summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:59 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:39:59 -0800
commitb3c37522928b5452588fc202eaa0f11f6e339256 (patch)
tree37bfe21d9977b15271903d1a4b304289a232e364 /drivers/tty
parent2ac9d7aaccbd598b5bd19ac40761b723bb675442 (diff)
parent6d0a5636fba5a3f82ec80ab124dd4748344549c3 (diff)
Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
power management changes for omap and imx A significant part of the changes for these two platforms went into power management, so they are split out into a separate branch. * tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1 ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation ARM: imx6q: resume PL310 only when CACHE_L2X0 defined ARM: imx6q: build pm code only when CONFIG_PM selected ARM: mx5: use generic irq chip pm interface for pm functions on ARM: omap: pass minimal SoC/board data for UART from dt arm/dts: Add minimal device tree support for omap2420 and omap2430 omap-serial: Add minimal device tree support omap-serial: Use default clock speed (48Mhz) if not specified omap-serial: Get rid of all pdev->id usage ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init ARM: OMAP4: PRM: use PRCM interrupt handler ARM: OMAP3: pm: use prcm chain handler ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad ARM: OMAP2+: mux: add support for PAD wakeup interrupts ARM: OMAP: PRCM: add suspend prepare / finish support ARM: OMAP: PRCM: add support for chain interrupt handler ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list ...
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/omap-serial.c428
1 files changed, 367 insertions, 61 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index f2a1380ed678..d192dcbb82f5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -37,17 +37,24 @@
#include <linux/clk.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <plat/omap-serial.h>
+#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
+
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
-static void serial_omap_rx_timeout(unsigned long uart_no);
+static void serial_omap_rxdma_poll(unsigned long uart_no);
static int serial_omap_start_rxdma(struct uart_omap_port *up);
+static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
+
+static struct workqueue_struct *serial_omap_uart_wq;
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
{
@@ -102,6 +109,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up)
omap_free_dma(up->uart_dma.rx_dma_channel);
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
up->uart_dma.rx_dma_used = false;
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
}
}
@@ -109,9 +118,12 @@ static void serial_omap_enable_ms(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
- dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
+
+ pm_runtime_get_sync(&up->pdev->dev);
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
+ pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_stop_tx(struct uart_port *port)
@@ -129,30 +141,40 @@ static void serial_omap_stop_tx(struct uart_port *port)
omap_stop_dma(up->uart_dma.tx_dma_channel);
omap_free_dma(up->uart_dma.tx_dma_channel);
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
}
+ pm_runtime_get_sync(&up->pdev->dev);
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
+
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
}
static void serial_omap_stop_rx(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+ pm_runtime_get_sync(&up->pdev->dev);
if (up->use_dma)
serial_omap_stop_rxdma(up);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
}
-static inline void receive_chars(struct uart_omap_port *up, int *status)
+static inline void receive_chars(struct uart_omap_port *up,
+ unsigned int *status)
{
struct tty_struct *tty = up->port.state->port.tty;
- unsigned int flag;
- unsigned char ch, lsr = *status;
+ unsigned int flag, lsr = *status;
+ unsigned char ch = 0;
int max_count = 256;
do {
@@ -262,7 +284,10 @@ static void serial_omap_start_tx(struct uart_port *port)
int ret = 0;
if (!up->use_dma) {
+ pm_runtime_get_sync(&up->pdev->dev);
serial_omap_enable_ier_thri(up);
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
return;
}
@@ -272,6 +297,7 @@ static void serial_omap_start_tx(struct uart_port *port)
xmit = &up->port.state->xmit;
if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
+ pm_runtime_get_sync(&up->pdev->dev);
ret = omap_request_dma(up->uart_dma.uart_dma_tx,
"UART Tx DMA",
(void *)uart_tx_dma_callback, up,
