usb: musb: switch dev_dbg to tracepoints

Switch dev_dbg() to tracepoint debug musb_dbg().

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 11 insertions, 11 deletions

diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 10d30afe4a3c..844a309fe895 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -206,7 +206,7 @@ static inline void musb_try_b_hnp_enable(struct musb *musb)
 	void __iomem	*mbase = musb->mregs;
 	u8		devctl;
 
-	dev_dbg(musb->controller, "HNP: Setting HR\n");
+	musb_dbg(musb, "HNP: Setting HR");
 	devctl = musb_readb(mbase, MUSB_DEVCTL);
 	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
 }
@@ -303,7 +303,7 @@ __acquires(musb->lock)
 				/* Maybe start the first request in the queue */
 				request = next_request(musb_ep);
 				if (!musb_ep->busy && request) {
-					dev_dbg(musb->controller, "restarting the request\n");
+					musb_dbg(musb, "restarting the request");
 					musb_ep_restart(musb, request);
 				}
 
@@ -550,7 +550,7 @@ static void ep0_txstate(struct musb *musb)
 
 	if (!req) {
 		/* WARN_ON(1); */
-		dev_dbg(musb->controller, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		musb_dbg(musb, "odd; csr0 %04x", musb_readw(regs, MUSB_CSR0));
 		return;
 	}
 
@@ -607,7 +607,7 @@ musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
 	/* NOTE:  earlier 2.6 versions changed setup packets to host
 	 * order, but now USB packets always stay in USB byte order.
 	 */
-	dev_dbg(musb->controller, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+	musb_dbg(musb, "SETUP req%02x.%02x v%04x i%04x l%d",
 		req->bRequestType,
 		req->bRequest,
 		le16_to_cpu(req->wValue),
@@ -675,7 +675,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 	csr = musb_readw(regs, MUSB_CSR0);
 	len = musb_readb(regs, MUSB_COUNT0);
 
-	dev_dbg(musb->controller, "csr %04x, count %d, ep0stage %s\n",
+	musb_dbg(musb, "csr %04x, count %d, ep0stage %s",
 			csr, len, decode_ep0stage(musb->ep0_state));
 
 	if (csr & MUSB_CSR0_P_DATAEND) {
@@ -752,7 +752,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 
 		/* enter test mode if needed (exit by reset) */
 		else if (musb->test_mode) {
-			dev_dbg(musb->controller, "entering TESTMODE\n");
+			musb_dbg(musb, "entering TESTMODE");
 
 			if (MUSB_TEST_PACKET == musb->test_mode_nr)
 				musb_load_testpacket(musb);
@@ -864,7 +864,7 @@ setup:
 				break;
 			}
 
-			dev_dbg(musb->controller, "handled %d, csr %04x, ep0stage %s\n",
+			musb_dbg(musb, "handled %d, csr %04x, ep0stage %s",
 				handled, csr,
 				decode_ep0stage(musb->ep0_state));
 
@@ -881,7 +881,7 @@ setup:
 			if (handled < 0) {
 				musb_ep_select(mbase, 0);
 stall:
-				dev_dbg(musb->controller, "stall (%d)\n", handled);
+				musb_dbg(musb, "stall (%d)", handled);
 				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
 				musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 finish:
@@ -961,7 +961,7 @@ musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
 		status = 0;
 		break;
 	default:
-		dev_dbg(musb->controller, "ep0 request queued in state %d\n",
+		musb_dbg(musb, "ep0 request queued in state %d",
 				musb->ep0_state);
 		status = -EINVAL;
 		goto cleanup;
@@ -970,7 +970,7 @@ musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
 	/* add request to the list */
 	list_add_tail(&req->list, &ep->req_list);
 
-	dev_dbg(musb->controller, "queue to %s (%s), length=%d\n",
+	musb_dbg(musb, "queue to %s (%s), length=%d",
 			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
 			req->request.length);
 
@@ -1063,7 +1063,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value)
 		musb->ackpend = 0;
 		break;
 	default:
-		dev_dbg(musb->controller, "ep0 can't halt in state %d\n", musb->ep0_state);
+		musb_dbg(musb, "ep0 can't halt in state %d", musb->ep0_state);
 		status = -EINVAL;
 	}