Merge tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for 3.12-rc3.

  These are all for host controller issues that have been reported, and
  there's a fix for an annoying error message that gets printed every
  time you remove a USB 3 device from the system that's been bugging me
  for a while"

* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: add support for Merrifield
  USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
  USB: Fix breakage in ffs_fs_mount()
  fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
  usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
  usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
  usb: chipidea: udc: free pending TD at removal procedure
  usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
  usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
  usb: chipidea: udc: fix the oops after rmmod gadget
  USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
  USB: OHCI: accept very late isochronous URBs
  USB: UHCI: accept very late isochronous URBs
  USB: iMX21: accept very late isochronous URBs
  usbcore: check usb device's state before sending a Set SEL control transfer
  xhci: Fix race between ep halt and URB cancellation
  usb: Fix xHCI host issues on remote wakeup.
  xhci: Ensure a command structure points to the correct trb on the command ring
  xhci: Fix oops happening after address device timeout

1 files changed, 36 insertions, 11 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fae697ed0b70..773a6b28c4f1 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 		if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
 			xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
 	}
-	cmd->command_trb = xhci->cmd_ring->enqueue;
+	cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
 	list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
 	xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
 	xhci_ring_cmd_db(xhci);
@@ -552,11 +552,15 @@ void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
  *  - Mark a port as being done with device resume,
  *    and ring the endpoint doorbells.
  *  - Stop the Synopsys redriver Compliance Mode polling.
+ *  - Drop and reacquire the xHCI lock, in order to wait for port resume.
  */
 static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		struct xhci_bus_state *bus_state,
 		__le32 __iomem **port_array,
-		u16 wIndex, u32 raw_port_status)
+		u16 wIndex, u32 raw_port_status,
+		unsigned long flags)
+	__releases(&xhci->lock)
+	__acquires(&xhci->lock)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	u32 status = 0;
@@ -591,21 +595,42 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			return 0xffffffff;
 		if (time_after_eq(jiffies,
 					bus_state->resume_done[wIndex])) {
+			int time_left;
+
 			xhci_dbg(xhci, "Resume USB2 port %d\n",
 					wIndex + 1);
 			bus_state->resume_done[wIndex] = 0;
 			clear_bit(wIndex, &bus_state->resuming_ports);
+
+			set_bit(wIndex, &bus_state->rexit_ports);
 			xhci_set_link_state(xhci, port_array, wIndex,
 					XDEV_U0);
-			xhci_dbg(xhci, "set port %d resume\n",
-					wIndex + 1);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					wIndex + 1);
-			if (!slot_id) {
-				xhci_dbg(xhci, "slot_id is zero\n");
-				return 0xffffffff;
+
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			time_left = wait_for_completion_timeout(
+					&bus_state->rexit_done[wIndex],
+					msecs_to_jiffies(
+						XHCI_MAX_REXIT_TIMEOUT));
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			if (time_left) {
+				slot_id = xhci_find_slot_id_by_port(hcd,
+						xhci, wIndex + 1);
+				if (!slot_id) {
+					xhci_dbg(xhci, "slot_id is zero\n");
+					return 0xffffffff;
+				}
+				xhci_ring_device(xhci, slot_id);
+			} else {
+				int port_status = xhci_readl(xhci,
+						port_array[wIndex]);
+				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
+						XHCI_MAX_REXIT_TIMEOUT,
+						port_status);
+				status |= USB_PORT_STAT_SUSPEND;
+				clear_bit(wIndex, &bus_state->rexit_ports);
 			}
-			xhci_ring_device(xhci, slot_id);
+
 			bus_state->port_c_suspend |= 1 << wIndex;
 			bus_state->suspended_ports &= ~(1 << wIndex);
 		} else {
@@ -728,7 +753,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			break;
 		}
 		status = xhci_get_port_status(hcd, bus_state, port_array,
-				wIndex, temp);
+				wIndex, temp, flags);
 		if (status == 0xffffffff)
 			goto error;