Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 156 insertions, 24 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 90549382eba5..3a7fec957ca7 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -1,13 +1,74 @@
 #
 # Physical Layer USB driver configuration
 #
-comment "USB Physical Layer drivers"
-	depends on USB || USB_GADGET
+menuconfig USB_PHY
+	tristate "USB Physical Layer drivers"
+	help
+	  USB controllers (those which are host, device or DRD) need a
+	  device to handle the physical layer signalling, commonly called
+	  a PHY.
+
+	  The following drivers add support for such PHY devices.
+
+if USB_PHY
+
+#
+# USB Transceiver Drivers
+#
+config AB8500_USB
+	tristate "AB8500 USB Transceiver Driver"
+	depends on AB8500_CORE
+	help
+	  Enable this to support the USB OTG transceiver in AB8500 chip.
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config FSL_USB2_OTG
+	bool "Freescale USB OTG Transceiver Driver"
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+	select USB_OTG
+	help
+	  Enable this to support Freescale USB OTG transceiver.
+
+config ISP1301_OMAP
+	tristate "Philips ISP1301 with OMAP OTG"
+	depends on I2C && ARCH_OMAP_OTG
+	help
+	  If you say yes here you get support for the Philips ISP1301
+	  USB-On-The-Go transceiver working with the OMAP OTG controller.
+	  The ISP1301 is a full speed USB  transceiver which is used in
+	  products including H2, H3, and H4 development boards for Texas
+	  Instruments OMAP processors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called isp1301_omap.
+
+config MV_U3D_PHY
+	bool "Marvell USB 3.0 PHY controller Driver"
+	depends on CPU_MMP3
+	help
+	  Enable this to support Marvell USB 3.0 phy controller for Marvell
+	  SoC.
+
+config NOP_USB_XCEIV
+	tristate "NOP USB Transceiver Driver"
+	help
+	  This driver is to be used by all the usb transceiver which are either
+	  built-in with usb ip or which are autonomous and doesn't require any
+	  phy programming such as ISP1x04 etc.
+
+config OMAP_CONTROL_USB
+	tristate "OMAP CONTROL USB Driver"
+	help
+	  Enable this to add support for the USB part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY.
 
 config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
-	select USB_OTG_UTILS
 	select OMAP_CONTROL_USB
 	help
 	  Enable this to support the transceiver that is part of SOC. This
@@ -17,7 +78,6 @@ config OMAP_USB2
 
 config OMAP_USB3
 	tristate "OMAP USB3 PHY Driver"
-	select USB_OTG_UTILS
 	select OMAP_CONTROL_USB
 	help
 	  Enable this to support the USB3 PHY that is part of SOC. This
@@ -25,14 +85,55 @@ config OMAP_USB3
 	  This driver interacts with the "OMAP Control USB Driver" to power
 	  on/off the PHY.
 
-config OMAP_CONTROL_USB
-	tristate "OMAP CONTROL USB Driver"
+config SAMSUNG_USBPHY
+	tristate "Samsung USB PHY Driver"
 	help
-	  Enable this to add support for the USB part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY.
+	  Enable this to support Samsung USB phy helper driver for Samsung SoCs.
+	  This driver provides common interface to interact, for Samsung USB 2.0 PHY
+	  driver and later for Samsung USB 3.0 PHY driver.
+
+config SAMSUNG_USB2PHY
+	tristate "Samsung USB 2.0 PHY controller Driver"
+	select SAMSUNG_USBPHY
+	help
+	  Enable this to support Samsung USB 2.0 (High Speed) PHY controller
+	  driver for Samsung SoCs.
+
+config SAMSUNG_USB3PHY
+	tristate "Samsung USB 3.0 PHY controller Driver"
+	select SAMSUNG_USBPHY
+	help
+	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
+	  for samsung SoCs.
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	help
+	  Enable this to support the USB OTG transceiver on TWL4030
+	  family chips (including the TWL5030 and TPS659x0 devices).
+	  This transceiver supports high and full speed devices plus,
+	  in host mode, low speed.
+
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
+config USB_GPIO_VBUS
+	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
+	depends on GENERIC_GPIO
+	help
+	  Provides simple GPIO VBUS sensing for controllers with an
+	  internal transceiver via the usb_phy interface, and
+	  optionally control of a D+ pullup GPIO as well as a VBUS
+	  current limit regulator.
 
 config USB_ISP1301
 	tristate "NXP ISP1301 USB transceiver support"
@@ -47,18 +148,41 @@ config USB_ISP1301
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp1301.
 
-config MV_U3D_PHY
-	bool "Marvell USB 3.0 PHY controller Driver"
-	depends on USB_MV_U3D
-	select USB_OTG_UTILS
+config USB_MSM_OTG
+	tristate "OTG support for Qualcomm on-chip USB controller"
+	depends on (USB || USB_GADGET) && ARCH_MSM
 	help
-	  Enable this to support Marvell USB 3.0 phy controller for Marvell
-	  SoC.
+	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  handles PHY initialization, clock management, and workarounds
+	  required after resetting the hardware and power management.
+	  This driver is required even for peripheral only or host only
+	  mode configurations.
+	  This driver is not supported on boards like trout which
+	  has an external PHY.
+
+config USB_MV_OTG
+	tristate "Marvell USB OTG support"
+	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+	select USB_OTG
+	help
+	  Say Y here if you want to build Marvell USB OTG transciever
+	  driver in kernel (including PXA and MMP series). This driver
+	  implements role switch between EHCI host driver and gadget driver.
+
+	  To compile this driver as a module, choose M here.
+
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	depends on ARCH_MXC || ARCH_MXS
+	select STMP_DEVICE
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB phy support"
 	depends on USB || USB_GADGET
-	select USB_OTG_UTILS
 	help
 	  Say Y here to add support for the Renesas R-Car USB phy driver.
 	  This chip is typically used as USB phy for USB host, gadget.
@@ -67,10 +191,18 @@ config USB_RCAR_PHY
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-phy.
 
-config SAMSUNG_USBPHY
-	bool "Samsung USB PHY controller Driver"
-	depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
-	select USB_OTG_UTILS
+config USB_ULPI
+	bool "Generic ULPI Transceiver Driver"
+	depends on ARM
+	help
+	  Enable this to support ULPI connected USB OTG transceivers which
+	  are likely found on embedded boards.
+
+config USB_ULPI_VIEWPORT
+	bool
+	depends on USB_ULPI
 	help
-	  Enable this to support Samsung USB phy controller for samsung
-	  SoCs.
+	  Provides read/write operations to the ULPI phy register set for
+	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
+endif # USB_PHY