summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-05-06 23:38:00 +0200
committerArnd Bergmann <arnd@arndb.de>2013-05-06 23:38:00 +0200
commit4183bef2e093a2f0aab45f2d5fed82b0e02aeacf (patch)
treee84c484db3746a0f3ead0fb7a2bb9e5a42b89e85 /drivers/tty
parent662478d060a39b8faf2b1fe2fbbb212556c2e052 (diff)
parent775c4f66fd855e68a98fc5049003810fe98e2e20 (diff)
Merge branch 'late/dt' into next/dt2
This is support for the ARM Chromebook, originally scheduled as a "late" pull request. Since it's already late now, we can combine this into the existing next/dt2 branch. * late/dt: ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/mxser.c8
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c12
-rw-r--r--drivers/tty/serial/omap-serial.c11
3 files changed, 20 insertions, 11 deletions
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3c9b03..302909ccf183 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev,
mxvar_sdriver, brd->idx + i, &pdev->dev);
if (IS_ERR(tty_dev)) {
retval = PTR_ERR(tty_dev);
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
goto err_relbrd;
}
}
@@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void)
tty_dev = tty_port_register_device(&brd->ports[i].port,
mxvar_sdriver, brd->idx + i, NULL);
if (IS_ERR(tty_dev)) {
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
for (i = 0; i < brd->info->nports; i++)
tty_port_destroy(&brd->ports[i].port);
free_irq(brd->irq, brd);
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index b3455a970a1d..35d9ab95c5cb 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
- struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
- res = pnp_get_resource(dev, IORESOURCE_IO, 2);
- else if (pnp_port_valid(dev, 0))
- res = pnp_get_resource(dev, IORESOURCE_IO, 0);
- if (pnp_resource_enabled(res)) {
- uart.port.iobase = res->start;
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+ uart.port.iobase = pnp_port_start(dev, 2);
+ uart.port.iotype = UPIO_PORT;
+ } else if (pnp_port_valid(dev, 0)) {
+ uart.port.iobase = pnp_port_start(dev, 0);
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 4dc41408ecb7..30d4f7a783cd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
/* FIFO ENABLE, DMA MODE */
+ up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
+ /*
+ * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK
+ * sets Enables the granularity of 1 for TRIGGER RX
+ * level. Along with setting RX FIFO trigger level
+ * to 1 (as noted below, 16 characters) and TLR[3:0]
+ * to zero this will result RX FIFO threshold level
+ * to 1 character, instead of 16 as noted in comment
+ * below.
+ */
+
/* Set receive FIFO threshold to 16 characters and
* transmit FIFO threshold to 16 spaces
*/