USB: ark3116: Formatting cleanups

Formatting only.

Signed-off-by: Werner Lemberg <wl@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 99 insertions, 100 deletions

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index d37300e1811a..ca52f12f0e24 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -46,10 +46,10 @@ static inline void ARK3116_SND(struct usb_serial *serial, int seq,
 {
 	int result;
 	result = usb_control_msg(serial->dev,
-				 usb_sndctrlpipe(serial->dev,0),
+				 usb_sndctrlpipe(serial->dev, 0),
 				 request, requesttype, value, index,
-				 NULL,0x00, 1000);
-	dbg("%03d > ok",seq);
+				 NULL, 0x00, 1000);
+	dbg("%03d > ok", seq);
 }
 
 static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
@@ -59,27 +59,25 @@ static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
 {
 	int result;
 	result = usb_control_msg(serial->dev,
-			      usb_rcvctrlpipe(serial->dev,0),
-			      request, requesttype, value, index,
-			      buf, 0x0000001, 1000);
+				 usb_rcvctrlpipe(serial->dev, 0),
+				 request, requesttype, value, index,
+				 buf, 0x0000001, 1000);
 	if (result)
-		dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+		dbg("%03d < %d bytes [0x%02X]", seq, result, buf[0]);
 	else
 		dbg("%03d < 0 bytes", seq);
 }
 
-
 static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
 				     __u8 request, __u8 requesttype,
 				     __u16 value, __u16 index, char *buf)
 {
 	usb_control_msg(serial->dev,
-			usb_rcvctrlpipe(serial->dev,0),
+			usb_rcvctrlpipe(serial->dev, 0),
 			request, requesttype, value, index,
 			buf, 0x0000001, 1000);
 }
 
-
 static int ark3116_attach(struct usb_serial *serial)
 {
 	char *buf;
@@ -87,10 +85,10 @@ static int ark3116_attach(struct usb_serial *serial)
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+		priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL);
 		if (!priv)
 			goto cleanup;
-		memset (priv, 0x00, sizeof (struct ark3116_private));
+		memset(priv, 0x00, sizeof (struct ark3116_private));
 		spin_lock_init(&priv->lock);
 
 		usb_set_serial_port_data(serial->port[i], priv);
@@ -98,63 +96,62 @@ static int ark3116_attach(struct usb_serial *serial)
 
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
-		dbg("error kmalloc -> out of mem ?");
+		dbg("error kmalloc -> out of mem?");
 		goto cleanup;
 	}
 
 	/* 3 */
-	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
-	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
-	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
-	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+	ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
+	ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
+	ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
+	ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
 
 	/* <-- seq7 */
-	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
-	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
-	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
-	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
-	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+	ARK3116_RCV(serial,  7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+	ARK3116_SND(serial,  8, 0xFE, 0x40, 0x0080, 0x0003);
+	ARK3116_SND(serial,  9, 0xFE, 0x40, 0x001A, 0x0000);
+	ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001);
+	ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003);
 
 	/* <-- seq12 */
-	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
-	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+	ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
+	ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004);
 
 	/* 14 */
-	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
-	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+	ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
+	ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004);
 
 	/* 16 */
-	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 	/* --> seq17 */
-	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+	ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004);
 
 	/* <-- seq18 */
-	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+	ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
 
 	/* --> seq19 */
-	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
-
+	ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004);
 
 	/* <-- seq20 */
-	/* seems like serial port status info (RTS, CTS,...) */
-	/* returns modem control line status ?! */
-	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
-
-	/* set 9600 baud & do some init ?! */
-	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
-	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
-	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
-	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
-	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
-	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
-	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
-	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+	/* seems like serial port status info (RTS, CTS, ...) */
+	/* returns modem control line status?! */
+	ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
+
+	/* set 9600 baud & do some init?! */
+	ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
+	ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
+	ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
+	ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
+	ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+	ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
+	ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+	ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003);
 
 	kfree(buf);
-	return(0);
+	return 0;
 
 cleanup:
-	for (--i; i>=0; --i)
+	for (--i; i >= 0; --i)
 		usb_set_serial_port_data(serial->port[i], NULL);
 	return -ENOMEM;
 }
@@ -183,7 +180,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		port->tty->termios->c_cflag = B9600 | CS8
+					      | CREAD | HUPCL | CLOCAL;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -207,8 +205,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	}
 
 	/* set data bit count (8/7/6/5) */
-	if (cflag & CSIZE){
-		switch (cflag & CSIZE){
+	if (cflag & CSIZE) {
+		switch (cflag & CSIZE) {
 		case CS5:
 			config |= 0x00;
 			dbg("setting CS5");
@@ -222,7 +220,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 			dbg("setting CS7");
 			break;
 		default:
-			err ("CSIZE was set but not CS5-CS8, using CS8!");
+			err("CSIZE was set but not CS5-CS8, using CS8!");
+			/* fall through */
 		case CS8:
 			config |= 0x03;
 			dbg("setting CS8");
@@ -230,8 +229,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 		}
 	}
 
