Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 299 insertions, 0 deletions

diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
new file mode 100644
index 000000000000..4c45ba8390f8
--- /dev/null
+++ b/drivers/usb/host/uhci-hub.c
@@ -0,0 +1,299 @@
+/*
+ * Universal Host Controller Interface driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Georg Acher, acher@in.tum.de
+ * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
+ * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
+ * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
+ */
+
+static __u8 root_hub_hub_des[] =
+{
+	0x09,			/*  __u8  bLength; */
+	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	0x02,			/*  __u8  bNbrPorts; */
+	0x0a,			/* __u16  wHubCharacteristics; */
+	0x00,			/*   (per-port OC, no power switching) */
+	0x01,			/*  __u8  bPwrOn2pwrGood; 2ms */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0x00,			/*  __u8  DeviceRemovable; *** 7 Ports max *** */
+	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+#define	UHCI_RH_MAXCHILD	7
+
+/* must write as zeroes */
+#define WZ_BITS		(USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
+
+/* status change bits:  nonzero writes will clear */
+#define RWC_BITS	(USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
+
+static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int port;
+
+	*buf = 0;
+	for (port = 0; port < uhci->rh_numports; ++port) {
+		if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
+				test_bit(port, &uhci->port_c_suspend))
+			*buf |= (1 << (port + 1));
+	}
+	if (*buf && uhci->state == UHCI_SUSPENDED)
+		uhci->resume_detect = 1;
+	return !!*buf;
+}
+
+#define OK(x)			len = (x); break
+
+#define CLR_RH_PORTSTAT(x) \
+	status = inw(port_addr); \
+	status &= ~(RWC_BITS|WZ_BITS); \
+	status &= ~(x); \
+	status |= RWC_BITS & (x); \
+	outw(status, port_addr)
+
+#define SET_RH_PORTSTAT(x) \
+	status = inw(port_addr); \
+	status |= (x); \
+	status &= ~(RWC_BITS|WZ_BITS); \
+	outw(status, port_addr)
+
+/* UHCI controllers don't automatically stop resume signalling after 20 msec,
+ * so we have to poll and check timeouts in order to take care of it.
+ */
+static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
+		unsigned long port_addr)
+{
+	int status;
+
+	if (test_bit(port, &uhci->suspended_ports)) {
+		CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
+		clear_bit(port, &uhci->suspended_ports);
+		clear_bit(port, &uhci->resuming_ports);
+		set_bit(port, &uhci->port_c_suspend);
+
+		/* The controller won't actually turn off the RD bit until
+		 * it has had a chance to send a low-speed EOP sequence,
+		 * which takes 3 bit times (= 2 microseconds).  We'll delay
+		 * slightly longer for good luck. */
+		udelay(4);
+	}
+}
+
+static void uhci_check_ports(struct uhci_hcd *uhci)
+{
+	unsigned int port;
+	unsigned long port_addr;
+	int status;
+
+	for (port = 0; port < uhci->rh_numports; ++port) {
+		port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
+		status = inw(port_addr);
+		if (unlikely(status & USBPORTSC_PR)) {
+			if (time_after_eq(jiffies, uhci->ports_timeout)) {
+				CLR_RH_PORTSTAT(USBPORTSC_PR);
+				udelay(10);
+
+				/* If the port was enabled before, turning
+				 * reset on caused a port enable change.
+				 * Turning reset off causes a port connect
+				 * status change.  Clear these changes. */
+				CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
+				SET_RH_PORTSTAT(USBPORTSC_PE);
+			}
+		}
+		if (unlikely(status & USBPORTSC_RD)) {
+			if (!test_bit(port, &uhci->resuming_ports)) {
+
+				/* Port received a wakeup request */
+				set_bit(port, &uhci->resuming_ports);
+				uhci->ports_timeout = jiffies +
+						msecs_to_jiffies(20);
+			} else if (time_after_eq(jiffies,
+						uhci->ports_timeout)) {
+				uhci_finish_suspend(uhci, port, port_addr);
+			}
+		}
+	}
+}
+
+/* size of returned buffer is part of USB spec */
+static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			u16 wIndex, char *buf, u16 wLength)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	int status, lstatus, retval = 0, len = 0;
+	unsigned int port = wIndex - 1;
+	unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
+	u16 wPortChange, wPortStatus;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uhci->lock, flags);
+	switch (typeReq) {
+
+	case GetHubStatus:
+		*(__le32 *)buf = cpu_to_le32(0);
+		OK(4);		/* hub power */
+	case GetPortStatus:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		uhci_check_ports(uhci);
+		status = inw(port_addr);
+
+		/* Intel controllers report the OverCurrent bit active on.
+		 * VIA controllers report it active off, so we'll adjust the
+		 * bit value.  (It's not standardized in the UHCI spec.)
