summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-05-28 11:35:41 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-05-28 11:35:41 -0700
commit357d596ea7bea5abf1479cc72ae5888c738717dd (patch)
treec61ad0150643091c406e4f35bed769bebffcabc9 /drivers/usb
parentc624fa5e0ec09c99bff0ab7759fea55bb00d36c6 (diff)
Revert "usb: gadget: net2280: Add support for PLX USB338X"
This reverts commit c4128cac3557ddd5fa972cb6511c426cd94a7ccd. This should come through Felipe's tree first, and there was a bunch of other patches that are needed after this one as well that I didn't have. Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/Kconfig10
-rw-r--r--drivers/usb/gadget/net2280.c1115
-rw-r--r--drivers/usb/gadget/net2280.h97
3 files changed, 91 insertions, 1131 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 49e434ec527d..ba18e9c110cc 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -409,7 +409,7 @@ config USB_NET2272_DMA
If unsure, say "N" here. The driver works fine in PIO mode.
config USB_NET2280
- tristate "NetChip 228x / PLX USB338x"
+ tristate "NetChip 228x"
depends on PCI
help
NetChip 2280 / 2282 is a PCI based USB peripheral controller which
@@ -419,14 +419,6 @@ config USB_NET2280
(for control transfers) and several endpoints with dedicated
functions.
- PLX 3380 / 3382 is a PCIe based USB peripheral controller which
- supports full, high speed USB 2.0 and super speed USB 3.0
- data transfers.
-
- It has eight configurable endpoints, as well as endpoint zero
- (for control transfers) and several endpoints with dedicated
- functions.
-
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "net2280" and force all
gadget drivers to also be dynamically linked.
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 87789c9bf7fe..300b3a71383b 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -18,9 +18,6 @@
* hint to completely eliminate some IRQs, if a later IRQ is guaranteed
* and DMA chaining is enabled.
*
- * MSI is enabled by default. The legacy IRQ is used if MSI couldn't
- * be enabled.
- *
* Note that almost all the errata workarounds here are only needed for
* rev1 chips. Rev1a silicon (0110) fixes almost all of them.
*/
@@ -28,14 +25,10 @@
/*
* Copyright (C) 2003 David Brownell
* Copyright (C) 2003-2005 PLX Technology, Inc.
- * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
*
* Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility
* with 2282 chip
*
- * Modified Ricardo Ribalda Qtechnology AS to provide compatibility
- * with usb 338x chip. Based on PLX driver
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -68,8 +61,9 @@
#include <asm/irq.h>
#include <asm/unaligned.h>
-#define DRIVER_DESC "PLX NET228x/USB338x USB Peripheral Controller"
-#define DRIVER_VERSION "2005 Sept 27/v3.0"
+
+#define DRIVER_DESC "PLX NET228x USB Peripheral Controller"
+#define DRIVER_VERSION "2005 Sept 27"
#define EP_DONTUSE 13 /* nonzero */
@@ -79,12 +73,11 @@
static const char driver_name [] = "net2280";
static const char driver_desc [] = DRIVER_DESC;
-static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 };
static const char ep0name [] = "ep0";
static const char *const ep_name [] = {
ep0name,
"ep-a", "ep-b", "ep-c", "ep-d",
- "ep-e", "ep-f", "ep-g", "ep-h",
+ "ep-e", "ep-f",
};
/* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO)
@@ -97,12 +90,11 @@ static const char *const ep_name [] = {
*/
static bool use_dma = 1;
static bool use_dma_chaining = 0;
-static bool use_msi = 1;
/* "modprobe net2280 use_dma=n" etc */
module_param (use_dma, bool, S_IRUGO);
module_param (use_dma_chaining, bool, S_IRUGO);
-module_param(use_msi, bool, S_IRUGO);
+
/* mode 0 == ep-{a,b,c,d} 1K fifo each
* mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
@@ -156,9 +148,6 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
struct net2280_ep *ep;
u32 max, tmp;
unsigned long flags;
- static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };
- static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
- 0x50, 0x20, 0x70, 0x40, 0x90 };
ep = container_of (_ep, struct net2280_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
@@ -172,20 +161,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE)
return -EDOM;
- if (dev->pdev->vendor == 0x10b5) {
- if ((desc->bEndpointAddress & 0x0f) >= 0x0c)
- return -EDOM;
- ep->is_in = !!usb_endpoint_dir_in(desc);
- if (dev->enhanced_mode && ep->is_in && ep_key[ep->num])
- return -EINVAL;
- }
-
/* sanity check ep-e/ep-f since their fifos are small */
max = usb_endpoint_maxp (desc) & 0x1fff;
- if (ep->num > 4 && max > 64 && (dev->pdev->vendor == 0x17cc))
+ if (ep->num > 4 && max > 64)
return -ERANGE;
-
spin_lock_irqsave (&dev->lock, flags);
_ep->maxpacket = max & 0x7ff;
ep->desc = desc;
@@ -196,8 +176,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
ep->out_overflow = 0;
/* set speed-dependent max packet; may kick in high bandwidth */
- set_idx_reg(dev->regs, (dev->enhanced_mode) ? ep_enhanced[ep->num]
- : REG_EP_MAXPKT(dev, ep->num), max);
+ set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max);
/* FIFO lines can't go to different packets. PIO is ok, so
* use it instead of troublesome (non-bulk) multi-packet DMA.
@@ -220,43 +199,23 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
&ep->regs->ep_rsp);
} else if (tmp == USB_ENDPOINT_XFER_BULK) {
/* catch some particularly blatant driver bugs */
- if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) ||
- (dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
- (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
- spin_unlock_irqrestore(&dev->lock, flags);
+ if ((dev->gadget.speed == USB_SPEED_HIGH
+ && max != 512)
+ || (dev->gadget.speed == USB_SPEED_FULL
+ && max > 64)) {
+ spin_unlock_irqrestore (&dev->lock, flags);
return -ERANGE;
}
}
ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0;
- /* Enable this endpoint */
- if (dev->pdev->vendor == 0x17cc) {
- tmp <<= ENDPOINT_TYPE;
- tmp |= desc->bEndpointAddress;
- /* default full fifo lines */
- tmp |= (4 << ENDPOINT_BYTE_COUNT);
- tmp |= 1 << ENDPOINT_ENABLE;
- ep->is_in = (tmp & USB_DIR_IN) != 0;
- } else {
- /* In Legacy mode, only OUT endpoints are used */
- if (dev->enhanced_mode && ep->is_in) {
- tmp <<= IN_ENDPOINT_TYPE;
- tmp |= (1 << IN_ENDPOINT_ENABLE);
- /* Not applicable to Legacy */
- tmp |= (1 << ENDPOINT_DIRECTION);
- } else {
- tmp <<= OUT_ENDPOINT_TYPE;
- tmp |= (1 << OUT_ENDPOINT_ENABLE);
- tmp |= (ep->is_in << ENDPOINT_DIRECTION);
- }
-
- tmp |= usb_endpoint_num(desc);
- tmp |= (ep->ep.maxburst << MAX_BURST_SIZE);
- }
-
- /* Make sure all the registers are written before ep_rsp*/
- wmb();
+ tmp <<= ENDPOINT_TYPE;
+ tmp |= desc->bEndpointAddress;
+ tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */
+ tmp |= 1 << ENDPOINT_ENABLE;
+ wmb ();
/* for OUT transfers, block the rx fifo until a read is posted */
+ ep->is_in = (tmp & USB_DIR_IN) != 0;
if (!ep->is_in)
writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
else if (dev->pdev->device != 0x2280) {
@@ -267,13 +226,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
| (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
}
- writel(tmp, &ep->cfg->ep_cfg);
+ writel (tmp, &ep->regs->ep_cfg);
/* enable irqs */
if (!ep->dma) { /* pio, per-packet */
- tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num)
- : (1 << ep_bit[ep->num]);
- tmp |= readl(&dev->regs->pciirqenb0);
+ tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0);
writel (tmp, &dev->regs->pciirqenb0);
tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
