Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...

83 files changed, 2980 insertions, 2749 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5a084b9cfa3c..b21cd376c11a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW
 	   This value will be used except for system-specific gadget
 	   drivers that have more specific information.
 
+config USB_GADGET_STORAGE_NUM_BUFFERS
+	int "Number of storage pipeline buffers"
+	range 2 4
+	default 2
+	help
+	   Usually 2 buffers are enough to establish a good buffering
+	   pipeline. The number may be increased in order to compensate
+	   for a bursty VFS behaviour. For instance there may be CPU wake up
+	   latencies that makes the VFS to appear bursty in a system with
+	   an CPU on-demand governor. Especially if DMA is doing IO to
+	   offload the CPU. In this case the CPU will go into power
+	   save often and spin up occasionally to move data within VFS.
+	   If selecting USB_GADGET_DEBUG_FILES this value may be set by
+	   a module parameter as well.
+	   If unsure, say 2.
+
 #
 # USB Peripheral Controller Support
 #
@@ -255,12 +271,11 @@ config USB_S3C_HSOTG
 	  integrated into the S3C64XX series SoC.
 
 config USB_IMX
-	tristate "Freescale IMX USB Peripheral Controller"
-	depends on ARCH_MX1
+	tristate "Freescale i.MX1 USB Peripheral Controller"
+	depends on ARCH_MXC
 	help
-	   Freescale's IMX series include an integrated full speed
-	   USB 1.1 device controller.  The controller in the IMX series
-	   is register-compatible.
+	   Freescale's i.MX1 includes an integrated full speed
+	   USB 1.1 device controller.
 
 	   It has Six fixed-function endpoints, as well as endpoint
 	   zero (for control transfers).
@@ -303,6 +318,18 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
+config USB_GADGET_DWC3
+	tristate "DesignWare USB3.0 (DRD) Controller"
+	depends on USB_DWC3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
+	  which can be configured for peripheral-only, host-only, hub-only
+	  and Dual-Role operation. This Controller was first integrated into
+	  the OMAP5 series of processors. More information about the OMAP5
+	  version of this controller, refer to http://www.ti.com/omap5.
+
 #
 # Controllers available in both integrated and discrete versions
 #
@@ -846,6 +873,16 @@ config USB_G_NOKIA
 	  It's only really useful for N900 hardware. If you're building
 	  a kernel for N900, say Y or M here. If unsure, say N.
 
+config USB_G_ACM_MS
+	tristate "CDC Composite Device (ACM and mass storage)"
+	depends on BLOCK
+	help
+	  This driver provides two functions in one configuration:
+	  a mass storage, and a CDC ACM (serial port) link.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_acm_ms".
+
 config USB_G_MULTI
 	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
 	depends on BLOCK && NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9ba725af4a08..b54ac6190890 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
-mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
+mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 
@@ -51,6 +51,7 @@ g_dbgp-y			:= dbgp.o
 g_nokia-y			:= nokia.o
 g_webcam-y			:= webcam.o
 g_ncm-y				:= ncm.o
+g_acm_ms-y			:= acm_ms.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -69,3 +70,4 @@ obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
+obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
new file mode 100644
index 000000000000..fdb7aec3bd0c
--- /dev/null
+++ b/drivers/usb/gadget/acm_ms.c
@@ -0,0 +1,256 @@
+/*
+ * acm_ms.c -- Composite driver, with ACM and mass storage support
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: David Brownell
+ * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
+ *
+ * Heavily based on multi.c and cdc2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_serial.h"
+
+#define DRIVER_DESC		"Composite Gadget (ACM + MS)"
+#define DRIVER_VERSION		"2011/10/10"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define ACM_MS_VENDOR_NUM	0x1d6b	/* Linux Foundation */
+#define ACM_MS_PRODUCT_NUM	0x0106	/* Composite Gadget: ACM + MS*/
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+#include "u_serial.c"
+#include "f_acm.c"
+#include "f_mass_storage.c"
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		cpu_to_le16(0x0200),
+
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(ACM_MS_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(ACM_MS_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	/*.bNumConfigurations =	DYNAMIC*/
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/*
+	 * REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We _always_ have both ACM and mass storage functions.
+ */
+static int __init acm_ms_do_config(struct usb_configuration *c)
+{
+	int	status;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+
+	status = acm_bind_config(c, 0);
+	if (status < 0)
+		return status;
+
+	status = fsg_bind_config(c->cdev, c, &fsg_common);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static struct usb_configuration acm_ms_config_driver = {
+	.label			= DRIVER_DESC,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init acm_ms_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			status;
+	void			*retp;
+
+	/* set up serial link layer */
+	status = gserial_setup(cdev->gadget, 1);
+	if (status < 0)
+		return status;
+
+	/* set up mass storage function */
+	retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
+	if (IS_ERR(retp)) {
+		status = PTR_ERR(retp);
+		goto fail0;
+	}
+
+	/* set bcdDevice */
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0) {
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	} else {
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
+				gadget->name,
+				acm_ms_config_driver.label);
+		device_desc.bcdDevice =
+			cpu_to_le16(0x0300 | 0x0099);
+	}
+
+	/*
+	 * Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail1;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail1;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
+	if (status < 0)
+		goto fail1;
+
+	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
+			DRIVER_DESC);
+	fsg_common_put(&fsg_common);
+	return 0;
+
+	/* error recovery */
+fail1:
+	fsg_common_put(&fsg_common);
+fail0:
+	gserial_cleanup();
+	return status;
+}
+
+static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
+{
+	gserial_cleanup();
+
+	return 0;
+}
+
+static struct usb_composite_driver acm_ms_driver = {
+	.name		= "g_acm_ms",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.unbind		= __exit_p(acm_ms_unbind),
+};
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Klaus Schwarzkopf <schwarzkopf@sensortherm.de>");
+MODULE_LICENSE("GPL v2");
+
+static int __init init(void)
+{
+	return usb_composite_probe(&acm_ms_driver, acm_ms_bind);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&acm_ms_driver);
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 70f2b376c86d..4730016d7cd4 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /*
@@ -354,7 +345,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
 	writel(tmp, &dev->ep[ep->num].regs->ctl);
 
 	/* set max packet size */
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	maxpacket = usb_endpoint_maxp(desc);
 	tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt);
 	tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE);
 	ep->ep.maxpacket = maxpacket;
@@ -3014,13 +3005,8 @@ __acquires(dev->lock)
 
 		/* link up all endpoints */
 		udc_setup_endpoints(dev);
-		if (dev->gadget.speed == USB_SPEED_HIGH) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"high");
-		} else if (dev->gadget.speed == USB_SPEED_FULL) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"full");
-		}
+		dev_info(&dev->pdev->dev, "Connect: %s\n",
+			 usb_speed_string(dev->gadget.speed));
 
 		/* init ep 0 */
 		activate_control_endpoints(dev);
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 1d1c7543468e..f87e29c65325 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef AMD5536UDC_H
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index ddb118a76807..8efe0fa9228d 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -9,16 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA  02111-1307, USA.
  */
 
 #undef	VERBOSE_DEBUG
@@ -460,7 +450,7 @@ static void nuke(struct at91_ep *ep, int status)
 {
 	struct at91_request *req;
 
-	// terminer chaque requete dans la queue
+	/* terminate any request in the queue */
 	ep->stopped = 1;
 	if (list_empty(&ep->queue))
 		return;
@@ -487,7 +477,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 			|| !desc || ep->desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
-			|| (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0
+			|| (maxpacket = usb_endpoint_maxp(desc)) == 0
 			|| maxpacket > ep->maxpacket) {
 		DBG("bad ep or descriptor\n");
 		return -EINVAL;
@@ -788,7 +778,7 @@ static const struct usb_ep_ops at91_ep_ops = {
 	.queue		= at91_ep_queue,
 	.dequeue	= at91_ep_dequeue,
 	.set_halt	= at91_ep_set_halt,
-	// there's only imprecise fifo status reporting
+	/* there's only imprecise fifo status reporting */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -846,7 +836,7 @@ static void udc_reinit(struct at91_udc *udc)
 		ep->fifo_bank = 0;
 		ep->ep.maxpacket = ep->maxpacket;
 		ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
-		// initialiser une queue par endpoint
+		/* initialize one queue per endpoint */
 		INIT_LIST_HEAD(&ep->queue);
 	}
 }
@@ -952,7 +942,7 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	// VDBG("vbus %s\n", is_active ? "on" : "off");
+	/* VDBG("vbus %s\n", is_active ? "on" : "off"); */
 	spin_lock_irqsave(&udc->lock, flags);
 	udc->vbus = (is_active != 0);
 	if (udc->driver)
@@ -1003,7 +993,7 @@ static const struct usb_gadget_ops at91_udc_ops = {
 	 * VBUS-powered devices may also also want to support bigger
 	 * power budgets after an appropriate SET_CONFIGURATION.
 	 */
-	// .vbus_power		= at91_vbus_power,
+	/* .vbus_power		= at91_vbus_power, */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1072,7 +1062,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 			ep->is_in = 0;
 		}
 	} else {
-		// REVISIT this happens sometimes under load; why??
+		/* REVISIT this happens sometimes under load; why?? */
 		ERR("SETUP len %d, csr %08x\n", rxcount, csr);
 		status = -EINVAL;
 	}
@@ -1451,7 +1441,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
 			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
 			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
-			// VDBG("bus suspend\n");
+			/* VDBG("bus suspend\n"); */
 			if (udc->suspended)
 				continue;
 			udc->suspended = 1;
@@ -1473,7 +1463,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
 			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
 			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
-			// VDBG("bus resume\n");
+			/* VDBG("bus resume\n"); */
 			if (!udc->suspended)
 				continue;
 			udc->suspended = 0;
@@ -1820,7 +1810,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
 	retval = request_irq(udc->udp_irq, at91_udc_irq,
-			IRQF_DISABLED, driver_name, udc);
+			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
 		goto fail1;
@@ -1848,7 +1838,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 				  jiffies + VBUS_POLL_TIMEOUT);
 		} else {
 			if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
-					IRQF_DISABLED, driver_name, udc)) {
+					0, driver_name, udc)) {
 				DBG("request vbus irq %d failed\n",
 				    udc->board.vbus_pin);
 				retval = -EBUSY;
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 108ca54f9092..3c0315b86ace 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -7,16 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 
 #ifndef AT91_UDC_H
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5b1665eb1bef..271a9d873608 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
 
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	maxpacket = usb_endpoint_maxp(desc) & 0x7ff;
 
 	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
 			|| ep->index == 0
@@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		 * Bits 11:12 specify number of _additional_
 		 * transactions per microframe.
 		 */
-		nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
+		nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1;
 		if (nr_trans > 3)
 			return -EINVAL;
 
@@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 			spin_lock(&udc->lock);
 		}
 
-		if (status & USBA_HIGH_SPEED) {
-			DBG(DBG_BUS, "High-speed bus reset detected\n");
+		if (status & USBA_HIGH_SPEED)
 			udc->gadget.speed = USB_SPEED_HIGH;
-		} else {
-			DBG(DBG_BUS, "Full-speed bus reset detected\n");
+		else
 			udc->gadget.speed = USB_SPEED_FULL;
-		}
+		DBG(DBG_BUS, "%s bus reset detected\n",
+		    usb_speed_string(udc->gadget.speed));
 
 		ep0 = &usba_ep[0];
 		ep0->desc = &usba_ep0_desc;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index b1c1afbb8750..672674c2fb3d 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 470981ad6f77..4eedfe557154 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -3,17 +3,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 1265a8502ea0..83428f56253b 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->num  = usb_endpoint_num(desc);
 	mEp->type = usb_endpoint_type(desc);
 
-	mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
+	mEp->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index aef47414f5d5..8a5529d214fb 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
@@ -164,7 +155,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 
 ep_found:
 	/* commit results */
-	_ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
 	_ep->desc = chosen_desc;
 	_ep->comp_desc = NULL;
 	_ep->maxburst = 0;
@@ -551,9 +542,9 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	if (cdev->gadget->ops->get_config_params)
 		cdev->gadget->ops->get_config_params(&dcd_config_params);
 	else {
-		dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT;
 		dcd_config_params.bU2DevExitLat =
-			cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT);
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
 	}
 	ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
 	ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
@@ -626,25 +617,9 @@ static int set_config(struct usb_composite_dev *cdev,
 		result = 0;
 	}
 
-	INFO(cdev, "%s speed config #%d: %s\n",
-		({ char *speed;
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:
-			speed = "low";
-			break;
-		case USB_SPEED_FULL:
-			speed = "full";
-			break;
-		case USB_SPEED_HIGH:
-			speed = "high";
-			break;
-		case USB_SPEED_SUPER:
-			speed = "super";
-			break;
-		default:
-			speed = "?";
-			break;
-		} ; speed; }), number, c ? c->label : "unconfigured");
+	INFO(cdev, "%s config #%d: %s\n",
+	     usb_speed_string(gadget->speed),
+	     number, c ? c->label : "unconfigured");
 
 	if (!c)
 		goto done;
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index b2c001334876..7542a72ce51a 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 8beefdd36787..f855ecf7a637 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -4,7 +4,6 @@
  * Copyright (C) 2010 Stephane Duverger
  *
  * Released under the GPLv2.
- *
  */
 
 /* verbose messages */
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index e755a9d267fc..ab8f1b488d54 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -439,7 +430,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	 * maximum packet size.
 	 * For SS devices the wMaxPacketSize is limited by 1024.
 	 */
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	max = usb_endpoint_maxp(desc) & 0x7ff;
 
 	/* drivers must not request bad settings, since lower levels
 	 * (hardware or its drivers) may not check.  some endpoints
@@ -1277,7 +1268,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
 		int	tmp;
 
 		/* high bandwidth mode */
-		tmp = le16_to_cpu(ep->desc->wMaxPacketSize);
+		tmp = usb_endpoint_maxp(ep->desc);
 		tmp = (tmp >> 11) & 0x03;
 		tmp *= 8 /* applies to entire frame */;
 		limit += limit * tmp;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7a7e6b7e1fd6..596a0b464e61 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -7,16 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/kernel.h>
@@ -158,7 +148,7 @@ ep_matches (
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
 	 */
-	max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+	max = 0x7ff & usb_endpoint_maxp(desc);
 	switch (type) {
 	case USB_ENDPOINT_XFER_INT:
 		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index aafc84f33e26..0cd764d59351 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index a9a4eade7e80..ec7ffcd0d0cd 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -460,7 +460,7 @@ static int audio_set_endpoint_req(struct usb_function *f,
 
 	switch (ctrl->bRequest) {
 	case UAC_SET_CUR:
-		value = 0;
+		value = len;
 		break;
 
 	case UAC_SET_MIN:
@@ -499,7 +499,7 @@ static int audio_get_endpoint_req(struct usb_function *f,
 	case UAC_GET_MIN:
 	case UAC_GET_MAX:
 	case UAC_GET_RES:
-		value = 3;
+		value = len;
 		break;
 	case UAC_GET_MEM:
 		break;
@@ -681,17 +681,18 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 
 	status = -ENOMEM;
 
-	/* supcard all relevant hardware speeds... we expect that when
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
 	 */
-
-	/* copy descriptors, and track endpoint copies */
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		c->highspeed = true;
 		f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
-	} else
-		f->descriptors = usb_copy_descriptors(f_audio_desc);
+	}
 
 	return 0;
 
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 3691a0cb9465..11c07cb7d337 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 046c6d0e6960..1a7b2dd7d408 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index c161a9aaeb7e..6b1c20b6c9b2 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -12,15 +12,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 83a266bdb40e..b2113420b806 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index ca660d40b11a..6d87f288df4e 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5b9339582007..52583a235330 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -112,8 +112,7 @@
  * is not loaded (an empty string as "filename" in the fsg_config
  * structure causes error).  The CD-ROM emulation includes a single
  * data track and no audio tracks; hence there need be only one
- * backing file per LUN.  Note also that the CD-ROM block length is
- * set to 512 rather than the more common value 2048.
+ * backing file per LUN.
  *
  *
  * MSF includes support for module parameters.  If gadget using it
@@ -363,7 +362,7 @@ struct fsg_common {
 
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
-	struct fsg_buffhd	buffhds[FSG_NUM_BUFFERS];
+	struct fsg_buffhd	*buffhds;
 
 	int			cmnd_size;
 	u8			cmnd[MAX_COMMAND_SIZE];
@@ -745,7 +744,6 @@ static int do_read(struct fsg_common *common)
 	u32			amount_left;
 	loff_t			file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nread;
 
 	/*
@@ -771,7 +769,7 @@ static int do_read(struct fsg_common *common)
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
-	file_offset = ((loff_t) lba) << 9;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Carry out the file reads */
 	amount_left = common->data_size_from_cmnd;
@@ -784,18 +782,10 @@ static int do_read(struct fsg_common *common)
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
-		 * Finally, if we're not at a page boundary, don't read past
-		 *	the next page.
-		 * If this means reading 0 then we were asked to read past
-		 *	the end of file.
 		 */
 		amount = min(amount_left, FSG_BUFLEN);
 		amount = min((loff_t)amount,
 			     curlun->file_length - file_offset);
-		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
-		if (partial_page > 0)
-			amount = min(amount, (unsigned int)PAGE_CACHE_SIZE -
-					     partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = common->next_buffhd_to_fill;
@@ -812,7 +802,8 @@ static int do_read(struct fsg_common *common)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			bh->inreq->length = 0;
 			bh->state = BUF_STATE_FULL;
@@ -835,18 +826,25 @@ static int do_read(struct fsg_common *common)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
 			     (int)nread, amount);
-			nread -= (nread & 511);	/* Round down to a block */
+			nread = round_down(nread, curlun->blksize);
 		}
 		file_offset  += nread;
 		amount_left  -= nread;
 		common->residue -= nread;
+
+		/*
+		 * Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
 		bh->inreq->length = nread;
 		bh->state = BUF_STATE_FULL;
 
 		/* If an error occurred, report it and its position */
 		if (nread < amount) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -877,7 +875,6 @@ static int do_write(struct fsg_common *common)
 	u32			amount_left_to_req, amount_left_to_write;
 	loff_t			usb_offset, file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nwritten;
 	int			rc;
 
@@ -921,7 +918,7 @@ static int do_write(struct fsg_common *common)
 
 	/* Carry out the file writes */
 	get_some_more = 1;
-	file_offset = usb_offset = ((loff_t) lba) << 9;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
 	amount_left_to_req = common->data_size_from_cmnd;
 	amount_left_to_write = common->data_size_from_cmnd;
 
@@ -933,41 +930,21 @@ static int do_write(struct fsg_common *common)
 
 			/*
 			 * Figure out how much we want to get:
-			 * Try to get the remaining amount.
-			 * But don't get more than the buffer size.
-			 * And don't try to go past the end of the file.
-			 * If we're not at a page boundary,
-			 *	don't go past the next page.
-			 * If this means getting 0, then we were asked
-			 *	to write past the end of file.
-			 * Finally, round down to a block boundary.
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
 			 */
 			amount = min(amount_left_to_req, FSG_BUFLEN);
-			amount = min((loff_t)amount,
-				     curlun->file_length - usb_offset);
-			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
-			if (partial_page > 0)
-				amount = min(amount,
-	(unsigned int)PAGE_CACHE_SIZE - partial_page);
-
-			if (amount == 0) {
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
 				get_some_more = 0;
 				curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-				curlun->sense_data_info = usb_offset >> 9;
+				curlun->sense_data_info =
+					usb_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= amount & 511;
-			if (amount == 0) {
-
-				/*
-				 * Why were we were asked to transfer a
-				 * partial block?
-				 */
-				get_some_more = 0;
-				continue;
-			}
 
 			/* Get the next buffer */
 			usb_offset += amount;
@@ -977,12 +954,11 @@ static int do_write(struct fsg_common *common)
 				get_some_more = 0;
 
 			/*
-			 * amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
 			 */
-			bh->outreq->length = amount;
-			bh->bulk_out_intended_length = amount;
-			bh->outreq->short_not_ok = 1;
+			set_bulk_out_req_length(common, bh, amount);
 			if (!start_out_transfer(common, bh))
 				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
@@ -1002,7 +978,8 @@ static int do_write(struct fsg_common *common)
 			/* Did something go wrong with the transfer? */
 			if (bh->outreq->status != 0) {
 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
@@ -1016,6 +993,16 @@ static int do_write(struct fsg_common *common)
 				amount = curlun->file_length - file_offset;
 			}
 
+			/* Don't accept excess data.  The spec doesn't say
+			 * what to do in this case.  We'll ignore the error.
+			 */
+			amount = min(amount, bh->bulk_out_intended_length);
+
+			/* Don't write a partial block */
+			amount = round_down(amount, curlun->blksize);
+			if (amount == 0)
+				goto empty_write;
+
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
@@ -1033,8 +1020,7 @@ static int do_write(struct fsg_common *common)
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
 				     (int)nwritten, amount);
-				nwritten -= (nwritten & 511);
-				/* Round down to a block */
+				nwritten = round_down(nwritten, curlun->blksize);
 			}
 			file_offset += nwritten;
 			amount_left_to_write -= nwritten;
@@ -1043,13 +1029,15 @@ static int do_write(struct fsg_common *common)
 			/* If an error occurred, report it and its position */
 			if (nwritten < amount) {
 				curlun->sense_data = SS_WRITE_ERROR;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
 
+ empty_write:
 			/* Did the host decide to stop early? */
-			if (bh->outreq->actual != bh->outreq->length) {
+			if (bh->outreq->actual < bh->bulk_out_intended_length) {
 				common->short_packet_received = 1;
 				break;
 			}
@@ -1129,8 +1117,8 @@ static int do_verify(struct fsg_common *common)
 		return -EIO;		/* No default reply */
 
 	/* Prepare to carry out the file verify */
-	amount_left = verification_length << 9;
-	file_offset = ((loff_t) lba) << 9;
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Write out all the dirty buffers before invalidating them */
 	fsg_lun_fsync_sub(curlun);
@@ -1148,8 +1136,6 @@ static int do_verify(struct fsg_common *common)
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
-		 * If this means reading 0 then we were asked to read
-		 * past the end of file.
 		 */
 		amount = min(amount_left, FSG_BUFLEN);
 		amount = min((loff_t)amount,
@@ -1157,7 +1143,8 @@ static int do_verify(struct fsg_common *common)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1179,11 +1166,12 @@ static int do_verify(struct fsg_common *common)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
 			     (int)nread, amount);
-			nread -= nread & 511;	/* Round down to a sector */
+			nread = round_down(nread, curlun->blksize);
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1289,7 +1277,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 
 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
 						/* Max logical block */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
 	return 8;
 }
 
@@ -1527,7 +1515,7 @@ static int do_read_format_capacities(struct fsg_common *common,
 
 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
 						/* Number of blocks */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
 	buf[4] = 0x02;				/* Current capacity */
 	return 12;
 }
@@ -1607,7 +1595,7 @@ static int throw_away_data(struct fsg_common *common)
 			common->next_buffhd_to_drain = bh->next;
 
 			/* A short packet or an error ends everything */
-			if (bh->outreq->actual != bh->outreq->length ||
+			if (bh->outreq->actual < bh->bulk_out_intended_length ||
 			    bh->outreq->status != 0) {
 				raise_exception(common,
 						FSG_STATE_ABORT_BULK_OUT);
@@ -1623,12 +1611,11 @@ static int throw_away_data(struct fsg_common *common)
 			amount = min(common->usb_amount_left, FSG_BUFLEN);
 
 			/*
-			 * amount is always divisible by 512, hence by
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
 			 * the bulk-out maxpacket size.
 			 */
-			bh->outreq->length = amount;
-			bh->bulk_out_intended_length = amount;
-			bh->outreq->short_not_ok = 1;
+			set_bulk_out_req_length(common, bh, amount);
 			if (!start_out_transfer(common, bh))
 				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
@@ -2022,7 +2009,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+				common->curlun->blkbits;
 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "READ(6)");
@@ -2032,7 +2020,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) << 9;
+				get_unaligned_be16(&common->cmnd[7]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "READ(10)");
@@ -2042,7 +2031,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) << 9;
+				get_unaligned_be32(&common->cmnd[6]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 12, DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "READ(12)");
@@ -2142,7 +2132,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+					common->curlun->blkbits;
 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "WRITE(6)");
@@ -2152,7 +2143,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) << 9;
+				get_unaligned_be16(&common->cmnd[7]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "WRITE(10)");
@@ -2162,7 +2154,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) << 9;
+				get_unaligned_be32(&common->cmnd[6]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 12, DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "WRITE(12)");
@@ -2297,7 +2290,6 @@ static int get_next_command(struct fsg_common *common)
 
 	/* Queue a request to read a Bulk-only CBW */
 	set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
-	bh->outreq->short_not_ok = 1;
 	if (!start_out_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
@@ -2348,7 +2340,7 @@ reset:
 	if (common->fsg) {
 		fsg = common->fsg;
 
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			struct fsg_buffhd *bh = &common->buffhds[i];
 
 			if (bh->inreq) {
@@ -2401,12 +2393,11 @@ reset:
 		goto reset;
 	fsg->bulk_out->driver_data = common;
 	fsg->bulk_out_enabled = 1;
-	common->bulk_out_maxpacket =
-		le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize);
+	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &common->buffhds[i];
 
 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
@@ -2475,7 +2466,7 @@ static void handle_exception(struct fsg_common *common)
 