+		 */
+		if (to_pci_dev(hcd->self.controller)->vendor ==
+				PCI_VENDOR_ID_VIA)
+			status ^= USBPORTSC_OC;
+
+		/* UHCI doesn't support C_RESET (always false) */
+		wPortChange = lstatus = 0;
+		if (status & USBPORTSC_CSC)
+			wPortChange |= USB_PORT_STAT_C_CONNECTION;
+		if (status & USBPORTSC_PEC)
+			wPortChange |= USB_PORT_STAT_C_ENABLE;
+		if (status & USBPORTSC_OCC)
+			wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
+
+		if (test_bit(port, &uhci->port_c_suspend)) {
+			wPortChange |= USB_PORT_STAT_C_SUSPEND;
+			lstatus |= 1;
+		}
+		if (test_bit(port, &uhci->suspended_ports))
+			lstatus |= 2;
+		if (test_bit(port, &uhci->resuming_ports))
+			lstatus |= 4;
+
+		/* UHCI has no power switching (always on) */
+		wPortStatus = USB_PORT_STAT_POWER;
+		if (status & USBPORTSC_CCS)
+			wPortStatus |= USB_PORT_STAT_CONNECTION;
+		if (status & USBPORTSC_PE) {
+			wPortStatus |= USB_PORT_STAT_ENABLE;
+			if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
+				wPortStatus |= USB_PORT_STAT_SUSPEND;
+		}
+		if (status & USBPORTSC_OC)
+			wPortStatus |= USB_PORT_STAT_OVERCURRENT;
+		if (status & USBPORTSC_PR)
+			wPortStatus |= USB_PORT_STAT_RESET;
+		if (status & USBPORTSC_LSDA)
+			wPortStatus |= USB_PORT_STAT_LOW_SPEED;
+
+		if (wPortChange)
+			dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
+					wIndex, status, lstatus);
+
+		*(__le16 *)buf = cpu_to_le16(wPortStatus);
+		*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
+		OK(4);
+	case SetHubFeature:		/* We don't implement these */
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			OK(0);
+		default:
+			goto err;
+		}
+		break;
+	case SetPortFeature:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			set_bit(port, &uhci->suspended_ports);
+			SET_RH_PORTSTAT(USBPORTSC_SUSP);
+			OK(0);
+		case USB_PORT_FEAT_RESET:
+			SET_RH_PORTSTAT(USBPORTSC_PR);
+
+			/* Reset terminates Resume signalling */
+			uhci_finish_suspend(uhci, port, port_addr);
+
+			/* USB v2.0 7.1.7.5 */
+			uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
+			OK(0);
+		case USB_PORT_FEAT_POWER:
+			/* UHCI has no power switching */
+			OK(0);
+		default:
+			goto err;
+		}
+		break;
+	case ClearPortFeature:
+		if (port >= uhci->rh_numports)
+			goto err;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			CLR_RH_PORTSTAT(USBPORTSC_PE);
+
+			/* Disable terminates Resume signalling */
+			uhci_finish_suspend(uhci, port, port_addr);
+			OK(0);
+		case USB_PORT_FEAT_C_ENABLE:
+			CLR_RH_PORTSTAT(USBPORTSC_PEC);
+			OK(0);
+		case USB_PORT_FEAT_SUSPEND:
+			if (test_bit(port, &uhci->suspended_ports) &&
+					!test_and_set_bit(port,
+						&uhci->resuming_ports)) {
+				SET_RH_PORTSTAT(USBPORTSC_RD);
+
+				/* The controller won't allow RD to be set
+				 * if the port is disabled.  When this happens
+				 * just skip the Resume signalling.
+				 */
+				if (!(inw(port_addr) & USBPORTSC_RD))
+					uhci_finish_suspend(uhci, port,
+							port_addr);
+				else
+					/* USB v2.0 7.1.7.7 */
+					uhci->ports_timeout = jiffies +
+						msecs_to_jiffies(20);
+			}
+			OK(0);
+		case USB_PORT_FEAT_C_SUSPEND:
+			clear_bit(port, &uhci->port_c_suspend);
+			OK(0);
+		case USB_PORT_FEAT_POWER:
+			/* UHCI has no power switching */
+			goto err;
+		case USB_PORT_FEAT_C_CONNECTION:
+			CLR_RH_PORTSTAT(USBPORTSC_CSC);
+			OK(0);
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			CLR_RH_PORTSTAT(USBPORTSC_OCC);
+			OK(0);
+		case USB_PORT_FEAT_C_RESET:
+			/* this driver won't report these */
+			OK(0);
+		default:
+			goto err;
+		}
+		break;
+	case GetHubDescriptor:
+		len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
+		memcpy(buf, root_hub_hub_des, len);
+		if (len > 2)
+			buf[2] = uhci->rh_numports;
+		OK(len);
+	default:
+err:
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&uhci->lock, flags);
+
+	return retval;
+}