@@ -294,10 +251,8 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE);
writel (tmp, &ep->regs->ep_irqenb);
- tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num)
- : (1 << ep_bit[ep->num]);
- tmp |= readl(&dev->regs->pciirqenb0);
- writel(tmp, &dev->regs->pciirqenb0);
+ tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0);
+ writel (tmp, &dev->regs->pciirqenb0);
}
}
@@ -331,8 +286,7 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec)
static const struct usb_ep_ops net2280_ep_ops;
-static void ep_reset_228x(struct net2280_regs __iomem *regs,
- struct net2280_ep *ep)
+static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
{
u32 tmp;
@@ -407,55 +361,6 @@ static void ep_reset_228x(struct net2280_regs __iomem *regs,
/* fifo size is handled separately */
}
-static void ep_reset_338x(struct net2280_regs __iomem *regs,
- struct net2280_ep *ep)
-{
- u32 tmp, dmastat;
-
- ep->desc = NULL;
- INIT_LIST_HEAD(&ep->queue);
-
- usb_ep_set_maxpacket_limit(&ep->ep, ~0);
- ep->ep.ops = &net2280_ep_ops;
-
- /* disable the dma, irqs, endpoint... */
- if (ep->dma) {
- writel(0, &ep->dma->dmactl);
- writel((1 << DMA_ABORT_DONE_INTERRUPT) |
- (1 << DMA_PAUSE_DONE_INTERRUPT) |
- (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) |
- (1 << DMA_TRANSACTION_DONE_INTERRUPT)
- /* | (1 << DMA_ABORT) */
- , &ep->dma->dmastat);
-
- dmastat = readl(&ep->dma->dmastat);
- if (dmastat == 0x5002) {
- WARNING(ep->dev, "The dmastat return = %x!!\n",
- dmastat);
- writel(0x5a, &ep->dma->dmastat);
- }
-
- tmp = readl(&regs->pciirqenb0);
- tmp &= ~(1 << ep_bit[ep->num]);
- writel(tmp, &regs->pciirqenb0);
- } else {
- if (ep->num < 5) {
- tmp = readl(&regs->pciirqenb1);
- tmp &= ~(1 << (8 + ep->num)); /* completion */
- writel(tmp, &regs->pciirqenb1);
- }
- }
- writel(0, &ep->regs->ep_irqenb);
-
- writel((1 << SHORT_PACKET_OUT_DONE_INTERRUPT) |
- (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) |
- (1 << FIFO_OVERFLOW) |
- (1 << DATA_PACKET_RECEIVED_INTERRUPT) |
- (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) |
- (1 << DATA_OUT_PING_TOKEN_INTERRUPT) |
- (1 << DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat);
-}
-
static void nuke (struct net2280_ep *);
static int net2280_disable (struct usb_ep *_ep)
@@ -469,17 +374,13 @@ static int net2280_disable (struct usb_ep *_ep)
spin_lock_irqsave (&ep->dev->lock, flags);
nuke (ep);
-
- if (ep->dev->pdev->vendor == 0x10b5)
- ep_reset_338x(ep->dev->regs, ep);
- else
- ep_reset_228x(ep->dev->regs, ep);
+ ep_reset (ep->dev->regs, ep);
VDEBUG (ep->dev, "disabled %s %s\n",
ep->dma ? "dma" : "pio", _ep->name);
/* synch memory views with the device */
- (void)readl(&ep->cfg->ep_cfg);
+ (void) readl (&ep->regs->ep_cfg);
if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4)
ep->dma = &ep->dev->dma [ep->num - 1];
@@ -797,8 +698,6 @@ static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
writel (readl (&dma->dmastat), &dma->dmastat);
writel (td_dma, &dma->dmadesc);
- if (ep->dev->pdev->vendor == 0x10b5)
- dmactl |= (0x01 << DMA_REQUEST_OUTSTANDING);
writel (dmactl, &dma->dmactl);
/* erratum 0116 workaround part 3: pci arbiter away from net2280 */
@@ -873,21 +772,6 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req)
start_queue (ep, tmp, req->td_dma);
}
-static inline void resume_dma(struct net2280_ep *ep)
-{
- writel(readl(&ep->dma->dmactl) | (1 << DMA_ENABLE), &ep->dma->dmactl);
-
- ep->dma_started = true;
-}
-
-static inline void ep_stop_dma(struct net2280_ep *ep)
-{
- writel(readl(&ep->dma->dmactl) & ~(1 << DMA_ENABLE), &ep->dma->dmactl);
- spin_stop_dma(ep->dma);
-
- ep->dma_started = false;
-}
-
static inline void
queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid)
{
@@ -990,23 +874,8 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* kickstart this i/o queue? */
if (list_empty (&ep->queue) && !ep->stopped) {
- /* DMA request while EP halted */
- if (ep->dma &&
- (readl(&ep->regs->ep_rsp) & (1 << CLEAR_ENDPOINT_HALT)) &&
- (dev->pdev->vendor == 0x10b5)) {
- int valid = 1;
- if (ep->is_in) {
- int expect;
- expect = likely(req->req.zero ||
- ((req->req.length %
- ep->ep.maxpacket) != 0));
- if (expect != ep->in_fifo_validate)
- valid = 0;
- }
- queue_dma(ep, req, valid);
- }
/* use DMA if the endpoint supports it, else pio */
- else if (ep->dma)
+ if (ep->dma)
start_dma (ep, req);
else {
/* maybe there's no control data, just status ack */
@@ -1124,8 +993,6 @@ static void scan_dma_completions (struct net2280_ep *ep)
} else if (!ep->is_in
&& (req->req.length % ep->ep.maxpacket) != 0) {
tmp = readl (&ep->regs->ep_stat);
- if (ep->dev->pdev->vendor == 0x10b5)
- return dma_done(ep, req, tmp, 0);
/* AVOID TROUBLE HERE by not issuing short reads from
* your gadget driver. That helps avoids errata 0121,
@@ -1212,7 +1079,7 @@ static void restart_dma (struct net2280_ep *ep)
start_queue (ep, dmactl, req->td_dma);
}
-static void abort_dma_228x(struct net2280_ep *ep)
+static void abort_dma (struct net2280_ep *ep)
{
/* abort the current transfer */
if (likely (!list_empty (&ep->queue))) {
@@ -1224,19 +1091,6 @@ static void abort_dma_228x(struct net2280_ep *ep)
scan_dma_completions (ep);
}
-static void abort_dma_338x(struct net2280_ep *ep)
-{
- writel((1 << DMA_ABORT), &ep->dma->dmastat);
- spin_stop_dma(ep->dma);
-}
-
-static void abort_dma(struct net2280_ep *ep)
-{
- if (ep->dev->pdev->vendor == 0x17cc)
- return abort_dma_228x(ep);
- return abort_dma_338x(ep);
-}
-
/* dequeue ALL requests */
static void nuke (struct net2280_ep *ep)
{
@@ -1390,9 +1244,6 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
ep->wedged = 1;
} else {
clear_halt (ep);
- if (ep->dev->pdev->vendor == 0x10b5 &&
- !list_empty(&ep->queue) && ep->td_dma)
- restart_dma(ep);
ep->wedged = 0;
}
(void) readl (&ep->regs->ep_rsp);
@@ -1516,13 +1367,10 @@ static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value)
spin_lock_irqsave (&dev->lock, flags);
tmp = readl (&dev->usb->usbctl);
- if (value) {
+ if (value)
tmp |= (1 << SELF_POWERED_STATUS);
- dev->selfpowered = 1;
- } else {
+ else
tmp &= ~(1 << SELF_POWERED_STATUS);
- dev->selfpowered = 0;
- }
writel (tmp, &dev->usb->usbctl);
spin_unlock_irqrestore (&dev->lock, flags);
@@ -1656,14 +1504,14 @@ static ssize_t registers_show(struct device *_dev,
/* DMA Control Registers */
/* Configurable EP Control Registers */
- for (i = 0; i < dev->n_ep; i++) {
+ for (i = 0; i < 7; i++) {
struct net2280_ep *ep;
ep = &dev->ep [i];
if (i && !ep->desc)
continue;
- t1 = readl(&ep->cfg->ep_cfg);
+ t1 = readl (&ep->regs->ep_cfg);
t2 = readl (&ep->regs->ep_rsp) & 0xff;
t = scnprintf (next, size,
"\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s"
@@ -1723,7 +1571,7 @@ static ssize_t registers_show(struct device *_dev,
t = scnprintf (next, size, "\nirqs: ");
size -= t;
next += t;
- for (i = 0; i < dev->n_ep; i++) {
+ for (i = 0; i < 7; i++) {
struct net2280_ep *ep;
ep = &dev->ep [i];
@@ -1758,7 +1606,7 @@ static ssize_t queues_show(struct device *_dev, struct device_attribute *attr,
size = PAGE_SIZE;
spin_lock_irqsave (&dev->lock, flags);
- for (i = 0; i < dev->n_ep; i++) {
+ for (i = 0; i < 7; i++) {
struct net2280_ep *ep = &dev->ep [i];
struct net2280_request *req;
int t;
@@ -1887,121 +1735,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode)
list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list);
}
-static void defect7374_disable_data_eps(struct net2280 *dev)
-{
- /*
- * For Defect 7374, disable data EPs (and more):
- * - This phase undoes the earlier phase of the Defect 7374 workaround,
- * returing ep regs back to normal.