 	/* Cancel all the pending transfers */
 	if (likely(common->fsg)) {
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			bh = &common->buffhds[i];
 			if (bh->inreq_busy)
 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
@@ -2487,7 +2478,7 @@ static void handle_exception(struct fsg_common *common)
 		/* Wait until everything is idle */
 		for (;;) {
 			int num_active = 0;
-			for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+			for (i = 0; i < fsg_num_buffers; ++i) {
 				bh = &common->buffhds[i];
 				num_active += bh->inreq_busy + bh->outreq_busy;
 			}
@@ -2510,7 +2501,7 @@ static void handle_exception(struct fsg_common *common)
 	 */
 	spin_lock_irq(&common->lock);
 
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &common->buffhds[i];
 		bh->state = BUF_STATE_EMPTY;
 	}
@@ -2719,6 +2710,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	int nluns, i, rc;
 	char *pathbuf;
 
+	rc = fsg_num_buffers_validate();
+	if (rc != 0)
+		return ERR_PTR(rc);
+
 	/* Find out how many LUNs there should be */
 	nluns = cfg->nluns;
 	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
@@ -2737,6 +2732,14 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		common->free_storage_on_release = 0;
 	}
 
+	common->buffhds = kcalloc(fsg_num_buffers,
+				  sizeof *(common->buffhds), GFP_KERNEL);
+	if (!common->buffhds) {
+		if (common->free_storage_on_release)
+			kfree(common);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	common->ops = cfg->ops;
 	common->private_data = cfg->private_data;
 
@@ -2814,7 +2817,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 
 	/* Data buffers cyclic list */
 	bh = common->buffhds;
-	i = FSG_NUM_BUFFERS;
+	i = fsg_num_buffers;
 	goto buffhds_first_it;
 	do {
 		bh->next = bh + 1;
@@ -2940,12 +2943,13 @@ static void fsg_common_release(struct kref *ref)
 
 	{
 		struct fsg_buffhd *bh = common->buffhds;
-		unsigned i = FSG_NUM_BUFFERS;
+		unsigned i = fsg_num_buffers;
 		do {
 			kfree(bh->buf);
 		} while (++bh, --i);
 	}
 
+	kfree(common->buffhds);
 	if (common->free_storage_on_release)
 		kfree(common);
 }
@@ -3019,6 +3023,28 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 		}
 	}
 
+	if (gadget_is_superspeed(gadget)) {
+		unsigned	max_burst;
+
+		/* Calculate bMaxBurst, we know packet size is 1024 */
+		max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+
+		fsg_ss_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+		fsg_ss_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+
+		f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
+		if (unlikely(!f->ss_descriptors)) {
+			usb_free_descriptors(f->hs_descriptors);
+			usb_free_descriptors(f->descriptors);
+			return -ENOMEM;
+		}
+	}
+
 	return 0;
 
 autoconf_fail:
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
new file mode 100644
index 000000000000..67b222908cf9
--- /dev/null
+++ b/drivers/usb/gadget/f_midi.c
@@ -0,0 +1,998 @@
+/*
+ * f_midi.c -- USB MIDI class function driver
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * Rewritten for the composite framework
+ *   Copyright (C) 2011 Daniel Mack <zonque@gmail.com>
+ *
+ * Based on drivers/usb/gadget/f_audio.c,
+ *   Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ *   Copyright (C) 2008 Analog Devices, Inc
+ *
+ * and drivers/usb/gadget/midi.c,
+ *   Copyright (C) 2006 Thumtronics Pty Ltd.
+ *   Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/midi.h>
+
+MODULE_AUTHOR("Ben Williamson");
+MODULE_LICENSE("GPL v2");
+
+static const char f_midi_shortname[] = "f_midi";
+static const char f_midi_longname[] = "MIDI Gadget";
+
+/*
+ * We can only handle 16 cables on one single endpoint, as cable numbers are
+ * stored in 4-bit fields. And as the interface currently only holds one
+ * single endpoint, this is the maximum number of ports we can allow.
+ */
+#define MAX_PORTS 16
+
+/*
+ * This is a gadget, and the IN/OUT naming is from the host's perspective.
+ * USB -> OUT endpoint -> rawmidi
+ * USB <- IN endpoint  <- rawmidi
+ */
+struct gmidi_in_port {
+	struct f_midi *midi;
+	int active;
+	uint8_t cable;
+	uint8_t state;
+#define STATE_UNKNOWN	0
+#define STATE_1PARAM	1
+#define STATE_2PARAM_1	2
+#define STATE_2PARAM_2	3
+#define STATE_SYSEX_0	4
+#define STATE_SYSEX_1	5
+#define STATE_SYSEX_2	6
+	uint8_t data[2];
+};
+
+struct f_midi {
+	struct usb_function	func;
+	struct usb_gadget	*gadget;
+	struct usb_ep		*in_ep, *out_ep;
+	struct snd_card		*card;
+	struct snd_rawmidi	*rmidi;
+
+	struct snd_rawmidi_substream *in_substream[MAX_PORTS];
+	struct snd_rawmidi_substream *out_substream[MAX_PORTS];
+	struct gmidi_in_port	*in_port[MAX_PORTS];
+
+	unsigned long		out_triggered;
+	struct tasklet_struct	tasklet;
+	unsigned int in_ports;
+	unsigned int out_ports;
+	int index;
+	char *id;
+	unsigned int buflen, qlen;
+};
+
+static inline struct f_midi *func_to_midi(struct usb_function *f)
+{
+	return container_of(f, struct f_midi, func);
+}
+
+static void f_midi_transmit(struct f_midi *midi, struct usb_request *req);
+
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16);
+DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc __initdata = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	/* .bNumEndpoints =	DYNAMIC */
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = {
+	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdADC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
+	.bInCollection =	1,
+	/* .baInterfaceNr =	DYNAMIC */
+};
+
+/* B.4.1  Standard MS Interface Descriptor */
+static struct usb_interface_descriptor ms_interface_desc __initdata = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_MIDISTREAMING,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.4.2  Class-Specific MS Interface Descriptor */
+static struct usb_ms_header_descriptor ms_header_desc __initdata = {
+	.bLength =		USB_DT_MS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdMSC =		cpu_to_le16(0x0100),
+	/* .wTotalLength =	DYNAMIC */
+};
+
+/* B.4.3  Embedded MIDI IN Jack Descriptor */
+static struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
+	.bLength =	      USB_DT_MIDI_IN_SIZE,
+	.bDescriptorType =      USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =   USB_MS_MIDI_IN_JACK,
+	.bJackType =	    USB_MS_EMBEDDED,
+	/* .bJackID =		DYNAMIC */
+};
+
+/* B.4.4  Embedded MIDI OUT Jack Descriptor */
+static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
+	.bJackType =		USB_MS_EMBEDDED,
+	/* .bJackID =		DYNAMIC */
+	/* .bNrInputPins =	DYNAMIC */
+	/* .pins =		DYNAMIC */
+};
+
+/* B.5.1  Standard Bulk OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.5.2  Class-specific MS Bulk OUT Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_out_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* B.6.1  Standard Bulk IN Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.6.2  Class-specific MS Bulk IN Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_in_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_FUNC_IDX			0
+
+static struct usb_string midi_string_defs[] = {
+	[STRING_FUNC_IDX].s = "MIDI function",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings midi_stringtab = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= midi_string_defs,
+};
+
+static struct usb_gadget_strings *midi_strings[] = {
+	&midi_stringtab,
+	NULL,
+};
+
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
+{
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (req) {
+		req->length = length;
+		req->buf = kmalloc(length, GFP_ATOMIC);
+		if (!req->buf) {
+			usb_ep_free_request(ep, req);
+			req = NULL;
+		}
+	}
+	return req;
+}
+
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+static const uint8_t f_midi_cin_length[] = {
+	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+};
+
+/*
+ * Receives a chunk of MIDI data.
+ */
+static void f_midi_read_data(struct usb_ep *ep, int cable,
+			     uint8_t *data, int length)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct snd_rawmidi_substream *substream = midi->out_substream[cable];
+
+	if (!substream)
+		/* Nobody is listening - throw it on the floor. */
+		return;
+
+	if (!test_bit(cable, &midi->out_triggered))
+		return;
+
+	snd_rawmidi_receive(substream, data, length);
+}
+
+static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
+{
+	unsigned int i;
+	u8 *buf = req->buf;
+
+	for (i = 0; i + 3 < req->actual; i += 4)
+		if (buf[i] != 0) {
+			int cable = buf[i] >> 4;
+			int length = f_midi_cin_length[buf[i] & 0x0f];
+			f_midi_read_data(ep, cable, &buf[i + 1], length);
+		}
+}
+
+static void
+f_midi_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct usb_composite_dev *cdev = midi->func.config->cdev;
+	int status = req->status;
+
+	switch (status) {
+	case 0:			 /* normal completion */
+		if (ep == midi->out_ep) {
+			/* We received stuff. req is queued again, below */
+			f_midi_handle_out_data(ep, req);
+		} else if (ep == midi->in_ep) {
+			/* Our transmit completed. See if there's more to go.
+			 * f_midi_transmit eats req, don't queue it again. */
+			f_midi_transmit(midi, req);
+			return;
+		}
+		break;
+
+	/* this endpoint is normally active while we're configured */
+	case -ECONNABORTED:	/* hardware forced ep reset */
+	case -ECONNRESET:	/* request dequeued */
+	case -ESHUTDOWN:	/* disconnect from host */
+		VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+				req->actual, req->length);
+		if (ep == midi->out_ep)
+			f_midi_handle_out_data(ep, req);
+
+		free_ep_req(ep, req);
+		return;
+
+	case -EOVERFLOW:	/* buffer overrun on read means that
+				 * we didn't provide a big enough buffer.
+				 */
+	default:
+		DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+				status, req->actual, req->length);
+		break;
+	case -EREMOTEIO:	/* short read */
+		break;
+	}
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status) {
+		ERROR(cdev, "kill %s:  resubmit %d bytes --> %d\n",
+				ep->name, req->length, status);
+		usb_ep_set_halt(ep);
+		/* FIXME recover later ... somehow */
+	}
+}
+
+static int f_midi_start_ep(struct f_midi *midi,
+			   struct usb_function *f,
+			   struct usb_ep *ep)
+{
+	int err;
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (ep->driver_data)
+		usb_ep_disable(ep);
+
+	err = config_ep_by_speed(midi->gadget, f, ep);
+	if (err) {
+		ERROR(cdev, "can't configure %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	err = usb_ep_enable(ep);
+	if (err) {
+		ERROR(cdev, "can't start %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	ep->driver_data = midi;
+
+	return 0;
+}
+
+static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	unsigned i;
+	int err;
+
+	err = f_midi_start_ep(midi, f, midi->in_ep);
+	if (err)
+		return err;
+
+	err = f_midi_start_ep(midi, f, midi->out_ep);
+	if (err)
+		return err;
+
+	if (midi->out_ep->driver_data)
+		usb_ep_disable(midi->out_ep);
+
+	err = config_ep_by_speed(midi->gadget, f, midi->out_ep);
+	if (err) {
+		ERROR(cdev, "can't configure %s: %d\n",
+		      midi->out_ep->name, err);
+		return err;
+	}
+
+	err = usb_ep_enable(midi->out_ep);
+	if (err) {
+		ERROR(cdev, "can't start %s: %d\n",
+		      midi->out_ep->name, err);
+		return err;
+	}
+
+	midi->out_ep->driver_data = midi;
+
+	/* allocate a bunch of read buffers and queue them all at once. */
+	for (i = 0; i < midi->qlen && err == 0; i++) {
+		struct usb_request *req =
+			alloc_ep_req(midi->out_ep, midi->buflen);
+		if (req == NULL)
+			return -ENOMEM;
+
+		req->complete = f_midi_complete;
+		err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
+		if (err) {
+			ERROR(midi, "%s queue req: %d\n",
+				    midi->out_ep->name, err);
+		}
+	}
+
+	return 0;
+}
+
+static void f_midi_disable(struct usb_function *f)
+{
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "disable\n");
+
+	/*
+	 * just disable endpoints, forcing completion of pending i/o.
+	 * all our completion handlers free their requests in this case.
+	 */
+	usb_ep_disable(midi->in_ep);
+	usb_ep_disable(midi->out_ep);
+}
+
+static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	struct snd_card *card;
+
+	DBG(cdev, "unbind\n");
+
+	/* just to be sure */
+	f_midi_disable(f);
+
+	card = midi->card;
+	midi->card = NULL;
+	if (card)
+		snd_card_free(card);
+
+	kfree(midi->id);
+	midi->id = NULL;
+
+	usb_free_descriptors(f->descriptors);
+	kfree(midi);
+}
+
+static int f_midi_snd_free(struct snd_device *device)
+{
+	return 0;
+}
+
+static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0,
+					uint8_t p1, uint8_t p2, uint8_t p3)
+{
+	unsigned length = req->length;
+	u8 *buf = (u8 *)req->buf + length;
+
+	buf[0] = p0;
+	buf[1] = p1;
+	buf[2] = p2;
+	buf[3] = p3;
+	req->length = length + 4;
+}
+
+/*
+ * Converts MIDI commands to USB MIDI packets.
+ */
+static void f_midi_transmit_byte(struct usb_request *req,
+				 struct gmidi_in_port *port, uint8_t b)
+{
+	uint8_t p0 = port->cable << 4;
+
+	if (b >= 0xf8) {
+		f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
+	} else if (b >= 0xf0) {
+		switch (b) {
+		case 0xf0:
+			port->data[0] = b;
+			port->state = STATE_SYSEX_1;
+			break;
+		case 0xf1:
+		case 0xf3:
+			port->data[0] = b;
+			port->state = STATE_1PARAM;
+			break;
+		case 0xf2:
+			port->data[0] = b;
+			port->state = STATE_2PARAM_1;
+			break;
+		case 0xf4:
+		case 0xf5:
+			port->state = STATE_UNKNOWN;
+			break;
+		case 0xf6:
+			f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
+			port->state = STATE_UNKNOWN;
+			break;
+		case 0xf7:
+			switch (port->state) {
+			case STATE_SYSEX_0:
+				f_midi_transmit_packet(req,
+					p0 | 0x05, 0xf7, 0, 0);
+				break;
+			case STATE_SYSEX_1:
+				f_midi_transmit_packet(req,
+					p0 | 0x06, port->data[0], 0xf7, 0);
+				break;
+			case STATE_SYSEX_2:
+				f_midi_transmit_packet(req,
+					p0 | 0x07, port->data[0],
+					port->data[1], 0xf7);
+				break;
+			}
+			port->state = STATE_UNKNOWN;
+			break;
+		}
+	} else if (b >= 0x80) {
+		port->data[0] = b;
+		if (b >= 0xc0 && b <= 0xdf)
+			port->state = STATE_1PARAM;
+		else
+			port->state = STATE_2PARAM_1;
+	} else { /* b < 0x80 */
+		switch (port->state) {
+		case STATE_1PARAM:
+			if (port->data[0] < 0xf0) {
+				p0 |= port->data[0] >> 4;
+			} else {
+				p0 |= 0x02;
+				port->state = STATE_UNKNOWN;
+			}
+			f_midi_transmit_packet(req, p0, port->data[0], b, 0);
+			break;
+		case STATE_2PARAM_1:
+			port->data[1] = b;
+			port->state = STATE_2PARAM_2;
+			break;
+		case STATE_2PARAM_2:
+			if (port->data[0] < 0xf0) {
+				p0 |= port->data[0] >> 4;
+				port->state = STATE_2PARAM_1;
+			} else {
+				p0 |= 0x03;
+				port->state = STATE_UNKNOWN;
+			}
+			f_midi_transmit_packet(req,
+				p0, port->data[0], port->data[1], b);
+			break;
+		case STATE_SYSEX_0:
+			port->data[0] = b;
+			port->state = STATE_SYSEX_1;
+			break;
+		case STATE_SYSEX_1:
+			port->data[1] = b;
+			port->state = STATE_SYSEX_2;
+			break;
+		case STATE_SYSEX_2:
+			f_midi_transmit_packet(req,
+				p0 | 0x04, port->data[0], port->data[1], b);
+			port->state = STATE_SYSEX_0;
+			break;
+		}
+	}
+}
+
+static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
+{
+	struct usb_ep *ep = midi->in_ep;
+	int i;
+
+	if (!ep)
+		return;
+
+	if (!req)
+		req = alloc_ep_req(ep, midi->buflen);
+
+	if (!req) {
+		ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n");
+		return;
+	}
+	req->length = 0;
+	req->complete = f_midi_complete;
+
+	for (i = 0; i < MAX_PORTS; i++) {
+		struct gmidi_in_port *port = midi->in_port[i];
+		struct snd_rawmidi_substream *substream = midi->in_substream[i];
+
+		if (!port || !port->active || !substream)
+			continue;
+
+		while (req->length + 3 < midi->buflen) {
+			uint8_t b;
+			if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
+				port->active = 0;
+				break;
+			}
+			f_midi_transmit_byte(req, port, b);
+		}
+	}
+
+	if (req->length > 0)
+		usb_ep_queue(ep, req, GFP_ATOMIC);
+	else
+		free_ep_req(ep, req);
+}
+
+static void f_midi_in_tasklet(unsigned long data)
+{
+	struct f_midi *midi = (struct f_midi *) data;
+	f_midi_transmit(midi, NULL);
+}
+
+static int f_midi_in_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (!midi->in_port[substream->number])
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	midi->in_substream[substream->number] = substream;
+	midi->in_port[substream->number]->state = STATE_UNKNOWN;
+	return 0;
+}
+
+static int f_midi_in_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (!midi->in_port[substream->number])
+		return;
+
+	VDBG(midi, "%s() %d\n", __func__, up);
+	midi->in_port[substream->number]->active = up;
+	if (up)
+		tasklet_hi_schedule(&midi->tasklet);
+}
+
+static int f_midi_out_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (substream->number >= MAX_PORTS)
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	midi->out_substream[substream->number] = substream;
+	return 0;
+}
+
+static int f_midi_out_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+
+	if (up)
+		set_bit(substream->number, &midi->out_triggered);
+	else
+		clear_bit(substream->number, &midi->out_triggered);
+}
+
+static struct snd_rawmidi_ops gmidi_in_ops = {
+	.open = f_midi_in_open,
+	.close = f_midi_in_close,
+	.trigger = f_midi_in_trigger,
+};
+
+static struct snd_rawmidi_ops gmidi_out_ops = {
+	.open = f_midi_out_open,
+	.close = f_midi_out_close,
+	.trigger = f_midi_out_trigger
+};
+
+/* register as a sound "card" */
+static int f_midi_register_card(struct f_midi *midi)
+{
+	struct snd_card *card;
+	struct snd_rawmidi *rmidi;
+	int err;
+	static struct snd_device_ops ops = {
+		.dev_free = f_midi_snd_free,
+	};
+
+	err = snd_card_create(midi->index, midi->id, THIS_MODULE, 0, &card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_create() failed\n");
+		goto fail;
+	}
+	midi->card = card;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops);
+	if (err < 0) {
+		ERROR(midi, "snd_device_new() failed: error %d\n", err);
+		goto fail;
+	}
+
+	strcpy(card->driver, f_midi_longname);
+	strcpy(card->longname, f_midi_longname);
+	strcpy(card->shortname, f_midi_shortname);
+
+	/* Set up rawmidi */
+	snd_component_add(card, "MIDI");
+	err = snd_rawmidi_new(card, card->longname, 0,
+			      midi->out_ports, midi->in_ports, &rmidi);
+	if (err < 0) {
+		ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err);
+		goto fail;
+	}
+	midi->rmidi = rmidi;
+	strcpy(rmidi->name, card->shortname);
+	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+			    SNDRV_RAWMIDI_INFO_INPUT |
+			    SNDRV_RAWMIDI_INFO_DUPLEX;
+	rmidi->private_data = midi;
+
+	/*
+	 * Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
+	 * It's an upside-down world being a gadget.
+	 */
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
+
+	snd_card_set_dev(card, &midi->gadget->dev);
+
+	/* register it - we're ready to go */
+	err = snd_card_register(card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_register() failed\n");
+		goto fail;
+	}
+
+	VDBG(midi, "%s() finished ok\n", __func__);
+	return 0;
+
+fail:
+	if (midi->card) {
+		snd_card_free(midi->card);
+		midi->card = NULL;
+	}
+	return err;
+}
+
+/* MIDI function driver setup/binding */
+
+static int __init
+f_midi_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12];
+	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	int status, n, jack = 1, i = 0;
+
+	/* maybe allocate device-global string ID */
+	if (midi_string_defs[0].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			goto fail;
+		midi_string_defs[0].id = status;
+	}
+
+	/* We have two interfaces, AudioControl and MIDIStreaming */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ac_interface_desc.bInterfaceNumber = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ms_interface_desc.bInterfaceNumber = status;
+	ac_header_desc.baInterfaceNr[0] = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc);
+	if (!midi->in_ep)
+		goto fail;
+	midi->in_ep->driver_data = cdev;	/* claim */
+
+	midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc);
+	if (!midi->out_ep)
+		goto fail;
+	midi->out_ep->driver_data = cdev;	/* claim */
+
+	/*
+	 * construct the function's descriptor set. As the number of
+	 * input and output MIDI ports is configurable, we have to do
+	 * it that way.
+	 */
+
+	/* add the headers - these are always the same */
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc;
+
+	/* calculate the header's wTotalLength */
+	n = USB_DT_MS_HEADER_SIZE
+		+ (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE
+		+ (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1);
+	ms_header_desc.wTotalLength = cpu_to_le16(n);
+
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
+
+	/* we have one embedded IN jack */
+	jack_in_emb_desc.bJackID = jack++;
+	midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc;
+
+	/* and a dynamic amount of external IN jacks */
+	for (n = 0; n < midi->in_ports; n++) {
+		struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n];
+
+		ext->bLength =			USB_DT_MIDI_IN_SIZE;
+		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
+		ext->bDescriptorSubtype =	USB_MS_MIDI_IN_JACK;
+		ext->bJackType =		USB_MS_EXTERNAL;
+		ext->bJackID =			jack++;
+		ext->iJack =			0;
+
+		midi_function[i++] = (struct usb_descriptor_header *) ext;
+	}
+
+	/* one embedded OUT jack ... */
+	jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports);
+	jack_out_emb_desc.bJackID = jack++;
+	jack_out_emb_desc.bNrInputPins = midi->in_ports;
+	/* ... which referencess all external IN jacks */
+	for (n = 0; n < midi->in_ports; n++) {
+		jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID;
+		jack_out_emb_desc.pins[n].baSourcePin =	1;
+	}
+
+	midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc;
+
+	/* and multiple external OUT jacks ... */
+	for (n = 0; n < midi->out_ports; n++) {
+		struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n];
+		int m;
+
+		ext->bLength =			USB_DT_MIDI_OUT_SIZE(1);
+		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
+		ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		ext->bJackType =		USB_MS_EXTERNAL;
+		ext->bJackID =			jack++;
+		ext->bNrInputPins =		1;
+		ext->iJack =			0;
+		/* ... which all reference the same embedded IN jack */
+		for (m = 0; m < midi->out_ports; m++) {
+			ext->pins[m].baSourceID =	jack_in_emb_desc.bJackID;
+			ext->pins[m].baSourcePin =	1;
+		}
+
+		midi_function[i++] = (struct usb_descriptor_header *) ext;
+	}
+
+	/* configure the endpoint descriptors ... */
+	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
+	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
+	for (n = 0; n < midi->in_ports; n++)
+		ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID;
+
+	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
+	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
+	for (n = 0; n < midi->out_ports; n++)
+		ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID;
+
+	/* ... and add them to the list */
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc;
+	midi_function[i++] = NULL;
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	/* copy descriptors, and track endpoint copies */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		c->highspeed = true;
+		bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
+		bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
+		f->hs_descriptors = usb_copy_descriptors(midi_function);
+	} else {
+		f->descriptors = usb_copy_descriptors(midi_function);
+	}
+
+	return 0;
+
+fail:
+	/* we might as well release our claims on endpoints */
+	if (midi->out_ep)
+		midi->out_ep->driver_data = NULL;
+	if (midi->in_ep)
+		midi->in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+/**
+ * f_midi_bind_config - add USB MIDI function to a configuration
+ * @c: the configuration to supcard the USB audio function
+ * @index: the soundcard index to use for the ALSA device creation
+ * @id: the soundcard id to use for the ALSA device creation
+ * @buflen: the buffer length to use
+ * @qlen the number of read requests to pre-allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ */
+int __init f_midi_bind_config(struct usb_configuration *c,
+			      int index, char *id,
+			      unsigned int in_ports,
+			      unsigned int out_ports,
+			      unsigned int buflen,
+			      unsigned int qlen)
+{
+	struct f_midi *midi;
+	int status, i;
+
+	/* sanity check */
+	if (in_ports > MAX_PORTS || out_ports > MAX_PORTS)
+		return -EINVAL;
+
+	/* allocate and initialize one new instance */
+	midi = kzalloc(sizeof *midi, GFP_KERNEL);
+	if (!midi) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
+	for (i = 0; i < in_ports; i++) {
+		struct gmidi_in_port *port = kzalloc(sizeof(*port), GFP_KERNEL);
+		if (!port) {
+			status = -ENOMEM;
+			goto setup_fail;
+		}
+
+		port->midi = midi;
+		port->active = 0;
+		port->cable = i;
+		midi->in_port[i] = port;
+	}
+
+	midi->gadget = c->cdev->gadget;
+	tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi);
+
+	/* set up ALSA midi devices */
+	midi->in_ports = in_ports;
+	midi->out_ports = out_ports;
+	status = f_midi_register_card(midi);
+	if (status < 0)
+		goto setup_fail;
+
+	midi->func.name        = "gmidi function";
+	midi->func.strings     = midi_strings;
+	midi->func.bind        = f_midi_bind;
+	midi->func.unbind      = f_midi_unbind;
+	midi->func.set_alt     = f_midi_set_alt;
+	midi->func.disable     = f_midi_disable;
+
+	midi->id = kstrdup(id, GFP_KERNEL);
+	midi->index = index;
+	midi->buflen = buflen;
+	midi->qlen = qlen;
+
+	status = usb_add_function(c, &midi->func);
+	if (status)
+		goto setup_fail;
+
+	return 0;
+
+setup_fail:
+	for (--i; i >= 0; i--)
+		kfree(midi->in_port[i]);
+	kfree(midi);
+fail:
+	return status;
+}
+
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index ae69ed7e6b99..aab8eded045b 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -13,15 +13,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 394502abeb96..e3f74bf5da2d 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 8f3eab1af885..349077033338 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
  */
 