@@ -354,9 +380,13 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
unsigned int iir, lsr;
unsigned long flags;
+ pm_runtime_get_sync(&up->pdev->dev);
iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT)
+ if (iir & UART_IIR_NO_INT) {
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
return IRQ_NONE;
+ }
spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
@@ -378,6 +408,9 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
+
up->port_activity = jiffies;
return IRQ_HANDLED;
}
@@ -388,11 +421,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
unsigned long flags = 0;
unsigned int ret = 0;
- dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
+ pm_runtime_get_sync(&up->pdev->dev);
+ dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
-
+ pm_runtime_put(&up->pdev->dev);
return ret;
}
@@ -402,8 +436,11 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
unsigned int status;
unsigned int ret = 0;
+ pm_runtime_get_sync(&up->pdev->dev);
status = check_modem_status(up);
- dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
+ pm_runtime_put(&up->pdev->dev);
+
+ dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
if (status & UART_MSR_DCD)
ret |= TIOCM_CAR;
@@ -421,7 +458,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
struct uart_omap_port *up = (struct uart_omap_port *)port;
unsigned char mcr = 0;
- dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
if (mctrl & TIOCM_RTS)
mcr |= UART_MCR_RTS;
if (mctrl & TIOCM_DTR)
@@ -433,8 +470,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
- mcr |= up->mcr;
- serial_out(up, UART_MCR, mcr);
+ pm_runtime_get_sync(&up->pdev->dev);
+ up->mcr = serial_in(up, UART_MCR);
+ up->mcr |= mcr;
+ serial_out(up, UART_MCR, up->mcr);
+ pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -442,7 +482,8 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
struct uart_omap_port *up = (struct uart_omap_port *)port;
unsigned long flags = 0;
- dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
+ pm_runtime_get_sync(&up->pdev->dev);
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
@@ -450,6 +491,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
+ pm_runtime_put(&up->pdev->dev);
}
static int serial_omap_startup(struct uart_port *port)
@@ -466,8 +508,9 @@ static int serial_omap_startup(struct uart_port *port)
if (retval)
return retval;
- dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
+ pm_runtime_get_sync(&up->pdev->dev);
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
@@ -505,8 +548,8 @@ static int serial_omap_startup(struct uart_port *port)
(dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
0);
init_timer(&(up->uart_dma.rx_timer));
- up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
- up->uart_dma.rx_timer.data = up->pdev->id;
+ up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
+ up->uart_dma.rx_timer.data = up->port.line;
/* Currently the buffer size is 4KB. Can increase it */
up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
up->uart_dma.rx_buf_size,
@@ -523,6 +566,8 @@ static int serial_omap_startup(struct uart_port *port)
/* Enable module level wake up */
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
up->port_activity = jiffies;
return 0;
}
@@ -532,7 +577,9 @@ static void serial_omap_shutdown(struct uart_port *port)
struct uart_omap_port *up = (struct uart_omap_port *)port;
unsigned long flags = 0;
- dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
+
+ pm_runtime_get_sync(&up->pdev->dev);
/*
* Disable interrupts from this port
*/
@@ -566,6 +613,8 @@ static void serial_omap_shutdown(struct uart_port *port)
up->uart_dma.rx_buf_dma_phys);
up->uart_dma.rx_buf = NULL;
}
+
+ pm_runtime_put(&up->pdev->dev);
free_irq(up->port.irq, up);
}
@@ -573,8 +622,6 @@ static inline void
serial_omap_configure_xonxoff
(struct uart_omap_port *up, struct ktermios *termios)
{
- unsigned char efr = 0;
-
up->lcr = serial_in(up, UART_LCR);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
up->efr = serial_in(up, UART_EFR);
@@ -584,8 +631,7 @@ serial_omap_configure_xonxoff
serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
/* clear SW control mode bits */
- efr = up->efr;
- efr &= OMAP_UART_SW_CLR;
+ up->efr &= OMAP_UART_SW_CLR;
/*
* IXON Flag:
@@ -593,7 +639,7 @@ serial_omap_configure_xonxoff
* Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXON)
- efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_TX;
/*
* IXOFF Flag:
@@ -601,7 +647,7 @@ serial_omap_configure_xonxoff
* Receiver compares XON1, XOFF1.