- */
- struct net2280_ep *ep;
- int i;
- unsigned char ep_sel;
- u32 tmp_reg;
-
- for (i = 1; i < 5; i++) {
- ep = &dev->ep[i];
- writel(0, &ep->cfg->ep_cfg);
- }
-
- /* CSROUT, CSRIN, PCIOUT, PCIIN, STATIN, RCIN */
- for (i = 0; i < 6; i++)
- writel(0, &dev->dep[i].dep_cfg);
-
- for (ep_sel = 0; ep_sel <= 21; ep_sel++) {
- /* Select an endpoint for subsequent operations: */
- tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
- writel(((tmp_reg & ~0x1f) | ep_sel), &dev->plregs->pl_ep_ctrl);
-
- if (ep_sel < 2 || (ep_sel > 9 && ep_sel < 14) ||
- ep_sel == 18 || ep_sel == 20)
- continue;
-
- /* Change settings on some selected endpoints */
- tmp_reg = readl(&dev->plregs->pl_ep_cfg_4);
- tmp_reg &= ~(1 << NON_CTRL_IN_TOLERATE_BAD_DIR);
- writel(tmp_reg, &dev->plregs->pl_ep_cfg_4);
- tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
- tmp_reg |= (1 << EP_INITIALIZED);
- writel(tmp_reg, &dev->plregs->pl_ep_ctrl);
- }
-}
-
-static void defect7374_enable_data_eps_zero(struct net2280 *dev)
-{
- u32 tmp = 0, tmp_reg;
- u32 fsmvalue, scratch;
- int i;
- unsigned char ep_sel;
-
- scratch = get_idx_reg(dev->regs, SCRATCH);
- fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD);
- scratch &= ~(0xf << DEFECT7374_FSM_FIELD);
-
- /*See if firmware needs to set up for workaround*/
- if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) {
- WARNING(dev, "Operate Defect 7374 workaround soft this time");
- WARNING(dev, "It will operate on cold-reboot and SS connect");
-
- /*GPEPs:*/
- tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_DIRECTION) |
- (2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) |
- ((dev->enhanced_mode) ?
- 1 << OUT_ENDPOINT_ENABLE : 1 << ENDPOINT_ENABLE) |
- (1 << IN_ENDPOINT_ENABLE));
-
- for (i = 1; i < 5; i++)
- writel(tmp, &dev->ep[i].cfg->ep_cfg);
-
- /* CSRIN, PCIIN, STATIN, RCIN*/
- tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_ENABLE));
- writel(tmp, &dev->dep[1].dep_cfg);
- writel(tmp, &dev->dep[3].dep_cfg);
- writel(tmp, &dev->dep[4].dep_cfg);
- writel(tmp, &dev->dep[5].dep_cfg);
-
- /*Implemented for development and debug.
- * Can be refined/tuned later.*/
- for (ep_sel = 0; ep_sel <= 21; ep_sel++) {
- /* Select an endpoint for subsequent operations: */
- tmp_reg = readl(&dev->plregs->pl_ep_ctrl);
- writel(((tmp_reg & ~0x1f) | ep_sel),
- &dev->plregs->pl_ep_ctrl);
-
- if (ep_sel == 1) {
- tmp =
- (readl(&dev->plregs->pl_ep_ctrl) |
- (1 << CLEAR_ACK_ERROR_CODE) | 0);
- writel(tmp, &dev->plregs->pl_ep_ctrl);
- continue;
- }
-
- if (ep_sel == 0 || (ep_sel > 9 && ep_sel < 14) ||
- ep_sel == 18 || ep_sel == 20)
- continue;
-
- tmp = (readl(&dev->plregs->pl_ep_cfg_4) |
- (1 << NON_CTRL_IN_TOLERATE_BAD_DIR) | 0);
- writel(tmp, &dev->plregs->pl_ep_cfg_4);
-
- tmp = readl(&dev->plregs->pl_ep_ctrl) &
- ~(1 << EP_INITIALIZED);
- writel(tmp, &dev->plregs->pl_ep_ctrl);
-
- }
-
- /* Set FSM to focus on the first Control Read:
- * - Tip: Connection speed is known upon the first
- * setup request.*/
- scratch |= DEFECT7374_FSM_WAITING_FOR_CONTROL_READ;
- set_idx_reg(dev->regs, SCRATCH, scratch);
-
- } else{
- WARNING(dev, "Defect 7374 workaround soft will NOT operate");
- WARNING(dev, "It will operate on cold-reboot and SS connect");
- }
-}
-
/* keeping it simple:
* - one bus driver, initted first;
* - one function driver, initted second
@@ -2011,7 +1744,7 @@ static void defect7374_enable_data_eps_zero(struct net2280 *dev)
* perhaps to bind specific drivers to specific devices.