 #include <linux/mm.h>
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3ea4666be3d0..704d1d94f72a 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -11,15 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index e18b4f520951..168906d2b5d4 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 3dc53754ab60..c1540648125a 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 7a8b9aa4aea5..2022fe492148 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index e18a6636c283..abf832935134 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #ifndef _F_UVC_H_
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 639e14a2fd15..3ac4f51cd0bb 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -69,8 +69,7 @@
  * each LUN would be settable independently as a disk drive or a CD-ROM
  * drive, but currently all LUNs have to be the same type.  The CD-ROM
  * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN.  Note also that the CD-ROM block
- * length is set to 512 rather than the more common value 2048.
+ * need be only one backing file per LUN.
  *
  * Requirements are modest; only a bulk-in and a bulk-out endpoint are
  * needed (an interrupt-out endpoint is also needed for CBI).  The memory
@@ -461,7 +460,6 @@ struct fsg_dev {
 
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
-	struct fsg_buffhd	buffhds[FSG_NUM_BUFFERS];
 
 	int			thread_wakeup_needed;
 	struct completion	thread_notifier;
@@ -488,6 +486,8 @@ struct fsg_dev {
 	unsigned int		nluns;
 	struct fsg_lun		*luns;
 	struct fsg_lun		*curlun;
+	/* Must be the last entry */
+	struct fsg_buffhd	buffhds[];
 };
 
 typedef void (*fsg_routine_t)(struct fsg_dev *);
@@ -586,7 +586,19 @@ dev_qualifier = {
 	.bNumConfigurations =	1,
 };
 
+static int populate_bos(struct fsg_dev *fsg, u8 *buf)
+{
+	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
+	buf += USB_DT_BOS_SIZE;
+
+	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
+	buf += USB_DT_USB_EXT_CAP_SIZE;
 
+	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
+
+	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
+		+ USB_DT_USB_EXT_CAP_SIZE;
+}
 
 /*
  * Config descriptors must agree with the code that sets configurations
@@ -935,7 +947,8 @@ static int standard_setup_req(struct fsg_dev *fsg,
 			break;
 		case USB_DT_DEVICE_QUALIFIER:
 			VDBG(fsg, "get device qualifier\n");
-			if (!gadget_is_dualspeed(fsg->gadget))
+			if (!gadget_is_dualspeed(fsg->gadget) ||
+					fsg->gadget->speed == USB_SPEED_SUPER)
 				break;
 			/*
 			 * Assume ep0 uses the same maxpacket value for both
@@ -948,7 +961,8 @@ static int standard_setup_req(struct fsg_dev *fsg,
 
 		case USB_DT_OTHER_SPEED_CONFIG:
 			VDBG(fsg, "get other-speed config descriptor\n");
-			if (!gadget_is_dualspeed(fsg->gadget))
+			if (!gadget_is_dualspeed(fsg->gadget) ||
+					fsg->gadget->speed == USB_SPEED_SUPER)
 				break;
 			goto get_config;
 		case USB_DT_CONFIG:
@@ -967,7 +981,15 @@ get_config:
 			value = usb_gadget_get_string(&fsg_stringtab,
 					w_value & 0xff, req->buf);
 			break;
+
+		case USB_DT_BOS:
+			VDBG(fsg, "get bos descriptor\n");
+
+			if (gadget_is_superspeed(fsg->gadget))
+				value = populate_bos(fsg, req->buf);
+			break;
 		}
+
 		break;
 
 	/* One config, two speeds */
@@ -1136,7 +1158,6 @@ static int do_read(struct fsg_dev *fsg)
 	u32			amount_left;
 	loff_t			file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nread;
 
 	/* Get the starting Logical Block Address and check that it's
@@ -1158,7 +1179,7 @@ static int do_read(struct fsg_dev *fsg)
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
-	file_offset = ((loff_t) lba) << 9;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Carry out the file reads */
 	amount_left = fsg->data_size_from_cmnd;
@@ -1171,17 +1192,10 @@ static int do_read(struct fsg_dev *fsg)
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
-		 * Finally, if we're not at a page boundary, don't read past
-		 *	the next page.
-		 * If this means reading 0 then we were asked to read past
-		 *	the end of file. */
+		 */
 		amount = min((unsigned int) amount_left, mod_data.buflen);
 		amount = min((loff_t) amount,
 				curlun->file_length - file_offset);
-		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
-		if (partial_page > 0)
-			amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
-					partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = fsg->next_buffhd_to_fill;
@@ -1196,7 +1210,7 @@ static int do_read(struct fsg_dev *fsg)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			bh->inreq->length = 0;
 			bh->state = BUF_STATE_FULL;
@@ -1221,18 +1235,23 @@ static int do_read(struct fsg_dev *fsg)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
 					(int) nread, amount);
-			nread -= (nread & 511);	// Round down to a block
+			nread = round_down(nread, curlun->blksize);
 		}
 		file_offset  += nread;
 		amount_left  -= nread;
 		fsg->residue -= nread;
+
+		/* Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
 		bh->inreq->length = nread;
 		bh->state = BUF_STATE_FULL;
 
 		/* If an error occurred, report it and its position */
 		if (nread < amount) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1262,7 +1281,6 @@ static int do_write(struct fsg_dev *fsg)
 	u32			amount_left_to_req, amount_left_to_write;
 	loff_t			usb_offset, file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nwritten;
 	int			rc;
 
@@ -1303,7 +1321,7 @@ static int do_write(struct fsg_dev *fsg)
 
 	/* Carry out the file writes */
 	get_some_more = 1;
-	file_offset = usb_offset = ((loff_t) lba) << 9;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
 	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
 
 	while (amount_left_to_write > 0) {
@@ -1313,38 +1331,20 @@ static int do_write(struct fsg_dev *fsg)
 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
 
 			/* Figure out how much we want to get:
-			 * Try to get the remaining amount.
-			 * But don't get more than the buffer size.
-			 * And don't try to go past the end of the file.
-			 * If we're not at a page boundary,
-			 *	don't go past the next page.
-			 * If this means getting 0, then we were asked
-			 *	to write past the end of file.
-			 * Finally, round down to a block boundary. */
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
+			 */
 			amount = min(amount_left_to_req, mod_data.buflen);
-			amount = min((loff_t) amount, curlun->file_length -
-					usb_offset);
-			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
-			if (partial_page > 0)
-				amount = min(amount,
-	(unsigned int) PAGE_CACHE_SIZE - partial_page);
-
-			if (amount == 0) {
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
 				get_some_more = 0;
 				curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-				curlun->sense_data_info = usb_offset >> 9;
+				curlun->sense_data_info = usb_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= (amount & 511);
-			if (amount == 0) {
-
-				/* Why were we were asked to transfer a
-				 * partial block? */
-				get_some_more = 0;
-				continue;
-			}
 
 			/* Get the next buffer */
 			usb_offset += amount;
@@ -1353,11 +1353,11 @@ static int do_write(struct fsg_dev *fsg)
 			if (amount_left_to_req == 0)
 				get_some_more = 0;
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
-			bh->outreq->length = bh->bulk_out_intended_length =
-					amount;
-			bh->outreq->short_not_ok = 1;
+			/* Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(fsg, bh, amount);
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -1376,7 +1376,7 @@ static int do_write(struct fsg_dev *fsg)
 			/* Did something go wrong with the transfer? */
 			if (bh->outreq->status != 0) {
 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info = file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
@@ -1390,6 +1390,16 @@ static int do_write(struct fsg_dev *fsg)
 				amount = curlun->file_length - file_offset;
 			}
 
+			/* Don't accept excess data.  The spec doesn't say
+			 * what to do in this case.  We'll ignore the error.
+			 */
+			amount = min(amount, bh->bulk_out_intended_length);
+
+			/* Don't write a partial block */
+			amount = round_down(amount, curlun->blksize);
+			if (amount == 0)
+				goto empty_write;
+
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
@@ -1408,8 +1418,7 @@ static int do_write(struct fsg_dev *fsg)
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
 						(int) nwritten, amount);
-				nwritten -= (nwritten & 511);
-						// Round down to a block
+				nwritten = round_down(nwritten, curlun->blksize);
 			}
 			file_offset += nwritten;
 			amount_left_to_write -= nwritten;
@@ -1418,13 +1427,14 @@ static int do_write(struct fsg_dev *fsg)
 			/* If an error occurred, report it and its position */
 			if (nwritten < amount) {
 				curlun->sense_data = SS_WRITE_ERROR;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info = file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
 
+ empty_write:
 			/* Did the host decide to stop early? */
-			if (bh->outreq->actual != bh->outreq->length) {
+			if (bh->outreq->actual < bh->bulk_out_intended_length) {
 				fsg->short_packet_received = 1;
 				break;
 			}
@@ -1500,8 +1510,8 @@ static int do_verify(struct fsg_dev *fsg)
 		return -EIO;		// No default reply
 
 	/* Prepare to carry out the file verify */
-	amount_left = verification_length << 9;
-	file_offset = ((loff_t) lba) << 9;
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Write out all the dirty buffers before invalidating them */
 	fsg_lun_fsync_sub(curlun);
@@ -1519,15 +1529,14 @@ static int do_verify(struct fsg_dev *fsg)
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
-		 * If this means reading 0 then we were asked to read
-		 * past the end of file. */
+		 */
 		amount = min((unsigned int) amount_left, mod_data.buflen);
 		amount = min((loff_t) amount,
 				curlun->file_length - file_offset);
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1550,11 +1559,11 @@ static int do_verify(struct fsg_dev *fsg)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
 					(int) nread, amount);
-			nread -= (nread & 511);	// Round down to a sector
+			nread = round_down(nread, curlun->blksize);
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1668,7 +1677,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
 						/* Max logical block */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
 	return 8;
 }
 
@@ -1890,7 +1899,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
 
 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
 						/* Number of blocks */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
 	buf[4] = 0x02;				/* Current capacity */
 	return 12;
 }
@@ -1969,7 +1978,7 @@ static int throw_away_data(struct fsg_dev *fsg)
 			fsg->next_buffhd_to_drain = bh->next;
 
 			/* A short packet or an error ends everything */
-			if (bh->outreq->actual != bh->outreq->length ||
+			if (bh->outreq->actual < bh->bulk_out_intended_length ||
 					bh->outreq->status != 0) {
 				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
 				return -EINTR;
@@ -1983,11 +1992,11 @@ static int throw_away_data(struct fsg_dev *fsg)
 			amount = min(fsg->usb_amount_left,
 					(u32) mod_data.buflen);
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
-			bh->outreq->length = bh->bulk_out_intended_length =
-					amount;
-			bh->outreq->short_not_ok = 1;
+			/* Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(fsg, bh, amount);
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -2415,7 +2424,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
 				(7<<1) | (1<<4), 1,
 				"READ(6)")) == 0)
@@ -2424,7 +2433,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_10:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << 9;
+				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"READ(10)")) == 0)
@@ -2433,7 +2442,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_12:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << 9;
+				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"READ(12)")) == 0)
@@ -2519,7 +2528,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
 				(7<<1) | (1<<4), 1,
 				"WRITE(6)")) == 0)
@@ -2528,7 +2537,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_10:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << 9;
+				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"WRITE(10)")) == 0)
@@ -2537,7 +2546,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_12:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << 9;
+				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"WRITE(12)")) == 0)
@@ -2666,7 +2675,6 @@ static int get_next_command(struct fsg_dev *fsg)
 
 		/* Queue a request to read a Bulk-only CBW */
 		set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
-		bh->outreq->short_not_ok = 1;
 		start_transfer(fsg, fsg->bulk_out, bh->outreq,
 				&bh->outreq_busy, &bh->state);
 
@@ -2752,7 +2760,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting)
 
 reset:
 	/* Deallocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd *bh = &fsg->buffhds[i];
 
 		if (bh->inreq) {
@@ -2791,29 +2799,32 @@ reset:
 
 	/* Enable the endpoints */
 	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
+			&fsg_ss_bulk_in_desc);
 	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
 		goto reset;
 	fsg->bulk_in_enabled = 1;
 
 	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
+			&fsg_ss_bulk_out_desc);
 	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
 		goto reset;
 	fsg->bulk_out_enabled = 1;
-	fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	if (transport_is_cbi()) {
 		d = fsg_ep_desc(fsg->gadget,
-				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc);
+				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
+				&fsg_ss_intr_in_desc);
 		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
 			goto reset;
 		fsg->intr_in_enabled = 1;
 	}
 
 	/* Allocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
 		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
@@ -2862,17 +2873,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config)
 		fsg->config = new_config;
 		if ((rc = do_set_interface(fsg, 0)) != 0)
 			fsg->config = 0;	// Reset on errors
-		else {
-			char *speed;
-
-			switch (fsg->gadget->speed) {
-			case USB_SPEED_LOW:	speed = "low";	break;
-			case USB_SPEED_FULL:	speed = "full";	break;
-			case USB_SPEED_HIGH:	speed = "high";	break;
-			default: 		speed = "?";	break;
-			}
-			INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
-		}
+		else
+			INFO(fsg, "%s config #%d\n",
+			     usb_speed_string(fsg->gadget->speed),
+			     fsg->config);
 	}
 	return rc;
 }
@@ -2909,7 +2913,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	/* Cancel all the pending transfers */
 	if (fsg->intreq_busy)
 		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &fsg->buffhds[i];
 		if (bh->inreq_busy)
 			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
@@ -2920,7 +2924,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	/* Wait until everything is idle */
 	for (;;) {
 		num_active = fsg->intreq_busy;
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			bh = &fsg->buffhds[i];
 			num_active += bh->inreq_busy + bh->outreq_busy;
 		}
@@ -2942,7 +2946,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	 * state, and the exception.  Then invoke the handler. */
 	spin_lock_irq(&fsg->lock);
 
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &fsg->buffhds[i];
 		bh->state = BUF_STATE_EMPTY;
 	}
@@ -3149,6 +3153,15 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 	DBG(fsg, "unbind\n");
 	clear_bit(REGISTERED, &fsg->atomic_bitflags);
 
+	/* If the thread isn't already dead, tell it to exit now */
+	if (fsg->state != FSG_STATE_TERMINATED) {
+		raise_exception(fsg, FSG_STATE_EXIT);
+		wait_for_completion(&fsg->thread_notifier);
+
+		/* The cleanup routine waits for this completion also */
+		complete(&fsg->thread_notifier);
+	}
+
 	/* Unregister the sysfs attribute files and the LUNs */
 	for (i = 0; i < fsg->nluns; ++i) {
 		curlun = &fsg->luns[i];
@@ -3162,17 +3175,8 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 		}
 	}
 
-	/* If the thread isn't already dead, tell it to exit now */
-	if (fsg->state != FSG_STATE_TERMINATED) {
-		raise_exception(fsg, FSG_STATE_EXIT);
-		wait_for_completion(&fsg->thread_notifier);
-
-		/* The cleanup routine waits for this completion also */
-		complete(&fsg->thread_notifier);
-	}
-
 	/* Free the data buffers */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i)
+	for (i = 0; i < fsg_num_buffers; ++i)
 		kfree(fsg->buffhds[i].buf);
 
 	/* Free the request and buffer for endpoint 0 */
@@ -3445,6 +3449,24 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			fsg_fs_intr_in_desc.bEndpointAddress;
 	}
 
+	if (gadget_is_superspeed(gadget)) {
+		unsigned		max_burst;
+
+		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+
+		/* Calculate bMaxBurst, we know packet size is 1024 */
+		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
+
+		/* Assume endpoint addresses are the same for both speeds */
+		fsg_ss_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+		fsg_ss_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+	}
+
 	if (gadget_is_otg(gadget))
 		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
 
@@ -3460,7 +3482,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	req->complete = ep0_complete;
 
 	/* Allocate the data buffers */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
 		/* Allocate for the bulk-in endpoint.  We assume that
@@ -3471,7 +3493,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			goto out;
 		bh->next = bh + 1;
 	}
-	fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0];
+	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
 
 	/* This should reflect the actual gadget power source */
 	usb_gadget_set_selfpowered(gadget);
@@ -3561,11 +3583,7 @@ static void fsg_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver		fsg_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	.speed		= USB_SPEED_HIGH,
-#else
-	.speed		= USB_SPEED_FULL,
-#endif
+	.speed		= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
 	.unbind		= fsg_unbind,
 	.disconnect	= fsg_disconnect,
@@ -3587,7 +3605,9 @@ static int __init fsg_alloc(void)
 {
 	struct fsg_dev		*fsg;
 
-	fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
+	fsg = kzalloc(sizeof *fsg +
+		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
+
 	if (!fsg)
 		return -ENOMEM;
 	spin_lock_init(&fsg->lock);
@@ -3605,6 +3625,10 @@ static int __init fsg_init(void)
 	int		rc;
 	struct fsg_dev	*fsg;
 
+	rc = fsg_num_buffers_validate();
+	if (rc != 0)
+		return rc;
+
 	if ((rc = fsg_alloc()) != 0)
 		return rc;
 	fsg = the_fsg;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 3bf872e1ad39..2a03e4de11c1 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc,
 	int reval = 0;
 	u16 max = 0;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* check the max package size validate for this endpoint */
 	/* Refer to USB2.0 spec table 9-13,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index de24a4233c25..b2c44e1d5813 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
@@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 	}
 }
 
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+	switch (speed & PORTSCX_PORT_SPEED_MASK) {
+	case PORTSCX_PORT_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case PORTSCX_PORT_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case PORTSCX_PORT_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
 /* Process a port change interrupt */
 static void port_change_irq(struct fsl_udc *udc)
 {
-	u32 speed;
-
 	if (udc->bus_reset)
 		udc->bus_reset = 0;
 
 	/* Bus resetting is finished */
-	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
 		/* Get the speed */
-		speed = (fsl_readl(&dr_regs->portsc1)
-				& PORTSCX_PORT_SPEED_MASK);
-		switch (speed) {
-		case PORTSCX_PORT_SPEED_HIGH:
-			udc->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case PORTSCX_PORT_SPEED_FULL:
-			udc->gadget.speed = USB_SPEED_FULL;
-			break;
-		case PORTSCX_PORT_SPEED_LOW:
-			udc->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-	}
+		udc->gadget.speed =
+			portscx_device_speed(fsl_readl(&dr_regs->portsc1));
 
 	/* Update USB state */
 	if (!udc->resume_state)
@@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 			default:
 				s = "None"; break;
 			}
-			s;} ), ( {
-			char *s;
-			switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
-			case PORTSCX_PORT_SPEED_FULL:
-				s = "Full Speed"; break;
-			case PORTSCX_PORT_SPEED_LOW:
-				s = "Low Speed"; break;
-			case PORTSCX_PORT_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Undefined"; break;
-			}
-			s;
-		} ),
+			s;} ),
+		usb_speed_string(portscx_device_speed(tmp_reg)),
 		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
 		"Normal PHY mode" : "Low power mode",
 		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 4ec888f90002..e593f2849fa9 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
@@ -220,7 +210,7 @@ static int config_ep(struct fusb300_ep *ep,
 
 	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
 
 	if ((info.type == USB_ENDPOINT_XFER_INT) ||
@@ -1479,7 +1469,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	fusb300->gadget.name = udc_name;
 	fusb300->reg = reg;
 
-	ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED,
 			  udc_name, fusb300);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
@@ -1487,7 +1477,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	}
 
 	ret = request_irq(ires1->start, fusb300_irq,
-			IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300);
+			IRQF_SHARED, udc_name, fusb300);
 	if (ret < 0) {
 		pr_err("request_irq1 error (%d)\n", ret);
 		goto clean_up;
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index f51aa2ef1f90..92745bd03064 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 704c2800ac00..0519d77915ec 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #define pr_fmt(fmt) "g_ffs: " fmt
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f3a83cd0ef50..a8855d0b7f3b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -31,6 +31,7 @@
 #define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
 #define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
+#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
 #define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
 #define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
@@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x30;
 	else if (gadget_is_net2272(gadget))
 		return 0x31;
+	else if (gadget_is_dwc3(gadget))
+		return 0x32;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 8b9220e128a7..8fcde37aa6d4 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -36,134 +36,43 @@
 
 #include "gadget_chips.h"
 
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
+#include "composite.c"
 #include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
+#include "f_midi.c"
 
 /*-------------------------------------------------------------------------*/
 
-
 MODULE_AUTHOR("Ben Williamson");
 MODULE_LICENSE("GPL v2");
 
-#define DRIVER_VERSION "25 Jul 2006"
-
 static const char shortname[] = "g_midi";
 static const char longname[] = "MIDI Gadget";
 
 static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-
-module_param(index, int, 0444);
+module_param(index, int, S_IRUGO);
 MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
-
-/* Some systems will want different product identifiers published in the
- * device descriptor, either numbers or strings or both.  These string
- * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, S_IRUGO);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
-
-/*
- * this version autoconfigures as much as possible,
- * which is reasonable for most "bulk-only" drivers.
- */
-static const char *EP_IN_NAME;
-static const char *EP_OUT_NAME;
 
+static char *id = SNDRV_DEFAULT_STR1;
+module_param(id, charp, S_IRUGO);
+MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 256
-
-
-/* This is a gadget, and the IN/OUT naming is from the host's perspective.
-   USB -> OUT endpoint -> rawmidi
-   USB <- IN endpoint  <- rawmidi */
-struct gmidi_in_port {
-	struct gmidi_device* dev;
-	int active;
-	uint8_t cable;		/* cable number << 4 */
-	uint8_t state;
-#define STATE_UNKNOWN	0
-#define STATE_1PARAM	1
-#define STATE_2PARAM_1	2
-#define STATE_2PARAM_2	3
-#define STATE_SYSEX_0	4
-#define STATE_SYSEX_1	5
-#define STATE_SYSEX_2	6
-	uint8_t data[2];
-};
-
-struct gmidi_device {
-	spinlock_t		lock;
-	struct usb_gadget	*gadget;
-	struct usb_request	*req;		/* for control responses */
-	u8			config;
-	struct usb_ep		*in_ep, *out_ep;
-	struct snd_card		*card;
-	struct snd_rawmidi	*rmidi;
-	struct snd_rawmidi_substream *in_substream;
-	struct snd_rawmidi_substream *out_substream;
-
-	/* For the moment we only support one port in
-	   each direction, but in_port is kept as a
-	   separate struct so we can have more later. */
-	struct gmidi_in_port	in_port;
-	unsigned long		out_triggered;
-	struct tasklet_struct	tasklet;
-};
-
-static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
-
-
-#define DBG(d, fmt, args...) \
-	dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) \
-	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) \
-	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) \
-	dev_info(&(d)->gadget->dev , fmt , ## args)
-
-
-static unsigned buflen = 256;
-static unsigned qlen = 32;
-
+static unsigned int buflen = 256;
 module_param(buflen, uint, S_IRUGO);
+MODULE_PARM_DESC(buflen, "MIDI buffer length");
+
+static unsigned int qlen = 32;
 module_param(qlen, uint, S_IRUGO);
+MODULE_PARM_DESC(qlen, "USB read request queue length");
 
+static unsigned int in_ports = 1;
+module_param(in_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(in_ports, "Number of MIDI input ports");
+
+static unsigned int out_ports = 1;
+module_param(out_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(out_ports, "Number of MIDI output ports");
 
 /* Thanks to Grey Innovation for donating this product ID.
  *
@@ -173,1149 +82,124 @@ module_param(qlen, uint, S_IRUGO);
 #define DRIVER_VENDOR_NUM	0x17b3		/* Grey Innovation */
 #define DRIVER_PRODUCT_NUM	0x0004		/* Linux-USB "MIDI Gadget" */
 
+/* string IDs are assigned dynamically */
 
-/*
- * DESCRIPTORS ... most are static, but strings and (full)
- * configuration descriptors are built on demand.
- */
-
-#define STRING_MANUFACTURER	25
-#define STRING_PRODUCT		42
-#define STRING_SERIAL		101
-#define STRING_MIDI_GADGET	250
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+#define STRING_DESCRIPTION_IDX		2
 
