diff options
author | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2018-09-27 18:38:51 +0200 |
---|---|---|
committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2018-09-27 18:38:51 +0200 |
commit | 570911528badd8877fb4dba2a89aeef4af09c5b4 (patch) | |
tree | 55bba10c2b25a77f0fe3e1a436115cb9721d754c /drivers/usb | |
parent | 929b34b825fd42d83d5cea66125966b99e429b1e (diff) | |
parent | 9fbcdd1319b481591803d29a458add4cf79e5431 (diff) |
Merge tag 'v4.4.158' into HEAD
This is the 4.4.158 stable release
Diffstat (limited to 'drivers/usb')
30 files changed, 188 insertions, 59 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index edd8ef4ee502..a501f3ba6a3f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1698,6 +1698,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x11ca, 0x0201), /* VeriFone Mx870 Gadget Serial */ .driver_info = SINGLE_RX_URB, }, + { USB_DEVICE(0x1965, 0x0018), /* Uniden UBC125XLT */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, @@ -1768,6 +1771,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 61ea87917433..4380e4f600ab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -453,7 +453,7 @@ static int clear_wdm_read_flag(struct wdm_device *desc) set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); - rv = usb_submit_urb(desc->response, GFP_KERNEL); + rv = usb_submit_urb(desc->response, GFP_ATOMIC); spin_lock_irq(&desc->iuspin); if (rv) { dev_err(&desc->intf->dev, diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 40378487e023..a5e3e410db4e 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -529,8 +529,6 @@ static int resume_common(struct device *dev, int event) event == PM_EVENT_RESTORE); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); - if (hcd->shared_hcd) - usb_hc_died(hcd->shared_hcd); usb_hc_died(hcd); } } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4d86da0df131..2facffea2ee0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1123,10 +1123,14 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (!udev || udev->state == USB_STATE_NOTATTACHED) { /* Tell hub_wq to disconnect the device or - * check for a new connection + * check for a new connection or over current condition. + * Based on USB2.0 Spec Section 11.12.5, + * C_PORT_OVER_CURRENT could be set while + * PORT_OVER_CURRENT is not. So check for any of them. */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || - (portstatus & USB_PORT_STAT_OVERCURRENT)) + (portstatus & USB_PORT_STAT_OVERCURRENT) || + (portchange & USB_PORT_STAT_C_OVERCURRENT)) set_bit(port1, hub->change_bits); } else if (portstatus & USB_PORT_STAT_ENABLE) { @@ -3304,6 +3308,10 @@ static int wait_for_ss_port_enable(struct usb_device *udev, while (delay_ms < 2000) { if (status || *portstatus & USB_PORT_STAT_CONNECTION) break; + if (!port_is_power_on(hub, *portstatus)) { + status = -ENODEV; + break; + } msleep(20); delay_ms += 20; status = hub_port_status(hub, *port1, portstatus, portchange); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 29adabdb305f..08cba309eb78 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1282,6 +1282,11 @@ void usb_enable_interface(struct usb_device *dev, * is submitted that needs that bandwidth. Some other operating systems * allocate bandwidth early, when a configuration is chosen. * + * xHCI reserves bandwidth and configures the alternate setting in + * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting + * may be disabled. Drivers cannot rely on any particular alternate + * setting being in effect after a failure. + * * This call is synchronous, and may not be used in an interrupt context. * Also, drivers must not change altsettings while urbs are scheduled for * endpoints in that interface; all such urbs must first be completed @@ -1317,6 +1322,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) alternate); return -EINVAL; } + /* + * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth, + * including freeing dropped endpoint ring buffers. + * Make sure the interface endpoints are flushed before that + */ + usb_disable_interface(dev, iface, false); /* Make sure we have enough bandwidth for this alternate interface. * Remove the current alt setting and add the new alt setting. diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 40ce175655e6..37a5e07b3488 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */ + { USB_DEVICE(0x0218, 0x0201), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* WORLDE easy key (easykey.25) MIDI controller */ { USB_DEVICE(0x0218, 0x0401), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -231,6 +235,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair Strafe */ + { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, @@ -255,6 +263,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* DJI CineSSD */ + { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 98705b83d2dc..842c1ae7a291 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3657,9 +3657,11 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) } ret = usb_add_gadget_udc(dev, &hsotg->gadget); - if (ret) + if (ret) { + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, + hsotg->ctrl_req); return ret; - + } dwc2_hsotg_dump(hsotg); return 0; @@ -3672,6 +3674,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { usb_del_gadget_udc(&hsotg->gadget); + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req); return 0; } diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index bda0b21b850f..51866f3f2052 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -931,9 +931,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, DWC2_HC_XFER_COMPLETE, NULL); - if (!len) { + if (!len && !qtd->isoc_split_offset) { qtd->complete_split = 0; - qtd->isoc_split_offset = 0; return 0; } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index eb445c2ab15e..58f5fbdb6959 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1619,6 +1619,8 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (w_value && !f->get_alt) break; + + spin_lock(&cdev->lock); value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { DBG(cdev, @@ -1628,6 +1630,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) DBG(cdev, "delayed_status count %d\n", cdev->delayed_status); } + spin_unlock(&cdev->lock); break; case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 4191feb765b1..4800bb22cdd6 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3037,7 +3037,7 @@ static int ffs_func_setup(struct usb_function *f, __ffs_event_add(ffs, FUNCTIONFS_SETUP); spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); - return USB_GADGET_DELAYED_STATUS; + return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0; } static void ffs_func_suspend(struct usb_function *f) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index b5dab103be38..e931c3cb0840 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -941,14 +941,14 @@ static struct usb_descriptor_header *hs_audio_desc[] = { }; struct cntrl_cur_lay3 { - __u32 dCUR; + __le32 dCUR; }; struct cntrl_range_lay3 { - __u16 wNumSubRanges; - __u32 dMIN; - __u32 dMAX; - __u32 dRES; + __le16 wNumSubRanges; + __le32 dMIN; + __le32 dMAX; + __le32 dRES; } __packed; static inline void @@ -1296,9 +1296,9 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) - c.dCUR = p_srate; + c.dCUR = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - c.dCUR = c_srate; + c.dCUR = cpu_to_le32(c_srate); value = min_t(unsigned, w_length, sizeof c); memcpy(req->buf, &c, value); @@ -1336,15 +1336,15 @@ in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { if (entity_id == USB_IN_CLK_ID) - r.dMIN = p_srate; + r.dMIN = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - r.dMIN = c_srate; + r.dMIN = cpu_to_le32(c_srate); else return -EOPNOTSUPP; r.dMAX = r.dMIN; r.dRES = 0; - r.wNumSubRanges = 1; + r.wNumSubRanges = cpu_to_le16(1); value = min_t(unsigned, w_length, sizeof r); memcpy(req->buf, &r, value); diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index a47de8c31ce9..8efeadf30b4d 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -1542,11 +1542,14 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); } else { writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); - stop_activity(dev, dev->driver); + stop_activity(dev, NULL); } spin_unlock_irqrestore(&dev->lock, flags); + if (!is_on && dev->driver) + dev->driver->disconnect(&dev->gadget); + return 0; } @@ -2425,8 +2428,11 @@ static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver) nuke(&dev->ep[i]); /* report disconnect; the driver is already quiesced */ - if (driver) + if (driver) { + spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } usb_reinit(dev); } @@ -3272,6 +3278,8 @@ next_endpoints: BIT(PCI_RETRY_ABORT_INTERRUPT)) static void handle_stat1_irqs(struct net2280 *dev, u32 stat) +__releases(dev->lock) +__acquires(dev->lock) { struct net2280_ep *ep; u32 tmp, num, mask, scratch; @@ -3312,12 +3320,14 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) if (disconnect || reset) { stop_activity(dev, dev->driver); ep0_start(dev); + spin_unlock(&dev->lock); if (reset) usb_gadget_udc_reset (&dev->gadget, dev->driver); else (dev->driver->disconnect) (&dev->gadget); + spin_lock(&dev->lock); return; } } @@ -3336,6 +3346,7 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT); if (stat & tmp) { writel(tmp, &dev->regs->irqstat1); + spin_unlock(&dev->lock); if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) { if (dev->driver->suspend) dev->driver->suspend(&dev->gadget); @@ -3346,6 +3357,7 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) dev->driver->resume(&dev->gadget); /* at high speed, note erratum 0133 */ } + spin_lock(&dev->lock); stat &= ~tmp; } diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index baa0609a429d..e34094647603 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -835,11 +835,11 @@ static void init_controller(struct r8a66597 *r8a66597) r8a66597_bset(r8a66597, XCKE, SYSCFG0); - msleep(3); + mdelay(3); r8a66597_bset(r8a66597, PLLC, SYSCFG0); - msleep(1); + mdelay(1); r8a66597_bset(r8a66597, SCKE, SYSCFG0); @@ -1193,7 +1193,7 @@ __acquires(r8a66597->lock) r8a66597->ep0_req->length = 2; /* AV: what happens if we get called again before that gets through? */ spin_unlock(&r8a66597->lock); - r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_KERNEL); + r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_ATOMIC); spin_lock(&r8a66597->lock); } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 692ccc69345e..d5434e7a3b2e 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2565,7 +2565,7 @@ static int u132_get_frame(struct usb_hcd *hcd) } else { int frame = 0; dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n"); - msleep(100); + mdelay(100); return frame; } } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index e4cf3322bcb3..0ec809a35a3f 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -638,7 +638,7 @@ struct xhci_ring *xhci_stream_id_to_ring( if (!ep->stream_info) return NULL; - if (stream_id > ep->stream_info->num_streams) + if (stream_id >= ep->stream_info->num_streams) return NULL; return ep->stream_info->stream_rings[stream_id]; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f2e9f59c90d6..9dbf1583bd7a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -887,6 +887,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) spin_unlock_irqrestore(&xhci->lock, flags); } +static bool xhci_pending_portevent(struct xhci_hcd *xhci) +{ + __le32 __iomem **port_array; + int port_index; + u32 status; + u32 portsc; + + status = readl(&xhci->op_regs->status); + if (status & STS_EINT) + return true; + /* + * Checking STS_EINT is not enough as there is a lag between a change + * bit being set and the Port Status Change Event that it generated + * being written to the Event Ring. See note in xhci 1.1 section 4.19.2. + */ + + port_index = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + while (port_index--) { + portsc = readl(port_array[port_index]); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + port_index = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + while (port_index--) { + portsc = readl(port_array[port_index]); + if (portsc & PORT_CHANGE_MASK || + (portsc & PORT_PLS_MASK) == XDEV_RESUME) + return true; + } + return false; +} + /* * Stop HC (not bus-specific) * @@ -983,7 +1018,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend); */ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { - u32 command, temp = 0, status; + u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; @@ -1017,8 +1052,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); + /* + * Some controllers take up to 55+ ms to complete the controller + * restore so setting the timeout to 100ms. Xhci specification + * doesn't mention any timeout value. + */ if (xhci_handshake(&xhci->op_regs->status, - STS_RESTORE, 0, 10 * 1000)) { + STS_RESTORE, 0, 100 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -1105,8 +1145,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) done: if (retval == 0) { /* Resume root hubs only when have pending events. */ - status = readl(&xhci->op_regs->status); - if (status & STS_EINT) { + if (xhci_pending_portevent(xhci)) { usb_hcd_resume_root_hub(xhci->shared_hcd); usb_hcd_resume_root_hub(hcd); } @@ -3636,6 +3675,9 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) } spin_lock_irqsave(&xhci->lock, flags); + + virt_dev->udev = NULL; + /* Don't disable the slot if the host controller is dead. */ state = readl(&xhci->op_regs->status); if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) || diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 1715705acc59..84d8871755b7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -382,6 +382,10 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + /* Cold Attach Status - xHC can set this bit to report device attached during * Sx state. Warm port reset should be perfomed to clear this bit and move port * to connected state. diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 442b6631162e..3d750671b85a 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -388,7 +388,7 @@ static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned ch mask &= 0x0f; val &= 0x0f; d = (priv->reg[1] & (~mask)) ^ val; - if (set_1284_register(pp, 2, d, GFP_KERNEL)) + if (set_1284_register(pp, 2, d, GFP_ATOMIC)) return 0; priv->reg[1] = d; return d & 0xf; @@ -398,7 +398,7 @@ static unsigned char parport_uss720_read_status(struct parport *pp) { unsigned char ret; - if (get_1284_register(pp, 1, &ret, GFP_KERNEL)) + if (get_1284_register(pp, 1, &ret, GFP_ATOMIC)) return 0; return ret & 0xf8; } diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 343fa6ff9f4b..e8e8702d5adf 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -414,8 +414,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct usb_yurex *dev; - int retval = 0; - int bytes_read = 0; + int len = 0; char in_buffer[20]; unsigned long flags; @@ -423,26 +422,16 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, mutex_lock(&dev->io_mutex); if (!dev->interface) { /* already disconnected */ - retval = -ENODEV; - goto exit; + mutex_unlock(&dev->io_mutex); + return -ENODEV; } spin_lock_irqsave(&dev->lock, flags); - bytes_read = snprintf(in_buffer, 20, "%lld\n", dev->bbu); + len = snprintf(in_buffer, 20, "%lld\n", dev->bbu); spin_unlock_irqrestore(&dev->lock, flags); - - if (*ppos < bytes_read) { - if (copy_to_user(buffer, in_buffer + *ppos, bytes_read - *ppos)) - retval = -EFAULT; - else { - retval = bytes_read - *ppos; - *ppos += bytes_read; - } - } - -exit: mutex_unlock(&dev->io_mutex); - return retval; + + return simple_read_from_buffer(buffer, count, ppos, in_buffer, len); } static ssize_t yurex_write(struct file *file, const char __user *user_buffer, @@ -450,13 +439,13 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, { struct usb_yurex *dev; int i, set = 0, retval = 0; - char buffer[16]; + char buffer[16 + 1]; char *data = buffer; unsigned long long c, c2 = 0; signed long timeout = 0; DEFINE_WAIT(wait); - count = min(sizeof(buffer), count); + count = min(sizeof(buffer) - 1, count); dev = file->private_data; /* verify that we actually have some data to write */ @@ -475,6 +464,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, retval = -EFAULT; goto error; } + buffer[count] = 0; memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE); switch (buffer[0]) { diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 94eb2923afed..85d031ce85c1 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -879,6 +879,7 @@ int usb_otg_start(struct platform_device *pdev) if (pdata->init && pdata->init(pdev) != 0) return -EINVAL; +#ifdef CONFIG_PPC32 if (pdata->big_endian_mmio) { _fsl_readl = _fsl_readl_be; _fsl_writel = _fsl_writel_be; @@ -886,6 +887,7 @@ int usb_otg_start(struct platform_device *pdev) _fsl_readl = _fsl_readl_le; _fsl_writel = _fsl_writel_le; } +#endif /* request irq */ p_otg->irq = platform_get_irq(pdev, 0); @@ -976,7 +978,7 @@ int usb_otg_start(struct platform_device *pdev) /* * state file in sysfs */ -static int show_fsl_usb2_otg_state(struct device *dev, +static ssize_t show_fsl_usb2_otg_state(struct device *dev, struct device_attribute *attr, char *buf) { struct otg_fsm *fsm = &fsl_otg_dev->fsm; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 71133d96f97d..f73ea14e8173 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -118,7 +118,7 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - if (r < bufsize) { + if (r < (int)bufsize) { if (r >= 0) { dev_err(&dev->dev, "short control message received (%d < %u)\n", diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e7a051386b32..97382301c393 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -91,6 +91,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */ + { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ @@ -108,6 +111,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */ + { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */ + { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ @@ -120,7 +126,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ + { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */ { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */ + { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -130,17 +138,24 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */ + { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */ + { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */ + { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h index 1bd67b24f916..bc9ff5ebd67c 100644 --- a/drivers/usb/serial/io_ti.h +++ b/drivers/usb/serial/io_ti.h @@ -178,7 +178,7 @@ struct ump_interrupt { } __attribute__((packed)); -#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01) #define TIUMP_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) #define TIUMP_INTERRUPT_CODE_LSR 0x03 #define TIUMP_INTERRUPT_CODE_MSR 0x04 diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 6b0942428917..8a4047de43dc 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -373,8 +373,10 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, 0, 0, data, 1, 2000); - if (rc >= 0) + if (rc == 1) *value = *data; + else if (rc >= 0) + rc = -EIO; kfree(data); return rc; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index ed883a7ad533..58ba6904a087 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -482,6 +482,9 @@ static void mos7840_control_callback(struct urb *urb) } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + if (urb->actual_length < 1) + goto out; + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, mos7840_port->MsrLsr, mos7840_port->port_num); data = urb->transfer_buffer; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d982c455e18e..2b81939fecd7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -199,6 +199,8 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ #define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ +#define DELL_PRODUCT_5821E 0x81d7 + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -1033,6 +1035,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E), + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 07d1ecd564f7..8960a46c83bb 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -790,9 +790,9 @@ static void sierra_close(struct usb_serial_port *port) kfree(urb->transfer_buffer); usb_free_urb(urb); usb_autopm_put_interface_async(serial->interface); - spin_lock(&portdata->lock); + spin_lock_irq(&portdata->lock); portdata->outstanding_urbs--; - spin_unlock(&portdata->lock); + spin_unlock_irq(&portdata->lock); } sierra_stop_rx_urbs(port); diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 98f35c656c02..0cd247f75b8b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -227,7 +227,7 @@ struct ti_interrupt { } __attribute__((packed)); /* Interrupt codes */ -#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TI_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01) #define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) #define TI_CODE_HARDWARE_ERROR 0xFF #define TI_CODE_DATA_ERROR 0x03 diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index dba51362d2e2..6c186b4df94a 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -341,6 +341,15 @@ static int queuecommand_lck(struct scsi_cmnd *srb, return 0; } + if ((us->fflags & US_FL_NO_ATA_1X) && + (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) { + memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); + srb->result = SAM_STAT_CHECK_CONDITION; + done(srb); + return 0; + } + /* enqueue the command and wake up the control thread */ srb->scsi_done = done; us->srb = srb; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1a34d2a89de6..898215cad351 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2213,6 +2213,13 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */ +UNUSUAL_DEV( 0x2ca3, 0x0031, 0x0000, 0x9999, + "DJI", + "CineSSD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* * Nick Bowler <nbowler@elliptictech.com> * SCSI stack spams (otherwise harmless) error messages. |