*/
-static void usb_reset_228x(struct net2280 *dev)
+static void usb_reset (struct net2280 *dev)
{
u32 tmp;
@@ -2027,11 +1760,11 @@ static void usb_reset_228x(struct net2280 *dev)
/* clear old dma and irq state */
for (tmp = 0; tmp < 4; tmp++) {
- struct net2280_ep *ep = &dev->ep[tmp + 1];
+ struct net2280_ep *ep = &dev->ep [tmp + 1];
+
if (ep->dma)
- abort_dma(ep);
+ abort_dma (ep);
}
-
writel (~0, &dev->regs->irqstat0),
writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1),
@@ -2047,67 +1780,7 @@ static void usb_reset_228x(struct net2280 *dev)
set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0);
}
-static void usb_reset_338x(struct net2280 *dev)
-{
- u32 tmp;
- u32 fsmvalue;
-
- dev->gadget.speed = USB_SPEED_UNKNOWN;
- (void)readl(&dev->usb->usbctl);
-
- net2280_led_init(dev);
-
- fsmvalue = get_idx_reg(dev->regs, SCRATCH) &
- (0xf << DEFECT7374_FSM_FIELD);
-
- /* See if firmware needs to set up for workaround: */
- if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) {
- INFO(dev, "%s: Defect 7374 FsmValue 0x%08X\n", __func__,
- fsmvalue);
- } else {
- /* disable automatic responses, and irqs */
- writel(0, &dev->usb->stdrsp);
- writel(0, &dev->regs->pciirqenb0);
- writel(0, &dev->regs->pciirqenb1);
- }
-
- /* clear old dma and irq state */
- for (tmp = 0; tmp < 4; tmp++) {
- struct net2280_ep *ep = &dev->ep[tmp + 1];
-
- if (ep->dma)
- abort_dma(ep);
- }
-
- writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1);
-
- if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) {
- /* reset, and enable pci */
- tmp = readl(&dev->regs->devinit) |
- (1 << PCI_ENABLE) |
- (1 << FIFO_SOFT_RESET) |
- (1 << USB_SOFT_RESET) |
- (1 << M8051_RESET);
-
- writel(tmp, &dev->regs->devinit);
- }
-
- /* always ep-{1,2,3,4} ... maybe not ep-3 or ep-4 */
- INIT_LIST_HEAD(&dev->gadget.ep_list);
-
- for (tmp = 1; tmp < dev->n_ep; tmp++)
- list_add_tail(&dev->ep[tmp].ep.ep_list, &dev->gadget.ep_list);
-
-}
-
-static void usb_reset(struct net2280 *dev)
-{
- if (dev->pdev->vendor == 0x17cc)
- return usb_reset_228x(dev);
- return usb_reset_338x(dev);
-}
-
-static void usb_reinit_228x(struct net2280 *dev)
+static void usb_reinit (struct net2280 *dev)
{
u32 tmp;
int init_dma;
@@ -2130,8 +1803,7 @@ static void usb_reinit_228x(struct net2280 *dev)
} else
ep->fifo_size = 64;
ep->regs = &dev->epregs [tmp];
- ep->cfg = &dev->epregs[tmp];
- ep_reset_228x(dev->regs, ep);
+ ep_reset (dev->regs, ep);
}
usb_ep_set_maxpacket_limit(&dev->ep [0].ep, 64);
usb_ep_set_maxpacket_limit(&dev->ep [5].ep, 64);
@@ -2148,122 +1820,7 @@ static void usb_reinit_228x(struct net2280 *dev)
writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg);
}
-static void usb_reinit_338x(struct net2280 *dev)
-{
- int init_dma;
- int i;
- u32 tmp, val;
- u32 fsmvalue;
- static const u32 ne[9] = { 0, 1, 2, 3, 4, 1, 2, 3, 4 };
- static const u32 ep_reg_addr[9] = { 0x00, 0xC0, 0x00, 0xC0, 0x00,
- 0x00, 0xC0, 0x00, 0xC0 };
-
- /* use_dma changes are ignored till next device re-init */
- init_dma = use_dma;
-
- /* basic endpoint init */
- for (i = 0; i < dev->n_ep; i++) {
- struct net2280_ep *ep = &dev->ep[i];
-
- ep->ep.name = ep_name[i];
- ep->dev = dev;
- ep->num = i;
-
- if (i > 0 && i <= 4 && init_dma)
- ep->dma = &dev->dma[i - 1];
-
- if (dev->enhanced_mode) {
- ep->cfg = &dev->epregs[ne[i]];
- ep->regs = (struct net2280_ep_regs __iomem *)
- (((void *)&dev->epregs[ne[i]]) +
- ep_reg_addr[i]);
- ep->fiforegs = &dev->fiforegs[i];
- } else {
- ep->cfg = &dev->epregs[i];
- ep->regs = &dev->epregs[i];
- ep->fiforegs = &dev->fiforegs[i];
- }
-
- ep->fifo_size = (i != 0) ? 2048 : 512;
-
- ep_reset_338x(dev->regs, ep);
- }
- usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 512);
-
- dev->gadget.ep0 = &dev->ep[0].ep;
- dev->ep[0].stopped = 0;
-
- /* Link layer set up */
- fsmvalue = get_idx_reg(dev->regs, SCRATCH) &
- (0xf << DEFECT7374_FSM_FIELD);
-
- /* See if driver needs to set up for workaround: */
- if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ)
- INFO(dev, "%s: Defect 7374 FsmValue %08x\n",
- __func__, fsmvalue);
- else {
- tmp = readl(&dev->usb_ext->usbctl2) &
- ~((1 << U1_ENABLE) | (1 << U2_ENABLE) | (1 << LTM_ENABLE));
- writel(tmp, &dev->usb_ext->usbctl2);
- }
-
- /* Hardware Defect and Workaround */
- val = readl(&dev->ll_lfps_regs->ll_lfps_5);
- val &= ~(0xf << TIMER_LFPS_6US);
- val |= 0x5 << TIMER_LFPS_6US;
- writel(val, &dev->ll_lfps_regs->ll_lfps_5);
-
- val = readl(&dev->ll_lfps_regs->ll_lfps_6);
- val &= ~(0xffff << TIMER_LFPS_80US);
- val |= 0x0100 << TIMER_LFPS_80US;
- writel(val, &dev->ll_lfps_regs->ll_lfps_6);
-
- /*
- * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB
- * Hot Reset Exit Handshake may Fail in Specific Case using
- * Default Register Settings. Workaround for Enumeration test.
- */
- val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2);
- val &= ~(0x1f << HOT_TX_NORESET_TS2);
- val |= 0x10 << HOT_TX_NORESET_TS2;
- writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2);
-
- val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3);
- val &= ~(0x1f << HOT_RX_RESET_TS2);
- val |= 0x3 << HOT_RX_RESET_TS2;
- writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3);
-
- /*
- * Set Recovery Idle to Recover bit:
- * - On SS connections, setting Recovery Idle to Recover Fmw improves
- * link robustness with various hosts and hubs.
- * - It is safe to set for all connection speeds; all chip revisions.
- * - R-M-W to leave other bits undisturbed.
- * - Reference PLX TT-7372
- */
- val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit);
- val |= (1 << RECOVERY_IDLE_TO_RECOVER_FMW);
- writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit);
-
- INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-
- /* disable dedicated endpoints */
- writel(0x0D, &dev->dep[0].dep_cfg);
- writel(0x0D, &dev->dep[1].dep_cfg);
- writel(0x0E, &dev->dep[2].dep_cfg);
- writel(0x0E, &dev->dep[3].dep_cfg);
- writel(0x0F, &dev->dep[4].dep_cfg);
- writel(0x0C, &dev->dep[5].dep_cfg);
-}
-
-static void usb_reinit(struct net2280 *dev)
-{
- if (dev->pdev->vendor == 0x17cc)
- return usb_reinit_228x(dev);
- return usb_reinit_338x(dev);
-}
-
-static void ep0_start_228x(struct net2280 *dev)
+static void ep0_start (struct net2280 *dev)
{
writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE)
| (1 << CLEAR_NAK_OUT_PACKETS)
@@ -2306,61 +1863,6 @@ static void ep0_start_228x(struct net2280 *dev)
(void) readl (&dev->usb->usbctl);
}
-static void ep0_start_338x(struct net2280 *dev)
-{
- u32 fsmvalue;
-
- fsmvalue = get_idx_reg(dev->regs, SCRATCH) &
- (0xf << DEFECT7374_FSM_FIELD);
-
- if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ)
- INFO(dev, "%s: Defect 7374 FsmValue %08x\n", __func__,
- fsmvalue);
- else
- writel((1 << CLEAR_NAK_OUT_PACKETS_MODE) |
- (1 << SET_EP_HIDE_STATUS_PHASE),
- &dev->epregs[0].ep_rsp);
-
- /*
- * hardware optionally handles a bunch of standard requests
- * that the API hides from drivers anyway. have it do so.
