USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhid

Separate usbhid code into dedicated drivers/hid/usbhid directory as
discussed previously with Greg, so that it eases maintaineance process.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

14 files changed, 0 insertions, 5151 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7ff467d262..f972fcc798b6 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -27,10 +27,7 @@ obj-$(CONFIG_USB)		+= storage/
 obj-$(CONFIG_USB_ACECAD)	+= input/
 obj-$(CONFIG_USB_AIPTEK)	+= input/
 obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_HID)		+= input/
-obj-$(CONFIG_USB_KBD)		+= input/
 obj-$(CONFIG_USB_KBTAB)		+= input/
-obj-$(CONFIG_USB_MOUSE)		+= input/
 obj-$(CONFIG_USB_MTOUCH)	+= input/
 obj-$(CONFIG_USB_POWERMATE)	+= input/
 obj-$(CONFIG_USB_WACOM)		+= input/
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 69a9f3b6d0a9..a792e42f58af 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -4,151 +4,6 @@
 comment "USB Input Devices"
 	depends on USB
 
-config USB_HID
-	tristate "USB Human Interface Device (full HID) support"
-	default y
-	depends on USB && INPUT
-	select HID
-	---help---
-	  Say Y here if you want full HID support to connect USB keyboards,
-	  mice, joysticks, graphic tablets, or any other HID based devices
-	  to your computer via USB, as well as Uninterruptible Power Supply
-	  (UPS) and monitor control devices.
-
-	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
-	  and mouse drivers at the same time. More information is available:
-	  <file:Documentation/input/input.txt>.
-
-	  If unsure, say Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbhid.
-
-comment "Input core support is needed for USB HID input layer or HIDBP support"
-	depends on USB_HID && INPUT=n
-
-config USB_HIDINPUT_POWERBOOK
-	bool "Enable support for iBook/PowerBook special keys"
-	default n
-	depends on USB_HID
-	help
-	  Say Y here if you want support for the special keys (Fn, Numlock) on
-	  Apple iBooks and PowerBooks.
-
-	  If unsure, say N.
-
-config HID_FF
-	bool "Force feedback support (EXPERIMENTAL)"
-	depends on USB_HID && EXPERIMENTAL
-	help
-	  Say Y here is you want force feedback support for a few HID devices.
-	  See below for a list of supported devices.
-
-	  See <file:Documentation/input/ff.txt> for a description of the force
-	  feedback API.
-
-	  If unsure, say N.
-
-config HID_PID
-	bool "PID device support"
-	depends on HID_FF
-	help
-	  Say Y here if you have a PID-compliant device and wish to enable force
-	  feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
-	  devices.
-
-config LOGITECH_FF
-	bool "Logitech devices support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have one of these devices:
-	  - Logitech WingMan Cordless RumblePad
-	  - Logitech WingMan Cordless RumblePad 2
-	  - Logitech WingMan Force 3D
-	  - Logitech Formula Force EX
-	  - Logitech MOMO Force wheel
-
-	  and if you want to enable force feedback for them.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config PANTHERLORD_FF
-	bool "PantherLord USB/PS2 2in1 Adapter support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
-	  to enable force feedback support for it.
-
-config THRUSTMASTER_FF
-	bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
-	depends on HID_FF && EXPERIMENTAL
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
-	  and want to enable force feedback support for it.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config ZEROPLUS_FF
-	bool "Zeroplus based game controller support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a Zeroplus based game controller and want to
-	  enable force feedback for it.
-
-config USB_HIDDEV
-	bool "/dev/hiddev raw HID device support"
-	depends on USB_HID
-	help
-	  Say Y here if you want to support HID devices (from the USB
-	  specification standpoint) that aren't strictly user interface
-	  devices, like monitor controls and Uninterruptable Power Supplies.
-
-	  This module supports these devices separately using a separate
-	  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
-
-	  If unsure, say Y.
-
-menu "USB HID Boot Protocol drivers"
-	depends on USB!=n && USB_HID!=y
-
-config USB_KBD
-	tristate "USB HIDBP Keyboard (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB keyboard and prefer
-	  to use the keyboard in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple keyboards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbkbd.
-
-	  If even remotely unsure, say N.
-
-config USB_MOUSE
-	tristate "USB HIDBP Mouse (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB mouse and prefer
-	  to use the mouse in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple mice.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbmouse.
-
-	  If even remotely unsure, say N.
-
-endmenu
-
 config USB_AIPTEK
 	tristate "Aiptek 6000U/8000U tablet support"
 	depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index a9d206c945e9..9bf420eef77f 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -4,40 +4,12 @@
 
 # Multipart objects.
 wacom-objs	:= wacom_wac.o wacom_sys.o
-usbhid-objs	:= hid-core.o
-
-# Optional parts of multipart objects.
-
-ifeq ($(CONFIG_USB_HIDDEV),y)
-	usbhid-objs	+= hiddev.o
-endif
-ifeq ($(CONFIG_HID_PID),y)
-	usbhid-objs	+= hid-pidff.o
-endif
-ifeq ($(CONFIG_LOGITECH_FF),y)
-	usbhid-objs	+= hid-lgff.o
-endif
-ifeq ($(CONFIG_PANTHERLORD_FF),y)
-	usbhid-objs	+= hid-plff.o
-endif
-ifeq ($(CONFIG_THRUSTMASTER_FF),y)
-	usbhid-objs	+= hid-tmff.o
-endif
-ifeq ($(CONFIG_ZEROPLUS_FF),y)
-	usbhid-objs	+= hid-zpff.o
-endif
-ifeq ($(CONFIG_HID_FF),y)
-	usbhid-objs	+= hid-ff.o
-endif
 
 obj-$(CONFIG_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
 obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_HID)		+= usbhid.o
-obj-$(CONFIG_USB_KBD)		+= usbkbd.o
 obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
 obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
deleted file mode 100644
index 827a75a186ba..000000000000
--- a/drivers/usb/input/hid-core.c
+++ /dev/null
@@ -1,1477 +0,0 @@
-/*
- *  USB HID support for Linux
- *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-#include <linux/input.h>
-#include <linux/wait.h>
-
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include <linux/hiddev.h>
-#include <linux/hid-debug.h>
-#include "usbhid.h"
-
-/*
- * Version Information
- */
-
-#define DRIVER_VERSION "v2.6"
-#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik"
-#define DRIVER_DESC "USB HID core driver"
-#define DRIVER_LICENSE "GPL"
-
-static char *hid_types[] = {"Device", "Pointer", "Mouse", "Device", "Joystick",
-				"Gamepad", "Keyboard", "Keypad", "Multi-Axis Controller"};
-/*
- * Module parameters.
- */
-
-static unsigned int hid_mousepoll_interval;
-module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
-MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
-
-/*
- * Input submission and I/O error handler.
- */
-
-static void hid_io_error(struct hid_device *hid);
-
-/* Start up the input URB */
-static int hid_start_in(struct hid_device *hid)
-{
-	unsigned long flags;
-	int rc = 0;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	spin_lock_irqsave(&usbhid->inlock, flags);
-	if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
-			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
-		rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
-		if (rc != 0)
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-	}
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
-	return rc;
-}
-
-/* I/O retry timer routine */
-static void hid_retry_timeout(unsigned long _hid)
-{
-	struct hid_device *hid = (struct hid_device *) _hid;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
-	if (hid_start_in(hid))
-		hid_io_error(hid);
-}
-
-/* Workqueue routine to reset the device or clear a halt */
-static void hid_reset(struct work_struct *work)
-{
-	struct usbhid_device *usbhid =
-		container_of(work, struct usbhid_device, reset_work);
-	struct hid_device *hid = usbhid->hid;
-	int rc_lock, rc = 0;
-
-	if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
-		dev_dbg(&usbhid->intf->dev, "clear halt\n");
-		rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
-		clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
-		hid_start_in(hid);
-	}
-
-	else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
-		dev_dbg(&usbhid->intf->dev, "resetting device\n");
-		rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
-		if (rc_lock >= 0) {
-			rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
-			if (rc_lock)
-				usb_unlock_device(hid_to_usb_dev(hid));
-		}
-		clear_bit(HID_RESET_PENDING, &usbhid->iofl);
-	}
-
-	switch (rc) {
-	case 0:
-		if (!test_bit(HID_IN_RUNNING, &usbhid->iofl))
-			hid_io_error(hid);
-		break;
-	default:
-		err("can't reset device, %s-%s/input%d, status %d",
-				hid_to_usb_dev(hid)->bus->bus_name,
-				hid_to_usb_dev(hid)->devpath,
-				usbhid->ifnum, rc);
-		/* FALLTHROUGH */
-	case -EHOSTUNREACH:
-	case -ENODEV:
-	case -EINTR:
-		break;
-	}
-}
-
-/* Main I/O error handler */
-static void hid_io_error(struct hid_device *hid)
-{
-	unsigned long flags;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	spin_lock_irqsave(&usbhid->inlock, flags);
-
-	/* Stop when disconnected */
-	if (usb_get_intfdata(usbhid->intf) == NULL)
-		goto done;
-
-	/* When an error occurs, retry at increasing intervals */
-	if (usbhid->retry_delay == 0) {
-		usbhid->retry_delay = 13;	/* Then 26, 52, 104, 104, ... */
-		usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
-	} else if (usbhid->retry_delay < 100)
-		usbhid->retry_delay *= 2;
-
-	if (time_after(jiffies, usbhid->stop_retry)) {
-
-		/* Retries failed, so do a port reset */
-		if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
-			schedule_work(&usbhid->reset_work);
-			goto done;
-		}
-	}
-
-	mod_timer(&usbhid->io_retry,
-			jiffies + msecs_to_jiffies(usbhid->retry_delay));
-done:
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
-}
-
-/*
- * Input interrupt completion handler.
- */
-
-static void hid_irq_in(struct urb *urb)
-{
-	struct hid_device	*hid = urb->context;
-	struct usbhid_device 	*usbhid = hid->driver_data;
-	int			status;
-
-	switch (urb->status) {
-		case 0:			/* success */
-			usbhid->retry_delay = 0;
-			hid_input_report(urb->context, HID_INPUT_REPORT,
-					 urb->transfer_buffer,
-					 urb->actual_length, 1);
-			break;
-		case -EPIPE:		/* stall */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			set_bit(HID_CLEAR_HALT, &usbhid->iofl);
-			schedule_work(&usbhid->reset_work);
-			return;
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-		case -ESHUTDOWN:	/* unplug */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			return;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ETIME:		/* protocol error or unplug */
-		case -ETIMEDOUT:	/* Should never happen, but... */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			hid_io_error(hid);
-			return;
-		default:		/* error */
-			warn("input irq status %d received", urb->status);
-	}
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-		if (status != -EPERM) {
-			err("can't resubmit intr, %s-%s/input%d, status %d",
-					hid_to_usb_dev(hid)->bus->bus_name,
-					hid_to_usb_dev(hid)->devpath,
-					usbhid->ifnum, status);
-			hid_io_error(hid);
-		}
-	}
-}
-
-static int hid_submit_out(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	report = usbhid->out[usbhid->outtail];
-
-	hid_output_report(report, usbhid->outbuf);
-	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	usbhid->urbout->dev = hid_to_usb_dev(hid);
-
-	dbg("submitting out urb");
-
-	if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
-		err("usb_submit_urb(out) failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int hid_submit_ctrl(struct hid_device *hid)
-{
-	struct hid_report *report;
-	unsigned char dir;
-	int len;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	report = usbhid->ctrl[usbhid->ctrltail].report;
-	dir = usbhid->ctrl[usbhid->ctrltail].dir;
-
-	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	if (dir == USB_DIR_OUT) {
-		hid_output_report(report, usbhid->ctrlbuf);
-		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
-		usbhid->urbctrl->transfer_buffer_length = len;
-	} else {
-		int maxpacket, padlen;
-
-		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
-		maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
-		if (maxpacket > 0) {
-			padlen = (len + maxpacket - 1) / maxpacket;
-			padlen *= maxpacket;
-			if (padlen > usbhid->bufsize)
-				padlen = usbhid->bufsize;
-		} else
-			padlen = 0;
-		usbhid->urbctrl->transfer_buffer_length = padlen;
-	}
-	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
-
-	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
-	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
-	usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
-	usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
-	usbhid->cr->wLength = cpu_to_le16(len);
-
-	dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
-		usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
-		usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
-
-	if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
-		err("usb_submit_urb(ctrl) failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Output interrupt completion handler.
- */
-
-static void hid_irq_out(struct urb *urb)
-{
-	struct hid_device *hid = urb->context;
-	struct usbhid_device *usbhid = hid->driver_data;
-	unsigned long flags;
-	int unplug = 0;
-
-	switch (urb->status) {
-		case 0:			/* success */
-			break;
-		case -ESHUTDOWN:	/* unplug */
-			unplug = 1;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-			break;
-		default:		/* error */
-			warn("output irq status %d received", urb->status);
-	}
-
-	spin_lock_irqsave(&usbhid->outlock, flags);
-
-	if (unplug)
-		usbhid->outtail = usbhid->outhead;
-	else
-		usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
-
-	if (usbhid->outhead != usbhid->outtail) {
-		if (hid_submit_out(hid)) {
-			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-			wake_up(&hid->wait);
-		}
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
-		return;
-	}
-
-	clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->outlock, flags);
-	wake_up(&hid->wait);
-}
-
-/*
- * Control pipe completion handler.
- */
-
-static void hid_ctrl(struct urb *urb)
-{
-	struct hid_device *hid = urb->context;
-	struct usbhid_device *usbhid = hid->driver_data;
-	unsigned long flags;
-	int unplug = 0;
-
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
-
-	switch (urb->status) {
-		case 0:			/* success */
-			if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
-				hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type,
-						urb->transfer_buffer, urb->actual_length, 0);
-			break;
-		case -ESHUTDOWN:	/* unplug */
-			unplug = 1;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-		case -EPIPE:		/* report not available */
-			break;
-		default:		/* error */
-			warn("ctrl urb status %d received", urb->status);
-	}
-
-	if (unplug)
-		usbhid->ctrltail = usbhid->ctrlhead;
-	else
-		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
-
-	if (usbhid->ctrlhead != usbhid->ctrltail) {
-		if (hid_submit_ctrl(hid)) {
-			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-			wake_up(&hid->wait);
-		}
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-		return;
-	}
-
-	clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-	wake_up(&hid->wait);
-}
-
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
-{
-	int head;
-	unsigned long flags;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
-		return;
-
-	if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
-
-		spin_lock_irqsave(&usbhid->outlock, flags);
-
-		if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
-			spin_unlock_irqrestore(&usbhid->outlock, flags);
-			warn("output queue full");
-			return;
-		}
-
-		usbhid->out[usbhid->outhead] = report;
-		usbhid->outhead = head;
-
-		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
-			if (hid_submit_out(hid))
-				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
-		return;
-	}
-
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
-
-	if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-		warn("control queue full");
-		return;
-	}
-
-	usbhid->ctrl[usbhid->ctrlhead].report = report;
-	usbhid->ctrl[usbhid->ctrlhead].dir = dir;
-	usbhid->ctrlhead = head;
-
-	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
-		if (hid_submit_ctrl(hid))
-			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-}
-
-static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	struct hid_device *hid = dev->private;
-	struct hid_field *field;
-	int offset;
-
-	if (type == EV_FF)
-		return input_ff_event(dev, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
-		warn("event field not found");
-		return -1;
-	}
-
-	hid_set_field(field, offset, value);
-	usbhid_submit_report(hid, field->report, USB_DIR_OUT);
-
-	return 0;
-}
-
-int usbhid_wait_io(struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
-					!test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
-					10*HZ)) {
-		dbg("timeout waiting for ctrl or out queue to clear");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
-{
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
-		ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
-		unsigned char type, void *buf, int size)
-{
-	int result, retries = 4;
-
-	memset(buf, 0, size);
-
-	do {
-		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-				USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
-				(type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT);
-		retries--;
-	} while (result < size && retries);
-	return result;
-}
-
-int usbhid_open(struct hid_device *hid)
-{
-	++hid->open;
-	if (hid_start_in(hid))
-		hid_io_error(hid);
-	return 0;
-}
-
-void usbhid_close(struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (!--hid->open)
-		usb_kill_urb(usbhid->urbin);
-}
-
-#define USB_VENDOR_ID_PANJIT		0x134c
-
-#define USB_VENDOR_ID_TURBOX		0x062a
-#define USB_DEVICE_ID_TURBOX_KEYBOARD	0x0201
-#define USB_VENDOR_ID_CIDC		0x1677
-
-/*
- * Initialize all reports
- */
-
-void usbhid_init_reports(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct usbhid_device *usbhid = hid->driver_data;
-	int err, ret;
-
-	list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
-		usbhid_submit_report(hid, report, USB_DIR_IN);
-
-	list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
-		usbhid_submit_report(hid, report, USB_DIR_IN);
-
-	err = 0;
-	ret = usbhid_wait_io(hid);
-	while (ret) {
-		err |= ret;
-		if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
-			usb_kill_urb(usbhid->urbctrl);
-		if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
-			usb_kill_urb(usbhid->urbout);
-		ret = usbhid_wait_io(hid);
-	}
-
-	if (err)
-		warn("timeout initializing reports");
-}
-
-#define USB_VENDOR_ID_GTCO		0x078c
-#define USB_DEVICE_ID_GTCO_90		0x0090
-#define USB_DEVICE_ID_GTCO_100		0x0100
-#define USB_DEVICE_ID_GTCO_101		0x0101
-#define USB_DEVICE_ID_GTCO_103		0x0103
-#define USB_DEVICE_ID_GTCO_104		0x0104
-#define USB_DEVICE_ID_GTCO_105		0x0105
-#define USB_DEVICE_ID_GTCO_106		0x0106
-#define USB_DEVICE_ID_GTCO_107		0x0107
-#define USB_DEVICE_ID_GTCO_108		0x0108
-#define USB_DEVICE_ID_GTCO_200		0x0200
-#define USB_DEVICE_ID_GTCO_201		0x0201
-#define USB_DEVICE_ID_GTCO_202		0x0202
-#define USB_DEVICE_ID_GTCO_203		0x0203
-#define USB_DEVICE_ID_GTCO_204		0x0204
-#define USB_DEVICE_ID_GTCO_205		0x0205
-#define USB_DEVICE_ID_GTCO_206		0x0206
-#define USB_DEVICE_ID_GTCO_207		0x0207
-#define USB_DEVICE_ID_GTCO_300		0x0300
-#define USB_DEVICE_ID_GTCO_301		0x0301
-#define USB_DEVICE_ID_GTCO_302		0x0302
-#define USB_DEVICE_ID_GTCO_303		0x0303
-#define USB_DEVICE_ID_GTCO_304		0x0304
-#define USB_DEVICE_ID_GTCO_305		0x0305
-#define USB_DEVICE_ID_GTCO_306		0x0306
-#define USB_DEVICE_ID_GTCO_307		0x0307
-#define USB_DEVICE_ID_GTCO_308		0x0308
-#define USB_DEVICE_ID_GTCO_309		0x0309
-#define USB_DEVICE_ID_GTCO_400		0x0400
-#define USB_DEVICE_ID_GTCO_401		0x0401
-#define USB_DEVICE_ID_GTCO_402		0x0402
-#define USB_DEVICE_ID_GTCO_403		0x0403
-#define USB_DEVICE_ID_GTCO_404		0x0404
-#define USB_DEVICE_ID_GTCO_405		0x0405
-#define USB_DEVICE_ID_GTCO_500		0x0500
-#define USB_DEVICE_ID_GTCO_501		0x0501
-#define USB_DEVICE_ID_GTCO_502		0x0502
-#define USB_DEVICE_ID_GTCO_503		0x0503
-#define USB_DEVICE_ID_GTCO_504		0x0504
-#define USB_DEVICE_ID_GTCO_1000		0x1000
-#define USB_DEVICE_ID_GTCO_1001		0x1001
-#define USB_DEVICE_ID_GTCO_1002		0x1002
-#define USB_DEVICE_ID_GTCO_1003		0x1003
-#define USB_DEVICE_ID_GTCO_1004		0x1004
-#define USB_DEVICE_ID_GTCO_1005		0x1005
-#define USB_DEVICE_ID_GTCO_1006		0x1006
-
-#define USB_VENDOR_ID_WACOM		0x056a
-
-#define USB_VENDOR_ID_ACECAD		0x0460
-#define USB_DEVICE_ID_ACECAD_FLAIR	0x0004
-#define USB_DEVICE_ID_ACECAD_302	0x0008
-
-#define USB_VENDOR_ID_KBGEAR		0x084e
-#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO	0x1001
-
-#define USB_VENDOR_ID_AIPTEK		0x08ca
-#define USB_DEVICE_ID_AIPTEK_01		0x0001
-#define USB_DEVICE_ID_AIPTEK_10		0x0010
-#define USB_DEVICE_ID_AIPTEK_20		0x0020
-#define USB_DEVICE_ID_AIPTEK_21		0x0021
-#define USB_DEVICE_ID_AIPTEK_22		0x0022
-#define USB_DEVICE_ID_AIPTEK_23		0x0023
-#define USB_DEVICE_ID_AIPTEK_24		0x0024
-
-#define USB_VENDOR_ID_GRIFFIN		0x077d
-#define USB_DEVICE_ID_POWERMATE		0x0410
-#define USB_DEVICE_ID_SOUNDKNOB		0x04AA
-
-#define USB_VENDOR_ID_ATEN		0x0557
-#define USB_DEVICE_ID_ATEN_UC100KM	0x2004
-#define USB_DEVICE_ID_ATEN_CS124U	0x2202
-#define USB_DEVICE_ID_ATEN_2PORTKVM	0x2204
-#define USB_DEVICE_ID_ATEN_4PORTKVM	0x2205
-#define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
-
-#define USB_VENDOR_ID_TOPMAX		0x0663
-#define USB_DEVICE_ID_TOPMAX_COBRAPAD	0x0103
-
-#define USB_VENDOR_ID_HAPP		0x078b
-#define USB_DEVICE_ID_UGCI_DRIVING	0x0010
-#define USB_DEVICE_ID_UGCI_FLYING	0x0020
-#define USB_DEVICE_ID_UGCI_FIGHTING	0x0030
-
-#define USB_VENDOR_ID_MGE		0x0463
-#define USB_DEVICE_ID_MGE_UPS		0xffff
-#define USB_DEVICE_ID_MGE_UPS1		0x0001
-
-#define USB_VENDOR_ID_ONTRAK		0x0a07
-#define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
-
-#define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
-#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
-
-#define USB_VENDOR_ID_A4TECH		0x09da
-#define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
-
-#define USB_VENDOR_ID_AASHIMA		0x06d6
-#define USB_DEVICE_ID_AASHIMA_GAMEPAD	0x0025
-#define USB_DEVICE_ID_AASHIMA_PREDATOR	0x0026
-
-#define USB_VENDOR_ID_CYPRESS		0x04b4
-#define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001
-#define USB_DEVICE_ID_CYPRESS_HIDCOM	0x5500
-#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE	0x7417
-
-#define USB_VENDOR_ID_BERKSHIRE		0x0c98
-#define USB_DEVICE_ID_BERKSHIRE_PCWD	0x1140
-
-#define USB_VENDOR_ID_ALPS		0x0433
-#define USB_DEVICE_ID_IBM_GAMEPAD	0x1101
-
-#define USB_VENDOR_ID_SAITEK		0x06a3
-#define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
-
-#define USB_VENDOR_ID_NEC		0x073e
-#define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
-
-#define USB_VENDOR_ID_CHIC		0x05fe
-#define USB_DEVICE_ID_CHIC_GAMEPAD	0x0014
-
-#define USB_VENDOR_ID_GLAB		0x06c2
-#define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
-#define USB_DEVICE_ID_1_PHIDGETSERVO_30	0x0039
-#define USB_DEVICE_ID_0_0_4_IF_KIT	0x0040
-#define USB_DEVICE_ID_0_16_16_IF_KIT	0x0044
-#define USB_DEVICE_ID_8_8_8_IF_KIT	0x0045
-#define USB_DEVICE_ID_0_8_7_IF_KIT	0x0051
-#define USB_DEVICE_ID_0_8_8_IF_KIT	0x0053
-#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL	0x0058
-
-#define USB_VENDOR_ID_WISEGROUP		0x0925
-#define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
-#define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
-#define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
-#define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
-
-#define USB_VENDOR_ID_WISEGROUP_LTD	0x6677
-#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
-
-#define USB_VENDOR_ID_CODEMERCS		0x07c0
-#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST	0x1500
-#define USB_DEVICE_ID_CODEMERCS_IOW_LAST	0x15ff
-
-#define USB_VENDOR_ID_DELORME		0x1163
-#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
-#define USB_DEVICE_ID_DELORME_EM_LT20	0x0200
-
-#define USB_VENDOR_ID_MCC		0x09db
-#define USB_DEVICE_ID_MCC_PMD1024LS	0x0076
-#define USB_DEVICE_ID_MCC_PMD1208LS	0x007a
-
-#define USB_VENDOR_ID_VERNIER		0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
-#define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
-#define USB_DEVICE_ID_VERNIER_SKIP	0x0003
-#define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
-
-#define USB_VENDOR_ID_LD		0x0f11
-#define USB_DEVICE_ID_LD_CASSY		0x1000
-#define USB_DEVICE_ID_LD_POCKETCASSY	0x1010
-#define USB_DEVICE_ID_LD_MOBILECASSY	0x1020
-#define USB_DEVICE_ID_LD_JWM		0x1080
-#define USB_DEVICE_ID_LD_DMMP		0x1081
-#define USB_DEVICE_ID_LD_UMIP		0x1090
-#define USB_DEVICE_ID_LD_XRAY1		0x1100
-#define USB_DEVICE_ID_LD_XRAY2		0x1101
-#define USB_DEVICE_ID_LD_VIDEOCOM	0x1200
-#define USB_DEVICE_ID_LD_COM3LAB	0x2000
-#define USB_DEVICE_ID_LD_TELEPORT	0x2010
-#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
-#define USB_DEVICE_ID_LD_POWERCONTROL	0x2030
-#define USB_DEVICE_ID_LD_MACHINETEST	0x2040
-
-#define USB_VENDOR_ID_APPLE		0x05ac
-#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO	0x020f
-#define USB_DEVICE_ID_APPLE_GEYSER_ANSI	0x0214
-#define USB_DEVICE_ID_APPLE_GEYSER_ISO	0x0215
-#define USB_DEVICE_ID_APPLE_GEYSER_JIS	0x0216
-#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI	0x0217
-#define USB_DEVICE_ID_APPLE_GEYSER3_ISO	0x0218
-#define USB_DEVICE_ID_APPLE_GEYSER3_JIS	0x0219
-#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI	0x021a
-#define USB_DEVICE_ID_APPLE_GEYSER4_ISO	0x021b
-#define USB_DEVICE_ID_APPLE_GEYSER4_JIS	0x021c
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
-#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
-#define USB_DEVICE_ID_APPLE_IR		0x8240
-
-#define USB_VENDOR_ID_CHERRY		0x046a
-#define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
-
-#define USB_VENDOR_ID_YEALINK		0x6993
-#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K	0xb001
-
-#define USB_VENDOR_ID_ALCOR		0x058f
-#define USB_DEVICE_ID_ALCOR_USBRS232	0x9720
-
-#define USB_VENDOR_ID_SUN		0x0430
-#define USB_DEVICE_ID_RARITAN_KVM_DONGLE	0xcdab
-
-#define USB_VENDOR_ID_AIRCABLE		0x16CA
-#define USB_DEVICE_ID_AIRCABLE1		0x1502
-
-#define USB_VENDOR_ID_LOGITECH		0x046d
-#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER	0xc101
-#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2	0xc517
-#define USB_DEVICE_ID_DINOVO_EDGE	0xc714
-
-#define USB_VENDOR_ID_IMATION		0x0718
-#define USB_DEVICE_ID_DISC_STAKKA	0xd000
-
-#define USB_VENDOR_ID_PANTHERLORD	0x0810
-#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK	0x0001
-
-#define USB_VENDOR_ID_SONY			0x054c
-#define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268
-
-/*
- * Alphabetically sorted blacklist by quirk type.
- */
-
-static const struct hid_blacklist {
-	__u16 idVendor;
-	__u16 idProduct;
-	unsigned quirks;
-} hid_blacklist[] = {
-
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
-
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_20, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_21, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_ULTRAMOUSE, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_0_4_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_16_16_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
-
-	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
-
-	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
-	{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
-
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
-	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK_5 },
-
-	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_GAMEPAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-	{ USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
-
-	{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
-
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
-
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE },
-
-	{ USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
-
-	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
-
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS },
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2, HID_QUIRK_LOGITECH_S510_DESCRIPTOR },
-
-	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
-
-	{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
-
-	{ USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
-
-	{ 0, 0 }
-};
-
-/*
- * Traverse the supplied list of reports and find the longest
- */
-static void hid_find_max_report(struct hid_device *hid, unsigned int type, int *max)
-{
-	struct hid_report *report;
-	int size;
-
-	list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
-		size = ((report->size - 1) >> 3) + 1;
-		if (type == HID_INPUT_REPORT && hid->report_enum[type].numbered)
-			size++;
-		if (*max < size)
-			*max = size;
-	}
-}
-
-static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (!(usbhid->inbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->inbuf_dma)))
-		return -1;
-	if (!(usbhid->outbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->outbuf_dma)))
-		return -1;
-	if (!(usbhid->cr = usb_buffer_alloc(dev, sizeof(*(usbhid->cr)), GFP_ATOMIC, &usbhid->cr_dma)))
-		return -1;
-	if (!(usbhid->ctrlbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->ctrlbuf_dma)))
-		return -1;
-
-	return 0;
-}
-
-static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (usbhid->inbuf)
-		usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
-	if (usbhid->outbuf)
-		usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
-	if (usbhid->cr)
-		usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma);
-	if (usbhid->ctrlbuf)
-		usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
-}
-
-/*
- * Cherry Cymotion keyboard have an invalid HID report descriptor,
- * that needs fixing before we can parse it.
- */
-
-static void hid_fixup_cymotion_descriptor(char *rdesc, int rsize)
-{
-	if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
-		info("Fixing up Cherry Cymotion report descriptor");
-		rdesc[11] = rdesc[16] = 0xff;
-		rdesc[12] = rdesc[17] = 0x03;
-	}
-}
-
-/*
- * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
- * to "operational".  Without this, the ps3 controller will not report any
- * events.
- */
-static void hid_fixup_sony_ps3_controller(struct usb_device *dev, int ifnum)
-{
-	int result;
-	char *buf = kmalloc(18, GFP_KERNEL);
-
-	if (!buf)
-		return;
-
-	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-				 HID_REQ_GET_REPORT,
-				 USB_DIR_IN | USB_TYPE_CLASS |
-				 USB_RECIP_INTERFACE,
-				 (3 << 8) | 0xf2, ifnum, buf, 17,
-				 USB_CTRL_GET_TIMEOUT);
-
-	if (result < 0)
-		err("%s failed: %d\n", __func__, result);
-
-	kfree(buf);
-}
-
-/*
- * Logitech S510 keyboard sends in report #3 keys which are far
- * above the logical maximum described in descriptor. This extends
- * the original value of 0x28c of logical maximum to 0x104d
- */
-static void hid_fixup_s510_descriptor(unsigned char *rdesc, int rsize)
-{
-	if (rsize >= 90 && rdesc[83] == 0x26
-			&& rdesc[84] == 0x8c
-			&& rdesc[85] == 0x02) {
-		info("Fixing up Logitech S510 report descriptor");
-		rdesc[84] = rdesc[89] = 0x4d;
-		rdesc[85] = rdesc[90] = 0x10;
-	}
-}
-
-static struct hid_device *usb_hid_configure(struct usb_interface *intf)
-{
-	struct usb_host_interface *interface = intf->cur_altsetting;
-	struct usb_device *dev = interface_to_usbdev (intf);
-	struct hid_descriptor *hdesc;
-	struct hid_device *hid;
-	unsigned quirks = 0, rsize = 0;
-	char *rdesc;
-	int n, len, insize = 0;
-	struct usbhid_device *usbhid;
-
-	/* Ignore all Wacom devices */
-	if (le16_to_cpu(dev->descriptor.idVendor) == USB_VENDOR_ID_WACOM)
-		return NULL;
-	/* ignore all Code Mercenaries IOWarrior devices */
-	if (le16_to_cpu(dev->descriptor.idVendor) == USB_VENDOR_ID_CODEMERCS)
-		if (le16_to_cpu(dev->descriptor.idProduct) >= USB_DEVICE_ID_CODEMERCS_IOW_FIRST &&
-		    le16_to_cpu(dev->descriptor.idProduct) <= USB_DEVICE_ID_CODEMERCS_IOW_LAST)
-			return NULL;
-
-	for (n = 0; hid_blacklist[n].idVendor; n++)
-		if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
-			(hid_blacklist[n].idProduct == le16_to_cpu(dev->descriptor.idProduct)))
-				quirks = hid_blacklist[n].quirks;
-
-	/* Many keyboards and mice don't like to be polled for reports,
-	 * so we will always set the HID_QUIRK_NOGET flag for them. */
-	if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
-		if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD ||
-			interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE)
-				quirks |= HID_QUIRK_NOGET;
-	}
-
-	if (quirks & HID_QUIRK_IGNORE)
-		return NULL;
-
-	if ((quirks & HID_QUIRK_IGNORE_MOUSE) &&
-		(interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE))
-			return NULL;
-
-
-	if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
-	    (!interface->desc.bNumEndpoints ||
-	     usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
-		dbg("class descriptor not present\n");
-		return NULL;
-	}
-
-	for (n = 0; n < hdesc->bNumDescriptors; n++)
-		if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT)
-			rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength);
-
-	if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
-		dbg("weird size of report descriptor (%u)", rsize);
-		return NULL;
-	}
-
-	if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
-		dbg("couldn't allocate rdesc memory");
-		return NULL;
-	}
-
-	hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
-
-	if ((n = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, HID_DT_REPORT, rdesc, rsize)) < 0) {
-		dbg("reading report descriptor failed");
-		kfree(rdesc);
-		return NULL;
-	}
-
-	if ((quirks & HID_QUIRK_CYMOTION))
-		hid_fixup_cymotion_descriptor(rdesc, rsize);
-
-	if (quirks & HID_QUIRK_LOGITECH_S510_DESCRIPTOR)
-		hid_fixup_s510_descriptor(rdesc, rsize);
-
-#ifdef CONFIG_HID_DEBUG
-	printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
-	for (n = 0; n < rsize; n++)
-		printk(" %02x", (unsigned char) rdesc[n]);
-	printk("\n");
-#endif
-
-	if (!(hid = hid_parse_report(rdesc, n))) {
-		dbg("parsing report descriptor failed");
-		kfree(rdesc);
-		return NULL;
-	}
-
-	kfree(rdesc);
-	hid->quirks = quirks;
-
-	if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))
-		goto fail;
-
-	hid->driver_data = usbhid;
-	usbhid->hid = hid;
-
-	usbhid->bufsize = HID_MIN_BUFFER_SIZE;
-	hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
-	hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
-	hid_find_max_report(hid, HID_FEATURE_REPORT, &usbhid->bufsize);
-
-	if (usbhid->bufsize > HID_MAX_BUFFER_SIZE)
-		usbhid->bufsize = HID_MAX_BUFFER_SIZE;
-
-	hid_find_max_report(hid, HID_INPUT_REPORT, &insize);
-
-	if (insize > HID_MAX_BUFFER_SIZE)
-		insize = HID_MAX_BUFFER_SIZE;
-
-	if (hid_alloc_buffers(dev, hid)) {
-		hid_free_buffers(dev, hid);
-		goto fail;
-	}
-
-	for (n = 0; n < interface->desc.bNumEndpoints; n++) {
-
-		struct usb_endpoint_descriptor *endpoint;
-		int pipe;
-		int interval;
-
-		endpoint = &interface->endpoint[n].desc;
-		if ((endpoint->bmAttributes & 3) != 3)		/* Not an interrupt endpoint */
-			continue;
-
-		interval = endpoint->bInterval;
-
-		/* Change the polling interval of mice. */
-		if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
-			interval = hid_mousepoll_interval;
-
-		if (usb_endpoint_dir_in(endpoint)) {
-			if (usbhid->urbin)
-				continue;
-			if (!(usbhid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
-				goto fail;
-			pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-			usb_fill_int_urb(usbhid->urbin, dev, pipe, usbhid->inbuf, insize,
-					 hid_irq_in, hid, interval);
-			usbhid->urbin->transfer_dma = usbhid->inbuf_dma;
-			usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-		} else {
-			if (usbhid->urbout)
-				continue;
-			if (!(usbhid->urbout = usb_alloc_urb(0, GFP_KERNEL)))
-				goto fail;
-			pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress);
-			usb_fill_int_urb(usbhid->urbout, dev, pipe, usbhid->outbuf, 0,
-					 hid_irq_out, hid, interval);
-			usbhid->urbout->transfer_dma = usbhid->outbuf_dma;
-			usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-		}
-	}
-
-	if (!usbhid->urbin) {
-		err("couldn't find an input interrupt endpoint");
-		goto fail;
-	}
-
-	init_waitqueue_head(&hid->wait);
-
-	INIT_WORK(&usbhid->reset_work, hid_reset);
-	setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
-
-	spin_lock_init(&usbhid->inlock);
-	spin_lock_init(&usbhid->outlock);
-	spin_lock_init(&usbhid->ctrllock);
-
-	hid->version = le16_to_cpu(hdesc->bcdHID);
-	hid->country = hdesc->bCountryCode;
-	hid->dev = &intf->dev;
-	usbhid->intf = intf;
-	usbhid->ifnum = interface->desc.bInterfaceNumber;
-
-	hid->name[0] = 0;
-
-	if (dev->manufacturer)
-		strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
-
-	if (dev->product) {
-		if (dev->manufacturer)
-			strlcat(hid->name, " ", sizeof(hid->name));
-		strlcat(hid->name, dev->product, sizeof(hid->name));
-	}
-
-	if (!strlen(hid->name))
-		snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x",
-			 le16_to_cpu(dev->descriptor.idVendor),
-			 le16_to_cpu(dev->descriptor.idProduct));
-
-	hid->bus = BUS_USB;
-	hid->vendor = le16_to_cpu(dev->descriptor.idVendor);
-	hid->product = le16_to_cpu(dev->descriptor.idProduct);
-
-	usb_make_path(dev, hid->phys, sizeof(hid->phys));
-	strlcat(hid->phys, "/input", sizeof(hid->phys));
-	len = strlen(hid->phys);
-	if (len < sizeof(hid->phys) - 1)
-		snprintf(hid->phys + len, sizeof(hid->phys) - len,
-			 "%d", intf->altsetting[0].desc.bInterfaceNumber);
-
-	if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
-		hid->uniq[0] = 0;
-
-	usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
-	if (!usbhid->urbctrl)
-		goto fail;
-
-	usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr,
-			     usbhid->ctrlbuf, 1, hid_ctrl, hid);
-	usbhid->urbctrl->setup_dma = usbhid->cr_dma;
-	usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
-	usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
-	hid->hidinput_input_event = usb_hidinput_input_event;
-	hid->hid_open = usbhid_open;
-	hid->hid_close = usbhid_close;
-#ifdef CONFIG_USB_HIDDEV
-	hid->hiddev_hid_event = hiddev_hid_event;
-	hid->hiddev_report_event = hiddev_report_event;
-#endif
-	return hid;
-
-fail:
-	usb_free_urb(usbhid->urbin);
-	usb_free_urb(usbhid->urbout);
-	usb_free_urb(usbhid->urbctrl);
-	hid_free_buffers(dev, hid);
-	hid_free_device(hid);
-
-	return NULL;
-}
-
-static void hid_disconnect(struct usb_interface *intf)
-{
-	struct hid_device *hid = usb_get_intfdata (intf);
-	struct usbhid_device *usbhid;
-
-	if (!hid)
-		return;
-
-	usbhid = hid->driver_data;
-
-	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
-	usb_set_intfdata(intf, NULL);
-	spin_unlock_irq(&usbhid->inlock);
-	usb_kill_urb(usbhid->urbin);
-	usb_kill_urb(usbhid->urbout);
-	usb_kill_urb(usbhid->urbctrl);
-
-	del_timer_sync(&usbhid->io_retry);
-	flush_scheduled_work();
-
-	if (hid->claimed & HID_CLAIMED_INPUT)
-		hidinput_disconnect(hid);
-	if (hid->claimed & HID_CLAIMED_HIDDEV)
-		hiddev_disconnect(hid);
-
-	usb_free_urb(usbhid->urbin);
-	usb_free_urb(usbhid->urbctrl);
-	usb_free_urb(usbhid->urbout);
-
-	hid_free_buffers(hid_to_usb_dev(hid), hid);
-	hid_free_device(hid);
-}
-
-static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct hid_device *hid;
-	char path[64];
-	int i;
-	char *c;
-
-	dbg("HID probe called for ifnum %d",
-			intf->altsetting->desc.bInterfaceNumber);
-
-	if (!(hid = usb_hid_configure(intf)))
-		return -ENODEV;
-
-	usbhid_init_reports(hid);
-	hid_dump_device(hid);
-
-	if (!hidinput_connect(hid))
-		hid->claimed |= HID_CLAIMED_INPUT;
-	if (!hiddev_connect(hid))
-		hid->claimed |= HID_CLAIMED_HIDDEV;
-
-	usb_set_intfdata(intf, hid);
-
-	if (!hid->claimed) {
-		printk ("HID device not claimed by input or hiddev\n");
-		hid_disconnect(intf);
-		return -ENODEV;
-	}
-
-	if ((hid->claimed & HID_CLAIMED_INPUT))
-		hid_ff_init(hid);
-
-	if (hid->quirks & HID_QUIRK_SONY_PS3_CONTROLLER)
-		hid_fixup_sony_ps3_controller(interface_to_usbdev(intf),
-			intf->cur_altsetting->desc.bInterfaceNumber);
-
-	printk(KERN_INFO);
-
-	if (hid->claimed & HID_CLAIMED_INPUT)
-		printk("input");
-	if (hid->claimed == (HID_CLAIMED_INPUT | HID_CLAIMED_HIDDEV))
-		printk(",");
-	if (hid->claimed & HID_CLAIMED_HIDDEV)
-		printk("hiddev%d", hid->minor);
-
-	c = "Device";
-	for (i = 0; i < hid->maxcollection; i++) {
-		if (hid->collection[i].type == HID_COLLECTION_APPLICATION &&
-		    (hid->collection[i].usage & HID_USAGE_PAGE) == HID_UP_GENDESK &&
-		    (hid->collection[i].usage & 0xffff) < ARRAY_SIZE(hid_types)) {
-			c = hid_types[hid->collection[i].usage & 0xffff];
-			break;
-		}
-	}
-
-	usb_make_path(interface_to_usbdev(intf), path, 63);
-
-	printk(": USB HID v%x.%02x %s [%s] on %s\n",
-		hid->version >> 8, hid->version & 0xff, c, hid->name, path);
-
-	return 0;
-}
-
-static int hid_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct hid_device *hid = usb_get_intfdata (intf);
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
-	set_bit(HID_SUSPENDED, &usbhid->iofl);
-	spin_unlock_irq(&usbhid->inlock);
-	del_timer(&usbhid->io_retry);
-	usb_kill_urb(usbhid->urbin);
-	dev_dbg(&intf->dev, "suspend\n");
-	return 0;
-}
-
-static int hid_resume(struct usb_interface *intf)
-{
-	struct hid_device *hid = usb_get_intfdata (intf);
-	struct usbhid_device *usbhid = hid->driver_data;
-	int status;
-
-	clear_bit(HID_SUSPENDED, &usbhid->iofl);
-	usbhid->retry_delay = 0;
-	status = hid_start_in(hid);
-	dev_dbg(&intf->dev, "resume status %d\n", status);
-	return status;
-}
-
-/* Treat USB reset pretty much the same as suspend/resume */
-static void hid_pre_reset(struct usb_interface *intf)
-{
-	/* FIXME: What if the interface is already suspended? */
-	hid_suspend(intf, PMSG_ON);
-}
-
-static void hid_post_reset(struct usb_interface *intf)
-{
-	struct usb_device *dev = interface_to_usbdev (intf);
-
-	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
-
-	hid_resume(intf);
-}
-
-static struct usb_device_id hid_usb_ids [] = {
-	{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
-		.bInterfaceClass = USB_INTERFACE_CLASS_HID },
-	{ }						/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, hid_usb_ids);
-
-static struct usb_driver hid_driver = {
-	.name =		"usbhid",
-	.probe =	hid_probe,
-	.disconnect =	hid_disconnect,
-	.suspend =	hid_suspend,
-	.resume =	hid_resume,
-	.pre_reset =	hid_pre_reset,
-	.post_reset =	hid_post_reset,
-	.id_table =	hid_usb_ids,
-};
-
-static int __init hid_init(void)
-{
-	int retval;
-	retval = hiddev_init();
-	if (retval)
-		goto hiddev_init_fail;
-	retval = usb_register(&hid_driver);
-	if (retval)
-		goto usb_register_fail;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
-
-	return 0;
-usb_register_fail:
-	hiddev_exit();
-hiddev_init_fail:
-	return retval;
-}
-
-static void __exit hid_exit(void)
-{
-	usb_deregister(&hid_driver);
-	hiddev_exit();
-}
-
-module_init(hid_init);
-module_exit(hid_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c
deleted file mode 100644
index e431faaa6abc..000000000000
--- a/drivers/usb/input/hid-ff.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * $Id: hid-ff.c,v 1.2 2002/04/18 22:02:47 jdeneux Exp $
- *
- *  Force feedback support for hid devices.
- *  Not all hid devices use the same protocol. For example, some use PID,
- *  other use their own proprietary procotol.
- *
- *  Copyright (c) 2002-2004 Johann Deneux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so by
- * e-mail - mail your message to <johann.deneux@it.uu.se>
- */
-
-#include <linux/input.h>
-
-#undef DEBUG
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include "usbhid.h"
-
-/*
- * This table contains pointers to initializers. To add support for new
- * devices, you need to add the USB vendor and product ids here.
- */
-struct hid_ff_initializer {
-	u16 idVendor;
-	u16 idProduct;
-	int (*init)(struct hid_device*);
-};
-
-/*
- * We try pidff when no other driver is found because PID is the
- * standards compliant way of implementing force feedback in HID.
- * pidff_init() will quickly abort if the device doesn't appear to
- * be a PID device
- */
-static struct hid_ff_initializer inits[] = {
-#ifdef CONFIG_LOGITECH_FF
-	{ 0x46d, 0xc211, hid_lgff_init }, /* Logitech Cordless rumble pad */
-	{ 0x46d, 0xc219, hid_lgff_init }, /* Logitech Cordless rumble pad 2 */
-	{ 0x46d, 0xc283, hid_lgff_init }, /* Logitech Wingman Force 3d */
-	{ 0x46d, 0xc294, hid_lgff_init }, /* Logitech Formula Force EX */
-	{ 0x46d, 0xc295, hid_lgff_init }, /* Logitech MOMO force wheel */
-	{ 0x46d, 0xca03, hid_lgff_init }, /* Logitech MOMO force wheel */
-#endif
-#ifdef CONFIG_PANTHERLORD_FF
-	{ 0x810, 0x0001, hid_plff_init },
-#endif
-#ifdef CONFIG_THRUSTMASTER_FF
-	{ 0x44f, 0xb304, hid_tmff_init },
-#endif
-#ifdef CONFIG_ZEROPLUS_FF
-	{ 0xc12, 0x0005, hid_zpff_init },
-	{ 0xc12, 0x0030, hid_zpff_init },
-#endif
-	{ 0,	 0,	 hid_pidff_init}  /* Matches anything */
-};
-
-int hid_ff_init(struct hid_device* hid)
-{
-	struct hid_ff_initializer *init;
-	int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
-	int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
-
-	for (init = inits; init->idVendor; init++)
-		if (init->idVendor == vendor && init->idProduct == product)
-			break;
-
-	return init->init(hid);
-}
-EXPORT_SYMBOL_GPL(hid_ff_init);
-
diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c
deleted file mode 100644
index e6f3af3e66d1..000000000000
--- a/drivers/usb/input/hid-lgff.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Force feedback support for hid-compliant for some of the devices from
- * Logitech, namely:
- * - WingMan Cordless RumblePad
- * - WingMan Force 3D
- *
- *  Copyright (c) 2002-2004 Johann Deneux
- *  Copyright (c) 2006 Anssi Hannula <anssi.hannula@gmail.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so by
- * e-mail - mail your message to <johann.deneux@it.uu.se>
- */
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/hid.h>
-#include "usbhid.h"
-
-struct dev_type {
-	u16 idVendor;
-	u16 idProduct;
-	const signed short *ff;
-};
-
-static const signed short ff_rumble[] = {
-	FF_RUMBLE,
-	-1
-};
-
-static const signed short ff_joystick[] = {
-	FF_CONSTANT,
-	-1
-};
-
-static const struct dev_type devices[] = {
-	{ 0x046d, 0xc211, ff_rumble },
-	{ 0x046d, 0xc219, ff_rumble },
-	{ 0x046d, 0xc283, ff_joystick },
-	{ 0x046d, 0xc294, ff_joystick },
-	{ 0x046d, 0xc295, ff_joystick },
-	{ 0x046d, 0xca03, ff_joystick },
-};
-
-static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
-{
-	struct hid_device *hid = dev->private;
-	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
-	int x, y;
-	unsigned int left, right;
-
-#define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff
-
-	switch (effect->type) {
-	case FF_CONSTANT:
-		x = effect->u.ramp.start_level + 0x7f;	/* 0x7f is center */
-		y = effect->u.ramp.end_level + 0x7f;
-		CLAMP(x);
-		CLAMP(y);
-		report->field[0]->value[0] = 0x51;
-		report->field[0]->value[1] = 0x08;
-		report->field[0]->value[2] = x;
-		report->field[0]->value[3] = y;
-		dbg("(x, y)=(%04x, %04x)", x, y);
