diff options
| author | Richard Genoud <richard.genoud@gmail.com> | 2016-12-06 13:05:33 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-19 20:18:03 +0100 |
| commit | 2d789bd1fc24788116ee0711208ef439a8db7ba5 (patch) | |
| tree | 987b9d77998ec11eb42bea5ddfae9681a45872b5 /drivers/tty/serial | |
| parent | 199c89fd32b2a127f12d5614a701e275f7f5a10f (diff) | |
tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
commit b389f173aaa1204d6dc1f299082a162eb0491545 upstream.
When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.
Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.
But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.
This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.
Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
Reported-by: Gil Weber <webergil@gmail.com>
Fixes: 0058f0871efe7b01c6
Tested-by: Gil Weber <webergil@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 11 |
1 files changed, 5 insertions, 6 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 168b10cad47b..11c0117af80b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -798,6 +798,11 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + else if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } spin_unlock_irqrestore(&port->lock, flags); } @@ -900,12 +905,6 @@ static void atmel_tx_dma(struct uart_port *port) desc->callback = atmel_complete_tx_dma; desc->callback_param = atmel_port; atmel_port->cookie_tx = dmaengine_submit(desc); - - } else { - if (port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |