Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
  serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
  tty/serial: Fix break handling for PORT_TEGRA
  tty/serial: Add explicit PORT_TEGRA type
  n_tracerouter and n_tracesink ldisc additions.
  Intel PTI implementaiton of MIPI 1149.7.
  Kernel documentation for the PTI feature.
  export kernel call get_task_comm().
  tty: Remove to support serial for S5P6442
  pch_phub: Support new device ML7223
  8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
  ASoC: Update cx20442 for TTY API change
  pch_uart: Support new device ML7223 IOH
  parport: Use request_muxed_region for IT87 probe and lock
  tty/serial: add support for Xilinx PS UART
  n_gsm: Use print_hex_dump_bytes
  drivers/tty/moxa.c: Put correct tty value
  TTY: tty_io, annotate locking functions
  TTY: serial_core, remove superfluous set_task_state
  TTY: serial_core, remove invalid test
  Char: moxa, fix locking in moxa_write
  ...

Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.

I did the hci_ldisc thing as an evil merge, cleaning things up.

1 files changed, 40 insertions, 4 deletions

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 6611535f4440..b40f7b90c81d 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/char/8250.c
- *
  *  Driver for 8250/16550-type serial ports
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
@@ -273,7 +271,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 32,
 		.tx_loadsz	= 32,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO | UART_CAP_UUE,
+		.flags		= UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
 	},
 	[PORT_RM9000] = {
 		.name		= "RM9000",
@@ -303,6 +301,14 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
+	[PORT_TEGRA] = {
+		.name		= "Tegra",
+		.fifo_size	= 32,
+		.tx_loadsz	= 8,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+				  UART_FCR_T_TRIG_01,
+		.flags		= UART_CAP_FIFO | UART_CAP_RTOIE,
+	},
 };
 
 #if defined(CONFIG_MIPS_ALCHEMY)
@@ -1427,6 +1433,27 @@ static void serial8250_enable_ms(struct uart_port *port)
 	serial_out(up, UART_IER, up->ier);
 }
 
+/*
+ * Clear the Tegra rx fifo after a break
+ *
+ * FIXME: This needs to become a port specific callback once we have a
+ * framework for this
+ */
+static void clear_rx_fifo(struct uart_8250_port *up)
+{
+	unsigned int status, tmout = 10000;
+	do {
+		status = serial_in(up, UART_LSR);
+		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+			status = serial_in(up, UART_RX);
+		else
+			break;
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (1);
+}
+
 static void
 receive_chars(struct uart_8250_port *up, unsigned int *status)
 {
@@ -1462,6 +1489,13 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
 				lsr &= ~(UART_LSR_FE | UART_LSR_PE);
 				up->port.icount.brk++;
 				/*
+				 * If tegra port then clear the rx fifo to
+				 * accept another break/character.
+				 */
+				if (up->port.type == PORT_TEGRA)
+					clear_rx_fifo(up);
+
+				/*
 				 * We do the SysRQ and SAK checking
 				 * here because otherwise the break
 				 * may get masked by ignore_status_mask
@@ -2405,7 +2439,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			UART_ENABLE_MS(&up->port, termios->c_cflag))
 		up->ier |= UART_IER_MSI;
 	if (up->capabilities & UART_CAP_UUE)
-		up->ier |= UART_IER_UUE | UART_IER_RTOIE;
+		up->ier |= UART_IER_UUE;
+	if (up->capabilities & UART_CAP_RTOIE)
+		up->ier |= UART_IER_RTOIE;
 
 	serial_out(up, UART_IER, up->ier);