Merge 3.6-rc6 into tty-next

This pulls in the fixes in 3.6-rc6

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 15 insertions, 15 deletions

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 72ec56e6d42f..5952b25c288e 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -132,6 +132,7 @@
 #define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_DCEDTE	 (1<<6)  /* DCE/DTE mode select */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
 #define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
@@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
 	unsigned int val;
-	unsigned int ufcr_rfdiv;
-
-	/* set receiver / transmitter trigger level.
-	 * RFDIV is set such way to satisfy requested uartclk value
-	 */
-	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
-			/ sport->port.uartclk;
-
-	if(!ufcr_rfdiv)
-		ufcr_rfdiv = 1;
-
-	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
+	/* set receiver / transmitter trigger level */
+	val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+	val |= TXTL << UFCR_TXTL_SHF | RXTL;
 	writel(val, sport->port.membase + UFCR);
-
 	return 0;
 }
 
@@ -754,6 +744,7 @@ static int imx_startup(struct uart_port *port)
 		}
 	}
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	/*
 	 * Finally, clear and enable interrupts
 	 */
@@ -807,7 +798,6 @@ static int imx_startup(struct uart_port *port)
 	/*
 	 * Enable modem status interrupts
 	 */
-	spin_lock_irqsave(&sport->port.lock,flags);
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
@@ -837,10 +827,13 @@ static void imx_shutdown(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
+	unsigned long flags;
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR2);
 	temp &= ~(UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	if (USE_IRDA(sport)) {
 		struct imxuart_platform_data *pdata;
@@ -869,12 +862,14 @@ static void imx_shutdown(struct uart_port *port)
 	 * Disable all interrupts, port and break condition.
 	 */
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
 	if (USE_IRDA(sport))
 		temp &= ~(UCR1_IREN);
 
 	writel(temp, sport->port.membase + UCR1);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 static void
@@ -1217,6 +1212,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 	struct imx_port *sport = imx_ports[co->index];
 	struct imx_port_ucrs old_ucr;
 	unsigned int ucr1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
 
 	/*
 	 *	First, save UCR1/2/3 and then disable interrupts
@@ -1242,6 +1240,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 	while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
 
 	imx_port_ucrs_restore(&sport->port, &old_ucr);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*