when
- a given event type is enabled a future point (and not those for
- whatever event was previously enabled).
-
-What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en
-What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en
-What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Event generated when channel passes a threshold on the rate of
- change (1st differential) in the specified (_rising|_falling)
- direction. If the direction is not specified, then either the
- device will report an event which ever direction a single
- threshold value is passed in (e.g.
- <type>[Y][_name]_<raw|input>_roc_value) or
- <type>[Y][_name]_<raw|input>_roc_rising_value and
- <type>[Y][_name]_<raw|input>_roc_falling_value may take
- different values, but the device can only enable both rate of
- change thresholds or neither.
- Note the driver will assume the last p events requested are
- to be enabled where p is however many it supports (which may
- vary depending on the exact set requested. So if you want to be
- sure you have set what you think you have, check the contents of
- these attributes after everything is configured. Drivers may
- have to buffer any parameters so that they are consistent when
- a given event type is enabled a future point (and not those for
- whatever event was previously enabled).
-
-What: /sys/.../events/in_accel_x_raw_thresh_rising_value
-What: /sys/.../events/in_accel_x_raw_thresh_falling_value
-What: /sys/.../events/in_accel_y_raw_thresh_rising_value
-What: /sys/.../events/in_accel_y_raw_thresh_falling_value
-What: /sys/.../events/in_accel_z_raw_thresh_rising_value
-What: /sys/.../events/in_accel_z_raw_thresh_falling_value
-What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value
-What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value
-What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value
-What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value
-What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value
-What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value
-What: /sys/.../events/in_magn_x_raw_thresh_rising_value
-What: /sys/.../events/in_magn_x_raw_thresh_falling_value
-What: /sys/.../events/in_magn_y_raw_thresh_rising_value
-What: /sys/.../events/in_magn_y_raw_thresh_falling_value
-What: /sys/.../events/in_magn_z_raw_thresh_rising_value
-What: /sys/.../events/in_magn_z_raw_thresh_falling_value
-What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value
-What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value
-What: /sys/.../events/in_voltageY_raw_thresh_rising_value
-What: /sys/.../events/in_voltageY_raw_thresh_falling_value
-What: /sys/.../events/in_tempY_raw_thresh_rising_value
-What: /sys/.../events/in_tempY_raw_thresh_falling_value
-What: /sys/.../events/in_illuminance0_thresh_falling_value
-what: /sys/.../events/in_illuminance0_thresh_rising_value
-what: /sys/.../events/in_proximity0_thresh_falling_value
-what: /sys/.../events/in_proximity0_thresh_rising_value
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Specifies the value of threshold that the device is comparing
- against for the events enabled by
- <type>Y[_name]_thresh[_rising|falling]_en.
- If separate attributes exist for the two directions, but
- direction is not specified for this attribute, then a single
- threshold value applies to both directions.
- The raw or input element of the name indicates whether the
- value is in raw device units or in processed units (as _raw
- and _input do on sysfs direct channel read attributes).
-
-What: /sys/.../events/in_accel_x_raw_roc_rising_value
-What: /sys/.../events/in_accel_x_raw_roc_falling_value
-What: /sys/.../events/in_accel_y_raw_roc_rising_value
-What: /sys/.../events/in_accel_y_raw_roc_falling_value
-What: /sys/.../events/in_accel_z_raw_roc_rising_value
-What: /sys/.../events/in_accel_z_raw_roc_falling_value
-What: /sys/.../events/in_anglvel_x_raw_roc_rising_value
-What: /sys/.../events/in_anglvel_x_raw_roc_falling_value
-What: /sys/.../events/in_anglvel_y_raw_roc_rising_value
-What: /sys/.../events/in_anglvel_y_raw_roc_falling_value
-What: /sys/.../events/in_anglvel_z_raw_roc_rising_value
-What: /sys/.../events/in_anglvel_z_raw_roc_falling_value
-What: /sys/.../events/in_magn_x_raw_roc_rising_value
-What: /sys/.../events/in_magn_x_raw_roc_falling_value
-What: /sys/.../events/in_magn_y_raw_roc_rising_value
-What: /sys/.../events/in_magn_y_raw_roc_falling_value
-What: /sys/.../events/in_magn_z_raw_roc_rising_value
-What: /sys/.../events/in_magn_z_raw_roc_falling_value
-What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value
-What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value
-What: /sys/.../events/in_voltageY_raw_roc_rising_value
-What: /sys/.../events/in_voltageY_raw_roc_falling_value
-What: /sys/.../events/in_tempY_raw_roc_rising_value
-What: /sys/.../events/in_tempY_raw_roc_falling_value
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Specifies the value of rate of change threshold that the
- device is comparing against for the events enabled by
- <type>[Y][_name]_roc[_rising|falling]_en.