- * endpoint status/features are handled in software, to
- * help pass tests for some dubious behavior.
- */
- writel((1 << SET_ISOCHRONOUS_DELAY) |
- (1 << SET_SEL) |
- (1 << SET_TEST_MODE) |
- (1 << SET_ADDRESS) |
- (1 << GET_INTERFACE_STATUS) |
- (1 << GET_DEVICE_STATUS),
- &dev->usb->stdrsp);
- dev->wakeup_enable = 1;
- writel((1 << USB_ROOT_PORT_WAKEUP_ENABLE) |
- (dev->softconnect << USB_DETECT_ENABLE) |
- (1 << DEVICE_REMOTE_WAKEUP_ENABLE),
- &dev->usb->usbctl);
-
- /* enable irqs so we can see ep0 and general operation */
- writel((1 << SETUP_PACKET_INTERRUPT_ENABLE) |
- (1 << ENDPOINT_0_INTERRUPT_ENABLE)
- , &dev->regs->pciirqenb0);
- writel((1 << PCI_INTERRUPT_ENABLE) |
- (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) |
- (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) |
- (1 << VBUS_INTERRUPT_ENABLE),
- &dev->regs->pciirqenb1);
-
- /* don't leave any writes posted */
- (void)readl(&dev->usb->usbctl);
-}
-
-static void ep0_start(struct net2280 *dev)
-{
- if (dev->pdev->vendor == 0x17cc)
- return ep0_start_228x(dev);
- return ep0_start_338x(dev);
-}
-
/* when a driver is successfully registered, it will receive
* control requests including set_configuration(), which enables
* non-control requests. then usb traffic follows until a
@@ -2384,7 +1886,7 @@ static int net2280_start(struct usb_gadget *_gadget,
dev = container_of (_gadget, struct net2280, gadget);
- for (i = 0; i < dev->n_ep; i++)
+ for (i = 0; i < 7; i++)
dev->ep [i].irqs = 0;
/* hook up the driver ... */
@@ -2398,17 +1900,13 @@ static int net2280_start(struct usb_gadget *_gadget,
if (retval) goto err_func;
/* Enable force-full-speed testing mode, if desired */
- if (full_speed && dev->pdev->vendor == 0x17cc)
+ if (full_speed)
writel(1 << FORCE_FULL_SPEED_MODE, &dev->usb->xcvrdiag);
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
net2280_led_active (dev, 1);
-
- if (dev->pdev->vendor == 0x10b5)
- defect7374_enable_data_eps_zero(dev);
-
ep0_start (dev);
DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n",
@@ -2439,7 +1937,7 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
* and kill any outstanding requests.
*/
usb_reset (dev);
- for (i = 0; i < dev->n_ep; i++)
+ for (i = 0; i < 7; i++)
nuke (&dev->ep [i]);
/* report disconnect; the driver is already quiesced */
@@ -2469,8 +1967,7 @@ static int net2280_stop(struct usb_gadget *_gadget,
net2280_led_active (dev, 0);
/* Disable full-speed test mode */
- if (dev->pdev->vendor == 0x17cc)
- writel(0, &dev->usb->xcvrdiag);
+ writel(0, &dev->usb->xcvrdiag);
device_remove_file (&dev->pdev->dev, &dev_attr_function);
device_remove_file (&dev->pdev->dev, &dev_attr_queues);
@@ -2722,350 +2219,6 @@ get_ep_by_addr (struct net2280 *dev, u16 wIndex)
return NULL;
}
-static void defect7374_workaround(struct net2280 *dev, struct usb_ctrlrequest r)
-{
- u32 scratch, fsmvalue;
- u32 ack_wait_timeout, state;
-
- /* Workaround for Defect 7374 (U1/U2 erroneously rejected): */
- scratch = get_idx_reg(dev->regs, SCRATCH);
- fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD);
- scratch &= ~(0xf << DEFECT7374_FSM_FIELD);
-
- if (!((fsmvalue == DEFECT7374_FSM_WAITING_FOR_CONTROL_READ) &&
- (r.bRequestType & USB_DIR_IN)))
- return;
-
- /* This is the first Control Read for this connection: */
- if (!(readl(&dev->usb->usbstat) & (1 << SUPER_SPEED_MODE))) {
- /*
- * Connection is NOT SS:
- * - Connection must be FS or HS.
- * - This FSM state should allow workaround software to
- * run after the next USB connection.
- */
- scratch |= DEFECT7374_FSM_NON_SS_CONTROL_READ;
- goto restore_data_eps;
- }
-
- /* Connection is SS: */
- for (ack_wait_timeout = 0;
- ack_wait_timeout < DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS;
- ack_wait_timeout++) {
-
- state = readl(&dev->plregs->pl_ep_status_1)
- & (0xff << STATE);
- if ((state >= (ACK_GOOD_NORMAL << STATE)) &&
- (state <= (ACK_GOOD_MORE_ACKS_TO_COME << STATE))) {
- scratch |= DEFECT7374_FSM_SS_CONTROL_READ;
- break;
- }
-
- /*
- * We have not yet received host's Data Phase ACK
- * - Wait and try again.
- */
- udelay(DEFECT_7374_PROCESSOR_WAIT_TIME);
-
- continue;
- }
-
-
- if (ack_wait_timeout >= DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS) {
- ERROR(dev, "FAIL: Defect 7374 workaround waited but failed");
- ERROR(dev, "to detect SS host's data phase ACK.");
- ERROR(dev, "PL_EP_STATUS_1(23:16):.Expected from 0x11 to 0x16");
- ERROR(dev, "got 0x%2.2x.\n", state >> STATE);
- } else {
- WARNING(dev, "INFO: Defect 7374 workaround waited about\n");
- WARNING(dev, "%duSec for Control Read Data Phase ACK\n",
- DEFECT_7374_PROCESSOR_WAIT_TIME * ack_wait_timeout);
- }
-
-restore_data_eps:
- /*
- * Restore data EPs to their pre-workaround settings (disabled,
- * initialized, and other details).