-/* We only have the one configuration, it's number 1. */
-#define	GMIDI_CONFIG		1
-
-/* We have two interfaces- AudioControl and MIDIStreaming */
-#define GMIDI_AC_INTERFACE	0
-#define GMIDI_MS_INTERFACE	1
-#define GMIDI_NUM_INTERFACES	2
-
-DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
-DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
-DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
-
-/* B.1  Device Descriptor */
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	.bcdUSB =		__constant_cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
-	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
-	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
-	.iManufacturer =	STRING_MANUFACTURER,
-	.iProduct =		STRING_PRODUCT,
+	.idVendor =		__constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		__constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+	/* .iManufacturer =	DYNAMIC */
+	/* .iProduct =		DYNAMIC */
 	.bNumConfigurations =	1,
 };
 
-/* B.2  Configuration Descriptor */
-static struct usb_config_descriptor config_desc = {
-	.bLength =		USB_DT_CONFIG_SIZE,
-	.bDescriptorType =	USB_DT_CONFIG,
-	/* compute wTotalLength on the fly */
-	.bNumInterfaces =	GMIDI_NUM_INTERFACES,
-	.bConfigurationValue =	GMIDI_CONFIG,
-	.iConfiguration =	STRING_MIDI_GADGET,
-	/*
-	 * FIXME: When embedding this driver in a device,
-	 * these need to be set to reflect the actual
-	 * power properties of the device. Is it selfpowered?
-	 */
-	.bmAttributes =		USB_CONFIG_ATT_ONE,
-	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
-/* B.3.1  Standard AC Interface Descriptor */
-static const struct usb_interface_descriptor ac_interface_desc = {
-	.bLength =		USB_DT_INTERFACE_SIZE,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	GMIDI_AC_INTERFACE,
-	.bNumEndpoints =	0,
-	.bInterfaceClass =	USB_CLASS_AUDIO,
-	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
-	.iInterface =		STRING_MIDI_GADGET,
-};
-
-/* B.3.2  Class-Specific AC Interface Descriptor */
-static const struct uac1_ac_header_descriptor_1 ac_header_desc = {
-	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdADC =		cpu_to_le16(0x0100),
-	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
-	.bInCollection =	1,
-	.baInterfaceNr = {
-		[0] =		GMIDI_MS_INTERFACE,
-	}
-};
-
-/* B.4.1  Standard MS Interface Descriptor */
-static const struct usb_interface_descriptor ms_interface_desc = {
-	.bLength =		USB_DT_INTERFACE_SIZE,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	GMIDI_MS_INTERFACE,
-	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_AUDIO,
-	.bInterfaceSubClass =	USB_SUBCLASS_MIDISTREAMING,
-	.iInterface =		STRING_MIDI_GADGET,
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s	= "Grey Innovation",
+	[STRING_PRODUCT_IDX].s		= "MIDI Gadget",
+	[STRING_DESCRIPTION_IDX].s	= "MIDI",
+	{  } /* end of list */
 };
 
-/* B.4.2  Class-Specific MS Interface Descriptor */
-static const struct usb_ms_header_descriptor ms_header_desc = {
-	.bLength =		USB_DT_MS_HEADER_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdMSC =		cpu_to_le16(0x0100),
-	.wTotalLength =		cpu_to_le16(USB_DT_MS_HEADER_SIZE
-				+ 2*USB_DT_MIDI_IN_SIZE
-				+ 2*USB_DT_MIDI_OUT_SIZE(1)),
-};
-
-#define JACK_IN_EMB	1
-#define JACK_IN_EXT	2
-#define JACK_OUT_EMB	3
-#define JACK_OUT_EXT	4
-
-/* B.4.3  MIDI IN Jack Descriptors */
-static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
-	.bLength =		USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_IN_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	.bJackID =		JACK_IN_EMB,
-};
-
-static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = {
-	.bLength =		USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_IN_JACK,
-	.bJackType =		USB_MS_EXTERNAL,
-	.bJackID =		JACK_IN_EXT,
-};
-
-/* B.4.4  MIDI OUT Jack Descriptors */
-static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = {
-	.bLength =		USB_DT_MIDI_OUT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	.bJackID =		JACK_OUT_EMB,
-	.bNrInputPins =		1,
-	.pins = {
-		[0] = {
-			.baSourceID =	JACK_IN_EXT,
-			.baSourcePin =	1,
-		}
-	}
-};
-
-static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = {
-	.bLength =		USB_DT_MIDI_OUT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EXTERNAL,
-	.bJackID =		JACK_OUT_EXT,
-	.bNrInputPins =		1,
-	.pins = {
-		[0] = {
-			.baSourceID =	JACK_IN_EMB,
-			.baSourcePin =	1,
-		}
-	}
-};
-
-/* B.5.1  Standard Bulk OUT Endpoint Descriptor */
-static struct usb_endpoint_descriptor bulk_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-};
-
-/* B.5.2  Class-specific MS Bulk OUT Endpoint Descriptor */
-static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = {
-	.bLength =		USB_DT_MS_ENDPOINT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_ENDPOINT,
-	.bDescriptorSubtype =	USB_MS_GENERAL,
-	.bNumEmbMIDIJack =	1,
-	.baAssocJackID = {
-		[0] =		JACK_IN_EMB,
-	}
-};
-
-/* B.6.1  Standard Bulk IN Endpoint Descriptor */
-static struct usb_endpoint_descriptor bulk_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-};
-
-/* B.6.2  Class-specific MS Bulk IN Endpoint Descriptor */
-static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = {
-	.bLength =		USB_DT_MS_ENDPOINT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_ENDPOINT,
-	.bDescriptorSubtype =	USB_MS_GENERAL,
-	.bNumEmbMIDIJack =	1,
-	.baAssocJackID = {
-		[0] =		JACK_OUT_EMB,
-	}
-};
-
-static const struct usb_descriptor_header *gmidi_function [] = {
-	(struct usb_descriptor_header *)&ac_interface_desc,
-	(struct usb_descriptor_header *)&ac_header_desc,
-	(struct usb_descriptor_header *)&ms_interface_desc,
-
-	(struct usb_descriptor_header *)&ms_header_desc,
-	(struct usb_descriptor_header *)&jack_in_emb_desc,
-	(struct usb_descriptor_header *)&jack_in_ext_desc,
-	(struct usb_descriptor_header *)&jack_out_emb_desc,
-	(struct usb_descriptor_header *)&jack_out_ext_desc,
-	/* If you add more jacks, update ms_header_desc.wTotalLength */
-
-	(struct usb_descriptor_header *)&bulk_out_desc,
-	(struct usb_descriptor_header *)&ms_out_desc,
-	(struct usb_descriptor_header *)&bulk_in_desc,
-	(struct usb_descriptor_header *)&ms_in_desc,
-	NULL,
-};
-
-static char manufacturer[50];
-static char product_desc[40] = "MIDI Gadget";
-static char serial_number[20];
-
-/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
-	{ STRING_MANUFACTURER, manufacturer, },
-	{ STRING_PRODUCT, product_desc, },
-	{ STRING_SERIAL, serial_number, },
-	{ STRING_MIDI_GADGET, longname, },
-	{  }			/* end of list */
-};
-
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab_dev = {
 	.language	= 0x0409,	/* en-us */
-	.strings	= strings,
+	.strings	= strings_dev,
 };
 
-static int config_buf(struct usb_gadget *gadget,
-		u8 *buf, u8 type, unsigned index)
-{
-	int len;
-
-	/* only one configuration */
-	if (index != 0) {
-		return -EINVAL;
-	}
-	len = usb_gadget_config_buf(&config_desc,
-			buf, USB_BUFSIZ, gmidi_function);
-	if (len < 0) {
-		return len;
-	}
-	((struct usb_config_descriptor *)buf)->bDescriptorType = type;
-	return len;
-}
-
-static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
-{
-	struct usb_request	*req;
-
-	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (req) {
-		req->length = length;
-		req->buf = kmalloc(length, GFP_ATOMIC);
-		if (!req->buf) {
-			usb_ep_free_request(ep, req);
-			req = NULL;
-		}
-	}
-	return req;
-}
-
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
-static const uint8_t gmidi_cin_length[] = {
-	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
 };
 
-/*
- * Receives a chunk of MIDI data.
- */
-static void gmidi_read_data(struct usb_ep *ep, int cable,
-				   uint8_t *data, int length)
-{
-	struct gmidi_device *dev = ep->driver_data;
-	/* cable is ignored, because for now we only have one. */
-
-	if (!dev->out_substream) {
-		/* Nobody is listening - throw it on the floor. */
-		return;
-	}
-	if (!test_bit(dev->out_substream->number, &dev->out_triggered)) {
-		return;
-	}
-	snd_rawmidi_receive(dev->out_substream, data, length);
-}
-
-static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
-{
-	unsigned i;
-	u8 *buf = req->buf;
-
-	for (i = 0; i + 3 < req->actual; i += 4) {
-		if (buf[i] != 0) {
-			int cable = buf[i] >> 4;
-			int length = gmidi_cin_length[buf[i] & 0x0f];
-			gmidi_read_data(ep, cable, &buf[i + 1], length);
-		}
-	}
-}
-
-static void gmidi_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct gmidi_device *dev = ep->driver_data;
-	int status = req->status;
-
-	switch (status) {
-	case 0:				/* normal completion */
-		if (ep == dev->out_ep) {
-			/* we received stuff.
-			   req is queued again, below */
-			gmidi_handle_out_data(ep, req);
-		} else if (ep == dev->in_ep) {
-			/* our transmit completed.
-			   see if there's more to go.
-			   gmidi_transmit eats req, don't queue it again. */
-			gmidi_transmit(dev, req);
-			return;
-		}
-		break;
-
-	/* this endpoint is normally active while we're configured */
-	case -ECONNABORTED:		/* hardware forced ep reset */
-	case -ECONNRESET:		/* request dequeued */
-	case -ESHUTDOWN:		/* disconnect from host */
-		VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
-				req->actual, req->length);
-		if (ep == dev->out_ep) {
-			gmidi_handle_out_data(ep, req);
-		}
-		free_ep_req(ep, req);
-		return;
-
-	case -EOVERFLOW:		/* buffer overrun on read means that
-					 * we didn't provide a big enough
-					 * buffer.
-					 */
-	default:
-		DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
-				status, req->actual, req->length);
-		break;
-	case -EREMOTEIO:		/* short read */
-		break;
-	}
-
-	status = usb_ep_queue(ep, req, GFP_ATOMIC);
-	if (status) {
-		ERROR(dev, "kill %s:  resubmit %d bytes --> %d\n",
-				ep->name, req->length, status);
-		usb_ep_set_halt(ep);
-		/* FIXME recover later ... somehow */
-	}
-}
-
-static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
-{
-	int err = 0;
-	struct usb_request *req;
-	struct usb_ep *ep;
-	unsigned i;
-
-	dev->in_ep->desc = &bulk_in_desc;
-	err = usb_ep_enable(dev->in_ep);
-	if (err) {
-		ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err);
-		goto fail;
-	}
-	dev->in_ep->driver_data = dev;
-
-	dev->out_ep->desc = &bulk_out_desc;
-	err = usb_ep_enable(dev->out_ep);
-	if (err) {
-		ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err);
-		goto fail;
-	}
-	dev->out_ep->driver_data = dev;
-
-	/* allocate a bunch of read buffers and queue them all at once. */
-	ep = dev->out_ep;
-	for (i = 0; i < qlen && err == 0; i++) {
-		req = alloc_ep_req(ep, buflen);
-		if (req) {
-			req->complete = gmidi_complete;
-			err = usb_ep_queue(ep, req, GFP_ATOMIC);
-			if (err) {
-				DBG(dev, "%s queue req: %d\n", ep->name, err);
-			}
-		} else {
-			err = -ENOMEM;
-		}
-	}
-fail:
-	/* caller is responsible for cleanup on error */
-	return err;
-}
-
-
-static void gmidi_reset_config(struct gmidi_device *dev)
-{
-	if (dev->config == 0) {
-		return;
-	}
-
-	DBG(dev, "reset config\n");
-
-	/* just disable endpoints, forcing completion of pending i/o.
-	 * all our completion handlers free their requests in this case.
-	 */
-	usb_ep_disable(dev->in_ep);
-	usb_ep_disable(dev->out_ep);
-	dev->config = 0;
-}
-
-/* change our operational config.  this code must agree with the code
- * that returns config descriptors, and altsetting code.
- *
- * it's also responsible for power management interactions. some
- * configurations might not work with our current power sources.
- *
- * note that some device controller hardware will constrain what this
- * code can do, perhaps by disallowing more than one configuration or
- * by limiting configuration choices (like the pxa2xx).
- */
-static int
-gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
-{
-	int result = 0;
-	struct usb_gadget *gadget = dev->gadget;
-
-#if 0
-	/* FIXME */
-	/* Hacking this bit out fixes a bug where on receipt of two
-	   USB_REQ_SET_CONFIGURATION messages, we end up with no
-	   buffered OUT requests waiting for data. This is clearly
-	   hiding a bug elsewhere, because if the config didn't
-	   change then we really shouldn't do anything. */
-	/* Having said that, when we do "change" from config 1
-	   to config 1, we at least gmidi_reset_config() which
-	   clears out any requests on endpoints, so it's not like
-	   we leak or anything. */
-	if (number == dev->config) {
-		return 0;
-	}
-#endif
-
-	gmidi_reset_config(dev);
-
-	switch (number) {
-	case GMIDI_CONFIG:
-		result = set_gmidi_config(dev, gfp_flags);
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	case 0:
-		return result;
-	}
-
-	if (!result && (!dev->in_ep || !dev->out_ep)) {
-		result = -ENODEV;
-	}
-	if (result) {
-		gmidi_reset_config(dev);
-	} else {
-		char *speed;
-
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:	speed = "low"; break;
-		case USB_SPEED_FULL:	speed = "full"; break;
-		case USB_SPEED_HIGH:	speed = "high"; break;
-		default:		speed = "?"; break;
-		}
-
-		dev->config = number;
-		INFO(dev, "%s speed\n", speed);
-	}
-	return result;
-}
-
-
-static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	if (req->status || req->actual != req->length) {
-		DBG((struct gmidi_device *) ep->driver_data,
-				"setup complete --> %d, %d/%d\n",
-				req->status, req->actual, req->length);
-	}
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's
- * not handled lower down, in hardware or the hardware driver (like
- * device and endpoint feature flags, and their status).  It's all
- * housekeeping for the gadget function we're implementing.  Most of
- * the work is in config-specific setup.
- */
-static int gmidi_setup(struct usb_gadget *gadget,
-			const struct usb_ctrlrequest *ctrl)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	struct usb_request *req = dev->req;
-	int value = -EOPNOTSUPP;
-	u16 w_index = le16_to_cpu(ctrl->wIndex);
-	u16 w_value = le16_to_cpu(ctrl->wValue);
-	u16 w_length = le16_to_cpu(ctrl->wLength);
-
-	/* usually this stores reply data in the pre-allocated ep0 buffer,
-	 * but config change events will reconfigure hardware.
-	 */
-	req->zero = 0;
-	switch (ctrl->bRequest) {
-
-	case USB_REQ_GET_DESCRIPTOR:
-		if (ctrl->bRequestType != USB_DIR_IN) {
-			goto unknown;
-		}
-		switch (w_value >> 8) {
-
-		case USB_DT_DEVICE:
-			device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-			value = min(w_length, (u16) sizeof(device_desc));
-			memcpy(req->buf, &device_desc, value);
-			break;
-		case USB_DT_CONFIG:
-			value = config_buf(gadget, req->buf,
-					w_value >> 8,
-					w_value & 0xff);
-			if (value >= 0) {
-				value = min(w_length, (u16)value);
-			}
-			break;
-
-		case USB_DT_STRING:
-			/* wIndex == language code.
-			 * this driver only handles one language, you can
-			 * add string tables for other languages, using
-			 * any UTF-8 characters
-			 */
-			value = usb_gadget_get_string(&stringtab,
-					w_value & 0xff, req->buf);
-			if (value >= 0) {
-				value = min(w_length, (u16)value);
-			}
-			break;
-		}
-		break;
-
-	/* currently two configs, two speeds */
-	case USB_REQ_SET_CONFIGURATION:
-		if (ctrl->bRequestType != 0) {
-			goto unknown;
-		}
-		if (gadget->a_hnp_support) {
-			DBG(dev, "HNP available\n");
-		} else if (gadget->a_alt_hnp_support) {
-			DBG(dev, "HNP needs a different root port\n");
-		} else {
-			VDBG(dev, "HNP inactive\n");
-		}
-		spin_lock(&dev->lock);
-		value = gmidi_set_config(dev, w_value, GFP_ATOMIC);
-		spin_unlock(&dev->lock);
-		break;
-	case USB_REQ_GET_CONFIGURATION:
-		if (ctrl->bRequestType != USB_DIR_IN) {
-			goto unknown;
-		}
-		*(u8 *)req->buf = dev->config;
-		value = min(w_length, (u16)1);
-		break;
-
-	/* until we add altsetting support, or other interfaces,
-	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
-	 * and already killed pending endpoint I/O.
-	 */
-	case USB_REQ_SET_INTERFACE:
-		if (ctrl->bRequestType != USB_RECIP_INTERFACE) {
-			goto unknown;
-		}
-		spin_lock(&dev->lock);
-		if (dev->config && w_index < GMIDI_NUM_INTERFACES
-			&& w_value == 0)
-		{
-			u8 config = dev->config;
-
-			/* resets interface configuration, forgets about
-			 * previous transaction state (queued bufs, etc)
-			 * and re-inits endpoint state (toggle etc)
-			 * no response queued, just zero status == success.
-			 * if we had more than one interface we couldn't
-			 * use this "reset the config" shortcut.
-			 */
-			gmidi_reset_config(dev);
-			gmidi_set_config(dev, config, GFP_ATOMIC);
-			value = 0;
-		}
-		spin_unlock(&dev->lock);
-		break;
-	case USB_REQ_GET_INTERFACE:
-		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) {
-			goto unknown;
-		}
-		if (!dev->config) {
-			break;
-		}
-		if (w_index >= GMIDI_NUM_INTERFACES) {
-			value = -EDOM;
-			break;
-		}
-		*(u8 *)req->buf = 0;
-		value = min(w_length, (u16)1);
-		break;
-
-	default:
-unknown:
-		VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			w_value, w_index, w_length);
-	}
-
-	/* respond with data transfer before status phase? */
-	if (value >= 0) {
-		req->length = value;
-		req->zero = value < w_length;
-		value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
-		if (value < 0) {
-			DBG(dev, "ep_queue --> %d\n", value);
-			req->status = 0;
-			gmidi_setup_complete(gadget->ep0, req);
-		}
-	}
-
-	/* device either stalls (value < 0) or reports success */
-	return value;
-}
-
-static void gmidi_disconnect(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	gmidi_reset_config(dev);
-
-	/* a more significant application might have some non-usb
-	 * activities to quiesce here, saving resources like power
-	 * or pushing the notification up a network stack.
-	 */
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	/* next we may get setup() calls to enumerate new connections;
-	 * or an unbind() during shutdown (including removing module).
-	 */
-}
-
-static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	struct snd_card *card;
-
-	DBG(dev, "unbind\n");
-
-	card = dev->card;
-	dev->card = NULL;
-	if (card) {
-		snd_card_free(card);
-	}
-
-	/* we've already been disconnected ... no i/o is active */
-	if (dev->req) {
-		dev->req->length = USB_BUFSIZ;
-		free_ep_req(gadget->ep0, dev->req);
-	}
-	kfree(dev);
-	set_gadget_data(gadget, NULL);
-}
-
-static int gmidi_snd_free(struct snd_device *device)
+static int __exit midi_unbind(struct usb_composite_dev *dev)
 {
 	return 0;
 }
 
-static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0,
-					uint8_t p1, uint8_t p2, uint8_t p3)
-{
-	unsigned length = req->length;
-	u8 *buf = (u8 *)req->buf + length;
-
-	buf[0] = p0;
-	buf[1] = p1;
-	buf[2] = p2;
-	buf[3] = p3;
-	req->length = length + 4;
-}
-
-/*
- * Converts MIDI commands to USB MIDI packets.
- */
-static void gmidi_transmit_byte(struct usb_request *req,
-				struct gmidi_in_port *port, uint8_t b)
-{
-	uint8_t p0 = port->cable;
-
-	if (b >= 0xf8) {
-		gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
-	} else if (b >= 0xf0) {
-		switch (b) {
-		case 0xf0:
-			port->data[0] = b;
-			port->state = STATE_SYSEX_1;
-			break;
-		case 0xf1:
-		case 0xf3:
-			port->data[0] = b;
-			port->state = STATE_1PARAM;
-			break;
-		case 0xf2:
-			port->data[0] = b;
-			port->state = STATE_2PARAM_1;
-			break;
-		case 0xf4:
-		case 0xf5:
-			port->state = STATE_UNKNOWN;
-			break;
-		case 0xf6:
-			gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
-			port->state = STATE_UNKNOWN;
-			break;
-		case 0xf7:
-			switch (port->state) {
-			case STATE_SYSEX_0:
-				gmidi_transmit_packet(req,
-					p0 | 0x05, 0xf7, 0, 0);
-				break;
-			case STATE_SYSEX_1:
-				gmidi_transmit_packet(req,
-					p0 | 0x06, port->data[0], 0xf7, 0);
-				break;
-			case STATE_SYSEX_2:
-				gmidi_transmit_packet(req,
-					p0 | 0x07, port->data[0],
-					port->data[1], 0xf7);
-				break;
-			}
-			port->state = STATE_UNKNOWN;
-			break;
-		}
-	} else if (b >= 0x80) {
-		port->data[0] = b;
-		if (b >= 0xc0 && b <= 0xdf)
-			port->state = STATE_1PARAM;
-		else
-			port->state = STATE_2PARAM_1;
-	} else { /* b < 0x80 */
-		switch (port->state) {
-		case STATE_1PARAM:
-			if (port->data[0] < 0xf0) {
-				p0 |= port->data[0] >> 4;
-			} else {
-				p0 |= 0x02;
-				port->state = STATE_UNKNOWN;
-			}
-			gmidi_transmit_packet(req, p0, port->data[0], b, 0);
-			break;
-		case STATE_2PARAM_1:
-			port->data[1] = b;
-			port->state = STATE_2PARAM_2;
-			break;
-		case STATE_2PARAM_2:
-			if (port->data[0] < 0xf0) {
-				p0 |= port->data[0] >> 4;
-				port->state = STATE_2PARAM_1;
-			} else {
-				p0 |= 0x03;
-				port->state = STATE_UNKNOWN;
-			}
-			gmidi_transmit_packet(req,
-				p0, port->data[0], port->data[1], b);
-			break;
-		case STATE_SYSEX_0:
-			port->data[0] = b;
-			port->state = STATE_SYSEX_1;
-			break;
-		case STATE_SYSEX_1:
-			port->data[1] = b;
-			port->state = STATE_SYSEX_2;
-			break;
-		case STATE_SYSEX_2:
-			gmidi_transmit_packet(req,
-				p0 | 0x04, port->data[0], port->data[1], b);
-			port->state = STATE_SYSEX_0;
-			break;
-		}
-	}
-}
-
-static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req)
-{
-	struct usb_ep *ep = dev->in_ep;
-	struct gmidi_in_port *port = &dev->in_port;
-
-	if (!ep) {
-		return;
-	}
-	if (!req) {
-		req = alloc_ep_req(ep, buflen);
-	}
-	if (!req) {
-		ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n");
-		return;
-	}
-	req->length = 0;
-	req->complete = gmidi_complete;
-
-	if (port->active) {
-		while (req->length + 3 < buflen) {
-			uint8_t b;
-			if (snd_rawmidi_transmit(dev->in_substream, &b, 1)
-				!= 1)
-			{
-				port->active = 0;
-				break;
-			}
-			gmidi_transmit_byte(req, port, b);
-		}
-	}
-	if (req->length > 0) {
-		usb_ep_queue(ep, req, GFP_ATOMIC);
-	} else {
-		free_ep_req(ep, req);
-	}
-}
-
-static void gmidi_in_tasklet(unsigned long data)
-{
-	struct gmidi_device *dev = (struct gmidi_device *)data;
-
-	gmidi_transmit(dev, NULL);
-}
-
-static int gmidi_in_open(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_open\n");
-	dev->in_substream = substream;
-	dev->in_port.state = STATE_UNKNOWN;
-	return 0;
-}
-
-static int gmidi_in_close(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_close\n");
-	return 0;
-}
-
-static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_trigger %d\n", up);
-	dev->in_port.active = up;
-	if (up) {
-		tasklet_hi_schedule(&dev->tasklet);
-	}
-}
-
-static int gmidi_out_open(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_open\n");
-	dev->out_substream = substream;
-	return 0;
-}
-
-static int gmidi_out_close(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_close\n");
-	return 0;
-}
-
-static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_trigger %d\n", up);
-	if (up) {
-		set_bit(substream->number, &dev->out_triggered);
-	} else {
-		clear_bit(substream->number, &dev->out_triggered);
-	}
-}
-
-static struct snd_rawmidi_ops gmidi_in_ops = {
-	.open = gmidi_in_open,
-	.close = gmidi_in_close,
-	.trigger = gmidi_in_trigger,
+static struct usb_configuration midi_config = {
+	.label		= "MIDI Gadget",
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.bMaxPower	= CONFIG_USB_GADGET_VBUS_DRAW / 2,
 };
 
