Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

1 files changed, 203 insertions, 0 deletions

diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c
new file mode 100644
index 000000000000..c41ddb61b857
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS PCI Glue driver
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct cdns3_wrap {
+	struct platform_device *plat_dev;
+	struct resource dev_res[6];
+	int devfn;
+};
+
+#define RES_IRQ_HOST_ID		0
+#define RES_IRQ_PERIPHERAL_ID	1
+#define RES_IRQ_OTG_ID		2
+#define RES_HOST_ID		3
+#define RES_DEV_ID		4
+#define RES_DRD_ID		5
+
+#define PCI_BAR_HOST		0
+#define PCI_BAR_DEV		2
+#define PCI_BAR_OTG		0
+
+#define PCI_DEV_FN_HOST_DEVICE	0
+#define PCI_DEV_FN_OTG		1
+
+#define PCI_DRIVER_NAME		"cdns3-pci-usbss"
+#define PLAT_DRIVER_NAME	"cdns-usb3"
+
+#define CDNS_VENDOR_ID		0x17cd
+#define CDNS_DEVICE_ID		0x0100
+
+static struct pci_dev *cdns3_get_second_fun(struct pci_dev *pdev)
+{
+	struct pci_dev *func;
+
+	/*
+	 * Gets the second function.
+	 * It's little tricky, but this platform has two function.
+	 * The fist keeps resources for Host/Device while the second
+	 * keeps resources for DRD/OTG.
+	 */
+	func = pci_get_device(pdev->vendor, pdev->device, NULL);
+	if (unlikely(!func))
+		return NULL;
+
+	if (func->devfn == pdev->devfn) {
+		func = pci_get_device(pdev->vendor, pdev->device, func);
+		if (unlikely(!func))
+			return NULL;
+	}
+
+	return func;
+}
+
+static int cdns3_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *id)
+{
+	struct platform_device_info plat_info;
+	struct cdns3_wrap *wrap;
+	struct resource *res;
+	struct pci_dev *func;
+	int err;
+
+	/*
+	 * for GADGET/HOST PCI (devfn) function number is 0,
+	 * for OTG PCI (devfn) function number is 1
+	 */
+	if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+		    pdev->devfn != PCI_DEV_FN_OTG))
+		return -EINVAL;
+
+	func = cdns3_get_second_fun(pdev);
+	if (unlikely(!func))
+		return -EINVAL;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_is_enabled(func)) {
+		wrap = pci_get_drvdata(func);
+	} else {
+		wrap = kzalloc(sizeof(*wrap), GFP_KERNEL);
+		if (!wrap) {
+			pci_disable_device(pdev);
+			return -ENOMEM;
+		}
+	}
+
+	res = wrap->dev_res;
+
+	if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+		/* function 0: host(BAR_0) + device(BAR_1).*/
+		dev_dbg(&pdev->dev, "Initialize Device resources\n");
+		res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].end =   pci_resource_end(pdev, PCI_BAR_DEV);
+		res[RES_DEV_ID].name = "dev";
+		res[RES_DEV_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
+			&res[RES_DEV_ID].start);
+
+		res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+		res[RES_HOST_ID].name = "xhci";
+		res[RES_HOST_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
+			&res[RES_HOST_ID].start);
+
+		/* Interrupt for XHCI */
+		wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+		wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+		/* Interrupt device. It's the same as for HOST. */
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+		wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+	} else {
+		res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].end =   pci_resource_end(pdev, PCI_BAR_OTG);
+		res[RES_DRD_ID].name = "otg";
+		res[RES_DRD_ID].flags = IORESOURCE_MEM;
+		dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n",
+			&res[RES_DRD_ID].start);
+
+		/* Interrupt for OTG/DRD. */
+		wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+		wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+		wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+	}
+
+	if (pci_is_enabled(func)) {
+		/* set up platform device info */
+		memset(&plat_info, 0, sizeof(plat_info));
+		plat_info.parent = &pdev->dev;
+		plat_info.fwnode = pdev->dev.fwnode;
+		plat_info.name = PLAT_DRIVER_NAME;
+		plat_info.id = pdev->devfn;
+		wrap->devfn  = pdev->devfn;
+		plat_info.res = wrap->dev_res;
+		plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+		plat_info.dma_mask = pdev->dma_mask;
+		/* register platform device */
+		wrap->plat_dev = platform_device_register_full(&plat_info);
+		if (IS_ERR(wrap->plat_dev)) {
+			pci_disable_device(pdev);
+			kfree(wrap);
+			return PTR_ERR(wrap->plat_dev);
+		}
+	}
+
+	pci_set_drvdata(pdev, wrap);
+	return err;
+}
+
+static void cdns3_pci_remove(struct pci_dev *pdev)
+{
+	struct cdns3_wrap *wrap;
+	struct pci_dev *func;
+
+	func = cdns3_get_second_fun(pdev);
+
+	wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev);
+	if (wrap->devfn == pdev->devfn)
+		platform_device_unregister(wrap->plat_dev);
+
+	if (!pci_is_enabled(func))
+		kfree(wrap);
+}
+
+static const struct pci_device_id cdns3_pci_ids[] = {
+	{ PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), },
+	{ 0, }
+};
+
+static struct pci_driver cdns3_pci_driver = {
+	.name = PCI_DRIVER_NAME,
+	.id_table = cdns3_pci_ids,
+	.probe = cdns3_pci_probe,
+	.remove = cdns3_pci_remove,
+};
+
+module_pci_driver(cdns3_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdns3_pci_ids);
+
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USBSS PCI wrapperr");