Merge tag 'v4.4.73' into toradex_vf_4.4-nextColibri-VF_LXDE-Image_2.7b3-20170630

This is the 4.4.73 stable release

13 files changed, 169 insertions, 77 deletions

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 7812052dc700..754fc3e41005 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -373,23 +373,29 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_dbg(&port->dev,
 			"%s - usb_serial_generic_open failed: %d\n",
 			__func__, result);
-		goto err_out;
+		goto err_free;
 	}
 
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
 	/* read modem status */
-	priv->msr = ark3116_read_reg(serial, UART_MSR, buf);
+	result = ark3116_read_reg(serial, UART_MSR, buf);
+	if (result < 0)
+		goto err_close;
+	priv->msr = *buf;
+
 	/* read line status */
-	priv->lsr = ark3116_read_reg(serial, UART_LSR, buf);
+	result = ark3116_read_reg(serial, UART_LSR, buf);
+	if (result < 0)
+		goto err_close;
+	priv->lsr = *buf;
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "submit irq_in urb failed %d\n",
 			result);
-		ark3116_close(port);
-		goto err_out;
+		goto err_close;
 	}
 
 	/* activate interrupts */
@@ -402,8 +408,15 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ark3116_set_termios(tty, port, NULL);
 
-err_out:
 	kfree(buf);
+
+	return 0;
+
+err_close:
+	usb_serial_generic_close(port);
+err_free:
+	kfree(buf);
+
 	return result;
 }
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index e0b1fe2f60e1..be93b9ff2d98 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1399,25 +1399,30 @@ static int digi_read_inb_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct digi_port *priv = usb_get_serial_port_data(port);
-	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
-	int len = ((unsigned char *)urb->transfer_buffer)[1];
-	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
-	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
+	unsigned char *buf = urb->transfer_buffer;
+	int opcode;
+	int len;
+	int port_status;
+	unsigned char *data;
 	int flag, throttled;
-	int status = urb->status;
-
-	/* do not process callbacks on closed ports */
-	/* but do continue the read chain */
-	if (urb->status == -ENOENT)
-		return 0;
 
 	/* short/multiple packet check */
+	if (urb->actual_length < 2) {
+		dev_warn(&port->dev, "short packet received\n");
+		return -1;
+	}
+
+	opcode = buf[0];
+	len = buf[1];
+
 	if (urb->actual_length != len + 2) {
-		dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
-			"status=%d, port=%d, opcode=%d, len=%d, "
-			"actual_length=%d, status=%d\n", __func__, status,
-			priv->dp_port_num, opcode, len, urb->actual_length,
-			port_status);
+		dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
+			priv->dp_port_num, opcode, len, urb->actual_length);
+		return -1;
+	}
+
+	if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
+		dev_err(&port->dev, "malformed data packet received\n");
 		return -1;
 	}
 
@@ -1431,6 +1436,9 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* receive data */
 	if (opcode == DIGI_CMD_RECEIVE_DATA) {
+		port_status = buf[2];
+		data = &buf[3];
+
 		/* get flag from port_status */
 		flag = 0;
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 19a98116c2ab..e0385d6c0abb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
 	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
 	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
@@ -873,6 +873,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
 					USB_CLASS_VENDOR_SPEC,
 					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -1439,10 +1440,13 @@ static int read_latency_timer(struct usb_serial_port *port)
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
 			     buf, 1, WDR_TIMEOUT);
-	if (rv < 0)
+	if (rv < 1) {
 		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
-	else
+		if (rv >= 0)
+			rv = -EIO;
+	} else {
 		priv->latency = buf[0];
+	}
 
 	kfree(buf);
 
@@ -1504,9 +1508,9 @@ static int set_serial_info(struct tty_struct *tty,
 					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
+check_and_exit:
 	write_latency_timer(port);
 
-check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) {
 		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 48ee04c94a75..4fcf1cecb6d7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -873,9 +873,17 @@
 #define	FIC_VID			0x1457
 #define	FIC_NEO1973_DEBUG_PID	0x5118
 
+/*
+ * Actel / Microsemi
+ */
+#define ACTEL_VID				0x1514
+#define MICROSEMI_ARROW_SF2PLUS_BOARD_PID	0x2008
+
 /* Olimex */
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_TINY_PID	0x0004
+#define OLIMEX_ARM_USB_TINY_H_PID	0x002a
 #define OLIMEX_ARM_USB_OCD_H_PID	0x002b
 