-		usbhid_submit_report(hid, report, USB_DIR_OUT);
-		break;
-
-	case FF_RUMBLE:
-		right = effect->u.rumble.strong_magnitude;
-		left = effect->u.rumble.weak_magnitude;
-		right = right * 0xff / 0xffff;
-		left = left * 0xff / 0xffff;
-		CLAMP(left);
-		CLAMP(right);
-		report->field[0]->value[0] = 0x42;
-		report->field[0]->value[1] = 0x00;
-		report->field[0]->value[2] = left;
-		report->field[0]->value[3] = right;
-		dbg("(left, right)=(%04x, %04x)", left, right);
-		usbhid_submit_report(hid, report, USB_DIR_OUT);
-		break;
-	}
-	return 0;
-}
-
-int hid_lgff_init(struct hid_device* hid)
-{
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
-	struct hid_report *report;
-	struct hid_field *field;
-	const signed short *ff_bits = ff_joystick;
-	int error;
-	int i;
-
-	/* Find the report to use */
-	if (list_empty(report_list)) {
-		err("No output report found");
-		return -1;
-	}
-
-	/* Check that the report looks ok */
-	report = list_entry(report_list->next, struct hid_report, list);
-	if (!report) {
-		err("NULL output report");
-		return -1;
-	}
-
-	field = report->field[0];
-	if (!field) {
-		err("NULL field");
-		return -1;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(devices); i++) {
-		if (dev->id.vendor == devices[i].idVendor &&
-		    dev->id.product == devices[i].idProduct) {
-			ff_bits = devices[i].ff;
-			break;
-		}
-	}
-
-	for (i = 0; ff_bits[i] >= 0; i++)
-		set_bit(ff_bits[i], dev->ffbit);
-
-	error = input_ff_create_memless(dev, NULL, hid_lgff_play);
-	if (error)
-		return error;
-
-	printk(KERN_INFO "Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>\n");
-
-	return 0;
-}
diff --git a/drivers/usb/input/hid-pidff.c b/drivers/usb/input/hid-pidff.c
deleted file mode 100644
index f5a90e950e6b..000000000000
--- a/drivers/usb/input/hid-pidff.c
+++ /dev/null
@@ -1,1331 +0,0 @@
-/*
- *  Force feedback driver for USB HID PID compliant devices
- *
- *  Copyright (c) 2005, 2006 Anssi Hannula <anssi.hannula@gmail.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#define debug(format, arg...) pr_debug("hid-pidff: " format "\n" , ## arg)
-
-#include <linux/input.h>
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-
-#include "usbhid.h"
-
-#define	PID_EFFECTS_MAX		64
-
-/* Report usage table used to put reports into an array */
-
-#define PID_SET_EFFECT		0
-#define PID_EFFECT_OPERATION	1
-#define PID_DEVICE_GAIN		2
-#define PID_POOL		3
-#define PID_BLOCK_LOAD		4
-#define PID_BLOCK_FREE		5
-#define PID_DEVICE_CONTROL	6
-#define PID_CREATE_NEW_EFFECT	7
-
-#define PID_REQUIRED_REPORTS	7
-
-#define PID_SET_ENVELOPE	8
-#define PID_SET_CONDITION	9
-#define PID_SET_PERIODIC	10
-#define PID_SET_CONSTANT	11
-#define PID_SET_RAMP		12
-static const u8 pidff_reports[] = {
-	0x21, 0x77, 0x7d, 0x7f, 0x89, 0x90, 0x96, 0xab,
-	0x5a, 0x5f, 0x6e, 0x73, 0x74
-};
-
-/* device_control is really 0x95, but 0x96 specified as it is the usage of
-the only field in that report */
-
-/* Value usage tables used to put fields and values into arrays */
-
-#define PID_EFFECT_BLOCK_INDEX	0
-
-#define PID_DURATION		1
-#define PID_GAIN		2
-#define PID_TRIGGER_BUTTON	3
-#define PID_TRIGGER_REPEAT_INT	4
-#define PID_DIRECTION_ENABLE	5
-#define PID_START_DELAY		6
-static const u8 pidff_set_effect[] = {
-	0x22, 0x50, 0x52, 0x53, 0x54, 0x56, 0xa7
-};
-
-#define PID_ATTACK_LEVEL	1
-#define PID_ATTACK_TIME		2
-#define PID_FADE_LEVEL		3
-#define PID_FADE_TIME		4
-static const u8 pidff_set_envelope[] = { 0x22, 0x5b, 0x5c, 0x5d, 0x5e };
-
-#define PID_PARAM_BLOCK_OFFSET	1
-#define PID_CP_OFFSET		2
-#define PID_POS_COEFFICIENT	3
-#define PID_NEG_COEFFICIENT	4
-#define PID_POS_SATURATION	5
-#define PID_NEG_SATURATION	6
-#define PID_DEAD_BAND		7
-static const u8 pidff_set_condition[] = {
-	0x22, 0x23, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65
-};
-
-#define PID_MAGNITUDE		1
-#define PID_OFFSET		2
-#define PID_PHASE		3
-#define PID_PERIOD		4
-static const u8 pidff_set_periodic[] = { 0x22, 0x70, 0x6f, 0x71, 0x72 };
-static const u8 pidff_set_constant[] = { 0x22, 0x70 };
-
-#define PID_RAMP_START		1
-#define PID_RAMP_END		2
-static const u8 pidff_set_ramp[] = { 0x22, 0x75, 0x76 };
-
-#define PID_RAM_POOL_AVAILABLE	1
-static const u8 pidff_block_load[] = { 0x22, 0xac };
-
-#define PID_LOOP_COUNT		1
-static const u8 pidff_effect_operation[] = { 0x22, 0x7c };
-
-static const u8 pidff_block_free[] = { 0x22 };
-
-#define PID_DEVICE_GAIN_FIELD	0
-static const u8 pidff_device_gain[] = { 0x7e };
-
-#define PID_RAM_POOL_SIZE	0
-#define PID_SIMULTANEOUS_MAX	1
-#define PID_DEVICE_MANAGED_POOL	2
-static const u8 pidff_pool[] = { 0x80, 0x83, 0xa9 };
-
-/* Special field key tables used to put special field keys into arrays */
-
-#define PID_ENABLE_ACTUATORS	0
-#define PID_RESET		1
-static const u8 pidff_device_control[] = { 0x97, 0x9a };
-
-#define PID_CONSTANT	0
-#define PID_RAMP	1
-#define PID_SQUARE	2
-#define PID_SINE	3
-#define PID_TRIANGLE	4
-#define PID_SAW_UP	5
-#define PID_SAW_DOWN	6
-#define PID_SPRING	7
-#define PID_DAMPER	8
-#define PID_INERTIA	9
-#define PID_FRICTION	10
-static const u8 pidff_effect_types[] = {
-	0x26, 0x27, 0x30, 0x31, 0x32, 0x33, 0x34,
-	0x40, 0x41, 0x42, 0x43
-};
-
-#define PID_BLOCK_LOAD_SUCCESS	0
-#define PID_BLOCK_LOAD_FULL	1
-static const u8 pidff_block_load_status[] = { 0x8c, 0x8d };
-
-#define PID_EFFECT_START	0
-#define PID_EFFECT_STOP		1
-static const u8 pidff_effect_operation_status[] = { 0x79, 0x7b };
-
-struct pidff_usage {
-	struct hid_field *field;
-	s32 *value;
-};
-
-struct pidff_device {
-	struct hid_device *hid;
-
-	struct hid_report *reports[sizeof(pidff_reports)];
-
-	struct pidff_usage set_effect[sizeof(pidff_set_effect)];
-	struct pidff_usage set_envelope[sizeof(pidff_set_envelope)];
-	struct pidff_usage set_condition[sizeof(pidff_set_condition)];
-	struct pidff_usage set_periodic[sizeof(pidff_set_periodic)];
-	struct pidff_usage set_constant[sizeof(pidff_set_constant)];
-	struct pidff_usage set_ramp[sizeof(pidff_set_ramp)];
-
-	struct pidff_usage device_gain[sizeof(pidff_device_gain)];
-	struct pidff_usage block_load[sizeof(pidff_block_load)];
-	struct pidff_usage pool[sizeof(pidff_pool)];
-	struct pidff_usage effect_operation[sizeof(pidff_effect_operation)];
-	struct pidff_usage block_free[sizeof(pidff_block_free)];
-
-	/* Special field is a field that is not composed of
-	   usage<->value pairs that pidff_usage values are */
-
-	/* Special field in create_new_effect */
-	struct hid_field *create_new_effect_type;
-
-	/* Special fields in set_effect */
-	struct hid_field *set_effect_type;
-	struct hid_field *effect_direction;
-
-	/* Special field in device_control */
-	struct hid_field *device_control;
-
-	/* Special field in block_load */
-	struct hid_field *block_load_status;
-
-	/* Special field in effect_operation */
-	struct hid_field *effect_operation_status;
-
-	int control_id[sizeof(pidff_device_control)];
-	int type_id[sizeof(pidff_effect_types)];
-	int status_id[sizeof(pidff_block_load_status)];
-	int operation_id[sizeof(pidff_effect_operation_status)];
-
-	int pid_id[PID_EFFECTS_MAX];
-};
-
-/*
- * Scale an unsigned value with range 0..max for the given field
- */
-static int pidff_rescale(int i, int max, struct hid_field *field)
-{
-	return i * (field->logical_maximum - field->logical_minimum) / max +
-	    field->logical_minimum;
-}
-
-/*
- * Scale a signed value in range -0x8000..0x7fff for the given field
- */
-static int pidff_rescale_signed(int i, struct hid_field *field)
-{
-	return i == 0 ? 0 : i >
-	    0 ? i * field->logical_maximum / 0x7fff : i *
-	    field->logical_minimum / -0x8000;
-}
-
-static void pidff_set(struct pidff_usage *usage, u16 value)
-{
-	usage->value[0] = pidff_rescale(value, 0xffff, usage->field);
-	debug("calculated from %d to %d", value, usage->value[0]);
-}
-
-static void pidff_set_signed(struct pidff_usage *usage, s16 value)
-{
-	if (usage->field->logical_minimum < 0)
-		usage->value[0] = pidff_rescale_signed(value, usage->field);
-	else {
-		if (value < 0)
-			usage->value[0] =
-			    pidff_rescale(-value, 0x8000, usage->field);
-		else
-			usage->value[0] =
-			    pidff_rescale(value, 0x7fff, usage->field);
-	}
-	debug("calculated from %d to %d", value, usage->value[0]);
-}
-
-/*
- * Send envelope report to the device
- */
-static void pidff_set_envelope_report(struct pidff_device *pidff,
-				      struct ff_envelope *envelope)
-{
-	pidff->set_envelope[PID_EFFECT_BLOCK_INDEX].value[0] =
-	    pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-
-	pidff->set_envelope[PID_ATTACK_LEVEL].value[0] =
-	    pidff_rescale(envelope->attack_level >
-			  0x7fff ? 0x7fff : envelope->attack_level, 0x7fff,
-			  pidff->set_envelope[PID_ATTACK_LEVEL].field);
-	pidff->set_envelope[PID_FADE_LEVEL].value[0] =
-	    pidff_rescale(envelope->fade_level >
-			  0x7fff ? 0x7fff : envelope->fade_level, 0x7fff,
-			  pidff->set_envelope[PID_FADE_LEVEL].field);
-
-	pidff->set_envelope[PID_ATTACK_TIME].value[0] = envelope->attack_length;
-	pidff->set_envelope[PID_FADE_TIME].value[0] = envelope->fade_length;
-
-	debug("attack %u => %d", envelope->attack_level,
-	      pidff->set_envelope[PID_ATTACK_LEVEL].value[0]);
-
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
-			  USB_DIR_OUT);
-}
-
-/*
- * Test if the new envelope differs from old one
- */
-static int pidff_needs_set_envelope(struct ff_envelope *envelope,
-				    struct ff_envelope *old)
-{
-	return envelope->attack_level != old->attack_level ||
-	       envelope->fade_level != old->fade_level ||
-	       envelope->attack_length != old->attack_length ||
-	       envelope->fade_length != old->fade_length;
-}
-
-/*
- * Send constant force report to the device
- */
-static void pidff_set_constant_force_report(struct pidff_device *pidff,
-					    struct ff_effect *effect)
-{
-	pidff->set_constant[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-	pidff_set_signed(&pidff->set_constant[PID_MAGNITUDE],
-			 effect->u.constant.level);
-
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT],
-			  USB_DIR_OUT);
-}
-
-/*
- * Test if the constant parameters have changed between effects
- */
-static int pidff_needs_set_constant(struct ff_effect *effect,
-				    struct ff_effect *old)
-{
-	return effect->u.constant.level != old->u.constant.level;
-}
-
-/*
- * Send set effect report to the device
- */
-static void pidff_set_effect_report(struct pidff_device *pidff,
-				    struct ff_effect *effect)
-{
-	pidff->set_effect[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-	pidff->set_effect_type->value[0] =
-		pidff->create_new_effect_type->value[0];
-	pidff->set_effect[PID_DURATION].value[0] = effect->replay.length;
-	pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = effect->trigger.button;
-	pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] =
-		effect->trigger.interval;
-	pidff->set_effect[PID_GAIN].value[0] =
-		pidff->set_effect[PID_GAIN].field->logical_maximum;
-	pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = 1;
-	pidff->effect_direction->value[0] =
-		pidff_rescale(effect->direction, 0xffff,
-				pidff->effect_direction);
-	pidff->set_effect[PID_START_DELAY].value[0] = effect->replay.delay;
-
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
-			  USB_DIR_OUT);
-}
-
-/*
- * Test if the values used in set_effect have changed
- */
-static int pidff_needs_set_effect(struct ff_effect *effect,
-				  struct ff_effect *old)
-{
-	return effect->replay.length != old->replay.length ||
-	       effect->trigger.interval != old->trigger.interval ||
-	       effect->trigger.button != old->trigger.button ||
-	       effect->direction != old->direction ||
-	       effect->replay.delay != old->replay.delay;
-}
-
-/*
- * Send periodic effect report to the device
- */
-static void pidff_set_periodic_report(struct pidff_device *pidff,
-				      struct ff_effect *effect)
-{
-	pidff->set_periodic[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-	pidff_set_signed(&pidff->set_periodic[PID_MAGNITUDE],
-			 effect->u.periodic.magnitude);
-	pidff_set_signed(&pidff->set_periodic[PID_OFFSET],
-			 effect->u.periodic.offset);
-	pidff_set(&pidff->set_periodic[PID_PHASE], effect->u.periodic.phase);
-	pidff->set_periodic[PID_PERIOD].value[0] = effect->u.periodic.period;
-
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC],
-			  USB_DIR_OUT);
-
-}
-
-/*
- * Test if periodic effect parameters have changed
- */
-static int pidff_needs_set_periodic(struct ff_effect *effect,
-				    struct ff_effect *old)
-{
-	return effect->u.periodic.magnitude != old->u.periodic.magnitude ||
-	       effect->u.periodic.offset != old->u.periodic.offset ||
-	       effect->u.periodic.phase != old->u.periodic.phase ||
-	       effect->u.periodic.period != old->u.periodic.period;
-}
-
-/*
- * Send condition effect reports to the device
- */
-static void pidff_set_condition_report(struct pidff_device *pidff,
-				       struct ff_effect *effect)
-{
-	int i;
-
-	pidff->set_condition[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-
-	for (i = 0; i < 2; i++) {
-		pidff->set_condition[PID_PARAM_BLOCK_OFFSET].value[0] = i;
-		pidff_set_signed(&pidff->set_condition[PID_CP_OFFSET],
-				 effect->u.condition[i].center);
-		pidff_set_signed(&pidff->set_condition[PID_POS_COEFFICIENT],
-				 effect->u.condition[i].right_coeff);
-		pidff_set_signed(&pidff->set_condition[PID_NEG_COEFFICIENT],
-				 effect->u.condition[i].left_coeff);
-		pidff_set(&pidff->set_condition[PID_POS_SATURATION],
-			  effect->u.condition[i].right_saturation);
-		pidff_set(&pidff->set_condition[PID_NEG_SATURATION],
-			  effect->u.condition[i].left_saturation);
-		pidff_set(&pidff->set_condition[PID_DEAD_BAND],
-			  effect->u.condition[i].deadband);
-		usbhid_wait_io(pidff->hid);
-		usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION],
-				  USB_DIR_OUT);
-	}
-}
-
-/*
- * Test if condition effect parameters have changed
- */
-static int pidff_needs_set_condition(struct ff_effect *effect,
-				     struct ff_effect *old)
-{
-	int i;
-	int ret = 0;
-
-	for (i = 0; i < 2; i++) {
-		struct ff_condition_effect *cond = &effect->u.condition[i];
-		struct ff_condition_effect *old_cond = &old->u.condition[i];
-
-		ret |= cond->center != old_cond->center ||
-		       cond->right_coeff != old_cond->right_coeff ||
-		       cond->left_coeff != old_cond->left_coeff ||
-		       cond->right_saturation != old_cond->right_saturation ||
-		       cond->left_saturation != old_cond->left_saturation ||
-		       cond->deadband != old_cond->deadband;
-	}
-
-	return ret;
-}
-
-/*
- * Send ramp force report to the device
- */
-static void pidff_set_ramp_force_report(struct pidff_device *pidff,
-					struct ff_effect *effect)
-{
-	pidff->set_ramp[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-	pidff_set_signed(&pidff->set_ramp[PID_RAMP_START],
-			 effect->u.ramp.start_level);
-	pidff_set_signed(&pidff->set_ramp[PID_RAMP_END],
-			 effect->u.ramp.end_level);
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP],
-			  USB_DIR_OUT);
-}
-
-/*
- * Test if ramp force parameters have changed
- */
-static int pidff_needs_set_ramp(struct ff_effect *effect, struct ff_effect *old)
-{
-	return effect->u.ramp.start_level != old->u.ramp.start_level ||
-	       effect->u.ramp.end_level != old->u.ramp.end_level;
-}
-
-/*
- * Send a request for effect upload to the device
- *
- * Returns 0 if device reported success, -ENOSPC if the device reported memory
- * is full. Upon unknown response the function will retry for 60 times, if
- * still unsuccessful -EIO is returned.
- */
-static int pidff_request_effect_upload(struct pidff_device *pidff, int efnum)
-{
-	int j;
-
-	pidff->create_new_effect_type->value[0] = efnum;
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
-			  USB_DIR_OUT);
-	debug("create_new_effect sent, type: %d", efnum);
-
-	pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0;
-	pidff->block_load_status->value[0] = 0;
-	usbhid_wait_io(pidff->hid);
-
-	for (j = 0; j < 60; j++) {
-		debug("pid_block_load requested");
-		usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
-				  USB_DIR_IN);
-		usbhid_wait_io(pidff->hid);
-		if (pidff->block_load_status->value[0] ==
-		    pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) {
-			debug("device reported free memory: %d bytes",
-			      pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
-				pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1);
-			return 0;
-		}
-		if (pidff->block_load_status->value[0] ==
-		    pidff->status_id[PID_BLOCK_LOAD_FULL]) {
-			debug("not enough memory free: %d bytes",
-			      pidff->block_load[PID_RAM_POOL_AVAILABLE].value ?