*/
if (termios->c_iflag & IXOFF)
- efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_RX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
@@ -624,13 +670,21 @@ serial_omap_configure_xonxoff
* load the new software flow control mode IXON or IXOFF
* and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
*/
- serial_out(up, UART_EFR, efr | UART_EFR_SCD);
+ serial_out(up, UART_EFR, up->efr | UART_EFR_SCD);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
serial_out(up, UART_LCR, up->lcr);
}
+static void serial_omap_uart_qos_work(struct work_struct *work)
+{
+ struct uart_omap_port *up = container_of(work, struct uart_omap_port,
+ qos_work);
+
+ pm_qos_update_request(&up->pm_qos_request, up->latency);
+}
+
static void
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -671,6 +725,16 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
quot = serial_omap_get_divisor(port, baud);
+ /* calculate wakeup latency constraint */
+ up->calc_latency = (1000000 * up->port.fifosize) /
+ (1000 * baud / 8);
+ up->latency = up->calc_latency;
+ schedule_work(&up->qos_work);
+
+ up->dll = quot & 0xff;
+ up->dlh = quot >> 8;
+ up->mdr1 = UART_OMAP_MDR1_DISABLE;
+
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
UART_FCR_ENABLE_FIFO;
if (up->use_dma)
@@ -680,6 +744,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
+ pm_runtime_get_sync(&up->pdev->dev);
spin_lock_irqsave(&up->port.lock, flags);
/*
@@ -723,6 +788,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval;
+ up->scr = OMAP_UART_SCR_TX_EMPTY;
/* FIFOs and DMA Settings */
@@ -749,17 +816,22 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->use_dma) {
serial_out(up, UART_TI752_TLR, 0);
- serial_out(up, UART_OMAP_SCR,
- (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
+ up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8);
}
+ serial_out(up, UART_OMAP_SCR, up->scr);
+
serial_out(up, UART_EFR, up->efr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr);
/* Protocol, Baud Rate, and Interrupt Settings */
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+ if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
+ serial_omap_mdr1_errataset(up, up->mdr1);
+ else
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
+
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
up->efr = serial_in(up, UART_EFR);
@@ -769,8 +841,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_IER, 0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
- serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_DLL, up->dll); /* LS of divisor */
+ serial_out(up, UART_DLM, up->dlh); /* MS of divisor */
serial_out(up, UART_LCR, 0);
serial_out(up, UART_IER, up->ier);
@@ -780,9 +852,14 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_LCR, cval);
if (baud > 230400 && baud != 3000000)
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
+ up->mdr1 = UART_OMAP_MDR1_13X_MODE;
else
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
+ up->mdr1 = UART_OMAP_MDR1_16X_MODE;
+
+ if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
+ serial_omap_mdr1_errataset(up, up->mdr1);
+ else
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
/* Hardware Flow Control Configuration */
@@ -809,7 +886,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
- dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
+ pm_runtime_put(&up->pdev->dev);
+ dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
}
static void
@@ -819,7 +897,9 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
struct uart_omap_port *up = (struct uart_omap_port *)port;
unsigned char efr;
- dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
+
+ pm_runtime_get_sync(&up->pdev->dev);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -829,6 +909,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
+
+ if (!device_may_wakeup(&up->pdev->dev)) {
+ if (!state)
+ pm_runtime_forbid(&up->pdev->dev);
+ else
+ pm_runtime_allow(&up->pdev->dev);
+ }
+
+ pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_release_port(struct uart_port *port)
@@ -847,7 +936,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags)
