Merge tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.4-rc1.

  As usual, most of the changes are in the gadget subsystem, and we
  removed a host controller for a device that is no longer in existance,
  and probably never was even made public.  There is also other minor
  driver updates and new device ids, full details in the changelog.

  All of these have been in linux-next for a while"

* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
  USB: core: Codestyle fix in urb.c
  usb: misc: usb3503: Use i2c_add_driver helper macro
  usb: host: lpc32xx: don't unregister phy device
  usb: host: lpc32xx: balance clk enable/disable on removal
  usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
  uwb: drp: Use setup_timer
  uwb: neh: Use setup_timer
  uwb: rsv: Use setup_timer
  USB: qcserial: add Sierra Wireless MC74xx/EM74xx
  usb: chipidea: otg: don't wait vbus drops below BSV when starts host
  chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
  doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
  usb: chipidea: imx: add imx6ul usb support
  doc: dt-binding: ci-hdrc-usb2: improve property description
  usb: chipidea: imx: add usb support for imx7d
  Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
  usb: chipidea: Add support for 'phy-clkgate-delay-us' property
  usb: chipidea: Use extcon framework for VBUS and ID detect
  usb: gadget: net2280: restore ep_cfg after defect7374 workaround
  usb: dwc2: host: Fix use after free w/ simultaneous irqs
  ...

4 files changed, 48 insertions, 12 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4a518ff12310..ba13529cbd52 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1028,18 +1028,22 @@ void musb_start(struct musb *musb)
 {
 	void __iomem    *regs = musb->mregs;
 	u8              devctl = musb_readb(regs, MUSB_DEVCTL);
+	u8		power;
 
 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
 	musb_enable_interrupts(musb);
 	musb_writeb(regs, MUSB_TESTMODE, 0);
 
-	/* put into basic highspeed mode and start session */
-	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
-			| MUSB_POWER_HSENAB
-			/* ENSUSPEND wedges tusb */
-			/* | MUSB_POWER_ENSUSPEND */
-		   );
+	power = MUSB_POWER_ISOUPDATE;
+	/*
+	 * treating UNKNOWN as unspecified maximum speed, in which case
+	 * we will default to high-speed.
+	 */
+	if (musb->config->maximum_speed == USB_SPEED_HIGH ||
+			musb->config->maximum_speed == USB_SPEED_UNKNOWN)
+		power |= MUSB_POWER_HSENAB;
+	musb_writeb(regs, MUSB_POWER, power);
 
 	musb->is_active = 0;
 	devctl = musb_readb(regs, MUSB_DEVCTL);
@@ -1771,13 +1775,20 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
 	unsigned long	flags;
 	unsigned long	val;
 	int		vbus;
+	u8		devctl;
 
 	spin_lock_irqsave(&musb->lock, flags);
 	val = musb->a_wait_bcon;
-	/* FIXME get_vbus_status() is normally #defined as false...
-	 * and is effectively TUSB-specific.
-	 */
 	vbus = musb_platform_get_vbus_status(musb);
+	if (vbus < 0) {
+		/* Use default MUSB method by means of DEVCTL register */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS)
+				== (3 << MUSB_DEVCTL_VBUS_SHIFT))
+			vbus = 1;
+		else
+			vbus = 0;
+	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 4b886d0f6bdf..2337d7a7d62d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -579,7 +579,7 @@ static inline int  musb_platform_recover(struct musb *musb)
 static inline int musb_platform_get_vbus_status(struct musb *musb)
 {
 	if (!musb->ops->vbus_status)
-		return 0;
+		return -EINVAL;
 
 	return musb->ops->vbus_status(musb);
 }
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 84512d1d5eee..eeb7d9ecf7df 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -666,7 +666,7 @@ static int get_musb_port_mode(struct device *dev)
 {
 	enum usb_dr_mode mode;
 
-	mode = of_usb_get_dr_mode(dev->of_node);
+	mode = usb_get_dr_mode(dev);
 	switch (mode) {
 	case USB_DR_MODE_HOST:
 		return MUSB_PORT_MODE_HOST;
@@ -747,6 +747,19 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	if (!ret && val)
 		config->multipoint = true;
 
+	config->maximum_speed = usb_get_maximum_speed(&parent->dev);
+	switch (config->maximum_speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		break;
+	case USB_SPEED_SUPER:
+		dev_warn(dev, "ignore incorrect maximum_speed "
+				"(super-speed) setting in dts");
+		/* fall through */
+	default:
+		config->maximum_speed = USB_SPEED_HIGH;
+	}
+
 	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
 	if (ret) {
 		dev_err(dev, "failed to add platform_data\n");
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index f9f6304ad854..d9b0dc461439 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -341,6 +341,16 @@ static void sunxi_musb_disable(struct musb *musb)
 	clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags);
 }
 
+struct dma_controller *sunxi_musb_dma_controller_create(struct musb *musb,
+						    void __iomem *base)
+{
+	return NULL;
+}
+
+void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
+{
+}
+
 /*
  * sunxi musb register layout
  * 0x00 - 0x17	fifo regs, 1 long per fifo
@@ -566,6 +576,8 @@ static const struct musb_platform_ops sunxi_musb_ops = {
 	.writeb		= sunxi_musb_writeb,
 	.readw		= sunxi_musb_readw,
 	.writew		= sunxi_musb_writew,
+	.dma_init	= sunxi_musb_dma_controller_create,
+	.dma_exit	= sunxi_musb_dma_controller_destroy,
 	.set_vbus	= sunxi_musb_set_vbus,
 	.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
 	.post_root_reset_end = sunxi_musb_post_root_reset_end,
@@ -617,7 +629,7 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	memset(&pdata, 0, sizeof(pdata));
-	switch (of_usb_get_dr_mode(np)) {
+	switch (usb_get_dr_mode(&pdev->dev)) {
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
 	case USB_DR_MODE_HOST:
 		pdata.mode = MUSB_PORT_MODE_HOST;