-static struct snd_rawmidi_ops gmidi_out_ops = {
-	.open = gmidi_out_open,
-	.close = gmidi_out_close,
-	.trigger = gmidi_out_trigger
-};
-
-/* register as a sound "card" */
-static int gmidi_register_card(struct gmidi_device *dev)
+static int __init midi_bind_config(struct usb_configuration *c)
 {
-	struct snd_card *card;
-	struct snd_rawmidi *rmidi;
-	int err;
-	int out_ports = 1;
-	int in_ports = 1;
-	static struct snd_device_ops ops = {
-		.dev_free = gmidi_snd_free,
-	};
-
-	err = snd_card_create(index, id, THIS_MODULE, 0, &card);
-	if (err < 0) {
-		ERROR(dev, "snd_card_create failed\n");
-		goto fail;
-	}
-	dev->card = card;
-
-	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops);
-	if (err < 0) {
-		ERROR(dev, "snd_device_new failed: error %d\n", err);
-		goto fail;
-	}
-
-	strcpy(card->driver, longname);
-	strcpy(card->longname, longname);
-	strcpy(card->shortname, shortname);
-
-	/* Set up rawmidi */
-	dev->in_port.dev = dev;
-	dev->in_port.active = 0;
-	snd_component_add(card, "MIDI");
-	err = snd_rawmidi_new(card, "USB MIDI Gadget", 0,
-			      out_ports, in_ports, &rmidi);
-	if (err < 0) {
-		ERROR(dev, "snd_rawmidi_new failed: error %d\n", err);
-		goto fail;
-	}
-	dev->rmidi = rmidi;
-	strcpy(rmidi->name, card->shortname);
-	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
-			    SNDRV_RAWMIDI_INFO_INPUT |
-			    SNDRV_RAWMIDI_INFO_DUPLEX;
-	rmidi->private_data = dev;
-
-	/* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
-	   It's an upside-down world being a gadget. */
-	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
-	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
-
-	snd_card_set_dev(card, &dev->gadget->dev);
-
-	/* register it - we're ready to go */
-	err = snd_card_register(card);
-	if (err < 0) {
-		ERROR(dev, "snd_card_register failed\n");
-		goto fail;
-	}
-
-	VDBG(dev, "gmidi_register_card finished ok\n");
-	return 0;
-
-fail:
-	if (dev->card) {
-		snd_card_free(dev->card);
-		dev->card = NULL;
-	}
-	return err;
+	return f_midi_bind_config(c, index, id,
+				  in_ports, out_ports,
+				  buflen, qlen);
 }
 
-/*
- * Creates an output endpoint, and initializes output ports.
- */
-static int __init gmidi_bind(struct usb_gadget *gadget)
+static int __init midi_bind(struct usb_composite_dev *cdev)
 {
-	struct gmidi_device *dev;
-	struct usb_ep *in_ep, *out_ep;
-	int gcnum, err = 0;
+	struct usb_gadget *gadget = cdev->gadget;
+	int gcnum, status;
 
-	/* support optional vendor/distro customization */
-	if (idVendor) {
-		if (!idProduct) {
-			pr_err("idVendor needs idProduct!\n");
-			return -ENODEV;
-		}
-		device_desc.idVendor = cpu_to_le16(idVendor);
-		device_desc.idProduct = cpu_to_le16(idProduct);
-		if (bcdDevice) {
-			device_desc.bcdDevice = cpu_to_le16(bcdDevice);
-		}
-	}
-	if (iManufacturer) {
-		strlcpy(manufacturer, iManufacturer, sizeof(manufacturer));
-	} else {
-		snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
-			init_utsname()->sysname, init_utsname()->release,
-			gadget->name);
-	}
-	if (iProduct) {
-		strlcpy(product_desc, iProduct, sizeof(product_desc));
-	}
-	if (iSerialNumber) {
-		device_desc.iSerialNumber = STRING_SERIAL,
-		strlcpy(serial_number, iSerialNumber, sizeof(serial_number));
-	}
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
 
-	/* Bulk-only drivers like this one SHOULD be able to
-	 * autoconfigure on any sane usb controller driver,
-	 * but there may also be important quirks to address.
-	 */
-	usb_ep_autoconfig_reset(gadget);
-	in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		pr_err("%s: can't autoconfigure on %s\n",
-			shortname, gadget->name);
-		return -ENODEV;
-	}
-	EP_IN_NAME = in_ep->name;
-	in_ep->driver_data = in_ep;	/* claim */
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
 
-	out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc);
-	if (!out_ep) {
-		goto autoconf_fail;
-	}
-	EP_OUT_NAME = out_ep->name;
-	out_ep->driver_data = out_ep;	/* claim */
+	/* config description */
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_DESCRIPTION_IDX].id = status;
+
+	midi_config.iConfiguration = status;
 
 	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	} else {
+	if (gcnum < 0) {
 		/* gmidi is so simple (no altsettings) that
 		 * it SHOULD NOT have problems with bulk-capable hardware.
 		 * so warn about unrecognized controllers, don't panic.
 		 */
 		pr_warning("%s: controller '%s' not recognized\n",
-			shortname, gadget->name);
+			   __func__, gadget->name);
 		device_desc.bcdDevice = cpu_to_le16(0x9999);
+	} else {
+		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
 	}
 
+	status = usb_add_config(cdev, &midi_config, midi_bind_config);
+	if (status < 0)
+		return status;
 
-	/* ok, we made sense of the hardware ... */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
-		return -ENOMEM;
-	}
-	spin_lock_init(&dev->lock);
-	dev->gadget = gadget;
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-	set_gadget_data(gadget, dev);
-	tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev);
-
-	/* preallocate control response and buffer */
-	dev->req = alloc_ep_req(gadget->ep0, USB_BUFSIZ);
-	if (!dev->req) {
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	dev->req->complete = gmidi_setup_complete;
-
-	gadget->ep0->driver_data = dev;
-
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
-	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
-		EP_OUT_NAME, EP_IN_NAME);
-
-	/* register as an ALSA sound card */
-	err = gmidi_register_card(dev);
-	if (err < 0) {
-		goto fail;
-	}
-
-	VDBG(dev, "gmidi_bind finished ok\n");
+	pr_info("%s\n", longname);
 	return 0;
-
-fail:
-	gmidi_unbind(gadget);
-	return err;
-}
-
-
-static void gmidi_suspend(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-
-	if (gadget->speed == USB_SPEED_UNKNOWN) {
-		return;
-	}
-
-	DBG(dev, "suspend\n");
-}
-
-static void gmidi_resume(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-
-	DBG(dev, "resume\n");
 }
 
-
-static struct usb_gadget_driver gmidi_driver = {
-	.speed		= USB_SPEED_FULL,
-	.function	= (char *)longname,
-	.unbind		= gmidi_unbind,
-
-	.setup		= gmidi_setup,
-	.disconnect	= gmidi_disconnect,
-
-	.suspend	= gmidi_suspend,
-	.resume		= gmidi_resume,
-
-	.driver		= {
-		.name		= (char *)shortname,
-		.owner		= THIS_MODULE,
-	},
+static struct usb_composite_driver midi_driver = {
+	.name		= (char *) longname,
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.unbind		= __exit_p(midi_unbind),
 };
 
-static int __init gmidi_init(void)
+static int __init midi_init(void)
 {
-	return usb_gadget_probe_driver(&gmidi_driver, gmidi_bind);
+	return usb_composite_probe(&midi_driver, midi_bind);
 }
-module_init(gmidi_init);
+module_init(midi_init);
 
-static void __exit gmidi_cleanup(void)
+static void __exit midi_cleanup(void)
 {
-	usb_gadget_unregister_driver(&gmidi_driver);
+	usb_composite_unregister(&midi_driver);
 }
-module_exit(gmidi_cleanup);
+module_exit(midi_cleanup);
 
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 9fb575034a0e..f888c3ede860 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 692fd9b2248b..2d978c0e7ced 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep,
 		return -EINVAL;
 	}
 
-	if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (imx_ep->fifosize < usb_endpoint_maxp(desc)) {
 		D_ERR(imx_usb->dev,
 			"<%s> bad %s maxpacket\n", __func__, usb_ep->name);
 		return -ERANGE;
@@ -1478,7 +1478,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++) {
 		ret = request_irq(imx_usb->usbd_int[i], intr_handler(i),
-				     IRQF_DISABLED, driver_name, imx_usb);
+				     0, driver_name, imx_usb);
 		if (ret) {
 			dev_err(&pdev->dev, "can't get irq %i, err %d\n",
 				imx_usb->usbd_int[i], ret);
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index 7136c242b4ec..d118fb777840 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -8,11 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
  */
 
 #ifndef __LINUX_USB_GADGET_IMX_H
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 1b240990448f..a392ec0d2d51 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index ff4d40d77c30..c9fa3bf5b377 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -5,16 +5,6 @@
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
 
@@ -60,9 +50,6 @@ static const char driver_name[] = "langwell_udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 
-/* controller device global variable */
-static struct langwell_udc	*the_controller;
-
 /* for endpoint 0 operations */
 static const struct usb_endpoint_descriptor
 langwell_ep0_desc = {
@@ -283,7 +270,7 @@ static int langwell_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
@@ -1321,9 +1308,12 @@ static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int langwell_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int langwell_stop(struct usb_gadget_driver *driver);
+static int langwell_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
+static int langwell_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops langwell_ops = {
 
@@ -1345,8 +1335,8 @@ static const struct usb_gadget_ops langwell_ops = {
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= langwell_pullup,
 
-	.start		= langwell_start,
-	.stop		= langwell_stop,
+	.udc_start	= langwell_start,
+	.udc_stop	= langwell_stop,
 };
 
 
@@ -1561,7 +1551,7 @@ static void stop_activity(struct langwell_udc *dev,
 static ssize_t show_function(struct device *_dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 
 	if (!dev->driver || !dev->driver->function
 			|| strlen(dev->driver->function) > PAGE_SIZE)
@@ -1572,11 +1562,25 @@ static ssize_t show_function(struct device *_dev,
 static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
 
 
+static inline enum usb_device_speed lpm_device_speed(u32 reg)
+{
+	switch (LPM_PSPD(reg)) {
+	case LPM_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case LPM_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case LPM_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
 /* device "langwell_udc" sysfs attribute file */
 static ssize_t show_langwell_udc(struct device *_dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 	struct langwell_request *req;
 	struct langwell_ep	*ep = NULL;
 	char			*next;
@@ -1700,20 +1704,7 @@ static ssize_t show_langwell_udc(struct device *_dev,
 		"BmAttributes: %d\n\n",
 		LPM_PTS(tmp_reg),
 		(tmp_reg & LPM_STS) ? 1 : 0,
-		({
-			char	*s;
-			switch (LPM_PSPD(tmp_reg)) {
-			case LPM_SPEED_FULL:
-				s = "Full Speed"; break;
-			case LPM_SPEED_LOW:
-				s = "Low Speed"; break;
-			case LPM_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Unknown Speed"; break;
-			}
-			s;
-		}),
+		usb_speed_string(lpm_device_speed(tmp_reg)),
 		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
 		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
 		LPM_BA(tmp_reg));
@@ -1821,7 +1812,7 @@ static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
 static ssize_t store_remote_wakeup(struct device *_dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 	unsigned long		flags;
 	ssize_t			rc = count;
 
@@ -1857,21 +1848,15 @@ static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
  * the driver might get unbound.
  */
 
-static int langwell_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int langwell_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = gadget_to_langwell(g);
 	unsigned long		flags;
 	int			retval;
 
-	if (!dev)
-		return -ENODEV;
-
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-	if (dev->driver)
-		return -EBUSY;
-
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* hook up the driver ... */
@@ -1881,18 +1866,9 @@ static int langwell_start(struct usb_gadget_driver *driver,
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	retval = bind(&dev->gadget);
-	if (retval) {
-		dev_dbg(&dev->pdev->dev, "bind to driver %s --> %d\n",
-				driver->driver.name, retval);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
-
 	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
 	if (retval)
-		goto err_unbind;
+		goto err;
 
 	dev->usb_state = USB_STATE_ATTACHED;
 	dev->ep0_state = WAIT_FOR_SETUP;
@@ -1909,31 +1885,27 @@ static int langwell_start(struct usb_gadget_driver *driver,
 	dev_info(&dev->pdev->dev, "register driver: %s\n",
 			driver->driver.name);
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return 0;
 
-err_unbind:
-	driver->unbind(&dev->gadget);
+err:
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return retval;
 }
 
 /* unregister gadget driver */
-static int langwell_stop(struct usb_gadget_driver *driver)
+static int langwell_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = gadget_to_langwell(g);
 	unsigned long		flags;
 
-	if (!dev)
-		return -ENODEV;
-
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-	if (unlikely(!driver || !driver->unbind))
-		return -EINVAL;
-
 	/* exit PHY low power suspend */
 	if (dev->pdev->device != 0x0829)
 		langwell_phy_low_power(dev, 0);
@@ -1956,8 +1928,6 @@ static int langwell_stop(struct usb_gadget_driver *driver)
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	/* unbind gadget driver */
-	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -1966,6 +1936,7 @@ static int langwell_stop(struct usb_gadget_driver *driver)
 	dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
 			driver->driver.name);
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return 0;
 }
 
@@ -2657,12 +2628,10 @@ done:
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
-
 /* port change detect interrupt handler */
 static void handle_port_change(struct langwell_udc *dev)
 {
 	u32	portsc1, devlc;
-	u32	speed;
 
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -2677,24 +2646,9 @@ static void handle_port_change(struct langwell_udc *dev)
 	/* bus reset is finished */
 	if (!(portsc1 & PORTS_PR)) {
 		/* get the speed */
-		speed = LPM_PSPD(devlc);
-		switch (speed) {
-		case LPM_SPEED_HIGH:
-			dev->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case LPM_SPEED_FULL:
-			dev->gadget.speed = USB_SPEED_FULL;
-			break;
-		case LPM_SPEED_LOW:
-			dev->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			dev->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-		dev_vdbg(&dev->pdev->dev,
-				"speed = %d, dev->gadget.speed = %d\n",
-				speed, dev->gadget.speed);
+		dev->gadget.speed = lpm_device_speed(devlc);
+		dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
+			dev->gadget.speed);
 	}
 
 	/* LPM L0 to L1 */
@@ -2999,7 +2953,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
 /* release device structure */
 static void gadget_release(struct device *_dev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -3057,7 +3011,7 @@ static void sram_deinit(struct langwell_udc *dev)
 /* tear down the binding between this driver and the pci device */
 static void langwell_udc_remove(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 
 	DECLARE_COMPLETION(done);
 
@@ -3124,8 +3078,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	/* free dev, wait for the release() finished */
 	wait_for_completion(&done);
-
-	the_controller = NULL;
 }
 
 
@@ -3144,11 +3096,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	size_t			size;
 	int			retval;
 
-	if (the_controller) {
-		dev_warn(&pdev->dev, "ignoring\n");
-		return -EBUSY;
-	}
-
 	/* alloc, and start init */
 	dev = kzalloc(sizeof *dev, GFP_KERNEL);
 	if (dev == NULL) {
@@ -3368,8 +3315,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 			"After langwell_udc_probe(), print all registers:\n");
 	print_all_registers(dev);
 
-	the_controller = dev;
-
 	retval = device_register(&dev->gadget.dev);
 	if (retval)
 		goto error;
@@ -3404,7 +3349,7 @@ error:
 /* device controller suspend */
 static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -3452,7 +3397,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 /* device controller resume */
 static int langwell_udc_resume(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 	size_t			size;
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -3534,7 +3479,7 @@ static int langwell_udc_resume(struct pci_dev *pdev)
 /* pci driver shutdown */
 static void langwell_udc_shutdown(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 	u32			usbmode;
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index f1d9c1bb04f3..ef79e242b7b0 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -5,16 +5,6 @@
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
 #include <linux/usb/langwell_udc.h>
@@ -231,3 +221,5 @@ struct langwell_udc {
 	u16			dev_status;
 };
 
+#define gadget_to_langwell(g)	container_of((g), struct langwell_udc, gadget)
+
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 491f825ed5c9..91d0af2a24a8 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/module.h>
@@ -370,7 +360,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
 
 	ep->pipectr = get_pipectr_addr(pipenum);
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	m66592->pipenum2ep[pipenum] = ep;
 	m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep;
 	INIT_LIST_HEAD(&ep->queue);
@@ -447,7 +437,7 @@ static int alloc_pipe_config(struct m66592_ep *ep,
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
@@ -1674,7 +1664,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	m66592->timer.data = (unsigned long)m66592;
 	m66592->reg = reg;
 
-	ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, m66592_irq, IRQF_SHARED,
 			udc_name, m66592);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 7b93d579af37..9d9f7e39f037 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #ifndef __M66592_UDC_H__
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index d3eb27427c58..e24f72f82a47 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -169,7 +160,7 @@ static struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
 	.iProduct	= DRIVER_DESC,
-	.max_speed	= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
 };
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 8c7b74717d85..7e7f515b8b19 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 65f1f7c3bd4e..daa75c12f336 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -1,3 +1,11 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
 
 #ifndef __MV_UDC_H
 #define __MV_UDC_H
@@ -194,14 +202,25 @@ struct mv_udc {
 	unsigned int		ep0_dir;
 
 	unsigned int		dev_addr;
+	unsigned int		test_mode;
 
 	int			errors;
 	unsigned		softconnect:1,
 				vbus_active:1,
 				remote_wakeup:1,
 				softconnected:1,
-				force_fs:1;
-	struct clk		*clk;
+				force_fs:1,
+				clock_gating:1,
+				active:1;
+
+	struct work_struct	vbus_work;
+	struct workqueue_struct *qwork;
+
+	struct mv_usb_platform_data     *pdata;
+
+	/* some SOC has mutiple clock sources for USB*/
+	unsigned int    clknum;
+	struct clk      *clk[0];
 };
 
 /* endpoint data structure */
@@ -225,6 +244,7 @@ struct mv_req {
 	struct mv_dtd		*dtd, *head, *tail;
 	struct mv_ep		*ep;
 	struct list_head	queue;
+	unsigned int            test_mode;
 	unsigned		dtd_count;
 	unsigned		mapped:1;
 };
@@ -289,6 +309,4 @@ struct mv_dtd {
 	struct mv_dtd *next_dtd_virt;
 };
 
-extern int mv_udc_phy_init(unsigned int base);
-
 #endif
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 0b3b8d0462db..892412103dd8 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1,3 +1,14 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *	   Neil Zhang <zhangwm@marvell.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -22,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/platform_data/mv_usb.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
 
@@ -45,6 +57,8 @@
 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
 
+static DECLARE_COMPLETION(release_done);
+
 static const char driver_name[] = "mv_udc";
 static const char driver_desc[] = DRIVER_DESC;
 
@@ -53,6 +67,7 @@ static struct mv_udc	*the_controller;
 int mv_usb_otgsc;
 
 static void nuke(struct mv_ep *ep, int status);
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
 
 /* for endpoint 0 operations */
 static const struct usb_endpoint_descriptor mv_ep0_desc = {
@@ -82,14 +97,16 @@ static void ep0_reset(struct mv_udc *udc)
 			(EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 			| EP_QUEUE_HEAD_IOS;
 
+		ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE;
+
 		epctrlx = readl(&udc->op_regs->epctrlx[0]);
 		if (i) {	/* TX */
-			epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+			epctrlx |= EPCTRL_TX_ENABLE
 				| (USB_ENDPOINT_XFER_CONTROL
 					<< EPCTRL_TX_EP_TYPE_SHIFT);
 
 		} else {	/* RX */
-			epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+			epctrlx |= EPCTRL_RX_ENABLE
 				| (USB_ENDPOINT_XFER_CONTROL
 					<< EPCTRL_RX_EP_TYPE_SHIFT);
 		}
@@ -122,6 +139,7 @@ static int process_ep_req(struct mv_udc *udc, int index,
 	int i, direction;
 	int retval = 0;
 	u32 errors;
+	u32 bit_pos;
 
 	curr_dqh = &udc->ep_dqh[index];
 	direction = index % 2;
@@ -139,10 +157,20 @@ static int process_ep_req(struct mv_udc *udc, int index,
 
 		errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK;
 		if (!errors) {
-			remaining_length +=
+			remaining_length =
 				(curr_dtd->size_ioc_sts	& DTD_PACKET_SIZE)
 					>> DTD_LENGTH_BIT_POS;
 			actual -= remaining_length;
+
+			if (remaining_length) {
+				if (direction) {
+					dev_dbg(&udc->dev->dev,
+						"TX dTD remains data\n");
+					retval = -EPROTO;
+					break;
+				} else
+					break;
+			}
 		} else {
 			dev_info(&udc->dev->dev,
 				"complete_tr error: ep=%d %s: error = 0x%x\n",
@@ -164,6 +192,20 @@ static int process_ep_req(struct mv_udc *udc, int index,
 	if (retval)
 		return retval;
 
+	if (direction == EP_DIR_OUT)
+		bit_pos = 1 << curr_req->ep->ep_num;
+	else
+		bit_pos = 1 << (16 + curr_req->ep->ep_num);
+
+	while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) {
+		if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) {
+			while (readl(&udc->op_regs->epstatus) & bit_pos)
+				udelay(1);
+			break;
+		}
+		udelay(1);
+	}
+
 	curr_req->req.actual = actual;
 
 	return 0;
@@ -481,6 +523,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	u16 max = 0;
 	u32 bit_pos, epctrlx, direction;
 	unsigned char zlt = 0, ios = 0, mult = 0;
+	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
@@ -493,7 +536,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 		return -ESHUTDOWN;
 
 	direction = ep_dir(ep);
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
@@ -501,9 +544,6 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	 */
 	zlt = 1;
 
-	/* Get the endpoint queue head address */
-	dqh = (struct mv_dqh *)ep->dqh;
-
 	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
 	/* Check if the Endpoint is Primed */
@@ -532,7 +572,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	case USB_ENDPOINT_XFER_ISOC:
 		/* Calculate transactions needed for high bandwidth iso */
 		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-		max = max & 0x8ff;	/* bit 0~10 */
+		max = max & 0x7ff;	/* bit 0~10 */
 		/* 3 transactions at most */
 		if (mult > 3)
 			goto en_done;
@@ -540,6 +580,10 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	default:
 		goto en_done;
 	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
 	dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 		| (mult << EP_QUEUE_HEAD_MULT_POS)
 		| (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0)
@@ -572,18 +616,20 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	 */
 	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
 	if ((epctrlx & EPCTRL_RX_ENABLE) == 0) {
-		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
 				<< EPCTRL_RX_EP_TYPE_SHIFT);
 		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
 	}
 
 	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
 	if ((epctrlx & EPCTRL_TX_ENABLE) == 0) {
-		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
 				<< EPCTRL_TX_EP_TYPE_SHIFT);
 		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
 	}
 
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return 0;
 en_done:
 	return -EINVAL;
@@ -595,6 +641,7 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	struct mv_ep *ep;
 	struct mv_dqh *dqh;
 	u32 bit_pos, epctrlx, direction;
+	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
 	if ((_ep == NULL) || !ep->desc)
@@ -605,6 +652,8 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	/* Get the endpoint queue head address */
 	dqh = ep->dqh;
 
+	spin_lock_irqsave(&udc->lock, flags);
+
 	direction = ep_dir(ep);
 	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
@@ -623,6 +672,9 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 
 	ep->desc = NULL;
 	ep->stopped = 1;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return 0;
 }
 
@@ -655,37 +707,28 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 {
 	struct mv_udc *udc;
 	u32 bit_pos, direction;
-	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_ep *ep;
 	unsigned int loops;
 
+	if (!_ep)
+		return;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if (!ep->desc)
+		return;
+
 	udc = ep->udc;
 	direction = ep_dir(ep);
-	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
-	/*
-	 * Flushing will halt the pipe
-	 * Write 1 to the Flush register
-	 */
-	writel(bit_pos, &udc->op_regs->epflush);
 
-	/* Wait until flushing completed */
-	loops = LOOPS(FLUSH_TIMEOUT);
-	while (readl(&udc->op_regs->epflush) & bit_pos) {
-		/*
-		 * ENDPTFLUSH bit should be cleared to indicate this
-		 * operation is complete
-		 */
-		if (loops == 0) {
-			dev_err(&udc->dev->dev,
-				"TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n",
-				(unsigned)readl(&udc->op_regs->epflush),
-				(unsigned)bit_pos);
-			return;
-		}
-		loops--;
-		udelay(LOOPS_USEC);
-	}
+	if (ep->ep_num == 0)
+		bit_pos = (1 << 16) | 1;
+	else if (direction == EP_DIR_OUT)
+		bit_pos = 1 << ep->ep_num;
+	else
+		bit_pos = 1 << (16 + ep->ep_num);
+
 	loops = LOOPS(EPSTATUS_TIMEOUT);
-	while (readl(&udc->op_regs->epstatus) & bit_pos) {
+	do {
 		unsigned int inter_loops;
 
 		if (loops == 0) {
@@ -700,7 +743,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 
 		/* Wait until flushing completed */
 		inter_loops = LOOPS(FLUSH_TIMEOUT);
-		while (readl(&udc->op_regs->epflush) & bit_pos) {
+		while (readl(&udc->op_regs->epflush)) {
 			/*
 			 * ENDPTFLUSH bit should be cleared to indicate this
 			 * operation is complete
@@ -717,7 +760,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 			udelay(LOOPS_USEC);
 		}
 		loops--;
-	}
+	} while (readl(&udc->op_regs->epstatus) & bit_pos);
 }
 
 /* queues (submits) an I/O request to an endpoint */
@@ -987,6 +1030,22 @@ static struct usb_ep_ops mv_ep_ops = {
 	.fifo_flush	= mv_ep_fifo_flush,	/* flush fifo */
 };
 
