Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
  tty: split the lock up a bit further
  tty: Move the leader test in disassociate
  tty: Push the bkl down a bit in the hangup code
  tty: Push the lock down further into the ldisc code
  tty: push the BKL down into the handlers a bit
  tty: moxa: split open lock
  tty: moxa: Kill the use of lock_kernel
  tty: moxa: Fix modem op locking
  tty: moxa: Kill off the throttle method
  tty: moxa: Locking clean up
  tty: moxa: rework the locking a bit
  tty: moxa: Use more tty_port ops
  tty: isicom: fix deadlock on shutdown
  tty: mxser: Use the new locking rules to fix setserial properly
  tty: mxser: use the tty_port_open method
  tty: isicom: sort out the board init logic
  tty: isicom: switch to the new tty_port_open helper
  tty: tty_port: Add a kref object to the tty port
  tty: istallion: tty port open/close methods
  tty: stallion: Convert to the tty_port_open/close methods
  ...

2 files changed, 32 insertions, 58 deletions

diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 80f59b6350cb..4cdb975caa89 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -501,12 +501,13 @@ static int opticon_resume(struct usb_interface *intf)
 	struct usb_serial_port *port = serial->port[0];
 	int result;
 
-	mutex_lock(&port->mutex);
-	if (port->port.count)
+	mutex_lock(&port->port.mutex);
+	/* This is protected by the port mutex against close/open */
+	if (test_bit(ASYNCB_INITIALIZED, &port->port.flags))
 		result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO);
 	else
 		result = 0;
-	mutex_unlock(&port->mutex);
+	mutex_unlock(&port->port.mutex);
 	return result;
 }
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index bd3fa7ff15b1..4543f359be75 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -247,96 +247,66 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 	return retval;
 }
 
-static int serial_open(struct tty_struct *tty, struct file *filp)
+static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
 {
-	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial_port *port =
+		container_of(tport, struct usb_serial_port, port);
 	struct usb_serial *serial = port->serial;
 	int retval;
 
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&port->port.lock);
-	if (!tty_hung_up_p(filp))
-		++port->port.count;
-	spin_unlock_irq(&port->port.lock);
-	tty_port_tty_set(&port->port, tty);
+	mutex_lock(&serial->disc_mutex);
+	if (serial->disconnected)
+		retval = -ENODEV;
+	else
+		retval = port->serial->type->open(tty, port);
+	mutex_unlock(&serial->disc_mutex);
+	return retval;
+}
 
-	/* Do the device-specific open only if the hardware isn't
-	 * already initialized.
-	 */
-	if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
-		if (mutex_lock_interruptible(&port->mutex))
-			return -ERESTARTSYS;
-		mutex_lock(&serial->disc_mutex);
-		if (serial->disconnected)
-			retval = -ENODEV;
-		else
-			retval = port->serial->type->open(tty, port);
-		mutex_unlock(&serial->disc_mutex);
-		mutex_unlock(&port->mutex);
-		if (retval)
-			return retval;
-		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
-	}
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
 
-	/* Now do the correct tty layer semantics */
-	retval = tty_port_block_til_ready(&port->port, tty, filp);
-	return retval;
+	dbg("%s - port %d", __func__, port->number);
+	return tty_port_open(&port->port, tty, filp);
 }
 
 /**
  * serial_down - shut down hardware
- * @port: port to shut down
+ * @tport: tty port to shut down
  *
  * Shut down a USB serial port unless it is the console.  We never
- * shut down the console hardware as it will always be in use.
+ * shut down the console hardware as it will always be in use. Serialized
+ * against activate by the tport mutex and kept to matching open/close pairs
+ * of calls by the ASYNCB_INITIALIZED flag.
  */
-static void serial_down(struct usb_serial_port *port)
+static void serial_down(struct tty_port *tport)
 {
+	struct usb_serial_port *port =
+		container_of(tport, struct usb_serial_port, port);
 	struct usb_serial_driver *drv = port->serial->type;
-
 	/*
 	 * The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
 	if (port->console)
 		return;
-
-	/* Don't call the close method if the hardware hasn't been
-	 * initialized.
-	 */
-	if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
-		return;
-
-	mutex_lock(&port->mutex);
 	if (drv->close)
 		drv->close(port);
-	mutex_unlock(&port->mutex);
 }
 
 static void serial_hangup(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-
 	dbg("%s - port %d", __func__, port->number);
-
-	serial_down(port);
 	tty_port_hangup(&port->port);
 }
 
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
-
 	dbg("%s - port %d", __func__, port->number);
-
-	if (tty_hung_up_p(filp))
-		return;
-	if (tty_port_close_start(&port->port, tty, filp) == 0)
-		return;
-	serial_down(port);
-	tty_port_close_end(&port->port, tty);
-	tty_port_tty_set(&port->port, NULL);
+	tty_port_close(&port->port, tty, filp);
 }
 
 /**
@@ -725,6 +695,8 @@ static void serial_dtr_rts(struct tty_port *port, int on)
 static const struct tty_port_operations serial_port_ops = {
 	.carrier_raised = serial_carrier_raised,
 	.dtr_rts = serial_dtr_rts,
+	.activate = serial_activate,
+	.shutdown = serial_down,
 };
 
 int usb_serial_probe(struct usb_interface *interface,
@@ -923,7 +895,8 @@ int usb_serial_probe(struct usb_interface *interface,
 		port->port.ops = &serial_port_ops;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
-		mutex_init(&port->mutex);
+		/* Keep this for private driver use for the moment but
+		   should probably go away */
 		INIT_WORK(&port->work, usb_serial_port_work);
 		serial->port[i] = port;
 		port->dev.parent = &interface->dev;