Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 294 insertions, 0 deletions

diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
new file mode 100644
index 000000000000..2b10cc969bbb
--- /dev/null
+++ b/drivers/usb/phy/phy-nop.c
@@ -0,0 +1,294 @@
+/*
+ * drivers/usb/otg/nop-usb-xceiv.c
+ *
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Current status:
+ *	This provides a "nop" transceiver for PHYs which are
+ *	autonomous such as isp1504, isp1707, etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+
+struct nop_usb_xceiv {
+	struct usb_phy phy;
+	struct device *dev;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct regulator *reset;
+};
+
+static struct platform_device *pd;
+
+void usb_nop_xceiv_register(void)
+{
+	if (pd)
+		return;
+	pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+	if (!pd) {
+		printk(KERN_ERR "Unable to register usb nop transceiver\n");
+		return;
+	}
+}
+EXPORT_SYMBOL(usb_nop_xceiv_register);
+
+void usb_nop_xceiv_unregister(void)
+{
+	platform_device_unregister(pd);
+	pd = NULL;
+}
+EXPORT_SYMBOL(usb_nop_xceiv_unregister);
+
+static int nop_set_suspend(struct usb_phy *x, int suspend)
+{
+	return 0;
+}
+
+static int nop_init(struct usb_phy *phy)
+{
+	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_enable(nop->vcc))
+			dev_err(phy->dev, "Failed to enable power\n");
+	}
+
+	if (!IS_ERR(nop->clk))
+		clk_enable(nop->clk);
+
+	if (!IS_ERR(nop->reset)) {
+		/* De-assert RESET */
+		if (regulator_enable(nop->reset))
+			dev_err(phy->dev, "Failed to de-assert reset\n");
+	}
+
+	return 0;
+}
+
+static void nop_shutdown(struct usb_phy *phy)
+{
+	struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev);
+
+	if (!IS_ERR(nop->reset)) {
+		/* Assert RESET */
+		if (regulator_disable(nop->reset))
+			dev_err(phy->dev, "Failed to assert reset\n");
+	}
+
+	if (!IS_ERR(nop->clk))
+		clk_disable(nop->clk);
+
+	if (!IS_ERR(nop->vcc)) {
+		if (regulator_disable(nop->vcc))
+			dev_err(phy->dev, "Failed to disable power\n");
+	}
+}
+
+static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!gadget) {
+		otg->gadget = NULL;
+		return -ENODEV;
+	}
+
+	otg->gadget = gadget;
+	otg->phy->state = OTG_STATE_B_IDLE;
+	return 0;
+}
+
+static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	if (!otg)
+		return -ENODEV;
+
+	if (!host) {
+		otg->host = NULL;
+		return -ENODEV;
+	}
+
+	otg->host = host;
+	return 0;
+}
+
+static int nop_usb_xceiv_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data;
+	struct nop_usb_xceiv	*nop;
+	enum usb_phy_type	type = USB_PHY_TYPE_USB2;
+	int err;
+	u32 clk_rate = 0;
+	bool needs_vcc = false;
+	bool needs_reset = false;
+
+	nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg),
+							GFP_KERNEL);
+	if (!nop->phy.otg)
+		return -ENOMEM;
+
+	if (dev->of_node) {
+		struct device_node *node = dev->of_node;
+
+		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+			clk_rate = 0;
+
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_reset = of_property_read_bool(node, "reset-supply");
+
+	} else if (pdata) {
+		type = pdata->type;
+		clk_rate = pdata->clk_rate;
+		needs_vcc = pdata->needs_vcc;
+		needs_reset = pdata->needs_reset;
+	}
+
+	nop->clk = devm_clk_get(&pdev->dev, "main_clk");
+	if (IS_ERR(nop->clk)) {
+		dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n",
+					PTR_ERR(nop->clk));
+	}
+
+	if (!IS_ERR(nop->clk) && clk_rate) {
+		err = clk_set_rate(nop->clk, clk_rate);
+		if (err) {
+			dev_err(&pdev->dev, "Error setting clock rate\n");
+			return err;
+		}
+	}
+
+	if (!IS_ERR(nop->clk)) {
+		err = clk_prepare(nop->clk);
+		if (err) {
+			dev_err(&pdev->dev, "Error preparing clock\n");
+			return err;
+		}
+	}
+
+	nop->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(nop->vcc)) {
+		dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
+					PTR_ERR(nop->vcc));
+		if (needs_vcc)
+			return -EPROBE_DEFER;
+	}
+
+	nop->reset = devm_regulator_get(&pdev->dev, "reset");
+	if (IS_ERR(nop->reset)) {
+		dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
+					PTR_ERR(nop->reset));
+		if (needs_reset)
+			return -EPROBE_DEFER;
+	}
+
+	nop->dev		= &pdev->dev;
+	nop->phy.dev		= nop->dev;
+	nop->phy.label		= "nop-xceiv";
+	nop->phy.set_suspend	= nop_set_suspend;
+	nop->phy.init		= nop_init;
+	nop->phy.shutdown	= nop_shutdown;
+	nop->phy.state		= OTG_STATE_UNDEFINED;
+	nop->phy.type		= type;
+
+	nop->phy.otg->phy		= &nop->phy;
+	nop->phy.otg->set_host		= nop_set_host;
+	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+
+	err = usb_add_phy_dev(&nop->phy);
+	if (err) {
+		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+			err);
+		goto err_add;
+	}
+
+	platform_set_drvdata(pdev, nop);
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier);
+
+	return 0;
+
+err_add:
+	if (!IS_ERR(nop->clk))
+		clk_unprepare(nop->clk);
+	return err;
+}
+
+static int nop_usb_xceiv_remove(struct platform_device *pdev)
+{
+	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
+
+	if (!IS_ERR(nop->clk))
+		clk_unprepare(nop->clk);
+
+	usb_remove_phy(&nop->phy);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id nop_xceiv_dt_ids[] = {
+	{ .compatible = "usb-nop-xceiv" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
+
+static struct platform_driver nop_usb_xceiv_driver = {
+	.probe		= nop_usb_xceiv_probe,
+	.remove		= nop_usb_xceiv_remove,
+	.driver		= {
+		.name	= "nop_usb_xceiv",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(nop_xceiv_dt_ids),
+	},
+};
+
+static int __init nop_usb_xceiv_init(void)
+{
+	return platform_driver_register(&nop_usb_xceiv_driver);
+}
+subsys_initcall(nop_usb_xceiv_init);
+
+static void __exit nop_usb_xceiv_exit(void)
+{
+	platform_driver_unregister(&nop_usb_xceiv_driver);
+}
+module_exit(nop_usb_xceiv_exit);
+
+MODULE_ALIAS("platform:nop_usb_xceiv");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");