- */
- defect7374_disable_data_eps(dev);
-
- set_idx_reg(dev->regs, SCRATCH, scratch);
-
- return;
-}
-
-static void ep_stall(struct net2280_ep *ep, int stall)
-{
- struct net2280 *dev = ep->dev;
- u32 val;
- static const u32 ep_pl[9] = { 0, 3, 4, 7, 8, 2, 5, 6, 9 };
-
- if (stall) {
- writel((1 << SET_ENDPOINT_HALT) |
- /* (1 << SET_NAK_PACKETS) | */
- (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE),
- &ep->regs->ep_rsp);
- ep->is_halt = 1;
- } else {
- if (dev->gadget.speed == USB_SPEED_SUPER) {
- /*
- * Workaround for SS SeqNum not cleared via
- * Endpoint Halt (Clear) bit. select endpoint
- */
- val = readl(&dev->plregs->pl_ep_ctrl);
- val = (val & ~0x1f) | ep_pl[ep->num];
- writel(val, &dev->plregs->pl_ep_ctrl);
-
- val |= (1 << SEQUENCE_NUMBER_RESET);
- writel(val, &dev->plregs->pl_ep_ctrl);
- }
- val = readl(&ep->regs->ep_rsp);
- val |= (1 << CLEAR_ENDPOINT_HALT) |
- (1 << CLEAR_ENDPOINT_TOGGLE);
- writel(val
- /* | (1 << CLEAR_NAK_PACKETS)*/
- , &ep->regs->ep_rsp);
- ep->is_halt = 0;
- val = readl(&ep->regs->ep_rsp);
- }
-}
-
-static void ep_stdrsp(struct net2280_ep *ep, int value, int wedged)
-{
- /* set/clear, then synch memory views with the device */
- if (value) {
- ep->stopped = 1;
- if (ep->num == 0)
- ep->dev->protocol_stall = 1;
- else {
- if (ep->dma)
- ep_stop_dma(ep);
- ep_stall(ep, true);
- }
-
- if (wedged)
- ep->wedged = 1;
- } else {
- ep->stopped = 0;
- ep->wedged = 0;
-
- ep_stall(ep, false);
-
- /* Flush the queue */
- if (!list_empty(&ep->queue)) {
- struct net2280_request *req =
- list_entry(ep->queue.next, struct net2280_request,
- queue);
- if (ep->dma)
- resume_dma(ep);
- else {
- if (ep->is_in)
- write_fifo(ep, &req->req);
- else {
- if (read_fifo(ep, req))
- done(ep, req, 0);
- }
- }
- }
- }
-}
-
-static void handle_stat0_irqs_superspeed(struct net2280 *dev,
- struct net2280_ep *ep, struct usb_ctrlrequest r)
-{
- int tmp = 0;
-
-#define w_value le16_to_cpu(r.wValue)
-#define w_index le16_to_cpu(r.wIndex)
-#define w_length le16_to_cpu(r.wLength)
-
- switch (r.bRequest) {
- struct net2280_ep *e;
- u16 status;
-
- case USB_REQ_SET_CONFIGURATION:
- dev->addressed_state = !w_value;
- goto usb3_delegate;
-
- case USB_REQ_GET_STATUS:
- switch (r.bRequestType) {
- case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
- status = dev->wakeup_enable ? 0x02 : 0x00;
- if (dev->selfpowered)
- status |= 1 << 0;
- status |= (dev->u1_enable << 2 | dev->u2_enable << 3 |
- dev->ltm_enable << 4);
- writel(0, &dev->epregs[0].ep_irqenb);
- set_fifo_bytecount(ep, sizeof(status));
- writel((__force u32) status, &dev->epregs[0].ep_data);
- allow_status_338x(ep);
- break;
-
- case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
- e = get_ep_by_addr(dev, w_index);
- if (!e)
- goto do_stall3;
- status = readl(&e->regs->ep_rsp) &
- (1 << CLEAR_ENDPOINT_HALT);
- writel(0, &dev->epregs[0].ep_irqenb);
- set_fifo_bytecount(ep, sizeof(status));
- writel((__force u32) status, &dev->epregs[0].ep_data);
- allow_status_338x(ep);
- break;
-
- default:
- goto usb3_delegate;
- }
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- switch (r.bRequestType) {
- case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
- if (!dev->addressed_state) {
- switch (w_value) {
- case USB_DEVICE_U1_ENABLE:
- dev->u1_enable = 0;
- writel(readl(&dev->usb_ext->usbctl2) &
- ~(1 << U1_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
-
- case USB_DEVICE_U2_ENABLE:
- dev->u2_enable = 0;
- writel(readl(&dev->usb_ext->usbctl2) &
- ~(1 << U2_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
-
- case USB_DEVICE_LTM_ENABLE:
- dev->ltm_enable = 0;
- writel(readl(&dev->usb_ext->usbctl2) &
- ~(1 << LTM_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
-
- default:
- break;
- }
- }
- if (w_value == USB_DEVICE_REMOTE_WAKEUP) {
- dev->wakeup_enable = 0;
- writel(readl(&dev->usb->usbctl) &
- ~(1 << DEVICE_REMOTE_WAKEUP_ENABLE),
- &dev->usb->usbctl);
- allow_status_338x(ep);
- break;
- }
- goto usb3_delegate;
-
- case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
- e = get_ep_by_addr(dev, w_index);
- if (!e)
- goto do_stall3;
- if (w_value != USB_ENDPOINT_HALT)
- goto do_stall3;
- VDEBUG(dev, "%s clear halt\n", e->ep.name);
- ep_stall(e, false);
- if (!list_empty(&e->queue) && e->td_dma)
- restart_dma(e);
- allow_status(ep);
- ep->stopped = 1;
- break;
-
- default:
- goto usb3_delegate;
- }
- break;
- case USB_REQ_SET_FEATURE:
- switch (r.bRequestType) {
- case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE):
- if (!dev->addressed_state) {
- switch (w_value) {
- case USB_DEVICE_U1_ENABLE:
- dev->u1_enable = 1;
- writel(readl(&dev->usb_ext->usbctl2) |
- (1 << U1_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
-
- case USB_DEVICE_U2_ENABLE:
- dev->u2_enable = 1;
- writel(readl(&dev->usb_ext->usbctl2) |
- (1 << U2_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
-
- case USB_DEVICE_LTM_ENABLE:
- dev->ltm_enable = 1;
- writel(readl(&dev->usb_ext->usbctl2) |
- (1 << LTM_ENABLE),
- &dev->usb_ext->usbctl2);
- allow_status_338x(ep);
- goto next_endpoints3;
- default:
- break;
- }
- }
-
- if (w_value == USB_DEVICE_REMOTE_WAKEUP) {
- dev->wakeup_enable = 1;
- writel(readl(&dev->usb->usbctl) |
- (1 << DEVICE_REMOTE_WAKEUP_ENABLE),
- &dev->usb->usbctl);
- allow_status_338x(ep);
- break;
- }
- goto usb3_delegate;
-
- case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
- e = get_ep_by_addr(dev, w_index);
- if (!e || (w_value != USB_ENDPOINT_HALT))
- goto do_stall3;
- ep_stdrsp(e, true, false);
- allow_status_338x(ep);
- break;
-
- default:
- goto usb3_delegate;
- }
-
- break;
- default:
-
-usb3_delegate:
- VDEBUG(dev, "setup %02x.%02x v%04x i%04x l%04x ep_cfg %08x\n",
- r.bRequestType, r.bRequest,
- w_value, w_index, w_length,
- readl(&ep->cfg->ep_cfg));
-
- ep->responded = 0;
- spin_unlock(&dev->lock);
- tmp = dev->driver->setup(&dev->gadget, &r);
- spin_lock(&dev->lock);
- }
-do_stall3:
- if (tmp < 0) {
- VDEBUG(dev, "req %02x.%02x protocol STALL; stat %d\n",
- r.bRequestType, r.bRequest, tmp);
- dev->protocol_stall = 1;
- /* TD 9.9 Halt Endpoint test. TD 9.22 Set feature test */
- ep_stall(ep, true);
- }
-
-next_endpoints3:
-
-#undef w_value
-#undef w_index
-#undef w_length
-
- return;
-}
-
static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
{
struct net2280_ep *ep;
@@ -3087,20 +2240,10 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
struct net2280_request *req;
if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
- u32 val = readl(&dev->usb->usbstat);
- if (val & (1 << SUPER_SPEED)) {
- dev->gadget.speed = USB_SPEED_SUPER;
- usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
- EP0_SS_MAX_PACKET_SIZE);
- } else if (val & (1 << HIGH_SPEED)) {
+ if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED))
dev->gadget.speed = USB_SPEED_HIGH;
- usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
- EP0_HS_MAX_PACKET_SIZE);
- } else {
+ else
dev->gadget.speed = USB_SPEED_FULL;
- usb_ep_set_maxpacket_limit(&dev->ep[0].ep,
- EP0_HS_MAX_PACKET_SIZE);
- }
net2280_led_speed (dev, dev->gadget.speed);
DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
}
@@ -3118,38 +2261,32 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
}
ep->stopped = 0;
dev->protocol_stall = 0;
- if (dev->pdev->vendor == 0x10b5)
- ep->is_halt = 0;
- else{
- if (ep->dev->pdev->device == 0x2280)
- tmp = (1 << FIFO_OVERFLOW) |
- (1 << FIFO_UNDERFLOW);
- else
- tmp = 0;
-
- writel(tmp | (1 << TIMEOUT) |
- (1 << USB_STALL_SENT) |
- (1 << USB_IN_NAK_SENT) |
- (1 << USB_IN_ACK_RCVD) |
- (1 << USB_OUT_PING_NAK_SENT) |
- (1 << USB_OUT_ACK_SENT) |
- (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) |
- (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) |
- (1 << DATA_PACKET_RECEIVED_INTERRUPT) |
- (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) |
- (1 << DATA_OUT_PING_TOKEN_INTERRUPT) |
- (1 << DATA_IN_TOKEN_INTERRUPT)
- , &ep->regs->ep_stat);
- }
- u.raw[0] = readl(&dev->usb->setup0123);
- u.raw[1] = readl(&dev->usb->setup4567);
+
+ if (ep->dev->pdev->device == 0x2280)
+ tmp = (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW);
+ else
+ tmp = 0;
+
+ writel (tmp | (1 << TIMEOUT)
+ | (1 << USB_STALL_SENT)
+ | (1 << USB_IN_NAK_SENT)
+ | (1 << USB_IN_ACK_RCVD)
+ | (1 << USB_OUT_PING_NAK_SENT)
+ | (1 << USB_OUT_ACK_SENT)
+ | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
+ | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
+ | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+ | (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_IN_TOKEN_INTERRUPT)
+ , &ep->regs->ep_stat);
+ u.raw [0] = readl (&dev->usb->setup0123);
+ u.raw [1] = readl (&dev->usb->setup4567);
cpu_to_le32s (&u.raw [0]);
cpu_to_le32s (&u.raw [1]);
- if (dev->pdev->vendor == 0x10b5)
- defect7374_workaround(dev, u.r);
-
tmp = 0;
#define w_value le16_to_cpu(u.r.wValue)
@@ -3181,12 +2318,6 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
* everything else goes uplevel to the gadget code.
