Merge remote branch 'origin/master' into drm-intel-next

This resolves the conflict in the EDP code, which has been rather
popular to hack on recently.

Conflicts:
	drivers/gpu/drm/i915/intel_dp.c

18 files changed, 86 insertions, 26 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 61d75507d5d0..162c95a088ed 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbbe97fa..70cccc75a362 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
 			if (hub_is_wusb(hub))
 				udev->speed = USB_SPEED_WIRELESS;
+			else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+				udev->speed = USB_SPEED_SUPER;
 			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03df8b17..db99c084df92 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Artisman Watchdog Dongle */
+	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 
+	/* Broadcom BCM92035DGROM BT dongle */
+	{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b0d8921eae..980762453a9c 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2561,7 +2561,7 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
 		udc_disable(udc);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()   do {} while (0)
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e724a051bfdd..ea2b3c7ebee5 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 	else
 		dev->ep0state = EP0_OUT_DATA_PHASE;
 
+	if (!dev->driver)
+		return;
+
+	/* deliver the request to the gadget driver */
 	ret = dev->driver->setup(&dev->gadget, crq);
 	if (ret < 0) {
 		if (dev->req_config) {
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debdd79b8..418163894775 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
 	__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
 }
 
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
 extern void pxa27x_clear_otgph(void);
 #else
 #define pxa27x_clear_otgph()	do {} while (0)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91c..2eb658d26394 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
 	return 0;
 }
 
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct xhci_ring	*ep_ring;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+	ep_ring = virt_dev->eps[0].ring;
+	/*
+	 * FIXME we don't keep track of the dequeue pointer very well after a
+	 * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+	 * host to our enqueue pointer.  This should only be called after a
+	 * configured device has reset, so all control transfers should have
+	 * been completed or cancelled before the reset.
+	 */
+	ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+	ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 	return EP_INTERVAL(interval);
 }
 
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
  * High speed endpoint descriptors can define "the number of additional
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
-	if (udev->speed != USB_SPEED_SUPER)
+	if (udev->speed != USB_SPEED_SUPER ||
+			!usb_endpoint_xfer_isoc(&ep->desc))
 		return 0;
 	return ep->ss_ep_comp.bmAttributes;
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94e6934edb09..bfc99a939455 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2380,16 +2380,19 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 		u32 field3, u32 field4, bool command_must_succeed)
 {
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+	int ret;
+
 	if (!command_must_succeed)
 		reserved_trbs++;
 
-	if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
-		if (!in_interrupt())
-			xhci_err(xhci, "ERR: No room for command on command ring\n");
+	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+			reserved_trbs, GFP_ATOMIC);
+	if (ret < 0) {
+		xhci_err(xhci, "ERR: No room for command on command ring\n");
 		if (command_must_succeed)
 			xhci_err(xhci, "ERR: Reserved TRB counting for "
 					"unfailable commands failed.\n");
-		return -ENOMEM;
+		return ret;
 	}
 	queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
 			field4 | xhci->cmd_ring->cycle_state);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd04da0..3998f72cd0c4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* If this is a Set Address to an unconfigured device, setup ep 0 */
 	if (!udev->config)
 		xhci_setup_addressable_virt_dev(xhci, udev);
+	else
+		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
 	/* Otherwise, assume the core has the device configured how it wants */
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d39f79c..6c7e3430ec93 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+		struct usb_device *udev);
 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d930386b65..d25814c172b2 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file)
 	}
 
 	if (!sisusb->devinit) {
-		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+		if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+		    sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
 			if (sisusb_init_gfxdevice(sisusb, 0)) {
 				mutex_unlock(&sisusb->lock);
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
 
 	sisusb->present = 1;
 
-	if (dev->speed == USB_SPEED_HIGH) {
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
 		int initscreen = 1;
 #ifdef INCL_SISUSB_CON
 		if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f8f9ac..3c48e77a0aa2 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on);
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
 
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-}
-#endif
-
 /*
  * Checks the revision. We need to use the DMA register as 3.0 does not
  * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index da7e334b0407..e298dc4baed7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -691,6 +691,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -737,6 +738,14 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bbc159a1df45..d01946db8fac 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -696,6 +696,12 @@
 #define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
 
 /*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID			0x2100	/* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+
+/*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
  */
@@ -1017,3 +1023,12 @@
 #define MJSG_SR_RADIO_PID	0x9379
 #define MJSG_XM_RADIO_PID	0x937A
 #define MJSG_HD_RADIO_PID	0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID	0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID	0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID	0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID	0xBCA4
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8e12f7..5cd30e4345c6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb);
 #define AMOI_PRODUCT_H01			0x0800
 #define AMOI_PRODUCT_H01A			0x7002
 #define AMOI_PRODUCT_H02			0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2		0x0407
 
 #define DELL_VENDOR_ID				0x413C
 
@@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb);
 #define QISDA_PRODUCT_H21_4512			0x4512
 #define QISDA_PRODUCT_H21_4523			0x4523
 #define QISDA_PRODUCT_H20_4515			0x4515
+#define QISDA_PRODUCT_H20_4518			0x4518
 #define QISDA_PRODUCT_H20_4519			0x4519
 
 /* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
 
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) },		/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) },		/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 93d72eb8cafc..cde67cacb2c3 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
 	{USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
 	{USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb08d788..d47b56e9e8ce 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
+	{ USB_DEVICE(0x1199, 0x0301) },	/* Sierra Wireless USB Dongle 250U */
 	/* Sierra Wireless C597 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
 	/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 44716427c51c..64ec073e89de 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 
 	/* fill the common fields in the URB */
 	us->current_urb->context = &urb_done;
-	us->current_urb->actual_length = 0;
-	us->current_urb->error_count = 0;
-	us->current_urb->status = 0;
+	us->current_urb->transfer_flags = 0;
 
 	/* we assume that if transfer_buffer isn't us->iobuf then it
 	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's