Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 2 insertions, 16 deletions

diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 034477ce77c6..9a7ee3347e4d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2296,7 +2296,6 @@ static int fsl_qe_start(struct usb_gadget *gadget,
 	driver->driver.bus = NULL;
 	/* hook up the driver */
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	udc->gadget.speed = driver->max_speed;
 
 	/* Enable IRQ reg and Set usbcmd reg EN bit */
@@ -2338,7 +2337,6 @@ static int fsl_qe_stop(struct usb_gadget *gadget,
 		nuke(loop_ep, -ESHUTDOWN);
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	dev_info(udc->dev, "unregistered gadget driver '%s'\r\n",
@@ -2523,12 +2521,6 @@ static int qe_udc_probe(struct platform_device *ofdev)
 
 	/* name: Identifies the controller hardware type. */
 	udc->gadget.name = driver_name;
-
-	device_initialize(&udc->gadget.dev);
-
-	dev_set_name(&udc->gadget.dev, "gadget");
-
-	udc->gadget.dev.release = qe_udc_release;
 	udc->gadget.dev.parent = &ofdev->dev;
 
 	/* initialize qe_ep struct */
@@ -2592,22 +2584,17 @@ static int qe_udc_probe(struct platform_device *ofdev)
 		goto err5;
 	}
 
-	ret = device_add(&udc->gadget.dev);
+	ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget,
+			qe_udc_release);
 	if (ret)
 		goto err6;
 
-	ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget);
-	if (ret)
-		goto err7;
-
 	dev_set_drvdata(&ofdev->dev, udc);
 	dev_info(udc->dev,
 			"%s USB controller initialized as device\n",
 			(udc->soc_type == PORT_QE) ? "QE" : "CPM");
 	return 0;
 
-err7:
-	device_unregister(&udc->gadget.dev);
 err6:
 	free_irq(udc->usb_irq, udc);
 err5:
@@ -2702,7 +2689,6 @@ static int qe_udc_remove(struct platform_device *ofdev)
 
 	iounmap(udc->usb_regs);
 
-	device_unregister(&udc->gadget.dev);
 	/* wait for release() of gadget.dev to free udc */
 	wait_for_completion(&done);