- If separate attributes exist for the two directions,
- but direction is not specified for this attribute,
- then a single threshold value applies to both directions.
- The raw or input element of the name indicates whether the
- value is in raw device units or in processed units (as _raw
- and _input do on sysfs direct channel read attributes).
-
-What: /sys/.../events/in_accel_x_thresh_rising_period
-What: /sys/.../events/in_accel_x_thresh_falling_period
-hat: /sys/.../events/in_accel_x_roc_rising_period
-What: /sys/.../events/in_accel_x_roc_falling_period
-What: /sys/.../events/in_accel_y_thresh_rising_period
-What: /sys/.../events/in_accel_y_thresh_falling_period
-What: /sys/.../events/in_accel_y_roc_rising_period
-What: /sys/.../events/in_accel_y_roc_falling_period
-What: /sys/.../events/in_accel_z_thresh_rising_period
-What: /sys/.../events/in_accel_z_thresh_falling_period
-What: /sys/.../events/in_accel_z_roc_rising_period
-What: /sys/.../events/in_accel_z_roc_falling_period
-What: /sys/.../events/in_anglvel_x_thresh_rising_period
-What: /sys/.../events/in_anglvel_x_thresh_falling_period
-What: /sys/.../events/in_anglvel_x_roc_rising_period
-What: /sys/.../events/in_anglvel_x_roc_falling_period
-What: /sys/.../events/in_anglvel_y_thresh_rising_period
-What: /sys/.../events/in_anglvel_y_thresh_falling_period
-What: /sys/.../events/in_anglvel_y_roc_rising_period
-What: /sys/.../events/in_anglvel_y_roc_falling_period
-What: /sys/.../events/in_anglvel_z_thresh_rising_period
-What: /sys/.../events/in_anglvel_z_thresh_falling_period
-What: /sys/.../events/in_anglvel_z_roc_rising_period
-What: /sys/.../events/in_anglvel_z_roc_falling_period
-What: /sys/.../events/in_magn_x_thresh_rising_period
-What: /sys/.../events/in_magn_x_thresh_falling_period
-What: /sys/.../events/in_magn_x_roc_rising_period
-What: /sys/.../events/in_magn_x_roc_falling_period
-What: /sys/.../events/in_magn_y_thresh_rising_period
-What: /sys/.../events/in_magn_y_thresh_falling_period
-What: /sys/.../events/in_magn_y_roc_rising_period
-What: /sys/.../events/in_magn_y_roc_falling_period
-What: /sys/.../events/in_magn_z_thresh_rising_period
-What: /sys/.../events/in_magn_z_thresh_falling_period
-What: /sys/.../events/in_magn_z_roc_rising_period
-What: /sys/.../events/in_magn_z_roc_falling_period
-What: /sys/.../events/in_voltageY_supply_thresh_rising_period
-What: /sys/.../events/in_voltageY_supply_thresh_falling_period
-What: /sys/.../events/in_voltageY_supply_roc_rising_period
-What: /sys/.../events/in_voltageY_supply_roc_falling_period
-What: /sys/.../events/in_voltageY_thresh_rising_period
-What: /sys/.../events/in_voltageY_thresh_falling_period
-What: /sys/.../events/in_voltageY_roc_rising_period
-What: /sys/.../events/in_voltageY_roc_falling_period
-What: /sys/.../events/in_tempY_thresh_rising_period
-What: /sys/.../events/in_tempY_thresh_falling_period
-What: /sys/.../events/in_tempY_roc_rising_period
-What: /sys/.../events/in_tempY_roc_falling_period
-What: /sys/.../events/in_accel_x&y&z_mag_falling_period
-What: /sys/.../events/in_intensity0_thresh_period
-What: /sys/.../events/in_proximity0_thresh_period
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Period of time (in seconds) for which the condition must be
- met before an event is generated. If direction is not
- specified then this period applies to both directions.
-
-What: /sys/.../iio:deviceX/events/in_accel_mag_en
-What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_x_mag_en
-What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_y_mag_en
-What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_z_mag_en
-What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en
-What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en
-What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Similar to in_accel_x_thresh[_rising|_falling]_en, but here the
- magnitude of the channel is compared to the threshold, not its
- signed value.
-
-What: /sys/.../events/in_accel_raw_mag_value
-What: /sys/.../events/in_accel_x_raw_mag_rising_value
-What: /sys/.../events/in_accel_y_raw_mag_rising_value
-What: /sys/.../events/in_accel_z_raw_mag_rising_value
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- The value to which the magnitude of the channel is compared. If
- number or direction is not specified, applies to all channels of
- this type.
-
-What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- The name of the trigger source being used, as per string given
- in /sys/class/iio/triggerY/name.
-
-What: /sys/bus/iio/devices/iio:deviceX/buffer/length
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Number of scans contained by the buffer.
