diff options
| author | Nicolas Ferre <nicolas.ferre@microchip.com> | 2017-08-31 14:51:40 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-10-12 11:51:15 +0200 |
| commit | 744f9e1da2a59881e9e5bdc5e264c47b69f56ed5 (patch) | |
| tree | 38a1090ee584ec922e1ad5d49d55621ccee50644 /drivers/usb/gadget | |
| parent | 7f850036134c491361e5297dde8762ac79934a83 (diff) | |
usb: gadget: udc: atmel: set vbus irqflags explicitly
commit 6baeda120d90aa637b08f7604de104ab00ce9126 upstream.
The driver triggers actions on both edges of the vbus signal.
The former PIO controller was triggering IRQs on both falling and rising edges
by default. Newer PIO controller don't, so it's better to set it explicitly to
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING.
Without this patch we may trigger the connection with host but only on some
bouncing signal conditions and thus lose connecting events.
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/gadget')
| -rw-r--r-- | drivers/usb/gadget/udc/atmel_usba_udc.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index a95b3e75f750..ad8402906f77 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -28,6 +28,8 @@ #include <linux/of_gpio.h> #include "atmel_usba_udc.h" +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \ + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING) #ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h> @@ -2172,7 +2174,7 @@ static int usba_udc_probe(struct platform_device *pdev) IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(udc->vbus_pin), NULL, - usba_vbus_irq_thread, IRQF_ONESHOT, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, "atmel_usba_udc", udc); if (ret) { udc->vbus_pin = -ENODEV; |