-				pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1);
-			return -ENOSPC;
-		}
-	}
-	printk(KERN_ERR "hid-pidff: pid_block_load failed 60 times\n");
-	return -EIO;
-}
-
-/*
- * Play the effect with PID id n times
- */
-static void pidff_playback_pid(struct pidff_device *pidff, int pid_id, int n)
-{
-	pidff->effect_operation[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id;
-
-	if (n == 0) {
-		pidff->effect_operation_status->value[0] =
-			pidff->operation_id[PID_EFFECT_STOP];
-	} else {
-		pidff->effect_operation_status->value[0] =
-			pidff->operation_id[PID_EFFECT_START];
-		pidff->effect_operation[PID_LOOP_COUNT].value[0] = n;
-	}
-
-	usbhid_wait_io(pidff->hid);
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION],
-			  USB_DIR_OUT);
-}
-
-/**
- * Play the effect with effect id @effect_id for @value times
- */
-static int pidff_playback(struct input_dev *dev, int effect_id, int value)
-{
-	struct pidff_device *pidff = dev->ff->private;
-
-	pidff_playback_pid(pidff, pidff->pid_id[effect_id], value);
-
-	return 0;
-}
-
-/*
- * Erase effect with PID id
- */
-static void pidff_erase_pid(struct pidff_device *pidff, int pid_id)
-{
-	pidff->block_free[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id;
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE],
-			  USB_DIR_OUT);
-}
-
-/*
- * Stop and erase effect with effect_id
- */
-static int pidff_erase_effect(struct input_dev *dev, int effect_id)
-{
-	struct pidff_device *pidff = dev->ff->private;
-	int pid_id = pidff->pid_id[effect_id];
-
-	debug("starting to erase %d/%d", effect_id, pidff->pid_id[effect_id]);
-	pidff_playback_pid(pidff, pid_id, 0);
-	pidff_erase_pid(pidff, pid_id);
-
-	return 0;
-}
-
-/*
- * Effect upload handler
- */
-static int pidff_upload_effect(struct input_dev *dev, struct ff_effect *effect,
-			       struct ff_effect *old)
-{
-	struct pidff_device *pidff = dev->ff->private;
-	int type_id;
-	int error;
-
-	switch (effect->type) {
-	case FF_CONSTANT:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_CONSTANT]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_constant(effect, old))
-			pidff_set_constant_force_report(pidff, effect);
-		if (!old ||
-		    pidff_needs_set_envelope(&effect->u.constant.envelope,
-					&old->u.constant.envelope))
-			pidff_set_envelope_report(pidff,
-					&effect->u.constant.envelope);
-		break;
-
-	case FF_PERIODIC:
-		if (!old) {
-			switch (effect->u.periodic.waveform) {
-			case FF_SQUARE:
-				type_id = PID_SQUARE;
-				break;
-			case FF_TRIANGLE:
-				type_id = PID_TRIANGLE;
-				break;
-			case FF_SINE:
-				type_id = PID_SINE;
-				break;
-			case FF_SAW_UP:
-				type_id = PID_SAW_UP;
-				break;
-			case FF_SAW_DOWN:
-				type_id = PID_SAW_DOWN;
-				break;
-			default:
-				printk(KERN_ERR
-				       "hid-pidff: invalid waveform\n");
-				return -EINVAL;
-			}
-
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[type_id]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_periodic(effect, old))
-			pidff_set_periodic_report(pidff, effect);
-		if (!old ||
-		    pidff_needs_set_envelope(&effect->u.periodic.envelope,
-					&old->u.periodic.envelope))
-			pidff_set_envelope_report(pidff,
-					&effect->u.periodic.envelope);
-		break;
-
-	case FF_RAMP:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_RAMP]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_ramp(effect, old))
-			pidff_set_ramp_force_report(pidff, effect);
-		if (!old ||
-		    pidff_needs_set_envelope(&effect->u.ramp.envelope,
-					&old->u.ramp.envelope))
-			pidff_set_envelope_report(pidff,
-					&effect->u.ramp.envelope);
-		break;
-
-	case FF_SPRING:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_SPRING]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_condition(effect, old))
-			pidff_set_condition_report(pidff, effect);
-		break;
-
-	case FF_FRICTION:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_FRICTION]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_condition(effect, old))
-			pidff_set_condition_report(pidff, effect);
-		break;
-
-	case FF_DAMPER:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_DAMPER]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_condition(effect, old))
-			pidff_set_condition_report(pidff, effect);
-		break;
-
-	case FF_INERTIA:
-		if (!old) {
-			error = pidff_request_effect_upload(pidff,
-					pidff->type_id[PID_INERTIA]);
-			if (error)
-				return error;
-		}
-		if (!old || pidff_needs_set_effect(effect, old))
-			pidff_set_effect_report(pidff, effect);
-		if (!old || pidff_needs_set_condition(effect, old))
-			pidff_set_condition_report(pidff, effect);
-		break;
-
-	default:
-		printk(KERN_ERR "hid-pidff: invalid type\n");
-		return -EINVAL;
-	}
-
-	if (!old)
-		pidff->pid_id[effect->id] =
-		    pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0];
-
-	debug("uploaded");
-
-	return 0;
-}
-
-/*
- * set_gain() handler
- */
-static void pidff_set_gain(struct input_dev *dev, u16 gain)
-{
-	struct pidff_device *pidff = dev->ff->private;
-
-	pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], gain);
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
-			  USB_DIR_OUT);
-}
-
-static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude)
-{
-	struct hid_field *field =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].field;
-
-	if (!magnitude) {
-		pidff_playback_pid(pidff, field->logical_minimum, 0);
-		return;
-	}
-
-	pidff_playback_pid(pidff, field->logical_minimum, 1);
-
-	pidff->set_effect[PID_EFFECT_BLOCK_INDEX].value[0] =
-		pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum;
-	pidff->set_effect_type->value[0] = pidff->type_id[PID_SPRING];
-	pidff->set_effect[PID_DURATION].value[0] = 0;
-	pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = 0;
-	pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] = 0;
-	pidff_set(&pidff->set_effect[PID_GAIN], magnitude);
-	pidff->set_effect[PID_START_DELAY].value[0] = 0;
-
-	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
-			  USB_DIR_OUT);
-}
-
-/*
- * pidff_set_autocenter() handler
- */
-static void pidff_set_autocenter(struct input_dev *dev, u16 magnitude)
-{
-	struct pidff_device *pidff = dev->ff->private;
-
-	pidff_autocenter(pidff, magnitude);
-}
-
-/*
- * Find fields from a report and fill a pidff_usage
- */
-static int pidff_find_fields(struct pidff_usage *usage, const u8 *table,
-			     struct hid_report *report, int count, int strict)
-{
-	int i, j, k, found;
-
-	for (k = 0; k < count; k++) {
-		found = 0;
-		for (i = 0; i < report->maxfield; i++) {
-			if (report->field[i]->maxusage !=
-			    report->field[i]->report_count) {
-				debug("maxusage and report_count do not match, "
-				      "skipping");
-				continue;
-			}
-			for (j = 0; j < report->field[i]->maxusage; j++) {
-				if (report->field[i]->usage[j].hid ==
-				    (HID_UP_PID | table[k])) {
-					debug("found %d at %d->%d", k, i, j);
-					usage[k].field = report->field[i];
-					usage[k].value =
-						&report->field[i]->value[j];
-					found = 1;
-					break;
-				}
-			}
-			if (found)
-				break;
-		}
-		if (!found && strict) {
-			debug("failed to locate %d", k);
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Return index into pidff_reports for the given usage
- */
-static int pidff_check_usage(int usage)
-{
-	int i;
-
-	for (i = 0; i < sizeof(pidff_reports); i++)
-		if (usage == (HID_UP_PID | pidff_reports[i]))
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the reports and fill pidff->reports[]
- * report_type specifies either OUTPUT or FEATURE reports
- */
-static void pidff_find_reports(struct hid_device *hid, int report_type,
-			       struct pidff_device *pidff)
-{
-	struct hid_report *report;
-	int i, ret;
-
-	list_for_each_entry(report,
-			    &hid->report_enum[report_type].report_list, list) {
-		if (report->maxfield < 1)
-			continue;
-		ret = pidff_check_usage(report->field[0]->logical);
-		if (ret != -1) {
-			debug("found usage 0x%02x from field->logical",
-			      pidff_reports[ret]);
-			pidff->reports[ret] = report;
-			continue;
-		}
-
-		/*
-		 * Sometimes logical collections are stacked to indicate
-		 * different usages for the report and the field, in which
-		 * case we want the usage of the parent. However, Linux HID
-		 * implementation hides this fact, so we have to dig it up
-		 * ourselves
-		 */
-		i = report->field[0]->usage[0].collection_index;
-		if (i <= 0 ||
-		    hid->collection[i - 1].type != HID_COLLECTION_LOGICAL)
-			continue;
-		ret = pidff_check_usage(hid->collection[i - 1].usage);
-		if (ret != -1 && !pidff->reports[ret]) {
-			debug("found usage 0x%02x from collection array",
-			      pidff_reports[ret]);
-			pidff->reports[ret] = report;
-		}
-	}
-}
-
-/*
- * Test if the required reports have been found
- */
-static int pidff_reports_ok(struct pidff_device *pidff)
-{
-	int i;
-
-	for (i = 0; i <= PID_REQUIRED_REPORTS; i++) {
-		if (!pidff->reports[i]) {
-			debug("%d missing", i);
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
-/*
- * Find a field with a specific usage within a report
- */
-static struct hid_field *pidff_find_special_field(struct hid_report *report,
-						  int usage, int enforce_min)
-{
-	int i;
-
-	for (i = 0; i < report->maxfield; i++) {
-		if (report->field[i]->logical == (HID_UP_PID | usage) &&
-		    report->field[i]->report_count > 0) {
-			if (!enforce_min ||
-			    report->field[i]->logical_minimum == 1)
-				return report->field[i];
-			else {
-				printk(KERN_ERR "hid-pidff: logical_minimum "
-					"is not 1 as it should be\n");
-				return NULL;
-			}
-		}
-	}
-	return NULL;
-}
-
-/*
- * Fill a pidff->*_id struct table
- */
-static int pidff_find_special_keys(int *keys, struct hid_field *fld,
-				   const u8 *usagetable, int count)
-{
-
-	int i, j;
-	int found = 0;
-
-	for (i = 0; i < count; i++) {
-		for (j = 0; j < fld->maxusage; j++) {
-			if (fld->usage[j].hid == (HID_UP_PID | usagetable[i])) {
-				keys[i] = j + 1;
-				found++;
-				break;
-			}
-		}
-	}
-	return found;
-}
-
-#define PIDFF_FIND_SPECIAL_KEYS(keys, field, name) \
-	pidff_find_special_keys(pidff->keys, pidff->field, pidff_ ## name, \
-		sizeof(pidff_ ## name))
-
-/*
- * Find and check the special fields
- */
-static int pidff_find_special_fields(struct pidff_device *pidff)
-{
-	debug("finding special fields");
-
-	pidff->create_new_effect_type =
-		pidff_find_special_field(pidff->reports[PID_CREATE_NEW_EFFECT],
-					 0x25, 1);
-	pidff->set_effect_type =
-		pidff_find_special_field(pidff->reports[PID_SET_EFFECT],
-					 0x25, 1);
-	pidff->effect_direction =
-		pidff_find_special_field(pidff->reports[PID_SET_EFFECT],
-					 0x57, 0);
-	pidff->device_control =
-		pidff_find_special_field(pidff->reports[PID_DEVICE_CONTROL],
-					 0x96, 1);
-	pidff->block_load_status =
-		pidff_find_special_field(pidff->reports[PID_BLOCK_LOAD],
-					 0x8b, 1);
-	pidff->effect_operation_status =
-		pidff_find_special_field(pidff->reports[PID_EFFECT_OPERATION],
-					 0x78, 1);
-
-	debug("search done");
-
-	if (!pidff->create_new_effect_type || !pidff->set_effect_type) {
-		printk(KERN_ERR "hid-pidff: effect lists not found\n");
-		return -1;
-	}
-
-	if (!pidff->effect_direction) {
-		printk(KERN_ERR "hid-pidff: direction field not found\n");
-		return -1;
-	}
-
-	if (!pidff->device_control) {
-		printk(KERN_ERR "hid-pidff: device control field not found\n");
-		return -1;
-	}
-
-	if (!pidff->block_load_status) {
-		printk(KERN_ERR
-		       "hid-pidff: block load status field not found\n");
-		return -1;
-	}
-
-	if (!pidff->effect_operation_status) {
-		printk(KERN_ERR
-		       "hid-pidff: effect operation field not found\n");
-		return -1;
-	}
-
-	pidff_find_special_keys(pidff->control_id, pidff->device_control,
-				pidff_device_control,
-				sizeof(pidff_device_control));
-
-	PIDFF_FIND_SPECIAL_KEYS(control_id, device_control, device_control);
-
-	if (!PIDFF_FIND_SPECIAL_KEYS(type_id, create_new_effect_type,
-				     effect_types)) {
-		printk(KERN_ERR "hid-pidff: no effect types found\n");
-		return -1;
-	}
-
-	if (PIDFF_FIND_SPECIAL_KEYS(status_id, block_load_status,
-				    block_load_status) !=
-			sizeof(pidff_block_load_status)) {
-		printk(KERN_ERR
-		       "hidpidff: block load status identifiers not found\n");
-		return -1;
-	}
-
-	if (PIDFF_FIND_SPECIAL_KEYS(operation_id, effect_operation_status,
-				    effect_operation_status) !=
-			sizeof(pidff_effect_operation_status)) {
-		printk(KERN_ERR
-		       "hidpidff: effect operation identifiers not found\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-/**
- * Find the implemented effect types
- */
-static int pidff_find_effects(struct pidff_device *pidff,
-			      struct input_dev *dev)
-{
-	int i;
-
-	for (i = 0; i < sizeof(pidff_effect_types); i++) {
-		int pidff_type = pidff->type_id[i];
-		if (pidff->set_effect_type->usage[pidff_type].hid !=
-		    pidff->create_new_effect_type->usage[pidff_type].hid) {
-			printk(KERN_ERR "hid-pidff: "
-			       "effect type number %d is invalid\n", i);
-			return -1;
-		}
-	}
-
-	if (pidff->type_id[PID_CONSTANT])
-		set_bit(FF_CONSTANT, dev->ffbit);
-	if (pidff->type_id[PID_RAMP])
-		set_bit(FF_RAMP, dev->ffbit);
-	if (pidff->type_id[PID_SQUARE]) {
-		set_bit(FF_SQUARE, dev->ffbit);
-		set_bit(FF_PERIODIC, dev->ffbit);
-	}
-	if (pidff->type_id[PID_SINE]) {
-		set_bit(FF_SINE, dev->ffbit);
-		set_bit(FF_PERIODIC, dev->ffbit);
-	}
-	if (pidff->type_id[PID_TRIANGLE]) {
-		set_bit(FF_TRIANGLE, dev->ffbit);
-		set_bit(FF_PERIODIC, dev->ffbit);
-	}
-	if (pidff->type_id[PID_SAW_UP]) {
-		set_bit(FF_SAW_UP, dev->ffbit);
-		set_bit(FF_PERIODIC, dev->ffbit);
-	}
-	if (pidff->type_id[PID_SAW_DOWN]) {
-		set_bit(FF_SAW_DOWN, dev->ffbit);
-		set_bit(FF_PERIODIC, dev->ffbit);
-	}
-	if (pidff->type_id[PID_SPRING])
-		set_bit(FF_SPRING, dev->ffbit);
-	if (pidff->type_id[PID_DAMPER])
-		set_bit(FF_DAMPER, dev->ffbit);
-	if (pidff->type_id[PID_INERTIA])
-		set_bit(FF_INERTIA, dev->ffbit);
-	if (pidff->type_id[PID_FRICTION])
-		set_bit(FF_FRICTION, dev->ffbit);
-
-	return 0;
-
-}
-
-#define PIDFF_FIND_FIELDS(name, report, strict) \
-	pidff_find_fields(pidff->name, pidff_ ## name, \
-		pidff->reports[report], \
-		sizeof(pidff_ ## name), strict)
-
-/*
- * Fill and check the pidff_usages
- */
-static int pidff_init_fields(struct pidff_device *pidff, struct input_dev *dev)
-{
-	int envelope_ok = 0;
-
-	if (PIDFF_FIND_FIELDS(set_effect, PID_SET_EFFECT, 1)) {
-		printk(KERN_ERR
-		       "hid-pidff: unknown set_effect report layout\n");
-		return -ENODEV;
-	}
-
-	PIDFF_FIND_FIELDS(block_load, PID_BLOCK_LOAD, 0);
-	if (!pidff->block_load[PID_EFFECT_BLOCK_INDEX].value) {
-		printk(KERN_ERR
-		       "hid-pidff: unknown pid_block_load report layout\n");
-		return -ENODEV;
-	}
-
-	if (PIDFF_FIND_FIELDS(effect_operation, PID_EFFECT_OPERATION, 1)) {
-		printk(KERN_ERR
-		       "hid-pidff: unknown effect_operation report layout\n");
-		return -ENODEV;
-	}
-
-	if (PIDFF_FIND_FIELDS(block_free, PID_BLOCK_FREE, 1)) {
-		printk(KERN_ERR
-		       "hid-pidff: unknown pid_block_free report layout\n");
-		return -ENODEV;
-	}
-
-	if (!PIDFF_FIND_FIELDS(set_envelope, PID_SET_ENVELOPE, 1))
-		envelope_ok = 1;
-
-	if (pidff_find_special_fields(pidff) || pidff_find_effects(pidff, dev))
-		return -ENODEV;
-
-	if (!envelope_ok) {
-		if (test_and_clear_bit(FF_CONSTANT, dev->ffbit))
-			printk(KERN_WARNING "hid-pidff: "
-			       "has constant effect but no envelope\n");
-		if (test_and_clear_bit(FF_RAMP, dev->ffbit))
-			printk(KERN_WARNING "hid-pidff: "
-				"has ramp effect but no envelope\n");
-
-		if (test_and_clear_bit(FF_PERIODIC, dev->ffbit))
-			printk(KERN_WARNING "hid-pidff: "
-				"has periodic effect but no envelope\n");
-	}
-
-	if (test_bit(FF_CONSTANT, dev->ffbit) &&
-	    PIDFF_FIND_FIELDS(set_constant, PID_SET_CONSTANT, 1)) {
-		printk(KERN_WARNING
-		       "hid-pidff: unknown constant effect layout\n");
-		clear_bit(FF_CONSTANT, dev->ffbit);
-	}
-
-	if (test_bit(FF_RAMP, dev->ffbit) &&
-	    PIDFF_FIND_FIELDS(set_ramp, PID_SET_RAMP, 1)) {
-		printk(KERN_WARNING "hid-pidff: unknown ramp effect layout\n");
-		clear_bit(FF_RAMP, dev->ffbit);
-	}
-
-	if ((test_bit(FF_SPRING, dev->ffbit) ||
-	     test_bit(FF_DAMPER, dev->ffbit) ||
-	     test_bit(FF_FRICTION, dev->ffbit) ||
-	     test_bit(FF_INERTIA, dev->ffbit)) &&
-	    PIDFF_FIND_FIELDS(set_condition, PID_SET_CONDITION, 1)) {
-		printk(KERN_WARNING
-		       "hid-pidff: unknown condition effect layout\n");
-		clear_bit(FF_SPRING, dev->ffbit);
-		clear_bit(FF_DAMPER, dev->ffbit);
-		clear_bit(FF_FRICTION, dev->ffbit);
-		clear_bit(FF_INERTIA, dev->ffbit);
-	}
-
-	if (test_bit(FF_PERIODIC, dev->ffbit) &&
-	    PIDFF_FIND_FIELDS(set_periodic, PID_SET_PERIODIC, 1)) {
-		printk(KERN_WARNING
-		       "hid-pidff: unknown periodic effect layout\n");
-		clear_bit(FF_PERIODIC, dev->ffbit);
-	}
-
-	PIDFF_FIND_FIELDS(pool, PID_POOL, 0);
-
-	if (!PIDFF_FIND_FIELDS(device_gain, PID_DEVICE_GAIN, 1))
-		set_bit(FF_GAIN, dev->ffbit);
-
-	return 0;
-}
-
-/*
- * Reset the device
- */
-static void pidff_reset(struct pidff_device *pidff)
-{
-	struct hid_device *hid = pidff->hid;
-	int i = 0;
-
-	pidff->device_control->value[0] = pidff->control_id[PID_RESET];
-	/* We reset twice as sometimes hid_wait_io isn't waiting long enough */
-	usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
-	usbhid_wait_io(hid);
-	usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
-	usbhid_wait_io(hid);
-
-	pidff->device_control->value[0] =
-		pidff->control_id[PID_ENABLE_ACTUATORS];
-	usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
-	usbhid_wait_io(hid);
-
-	/* pool report is sometimes messed up, refetch it */
-	usbhid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN);
-	usbhid_wait_io(hid);
-
-	if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
-		int sim_effects = pidff->pool[PID_SIMULTANEOUS_MAX].value[0];
-		while (sim_effects < 2) {
-			if (i++ > 20) {
-				printk(KERN_WARNING "hid-pidff: device reports "
-				       "%d simultaneous effects\n",
-				       sim_effects);
-				break;
-			}
-			debug("pid_pool requested again");
-			usbhid_submit_report(hid, pidff->reports[PID_POOL],
-					  USB_DIR_IN);
-			usbhid_wait_io(hid);
-		}
-	}
-}
-
-/*
- * Test if autocenter modification is using the supported method
- */
-static int pidff_check_autocenter(struct pidff_device *pidff,
-				  struct input_dev *dev)
-{
-	int error;
-
-	/*
-	 * Let's find out if autocenter modification is supported
-	 * Specification doesn't specify anything, so we request an
-	 * effect upload and cancel it immediately. If the approved
-	 * effect id was one above the minimum, then we assume the first
-	 * effect id is a built-in spring type effect used for autocenter
-	 */
-
-	error = pidff_request_effect_upload(pidff, 1);
-	if (error) {
-		printk(KERN_ERR "hid-pidff: upload request failed\n");
-		return error;
-	}
-
-	if (pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] ==
-	    pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum + 1) {
-		pidff_autocenter(pidff, 0xffff);
-		set_bit(FF_AUTOCENTER, dev->ffbit);
-	} else {
-		printk(KERN_NOTICE "hid-pidff: "
-		       "device has unknown autocenter control method\n");
-	}
-
-	pidff_erase_pid(pidff,
-			pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]);
-
-	return 0;
-
-}
-
-/*
- * Check if the device is PID and initialize it
- */
-int hid_pidff_init(struct hid_device *hid)
-{
-	struct pidff_device *pidff;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
-	struct input_dev *dev = hidinput->input;
-	struct ff_device *ff;
-	int max_effects;
-	int error;
-
-	debug("starting pid init");
-
-	if (list_empty(&hid->report_enum[HID_OUTPUT_REPORT].report_list)) {
-		debug("not a PID device, no output report");
-		return -ENODEV;
-	}
-
-	pidff = kzalloc(sizeof(*pidff), GFP_KERNEL);
-	if (!pidff)
-		return -ENOMEM;
-
-	pidff->hid = hid;
-
-	pidff_find_reports(hid, HID_OUTPUT_REPORT, pidff);
-	pidff_find_reports(hid, HID_FEATURE_REPORT, pidff);
-
-	if (!pidff_reports_ok(pidff)) {
-		debug("reports not ok, aborting");
-		error = -ENODEV;
-		goto fail;
-	}
-
-	error = pidff_init_fields(pidff, dev);
-	if (error)
-		goto fail;
-
-	pidff_reset(pidff);
-
-	if (test_bit(FF_GAIN, dev->ffbit)) {
-		pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], 0xffff);
-		usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
-				  USB_DIR_OUT);
-	}
-
-	error = pidff_check_autocenter(pidff, dev);
-	if (error)
-		goto fail;
-
-	max_effects =
-	    pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_maximum -
-	    pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum +
-	    1;
-	debug("max effects is %d", max_effects);
-
-	if (max_effects > PID_EFFECTS_MAX)
-		max_effects = PID_EFFECTS_MAX;
-
-	if (pidff->pool[PID_SIMULTANEOUS_MAX].value)
-		debug("max simultaneous effects is %d",
-		      pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
-
-	if (pidff->pool[PID_RAM_POOL_SIZE].value)
-		debug("device memory size is %d bytes",
-		      pidff->pool[PID_RAM_POOL_SIZE].value[0]);
-
-	if (pidff->pool[PID_DEVICE_MANAGED_POOL].value &&
-	    pidff->pool[PID_DEVICE_MANAGED_POOL].value[0] == 0) {
-		printk(KERN_NOTICE "hid-pidff: "
-		       "device does not support device managed pool\n");
-		goto fail;
-	}
-
-	error = input_ff_create(dev, max_effects);
-	if (error)
-		goto fail;
-
-	ff = dev->ff;
-	ff->private = pidff;
-	ff->upload = pidff_upload_effect;
-	ff->erase = pidff_erase_effect;
-	ff->set_gain = pidff_set_gain;
-	ff->set_autocenter = pidff_set_autocenter;
-	ff->playback = pidff_playback;
-
-	printk(KERN_INFO "Force feedback for USB HID PID devices by "
-	       "Anssi Hannula <anssi.hannula@gmail.com>\n");
-
-	return 0;
-
- fail:
-	kfree(pidff);
-	return error;
-}
diff --git a/drivers/usb/input/hid-plff.c b/drivers/usb/input/hid-plff.c
deleted file mode 100644
index 76d2e6e14db4..000000000000
--- a/drivers/usb/input/hid-plff.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  Force feedback support for PantherLord USB/PS2 2in1 Adapter devices
- *
- *  Copyright (c) 2007 Anssi Hannula <anssi.hannula@gmail.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-/* #define DEBUG */
-
-#define debug(format, arg...) pr_debug("hid-plff: " format "\n" , ## arg)
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/hid.h>
-#include "usbhid.h"
-
-struct plff_device {
-	struct hid_report *report;
-};
-
-static int hid_plff_play(struct input_dev *dev, void *data,
-			 struct ff_effect *effect)
-{
-	struct hid_device *hid = dev->private;
-	struct plff_device *plff = data;
-	int left, right;
-
-	left = effect->u.rumble.strong_magnitude;
-	right = effect->u.rumble.weak_magnitude;
-	debug("called with 0x%04x 0x%04x", left, right);
-
-	left = left * 0x7f / 0xffff;
-	right = right * 0x7f / 0xffff;
-
-	plff->report->field[0]->value[2] = left;
-	plff->report->field[0]->value[3] = right;
-	debug("running with 0x%02x 0x%02x", left, right);
-	usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
-
-	return 0;
-}
-
-int hid_plff_init(struct hid_device *hid)
-{
-	struct plff_device *plff;
-	struct hid_report *report;
-	struct hid_input *hidinput;
-	struct list_head *report_list =
-			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct list_head *report_ptr = report_list;
-	struct input_dev *dev;
-	int error;
-
-	/* The device contains 2 output reports (one for each
-	   HID_QUIRK_MULTI_INPUT device), both containing 1 field, which
-	   contains 4 ff00.0002 usages and 4 16bit absolute values.
-
-	   The 2 input reports also contain a field which contains
-	   8 ff00.0001 usages and 8 boolean values. Their meaning is
-	   currently unknown. */
-
-	if (list_empty(report_list)) {
-		printk(KERN_ERR "hid-plff: no output reports found\n");
-		return -ENODEV;
-	}
-
-	list_for_each_entry(hidinput, &hid->inputs, list) {
-
-		report_ptr = report_ptr->next;
-
-		if (report_ptr == report_list) {
-			printk(KERN_ERR "hid-plff: required output report is missing\n");
-			return -ENODEV;
-		}
-
-		report = list_entry(report_ptr, struct hid_report, list);
-		if (report->maxfield < 1) {
-			printk(KERN_ERR "hid-plff: no fields in the report\n");
-			return -ENODEV;
-		}
-
-		if (report->field[0]->report_count < 4) {
-			printk(KERN_ERR "hid-plff: not enough values in the field\n");
-			return -ENODEV;
-		}
-
-		plff = kzalloc(sizeof(struct plff_device), GFP_KERNEL);
-		if (!plff)
-			return -ENOMEM;
-
-		dev = hidinput->input;
-
-		set_bit(FF_RUMBLE, dev->ffbit);
-
-		error = input_ff_create_memless(dev, plff, hid_plff_play);
-		if (error) {
-			kfree(plff);
-			return error;
-		}
-
-		plff->report = report;
-		plff->report->field[0]->value[0] = 0x00;
-		plff->report->field[0]->value[1] = 0x00;
-		plff->report->field[0]->value[2] = 0x00;
-		plff->report->field[0]->value[3] = 0x00;
-		usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
-	}
-
-	printk(KERN_INFO "hid-plff: Force feedback for PantherLord USB/PS2 "
-	       "2in1 Adapters by Anssi Hannula <anssi.hannula@gmail.com>\n");
-
-	return 0;
-}
diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c
deleted file mode 100644
index ab67331620d0..000000000000
--- a/drivers/usb/input/hid-tmff.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Force feedback support for various HID compliant devices by ThrustMaster:
- *    ThrustMaster FireStorm Dual Power 2
- * and possibly others whose device ids haven't been added.
- *
- *  Modified to support ThrustMaster devices by Zinx Verituse
- *  on 2003-01-25 from the Logitech force feedback driver,
- *  which is by Johann Deneux.
- *
- *  Copyright (c) 2003 Zinx Verituse <zinx@epicsol.org>
- *  Copyright (c) 2002 Johann Deneux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/input.h>
-
-#undef DEBUG
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include "usbhid.h"
-
-/* Usages for thrustmaster devices I know about */
-#define THRUSTMASTER_USAGE_RUMBLE_LR	(HID_UP_GENDESK | 0xbb)
-
-
-struct tmff_device {
-	struct hid_report *report;
-	struct hid_field *rumble;
-};
-
-/* Changes values from 0 to 0xffff into values from minimum to maximum */
-static inline int hid_tmff_scale(unsigned int in, int minimum, int maximum)
-{
-	int ret;
-
-	ret = (in * (maximum - minimum) / 0xffff) + minimum;
-	if (ret < minimum)
-		return minimum;
-	if (ret > maximum)
-		return maximum;
-	return ret;
-}
-
-static int hid_tmff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
-{
-	struct hid_device *hid = dev->private;
-	struct tmff_device *tmff = data;
-	int left, right;	/* Rumbling */
-
-	left = hid_tmff_scale(effect->u.rumble.weak_magnitude,
-		tmff->rumble->logical_minimum, tmff->rumble->logical_maximum);
-	right = hid_tmff_scale(effect->u.rumble.strong_magnitude,
-		tmff->rumble->logical_minimum, tmff->rumble->logical_maximum);
-
-	tmff->rumble->value[0] = left;
-	tmff->rumble->value[1] = right;
-	dbg("(left,right)=(%08x, %08x)", left, right);
-	usbhid_submit_report(hid, tmff->report, USB_DIR_OUT);
-
-	return 0;
-}
-
-int hid_tmff_init(struct hid_device *hid)
-{
-	struct tmff_device *tmff;
-	struct list_head *pos;
-	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
-	struct input_dev *input_dev = hidinput->input;
-	int error;
-
-	tmff = kzalloc(sizeof(struct tmff_device), GFP_KERNEL);
-	if (!tmff)
-		return -ENOMEM;
-
-	/* Find the report to use */
-	__list_for_each(pos, &hid->report_enum[HID_OUTPUT_REPORT].report_list) {
-		struct hid_report *report = (struct hid_report *)pos;
-		int fieldnum;
-
-		for (fieldnum = 0; fieldnum < report->maxfield; ++fieldnum) {
-			struct hid_field *field = report->field[fieldnum];
-
-			if (field->maxusage <= 0)
-				continue;
-
-			switch (field->usage[0].hid) {
-				case THRUSTMASTER_USAGE_RUMBLE_LR:
-					if (field->report_count < 2) {
-						warn("ignoring THRUSTMASTER_USAGE_RUMBLE_LR with report_count < 2");
-						continue;
-					}
-
-					if (field->logical_maximum == field->logical_minimum) {
-						warn("ignoring THRUSTMASTER_USAGE_RUMBLE_LR with logical_maximum == logical_minimum");
-						continue;
-					}
-
-					if (tmff->report && tmff->report != report) {
-						warn("ignoring THRUSTMASTER_USAGE_RUMBLE_LR in other report");
-						continue;
-					}
-
-					if (tmff->rumble && tmff->rumble != field) {
-						warn("ignoring duplicate THRUSTMASTER_USAGE_RUMBLE_LR");
-						continue;
-					}
-
-					tmff->report = report;
-					tmff->rumble = field;
-
-					set_bit(FF_RUMBLE, input_dev->ffbit);
-					break;
-
-				default:
-					warn("ignoring unknown output usage %08x", field->usage[0].hid);
-					continue;
-			}
-		}
-	}
-
-	error = input_ff_create_memless(input_dev, tmff, hid_tmff_play);
-	if (error) {
-		kfree(tmff);
-		return error;
-	}
-
-	info("Force feedback for ThrustMaster rumble pad devices by Zinx Verituse <zinx@epicsol.org>");
-
-	return 0;
-}
-
diff --git a/drivers/usb/input/hid-zpff.c b/drivers/usb/input/hid-zpff.c
deleted file mode 100644
index 7bd8238ca212..000000000000
--- a/drivers/usb/input/hid-zpff.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  Force feedback support for Zeroplus based devices
- *
- *  Copyright (c) 2005, 2006 Anssi Hannula <anssi.hannula@gmail.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-/* #define DEBUG */
-
-#define debug(format, arg...) pr_debug("hid-zpff: " format "\n" , ## arg)
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/hid.h>
-#include "usbhid.h"
-
-struct zpff_device {
-	struct hid_report *report;
-};
-
-static int hid_zpff_play(struct input_dev *dev, void *data,
-			 struct ff_effect *effect)
-{
-	struct hid_device *hid = dev->private;
-	struct zpff_device *zpff = data;
-	int left, right;
-
-	/*
-	 * The following is specified the other way around in the Zeroplus
-	 * datasheet but the order below is correct for the XFX Executioner;
-	 * however it is possible that the XFX Executioner is an exception
-	 */
-
-	left = effect->u.rumble.strong_magnitude;
-	right = effect->u.rumble.weak_magnitude;
-	debug("called with 0x%04x 0x%04x", left, right);
-
-	left = left * 0x7f / 0xffff;
-	right = right * 0x7f / 0xffff;
-
-	zpff->report->field[2]->value[0] = left;
-	zpff->report->field[3]->value[0] = right;
-	debug("running with 0x%02x 0x%02x", left, right);
-	usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
-
-	return 0;
-}
-
-int hid_zpff_init(struct hid_device *hid)
-{
-	struct zpff_device *zpff;
-	struct hid_report *report;
-	struct hid_input *hidinput = list_entry(hid->inputs.next,
-						struct hid_input, list);
-	struct list_head *report_list =
-			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
-	struct input_dev *dev = hidinput->input;
-	int error;
-
-	if (list_empty(report_list)) {
-		printk(KERN_ERR "hid-zpff: no output report found\n");
-		return -ENODEV;
-	}
-
-	report = list_entry(report_list->next, struct hid_report, list);
-
-	if (report->maxfield < 4) {
-		printk(KERN_ERR "hid-zpff: not enough fields in report\n");
-		return -ENODEV;
-	}
-
-	zpff = kzalloc(sizeof(struct zpff_device), GFP_KERNEL);
-	if (!zpff)
-		return -ENOMEM;
-
-	set_bit(FF_RUMBLE, dev->ffbit);
-
-	error = input_ff_create_memless(dev, zpff, hid_zpff_play);
-	if (error) {
-		kfree(zpff);
-		return error;
-	}
-
-	zpff->report = report;
-	zpff->report->field[0]->value[0] = 0x00;
-	zpff->report->field[1]->value[0] = 0x02;
-	zpff->report->field[2]->value[0] = 0x00;
-	zpff->report->field[3]->value[0] = 0x00;
-	usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
-
-	printk(KERN_INFO "Force feedback for Zeroplus based devices by "
-	       "Anssi Hannula <anssi.hannula@gmail.com>\n");
-
-	return 0;
-}
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
deleted file mode 100644
index a8b3d66cd498..000000000000
--- a/drivers/usb/input/hiddev.c
+++ /dev/null
@@ -1,847 +0,0 @@
-/*
- *  Copyright (c) 2001 Paul Stewart
- *  Copyright (c) 2001 Vojtech Pavlik
- *
- *  HID char devices, giving access to raw HID device events.
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to Paul Stewart <stewart@wetlogic.net>
- */
-
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/hid.h>
-#include <linux/hiddev.h>
-#include "usbhid.h"
-
-#ifdef CONFIG_USB_DYNAMIC_MINORS
-#define HIDDEV_MINOR_BASE	0
-#define HIDDEV_MINORS		256
-#else
-#define HIDDEV_MINOR_BASE	96
-#define HIDDEV_MINORS		16
-#endif
-#define HIDDEV_BUFFER_SIZE	64
-
-struct hiddev {
-	int exist;
-	int open;
-	wait_queue_head_t wait;
-	struct hid_device *hid;
-	struct list_head list;
-};
-
-struct hiddev_list {
-	struct hiddev_usage_ref buffer[HIDDEV_BUFFER_SIZE];
-	int head;
-	int tail;
-	unsigned flags;
-	struct fasync_struct *fasync;
-	struct hiddev *hiddev;
-	struct list_head node;
-};
-
-static struct hiddev *hiddev_table[HIDDEV_MINORS];
-
-/*
- * Find a report, given the report's type and ID.  The ID can be specified
- * indirectly by REPORT_ID_FIRST (which returns the first report of the given
- * type) or by (REPORT_ID_NEXT | old_id), which returns the next report of the
- * given type which follows old_id.
- */
-static struct hid_report *
-hiddev_lookup_report(struct hid_device *hid, struct hiddev_report_info *rinfo)
-{
-	unsigned int flags = rinfo->report_id & ~HID_REPORT_ID_MASK;
-	unsigned int rid = rinfo->report_id & HID_REPORT_ID_MASK;
-	struct hid_report_enum *report_enum;
-	struct hid_report *report;
-	struct list_head *list;
-
-	if (rinfo->report_type < HID_REPORT_TYPE_MIN ||
-	    rinfo->report_type > HID_REPORT_TYPE_MAX)
-		return NULL;
-
-	report_enum = hid->report_enum +
-		(rinfo->report_type - HID_REPORT_TYPE_MIN);
-
-	switch (flags) {
-	case 0: /* Nothing to do -- report_id is already set correctly */
-		break;
-
-	case HID_REPORT_ID_FIRST:
-		if (list_empty(&report_enum->report_list))
-			return NULL;
-
-		list = report_enum->report_list.next;
-		report = list_entry(list, struct hid_report, list);
-		rinfo->report_id = report->id;
-		break;
-
-	case HID_REPORT_ID_NEXT:
-		report = report_enum->report_id_hash[rid];
-		if (!report)
-			return NULL;
-
-		list = report->list.next;
-		if (list == &report_enum->report_list)
-			return NULL;
-
-		report = list_entry(list, struct hid_report, list);
-		rinfo->report_id = report->id;
-		break;
-
-	default:
-		return NULL;
-	}
-
-	return report_enum->report_id_hash[rinfo->report_id];
-}
-
-/*
- * Perform an exhaustive search of the report table for a usage, given its
- * type and usage id.