 /*
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index b63a6c3899c5..749e1b674145 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -492,20 +492,24 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 	int result;
 	struct usb_serial *serial = ep->serial;
 	struct edgeport_product_info *product_info = &ep->product_info;
-	struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
+	struct edge_compatibility_descriptor *epic;
 	struct edge_compatibility_bits *bits;
 	struct device *dev = &serial->dev->dev;
 
 	ep->is_epic = 0;
+
+	epic = kmalloc(sizeof(*epic), GFP_KERNEL);
+	if (!epic)
+		return -ENOMEM;
+
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				 USB_REQUEST_ION_GET_EPIC_DESC,
 				 0xC0, 0x00, 0x00,
-				 &ep->epic_descriptor,
-				 sizeof(struct edge_compatibility_descriptor),
+				 epic, sizeof(*epic),
 				 300);
-
-	if (result > 0) {
+	if (result == sizeof(*epic)) {
 		ep->is_epic = 1;
+		memcpy(&ep->epic_descriptor, epic, sizeof(*epic));
 		memset(product_info, 0, sizeof(struct edgeport_product_info));
 
 		product_info->NumPorts = epic->NumPorts;
@@ -534,8 +538,16 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 		dev_dbg(dev, "  IOSPWriteLCR     : %s\n", bits->IOSPWriteLCR	? "TRUE": "FALSE");
 		dev_dbg(dev, "  IOSPSetBaudRate  : %s\n", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
 		dev_dbg(dev, "  TrueEdgeport     : %s\n", bits->TrueEdgeport	? "TRUE": "FALSE");
+
+		result = 0;
+	} else if (result >= 0) {
+		dev_warn(&serial->interface->dev, "short epic descriptor received: %d\n",
+			 result);
+		result = -EIO;
 	}
 
+	kfree(epic);
+
 	return result;
 }
 
@@ -2097,8 +2109,7 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
  * rom_read
  *	reads a number of bytes from the Edgeport device starting at the given
  *	address.
- *	If successful returns the number of bytes read, otherwise it returns
- *	a negative error number of the problem.
+ *	Returns zero on success or a negative error number.
  ****************************************************************************/
 static int rom_read(struct usb_serial *serial, __u16 extAddr,
 					__u16 addr, __u16 length, __u8 *data)
@@ -2123,12 +2134,17 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
 					USB_REQUEST_ION_READ_ROM,
 					0xC0, addr, extAddr, transfer_buffer,
 					current_length, 300);
-		if (result < 0)
+		if (result < current_length) {
+			if (result >= 0)
+				result = -EIO;
 			break;
+		}
 		memcpy(data, transfer_buffer, current_length);
 		length -= current_length;
 		addr += current_length;
 		data += current_length;
+
+		result = 0;
 	}
 
 	kfree(transfer_buffer);
@@ -2585,9 +2601,10 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
 				EDGE_MANUF_DESC_LEN,
 				(__u8 *)(&edge_serial->manuf_descriptor));
 
-	if (response < 1)
-		dev_err(dev, "error in getting manufacturer descriptor\n");
-	else {
+	if (response < 0) {
+		dev_err(dev, "error in getting manufacturer descriptor: %d\n",
+				response);
+	} else {
 		char string[30];
 		dev_dbg(dev, "**Manufacturer Descriptor\n");
 		dev_dbg(dev, "  RomSize:        %dK\n",
@@ -2644,9 +2661,10 @@ static void get_boot_desc(struct edgeport_serial *edge_serial)
 				EDGE_BOOT_DESC_LEN,
 				(__u8 *)(&edge_serial->boot_descriptor));
 
-	if (response < 1)
-		dev_err(dev, "error in getting boot descriptor\n");
-	else {
+	if (response < 0) {
+		dev_err(dev, "error in getting boot descriptor: %d\n",
+				response);
+	} else {
 		dev_dbg(dev, "**Boot Descriptor:\n");
 		dev_dbg(dev, "  BootCodeLength: %d\n",
 			le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
@@ -2789,7 +2807,7 @@ static int edge_startup(struct usb_serial *serial)
 	dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
 
 	/* Read the epic descriptor */
-	if (get_epic_descriptor(edge_serial) <= 0) {
+	if (get_epic_descriptor(edge_serial) < 0) {
 		/* memcpy descriptor to Supports structures */
 		memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
 		       sizeof(struct edge_compatibility_bits));
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index f1a8fdcd8674..e98532feb0cc 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2349,8 +2349,11 @@ static void change_port_settings(struct tty_struct *tty,
 	if (!baud) {
 		/* pick a default, any default... */
 		baud = 9600;
-	} else
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
 		tty_encode_baud_rate(tty, baud, baud);
+	}
 
 	edge_port->baud_rate = baud;
 	config->wBaudRate = (__u16)((461550L + baud/2) / baud);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 930be98d59b3..6b0942428917 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -139,6 +139,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
+	unsigned int len = urb->actual_length;
 	int retval;
 	int status = urb->status;
 	struct keyspan_pda_private *priv;
@@ -159,18 +160,26 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 		goto exit;
 	}
 
