diff options
| author | Dirk Behme <dirk.behme@de.bosch.com> | 2012-08-31 10:02:47 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-06-07 16:02:08 -0700 |
| commit | d981d3fc5bf7923c1b9bf46016c4a6e83ee843b9 (patch) | |
| tree | fe2ae830b4dbec0b2be0ac6a63cea3b3d2572bfb /drivers/tty/serial | |
| parent | ffb88d59ca6ddb54e4ed24155b8f9a77bf200680 (diff) | |
tty: serial: imx: don't reinit clock in imx_setup_ufcr()
commit 7be0670f7b9198382938a03ff3db7f47ef6b4780 upstream.
Remove the clock configuration from imx_setup_ufcr(). This
isn't needed here and will cause garbage output if done.
To be be sure that we only touch the bits we want (TXTL and RXTL)
we have to mask out all other bits of the UFCR register. Add
one non-existing bit macro for this, too (bit 6, DCEDTE on i.MX6).
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Shawn Guo <shawn.guo@linaro.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Xinyu Chen <xinyu.chen@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: deleted code in imx_setup_ufcr() refers to
sport->clk not sport->clk_per]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/imx.c | 18 |
1 files changed, 4 insertions, 14 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 0de7ed788631..88620e1ad5fc 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -131,6 +131,7 @@ #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ @@ -666,22 +667,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state) static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) { unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); + /* set receiver / transmitter trigger level */ + val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= TXTL << UFCR_TXTL_SHF | RXTL; writel(val, sport->port.membase + UFCR); - return 0; } |