+static void udc_clock_enable(struct mv_udc *udc)
+{
+	unsigned int i;
+
+	for (i = 0; i < udc->clknum; i++)
+		clk_enable(udc->clk[i]);
+}
+
+static void udc_clock_disable(struct mv_udc *udc)
+{
+	unsigned int i;
+
+	for (i = 0; i < udc->clknum; i++)
+		clk_disable(udc->clk[i]);
+}
+
 static void udc_stop(struct mv_udc *udc)
 {
 	u32 tmp;
@@ -1075,6 +1134,40 @@ static int udc_reset(struct mv_udc *udc)
 	return 0;
 }
 
+static int mv_udc_enable(struct mv_udc *udc)
+{
+	int retval;
+
+	if (udc->clock_gating == 0 || udc->active)
+		return 0;
+
+	dev_dbg(&udc->dev->dev, "enable udc\n");
+	udc_clock_enable(udc);
+	if (udc->pdata->phy_init) {
+		retval = udc->pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"init phy error %d\n", retval);
+			udc_clock_disable(udc);
+			return retval;
+		}
+	}
+	udc->active = 1;
+
+	return 0;
+}
+
+static void mv_udc_disable(struct mv_udc *udc)
+{
+	if (udc->clock_gating && udc->active) {
+		dev_dbg(&udc->dev->dev, "disable udc\n");
+		if (udc->pdata->phy_deinit)
+			udc->pdata->phy_deinit(udc->phy_regs);
+		udc_clock_disable(udc);
+		udc->active = 0;
+	}
+}
+
 static int mv_udc_get_frame(struct usb_gadget *gadget)
 {
 	struct mv_udc *udc;
@@ -1110,22 +1203,68 @@ static int mv_udc_wakeup(struct usb_gadget *gadget)
 	return 0;
 }
 
+static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+	int retval = 0;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, udc->softconnect, udc->vbus_active);
+
+	udc->vbus_active = (is_active != 0);
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->softconnect) {
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
+		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return retval;
+}
+
 static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 {
 	struct mv_udc *udc;
 	unsigned long flags;
+	int retval = 0;
 
 	udc = container_of(gadget, struct mv_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
 
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+			__func__, udc->softconnect, udc->vbus_active);
+
 	udc->softconnect = (is_on != 0);
-	if (udc->driver && udc->softconnect)
-		udc_start(udc);
-	else
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->vbus_active) {
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
 		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
-	return 0;
+	return retval;
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
@@ -1140,17 +1279,15 @@ static const struct usb_gadget_ops mv_ops = {
 	/* tries to wake up the host connected to this gadget */
 	.wakeup		= mv_udc_wakeup,
 
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_udc_vbus_session,
+
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= mv_udc_pullup,
 	.start		= mv_udc_start,
 	.stop		= mv_udc_stop,
 };
 
-static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter)
-{
-	dev_info(&udc->dev->dev, "Test Mode is not support yet\n");
-}
-
 static int eps_init(struct mv_udc *udc)
 {
 	struct mv_ep	*ep;
@@ -1257,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 
 	udc->usb_state = USB_STATE_ATTACHED;
 	udc->ep0_state = WAIT_FOR_SETUP;
-	udc->ep0_dir = USB_DIR_OUT;
+	udc->ep0_dir = EP_DIR_OUT;
 
 	spin_unlock_irqrestore(&udc->lock, flags);
 
@@ -1269,9 +1406,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 		udc->gadget.dev.driver = NULL;
 		return retval;
 	}
-	udc_reset(udc);
-	ep0_reset(udc);
-	udc_start(udc);
+
+	/* pullup is always on */
+	mv_udc_pullup(&udc->gadget, 1);
+
+	/* When boot with cable attached, there will be no vbus irq occurred */
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
 
 	return 0;
 }
@@ -1284,13 +1425,16 @@ static int mv_udc_stop(struct usb_gadget_driver *driver)
 	if (!udc)
 		return -ENODEV;
 
-	udc_stop(udc);
-
 	spin_lock_irqsave(&udc->lock, flags);
 
+	mv_udc_enable(udc);
+	udc_stop(udc);
+
 	/* stop all usb activities */
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	stop_activity(udc, driver);
+	mv_udc_disable(udc);
+
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	/* unbind gadget driver */
@@ -1301,6 +1445,31 @@ static int mv_udc_stop(struct usb_gadget_driver *driver)
 	return 0;
 }
 
+static void mv_set_ptc(struct mv_udc *udc, u32 mode)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	portsc |= mode << 16;
+	writel(portsc, &udc->op_regs->portsc[0]);
+}
+
+static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct mv_udc *udc = the_controller;
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	unsigned long flags;
+
+	dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (req->test_mode) {
+		mv_set_ptc(udc, req->test_mode);
+		req->test_mode = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
 static int
 udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 {
@@ -1310,6 +1479,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 
 	ep = &udc->eps[0];
 	udc->ep0_dir = direction;
+	udc->ep0_state = WAIT_FOR_OUT_STATUS;
 
 	req = udc->status_req;
 
@@ -1323,9 +1493,21 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 	req->ep = ep;
 	req->req.status = -EINPROGRESS;
 	req->req.actual = 0;
-	req->req.complete = NULL;
+	if (udc->test_mode) {
+		req->req.complete = prime_status_complete;
+		req->test_mode = udc->test_mode;
+		udc->test_mode = 0;
+	} else
+		req->req.complete = NULL;
 	req->dtd_count = 0;
 
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+				req->req.buf, req->req.length,
+				ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 1;
+	}
+
 	/* prime the data phase */
 	if (!req_to_dtd(req))
 		retval = queue_dtd(ep, req);
@@ -1346,6 +1528,17 @@ out:
 	return retval;
 }
 
+static void mv_udc_testmode(struct mv_udc *udc, u16 index)
+{
+	if (index <= TEST_FORCE_EN) {
+		udc->test_mode = index;
+		if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+			ep0_stall(udc);
+	} else
+		dev_err(&udc->dev->dev,
+			"This test mode(%d) is not supported\n", index);
+}
+
 static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 {
 	udc->dev_addr = (u8)setup->wValue;
@@ -1360,7 +1553,7 @@ static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
 	struct usb_ctrlrequest *setup)
 {
-	u16 status;
+	u16 status = 0;
 	int retval;
 
 	if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
@@ -1388,6 +1581,8 @@ static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
 	retval = udc_prime_status(udc, EP_DIR_IN, status, false);
 	if (retval)
 		ep0_stall(udc);
+	else
+		udc->ep0_state = DATA_STATE_XMIT;
 }
 
 static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
@@ -1402,9 +1597,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 		case USB_DEVICE_REMOTE_WAKEUP:
 			udc->remote_wakeup = 0;
 			break;
-		case USB_DEVICE_TEST_MODE:
-			mv_udc_testmode(udc, 0, false);
-			break;
 		default:
 			goto out;
 		}
@@ -1433,8 +1625,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 
 	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
 		ep0_stall(udc);
-	else
-		udc->ep0_state = DATA_STATE_XMIT;
 out:
 	return;
 }
@@ -1452,16 +1642,16 @@ static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 			break;
 		case USB_DEVICE_TEST_MODE:
 			if (setup->wIndex & 0xFF
-				&& udc->gadget.speed != USB_SPEED_HIGH)
-				goto out;
-			if (udc->usb_state == USB_STATE_CONFIGURED
-				|| udc->usb_state == USB_STATE_ADDRESS
-				|| udc->usb_state == USB_STATE_DEFAULT)
-				mv_udc_testmode(udc,
-					setup->wIndex & 0xFF00, true);
-			else
-				goto out;
-			break;
+				||  udc->gadget.speed != USB_SPEED_HIGH)
+				ep0_stall(udc);
+
+			if (udc->usb_state != USB_STATE_CONFIGURED
+				&& udc->usb_state != USB_STATE_ADDRESS
+				&& udc->usb_state != USB_STATE_DEFAULT)
+				ep0_stall(udc);
+
+			mv_udc_testmode(udc, (setup->wIndex >> 8));
+			goto out;
 		default:
 			goto out;
 		}
@@ -1599,8 +1789,7 @@ static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr)
 	dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT];
 
 	/* Clear bit in ENDPTSETUPSTAT */
-	temp = readl(&udc->op_regs->epsetupstat);
-	writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat);
+	writel((1 << ep_num), &udc->op_regs->epsetupstat);
 
 	/* while a hazard exists when setup package arrives */
 	do {
@@ -1871,23 +2060,57 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t mv_udc_vbus_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+
+	/* polling VBUS and init phy may cause too much time*/
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
+
+	return IRQ_HANDLED;
+}
+
+static void mv_udc_vbus_work(struct work_struct *work)
+{
+	struct mv_udc *udc;
+	unsigned int vbus;
+
+	udc = container_of(work, struct mv_udc, vbus_work);
+	if (!udc->pdata->vbus)
+		return;
+
+	vbus = udc->pdata->vbus->poll();
+	dev_info(&udc->dev->dev, "vbus is %d\n", vbus);
+
+	if (vbus == VBUS_HIGH)
+		mv_udc_vbus_session(&udc->gadget, 1);
+	else if (vbus == VBUS_LOW)
+		mv_udc_vbus_session(&udc->gadget, 0);
+}
+
 /* release device structure */
 static void gadget_release(struct device *_dev)
 {
 	struct mv_udc *udc = the_controller;
 
 	complete(udc->done);
-	kfree(udc);
 }
 
-static int mv_udc_remove(struct platform_device *dev)
+static int __devexit mv_udc_remove(struct platform_device *dev)
 {
 	struct mv_udc *udc = the_controller;
-	DECLARE_COMPLETION(done);
+	int clk_i;
 
 	usb_del_gadget_udc(&udc->gadget);
 
-	udc->done = &done;
+	if (udc->qwork) {
+		flush_workqueue(udc->qwork);
+		destroy_workqueue(udc->qwork);
+	}
+
+	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+		free_irq(udc->pdata->vbus->irq, &dev->dev);
 
 	/* free memory allocated in probe */
 	if (udc->dtd_pool)
@@ -1902,6 +2125,8 @@ static int mv_udc_remove(struct platform_device *dev)
 	if (udc->irq)
 		free_irq(udc->irq, &dev->dev);
 
+	mv_udc_disable(udc);
+
 	if (udc->cap_regs)
 		iounmap(udc->cap_regs);
 	udc->cap_regs = NULL;
@@ -1915,45 +2140,62 @@ static int mv_udc_remove(struct platform_device *dev)
 		kfree(udc->status_req);
 	}
 
+	for (clk_i = 0; clk_i <= udc->clknum; clk_i++)
+		clk_put(udc->clk[clk_i]);
+
 	device_unregister(&udc->gadget.dev);
 
 	/* free dev, wait for the release() finished */
-	wait_for_completion(&done);
+	wait_for_completion(udc->done);
+	kfree(udc);
 
 	the_controller = NULL;
 
 	return 0;
 }
 
-int mv_udc_probe(struct platform_device *dev)
+static int __devinit mv_udc_probe(struct platform_device *dev)
 {
+	struct mv_usb_platform_data *pdata = dev->dev.platform_data;
 	struct mv_udc *udc;
 	int retval = 0;
+	int clk_i = 0;
 	struct resource *r;
 	size_t size;
 
-	udc = kzalloc(sizeof *udc, GFP_KERNEL);
+	if (pdata == NULL) {
+		dev_err(&dev->dev, "missing platform_data\n");
+		return -ENODEV;
+	}
+
+	size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
+	udc = kzalloc(size, GFP_KERNEL);
 	if (udc == NULL) {
 		dev_err(&dev->dev, "failed to allocate memory for udc\n");
-		retval = -ENOMEM;
-		goto error;
+		return -ENOMEM;
 	}
 
+	the_controller = udc;
+	udc->done = &release_done;
+	udc->pdata = dev->dev.platform_data;
 	spin_lock_init(&udc->lock);
 
 	udc->dev = dev;
 
-	udc->clk = clk_get(&dev->dev, "U2OCLK");
-	if (IS_ERR(udc->clk)) {
-		retval = PTR_ERR(udc->clk);
-		goto error;
+	udc->clknum = pdata->clknum;
+	for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
+		udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]);
+		if (IS_ERR(udc->clk[clk_i])) {
+			retval = PTR_ERR(udc->clk[clk_i]);
+			goto err_put_clk;
+		}
 	}
 
-	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o");
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
 	if (r == NULL) {
 		dev_err(&dev->dev, "no I/O memory resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_put_clk;
 	}
 
 	udc->cap_regs = (struct mv_cap_regs __iomem *)
@@ -1961,29 +2203,31 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->cap_regs == NULL) {
 		dev_err(&dev->dev, "failed to map I/O memory\n");
 		retval = -EBUSY;
-		goto error;
+		goto err_put_clk;
 	}
 
-	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy");
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
 	if (r == NULL) {
 		dev_err(&dev->dev, "no phy I/O memory resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_iounmap_capreg;
 	}
 
 	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
 	if (udc->phy_regs == 0) {
 		dev_err(&dev->dev, "failed to map phy I/O memory\n");
 		retval = -EBUSY;
-		goto error;
+		goto err_iounmap_capreg;
 	}
 
 	/* we will acces controller register, so enable the clk */
-	clk_enable(udc->clk);
-	retval = mv_udc_phy_init(udc->phy_regs);
-	if (retval) {
-		dev_err(&dev->dev, "phy initialization error %d\n", retval);
-		goto error;
+	udc_clock_enable(udc);
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&dev->dev, "phy init error %d\n", retval);
+			goto err_iounmap_phyreg;
+		}
 	}
 
 	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
@@ -1991,6 +2235,13 @@ int mv_udc_probe(struct platform_device *dev)
 			& CAPLENGTH_MASK));
 	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
 
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop udc here.
+	 */
+	udc_stop(udc);
+	writel(0xFFFFFFFF, &udc->op_regs->usbsts);
+
 	size = udc->max_eps * sizeof(struct mv_dqh) *2;
 	size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
 	udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
@@ -1999,7 +2250,7 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->ep_dqh == NULL) {
 		dev_err(&dev->dev, "allocate dQH memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_disable_clock;
 	}
 	udc->ep_dqh_size = size;
 
@@ -2012,7 +2263,7 @@ int mv_udc_probe(struct platform_device *dev)
 
 	if (!udc->dtd_pool) {
 		retval = -ENOMEM;
-		goto error;
+		goto err_free_dma;
 	}
 
 	size = udc->max_eps * sizeof(struct mv_ep) *2;
@@ -2020,7 +2271,7 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->eps == NULL) {
 		dev_err(&dev->dev, "allocate ep memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_destroy_dma;
 	}
 
 	/* initialize ep0 status request structure */
@@ -2028,13 +2279,13 @@ int mv_udc_probe(struct platform_device *dev)
 	if (!udc->status_req) {
 		dev_err(&dev->dev, "allocate status_req memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_free_eps;
 	}
 	INIT_LIST_HEAD(&udc->status_req->queue);
 
 	/* allocate a small amount of memory to get valid address */
 	udc->status_req->req.buf = kzalloc(8, GFP_KERNEL);
-	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
+	udc->status_req->req.dma = DMA_ADDR_INVALID;
 
 	udc->resume_state = USB_STATE_NOTATTACHED;
 	udc->usb_state = USB_STATE_POWERED;
@@ -2045,15 +2296,15 @@ int mv_udc_probe(struct platform_device *dev)
 	if (r == NULL) {
 		dev_err(&dev->dev, "no IRQ resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_free_status_req;
 	}
 	udc->irq = r->start;
 	if (request_irq(udc->irq, mv_udc_irq,
-		IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) {
+		IRQF_SHARED, driver_name, udc)) {
 		dev_err(&dev->dev, "Request irq %d for UDC failed\n",
 			udc->irq);
 		retval = -ENODEV;
-		goto error;
+		goto err_free_status_req;
 	}
 
 	/* initialize gadget structure */
@@ -2072,18 +2323,82 @@ int mv_udc_probe(struct platform_device *dev)
 
 	retval = device_register(&udc->gadget.dev);
 	if (retval)
-		goto error;
+		goto err_free_irq;
 
 	eps_init(udc);
 
-	the_controller = udc;
+	/* VBUS detect: we can disable/enable clock on demand.*/
+	if (pdata->vbus) {
+		udc->clock_gating = 1;
+		retval = request_threaded_irq(pdata->vbus->irq, NULL,
+				mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
+		if (retval) {
+			dev_info(&dev->dev,
+				"Can not request irq for VBUS, "
+				"disable clock gating\n");
+			udc->clock_gating = 0;
+		}
+
+		udc->qwork = create_singlethread_workqueue("mv_udc_queue");
+		if (!udc->qwork) {
+			dev_err(&dev->dev, "cannot create workqueue\n");
+			retval = -ENOMEM;
+			goto err_unregister;
+		}
+
+		INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
+	}
+
+	/*
+	 * When clock gating is supported, we can disable clk and phy.
+	 * If not, it means that VBUS detection is not supported, we
+	 * have to enable vbus active all the time to let controller work.
+	 */
+	if (udc->clock_gating) {
+		if (udc->pdata->phy_deinit)
+			udc->pdata->phy_deinit(udc->phy_regs);
+		udc_clock_disable(udc);
+	} else
+		udc->vbus_active = 1;
 
 	retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
-	if (!retval)
-		return retval;
-error:
-	if (udc)
-		mv_udc_remove(udc->dev);
+	if (retval)
+		goto err_unregister;
+
+	dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n",
+		udc->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_unregister:
+	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+		free_irq(pdata->vbus->irq, &dev->dev);
+	device_unregister(&udc->gadget.dev);
+err_free_irq:
+	free_irq(udc->irq, &dev->dev);
+err_free_status_req:
+	kfree(udc->status_req->req.buf);
+	kfree(udc->status_req);
+err_free_eps:
+	kfree(udc->eps);
+err_destroy_dma:
+	dma_pool_destroy(udc->dtd_pool);
+err_free_dma:
+	dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+err_disable_clock:
+	if (udc->pdata->phy_deinit)
+		udc->pdata->phy_deinit(udc->phy_regs);
+	udc_clock_disable(udc);
+err_iounmap_phyreg:
+	iounmap((void *)udc->phy_regs);
+err_iounmap_capreg:
+	iounmap(udc->cap_regs);
+err_put_clk:
+	for (clk_i--; clk_i >= 0; clk_i--)
+		clk_put(udc->clk[clk_i]);
+	the_controller = NULL;
+	kfree(udc);
 	return retval;
 }
 
@@ -2102,11 +2417,16 @@ static int mv_udc_resume(struct device *_dev)
 	struct mv_udc *udc = the_controller;
 	int retval;
 
-	retval = mv_udc_phy_init(udc->phy_regs);
-	if (retval) {
-		dev_err(_dev, "phy initialization error %d\n", retval);
-		return retval;
+	if (udc->pdata->phy_init) {
+		retval = udc->pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"init phy error %d when resume back\n",
+				retval);
+			return retval;
+		}
 	}
+
 	udc_reset(udc);
 	ep0_reset(udc);
 	udc_start(udc);
@@ -2120,9 +2440,21 @@ static const struct dev_pm_ops mv_udc_pm_ops = {
 };
 #endif
 
+static void mv_udc_shutdown(struct platform_device *dev)
+{
+	struct mv_udc *udc = the_controller;
+	u32 mode;
+
+	/* reset controller mode to IDLE */
+	mode = readl(&udc->op_regs->usbmode);
+	mode &= ~3;
+	writel(mode, &udc->op_regs->usbmode);
+}
+
 static struct platform_driver udc_driver = {
 	.probe		= mv_udc_probe,
 	.remove		= __exit_p(mv_udc_remove),
+	.shutdown	= mv_udc_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "pxa-u2o",
diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c
deleted file mode 100644
index d4dea97e38a5..000000000000
--- a/drivers/usb/gadget/mv_udc_phy.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-
-#include <mach/cputype.h>
-
-#ifdef CONFIG_ARCH_MMP
-
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN			(1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1			(1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2			(1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN			(1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN			(1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT		30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT		12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT		1
-#define UTMI_CTRL_PWR_UP_SHIFT			0
-/* For UTMI_PLL Register */
-#define UTMI_PLL_CLK_BLK_EN_SHIFT		24
-#define UTMI_PLL_FBDIV_SHIFT			4
-#define UTMI_PLL_REFDIV_SHIFT			0
-#define UTMI_PLL_FBDIV_MASK			0x00000FF0
-#define UTMI_PLL_REFDIV_MASK			0x0000000F
-#define UTMI_PLL_ICP_MASK			0x00007000
-#define UTMI_PLL_KVCO_MASK			0x00031000
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_ICP_SHIFT			12
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN		(0x1 << 26)
-#define UTMI_TX_LOW_VDD_EN_SHIFT		11
-#define UTMI_TX_IMPCAL_VTH_SHIFT		14
-#define UTMI_TX_IMPCAL_VTH_MASK			(0x7 << 14)
-#define UTMI_TX_CK60_PHSEL_SHIFT		17
-#define UTMI_TX_CK60_PHSEL_MASK			(0xf << 17)
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK			(0x3 << 22)
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-/* For UTMI_RX Register */
-#define UTMI_RX_SQ_THRESH_SHIFT			4
-#define UTMI_RX_SQ_THRESH_MASK			(0xf << 4)
-#define UTMI_REG_SQ_LENGTH_SHIFT		15
-#define UTMI_REG_SQ_LENGTH_MASK			(0x3 << 15)
-
-#define REG_RCAL_START				0x00001000
-#define VCOCAL_START				0x00200000
-#define KVCO_EXT				0x00400000
-#define PLL_READY				0x00800000
-#define CLK_BLK_EN				0x01000000
-#endif
-
-static unsigned int u2o_read(unsigned int base, unsigned int offset)
-{
-	return readl(base + offset);
-}
-
-static void u2o_set(unsigned int base, unsigned int offset, unsigned int value)
-{
-	unsigned int reg;
-
-	reg = readl(base + offset);
-	reg |= value;
-	writel(reg, base + offset);
-	readl(base + offset);
-}
-
-static void u2o_clear(unsigned int base, unsigned int offset,
-	unsigned int value)
-{
-	unsigned int reg;
-
-	reg = readl(base + offset);
-	reg &= ~value;
-	writel(reg, base + offset);
-	readl(base + offset);
-}
-
-static void u2o_write(unsigned int base, unsigned int offset,
-	unsigned int value)
-{
-	writel(value, base + offset);
-	readl(base + offset);
-}
-
-#ifdef CONFIG_ARCH_MMP
-int mv_udc_phy_init(unsigned int base)
-{
-	unsigned long timeout;
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1 << UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT)
-		| (0xb << UTMI_PLL_REFDIV_SHIFT)
-		| (3 << UTMI_PLL_PLLVDD18_SHIFT)
-		| (3 << UTMI_PLL_PLLVDD12_SHIFT)
-		| (3 << UTMI_PLL_PLLCALI12_SHIFT)
-		| (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT));
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK
-		| UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK
-		| UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT)
-		| (4 << UTMI_TX_CK60_PHSEL_SHIFT)
-		| (4 << UTMI_TX_IMPCAL_VTH_SHIFT)
-		| (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT)
-		| (3 << UTMI_TX_AMP_SHIFT));
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	if (cpu_is_pxa168())
-		u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT)
-			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
-	else
-		u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT)
-			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/*
-		 * fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf
-		 */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* calibrate */
-	timeout = jiffies + 100;
-	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
-		if (time_after(jiffies, timeout))
-			return -ETIME;
-		cpu_relax();
-	}
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(200);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(200);
-
-	/* make sure phy is ready */
-	timeout = jiffies + 100;
-	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
-		if (time_after(jiffies, timeout))
-			return -ETIME;
-		cpu_relax();
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-	return 0;
-}
-#else
-int mv_udc_phy_init(unsigned int base)
-{
-	return 0;
-}
-#endif
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 62ee5087dcac..89530034dff1 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -14,15 +14,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define DEBUG */
diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h
index df886cec5ef4..b0e52fc277b4 100644
--- a/drivers/usb/gadget/ndis.h
+++ b/drivers/usb/gadget/ndis.h
@@ -10,12 +10,6 @@
  *
  * This source code is offered for use in the public domain. You may
  * use, modify or distribute it freely.
- *
- * This code is distributed in the hope that it will be useful but
- * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
- * DISCLAIMED. This includes but is not limited to warranties of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
  */
 
 #ifndef _LINUX_NDIS_H
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index ab98ea926a11..d1b76368472f 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	spin_lock_irqsave(&dev->lock, flags);
 	_ep->maxpacket = max & 0x7fff;
@@ -1172,17 +1172,18 @@ net2272_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int net2272_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int net2272_stop(struct usb_gadget_driver *driver);
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2272_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops net2272_ops = {
-	.get_frame       = net2272_get_frame,
-	.wakeup          = net2272_wakeup,
+	.get_frame	= net2272_get_frame,
+	.wakeup		= net2272_wakeup,
 	.set_selfpowered = net2272_set_selfpowered,
-	.pullup			= net2272_pullup,
-	.start			= net2272_start,
-	.stop			= net2272_stop,
+	.pullup		= net2272_pullup,
+	.udc_start	= net2272_start,
+	.udc_stop	= net2272_stop,
 };
 
 /*---------------------------------------------------------------------------*/
@@ -1356,8 +1357,6 @@ net2272_set_fifo_mode(struct net2272 *dev, int mode)
 