struct uart_omap_port *up = (struct uart_omap_port *)port;
dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
- up->pdev->id);
+ up->port.line);
up->port.type = PORT_OMAP;
}
@@ -864,7 +953,7 @@ serial_omap_type(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
- dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id);
+ dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line);
return up->name;
}
@@ -906,19 +995,26 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ pm_runtime_get_sync(&up->pdev->dev);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
+ pm_runtime_put(&up->pdev->dev);
}
static int serial_omap_poll_get_char(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
- unsigned int status = serial_in(up, UART_LSR);
+ unsigned int status;
+ pm_runtime_get_sync(&up->pdev->dev);
+ status = serial_in(up, UART_LSR);
if (!(status & UART_LSR_DR))
return NO_POLL_CHAR;
- return serial_in(up, UART_RX);
+ status = serial_in(up, UART_RX);
+ pm_runtime_put(&up->pdev->dev);
+ return status;
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -946,6 +1042,8 @@ serial_omap_console_write(struct console *co, const char *s,
unsigned int ier;
int locked = 1;
+ pm_runtime_get_sync(&up->pdev->dev);
+
local_irq_save(flags);
if (up->port.sysrq)
locked = 0;
@@ -978,6 +1076,8 @@ serial_omap_console_write(struct console *co, const char *s,
if (up->msr_saved_flags)
check_modem_status(up);
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
@@ -1014,7 +1114,7 @@ static struct console serial_omap_console = {
static void serial_omap_add_console_port(struct uart_omap_port *up)
{
- serial_omap_console_ports[up->pdev->id] = up;
+ serial_omap_console_ports[up->port.line] = up;
}
#define OMAP_CONSOLE (&serial_omap_console)
@@ -1060,26 +1160,30 @@ static struct uart_driver serial_omap_reg = {
.cons = OMAP_CONSOLE,
};
-static int
-serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_SUSPEND
+static int serial_omap_suspend(struct device *dev)
{
- struct uart_omap_port *up = platform_get_drvdata(pdev);
+ struct uart_omap_port *up = dev_get_drvdata(dev);
- if (up)
+ if (up) {
uart_suspend_port(&serial_omap_reg, &up->port);
+ flush_work_sync(&up->qos_work);
+ }
+
return 0;
}
-static int serial_omap_resume(struct platform_device *dev)
+static int serial_omap_resume(struct device *dev)
{
- struct uart_omap_port *up = platform_get_drvdata(dev);
+ struct uart_omap_port *up = dev_get_drvdata(dev);
if (up)
uart_resume_port(&serial_omap_reg, &up->port);
return 0;
}
+#endif
-static void serial_omap_rx_timeout(unsigned long uart_no)
+static void serial_omap_rxdma_poll(unsigned long uart_no)
{
struct uart_omap_port *up = ui[uart_no];
unsigned int curr_dma_pos, curr_transmitted_size;
@@ -1089,9 +1193,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
(curr_dma_pos == 0)) {
if (jiffies_to_msecs(jiffies - up->port_activity) <
- RX_TIMEOUT) {
+ up->uart_dma.rx_timeout) {
mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_timeout));
+ usecs_to_jiffies(up->uart_dma.rx_poll_rate));
} else {
serial_omap_stop_rxdma(up);
up->ier |= (UART_IER_RDI | UART_IER_RLSI);
@@ -1120,7 +1224,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
}
} else {
mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_timeout));
+ usecs_to_jiffies(up->uart_dma.rx_poll_rate));
}
up->port_activity = jiffies;
}
@@ -1135,6 +1239,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
int ret = 0;
if (up->uart_dma.rx_dma_channel == -1) {
+ pm_runtime_get_sync(&up->pdev->dev);
ret = omap_request_dma(up->uart_dma.uart_dma_rx,
"UART Rx DMA",
(void *)uart_rx_dma_callback, up,
@@ -1158,7 +1263,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
/* FIXME: Cache maintenance needed here? */
omap_start_dma(up->uart_dma.rx_dma_channel);
mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_timeout));
+ usecs_to_jiffies(up->uart_dma.rx_poll_rate));
up->uart_dma.rx_dma_used = true;
return ret;
}
@@ -1221,6 +1326,19 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
return;
}
+static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+{
+ struct omap_uart_port_info *omap_up_info;
