Merge tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial fixes from Greg KH:
 "Here are some tty and serial fixes for 3.4-rc2.

  Most important here is the pl011 fix, which has been reported by about
  100 different people, which means more people use it than I expected
  :)

  There are also some 8250 driver reverts due to some problems reported
  by them.  And other minor fixes as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Add Kontron COMe-mTT10 uart clock quirk
  pch_uart: Fix MSI setting issue
  serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port
  Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"
  Revert "serial/8250_pci: init-quirk msi support for kt serial controller"
  tty/serial/omap: console can only be built-in
  serial: samsung: fix omission initialize ulcon in reset port fn()
  printk(): add KERN_CONT where needed in hpet and vt code
  tty/serial: atmel_serial: fix RS485 half-duplex problem
  tty: serial: altera_uart: Check for NULL platform_data in probe.
  isdn/gigaset: use gig_dbg() for debugging output
  omap-serial: Fix the error handling in the omap_serial probe
  serial: PL011: move interrupt clearing

1 files changed, 20 insertions, 23 deletions

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0121486ac4fa..d00b38eb268e 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(mem->start, resource_size(mem),
+	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
 				pdev->dev.driver->name)) {
 		dev_err(&pdev->dev, "memory region already claimed\n");
 		return -EBUSY;
 	}
 
 	dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
-	if (!dma_rx) {
-		ret = -EINVAL;
-		goto err;
-	}
+	if (!dma_rx)
+		return -ENXIO;
 
 	dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
-	if (!dma_tx) {
-		ret = -EINVAL;
-		goto err;
-	}
+	if (!dma_tx)
+		return -ENXIO;
+
+	up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
+	if (!up)
+		return -ENOMEM;
 
-	up = kzalloc(sizeof(*up), GFP_KERNEL);
-	if (up == NULL) {
-		ret = -ENOMEM;
-		goto do_release_region;
-	}
 	up->pdev = pdev;
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
@@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
 								up->port.line);
 		ret = -ENODEV;
-		goto err;
+		goto err_port_line;
 	}
 
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
-	up->port.membase = ioremap(mem->start, resource_size(mem));
+	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
+						resource_size(mem));
 	if (!up->port.membase) {
 		dev_err(&pdev->dev, "can't ioremap UART\n");
 		ret = -ENOMEM;
-		goto err;
+		goto err_ioremap;
 	}
 
 	up->port.flags = omap_up_info->flags;
@@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev)
 
 	ret = uart_add_one_port(&serial_omap_reg, &up->port);
 	if (ret != 0)
-		goto do_release_region;
+		goto err_add_port;
 
 	pm_runtime_put(&pdev->dev);
 	platform_set_drvdata(pdev, up);
 	return 0;
-err:
+
+err_add_port:
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+err_ioremap:
+err_port_line:
 	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
 				pdev->id, __func__, ret);
-do_release_region:
-	release_mem_region(mem->start, resource_size(mem));
 	return ret;
 }
 
@@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev)
 		pm_runtime_disable(&up->pdev->dev);
 		uart_remove_one_port(&serial_omap_reg, &up->port);
 		pm_qos_remove_request(&up->pm_qos_request);
-
-		kfree(up);
 	}
 
 	platform_set_drvdata(dev, NULL);