USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad card

ELAN's U132 is a USB to CardBus OHCI controller adapter,
    designed specifically for CardBus 3G data cards to
    function in machines without a CardBus slot.
The "ftdi-elan" module is a USB client driver, that detects
    a supported CardBus OHCI controller plugged into the
    U132 adapter and thereafter provides the conduit for
    for access by the "u132-hcd" module.
The "u132-hcd" module is a (cut-down OHCI) host controller
    that supports a single OHCI function of the CardBus 
    card inserted into the U132 adapter.

The problem with the initial implementation is that when
the CardBus card inserted into the U132 adapter has multiple
functions (and a CardBus card can support up to 4 functions),
it was the first function that was arbitrarily choosen.

The first batch of 3G cards tested, like the Merlin Qualcomm
V620, have two functions each supporting a seperate USB OHCI
host controller, of which it was that first function that is
wired up to the 3G modem.

Then along comes the Vodafone Mobile Connect 3G/GPRS data card,
aka "Option GT 3G Quad" as printed on it's rear or "Option N.V.
GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it
has the meaningful functionality in the second CardBus function.

That presents a problem because it was the "ftdi-elan" module
alone that knows how to communicate to the embedded CardBus slot
and the "u132-hcd" module alone that knows how to access the
pcmcia configuration and CardBus accessible memory space. And
of course, the information about attached (internally hardwired)
devices is contained within USB configuration embedded somewhere
within the CardBus card.

If only the "u132-hcd" module probe() interface could return a
result code that propagated back to the instigating function
platform_device_register() then the "ftdi-elan" module could
try an alternative CardBus function.     However in spite of
the recent changes to the drivers/base/ routines that moved 
device_attach() from bus_add_device() to bus_attach_device()
both of those routines lose the "failed to attach" 0 result
code and thus the calling routine, namely device_add() is
incapable of propaging the "failed to attach" condition back
to platform_device_add() and consequently back to the caller
of platform_device_register()

Experiments show that patching bus_attach_device() to return
ENODEV fails with the kernel locking up very early during
boot. But, however, if the patch is restricted to calls from
platform_device_add() then it does seem to work.

Unfortunately, until the kernel's drivers/base is properly
modified to propagate -ENODEV back to the caller of
platform_device_register(), it is necessary to "fix" the
"ftdi-elan" module by importing knowledge from the 
"u132-hcd" module. This is the reason for the duplicated
functionality introduced in this patch.

Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 32 insertions, 60 deletions

diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index a9d7119e3176..a7fa0d75567d 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -40,6 +40,7 @@
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
+#include <linux/pci_ids.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
@@ -210,15 +211,16 @@ struct u132 {
 * these cannot be inlines because we need the structure offset!!
 * Does anyone have a better way?????
 */
+#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \
+        offsetof(struct ohci_regs, member), 0, data);
+#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \
+        offsetof(struct ohci_regs, member), 0, data);
 #define u132_read_pcimem(u132, member, data) \
         usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
         ohci_regs, member), 0, data);
 #define u132_write_pcimem(u132, member, data) \
         usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
         ohci_regs, member), 0, data);
-#define u132_write_pcimem_byte(u132, member, data) \
-        usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
-        ohci_regs, member), 0x0e, data);
 static inline struct u132 *udev_to_u132(struct u132_udev *udev)
 {
         u8 udev_number = udev->udev_number;
@@ -1574,59 +1576,12 @@ static char *hcfs2string(int state)
         return "?";
 }
 