+
+ omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL);
+ if (!omap_up_info)
+ return NULL; /* out of memory */
+
+ of_property_read_u32(dev->of_node, "clock-frequency",
+ &omap_up_info->uartclk);
+ return omap_up_info;
+}
+
static int serial_omap_probe(struct platform_device *pdev)
{
struct uart_omap_port *up;
@@ -1228,6 +1346,9 @@ static int serial_omap_probe(struct platform_device *pdev)
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
int ret = -ENOSPC;
+ if (pdev->dev.of_node)
+ omap_up_info = of_get_uart_port_info(&pdev->dev);
+
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "no mem resource?\n");
@@ -1263,7 +1384,6 @@ static int serial_omap_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto do_release_region;
}
- sprintf(up->name, "OMAP UART%d", pdev->id);
up->pdev = pdev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
@@ -1273,34 +1393,74 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.regshift = 2;
up->port.fifosize = 64;
up->port.ops = &serial_omap_pops;
- up->port.line = pdev->id;
- up->port.membase = omap_up_info->membase;
- up->port.mapbase = omap_up_info->mapbase;
+ if (pdev->dev.of_node)
+ up->port.line = of_alias_get_id(pdev->dev.of_node, "serial");
+ else
+ up->port.line = pdev->id;
+
+ if (up->port.line < 0) {
+ dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
+ up->port.line);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ sprintf(up->name, "OMAP UART%d", up->port.line);
+ up->port.mapbase = mem->start;
+ up->port.membase = ioremap(mem->start, resource_size(mem));
+ if (!up->port.membase) {
+ dev_err(&pdev->dev, "can't ioremap UART\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
up->port.flags = omap_up_info->flags;
- up->port.irqflags = omap_up_info->irqflags;
up->port.uartclk = omap_up_info->uartclk;
+ if (!up->port.uartclk) {
+ up->port.uartclk = DEFAULT_CLK_SPEED;
+ dev_warn(&pdev->dev, "No clock speed specified: using default:"
+ "%d\n", DEFAULT_CLK_SPEED);
+ }
up->uart_dma.uart_base = mem->start;
+ up->errata = omap_up_info->errata;
if (omap_up_info->dma_enabled) {
up->uart_dma.uart_dma_tx = dma_tx->start;
up->uart_dma.uart_dma_rx = dma_rx->start;
up->use_dma = 1;
- up->uart_dma.rx_buf_size = 4096;
- up->uart_dma.rx_timeout = 2;
+ up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
+ up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
+ up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
spin_lock_init(&(up->uart_dma.tx_lock));
spin_lock_init(&(up->uart_dma.rx_lock));
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
- ui[pdev->id] = up;
+ up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ pm_qos_add_request(&up->pm_qos_request,
+ PM_QOS_CPU_DMA_LATENCY, up->latency);
+ serial_omap_uart_wq = create_singlethread_workqueue(up->name);
+ INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
+
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ omap_up_info->autosuspend_timeout);
+
+ pm_runtime_irq_safe(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ ui[up->port.line] = up;
serial_omap_add_console_port(up);
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
goto do_release_region;
+ pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, up);
return 0;
err:
@@ -1315,22 +1475,168 @@ static int serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
- platform_set_drvdata(dev, NULL);
if (up) {
+ pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
+ pm_qos_remove_request(&up->pm_qos_request);
+
kfree(up);
}
+
+ platform_set_drvdata(dev, NULL);
+ return 0;
+}
+
+/*
+ * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
+ * The access to uart register after MDR1 Access
+ * causes UART to corrupt data.
+ *
+ * Need a delay =
+ * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS)
+ * give 10 times as much
+ */
+static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
+{
+ u8 timeout = 255;
+
+ serial_out(up, UART_OMAP_MDR1, mdr1);
+ udelay(2);
+ serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
+ UART_FCR_CLEAR_RCVR);
+ /*
+ * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
+ * TX_FIFO_E bit is 1.
