TTY: move low_latency to tty_port

One point is to have less places where we actually need tty pointer.
The other is that low_latency is bound to buffer processing and
buffers are now in tty_port. So it makes sense to move low_latency to
tty_port too.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

17 files changed, 25 insertions, 25 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2e670d0c5366..2d1357acbc23 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1099,7 +1099,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 	state->custom_divisor = new_serial.custom_divisor;
 	port->close_delay = new_serial.close_delay * HZ/100;
 	port->closing_wait = new_serial.closing_wait * HZ/100;
-	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 check_and_exit:
 	if (port->flags & ASYNC_INITIALIZED) {
@@ -1528,7 +1528,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	if (serial_paranoia_check(info, tty->name, "rs_open"))
 		return -ENODEV;
 
-	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	retval = startup(tty, info);
 	if (retval) {
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index a3ad5e14cbef..c43da7445432 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -106,7 +106,7 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
 
 	tty->port.tty = linux_tty;
 	linux_tty->driver_data = tty;
-	linux_tty->low_latency = 1;
+	tty->port.low_latency = 1;
 
 	if (tty->tty_type == TTYTYPE_MODEM)
 		ipwireless_ppp_open(tty->network);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 450c4507cb5b..e9cdfdfe06e9 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1264,7 +1264,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
 				(new_serial.flags & ASYNC_FLAGS));
 		port->close_delay = new_serial.close_delay * HZ / 100;
 		port->closing_wait = new_serial.closing_wait * HZ / 100;
-		tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+		port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
 				(new_serial.baud_base != info->baud_base ||
 				new_serial.custom_divisor !=
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 108122f8f3c2..0bb24378a3c0 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -508,7 +508,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
 	if (baud < HW_BUF_SPD_THRESHOLD ||
-	    (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
+	    (pinfo->port.state && pinfo->port.state->port.low_latency))
 		pinfo->rx_fifosize = 1;
 	else
 		pinfo->rx_fifosize = RX_BUF_SIZE;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index c82601d4dc53..52449adc09ac 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3462,7 +3462,7 @@ set_serial_info(struct e100_serial *info,
 	info->type = new_serial.type;
 	info->close_delay = new_serial.close_delay;
 	info->closing_wait = new_serial.closing_wait;
-	info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
 	if (info->flags & ASYNC_INITIALIZED) {
@@ -4106,7 +4106,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	tty->driver_data = info;
 	info->port.tty = tty;
 
-	tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
+	info->port.low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
 
 	/*
 	 * If the port is in the middle of closing, bail out now
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index bfb634ea8145..4bc6e47890b4 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -615,7 +615,7 @@ static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty)
 	tty->driver_data = ifx_dev;
 
 	/* allows flip string push from int context */
-	tty->low_latency = 1;
+	port->low_latency = 1;
 
 	/* set flag to allows data transfer */
 	set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 0f25ce49c7f9..edbdc4e45075 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1000,7 +1000,7 @@ ioc3_change_speed(struct uart_port *the_port,
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	state->port.tty->low_latency = 1;
+	state->port.low_latency = 1;
 
 	if (iflag & IGNPAR)
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index 3b021b03ae56..86f64ed89b45 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1740,7 +1740,7 @@ ioc4_change_speed(struct uart_port *the_port,
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	state->port.tty->low_latency = 1;
+	state->port.low_latency = 1;
 
 	if (iflag & IGNPAR)
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 7ce3197087bb..e238e80cd981 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -530,7 +530,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 			MAX3100_STATUS_OE;
 
 	/* we are sending char from a workqueue so enable */
-	s->port.state->port.tty->low_latency = 1;
+	s->port.state->port.low_latency = 1;
 
 	if (s->poll_time > 0)
 		del_timer_sync(&s->timer);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 4bcbc66c48c4..6f2d2ceb326a 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -970,7 +970,7 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
 #endif
 		/* Following use of tty struct directly is deprecated */
 		if (tty_buffer_request_room(port, bytes_in) < bytes_in) {
-			if (tty->low_latency)
+			if (port->low_latency)
 				tty_flip_buffer_push(tty);
 			/*
 			 * If this failed then we will throw away the bytes
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 3b8df7b93b73..4632db7a24b7 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -495,7 +495,7 @@ static int serial_m3110_startup(struct uart_port *port)
 			| WC_BAUD_DR2;
 
 	/* as we use thread to handle tx/rx, need set low latency */
-	port->state->port.tty->low_latency = 1;
+	port->state->port.low_latency = 1;
 
 	if (max->irq) {
 		max->read_thread = NULL;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 11b7f5b2eb5f..c356ffff3c71 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -1400,7 +1400,7 @@ static int msm_hs_startup(struct uart_port *uport)
 
 	/* do not let tty layer execute RX in global workqueue, use a
 	 * dedicated workqueue managed by this driver */
-	uport->state->port.tty->low_latency = 1;
+	uport->state->port.low_latency = 1;
 
 	/* turn on uart clk */
 	ret = msm_hs_init_clk_locked(uport);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 675343a20f24..b5c4e64f2990 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -867,9 +867,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 	port->closing_wait    = closing_wait;
 	if (new_info->xmit_fifo_size)
 		uport->fifosize = new_info->xmit_fifo_size;
-	if (port->tty)
-		port->tty->low_latency =
-			(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	port->low_latency = (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
 	retval = 0;
@@ -1565,7 +1563,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->driver_data = state;
 	state->uart_port->state = state;
-	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	state->port.low_latency =
+		(state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 	tty_port_tty_set(port, tty);
 
 	/*
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 33656b35db05..2f6967d61a80 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3415,7 +3415,7 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
 		goto cleanup;
 	}
 	
-	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 473d7406db83..9a0358a1e0dd 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -682,7 +682,7 @@ static int open(struct tty_struct *tty, struct file *filp)
 	}
 
 	mutex_lock(&info->port.mutex);
-	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index f5794f3d840f..419f58ff4a13 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -761,7 +761,7 @@ static int open(struct tty_struct *tty, struct file *filp)
 		goto cleanup;
 	}
 
-	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	spin_lock_irqsave(&info->netlock, flags);
 	if (info->netcount) {
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 31873e42602a..1bfe97a8e2eb 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -364,7 +364,7 @@ void tty_schedule_flip(struct tty_struct *tty)
 {
 	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
-	WARN_ON(tty->low_latency);
+	WARN_ON(tty->port->low_latency);
 
 	spin_lock_irqsave(&buf->lock, flags);
 	if (buf->tail != NULL)
@@ -538,7 +538,7 @@ static void flush_to_ldisc(struct work_struct *work)
  */
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
-	if (!tty->low_latency)
+	if (!tty->port->low_latency)
 		flush_work(&tty->port->buf.work);
 }
 
@@ -547,7 +547,8 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
  *	@tty: tty to push
  *
  *	Queue a push of the terminal flip buffers to the line discipline. This
- *	function must not be called from IRQ context if tty->low_latency is set.
+ *	function must not be called from IRQ context if port->low_latency is
+ *	set.
  *
  *	In the event of the queue being busy for flipping the work will be
  *	held off and retried later.
@@ -565,7 +566,7 @@ void tty_flip_buffer_push(struct tty_struct *tty)
 		buf->tail->commit = buf->tail->used;
 	spin_unlock_irqrestore(&buf->lock, flags);
 
-	if (tty->low_latency)
+	if (tty->port->low_latency)
 		flush_to_ldisc(&buf->work);
 	else
 		schedule_work(&buf->work);