-	/* set parity (NONE,EVEN,ODD) */
-	if (cflag & PARENB){
+	/* set parity (NONE/EVEN/ODD) */
+	if (cflag & PARENB) {
 		if (cflag & PARODD) {
 			config |= 0x08;
 			dbg("setting parity to ODD");
@@ -243,20 +242,19 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 		dbg("setting parity to NONE");
 	}
 
-	/* SET STOPBIT (1/2) */
+	/* set stop bit (1/2) */
 	if (cflag & CSTOPB) {
 		config |= 0x04;
-		dbg ("setting 2 stop bits");
+		dbg("setting 2 stop bits");
 	} else {
-		dbg ("setting 1 stop bit");
+		dbg("setting 1 stop bit");
 	}
 
-
-	/* set baudrate: */
+	/* set baudrate */
 	baud = 0;
-	switch (cflag & CBAUD){
+	switch (cflag & CBAUD) {
 		case B0:
-			err("can't set 0baud, using 9600 instead");
+			err("can't set 0 baud, using 9600 instead");
 			break;
 		case B75:	baud = 75;	break;
 		case B150:	baud = 150;	break;
@@ -288,38 +286,40 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	 */
 	if (baud == 460800)
 		/* strange, for 460800 the formula is wrong
-		 * (dont use round(), then 9600baud is wrong) */
+		 * if using round() then 9600baud is wrong) */
 		ark3116_baud = 7;
 	else
 		ark3116_baud = 3000000 / baud;
 
 	/* ? */
-	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+	ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf);
+
 	/* offset = buf[0]; */
 	/* offset = 0x03; */
-	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
-
+	/* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */
 
 	/* set baudrate */
-	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
-	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
-	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
-	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
-	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+	dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud);
+	ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
+	ARK3116_SND(serial, 148, 0xFE, 0x40,
+			    (ark3116_baud & 0x00FF), 0x0000);
+	ARK3116_SND(serial, 149, 0xFE, 0x40,
+			    (ark3116_baud & 0xFF00) >> 8, 0x0001);
+	ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
 
 	/* ? */
-	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
-	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+	ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+	ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
 
 	/* set data bit count, stop bit count & parity: */
 	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
-	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
-	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+	ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+	ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003);
 
 	if (cflag & CRTSCTS)
-		dbg("CRTSCTS not supported by chipset ?!");
+		dbg("CRTSCTS not supported by chipset?!");
 
-	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+	/* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
 
 	kfree(buf);
 	return;
@@ -332,11 +332,11 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 	char *buf;
 	int result = 0;
 
-	dbg("%s -  port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
-		dbg("error kmalloc -> out of mem ?");
+		dbg("error kmalloc -> out of mem?");
 		return -ENOMEM;
 	}
 
@@ -345,38 +345,37 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 		return result;
 
 	/* open */
-	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+	ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
 
-	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
-	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
-	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
-	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+	ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003);
+	ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000);
+	ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001);
+	ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003);
 
-	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
-	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+	ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+	ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004);
 
-	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
-	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+	ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf);
+	ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004);
 
-	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
 
-	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+	ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004);
 
-	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+	ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
 
-	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+	ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004);
 
-	/* returns different values (control lines ?!) */
-	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+	/* returns different values (control lines?!) */
+	ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
 
-	/* initialise termios: */
+	/* initialise termios */
 	if (port->tty)
 		ark3116_set_termios(port, &tmp_termios);
 
 	kfree(buf);
 
 	return result;
-
 }
 
 static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
@@ -417,7 +416,7 @@ static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
 	char *buf;
 	char temp;
 
-	/* seems like serial port status info (RTS, CTS,...) is stored
+	/* seems like serial port status info (RTS, CTS, ...) is stored
 	 * in reg(?) 0x0006
 	 * pcb connection point 11 = GND -> sets bit4 of response
 	 * pcb connection point  7 = GND -> sets bit6 of response
@@ -429,16 +428,16 @@ static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
 		return -ENOMEM;
 	}
 
-	/* read register: */
-	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+	/* read register */
+	ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
 	temp = buf[0];
 	kfree(buf);
 
-	/* i do not really know if bit4=CTS and bit6=DSR... was just a
-	 * quick guess !!
+	/* i do not really know if bit4=CTS and bit6=DSR... just a
+	 * quick guess!
 	 */
-	return  (temp & (1<<4) ? TIOCM_CTS : 0) |
-	        (temp & (1<<6) ? TIOCM_DSR : 0);
+	return (temp & (1<<4) ? TIOCM_CTS : 0)
+	       | (temp & (1<<6) ? TIOCM_DSR : 0);
 }
 
 static struct usb_driver ark3116_driver = {