-
-What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Bytes per scan. Due to alignment fun, the scan may be larger
- than implied directly by the scan_element parameters.
-
-What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
-KernelVersion: 2.6.35
-Contact: linux-iio@vger.kernel.org
-Description:
- Actually start the buffer capture up. Will start trigger
- if first device and appropriate.
-
-What: /sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Directory containing interfaces for elements that will be
- captured for a single triggered sample set in the buffer.
-
-What: /sys/.../buffer/scan_elements/in_accel_x_en
-What: /sys/.../buffer/scan_elements/in_accel_y_en
-What: /sys/.../buffer/scan_elements/in_accel_z_en
-What: /sys/.../buffer/scan_elements/in_anglvel_x_en
-What: /sys/.../buffer/scan_elements/in_anglvel_y_en
-What: /sys/.../buffer/scan_elements/in_anglvel_z_en
-What: /sys/.../buffer/scan_elements/in_magn_x_en
-What: /sys/.../buffer/scan_elements/in_magn_y_en
-What: /sys/.../buffer/scan_elements/in_magn_z_en
-What: /sys/.../buffer/scan_elements/in_timestamp_en
-What: /sys/.../buffer/scan_elements/in_voltageY_supply_en
-What: /sys/.../buffer/scan_elements/in_voltageY_en
-What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
-What: /sys/.../buffer/scan_elements/in_incli_x_en
-What: /sys/.../buffer/scan_elements/in_incli_y_en
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Scan element control for triggered data capture.
-
-What: /sys/.../buffer/scan_elements/in_accel_type
-What: /sys/.../buffer/scan_elements/in_anglvel_type
-What: /sys/.../buffer/scan_elements/in_magn_type
-What: /sys/.../buffer/scan_elements/in_incli_type
-What: /sys/.../buffer/scan_elements/in_voltageY_type
-What: /sys/.../buffer/scan_elements/in_voltage-in_type
-What: /sys/.../buffer/scan_elements/in_voltageY_supply_type
-What: /sys/.../buffer/scan_elements/in_timestamp_type
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- Description of the scan element data storage within the buffer
- and hence the form in which it is read from user-space.
- Form is [be|le]:[s|u]bits/storagebits[>>shift].
- be or le specifies big or little endian. s or u specifies if
- signed (2's complement) or unsigned. bits is the number of bits
- of data and storagebits is the space (after padding) that it
- occupies in the buffer. shift if specified, is the shift that
- needs to be applied prior to masking out unused bits. Some
- devices put their data in the middle of the transferred elements
- with additional information on both sides. Note that some
- devices will have additional information in the unused bits
- so to get a clean value, the bits value must be used to mask
- the buffer output value appropriately. The storagebits value
- also specifies the data alignment. So s48/64>>2 will be a
- signed 48 bit integer stored in a 64 bit location aligned to
- a a64 bit boundary. To obtain the clean value, shift right 2
- and apply a mask to zero the top 16 bits of the result.
- For other storage combinations this attribute will be extended
- appropriately.
-
-What: /sys/.../buffer/scan_elements/in_accel_type_available
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- If the type parameter can take one of a small set of values,
- this attribute lists them.
-
-What: /sys/.../buffer/scan_elements/in_voltageY_index
-What: /sys/.../buffer/scan_elements/in_voltageY_supply_index
-What: /sys/.../buffer/scan_elements/in_accel_x_index
-What: /sys/.../buffer/scan_elements/in_accel_y_index
-What: /sys/.../buffer/scan_elements/in_accel_z_index
-What: /sys/.../buffer/scan_elements/in_anglvel_x_index
-What: /sys/.../buffer/scan_elements/in_anglvel_y_index
-What: /sys/.../buffer/scan_elements/in_anglvel_z_index
-What: /sys/.../buffer/scan_elements/in_magn_x_index
-What: /sys/.../buffer/scan_elements/in_magn_y_index
-What: /sys/.../buffer/scan_elements/in_magn_z_index
-What: /sys/.../buffer/scan_elements/in_incli_x_index
-What: /sys/.../buffer/scan_elements/in_incli_y_index
-What: /sys/.../buffer/scan_elements/in_timestamp_index
-KernelVersion: 2.6.37
-Contact: linux-iio@vger.kernel.org
-Description:
- A single positive integer specifying the position of this
- scan element in the buffer. Note these are not dependent on
- what is enabled and may not be contiguous. Thus for user-space
- to establish the full layout these must be used in conjunction
- with all _en attributes to establish which channels are present,
- and the relevant _type attributes to establish the data storage
- format.
-
-What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
-KernelVersion: 2.6.38
-Contact: linux-iio@vger.kernel.org
-Description:
- This attribute is used to read the amount of quadrature error
- present in the device at a given time.