+	if (len < 1) {
+		dev_warn(&port->dev, "short message received\n");
+		goto exit;
+	}
+
 	/* see if the message is data or a status interrupt */
 	switch (data[0]) {
 	case 0:
 		 /* rest of message is rx data */
-		if (urb->actual_length) {
-			tty_insert_flip_string(&port->port, data + 1,
-						urb->actual_length - 1);
-			tty_flip_buffer_push(&port->port);
-		}
+		if (len < 2)
+			break;
+		tty_insert_flip_string(&port->port, data + 1, len - 1);
+		tty_flip_buffer_push(&port->port);
 		break;
 	case 1:
 		/* status interrupt */
+		if (len < 3) {
+			dev_warn(&port->dev, "short interrupt message received\n");
+			break;
+		}
 		dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
 		switch (data[1]) {
 		case 1: /* modemline change */
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 89726f702202..a6c07c6be25f 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 		return -ENOMEM;
 
 	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
-	put_unaligned_le32(cpu_to_le32(divisor), buf);
+	put_unaligned_le32(divisor, buf);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_BAUD_RATE_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,
@@ -322,8 +322,12 @@ static int mct_u232_get_modem_stat(struct usb_serial_port *port,
 			MCT_U232_GET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0) {
+	if (rc < MCT_U232_GET_MODEM_STAT_SIZE) {
 		dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
+
+		if (rc >= 0)
+			rc = -EIO;
+
 		*msr = 0;
 	} else {
 		*msr = buf[0];
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index af67a0de6b5d..3bf61acfc26b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
+#define TELIT_PRODUCT_ME910			0x1100
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
 #define TELIT_PRODUCT_LE910_USBCFG4		0x1206
@@ -640,6 +641,11 @@ static const struct option_blacklist_info simcom_sim7100e_blacklist = {
 	.reserved = BIT(5) | BIT(6),
 };
 
+static const struct option_blacklist_info telit_me910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(3),
+};
+
 static const struct option_blacklist_info telit_le910_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(2),
@@ -1235,6 +1241,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 38b3f0d8cd58..fd509ed6cf70 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x9071)},	/* Sierra Wireless MC74xx */
 	{DEVICE_SWI(0x1199, 0x9078)},	/* Sierra Wireless EM74xx */
 	{DEVICE_SWI(0x1199, 0x9079)},	/* Sierra Wireless EM74xx */
+	{DEVICE_SWI(0x1199, 0x907a)},	/* Sierra Wireless EM74xx QDL */
+	{DEVICE_SWI(0x1199, 0x907b)},	/* Sierra Wireless EM74xx */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index a3ed07c58754..af0c87276299 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -188,22 +188,22 @@ static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
 }
 
 
-static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
-{
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
-			       data, 3, QT2_USB_TIMEOUT);
-}
-
 static inline int qt2_getregister(struct usb_device *dev,
 				  u8 uart,
 				  u8 reg,
 				  u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_REGISTER, 0xc0, reg,
-			       uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+	if (ret < sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
 
+	return ret;
 }
 
 static inline int qt2_setregister(struct usb_device *dev,
@@ -372,9 +372,11 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 0xc0, 0,
 				 device_port, data, 2, QT2_USB_TIMEOUT);
 
-	if (status < 0) {
+	if (status < 2) {
 		dev_err(&port->dev, "%s - open port failed %i\n", __func__,
 			status);
+		if (status >= 0)
+			status = -EIO;
 		kfree(data);
 		return status;
 	}
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 70a098de429f..886e1294b120 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -80,9 +80,17 @@ static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
 
 static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
-			       data, 3, 300);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			      data, 3, 300);
+	if (ret < 3) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
 }
 
 static inline int ssu100_getregister(struct usb_device *dev,
@@ -90,10 +98,17 @@ static inline int ssu100_getregister(struct usb_device *dev,
 				     unsigned short reg,
 				     u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_REGISTER, 0xc0, reg,
-			       uart, data, sizeof(*data), 300);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), 300);
+	if (ret < sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
 
+	return ret;
 }
 
 
@@ -289,8 +304,10 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 QT_OPEN_CLOSE_CHANNEL,
 				 QT_TRANSFER_IN, 0x01,
 				 0, data, 2, 300);
-	if (result < 0) {
+	if (result < 2) {
 		dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
+		if (result >= 0)
+			result = -EIO;
 		kfree(data);
 		return result;
 	}
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 535fcfafc097..fe7f5ace6064 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1352,13 +1352,10 @@ static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 		(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
 		value, moduleid, data, size, 1000);
 
-	if (status == size)
-		status = 0;
-
-	if (status > 0)
-		status = -ECOMM;
+	if (status < 0)
+		return status;
 
-	return status;
+	return 0;
 }
 
 
@@ -1374,8 +1371,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 
 	if (status == size)
 		status = 0;
-
-	if (status > 0)
+	else if (status >= 0)
 		status = -ECOMM;
 
 	return status;