- */
-static struct hid_field *
-hiddev_lookup_usage(struct hid_device *hid, struct hiddev_usage_ref *uref)
-{
-	int i, j;
-	struct hid_report *report;
-	struct hid_report_enum *report_enum;
-	struct hid_field *field;
-
-	if (uref->report_type < HID_REPORT_TYPE_MIN ||
-	    uref->report_type > HID_REPORT_TYPE_MAX)
-		return NULL;
-
-	report_enum = hid->report_enum +
-		(uref->report_type - HID_REPORT_TYPE_MIN);
-
-	list_for_each_entry(report, &report_enum->report_list, list) {
-		for (i = 0; i < report->maxfield; i++) {
-			field = report->field[i];
-			for (j = 0; j < field->maxusage; j++) {
-				if (field->usage[j].hid == uref->usage_code) {
-					uref->report_id = report->id;
-					uref->field_index = i;
-					uref->usage_index = j;
-					return field;
-				}
-			}
-		}
-	}
-
-	return NULL;
-}
-
-static void hiddev_send_event(struct hid_device *hid,
-			      struct hiddev_usage_ref *uref)
-{
-	struct hiddev *hiddev = hid->hiddev;
-	struct hiddev_list *list;
-
-	list_for_each_entry(list, &hiddev->list, node) {
-		if (uref->field_index != HID_FIELD_INDEX_NONE ||
-		    (list->flags & HIDDEV_FLAG_REPORT) != 0) {
-			list->buffer[list->head] = *uref;
-			list->head = (list->head + 1) &
-				(HIDDEV_BUFFER_SIZE - 1);
-			kill_fasync(&list->fasync, SIGIO, POLL_IN);
-		}
-	}
-
-	wake_up_interruptible(&hiddev->wait);
-}
-
-/*
- * This is where hid.c calls into hiddev to pass an event that occurred over
- * the interrupt pipe
- */
-void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
-		      struct hid_usage *usage, __s32 value)
-{
-	unsigned type = field->report_type;
-	struct hiddev_usage_ref uref;
-
-	uref.report_type =
-	  (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT :
-	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT :
-	   ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE : 0));
-	uref.report_id = field->report->id;
-	uref.field_index = field->index;
-	uref.usage_index = (usage - field->usage);
-	uref.usage_code = usage->hid;
-	uref.value = value;
-
-	hiddev_send_event(hid, &uref);
-}
-EXPORT_SYMBOL_GPL(hiddev_hid_event);
-
-void hiddev_report_event(struct hid_device *hid, struct hid_report *report)
-{
-	unsigned type = report->type;
-	struct hiddev_usage_ref uref;
-
-	memset(&uref, 0, sizeof(uref));
-	uref.report_type =
-	  (type == HID_INPUT_REPORT) ? HID_REPORT_TYPE_INPUT :
-	  ((type == HID_OUTPUT_REPORT) ? HID_REPORT_TYPE_OUTPUT :
-	   ((type == HID_FEATURE_REPORT) ? HID_REPORT_TYPE_FEATURE : 0));
-	uref.report_id = report->id;
-	uref.field_index = HID_FIELD_INDEX_NONE;
-
-	hiddev_send_event(hid, &uref);
-}
-
-/*
- * fasync file op
- */
-static int hiddev_fasync(int fd, struct file *file, int on)
-{
-	int retval;
-	struct hiddev_list *list = file->private_data;
-
-	retval = fasync_helper(fd, file, on, &list->fasync);
-
-	return retval < 0 ? retval : 0;
-}
-
-
-/*
- * release file op
- */
-static int hiddev_release(struct inode * inode, struct file * file)
-{
-	struct hiddev_list *list = file->private_data;
-
-	hiddev_fasync(-1, file, 0);
-	list_del(&list->node);
-
-	if (!--list->hiddev->open) {
-		if (list->hiddev->exist)
-			usbhid_close(list->hiddev->hid);
-		else
-			kfree(list->hiddev);
-	}
-
-	kfree(list);
-
-	return 0;
-}
-
-/*
- * open file op
- */
-static int hiddev_open(struct inode *inode, struct file *file)
-{
-	struct hiddev_list *list;
-
-	int i = iminor(inode) - HIDDEV_MINOR_BASE;
-
-	if (i >= HIDDEV_MINORS || !hiddev_table[i])
-		return -ENODEV;
-
-	if (!(list = kzalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
-		return -ENOMEM;
-
-	list->hiddev = hiddev_table[i];
-	list_add_tail(&list->node, &hiddev_table[i]->list);
-	file->private_data = list;
-
-	if (!list->hiddev->open++)
-		if (list->hiddev->exist)
-			usbhid_open(hiddev_table[i]->hid);
-
-	return 0;
-}
-
-/*
- * "write" file op
- */
-static ssize_t hiddev_write(struct file * file, const char __user * buffer, size_t count, loff_t *ppos)
-{
-	return -EINVAL;
-}
-
-/*
- * "read" file op
- */
-static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct hiddev_list *list = file->private_data;
-	int event_size;
-	int retval = 0;
-
-	event_size = ((list->flags & HIDDEV_FLAG_UREF) != 0) ?
-		sizeof(struct hiddev_usage_ref) : sizeof(struct hiddev_event);
-
-	if (count < event_size)
-		return 0;
-
-	while (retval == 0) {
-		if (list->head == list->tail) {
-			add_wait_queue(&list->hiddev->wait, &wait);
-			set_current_state(TASK_INTERRUPTIBLE);
-
-			while (list->head == list->tail) {
-				if (file->f_flags & O_NONBLOCK) {
-					retval = -EAGAIN;
-					break;
-				}
-				if (signal_pending(current)) {
-					retval = -ERESTARTSYS;
-					break;
-				}
-				if (!list->hiddev->exist) {
-					retval = -EIO;
-					break;
-				}
-
-				schedule();
-				set_current_state(TASK_INTERRUPTIBLE);
-			}
-
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&list->hiddev->wait, &wait);
-		}
-
-		if (retval)
-			return retval;
-
-
-		while (list->head != list->tail &&
-		       retval + event_size <= count) {
-			if ((list->flags & HIDDEV_FLAG_UREF) == 0) {
-				if (list->buffer[list->tail].field_index !=
-				    HID_FIELD_INDEX_NONE) {
-					struct hiddev_event event;
-					event.hid = list->buffer[list->tail].usage_code;
-					event.value = list->buffer[list->tail].value;
-					if (copy_to_user(buffer + retval, &event, sizeof(struct hiddev_event)))
-						return -EFAULT;
-					retval += sizeof(struct hiddev_event);
-				}
-			} else {
-				if (list->buffer[list->tail].field_index != HID_FIELD_INDEX_NONE ||
-				    (list->flags & HIDDEV_FLAG_REPORT) != 0) {
-					if (copy_to_user(buffer + retval, list->buffer + list->tail, sizeof(struct hiddev_usage_ref)))
-						return -EFAULT;
-					retval += sizeof(struct hiddev_usage_ref);
-				}
-			}
-			list->tail = (list->tail + 1) & (HIDDEV_BUFFER_SIZE - 1);
-		}
-
-	}
-
-	return retval;
-}
-
-/*
- * "poll" file op
- * No kernel lock - fine
- */
-static unsigned int hiddev_poll(struct file *file, poll_table *wait)
-{
-	struct hiddev_list *list = file->private_data;
-
-	poll_wait(file, &list->hiddev->wait, wait);
-	if (list->head != list->tail)
-		return POLLIN | POLLRDNORM;
-	if (!list->hiddev->exist)
-		return POLLERR | POLLHUP;
-	return 0;
-}
-
-/*
- * "ioctl" file op
- */
-static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct hiddev_list *list = file->private_data;
-	struct hiddev *hiddev = list->hiddev;
-	struct hid_device *hid = hiddev->hid;
-	struct usb_device *dev = hid_to_usb_dev(hid);
-	struct hiddev_collection_info cinfo;
-	struct hiddev_report_info rinfo;
-	struct hiddev_field_info finfo;
-	struct hiddev_usage_ref_multi *uref_multi = NULL;
-	struct hiddev_usage_ref *uref;
-	struct hiddev_devinfo dinfo;
-	struct hid_report *report;
-	struct hid_field *field;
-	struct usbhid_device *usbhid = hid->driver_data;
-	void __user *user_arg = (void __user *)arg;
-	int i;
-
-	if (!hiddev->exist)
-		return -EIO;
-
-	switch (cmd) {
-
-	case HIDIOCGVERSION:
-		return put_user(HID_VERSION, (int __user *)arg);
-
-	case HIDIOCAPPLICATION:
-		if (arg < 0 || arg >= hid->maxapplication)
-			return -EINVAL;
-
-		for (i = 0; i < hid->maxcollection; i++)
-			if (hid->collection[i].type ==
-			    HID_COLLECTION_APPLICATION && arg-- == 0)
-				break;
-
-		if (i == hid->maxcollection)
-			return -EINVAL;
-
-		return hid->collection[i].usage;
-
-	case HIDIOCGDEVINFO:
-		dinfo.bustype = BUS_USB;
-		dinfo.busnum = dev->bus->busnum;
-		dinfo.devnum = dev->devnum;
-		dinfo.ifnum = usbhid->ifnum;
-		dinfo.vendor = le16_to_cpu(dev->descriptor.idVendor);
-		dinfo.product = le16_to_cpu(dev->descriptor.idProduct);
-		dinfo.version = le16_to_cpu(dev->descriptor.bcdDevice);
-		dinfo.num_applications = hid->maxapplication;
-		if (copy_to_user(user_arg, &dinfo, sizeof(dinfo)))
-			return -EFAULT;
-
-		return 0;
-
-	case HIDIOCGFLAG:
-		if (put_user(list->flags, (int __user *)arg))
-			return -EFAULT;
-
-		return 0;
-
-	case HIDIOCSFLAG:
-		{
-			int newflags;
-			if (get_user(newflags, (int __user *)arg))
-				return -EFAULT;
-
-			if ((newflags & ~HIDDEV_FLAGS) != 0 ||
-			    ((newflags & HIDDEV_FLAG_REPORT) != 0 &&
-			     (newflags & HIDDEV_FLAG_UREF) == 0))
-				return -EINVAL;
-
-			list->flags = newflags;
-
-			return 0;
-		}
-
-	case HIDIOCGSTRING:
-		{
-			int idx, len;
-			char *buf;
-
-			if (get_user(idx, (int __user *)arg))
-				return -EFAULT;
-
-			if ((buf = kmalloc(HID_STRING_SIZE, GFP_KERNEL)) == NULL)
-				return -ENOMEM;
-
-			if ((len = usb_string(dev, idx, buf, HID_STRING_SIZE-1)) < 0) {
-				kfree(buf);
-				return -EINVAL;
-			}
-
-			if (copy_to_user(user_arg+sizeof(int), buf, len+1)) {
-				kfree(buf);
-				return -EFAULT;
-			}
-
-			kfree(buf);
-
-			return len;
-		}
-
-	case HIDIOCINITREPORT:
-		usbhid_init_reports(hid);
-
-		return 0;
-
-	case HIDIOCGREPORT:
-		if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
-			return -EFAULT;
-
-		if (rinfo.report_type == HID_REPORT_TYPE_OUTPUT)
-			return -EINVAL;
-
-		if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-			return -EINVAL;
-
-		usbhid_submit_report(hid, report, USB_DIR_IN);
-		usbhid_wait_io(hid);
-
-		return 0;
-
-	case HIDIOCSREPORT:
-		if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
-			return -EFAULT;
-
-		if (rinfo.report_type == HID_REPORT_TYPE_INPUT)
-			return -EINVAL;
-
-		if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-			return -EINVAL;
-
-		usbhid_submit_report(hid, report, USB_DIR_OUT);
-		usbhid_wait_io(hid);
-
-		return 0;
-
-	case HIDIOCGREPORTINFO:
-		if (copy_from_user(&rinfo, user_arg, sizeof(rinfo)))
-			return -EFAULT;
-
-		if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-			return -EINVAL;
-
-		rinfo.num_fields = report->maxfield;
-
-		if (copy_to_user(user_arg, &rinfo, sizeof(rinfo)))
-			return -EFAULT;
-
-		return 0;
-
-	case HIDIOCGFIELDINFO:
-		if (copy_from_user(&finfo, user_arg, sizeof(finfo)))
-			return -EFAULT;
-		rinfo.report_type = finfo.report_type;
-		rinfo.report_id = finfo.report_id;
-		if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-			return -EINVAL;
-
-		if (finfo.field_index >= report->maxfield)
-			return -EINVAL;
-
-		field = report->field[finfo.field_index];
-		memset(&finfo, 0, sizeof(finfo));
-		finfo.report_type = rinfo.report_type;
-		finfo.report_id = rinfo.report_id;
-		finfo.field_index = field->report_count - 1;
-		finfo.maxusage = field->maxusage;
-		finfo.flags = field->flags;
-		finfo.physical = field->physical;
-		finfo.logical = field->logical;
-		finfo.application = field->application;
-		finfo.logical_minimum = field->logical_minimum;
-		finfo.logical_maximum = field->logical_maximum;
-		finfo.physical_minimum = field->physical_minimum;
-		finfo.physical_maximum = field->physical_maximum;
-		finfo.unit_exponent = field->unit_exponent;
-		finfo.unit = field->unit;
-
-		if (copy_to_user(user_arg, &finfo, sizeof(finfo)))
-			return -EFAULT;
-
-		return 0;
-
-	case HIDIOCGUCODE:
-		uref_multi = kmalloc(sizeof(struct hiddev_usage_ref_multi), GFP_KERNEL);
-		if (!uref_multi)
-			return -ENOMEM;
-		uref = &uref_multi->uref;
-		if (copy_from_user(uref, user_arg, sizeof(*uref)))
-			goto fault;
-
-		rinfo.report_type = uref->report_type;
-		rinfo.report_id = uref->report_id;
-		if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-			goto inval;
-
-		if (uref->field_index >= report->maxfield)
-			goto inval;
-
-		field = report->field[uref->field_index];
-		if (uref->usage_index >= field->maxusage)
-			goto inval;
-
-		uref->usage_code = field->usage[uref->usage_index].hid;
-
-		if (copy_to_user(user_arg, uref, sizeof(*uref)))
-			goto fault;
-
-		kfree(uref_multi);
-		return 0;
-
-	case HIDIOCGUSAGE:
-	case HIDIOCSUSAGE:
-	case HIDIOCGUSAGES:
-	case HIDIOCSUSAGES:
-	case HIDIOCGCOLLECTIONINDEX:
-		uref_multi = kmalloc(sizeof(struct hiddev_usage_ref_multi), GFP_KERNEL);
-		if (!uref_multi)
-			return -ENOMEM;
-		uref = &uref_multi->uref;
-		if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
-			if (copy_from_user(uref_multi, user_arg,
-					   sizeof(*uref_multi)))
-				goto fault;
-		} else {
-			if (copy_from_user(uref, user_arg, sizeof(*uref)))
-				goto fault;
-		}
-
-		if (cmd != HIDIOCGUSAGE &&
-		    cmd != HIDIOCGUSAGES &&
-		    uref->report_type == HID_REPORT_TYPE_INPUT)
-			goto inval;
-
-		if (uref->report_id == HID_REPORT_ID_UNKNOWN) {
-			field = hiddev_lookup_usage(hid, uref);
-			if (field == NULL)
-				goto inval;
-		} else {
-			rinfo.report_type = uref->report_type;
-			rinfo.report_id = uref->report_id;
-			if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
-				goto inval;
-
-			if (uref->field_index >= report->maxfield)
-				goto inval;
-
-			field = report->field[uref->field_index];
-
-			if (cmd == HIDIOCGCOLLECTIONINDEX) {
-				if (uref->usage_index >= field->maxusage)
-					goto inval;
-			} else if (uref->usage_index >= field->report_count)
-				goto inval;
-
-			else if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
-				 (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
-				  uref->usage_index + uref_multi->num_values > field->report_count))
-				goto inval;
-			}
-
-		switch (cmd) {
-			case HIDIOCGUSAGE:
-				uref->value = field->value[uref->usage_index];
-				if (copy_to_user(user_arg, uref, sizeof(*uref)))
-					goto fault;
-				goto goodreturn;
-
-			case HIDIOCSUSAGE:
-				field->value[uref->usage_index] = uref->value;
-				goto goodreturn;
-
-			case HIDIOCGCOLLECTIONINDEX:
-				kfree(uref_multi);
-				return field->usage[uref->usage_index].collection_index;
-			case HIDIOCGUSAGES:
-				for (i = 0; i < uref_multi->num_values; i++)
-					uref_multi->values[i] =
-					    field->value[uref->usage_index + i];
-				if (copy_to_user(user_arg, uref_multi,
-						 sizeof(*uref_multi)))
-					goto fault;
-				goto goodreturn;
-			case HIDIOCSUSAGES:
-				for (i = 0; i < uref_multi->num_values; i++)
-					field->value[uref->usage_index + i] =
-					    uref_multi->values[i];
-				goto goodreturn;
-		}
-
-goodreturn:
-		kfree(uref_multi);
-		return 0;
-fault:
-		kfree(uref_multi);
-		return -EFAULT;
-inval:
-		kfree(uref_multi);
-		return -EINVAL;
-
-	case HIDIOCGCOLLECTIONINFO:
-		if (copy_from_user(&cinfo, user_arg, sizeof(cinfo)))
-			return -EFAULT;
-
-		if (cinfo.index >= hid->maxcollection)
-			return -EINVAL;
-
-		cinfo.type = hid->collection[cinfo.index].type;
-		cinfo.usage = hid->collection[cinfo.index].usage;
-		cinfo.level = hid->collection[cinfo.index].level;
-
-		if (copy_to_user(user_arg, &cinfo, sizeof(cinfo)))
-			return -EFAULT;
-		return 0;
-
-	default:
-
-		if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
-			return -EINVAL;
-
-		if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGNAME(0))) {
-			int len;
-			if (!hid->name)
-				return 0;
-			len = strlen(hid->name) + 1;
-			if (len > _IOC_SIZE(cmd))
-				 len = _IOC_SIZE(cmd);
-			return copy_to_user(user_arg, hid->name, len) ?
-				-EFAULT : len;
-		}
-
-		if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGPHYS(0))) {
-			int len;
-			if (!hid->phys)
-				return 0;
-			len = strlen(hid->phys) + 1;
-			if (len > _IOC_SIZE(cmd))
-				len = _IOC_SIZE(cmd);
-			return copy_to_user(user_arg, hid->phys, len) ?
-				-EFAULT : len;
-		}
-	}
-	return -EINVAL;
-}
-
-static const struct file_operations hiddev_fops = {
-	.owner =	THIS_MODULE,
-	.read =		hiddev_read,
-	.write =	hiddev_write,
-	.poll =		hiddev_poll,
-	.open =		hiddev_open,
-	.release =	hiddev_release,
-	.ioctl =	hiddev_ioctl,
-	.fasync =	hiddev_fasync,
-};
-
-static struct usb_class_driver hiddev_class = {
-	.name =		"hiddev%d",
-	.fops =		&hiddev_fops,
-	.minor_base =	HIDDEV_MINOR_BASE,
-};
-
-/*
- * This is where hid.c calls us to connect a hid device to the hiddev driver
- */
-int hiddev_connect(struct hid_device *hid)
-{
-	struct hiddev *hiddev;
-	struct usbhid_device *usbhid = hid->driver_data;
-	int i;
-	int retval;
-
-	for (i = 0; i < hid->maxcollection; i++)
-		if (hid->collection[i].type ==
-		    HID_COLLECTION_APPLICATION &&
-		    !IS_INPUT_APPLICATION(hid->collection[i].usage))
-			break;
-
-	if (i == hid->maxcollection && (hid->quirks & HID_QUIRK_HIDDEV) == 0)
-		return -1;
-
-	if (!(hiddev = kzalloc(sizeof(struct hiddev), GFP_KERNEL)))
-		return -1;
-
-	retval = usb_register_dev(usbhid->intf, &hiddev_class);
-	if (retval) {
-		err("Not able to get a minor for this device.");
-		kfree(hiddev);
-		return -1;
-	}
-
-	init_waitqueue_head(&hiddev->wait);
-	INIT_LIST_HEAD(&hiddev->list);
-	hiddev->hid = hid;
-	hiddev->exist = 1;
-
-	hid->minor = usbhid->intf->minor;
-	hid->hiddev = hiddev;
-
-	hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
-
-	return 0;
-}
-
-/*
- * This is where hid.c calls us to disconnect a hiddev device from the
- * corresponding hid device (usually because the usb device has disconnected)
- */
-static struct usb_class_driver hiddev_class;
-void hiddev_disconnect(struct hid_device *hid)
-{
-	struct hiddev *hiddev = hid->hiddev;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	hiddev->exist = 0;
-
-	hiddev_table[hiddev->hid->minor - HIDDEV_MINOR_BASE] = NULL;
-	usb_deregister_dev(usbhid->intf, &hiddev_class);
-
-	if (hiddev->open) {
-		usbhid_close(hiddev->hid);
-		wake_up_interruptible(&hiddev->wait);
-	} else {
-		kfree(hiddev);
-	}
-}
-
-/* Currently this driver is a USB driver.  It's not a conventional one in
- * the sense that it doesn't probe at the USB level.  Instead it waits to
- * be connected by HID through the hiddev_connect / hiddev_disconnect
- * routines.  The reason to register as a USB device is to gain part of the
- * minor number space from the USB major.
