summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorAlexander Shiyan <shc_work@mail.ru>2013-12-31 20:49:42 +0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-07 17:06:18 -0800
commit093a9e2a20ebc414f8ca0d31709dab1040fa2886 (patch)
tree8403b0108980e2e14d01fdf08b76d99e7008c685 /drivers/tty
parent71b9e8c6694f5cfe6cd37d53d6c24a33f1f59abd (diff)
serial: clps711x: Enable driver compilation with COMPILE_TEST
This helps increasing build testing coverage. To do this, read{write}_relaxed() functions was be replaced with simple read{write}() variants. Potential "uninitialized variable" warnings was be fixed if driver compiled without MFD_SYSCON. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/Kconfig3
-rw-r--r--drivers/tty/serial/clps711x.c40
2 files changed, 23 insertions, 20 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 7fbbbadea2dd..441ada489874 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -181,9 +181,8 @@ config SERIAL_KS8695_CONSOLE
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
- depends on ARCH_CLPS711X
+ depends on ARCH_CLPS711X || COMPILE_TEST
select SERIAL_CORE
- default y
help
This enables the driver for the on-chip UARTs of the Cirrus
Logic EP711x/EP721x/EP731x processors.
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 5a931f97aa7c..b0eacb83f831 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -99,15 +99,16 @@ static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
struct uart_port *port = dev_id;
struct clps711x_port *s = dev_get_drvdata(port->dev);
unsigned int status, flg;
- u32 sysflg;
u16 ch;
for (;;) {
+ u32 sysflg = 0;
+
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
if (sysflg & SYSFLG_URXFE)
break;
- ch = readw_relaxed(port->membase + UARTDR_OFFSET);
+ ch = readw(port->membase + UARTDR_OFFSET);
status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
ch &= 0xff;
@@ -151,10 +152,9 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
struct uart_port *port = dev_id;
struct clps711x_port *s = dev_get_drvdata(port->dev);
struct circ_buf *xmit = &port->state->xmit;
- u32 sysflg;
if (port->x_char) {
- writew_relaxed(port->x_char, port->membase + UARTDR_OFFSET);
+ writew(port->x_char, port->membase + UARTDR_OFFSET);
port->icount.tx++;
port->x_char = 0;
return IRQ_HANDLED;
@@ -169,8 +169,9 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
}
while (!uart_circ_empty(xmit)) {
- writew_relaxed(xmit->buf[xmit->tail],
- port->membase + UARTDR_OFFSET);
+ u32 sysflg = 0;
+
+ writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
@@ -188,7 +189,7 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- u32 sysflg;
+ u32 sysflg = 0;
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
@@ -199,9 +200,10 @@ static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
unsigned int result = 0;
- u32 sysflg;
if (s->use_ms) {
+ u32 sysflg = 0;
+
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
if (sysflg & SYSFLG1_DCD)
result |= TIOCM_CAR;
@@ -224,12 +226,12 @@ static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
{
unsigned int ubrlcr;
- ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET);
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
if (break_state)
ubrlcr |= UBRLCR_BREAK;
else
ubrlcr &= ~UBRLCR_BREAK;
- writel_relaxed(ubrlcr, port->membase + UBRLCR_OFFSET);
+ writel(ubrlcr, port->membase + UBRLCR_OFFSET);
}
static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
@@ -247,8 +249,8 @@ static int uart_clps711x_startup(struct uart_port *port)
struct clps711x_port *s = dev_get_drvdata(port->dev);
/* Disable break */
- writel_relaxed(readl_relaxed(port->membase + UBRLCR_OFFSET) &
- ~UBRLCR_BREAK, port->membase + UBRLCR_OFFSET);
+ writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
+ port->membase + UBRLCR_OFFSET);
/* Enable the port */
return regmap_update_bits(s->syscon, SYSCON_OFFSET,
@@ -320,7 +322,7 @@ static void uart_clps711x_set_termios(struct uart_port *port,
uart_update_timeout(port, termios->c_cflag, baud);
- writel_relaxed(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
+ writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
}
static const char *uart_clps711x_type(struct uart_port *port)
@@ -366,13 +368,13 @@ static const struct uart_ops uart_clps711x_ops = {
static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- u32 sysflg;
+ u32 sysflg = 0;
do {
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
} while (sysflg & SYSFLG_UTXFF);
- writew_relaxed(ch, port->membase + UARTDR_OFFSET);
+ writew(ch, port->membase + UARTDR_OFFSET);
}
static void uart_clps711x_console_write(struct console *co, const char *c,
@@ -380,7 +382,7 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
{
struct uart_port *port = clps711x_uart.state[co->index].uart_port;
struct clps711x_port *s = dev_get_drvdata(port->dev);
- u32 sysflg;
+ u32 sysflg = 0;
uart_console_write(port, c, n, uart_clps711x_console_putchar);
@@ -396,8 +398,8 @@ static int uart_clps711x_console_setup(struct console *co, char *options)
int ret, index = co->index;
struct clps711x_port *s;
struct uart_port *port;
- u32 ubrlcr, syscon;
unsigned int quot;
+ u32 ubrlcr;
if (index < 0 || index >= UART_CLPS711X_NR)
return -EINVAL;
@@ -409,9 +411,11 @@ static int uart_clps711x_console_setup(struct console *co, char *options)
s = dev_get_drvdata(port->dev);
if (!options) {
+ u32 syscon = 0;
+
regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
if (syscon & SYSCON_UARTEN) {
- ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET);
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
if (ubrlcr & UBRLCR_PRTEN) {
if (ubrlcr & UBRLCR_EVENPRT)