Merge remote-tracking branch 'remotes/fslc/4.9-2.3.x-imx' into toradex_4.9-2.3.x-imx-next

Conflicts:
	sound/soc/codecs/sgtl5000.c
	sound/soc/fsl/imx-sgtl5000.c

1 files changed, 36 insertions, 27 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7c95779c7a0e..eb9535221800 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/log2.h>
 #include <linux/module.h>
@@ -47,7 +48,6 @@ static unsigned int quirks;
 module_param(quirks, uint, S_IRUGO);
 MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
 
-/* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
  * xhci_handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
@@ -64,18 +64,16 @@ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
 int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
 {
 	u32	result;
+	int	ret;
 
-	do {
-		result = readl(ptr);
-		if (result == ~(u32)0)		/* card removed */
-			return -ENODEV;
-		result &= mask;
-		if (result == done)
-			return 0;
-		udelay(1);
-		usec--;
-	} while (usec > 0);
-	return -ETIMEDOUT;
+	ret = readl_poll_timeout_atomic(ptr, result,
+					(result & mask) == done ||
+					result == U32_MAX,
+					1, usec);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
 }
 
 /*
@@ -764,11 +762,8 @@ void xhci_shutdown(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_shutdown completed - status = %x",
 			readl(&xhci->op_regs->status));
-
-	/* Yet another workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
-		pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot);
 }
+EXPORT_SYMBOL_GPL(xhci_shutdown);
 
 #ifdef CONFIG_PM
 static void xhci_save_registers(struct xhci_hcd *xhci)
@@ -939,7 +934,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
 int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 {
 	int			rc = 0;
-	unsigned int		delay = XHCI_MAX_HALT_USEC;
+	unsigned int		delay = XHCI_MAX_HALT_USEC * 2;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
 
@@ -991,7 +986,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	command |= CMD_CSS;
 	writel(command, &xhci->op_regs->command);
 	if (xhci_handshake(&xhci->op_regs->status,
-				STS_SAVE, 0, 10 * 1000)) {
+				STS_SAVE, 0, 20 * 1000)) {
 		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
@@ -1051,6 +1046,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		hibernated = true;
 
 	if (!hibernated) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
@@ -4192,7 +4199,6 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	pm_addr = port_array[port_num] + PORTPMSC;
 	pm_val = readl(pm_addr);
 	hlpm_addr = port_array[port_num] + PORTHLPMC;
-	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num + 1);
@@ -4204,6 +4210,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 			 * default one which works with mixed HIRD and BESL
 			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
 			 */
+			field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 			if ((field & USB_BESL_SUPPORT) &&
 			    (field & USB_BESL_BASELINE_VALID))
 				hird = USB_GET_BESL_BASELINE(field);
@@ -4530,12 +4537,12 @@ static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
 	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
 		desc, state, timeout);
 
-	/* If we found we can't enable hub-initiated LPM, or
+	/* If we found we can't enable hub-initiated LPM, and
 	 * the U1 or U2 exit latency was too high to allow
-	 * device-initiated LPM as well, just stop searching.
+	 * device-initiated LPM as well, then we will disable LPM
+	 * for this device, so stop searching any further.
 	 */
-	if (alt_timeout == USB3_LPM_DISABLED ||
-			alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+	if (alt_timeout == USB3_LPM_DISABLED) {
 		*timeout = alt_timeout;
 		return -E2BIG;
 	}
@@ -4646,10 +4653,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
 		if (intf->dev.driver) {
 			driver = to_usb_driver(intf->dev.driver);
 			if (driver && driver->disable_hub_initiated_lpm) {
-				dev_dbg(&udev->dev, "Hub-initiated %s disabled "
-						"at request of driver %s\n",
-						state_name, driver->name);
-				return xhci_get_timeout_no_hub_lpm(udev, state);
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
 			}
 		}