-static int u132_usb_reset(struct u132 *u132)
-{
-        int retval;
-        retval = u132_read_pcimem(u132, control, &u132->hc_control);
-        if (retval)
-                return retval;
-        u132->hc_control &= OHCI_CTRL_RWC;
-        retval = u132_write_pcimem(u132, control, u132->hc_control);
-        if (retval)
-                return retval;
-        return 0;
-}
-
 static int u132_init(struct u132 *u132)
 {
         int retval;
         u32 control;
         u132_disable(u132);
-        u132->next_statechange =
-                jiffies; /* SMM owns the HC? not for long! */  {
-                u32 control;
-                retval = u132_read_pcimem(u132, control, &control);
-                if (retval)
-                        return retval;
-                if (control & OHCI_CTRL_IR) {
-                        u32 temp = 50;
-                        retval = u132_write_pcimem(u132, intrenable,
-                                OHCI_INTR_OC);
-                        if (retval)
-                                return retval;
-                        retval = u132_write_pcimem_byte(u132, cmdstatus,
-                                OHCI_OCR);
-                        if (retval)
-                                return retval;
-                      check:{
-                                retval = u132_read_pcimem(u132, control,
-                                        &control);
-                                if (retval)
-                                        return retval;
-                        }
-                        if (control & OHCI_CTRL_IR) {
-                                msleep(10);
-                                if (--temp == 0) {
-                                        dev_err(&u132->platform_dev->dev, "USB "
-                                                "HC takeover failed!(BIOS/SMM b"
-                                                "ug) control=%08X\n", control);
-                                        return -EBUSY;
-                                }
-                                goto check;
-                        }
-                        u132_usb_reset(u132);
-                }
-        }
+        u132->next_statechange = jiffies;
         retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
         if (retval)
                 return retval;
@@ -1725,7 +1680,7 @@ static int u132_run(struct u132 *u132)
       retry:retval = u132_read_pcimem(u132, cmdstatus, &status);
         if (retval)
                 return retval;
-        retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR);
+        retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR);
         if (retval)
                 return retval;
       extra:{
@@ -1782,7 +1737,7 @@ static int u132_run(struct u132 *u132)
         retval = u132_write_pcimem(u132, control, u132->hc_control);
         if (retval)
                 return retval;
-        retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF);
+        retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF);
         if (retval)
                 return retval;
         retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
@@ -1839,8 +1794,8 @@ static void u132_hcd_stop(struct usb_hcd *hcd)
 {
         struct u132 *u132 = hcd_to_u132(hcd);
         if (u132->going > 1) {
-                dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-                        , u132->going);
+                dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b"
+                        "een removed %d\n", u132, hcd, u132->going);
         } else if (u132->going > 0) {
                 dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
                         "ed\n", hcd);
@@ -2545,8 +2500,9 @@ static void u132_endpoint_disable(struct usb_hcd *hcd,
 {
         struct u132 *u132 = hcd_to_u132(hcd);
         if (u132->going > 2) {
-                dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-                        , u132->going);
+                dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p"
+                        ") has been removed %d\n", u132, hcd, hep,
+                        u132->going);
         } else {
                 struct u132_endp *endp = hep->hcpriv;
                 if (endp)
@@ -2790,7 +2746,6 @@ static int u132_hub_status_data(struct usb_hcd *hcd, char *buf)
         } else if (u132->going > 0) {
                 dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
                         "ed\n", hcd);
-                dump_stack();
                 return -ESHUTDOWN;
         } else {
                 int i, changed = 0, length = 1;
@@ -3034,12 +2989,15 @@ static int __devexit u132_remove(struct platform_device *pdev)
         struct usb_hcd *hcd = platform_get_drvdata(pdev);
         if (hcd) {
                 struct u132 *u132 = hcd_to_u132(hcd);
-                dump_stack();
                 if (u132->going++ > 1) {
+                        dev_err(&u132->platform_dev->dev, "already being remove"
+				"d\n");
                         return -ENODEV;
                 } else {
                         int rings = MAX_U132_RINGS;
                         int endps = MAX_U132_ENDPS;
+                        dev_err(&u132->platform_dev->dev, "removing device u132"
+				".%d\n", u132->sequence_num);
                         msleep(100);
                         down(&u132->sw_lock);
                         u132_monitor_cancel_work(u132);
@@ -3121,10 +3079,24 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
 static int __devinit u132_probe(struct platform_device *pdev)
 {
         struct usb_hcd *hcd;
+        int retval;
+        u32 control;
+        u32 rh_a = -1;
+        u32 num_ports;
         msleep(100);
         if (u132_exiting > 0) {
                 return -ENODEV;
-        }                        /* refuse to confuse usbcore */
+        }
+        retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE);
+        if (retval)
+                return retval;
+        retval = ftdi_read_pcimem(pdev, control, &control);
+        if (retval)
+                return retval;
+        retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
+        if (retval)
+                return retval;
+        num_ports = rh_a & RH_A_NDP;        /* refuse to confuse usbcore */
         if (pdev->dev.dma_mask) {
                 return -EINVAL;
         }