diff options
author | Aaro Koskinen <aaro.koskinen@iki.fi> | 2013-10-10 23:25:28 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-10-11 15:45:59 -0700 |
commit | 34b70b9e05ba64c71331622b0263964364d5a351 (patch) | |
tree | c02e8a735ce820b1d7fe1662bba2ab5ef2a7134d /drivers/staging/octeon-usb | |
parent | d8d8e148fd1176fe5ac496478afe4efb67435ae1 (diff) |
staging: octeon-usb: delete cvmx_usbnx_clk_ctl_cn50xx
Add the missing bits to common clk ctl definition, and we can delete
duplicated definitions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/octeon-usb')
-rw-r--r-- | drivers/staging/octeon-usb/cvmx-usbnx-defs.h | 105 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/octeon-hcd.c | 8 |
2 files changed, 15 insertions, 98 deletions
diff --git a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h index c73df649d23b..87e9f330e52f 100644 --- a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h +++ b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h @@ -93,6 +93,16 @@ union cvmx_usbnx_clk_ctl { * suspend. * The value of this field must be set while POR is * active. + * @p_rtype: PHY reference clock type (CN50XX/CN52XX/CN56XX only) + * '0' The USB-PHY uses a 12MHz crystal as a clock + * source at the USB_XO and USB_XI pins + * '1' Reserved + * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock + * at the USB_XO pin. USB_XI should be tied to + * ground in this case. + * '3' Reserved + * (bit 14 was P_XENBN on 3xxx) + * (bit 15 was P_RCLK on 3xxx) * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to * remain powered in Suspend Mode. * '1' The USB-PHY XO Bias, Bandgap and PLL are @@ -147,7 +157,7 @@ union cvmx_usbnx_clk_ctl { uint64_t divide2 : 2; uint64_t hclk_rst : 1; uint64_t p_x_on : 1; - uint64_t reserved_14_15 : 2; + uint64_t p_rtype : 2; uint64_t p_com_on : 1; uint64_t p_c_sel : 2; uint64_t cdiv_byp : 1; @@ -243,99 +253,6 @@ union cvmx_usbnx_clk_ctl { uint64_t divide : 3; } cn30xx; struct cvmx_usbnx_clk_ctl_cn30xx cn31xx; - /** - * struct cvmx_usbnx_clk_ctl_cn50xx - * @divide2: The 'hclk' used by the USB subsystem is derived - * from the eclk. - * Also see the field DIVIDE. DIVIDE2<1> must currently - * be zero because it is not implemented, so the maximum - * ratio of eclk/hclk is currently 16. - * The actual divide number for hclk is: - * (DIVIDE2 + 1) * (DIVIDE + 1) - * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to - * generate the hclk in the USB Subsystem is held - * in reset. This bit must be set to '0' before - * changing the value os DIVIDE in this register. - * The reset to the HCLK_DIVIDERis also asserted - * when core reset is asserted. - * @p_rtype: PHY reference clock type - * '0' The USB-PHY uses a 12MHz crystal as a clock - * source at the USB_XO and USB_XI pins - * '1' Reserved - * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock - * at the USB_XO pin. USB_XI should be tied to - * ground in this case. - * '3' Reserved - * (bit 14 was P_XENBN on 3xxx) - * (bit 15 was P_RCLK on 3xxx) - * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to - * remain powered in Suspend Mode. - * '1' The USB-PHY XO Bias, Bandgap and PLL are - * powered down in suspend mode. - * The value of this field must be set while POR is - * active. - * @p_c_sel: Phy clock speed select. - * Selects the reference clock / crystal frequency. - * '11': Reserved - * '10': 48 MHz (reserved when a crystal is used) - * '01': 24 MHz (reserved when a crystal is used) - * '00': 12 MHz - * The value of this field must be set while POR is - * active. - * NOTE: if a crystal is used as a reference clock, - * this field must be set to 12 MHz. - * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV. - * @sd_mode: Scaledown mode for the USBC. Control timing events - * in the USBC, for normal operation this must be '0'. - * @s_bist: Starts bist on the hclk memories, during the '0' - * to '1' transition. - * @por: Power On Reset for the PHY. - * Resets all the PHYS registers and state machines. - * @enable: When '1' allows the generation of the hclk. When - * '0' the hclk will not be generated. SEE DIVIDE - * field of this register. - * @prst: When this field is '0' the reset associated with - * the phy_clk functionality in the USB Subsystem is - * help in reset. This bit should not be set to '1' - * until the time it takes 6 clocks (hclk or phy_clk, - * whichever is slower) has passed. Under normal - * operation once this bit is set to '1' it should not - * be set to '0'. - * @hrst: When this field is '0' the reset associated with - * the hclk functioanlity in the USB Subsystem is - * held in reset.This bit should not be set to '1' - * until 12ms after phy_clk is stable. Under normal - * operation, once this bit is set to '1' it should - * not be set to '0'. - * @divide: The frequency of 'hclk' used by the USB subsystem - * is the eclk frequency divided by the value of - * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field - * DIVIDE2 of this register. - * The hclk frequency should be less than 125Mhz. - * After writing a value to this field the SW should - * read the field for the value written. - * The ENABLE field of this register should not be set - * until AFTER this field is set and then read. - */ - struct cvmx_usbnx_clk_ctl_cn50xx { - uint64_t reserved_20_63 : 44; - uint64_t divide2 : 2; - uint64_t hclk_rst : 1; - uint64_t reserved_16_16 : 1; - uint64_t p_rtype : 2; - uint64_t p_com_on : 1; - uint64_t p_c_sel : 2; - uint64_t cdiv_byp : 1; - uint64_t sd_mode : 2; - uint64_t s_bist : 1; - uint64_t por : 1; - uint64_t enable : 1; - uint64_t prst : 1; - uint64_t hrst : 1; - uint64_t divide : 3; - } cn50xx; - struct cvmx_usbnx_clk_ctl_cn50xx cn52xx; - struct cvmx_usbnx_clk_ctl_cn50xx cn56xx; }; /** diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c index 1859c050b918..a5c4622fcf03 100644 --- a/drivers/staging/octeon-usb/octeon-hcd.c +++ b/drivers/staging/octeon-usb/octeon-hcd.c @@ -842,10 +842,10 @@ static int cvmx_usb_initialize(struct cvmx_usb_state *usb, usbn_clk_ctl.cn31xx.p_xenbn = 0; } else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) /* From CN56XX,CN50XX manual */ - usbn_clk_ctl.cn56xx.p_rtype = 2; + usbn_clk_ctl.s.p_rtype = 2; else /* From CN52XX manual */ - usbn_clk_ctl.cn52xx.p_rtype = 1; + usbn_clk_ctl.s.p_rtype = 1; switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) { case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ: @@ -869,10 +869,10 @@ static int cvmx_usb_initialize(struct cvmx_usb_state *usb, usbn_clk_ctl.cn31xx.p_xenbn = 1; } else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) /* From CN56XX,CN50XX manual */ - usbn_clk_ctl.cn56xx.p_rtype = 0; + usbn_clk_ctl.s.p_rtype = 0; else /* From CN52XX manual */ - usbn_clk_ctl.cn52xx.p_rtype = 0; + usbn_clk_ctl.s.p_rtype = 0; usbn_clk_ctl.s.p_c_sel = 0; } |