- *
- * In theory, should the HID code be generalized to more than one physical
- * medium (say, IEEE 1384), this driver will probably need to register its
- * own major number, and in doing so, no longer need to register with USB.
- * At that point the probe routine and hiddev_driver struct below will no
- * longer be useful.
- */
-
-
-/* We never attach in this manner, and rely on HID to connect us.  This
- * is why there is no disconnect routine defined in the usb_driver either.
- */
-static int hiddev_usbd_probe(struct usb_interface *intf,
-			     const struct usb_device_id *hiddev_info)
-{
-	return -ENODEV;
-}
-
-
-static /* const */ struct usb_driver hiddev_driver = {
-	.name =		"hiddev",
-	.probe =	hiddev_usbd_probe,
-};
-
-int __init hiddev_init(void)
-{
-	return usb_register(&hiddev_driver);
-}
-
-void hiddev_exit(void)
-{
-	usb_deregister(&hiddev_driver);
-}
diff --git a/drivers/usb/input/usbhid.h b/drivers/usb/input/usbhid.h
deleted file mode 100644
index 0023f96d4294..000000000000
--- a/drivers/usb/input/usbhid.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef __USBHID_H
-#define __USBHID_H
-
-/*
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2001 Vojtech Pavlik
- *  Copyright (c) 2006 Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/input.h>
-
-/*  API provided by hid-core.c for USB HID drivers */
-int usbhid_wait_io(struct hid_device* hid);
-void usbhid_close(struct hid_device *hid);
-int usbhid_open(struct hid_device *hid);
-void usbhid_init_reports(struct hid_device *hid);
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir);
-
-/*
- * USB-specific HID struct, to be pointed to
- * from struct hid_device->driver_data
- */
-
-struct usbhid_device {
-	struct hid_device *hid;						/* pointer to corresponding HID dev */
-
-	struct usb_interface *intf;                                     /* USB interface */
-	int ifnum;                                                      /* USB interface number */
-
-	unsigned int bufsize;                                           /* URB buffer size */
-
-	struct urb *urbin;                                              /* Input URB */
-	char *inbuf;                                                    /* Input buffer */
-	dma_addr_t inbuf_dma;                                           /* Input buffer dma */
-	spinlock_t inlock;                                              /* Input fifo spinlock */
-
-	struct urb *urbctrl;                                            /* Control URB */
-	struct usb_ctrlrequest *cr;                                     /* Control request struct */
-	dma_addr_t cr_dma;                                              /* Control request struct dma */
-	struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE];  		/* Control fifo */
-	unsigned char ctrlhead, ctrltail;                               /* Control fifo head & tail */
-	char *ctrlbuf;                                                  /* Control buffer */
-	dma_addr_t ctrlbuf_dma;                                         /* Control buffer dma */
-	spinlock_t ctrllock;                                            /* Control fifo spinlock */
-
-	struct urb *urbout;                                             /* Output URB */
-	struct hid_report *out[HID_CONTROL_FIFO_SIZE];                  /* Output pipe fifo */
-	unsigned char outhead, outtail;                                 /* Output pipe fifo head & tail */
-	char *outbuf;                                                   /* Output buffer */
-	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
-	spinlock_t outlock;                                             /* Output fifo spinlock */
-
-	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
-	struct timer_list io_retry;                                     /* Retry timer */
-	unsigned long stop_retry;                                       /* Time to give up, in jiffies */
-	unsigned int retry_delay;                                       /* Delay length in ms */
-	struct work_struct reset_work;                                  /* Task context for resets */
-
-};
-
-#define	hid_to_usb_dev(hid_dev) \
-	container_of(hid_dev->dev->parent, struct usb_device, dev)
-
-#endif
-
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
deleted file mode 100644
index 3749f4a235f9..000000000000
--- a/drivers/usb/input/usbkbd.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
- *
- *  Copyright (c) 1999-2001 Vojtech Pavlik
- *
- *  USB HIDBP Keyboard support
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <linux/hid.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION ""
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
-#define DRIVER_DESC "USB HID Boot Protocol keyboard driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-static unsigned char usb_kbd_keycode[256] = {
-	  0,  0,  0,  0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
-	 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44,  2,  3,
-	  4,  5,  6,  7,  8,  9, 10, 11, 28,  1, 14, 15, 57, 12, 13, 26,
-	 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
-	 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
-	105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
-	 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
-	191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
-	115,114,  0,  0,  0,121,  0, 89, 93,124, 92, 94, 95,  0,  0,  0,
-	122,123, 90, 91, 85,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
-	 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
-	150,158,159,128,136,177,178,176,142,152,173,140
-};
-
-struct usb_kbd {
-	struct input_dev *dev;
-	struct usb_device *usbdev;
-	unsigned char old[8];
-	struct urb *irq, *led;
-	unsigned char newleds;
-	char name[128];
-	char phys[64];
-
-	unsigned char *new;
-	struct usb_ctrlrequest *cr;
-	unsigned char *leds;
-	dma_addr_t cr_dma;
-	dma_addr_t new_dma;
-	dma_addr_t leds_dma;
-};
-
-static void usb_kbd_irq(struct urb *urb)
-{
-	struct usb_kbd *kbd = urb->context;
-	int i;
-
-	switch (urb->status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		goto resubmit;
-	}
-
-	for (i = 0; i < 8; i++)
-		input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
-
-	for (i = 2; i < 8; i++) {
-
-		if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) {
-			if (usb_kbd_keycode[kbd->old[i]])
-				input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
-			else
-				info("Unknown key (scancode %#x) released.", kbd->old[i]);
-		}
-
-		if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
-			if (usb_kbd_keycode[kbd->new[i]])
-				input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
-			else
-				info("Unknown key (scancode %#x) pressed.", kbd->new[i]);
-		}
-	}
-
-	input_sync(kbd->dev);
-
-	memcpy(kbd->old, kbd->new, 8);
-
-resubmit:
-	i = usb_submit_urb (urb, GFP_ATOMIC);
-	if (i)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
-				kbd->usbdev->bus->bus_name,
-				kbd->usbdev->devpath, i);
-}
-
-static int usb_kbd_event(struct input_dev *dev, unsigned int type,
-			 unsigned int code, int value)
-{
-	struct usb_kbd *kbd = dev->private;
-
-	if (type != EV_LED)
-		return -1;
-
-
-	kbd->newleds = (!!test_bit(LED_KANA,    dev->led) << 3) | (!!test_bit(LED_COMPOSE, dev->led) << 3) |
-		       (!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_CAPSL,   dev->led) << 1) |
-		       (!!test_bit(LED_NUML,    dev->led));
-
-	if (kbd->led->status == -EINPROGRESS)
-		return 0;
-
-	if (*(kbd->leds) == kbd->newleds)
-		return 0;
-
-	*(kbd->leds) = kbd->newleds;
-	kbd->led->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
-		err("usb_submit_urb(leds) failed");
-
-	return 0;
-}
-
-static void usb_kbd_led(struct urb *urb)
-{
-	struct usb_kbd *kbd = urb->context;
-
-	if (urb->status)
-		warn("led urb status %d received", urb->status);
-
-	if (*(kbd->leds) == kbd->newleds)
-		return;
-
-	*(kbd->leds) = kbd->newleds;
-	kbd->led->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
-		err("usb_submit_urb(leds) failed");
-}
-
-static int usb_kbd_open(struct input_dev *dev)
-{
-	struct usb_kbd *kbd = dev->private;
-
-	kbd->irq->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->irq, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void usb_kbd_close(struct input_dev *dev)
-{
-	struct usb_kbd *kbd = dev->private;
-
-	usb_kill_urb(kbd->irq);
-}
-
-static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
-{
-	if (!(kbd->irq = usb_alloc_urb(0, GFP_KERNEL)))
-		return -1;
-	if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
-		return -1;
-	if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
-		return -1;
-	if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
-		return -1;
-	if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
-		return -1;
-
-	return 0;
-}
-
-static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
-{
-	usb_free_urb(kbd->irq);
-	usb_free_urb(kbd->led);
-	if (kbd->new)
-		usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
-	if (kbd->cr)
-		usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
-	if (kbd->leds)
-		usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
-}
-
-static int usb_kbd_probe(struct usb_interface *iface,
-			 const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(iface);
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_kbd *kbd;
-	struct input_dev *input_dev;
-	int i, pipe, maxp;
-
-	interface = iface->cur_altsetting;
-
-	if (interface->desc.bNumEndpoints != 1)
-		return -ENODEV;
-
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(endpoint))
-		return -ENODEV;
-
-	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-	kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!kbd || !input_dev)
-		goto fail1;
-
-	if (usb_kbd_alloc_mem(dev, kbd))
-		goto fail2;
-
-	kbd->usbdev = dev;
-	kbd->dev = input_dev;
-
-	if (dev->manufacturer)
-		strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
-
-	if (dev->product) {
-		if (dev->manufacturer)
-			strlcat(kbd->name, " ", sizeof(kbd->name));
-		strlcat(kbd->name, dev->product, sizeof(kbd->name));
-	}
-
-	if (!strlen(kbd->name))
-		snprintf(kbd->name, sizeof(kbd->name),
-			 "USB HIDBP Keyboard %04x:%04x",
-			 le16_to_cpu(dev->descriptor.idVendor),
-			 le16_to_cpu(dev->descriptor.idProduct));
-
-	usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
-	strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
-
-	input_dev->name = kbd->name;
-	input_dev->phys = kbd->phys;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->cdev.dev = &iface->dev;
-	input_dev->private = kbd;
-
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
-	input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
-
-	for (i = 0; i < 255; i++)
-		set_bit(usb_kbd_keycode[i], input_dev->keybit);
-	clear_bit(0, input_dev->keybit);
-
-	input_dev->event = usb_kbd_event;
-	input_dev->open = usb_kbd_open;
-	input_dev->close = usb_kbd_close;
-
-	usb_fill_int_urb(kbd->irq, dev, pipe,
-			 kbd->new, (maxp > 8 ? 8 : maxp),
-			 usb_kbd_irq, kbd, endpoint->bInterval);
-	kbd->irq->transfer_dma = kbd->new_dma;
-	kbd->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	kbd->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
-	kbd->cr->bRequest = 0x09;
-	kbd->cr->wValue = cpu_to_le16(0x200);
-	kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
-	kbd->cr->wLength = cpu_to_le16(1);
-
-	usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
-			     (void *) kbd->cr, kbd->leds, 1,
-			     usb_kbd_led, kbd);
-	kbd->led->setup_dma = kbd->cr_dma;
-	kbd->led->transfer_dma = kbd->leds_dma;
-	kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
-
-	input_register_device(kbd->dev);
-
-	usb_set_intfdata(iface, kbd);
-	return 0;
-
-fail2:	usb_kbd_free_mem(dev, kbd);
-fail1:	input_free_device(input_dev);
-	kfree(kbd);
-	return -ENOMEM;
-}
-
-static void usb_kbd_disconnect(struct usb_interface *intf)
-{
-	struct usb_kbd *kbd = usb_get_intfdata (intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (kbd) {
-		usb_kill_urb(kbd->irq);
-		input_unregister_device(kbd->dev);
-		usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
-		kfree(kbd);
-	}
-}
-
-static struct usb_device_id usb_kbd_id_table [] = {
-	{ USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
-		USB_INTERFACE_PROTOCOL_KEYBOARD) },
-	{ }						/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_kbd_id_table);
-
-static struct usb_driver usb_kbd_driver = {
-	.name =		"usbkbd",
-	.probe =	usb_kbd_probe,
-	.disconnect =	usb_kbd_disconnect,
-	.id_table =	usb_kbd_id_table,
-};
-
-static int __init usb_kbd_init(void)
-{
-	int result = usb_register(&usb_kbd_driver);
-	if (result == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
-	return result;
-}
-
-static void __exit usb_kbd_exit(void)
-{
-	usb_deregister(&usb_kbd_driver);
-}
-
-module_init(usb_kbd_init);
-module_exit(usb_kbd_exit);
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
deleted file mode 100644
index 692fd6087779..000000000000
--- a/drivers/usb/input/usbmouse.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * $Id: usbmouse.c,v 1.15 2001/12/27 10:37:41 vojtech Exp $
- *
- *  Copyright (c) 1999-2001 Vojtech Pavlik
- *
- *  USB HIDBP Mouse support
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <linux/hid.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.6"
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
-#define DRIVER_DESC "USB HID Boot Protocol mouse driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-struct usb_mouse {
-	char name[128];
-	char phys[64];
-	struct usb_device *usbdev;
-	struct input_dev *dev;
-	struct urb *irq;
-
-	signed char *data;
-	dma_addr_t data_dma;
-};
-
-static void usb_mouse_irq(struct urb *urb)
-{
-	struct usb_mouse *mouse = urb->context;
-	signed char *data = mouse->data;
-	struct input_dev *dev = mouse->dev;
-	int status;
-
-	switch (urb->status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		goto resubmit;
-	}
-
-	input_report_key(dev, BTN_LEFT,   data[0] & 0x01);
-	input_report_key(dev, BTN_RIGHT,  data[0] & 0x02);
-	input_report_key(dev, BTN_MIDDLE, data[0] & 0x04);
-	input_report_key(dev, BTN_SIDE,   data[0] & 0x08);
-	input_report_key(dev, BTN_EXTRA,  data[0] & 0x10);
-
-	input_report_rel(dev, REL_X,     data[1]);
-	input_report_rel(dev, REL_Y,     data[2]);
-	input_report_rel(dev, REL_WHEEL, data[3]);
-
-	input_sync(dev);
-resubmit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
-				mouse->usbdev->bus->bus_name,
-				mouse->usbdev->devpath, status);
-}
-
-static int usb_mouse_open(struct input_dev *dev)
-{
-	struct usb_mouse *mouse = dev->private;
-
-	mouse->irq->dev = mouse->usbdev;
-	if (usb_submit_urb(mouse->irq, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void usb_mouse_close(struct input_dev *dev)
-{
-	struct usb_mouse *mouse = dev->private;
-
-	usb_kill_urb(mouse->irq);
-}
-
-static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_mouse *mouse;
-	struct input_dev *input_dev;
-	int pipe, maxp;
-
-	interface = intf->cur_altsetting;
-
-	if (interface->desc.bNumEndpoints != 1)
-		return -ENODEV;
-
-	endpoint = &interface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(endpoint))
-		return -ENODEV;
-
-	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-	mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!mouse || !input_dev)
-		goto fail1;
-
-	mouse->data = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &mouse->data_dma);
-	if (!mouse->data)
-		goto fail1;
-
-	mouse->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!mouse->irq)
-		goto fail2;
-
-	mouse->usbdev = dev;
-	mouse->dev = input_dev;
-
-	if (dev->manufacturer)
-		strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name));
-
-	if (dev->product) {
-		if (dev->manufacturer)
-			strlcat(mouse->name, " ", sizeof(mouse->name));
-		strlcat(mouse->name, dev->product, sizeof(mouse->name));
-	}
-
-	if (!strlen(mouse->name))
-		snprintf(mouse->name, sizeof(mouse->name),
-			 "USB HIDBP Mouse %04x:%04x",
-			 le16_to_cpu(dev->descriptor.idVendor),
-			 le16_to_cpu(dev->descriptor.idProduct));
-
-	usb_make_path(dev, mouse->phys, sizeof(mouse->phys));
-	strlcat(mouse->phys, "/input0", sizeof(mouse->phys));
-
-	input_dev->name = mouse->name;
-	input_dev->phys = mouse->phys;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->cdev.dev = &intf->dev;
-
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-	input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-	input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
-	input_dev->relbit[0] |= BIT(REL_WHEEL);
-
-	input_dev->private = mouse;
-	input_dev->open = usb_mouse_open;
-	input_dev->close = usb_mouse_close;
-
-	usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data,
-			 (maxp > 8 ? 8 : maxp),
-			 usb_mouse_irq, mouse, endpoint->bInterval);
-	mouse->irq->transfer_dma = mouse->data_dma;
-	mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	input_register_device(mouse->dev);
-
-	usb_set_intfdata(intf, mouse);
-	return 0;
-
-fail2:	usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
-fail1:	input_free_device(input_dev);
-	kfree(mouse);
-	return -ENOMEM;
-}
-
-static void usb_mouse_disconnect(struct usb_interface *intf)
-{
-	struct usb_mouse *mouse = usb_get_intfdata (intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (mouse) {
-		usb_kill_urb(mouse->irq);
-		input_unregister_device(mouse->dev);
-		usb_free_urb(mouse->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma);
-		kfree(mouse);
-	}
-}
-
-static struct usb_device_id usb_mouse_id_table [] = {
-	{ USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
-		USB_INTERFACE_PROTOCOL_MOUSE) },
-	{ }	/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_mouse_id_table);
-
-static struct usb_driver usb_mouse_driver = {
-	.name		= "usbmouse",
-	.probe		= usb_mouse_probe,
-	.disconnect	= usb_mouse_disconnect,
-	.id_table	= usb_mouse_id_table,
-};
-
-static int __init usb_mouse_init(void)
-{
-	int retval = usb_register(&usb_mouse_driver);
-	if (retval == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
-	return retval;
-}
-
-static void __exit usb_mouse_exit(void)
-{
-	usb_deregister(&usb_mouse_driver);
-}
-
-module_init(usb_mouse_init);
-module_exit(usb_mouse_exit);