*/
ep->responded = 1;
-
- if (dev->gadget.speed == USB_SPEED_SUPER) {
- handle_stat0_irqs_superspeed(dev, ep, u.r);
- goto next_endpoints;
- }
-
switch (u.r.bRequest) {
case USB_REQ_GET_STATUS: {
struct net2280_ep *e;
@@ -3229,11 +2360,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
VDEBUG(dev, "%s wedged, halt not cleared\n",
ep->ep.name);
} else {
- VDEBUG(dev, "%s clear halt\n", e->ep.name);
+ VDEBUG(dev, "%s clear halt\n", ep->ep.name);
clear_halt(e);
- if (ep->dev->pdev->vendor == 0x10b5 &&
- !list_empty(&e->queue) && e->td_dma)
- restart_dma(e);
}
allow_status (ep);
goto next_endpoints;
@@ -3253,8 +2381,6 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
if (e->ep.name == ep0name)
goto do_stall;
set_halt (e);
- if (dev->pdev->vendor == 0x10b5 && e->dma)
- abort_dma(e);
allow_status (ep);
VDEBUG (dev, "%s set halt\n", ep->ep.name);
goto next_endpoints;
@@ -3266,7 +2392,7 @@ delegate:
"ep_cfg %08x\n",
u.r.bRequestType, u.r.bRequest,
w_value, w_index, w_length,
- readl(&ep->cfg->ep_cfg));
+ readl (&ep->regs->ep_cfg));
ep->responded = 0;
spin_unlock (&dev->lock);
tmp = dev->driver->setup (&dev->gadget, &u.r);
@@ -3329,7 +2455,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
/* after disconnect there's nothing else to do! */
tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT);
- mask = (1 << SUPER_SPEED) | (1 << HIGH_SPEED) | (1 << FULL_SPEED);
+ mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
* Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
@@ -3420,19 +2546,12 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
tmp = readl (&dma->dmastat);
writel (tmp, &dma->dmastat);
- /* dma sync*/
- if (dev->pdev->vendor == 0x10b5) {
- u32 r_dmacount = readl(&dma->dmacount);
- if (!ep->is_in && (r_dmacount & 0x00FFFFFF) &&
- (tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT)))
- continue;
- }
-
/* chaining should stop on abort, short OUT from fifo,
* or (stat0 codepath) short OUT transfer.
*/
if (!use_dma_chaining) {
- if (!(tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))) {
+ if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))
+ == 0) {
DEBUG (ep->dev, "%s no xact done? %08x\n",
ep->ep.name, tmp);
continue;
@@ -3506,8 +2625,7 @@ static irqreturn_t net2280_irq (int irq, void *_dev)
struct net2280 *dev = _dev;
/* shared interrupt, not ours */
- if (dev->pdev->vendor == 0x17cc &&
- (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))))
+ if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))
return IRQ_NONE;
spin_lock (&dev->lock);
@@ -3518,13 +2636,6 @@ static irqreturn_t net2280_irq (int irq, void *_dev)
/* control requests and PIO */
handle_stat0_irqs (dev, readl (&dev->regs->irqstat0));
- if (dev->pdev->vendor == 0x10b5) {
- /* re-enable interrupt to trigger any possible new interrupt */
- u32 pciirqenb1 = readl(&dev->regs->pciirqenb1);
- writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1);
- writel(pciirqenb1, &dev->regs->pciirqenb1);
- }
-
spin_unlock (&dev->lock);
return IRQ_HANDLED;
@@ -3563,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev)
}
if (dev->got_irq)
free_irq (pdev->irq, dev);
- if (use_msi && dev->pdev->vendor == 0x10b5)
- pci_disable_msi(pdev);
if (dev->regs)
iounmap (dev->regs);
if (dev->region)
@@ -3599,8 +2708,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init (&dev->lock);
dev->pdev = pdev;
dev->gadget.ops = &net2280_ops;
- dev->gadget.max_speed = (dev->pdev->vendor == 0x10b5) ?
- USB_SPEED_SUPER : USB_SPEED_HIGH;
+ dev->gadget.max_speed = USB_SPEED_HIGH;
/* the "gadget" abstracts/virtualizes the controller */
dev->gadget.name = driver_name;
@@ -3642,39 +2750,8 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200);
dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300);
- if (dev->pdev->vendor == 0x10b5) {
- u32 fsmvalue;
- u32 usbstat;
- dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
- (base + 0x00b4);
- dev->fiforegs = (struct usb338x_fifo_regs __iomem *)
- (base + 0x0500);
- dev->llregs = (struct usb338x_ll_regs __iomem *)
- (base + 0x0700);
- dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *)
- (base + 0x0748);
- dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *)
- (base + 0x077c);
- dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *)
- (base + 0x079c);
- dev->plregs = (struct usb338x_pl_regs __iomem *)
- (base + 0x0800);
- usbstat = readl(&dev->usb->usbstat);
- dev->enhanced_mode = (usbstat & (1 << 11)) ? 1 : 0;
- dev->n_ep = (dev->enhanced_mode) ? 9 : 5;
- /* put into initial config, link up all endpoints */
- fsmvalue = get_idx_reg(dev->regs, SCRATCH) &
- (0xf << DEFECT7374_FSM_FIELD);
- /* See if firmware needs to set up for workaround: */
- if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ)
- writel(0, &dev->usb->usbctl);
- } else{
- dev->enhanced_mode = 0;
- dev->n_ep = 7;
- /* put into initial config, link up all endpoints */
- writel(0, &dev->usb->usbctl);
- }
-
+ /* put into initial config, link up all endpoints */
+ writel (0, &dev->usb->usbctl);
usb_reset (dev);
usb_reinit (dev);
@@ -3685,10 +2762,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
goto done;
}
- if (use_msi && dev->pdev->vendor == 0x10b5)
- if (pci_enable_msi(pdev))
- ERROR(dev, "Failed to enable MSI mode\n");
-
if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev)
!= 0) {
ERROR (dev, "request interrupt %d failed\n", pdev->irq);
@@ -3724,8 +2797,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
}
/* enable lower-overhead pci memory bursts during DMA */
- if (dev->pdev->vendor == 0x17cc)
- writel((1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE)
+ writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE)
// 256 write retries may not be enough...
// | (1 << PCI_RETRY_ABORT_ENABLE)
| (1 << DMA_READ_MULTIPLE_ENABLE)
@@ -3742,10 +2814,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
INFO (dev, "%s\n", driver_desc);
INFO (dev, "irq %d, pci mem %p, chip rev %04x\n",
pdev->irq, base, dev->chiprev);
- INFO(dev, "version: " DRIVER_VERSION "; dma %s %s\n",
- use_dma ? (use_dma_chaining ? "chaining" : "enabled")
- : "disabled",
- dev->enhanced_mode ? "enhanced mode" : "legacy mode");
+ INFO (dev, "version: " DRIVER_VERSION "; dma %s\n",
+ use_dma
+ ? (use_dma_chaining ? "chaining" : "enabled")
+ : "disabled");
retval = device_create_file (&pdev->dev, &dev_attr_registers);
if (retval) goto done;
@@ -3777,8 +2849,7 @@ static void net2280_shutdown (struct pci_dev *pdev)
writel (0, &dev->usb->usbctl);
/* Disable full-speed test mode */
- if (dev->pdev->vendor == 0x17cc)
- writel(0, &dev->usb->xcvrdiag);
+ writel(0, &dev->usb->xcvrdiag);
}
@@ -3798,24 +2869,8 @@ static const struct pci_device_id pci_ids [] = { {
.device = 0x2282,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
-},
- {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x10b5,
- .device = 0x3380,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },
- {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x10b5,
- .device = 0x3382,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },
-{ /* end: all zeroes */ }
+
+}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE (pci, pci_ids);
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index f32c2746b6ae..a844be0d683a 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -6,7 +6,6 @@
/*
* Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
* Copyright (C) 2003 David Brownell
- * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +14,6 @@
*/
#include <linux/usb/net2280.h>
-#include <linux/usb/usb338x.h>
/*-------------------------------------------------------------------------*/
@@ -61,13 +59,6 @@ set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value)
#define CHIPREV_1 0x0100
#define CHIPREV_1A 0x0110
-/* DEFECT 7374 */
-#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200
-#define DEFECT_7374_PROCESSOR_WAIT_TIME 10
-
-/* ep0 max packet size */
-#define EP0_SS_MAX_PACKET_SIZE 0x200
-#define EP0_HS_MAX_PACKET_SIZE 0x40
#ifdef __KERNEL__
/* ep a-f highspeed and fullspeed maxpacket, addresses
@@ -94,15 +85,12 @@ struct net2280_dma {
struct net2280_ep {
struct usb_ep ep;
- struct net2280_ep_regs __iomem *cfg;
struct net2280_ep_regs __iomem *regs;
struct net2280_dma_regs __iomem *dma;
struct net2280_dma *dummy;
- struct usb338x_fifo_regs __iomem *fiforegs;
dma_addr_t td_dma; /* of dummy */
struct net2280 *dev;
unsigned long irqs;
- unsigned is_halt:1, dma_started:1;
/* analogous to a host-side qh */
struct list_head queue;
@@ -128,19 +116,10 @@ static inline void allow_status (struct net2280_ep *ep)
ep->stopped = 1;
}
-static void allow_status_338x(struct net2280_ep *ep)
+/* count (<= 4) bytes in the next fifo write will be valid */
+static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count)
{
- /*
- * Control Status Phase Handshake was set by the chip when the setup
- * packet arrived. While set, the chip automatically NAKs the host's
- * Status Phase tokens.
- */
- writel(1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE, &ep->regs->ep_rsp);
-
- ep->stopped = 1;
-
- /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */
- ep->responded = 0;
+ writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
}
struct net2280_request {
@@ -156,38 +135,23 @@ struct net2280 {
/* each pci device provides one gadget, several endpoints */
struct usb_gadget gadget;
spinlock_t lock;
- struct net2280_ep ep[9];
+ struct net2280_ep ep [7];
struct usb_gadget_driver *driver;
unsigned enabled : 1,
protocol_stall : 1,
softconnect : 1,
got_irq : 1,
- region:1,
- u1_enable:1,
- u2_enable:1,
- ltm_enable:1,
- wakeup_enable:1,
- selfpowered:1,
- addressed_state:1;
+ region : 1;
u16 chiprev;
- int enhanced_mode;
- int n_ep;
/* pci state used to access those endpoints */
struct pci_dev *pdev;
struct net2280_regs __iomem *regs;
struct net2280_usb_regs __iomem *usb;
- struct usb338x_usb_ext_regs __iomem *usb_ext;
struct net2280_pci_regs __iomem *pci;
struct net2280_dma_regs __iomem *dma;
struct net2280_dep_regs __iomem *dep;
struct net2280_ep_regs __iomem *epregs;
- struct usb338x_fifo_regs __iomem *fiforegs;
- struct usb338x_ll_regs __iomem *llregs;
- struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs;
- struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs;
- struct usb338x_ll_chi_regs __iomem *ll_chicken_reg;
- struct usb338x_pl_regs __iomem *plregs;
struct pci_pool *requests;
// statistics...
@@ -215,43 +179,6 @@ static inline void clear_halt (struct net2280_ep *ep)
, &ep->regs->ep_rsp);
}
-/*
- * FSM value for Defect 7374 (U1U2 Test) is managed in
- * chip's SCRATCH register:
- */
-#define DEFECT7374_FSM_FIELD 28
-
-/* Waiting for Control Read:
- * - A transition to this state indicates a fresh USB connection,
- * before the first Setup Packet. The connection speed is not
- * known. Firmware is waiting for the first Control Read.
- * - Starting state: This state can be thought of as the FSM's typical
- * starting state.
- * - Tip: Upon the first SS Control Read the FSM never
- * returns to this state.
- */
-#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ (1 << DEFECT7374_FSM_FIELD)
-
-/* Non-SS Control Read:
- * - A transition to this state indicates detection of the first HS
- * or FS Control Read.
- * - Tip: Upon the first SS Control Read the FSM never
- * returns to this state.
- */
-#define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD)
-
-/* SS Control Read:
- * - A transition to this state indicates detection of the
- * first SS Control Read.
- * - This state indicates workaround completion. Workarounds no longer
- * need to be applied (as long as the chip remains powered up).
- * - Tip: Once in this state the FSM state does not change (until
- * the chip's power is lost and restored).
- * - This can be thought of as the final state of the FSM;
- * the FSM 'locks-up' in this state until the chip loses power.
- */
-#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD)
-
#ifdef USE_RDK_LEDS
static inline void net2280_led_init (struct net2280 *dev)
@@ -271,9 +198,6 @@ void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed)
{
u32 val = readl (&dev->regs->gpioctl);
switch (speed) {
- case USB_SPEED_SUPER: /* green + red */
- val |= (1 << GPIO0_DATA) | (1 << GPIO1_DATA);
- break;
case USB_SPEED_HIGH: /* green */
val &= ~(1 << GPIO0_DATA);
val |= (1 << GPIO1_DATA);
@@ -347,17 +271,6 @@ static inline void net2280_led_shutdown (struct net2280 *dev)
/*-------------------------------------------------------------------------*/
-static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count)
-{
- if (ep->dev->pdev->vendor == 0x17cc)
- writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
- else{
- u32 tmp = readl(&ep->cfg->ep_cfg) &
- (~(0x07 << EP_FIFO_BYTE_COUNT));
- writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg);
- }
-}
-
static inline void start_out_naking (struct net2280_ep *ep)
{
/* NOTE: hardware races lurk here, and PING protocol issues */