 /*---------------------------------------------------------------------------*/
 
-static struct net2272 *the_controller;
-
 static void
 net2272_usb_reset(struct net2272 *dev)
 {
@@ -1453,20 +1452,17 @@ net2272_ep0_start(struct net2272 *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-static int net2272_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *))
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2272 *dev = the_controller;
-	int ret;
+	struct net2272 *dev;
 	unsigned i;
 
-	if (!driver || !bind || !driver->unbind || !driver->setup ||
+	if (!driver || !driver->unbind || !driver->setup ||
 	    driver->speed != USB_SPEED_HIGH)
 		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
+
+	dev = container_of(_gadget, struct net2272, gadget);
 
 	for (i = 0; i < 4; ++i)
 		dev->ep[i].irqs = 0;
@@ -1475,14 +1471,6 @@ static int net2272_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	ret = bind(&dev->gadget);
-	if (ret) {
-		dev_dbg(dev->dev, "bind to driver %s --> %d\n",
-			driver->driver.name, ret);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return ret;
-	}
 
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
@@ -1510,33 +1498,21 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 4; ++i)
 		net2272_dequeue_all(&dev->ep[i]);
 
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-
-	}
 	net2272_usb_reinit(dev);
 }
 
-static int net2272_stop(struct usb_gadget_driver *driver)
+static int net2272_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2272 *dev = the_controller;
+	struct net2272 *dev;
 	unsigned long flags;
 
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver)
-		return -EINVAL;
+	dev = container_of(_gadget, struct net2272, gadget);
 
 	spin_lock_irqsave(&dev->lock, flags);
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	net2272_pullup(&dev->gadget, 0);
-
-	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -1764,8 +1740,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
 				dev->gadget.speed = USB_SPEED_HIGH;
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
-			dev_dbg(dev->dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+			dev_dbg(dev->dev, "%s\n",
+				usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep[0];
@@ -2238,7 +2214,6 @@ net2272_remove(struct net2272 *dev)
 	device_remove_file(dev->dev, &dev_attr_registers);
 
 	dev_info(dev->dev, "unbind\n");
-	the_controller = NULL;
 }
 
 static struct net2272 * __devinit
@@ -2246,11 +2221,6 @@ net2272_probe_init(struct device *dev, unsigned int irq)
 {
 	struct net2272 *ret;
 
-	if (the_controller) {
-		dev_warn(dev, "ignoring\n");
-		return ERR_PTR(-EBUSY);
-	}
-
 	if (!irq) {
 		dev_dbg(dev, "No IRQ!\n");
 		return ERR_PTR(-ENODEV);
@@ -2307,8 +2277,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 		dma_mode_string());
 	dev_info(dev->dev, "version: %s\n", driver_vers);
 
-	the_controller = dev;
-
 	ret = device_register(&dev->gadget.dev);
 	if (ret)
 		goto err_irq;
@@ -2684,8 +2652,6 @@ net2272_plat_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n",
 		(net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no ");
 
-	the_controller = dev;
-
 	return 0;
 
  err_io:
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index a218a4de5dc9..7f1bc9a73cda 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -33,15 +33,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #undef	DEBUG		/* messages on error and most fault paths */
@@ -169,7 +160,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		return -EDOM;
 
 	/* sanity check ep-e/ep-f since their fifos are small */
-	max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp (desc) & 0x1fff;
 	if (ep->num > 4 && max > 64)
 		return -ERANGE;
 
@@ -1410,17 +1401,18 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int net2280_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int net2280_stop(struct usb_gadget_driver *driver);
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2280_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops net2280_ops = {
 	.get_frame	= net2280_get_frame,
 	.wakeup		= net2280_wakeup,
 	.set_selfpowered = net2280_set_selfpowered,
 	.pullup		= net2280_pullup,
-	.start		= net2280_start,
-	.stop		= net2280_stop,
+	.udc_start	= net2280_start,
+	.udc_stop	= net2280_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1640,7 +1632,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
 				 default:
 					val = "iso"; break;
 				 }; val; }),
-				le16_to_cpu (d->wMaxPacketSize) & 0x1fff,
+				usb_endpoint_maxp (d) & 0x1fff,
 				ep->dma ? "dma" : "pio", ep->fifo_size
 				);
 		} else /* ep0 should only have one transfer queued */
@@ -1753,8 +1745,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode)
  * perhaps to bind specific drivers to specific devices.
  */
 
-static struct net2280	*the_controller;
-
 static void usb_reset (struct net2280 *dev)
 {
 	u32	tmp;
@@ -1880,10 +1870,10 @@ static void ep0_start (struct net2280 *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-static int net2280_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2280		*dev = the_controller;
+	struct net2280		*dev;
 	int			retval;
 	unsigned		i;
 
@@ -1891,14 +1881,11 @@ static int net2280_start(struct usb_gadget_driver *driver,
 	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
 	 * "must not be used in normal operation"
 	 */
-	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
-			|| !bind || !driver->setup)
+	if (!driver || driver->speed != USB_SPEED_HIGH
+			|| !driver->setup)
 		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
+
+	dev = container_of (_gadget, struct net2280, gadget);
 
 	for (i = 0; i < 7; i++)
 		dev->ep [i].irqs = 0;
@@ -1908,14 +1895,6 @@ static int net2280_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	retval = bind(&dev->gadget);
-	if (retval) {
-		DEBUG (dev, "bind to driver %s --> %d\n",
-				driver->driver.name, retval);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
 
 	retval = device_create_file (&dev->pdev->dev, &dev_attr_function);
 	if (retval) goto err_unbind;
@@ -1961,33 +1940,21 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 7; i++)
 		nuke (&dev->ep [i]);
 
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock (&dev->lock);
-		driver->disconnect (&dev->gadget);
-		spin_lock (&dev->lock);
-	}
-
 	usb_reinit (dev);
 }
 
-static int net2280_stop(struct usb_gadget_driver *driver)
+static int net2280_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2280	*dev = the_controller;
+	struct net2280	*dev;
 	unsigned long	flags;
 
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver || !driver->unbind)
-		return -EINVAL;
+	dev = container_of (_gadget, struct net2280, gadget);
 
 	spin_lock_irqsave (&dev->lock, flags);
 	stop_activity (dev, driver);
 	spin_unlock_irqrestore (&dev->lock, flags);
 
-	net2280_pullup (&dev->gadget, 0);
-
-	driver->unbind (&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -2266,9 +2233,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
 			net2280_led_speed (dev, dev->gadget.speed);
-			DEBUG (dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH)
-					? "high" : "full");
+			DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep [0];
@@ -2709,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev)
 	pci_set_drvdata (pdev, NULL);
 
 	INFO (dev, "unbind\n");
-
-	the_controller = NULL;
 }
 
 /* wrap this driver around the specified device, but
@@ -2724,14 +2687,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	void			__iomem *base = NULL;
 	int			retval, i;
 
-	/* if you want to support more than one controller in a system,
-	 * usb_gadget_driver_{register,unregister}() must change.
-	 */
-	if (the_controller) {
-		dev_warn (&pdev->dev, "ignoring\n");
-		return -EBUSY;
-	}
-
 	/* alloc, and start init */
 	dev = kzalloc (sizeof *dev, GFP_KERNEL);
 	if (dev == NULL){
@@ -2858,8 +2813,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			use_dma
 				? (use_dma_chaining ? "chaining" : "enabled")
 				: "disabled");
-	the_controller = dev;
-
 	retval = device_register (&dev->gadget.dev);
 	if (retval) goto done;
 	retval = device_create_file (&pdev->dev, &dev_attr_registers);
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index c36852263d93..a844be0d683a 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -11,15 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/usb/net2280.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 740c7daed279..788989a10223 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #undef	DEBUG
@@ -166,15 +157,14 @@ static int omap_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->maxpacket < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
 		DBG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
-	maxp = le16_to_cpu (desc->wMaxPacketSize);
+	maxp = usb_endpoint_maxp(desc);
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
 				&& maxp != ep->maxpacket)
-			|| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
+			|| usb_endpoint_maxp(desc) > ep->maxpacket
 			|| !desc->wMaxPacketSize) {
 		DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
 		return -ERANGE;
@@ -2968,7 +2958,7 @@ known:
 	}
 #ifdef	USE_ISO
 	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
-			IRQF_DISABLED, "omap_udc iso", udc);
+			0, "omap_udc iso", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[3].start, status);
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f96615ab6b77..550d6dcdf104 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -4,15 +4,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/kernel.h>
@@ -947,7 +938,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	else
 		buff_size = UDC_EPOUT_BUFF_SIZE;
 	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
-	pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+	pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
 	pch_udc_ep_set_nak(ep);
 	pch_udc_ep_fifo_flush(ep, ep->in);
 	/* Configure the endpoint */
@@ -957,7 +948,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
 	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
 	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
-	      le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+	      usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;
 
 	if (ep->in)
 		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
@@ -1466,7 +1457,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
 	ep->desc = desc;
 	ep->halted = 0;
 	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 	spin_unlock_irqrestore(&dev->lock, iflags);
 	return 0;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index a341dde6f9c3..65a8834f274b 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/module.h>
@@ -971,23 +962,15 @@ printer_set_config(struct printer_dev *dev, unsigned number)
 		usb_gadget_vbus_draw(dev->gadget,
 				dev->gadget->is_otg ? 8 : 100);
 	} else {
-		char *speed;
 		unsigned power;
 
 		power = 2 * config_desc.bMaxPower;
 		usb_gadget_vbus_draw(dev->gadget, power);
 
-		switch (gadget->speed) {
-		case USB_SPEED_FULL:	speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-		case USB_SPEED_HIGH:	speed = "high"; break;
-#endif
-		default:		speed = "?"; break;
-		}
-
 		dev->config = number;
-		INFO(dev, "%s speed config #%d: %d mA, %s\n",
-				speed, number, power, driver_desc);
+		INFO(dev, "%s config #%d: %d mA, %s\n",
+		     usb_speed_string(gadget->speed),
+		     number, power, driver_desc);
 	}
 	return result;
 }
@@ -1611,7 +1594,7 @@ cleanup(void)
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	unregister_chrdev_region(g_printer_devno, 2);
+	unregister_chrdev_region(g_printer_devno, 1);
 	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e4e59b4de25d..c090a7e3ecf8 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -11,16 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 /* #define VERBOSE_DEBUG */
@@ -232,8 +222,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->fifo_size < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
 		DMSG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
@@ -248,7 +237,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 
 	/* hardware _could_ do smaller, but driver doesn't */
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-				&& le16_to_cpu (desc->wMaxPacketSize)
+				&& usb_endpoint_maxp (desc)
 						!= BULK_FIFO_SIZE)
 			|| !desc->wMaxPacketSize) {
 		DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
@@ -264,7 +253,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	ep->desc = desc;
 	ep->stopped = 0;
 	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp (desc);
 
 	/* flush fifo (mostly for OUT buffers) */
 	pxa25x_ep_fifo_flush (_ep);
@@ -401,7 +390,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
 	unsigned		max;
 
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(ep->desc);
 	do {
 		unsigned	count;
 		int		is_last, is_short;
@@ -671,8 +660,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	 * we can report per-packet status.  that also helps with dma.
 	 */
 	if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-			&& req->req.length > le16_to_cpu
-						(ep->desc->wMaxPacketSize)))
+		        && req->req.length > usb_endpoint_maxp (ep->desc)))
 		return -EMSGSIZE;
 
 	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
@@ -1105,7 +1093,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			tmp = *dev->ep [i].reg_udccs;
 			seq_printf(m,
 				"%s max %d %s udccs %02x irqs %lu\n",
-				ep->ep.name, le16_to_cpu(desc->wMaxPacketSize),
+				ep->ep.name, usb_endpoint_maxp(desc),
 				"pio", tmp, ep->pio_irqs);
 			/* TODO translate all five groups of udccs bits! */
 
@@ -2202,7 +2190,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq, pxa25x_udc_irq,
-			IRQF_DISABLED, driver_name, dev);
+			0, driver_name, dev);
 	if (retval != 0) {
 		pr_err("%s: can't get irq %d, err %d\n",
 			driver_name, irq, retval);
@@ -2214,7 +2202,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	if (machine_is_lubbock()) {
 		retval = request_irq(LUBBOCK_USB_DISC_IRQ,
 				lubbock_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				IRQF_SAMPLE_RANDOM,
 				driver_name, dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
@@ -2223,7 +2211,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 		}
 		retval = request_irq(LUBBOCK_USB_IRQ,
 				lubbock_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				IRQF_SAMPLE_RANDOM,
 				driver_name, dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index f572c5617462..8eaf4e43726b 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_USB_GADGET_PXA25X_H
@@ -161,8 +152,6 @@ static struct pxa25x_udc *the_controller;
 
 #ifdef DEBUG
 
-static int is_vbus_present(void);
-
 static const char *state_name[] = {
 	"EP0_IDLE",
 	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
@@ -214,8 +203,7 @@ dump_state(struct pxa25x_udc *dev)
 	u32		tmp;
 	unsigned	i;
 
-	DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
-		is_vbus_present() ? "host " : "disconnected",
+	DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
 		state_name[dev->ep0state],
 		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
 	dump_udccr("udccr");
@@ -232,9 +220,6 @@ dump_state(struct pxa25x_udc *dev)
 	} else
 		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
 
-	if (!is_vbus_present())
-		return;
-
 	dump_udccs0 ("udccs0");
 	DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
 		dev->stats.write.bytes, dev->stats.write.ops,
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b68c75dc9d..18b6b091f2a6 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -8,16 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -1439,7 +1429,7 @@ static int pxa_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (ep->fifo_size < usb_endpoint_maxp(desc)) {
 		ep_err(ep, "bad maxpacket\n");
 		return -ERANGE;
 	}
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index b01696eab068..7f4e8f424e80 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
  */
 
 #ifndef __LINUX_USB_GADGET_PXA27X_H
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 50991e5bd5e8..68a826a1b866 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/module.h>
@@ -28,13 +18,14 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
 #include "r8a66597-udc.h"
 
-#define DRIVER_VERSION	"2009-08-18"
+#define DRIVER_VERSION	"2011-09-26"
 
 static const char udc_name[] = "r8a66597_udc";
 static const char *r8a66597_ep_name[] = {
@@ -115,13 +106,15 @@ static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum)
 	u16 pid = 0;
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		pid = r8a66597_read(r8a66597, DCPCTR) & PID;
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		pid = r8a66597_read(r8a66597, offset) & PID;
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 
 	return pid;
 }
@@ -131,13 +124,15 @@ static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum,
 {
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		r8a66597_mdfy(r8a66597, pid, PID, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		r8a66597_mdfy(r8a66597, pid, PID, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 }
 
 static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum)
@@ -160,13 +155,15 @@ static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum)
 	u16 ret = 0;
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		ret = r8a66597_read(r8a66597, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		ret = r8a66597_read(r8a66597, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 
 	return ret;
 }
@@ -177,13 +174,63 @@ static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum)
 
 	pipe_stop(r8a66597, pipenum);
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		r8a66597_bset(r8a66597, SQCLR, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		r8a66597_bset(r8a66597, SQCLR, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+}
+
+static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0) {
+		r8a66597_bset(r8a66597, SQSET, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQSET, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+}
+
+static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		return r8a66597_read(r8a66597, DCPCTR) & SQMON;
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		return r8a66597_read(r8a66597, offset) & SQMON;
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+
+	return 0;
+}
+
+static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	return control_reg_sqmon(r8a66597, pipenum);
+}
+
+static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum,
+			       u16 toggle)
+{
+	if (toggle)
+		control_reg_sqset(r8a66597, pipenum);
+	else
+		control_reg_sqclr(r8a66597, pipenum);
 }
 
 static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum)
@@ -222,18 +269,51 @@ static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
 		return MBW_16;
 }
 
+static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum,
+				    u16 isel, u16 fifosel)
+{
+	u16 tmp, mask, loop;
+	int i = 0;
+
+	if (!pipenum) {
+		mask = ISEL | CURPIPE;
+		loop = isel;
+	} else {
+		mask = CURPIPE;
+		loop = pipenum;
+	}
+	r8a66597_mdfy(r8a66597, loop, mask, fifosel);
+
+	do {
+		tmp = r8a66597_read(r8a66597, fifosel);
+		if (i++ > 1000000) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"r8a66597: register%x, loop %x "
+				"is timeout\n", fifosel, loop);
+			break;
+		}
+		ndelay(1);
+	} while ((tmp & mask) != loop);
+}
+
 static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum)
 {
 	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
 
 	if (ep->use_dma)
-		return;
+		r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
 
 	r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel);
 
 	ndelay(450);
 
-	r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	if (r8a66597_is_sudmac(r8a66597) && ep->use_dma)
+		r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	else
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+
+	if (ep->use_dma)
+		r8a66597_bset(r8a66597, DREQE, ep->fifosel);
 }
 
 static int pipe_buffer_setting(struct r8a66597 *r8a66597,
@@ -297,17 +377,18 @@ static void pipe_buffer_release(struct r8a66597 *r8a66597,
 	if (info->pipe == 0)
 		return;
 
-	if (is_bulk_pipe(info->pipe))
+	if (is_bulk_pipe(info->pipe)) {
 		r8a66597->bulk--;
-	else if (is_interrupt_pipe(info->pipe))
+	} else if (is_interrupt_pipe(info->pipe)) {
 		r8a66597->interrupt--;
-	else if (is_isoc_pipe(info->pipe)) {
+	} else if (is_isoc_pipe(info->pipe)) {
 		r8a66597->isochronous--;
 		if (info->type == R8A66597_BULK)
 			r8a66597->bulk--;
-	} else
-		printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n",
-				info->pipe);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ep_release: unexpect pipenum (%d)\n", info->pipe);
+	}
 }
 
 static void pipe_initialize(struct r8a66597_ep *ep)
@@ -337,11 +418,17 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
 	ep->fifoaddr = CFIFO;
 	ep->fifosel = CFIFOSEL;
 	ep->fifoctr = CFIFOCTR;
-	ep->fifotrn = 0;
 
 	ep->pipectr = get_pipectr_addr(pipenum);
+	if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) {
+		ep->pipetre = get_pipetre_addr(pipenum);
+		ep->pipetrn = get_pipetrn_addr(pipenum);
+	} else {
+		ep->pipetre = 0;
+		ep->pipetrn = 0;
+	}
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	r8a66597->pipenum2ep[pipenum] = ep;
 	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
 		= ep;
@@ -381,7 +468,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	case USB_ENDPOINT_XFER_BULK:
 		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
 			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
-				printk(KERN_ERR "bulk pipe is insufficient\n");
+				dev_err(r8a66597_to_dev(r8a66597),
+					"bulk pipe is insufficient\n");
 				return -ENODEV;
 			} else {
 				info.pipe = R8A66597_BASE_PIPENUM_ISOC
@@ -397,7 +485,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) {
-			printk(KERN_ERR "interrupt pipe is insufficient\n");
+			dev_err(r8a66597_to_dev(r8a66597),
+				"interrupt pipe is insufficient\n");
 			return -ENODEV;
 		}
 		info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt;
@@ -406,7 +495,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
 		if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
-			printk(KERN_ERR "isochronous pipe is insufficient\n");
+			dev_err(r8a66597_to_dev(r8a66597),
+				"isochronous pipe is insufficient\n");
 			return -ENODEV;
 		}
 		info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous;
@@ -414,13 +504,13 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		counter = &r8a66597->isochronous;
 		break;
 	default:
-		printk(KERN_ERR "unexpect xfer type\n");
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n");
 		return -EINVAL;
 	}
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
@@ -429,7 +519,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 
 	ret = pipe_buffer_setting(r8a66597, &info);
 	if (ret < 0) {
-		printk(KERN_ERR "pipe_buffer_setting fail\n");
+		dev_err(r8a66597_to_dev(r8a66597),
+			"pipe_buffer_setting fail\n");
 		return ret;
 	}
 
@@ -495,6 +586,124 @@ static void start_ep0_write(struct r8a66597_ep *ep,
 	}
 }
 
+static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum,
+			    u16 fifosel)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE;
+	if (tmp == pipenum)
+		r8a66597_change_curpipe(r8a66597, 0, 0, fifosel);
+}
+
+static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum,
+			     int enable)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+	u16 tmp, toggle;
+
+	/* check current BFRE bit */
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE;
+	if ((enable && tmp) || (!enable && !tmp))
+		return;
+
+	/* change BFRE bit */
+	pipe_stop(r8a66597, pipenum);
+	disable_fifosel(r8a66597, pipenum, CFIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D0FIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D1FIFOSEL);
+
+	toggle = save_usb_toggle(r8a66597, pipenum);
+
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	if (enable)
+		r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG);
+	else
+		r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG);
+
+	/* initialize for internal BFRE flag */
+	r8a66597_bset(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_bclr(r8a66597, ACLRM, ep->pipectr);
+
+	restore_usb_toggle(r8a66597, pipenum, toggle);
+}
+
+static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597_dma *dma;
+
+	if (!r8a66597_is_sudmac(r8a66597))
+		return -ENODEV;
+
+	/* Check transfer type */
+	if (!is_bulk_pipe(ep->pipenum))
+		return -EIO;
+
+	if (r8a66597->dma.used)
+		return -EBUSY;
+
+	/* set SUDMAC parameters */
+	dma = &r8a66597->dma;
+	dma->used = 1;
+	if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+		dma->dir = 1;
+	} else {
+		dma->dir = 0;
+		change_bfre_mode(r8a66597, ep->pipenum, 1);
+	}
+
+	/* set r8a66597_ep paramters */
+	ep->use_dma = 1;
+	ep->dma = dma;
+	ep->fifoaddr = D0FIFO;
+	ep->fifosel = D0FIFOSEL;
+	ep->fifoctr = D0FIFOCTR;
+
+	/* dma mapping */
+	req->req.dma = dma_map_single(r8a66597_to_dev(ep->r8a66597),
+				req->req.buf, req->req.length,
+				dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	return 0;
+}
+
+static void sudmac_free_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	if (!r8a66597_is_sudmac(r8a66597))
+		return;
+
+	dma_unmap_single(r8a66597_to_dev(ep->r8a66597),
+			 req->req.dma, req->req.length,
+			 ep->dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
+	r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel);
+
+	ep->dma->used = 0;
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+}
+
+static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep,
+			 struct r8a66597_request *req)
+{
+	BUG_ON(req->req.length == 0);
+
+	r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG);
+	r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA);
+	r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC);
+	r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL);
+
+	r8a66597_sudmac_write(r8a66597, DEN, CH0DEN);
+}
+
 static void start_packet_write(struct r8a66597_ep *ep,
 				struct r8a66597_request *req)
 {
@@ -505,11 +714,29 @@ static void start_packet_write(struct r8a66597_ep *ep,
 	disable_irq_empty(r8a66597, ep->pipenum);
 	pipe_start(r8a66597, ep->pipenum);
 
-	tmp = r8a66597_read(r8a66597, ep->fifoctr);
-	if (unlikely((tmp & FRDY) == 0))
-		pipe_irq_enable(r8a66597, ep->pipenum);
-	else
-		irq_packet_write(ep, req);
+	if (req->req.length == 0) {
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS);
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_empty(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			tmp = r8a66597_read(r8a66597, ep->fifoctr);
+			if (unlikely((tmp & FRDY) == 0))
+				pipe_irq_enable(r8a66597, ep->pipenum);
+			else
+				irq_packet_write(ep, req);
+		} else {
+			/* DMA mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_nrdy(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			enable_irq_nrdy(r8a66597, ep->pipenum);
+			sudmac_start(r8a66597, ep, req);
+		}
+	}
 }
 
 static void start_packet_read(struct r8a66597_ep *ep,
@@ -524,17 +751,26 @@ static void start_packet_read(struct r8a66597_ep *ep,
 		pipe_start(r8a66597, pipenum);
 		pipe_irq_enable(r8a66597, pipenum);
 	} else {
-		if (ep->use_dma) {
-			r8a66597_bset(r8a66597, TRCLR, ep->fifosel);
-			pipe_change(r8a66597, pipenum);
-			r8a66597_bset(r8a66597, TRENB, ep->fifosel);
+		pipe_stop(r8a66597, pipenum);
+		if (ep->pipetre) {
+			enable_irq_nrdy(r8a66597, pipenum);
+			r8a66597_write(r8a66597, TRCLR, ep->pipetre);
 			r8a66597_write(r8a66597,
-				(req->req.length + ep->ep.maxpacket - 1)
-					/ ep->ep.maxpacket,
-				ep->fifotrn);
+				DIV_ROUND_UP(req->req.length, ep->ep.maxpacket),
+				ep->pipetrn);
+			r8a66597_bset(r8a66597, TRENB, ep->pipetre);
+		}
+
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			change_bfre_mode(r8a66597, ep->pipenum, 0);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
+			pipe_irq_enable(r8a66597, pipenum);
+		} else {
+			pipe_change(r8a66597, pipenum);
+			sudmac_start(r8a66597, ep, req);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
 		}
-		pipe_start(r8a66597, pipenum);	/* trigger once */
-		pipe_irq_enable(r8a66597, pipenum);
 	}
 }
 
@@ -564,7 +800,8 @@ static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req)
 		control_end(ep->r8a66597, 0);
 		break;
 	default:
-		printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq);
+		dev_err(r8a66597_to_dev(ep->r8a66597),
+			"start_ep0: unexpect ctsq(%x)\n", ctsq);
 		break;
 	}
 }
@@ -690,6 +927,9 @@ __acquires(r8a66597->lock)
 	if (!list_empty(&ep->queue))
 		restart = 1;
 