+ */
+ while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
+ (UART_LSR_THRE | UART_LSR_DR))) {
+ timeout--;
+ if (!timeout) {
+ /* Should *never* happen. we warn and carry on */
+ dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+ serial_in(up, UART_LSR));
+ break;
+ }
+ udelay(1);
+ }
+}
+
+static void serial_omap_restore_context(struct uart_omap_port *up)
+{
+ if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
+ serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE);
+ else
+ serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x0); /* Operational mode */
+ serial_out(up, UART_IER, 0x0);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
+ serial_out(up, UART_DLL, up->dll);
+ serial_out(up, UART_DLM, up->dlh);
+ serial_out(up, UART_LCR, 0x0); /* Operational mode */
+ serial_out(up, UART_IER, up->ier);
+ serial_out(up, UART_FCR, up->fcr);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_out(up, UART_MCR, up->mcr);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
+ serial_out(up, UART_OMAP_SCR, up->scr);
+ serial_out(up, UART_EFR, up->efr);
+ serial_out(up, UART_LCR, up->lcr);
+ if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
+ serial_omap_mdr1_errataset(up, up->mdr1);
+ else
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int serial_omap_runtime_suspend(struct device *dev)
+{
+ struct uart_omap_port *up = dev_get_drvdata(dev);
+ struct omap_uart_port_info *pdata = dev->platform_data;
+
+ if (!up)
+ return -EINVAL;
+
+ if (!pdata || !pdata->enable_wakeup)
+ return 0;
+
+ if (pdata->get_context_loss_count)
+ up->context_loss_cnt = pdata->get_context_loss_count(dev);
+
+ if (device_may_wakeup(dev)) {
+ if (!up->wakeups_enabled) {
+ pdata->enable_wakeup(up->pdev, true);
+ up->wakeups_enabled = true;
+ }
+ } else {
+ if (up->wakeups_enabled) {
+ pdata->enable_wakeup(up->pdev, false);
+ up->wakeups_enabled = false;
+ }
+ }
+
+ /* Errata i291 */
+ if (up->use_dma && pdata->set_forceidle &&
+ (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
+ pdata->set_forceidle(up->pdev);
+
+ up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
+ schedule_work(&up->qos_work);
+
+ return 0;
+}
+
+static int serial_omap_runtime_resume(struct device *dev)
+{
+ struct uart_omap_port *up = dev_get_drvdata(dev);
+ struct omap_uart_port_info *pdata = dev->platform_data;
+
+ if (up) {
+ if (pdata->get_context_loss_count) {
+ u32 loss_cnt = pdata->get_context_loss_count(dev);
+
+ if (up->context_loss_cnt != loss_cnt)
+ serial_omap_restore_context(up);
+ }
+
+ /* Errata i291 */
+ if (up->use_dma && pdata->set_noidle &&
+ (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
+ pdata->set_noidle(up->pdev);
+
+ up->latency = up->calc_latency;
+ schedule_work(&up->qos_work);
+ }
+
return 0;
}
+#endif
+
+static const struct dev_pm_ops serial_omap_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume)
+ SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend,
+ serial_omap_runtime_resume, NULL)
+};
+
+#if defined(CONFIG_OF)
+static const struct of_device_id omap_serial_of_match[] = {
+ { .compatible = "ti,omap2-uart" },
+ { .compatible = "ti,omap3-uart" },
+ { .compatible = "ti,omap4-uart" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_serial_of_match);
+#endif
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
.remove = serial_omap_remove,
-
- .suspend = serial_omap_suspend,
- .resume = serial_omap_resume,
.driver = {
.name = DRIVER_NAME,
+ .pm = &serial_omap_dev_pm_ops,
+ .of_match_table = of_match_ptr(omap_serial_of_match),
},
};