+	if (ep->use_dma)
+		sudmac_free_channel(ep->r8a66597, ep, req);
+
 	spin_unlock(&ep->r8a66597->lock);
 	req->req.complete(&ep->ep, &req->req);
 	spin_lock(&ep->r8a66597->lock);
@@ -718,7 +958,8 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
 	do {
 		tmp = r8a66597_read(r8a66597, ep->fifoctr);
 		if (i++ > 100000) {
-			printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus"
+			dev_err(r8a66597_to_dev(r8a66597),
+				"pipe0 is busy. maybe cpu i/o bus "
 				"conflict. please power off this controller.");
 			return;
 		}
@@ -733,7 +974,7 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
 	/* write fifo */
 	if (req->req.buf) {
 		if (size > 0)
-			r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+			r8a66597_write_fifo(r8a66597, ep, buf, size);
 		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
 			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
 	}
@@ -769,7 +1010,8 @@ static void irq_packet_write(struct r8a66597_ep *ep,
 	if (unlikely((tmp & FRDY) == 0)) {
 		pipe_stop(r8a66597, pipenum);
 		pipe_irq_disable(r8a66597, pipenum);
-		printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum);
+		dev_err(r8a66597_to_dev(r8a66597),
+			"write fifo not ready. pipnum=%d\n", pipenum);
 		return;
 	}
 
@@ -780,7 +1022,7 @@ static void irq_packet_write(struct r8a66597_ep *ep,
 
 	/* write fifo */
 	if (req->req.buf) {
-		r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		r8a66597_write_fifo(r8a66597, ep, buf, size);
 		if ((size == 0)
 				|| ((size % ep->ep.maxpacket) != 0)
 				|| ((bufsize != ep->ep.maxpacket)
@@ -819,7 +1061,7 @@ static void irq_packet_read(struct r8a66597_ep *ep,
 		req->req.status = -EPIPE;
 		pipe_stop(r8a66597, pipenum);
 		pipe_irq_disable(r8a66597, pipenum);
-		printk(KERN_ERR "read fifo not ready");
+		dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready");
 		return;
 	}
 
@@ -1095,7 +1337,7 @@ static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597)
 		break;
 	default:
 		r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
-		printk(KERN_ERR "USB speed unknown\n");
+		dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n");
 	}
 }
 
@@ -1158,11 +1400,71 @@ __acquires(r8a66597->lock)
 		control_end(r8a66597, 0);
 		break;
 	default:
-		printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ctrl_stage: unexpect ctsq(%x)\n", ctsq);
 		break;
 	}
 }
 
+static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep)
+{
+	u16 pipenum;
+	struct r8a66597_request *req;
+	u32 len;
+	int i = 0;
+
+	pipenum = ep->pipenum;
+	pipe_change(r8a66597, pipenum);
+
+	while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) {
+		udelay(1);
+		if (unlikely(i++ >= 10000)) {	/* timeout = 10 msec */
+			dev_err(r8a66597_to_dev(r8a66597),
+				"%s: FRDY was not set (%d)\n",
+				__func__, pipenum);
+			return;
+		}
+	}
+
+	r8a66597_bset(r8a66597, BCLR, ep->fifoctr);
+	req = get_request_from_ep(ep);
+
+	/* prepare parameters */
+	len = r8a66597_sudmac_read(r8a66597, CH0CBC);
+	req->req.actual += len;
+
+	/* clear */
+	r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR);
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (len % ep->ep.maxpacket)) {
+		if (ep->dma->dir) {
+			disable_irq_ready(r8a66597, pipenum);
+			enable_irq_empty(r8a66597, pipenum);
+		} else {
+			/* Clear the interrupt flag for next transfer */
+			r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+			transfer_complete(ep, req, 0);
+		}
+	}
+}
+
+static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597)
+{
+	u32 irqsts;
+	struct r8a66597_ep *ep;
+	u16 pipenum;
+
+	irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS);
+	if (irqsts & CH0ENDS) {
+		r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR);
+		pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE);
+		ep = r8a66597->pipenum2ep[pipenum];
+		sudmac_finish(r8a66597, ep);
+	}
+}
+
 static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 {
 	struct r8a66597 *r8a66597 = _r8a66597;
@@ -1173,6 +1475,9 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 	u16 savepipe;
 	u16 mask0;
 
+	if (r8a66597_is_sudmac(r8a66597))
+		r8a66597_sudmac_irq(r8a66597);
+
 	spin_lock(&r8a66597->lock);
 
 	intsts0 = r8a66597_read(r8a66597, INTSTS0);
@@ -1433,23 +1738,18 @@ static struct usb_ep_ops r8a66597_ep_ops = {
 };
 
 /*-------------------------------------------------------------------------*/
-static struct r8a66597 *the_controller;
-
-static int r8a66597_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int r8a66597_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct r8a66597 *r8a66597 = the_controller;
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 	int retval;
 
 	if (!driver
 			|| driver->speed != USB_SPEED_HIGH
-			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
 	if (!r8a66597)
 		return -ENODEV;
-	if (r8a66597->driver)
-		return -EBUSY;
 
 	/* hook up the driver */
 	driver->driver.bus = NULL;
@@ -1458,14 +1758,8 @@ static int r8a66597_start(struct usb_gadget_driver *driver,
 
 	retval = device_add(&r8a66597->gadget.dev);
 	if (retval) {
-		printk(KERN_ERR "device_add error (%d)\n", retval);
-		goto error;
-	}
-
-	retval = bind(&r8a66597->gadget);
-	if (retval) {
-		printk(KERN_ERR "bind to driver error (%d)\n", retval);
-		device_del(&r8a66597->gadget.dev);
+		dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n",
+			retval);
 		goto error;
 	}
 
@@ -1489,23 +1783,17 @@ error:
 	return retval;
 }
 
-static int r8a66597_stop(struct usb_gadget_driver *driver)
+static int r8a66597_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct r8a66597 *r8a66597 = the_controller;
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 	unsigned long flags;
 
-	if (driver != r8a66597->driver || !driver->unbind)
-		return -EINVAL;
-
 	spin_lock_irqsave(&r8a66597->lock, flags);
-	if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
-		r8a66597_usb_disconnect(r8a66597);
 	r8a66597_bclr(r8a66597, VBSE, INTENB0);
 	disable_controller(r8a66597);
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
-	driver->unbind(&r8a66597->gadget);
-
 	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
@@ -1535,8 +1823,8 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on)
 
 static struct usb_gadget_ops r8a66597_gadget_ops = {
 	.get_frame		= r8a66597_get_frame,
-	.start			= r8a66597_start,
-	.stop			= r8a66597_stop,
+	.udc_start		= r8a66597_start,
+	.udc_stop		= r8a66597_stop,
 	.pullup			= r8a66597_pullup,
 };
 
@@ -1547,6 +1835,8 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	iounmap(r8a66597->reg);
+	if (r8a66597->pdata->sudmac)
+		iounmap(r8a66597->sudmac_reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 #ifdef CONFIG_HAVE_CLK
@@ -1563,6 +1853,26 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r)
 {
 }
 
+static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
+					  struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac");
+	if (!res) {
+		dev_err(&pdev->dev, "platform_get_resource error(sudmac).\n");
+		return -ENODEV;
+	}
+
+	r8a66597->sudmac_reg = ioremap(res->start, resource_size(res));
+	if (r8a66597->sudmac_reg == NULL) {
+		dev_err(&pdev->dev, "ioremap error(sudmac).\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
 #ifdef CONFIG_HAVE_CLK
@@ -1579,7 +1889,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		ret = -ENODEV;
-		printk(KERN_ERR "platform_get_resource error.\n");
+		dev_err(&pdev->dev, "platform_get_resource error.\n");
 		goto clean_up;
 	}
 
@@ -1589,14 +1899,14 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 
 	if (irq < 0) {
 		ret = -ENODEV;
-		printk(KERN_ERR "platform_get_irq error.\n");
+		dev_err(&pdev->dev, "platform_get_irq error.\n");
 		goto clean_up;
 	}
 
 	reg = ioremap(res->start, resource_size(res));
 	if (reg == NULL) {
 		ret = -ENOMEM;
-		printk(KERN_ERR "ioremap error.\n");
+		dev_err(&pdev->dev, "ioremap error.\n");
 		goto clean_up;
 	}
 
@@ -1604,7 +1914,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL);
 	if (r8a66597 == NULL) {
 		ret = -ENOMEM;
-		printk(KERN_ERR "kzalloc error\n");
+		dev_err(&pdev->dev, "kzalloc error\n");
 		goto clean_up;
 	}
 
@@ -1640,13 +1950,18 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		clk_enable(r8a66597->clk);
 	}
 #endif
+	if (r8a66597->pdata->sudmac) {
+		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
+		if (ret < 0)
+			goto clean_up2;
+	}
 
 	disable_controller(r8a66597); /* make sure controller is disabled */
 
-	ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(irq, r8a66597_irq, IRQF_SHARED,
 			udc_name, r8a66597);
 	if (ret < 0) {
-		printk(KERN_ERR "request_irq error (%d)\n", ret);
+		dev_err(&pdev->dev, "request_irq error (%d)\n", ret);
 		goto clean_up2;
 	}
 
@@ -1672,13 +1987,10 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->ep[0].fifoaddr = CFIFO;
 	r8a66597->ep[0].fifosel = CFIFOSEL;
 	r8a66597->ep[0].fifoctr = CFIFOCTR;
-	r8a66597->ep[0].fifotrn = 0;
 	r8a66597->ep[0].pipectr = get_pipectr_addr(0);
 	r8a66597->pipenum2ep[0] = &r8a66597->ep[0];
 	r8a66597->epaddr2ep[0] = &r8a66597->ep[0];
 
-	the_controller = r8a66597;
-
 	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
 							GFP_KERNEL);
 	if (r8a66597->ep0_req == NULL)
@@ -1705,6 +2017,8 @@ clean_up2:
 #endif
 clean_up:
 	if (r8a66597) {
+		if (r8a66597->sudmac_reg)
+			iounmap(r8a66597->sudmac_reg);
 		if (r8a66597->ep0_req)
 			r8a66597_free_request(&r8a66597->ep[0].ep,
 						r8a66597->ep0_req);
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 503f766c23a7..8e3de61cd4b8 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #ifndef __R8A66597_H__
@@ -53,6 +43,7 @@
 	((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
 	 (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
 
+#define r8a66597_is_sudmac(r8a66597)	(r8a66597->pdata->sudmac)
 struct r8a66597_pipe_info {
 	u16	pipe;
 	u16	epnum;
@@ -70,6 +61,7 @@ struct r8a66597_request {
 struct r8a66597_ep {
 	struct usb_ep		ep;
 	struct r8a66597		*r8a66597;
+	struct r8a66597_dma	*dma;
 
 	struct list_head	queue;
 	unsigned		busy:1;
@@ -85,13 +77,20 @@ struct r8a66597_ep {
 	unsigned char		fifoaddr;
 	unsigned char		fifosel;
 	unsigned char		fifoctr;
-	unsigned char		fifotrn;
 	unsigned char		pipectr;
+	unsigned char		pipetre;
+	unsigned char		pipetrn;
+};
+
+struct r8a66597_dma {
+	unsigned		used:1;
+	unsigned		dir:1;	/* 1 = IN(write), 0 = OUT(read) */
 };
 
 struct r8a66597 {
 	spinlock_t		lock;
 	void __iomem		*reg;
+	void __iomem		*sudmac_reg;
 
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
@@ -104,6 +103,7 @@ struct r8a66597 {
 	struct r8a66597_ep	ep[R8A66597_MAX_NUM_PIPE];
 	struct r8a66597_ep	*pipenum2ep[R8A66597_MAX_NUM_PIPE];
 	struct r8a66597_ep	*epaddr2ep[16];
+	struct r8a66597_dma	dma;
 
 	struct timer_list	timer;
 	struct usb_request	*ep0_req;	/* for internal request */
@@ -124,6 +124,7 @@ struct r8a66597 {
 #define gadget_to_r8a66597(_gadget)	\
 		container_of(_gadget, struct r8a66597, gadget)
 #define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget)
+#define r8a66597_to_dev(r8a66597)	(r8a66597->gadget.dev.parent)
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
@@ -182,12 +183,27 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 	iowrite16(val, r8a66597->reg + offset);
 }
 
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
-				       unsigned long offset,
+				       struct r8a66597_ep *ep,
 				       unsigned char *buf,
 				       int len)
 {
-	void __iomem *fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr;
 	int adj = 0;
 	int i;
 
@@ -215,18 +231,12 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 			adj = 0x01; /* 16-bit wide */
 	}
 
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
 	for (i = 0; i < len; i++)
 		iowrite8(buf[i], fifoaddr + adj - (i & adj));
-}
-
-static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
-				 u16 val, u16 pat, unsigned long offset)
-{
-	u16 tmp;
-	tmp = r8a66597_read(r8a66597, offset);
-	tmp = tmp & (~pat);
-	tmp = tmp | val;
-	r8a66597_write(r8a66597, tmp, offset);
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
 }
 
 static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
@@ -251,12 +261,21 @@ static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
 	return clock;
 }
 
-#define r8a66597_bclr(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, 0, val, offset)
-#define r8a66597_bset(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, val, 0, offset)
+static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597,
+				       unsigned long offset)
+{
+	return ioread32(r8a66597->sudmac_reg + offset);
+}
+
+static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val,
+					 unsigned long offset)
+{
+	iowrite32(val, r8a66597->sudmac_reg + offset);
+}
 
 #define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum)	(PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
 
 #define enable_irq_ready(r8a66597, pipenum)	\
 	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8bdee67ce09a..a552453dc946 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	case S3C_DSTS_EnumSpd_FS:
 	case S3C_DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
-		dev_info(hsotg->dev, "new device is full-speed\n");
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 64;
 		break;
 
 	case S3C_DSTS_EnumSpd_HS:
-		dev_info(hsotg->dev, "new device is high-speed\n");
 		hsotg->gadget.speed = USB_SPEED_HIGH;
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 512;
 		break;
 
 	case S3C_DSTS_EnumSpd_LS:
 		hsotg->gadget.speed = USB_SPEED_LOW;
-		dev_info(hsotg->dev, "new device is low-speed\n");
-
 		/* note, we don't actually support LS in this driver at the
 		 * moment, and the documentation seems to imply that it isn't
 		 * supported by the PHYs on some of the devices.
 		 */
 		break;
 	}
+	dev_info(hsotg->dev, "new device is %s\n",
+		 usb_speed_string(hsotg->gadget.speed));
 
 	/* we should now know the maximum packet size for an
 	 * endpoint, so set the endpoints to a default value. */
@@ -2297,7 +2293,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		return -EINVAL;
 	}
 
-	mps = le16_to_cpu(desc->wMaxPacketSize);
+	mps = usb_endpoint_maxp(desc);
 
 	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
 
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 3fa717c5f4bc..8d54f893cefe 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 #include <linux/prefetch.h>
 
 #include <mach/regs-s3c2443-clock.h>
@@ -137,6 +138,7 @@ struct s3c_hsudc {
 	struct usb_gadget_driver *driver;
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
+	struct otg_transceiver *transceiver;
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;
@@ -759,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || hsep->desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
-		|| ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize))
+		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
 		return -EINVAL;
 
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-		&& le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep))
+		&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
 		|| !desc->wMaxPacketSize)
 		return -ERANGE;
 
@@ -779,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 
 	hsep->stopped = hsep->wedge = 0;
 	hsep->desc = desc;
-	hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	s3c_hsudc_set_halt(_ep, 0);
 	__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
@@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		return ret;
 	}
 
+	/* connect to bus through transceiver */
+	if (hsudc->transceiver) {
+		ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
+		if (ret) {
+			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
+					hsudc->gadget.name);
+			driver->unbind(&hsudc->gadget);
+
+			device_del(&hsudc->gadget.dev);
+
+			hsudc->driver = NULL;
+			hsudc->gadget.dev.driver = NULL;
+			return ret;
+		}
+	}
+
 	enable_irq(hsudc->irq);
 	dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name);
 
@@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 	s3c_hsudc_stop_activity(hsudc, driver);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
+	if (hsudc->transceiver)
+		(void) otg_set_peripheral(hsudc->transceiver, NULL);
+
 	driver->unbind(&hsudc->gadget);
 	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
@@ -1220,10 +1241,24 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
 	return s3c_hsudc_read_frameno(to_hsudc(gadget));
 }
 
+static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct s3c_hsudc *hsudc = the_controller;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (hsudc->transceiver)
+		return otg_set_power(hsudc->transceiver, mA);
+
+	return -EOPNOTSUPP;
+}
+
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
 	.start		= s3c_hsudc_start,
 	.stop		= s3c_hsudc_stop,
+	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 
 static int s3c_hsudc_probe(struct platform_device *pdev)
@@ -1247,6 +1282,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
+	hsudc->transceiver = otg_get_transceiver();
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");
@@ -1269,19 +1306,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 		goto err_remap;
 	}
 
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(dev, "unable to obtain IRQ number\n");
-		goto err_irq;
-	}
-	hsudc->irq = ret;
-
-	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
-	if (ret < 0) {
-		dev_err(dev, "irq request failed\n");
-		goto err_irq;
-	}
-
 	spin_lock_init(&hsudc->lock);
 
 	device_initialize(&hsudc->gadget.dev);
@@ -1299,6 +1323,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	s3c_hsudc_setup_ep(hsudc);
 
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "unable to obtain IRQ number\n");
+		goto err_irq;
+	}
+	hsudc->irq = ret;
+
+	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
+	if (ret < 0) {
+		dev_err(dev, "irq request failed\n");
+		goto err_irq;
+	}
+
 	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 8d31848aab09..b8643771fa80 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -10,16 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -1082,7 +1072,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	local_irq_save (flags);
 	_ep->maxpacket = max & 0x7ff;
@@ -1903,7 +1893,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
-			     IRQF_DISABLED, gadget_name, udc);
+			     0, gadget_name, udc);
 
 	if (retval != 0) {
 		dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
@@ -1927,7 +1917,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		}
 
 		retval = request_irq(irq, s3c2410_udc_vbus_irq,
-				     IRQF_DISABLED | IRQF_TRIGGER_RISING
+				     IRQF_TRIGGER_RISING
 				     | IRQF_TRIGGER_FALLING | IRQF_SHARED,
 				     gadget_name, udc);
 
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h
index 9e0bece4f241..a48f619cb1cc 100644
--- a/drivers/usb/gadget/s3c2410_udc.h
+++ b/drivers/usb/gadget/s3c2410_udc.h
@@ -9,16 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #ifndef _S3C2410_UDC_H
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index d3dd227a2bfc..c7f291a331df 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -52,6 +43,12 @@
  * characters rather then a pointer to void.
  */
 
+/*
+ * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
+ * sets the number of pipeline buffers (length of the fsg_buffhd array).
+ * The valid range of num_buffers is: num >= 2 && num <= 4.
+ */
+
 
 #include <linux/usb/storage.h>
 #include <scsi/scsi.h>
@@ -247,6 +244,8 @@ struct fsg_lun {
 	u32		sense_data_info;
 	u32		unit_attention_data;
 
+	unsigned int	blkbits;	/* Bits of logical block size of bound block device */
+	unsigned int	blksize;	/* logical block size of bound block device */
 	struct device	dev;
 };
 
@@ -262,8 +261,31 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
 #define EP0_BUFSIZE	256
 #define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
 
-/* Number of buffers we will use.  2 is enough for double-buffering */
-#define FSG_NUM_BUFFERS	2
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
+MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+/* check if fsg_num_buffers is within a valid range */
+static inline int fsg_num_buffers_validate(void)
+{
+	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
+		return 0;
+	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
+	       fsg_num_buffers, 2 ,4);
+	return -EINVAL;
+}
 
 /* Default size of buffer length. */
 #define FSG_BUFLEN	((u32)16384)
@@ -493,12 +515,128 @@ static struct usb_descriptor_header *fsg_hs_function[] = {
 	NULL,
 };
 
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_ss_intr_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(2),
+	.bInterval =		9,	/* 2**(9-1) = 256 uframes -> 32 ms */
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.wBytesPerInterval =	cpu_to_le16(2),
+};
+
+#ifndef FSG_NO_OTG
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	2
+#else
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	1
+#endif
+
+#endif
+
+static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
+	.bLength =		USB_DT_USB_EXT_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_CAP_TYPE_EXT,
+
+	.bmAttributes =		cpu_to_le32(USB_LPM_SUPPORT),
+};
+
+static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
+	.bLength =		USB_DT_USB_SS_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_SS_CAP_TYPE,
+
+	/* .bmAttributes = LTM is not supported yet */
+
+	.wSpeedSupported =	cpu_to_le16(USB_LOW_SPEED_OPERATION
+		| USB_FULL_SPEED_OPERATION
+		| USB_HIGH_SPEED_OPERATION
+		| USB_5GBPS_OPERATION),
+	.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
+	.bU1devExitLat =	USB_DEFAULT_U1_DEV_EXIT_LAT,
+	.bU2DevExitLat =	USB_DEFAULT_U2_DEV_EXIT_LAT,
+};
+
+static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
+	.bLength =		USB_DT_BOS_SIZE,
+	.bDescriptorType =	USB_DT_BOS,
+
+	.wTotalLength =		USB_DT_BOS_SIZE
+				+ USB_DT_USB_EXT_CAP_SIZE
+				+ USB_DT_USB_SS_CAP_SIZE,
+
+	.bNumDeviceCaps =	2,
+};
+
+static struct usb_descriptor_header *fsg_ss_function[] = {
+#ifndef FSG_NO_OTG
+	(struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
+#ifndef FSG_NO_INTR_EP
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc,
+#endif
+	NULL,
+};
+
 /* Maxpacket and other transfer characteristics vary by speed. */
 static __maybe_unused struct usb_endpoint_descriptor *
 fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
-		struct usb_endpoint_descriptor *hs)
+		struct usb_endpoint_descriptor *hs,
+		struct usb_endpoint_descriptor *ss)
 {
-	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return ss;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return hs;
 	return fs;
 }
@@ -580,13 +718,24 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 		rc = (int) size;
 		goto out;
 	}
-	num_sectors = size >> 9;	/* File size in 512-byte blocks */
+
+	if (curlun->cdrom) {
+		curlun->blksize = 2048;
+		curlun->blkbits = 11;
+	} else if (inode->i_bdev) {
+		curlun->blksize = bdev_logical_block_size(inode->i_bdev);
+		curlun->blkbits = blksize_bits(curlun->blksize);
+	} else {
+		curlun->blksize = 512;
+		curlun->blkbits = 9;
+	}
+
+	num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
 	min_sectors = 1;
 	if (curlun->cdrom) {
-		num_sectors &= ~3;	/* Reduce to a multiple of 2048 */
-		min_sectors = 300*4;	/* Smallest track is 300 frames */
-		if (num_sectors >= 256*60*75*4) {
-			num_sectors = (256*60*75 - 1) * 4;
+		min_sectors = 300;	/* Smallest track is 300 frames */
+		if (num_sectors >= 256*60*75) {
+			num_sectors = 256*60*75 - 1;
 			LINFO(curlun, "file too big: %s\n", filename);
 			LINFO(curlun, "using only first %d blocks\n",
 					(int) num_sectors);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index dfed4c1d96c0..29c854bbca44 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index c966440ddd70..8012357e98aa 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __U_ETHER_H
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index a8aa46962d81..3a4a664bab44 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -552,9 +552,8 @@ recycle:
 	/* Push from tty to ldisc; without low_latency set this is handled by
 	 * a workqueue, so we won't get callbacks and can hold port_lock
 	 */
-	if (tty && do_push) {
+	if (tty && do_push)
 		tty_flip_buffer_push(tty);
-	}
 
 
 	/* We want our data queue to become empty ASAP, keeping data
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 05ba47214361..022baeca7c94 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -356,7 +356,7 @@ static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
 static ssize_t usb_udc_softconn_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
-	struct usb_udc		*udc = dev_get_drvdata(dev);
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "connect")) {
 		usb_gadget_connect(udc->gadget);
@@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	struct usb_gadget	*gadget = udc->gadget;
-
-	switch (gadget->speed) {
-	case USB_SPEED_LOW:
-		return snprintf(buf, PAGE_SIZE, "low-speed\n");
-	case USB_SPEED_FULL:
-		return snprintf(buf, PAGE_SIZE, "full-speed\n");
-	case USB_SPEED_HIGH:
-		return snprintf(buf, PAGE_SIZE, "high-speed\n");
-	case USB_SPEED_WIRELESS:
-		return snprintf(buf, PAGE_SIZE, "wireless\n");
-	case USB_SPEED_SUPER:
-		return snprintf(buf, PAGE_SIZE, "super-speed\n");
-	case USB_SPEED_UNKNOWN:	/* FALLTHROUGH */
-	default:
-		return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
-	}
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			usb_speed_string(udc->gadget->speed));
 }
 static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
 
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 81971fbc7ea5..bc78c606c12b 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #ifndef _UVC_GADGET_H_
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index aa0ad34e0f1f..d776adb2da67 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index cfb58384394d..f6e083b50191 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index b08f35438d70..b0e53a8ea4f7 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index df6882de50bf..668fe128f2ef 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -8,8 +8,8 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
+
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/usb/video.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 00e2fd2d4791..20697cc132d1 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */