diff options
| author | David S. Miller <davem@davemloft.net> | 2009-05-18 21:08:20 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-05-18 21:08:20 -0700 |
| commit | bb803cfbecb03a0cf8dc7e1864f18dda6631af00 (patch) | |
| tree | 6c0989693bea6f50cfa5c6bb14f52ec19668def3 /drivers/usb | |
| parent | 3878fb6fdbceecca20b15748f807340854220f06 (diff) | |
| parent | 511e11e396dc596825ce04d53d7f6d579404bc01 (diff) | |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/scsi/fcoe/fcoe.c
Diffstat (limited to 'drivers/usb')
59 files changed, 716 insertions, 543 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 89299a5ce168..0716cdb44cd8 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB) += wusbcore/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ +obj-$(CONFIG_USB_WDM) += class/ +obj-$(CONFIG_USB_TMC) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 869d47cb6db3..0a69c0977e3f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -546,10 +546,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) tty->driver_data = acm; acm->tty = tty; - /* force low_latency on so that our tty_push actually forces the data through, - otherwise it is scheduled, and with high data rates data can get lost. */ - tty->low_latency = 1; - if (usb_autopm_get_interface(acm->control) < 0) goto early_bail; else diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3771d6e6d0cc..0fe434505ac4 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -3,7 +3,7 @@ * * This driver supports USB CDC WCM Device Management. * - * Copyright (c) 2007-2008 Oliver Neukum + * Copyright (c) 2007-2009 Oliver Neukum * * Some code taken from cdc-acm.c * @@ -610,7 +610,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) if (!buffer) goto out; - while (buflen > 0) { + while (buflen > 2) { if (buffer [1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; @@ -646,16 +646,18 @@ next_desc: spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; + /* this will be expanded and needed in hardware endianness */ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber); desc->intf = intf; INIT_WORK(&desc->rxwork, wdm_rxwork); - iface = &intf->altsetting[0]; + rv = -EINVAL; + iface = intf->cur_altsetting; + if (iface->desc.bNumEndpoints != 1) + goto err; ep = &iface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(ep)) { - rv = -EINVAL; + if (!ep || !usb_endpoint_is_int_in(ep)) goto err; - } desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; @@ -711,12 +713,19 @@ next_desc: usb_set_intfdata(intf, desc); rv = usb_register_dev(intf, &wdm_class); - dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", - intf->minor - WDM_MINOR_BASE); if (rv < 0) - goto err; + goto err3; + else + dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", + intf->minor - WDM_MINOR_BASE); out: return rv; +err3: + usb_set_intfdata(intf, NULL); + usb_buffer_free(interface_to_usbdev(desc->intf), + desc->bMaxPacketSize0, + desc->inbuf, + desc->response->transfer_dma); err2: usb_buffer_free(interface_to_usbdev(desc->intf), desc->wMaxPacketSize, diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index cadb2dc1d28a..3ba2fff71490 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -119,7 +119,7 @@ void *hcd_buffer_alloc( if (size <= pool_max [i]) return dma_pool_alloc(hcd->pool [i], mem_flags, dma); } - return dma_alloc_coherent(hcd->self.controller, size, dma, 0); + return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags); } void hcd_buffer_free( diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index df3c539f652a..308609039c73 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; - usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0); + usb_reset_endpoint(ps->dev, ep); return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 81fa8506825d..42b93da1085d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index f750eb1ab595..e7d4479de41c 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -206,6 +206,11 @@ struct hc_driver { void (*endpoint_disable)(struct usb_hcd *hcd, struct usb_host_endpoint *ep); + /* (optional) reset any endpoint state such as sequence number + and current window */ + void (*endpoint_reset)(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + /* root hub support */ int (*hub_status_data) (struct usb_hcd *hcd, char *buf); int (*hub_control) (struct usb_hcd *hcd, @@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); @@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) + /* -------------------------------------------------------------------------- */ /* Enumeration is only for the hub driver, or HCD virtual root hubs */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690f3683..b62628377654 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * the copy in usb-storage, for as long as we need two copies. */ - /* toggle was reset by the clear */ - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); + usb_reset_endpoint(dev, endp); return 0; } @@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, } /** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + +/** * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor @@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); } - dev->toggle[0] = dev->toggle[1] = 0; /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * usb_enable_endpoint - Enable an endpoint for USB communications * @dev: the device whose interface is being enabled * @ep: the endpoint - * @reset_toggle: flag to set the endpoint's toggle back to 0 + * @reset_ep: flag to reset the endpoint state * - * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers. + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. * For control endpoints, both the input and output sides are handled. */ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, - bool reset_toggle) + bool reset_ep) { int epnum = usb_endpoint_num(&ep->desc); int is_out = usb_endpoint_dir_out(&ep->desc); int is_control = usb_endpoint_xfer_control(&ep->desc); - if (is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 1, 0); + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) dev->ep_out[epnum] = ep; - } - if (!is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 0, 0); + if (!is_out || is_control) dev->ep_in[epnum] = ep; - } ep->enabled = 1; } @@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, * usb_enable_interface - Enable all the endpoints for an interface * @dev: the device whose interface is being enabled * @intf: pointer to the interface descriptor - * @reset_toggles: flag to set the endpoints' toggles back to 0 + * @reset_eps: flag to reset the endpoints' state * * Enables all the endpoints for the interface's current altsetting. */ void usb_enable_interface(struct usb_device *dev, - struct usb_interface *intf, bool reset_toggles) + struct usb_interface *intf, bool reset_eps) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) - usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles); + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); } /** @@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * This issues a standard SET_CONFIGURATION request to the device using * the current configuration. The effect is to reset most USB-related * state in the device, including interface altsettings (reset to zero), - * endpoint halts (cleared), and data toggle (only for bulk and interrupt + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt * endpoints). Other usbcore state is unchanged, including bindings of * usb device drivers to interfaces. * @@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * (multi-interface) devices. Instead, the driver for each interface may * use usb_set_interface() on the interfaces it claims. Be careful though; * some devices don't support the SET_INTERFACE request, and others won't - * reset all the interface state (notably data toggles). Resetting the whole + * reset all the interface state (notably endpoint state). Resetting the whole * configuration would affect other drivers' interfaces. * * The caller must own the device lock. @@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev) if (retval < 0) return retval; - dev->toggle[0] = dev->toggle[1] = 0; - /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dcfc072630c1..7eee400d3e32 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; /* ep0 maxpacket comes later, from device descriptor */ - usb_enable_endpoint(dev, &dev->ep0, true); + usb_enable_endpoint(dev, &dev->ep0, false); dev->can_submit = 1; /* Save readable and stable topology id, distinguishing devices diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 22c65960c429..38e531ecae4d 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -51,6 +51,7 @@ * - Gadget API (majority of optional features) * - Suspend & Remote Wakeup */ +#include <linux/delay.h> #include <linux/device.h> #include <linux/dmapool.h> #include <linux/dma-mapping.h> @@ -142,7 +143,7 @@ static struct { #define CAP_DEVICEADDR (0x014UL) #define CAP_ENDPTLISTADDR (0x018UL) #define CAP_PORTSC (0x044UL) -#define CAP_DEVLC (0x0B4UL) +#define CAP_DEVLC (0x084UL) #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) @@ -1986,6 +1987,8 @@ static int ep_enable(struct usb_ep *ep, do { dbg_event(_usb_addr(mEp), "ENABLE", 0); + mEp->qh[mEp->dir].ptr->cap = 0; + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->qh[mEp->dir].ptr->cap |= QH_IOS; else if (mEp->type == USB_ENDPOINT_XFER_ISOC) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 5c030b080d4c..381a53b3e11c 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -738,7 +738,6 @@ static struct fsg_dev *the_fsg; static struct usb_gadget_driver fsg_driver; static void close_backing_file(struct lun *curlun); -static void close_all_backing_files(struct fsg_dev *fsg); /*-------------------------------------------------------------------------*/ @@ -3593,12 +3592,10 @@ static int fsg_main_thread(void *fsg_) fsg->thread_task = NULL; spin_unlock_irq(&fsg->lock); - /* In case we are exiting because of a signal, unregister the - * gadget driver and close the backing file. */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) { + /* If we are exiting because of a signal, unregister the + * gadget driver. */ + if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) usb_gadget_unregister_driver(&fsg_driver); - close_all_backing_files(fsg); - } /* Let the unbind and cleanup routines know the thread has exited */ complete_and_exit(&fsg->thread_notifier, 0); @@ -3703,14 +3700,6 @@ static void close_backing_file(struct lun *curlun) } } -static void close_all_backing_files(struct fsg_dev *fsg) -{ - int i; - - for (i = 0; i < fsg->nluns; ++i) - close_backing_file(&fsg->luns[i]); -} - static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf) { @@ -3845,6 +3834,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); + close_backing_file(curlun); device_unregister(&curlun->dev); curlun->registered = 0; } @@ -4190,7 +4180,6 @@ autoconf_fail: out: fsg->state = FSG_STATE_TERMINATED; // The thread is dead fsg_unbind(gadget); - close_all_backing_files(fsg); complete(&fsg->thread_notifier); return rc; } @@ -4284,7 +4273,6 @@ static void __exit fsg_cleanup(void) /* Wait for the thread to finish up */ wait_for_completion(&fsg->thread_notifier); - close_all_backing_files(fsg); kref_put(&fsg->ref, fsg_release); } module_exit(fsg_cleanup); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 57d9641c6bf8..a2db0e174f2c 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -3104,7 +3104,6 @@ static int omap_udc_resume(struct platform_device *dev) /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { - .probe = omap_udc_probe, .remove = __exit_p(omap_udc_remove), .suspend = omap_udc_suspend, .resume = omap_udc_resume, @@ -3122,7 +3121,7 @@ static int __init udc_init(void) #endif "%s\n", driver_desc, use_dma ? " (dma)" : ""); - return platform_driver_register(&udc_driver); + return platform_driver_probe(&udc_driver, omap_udc_probe); } module_init(udc_init); diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 96d65ca06ecd..4007770f7ed2 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); } -static u32 eth_get_link(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - return dev->gadget->speed != USB_SPEED_UNKNOWN; -} - /* REVISIT can also support: * - WOL (by tracking suspends and issuing remote wakeup) * - msglevel (implies updated messaging) @@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net) static struct ethtool_ops ops = { .get_drvinfo = eth_get_drvinfo, - .get_link = eth_get_link + .get_link = ethtool_op_get_link, }; static void defer_kevent(struct eth_dev *dev, int flag) diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4154be375c7a..58c4d37d312a 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x1f) << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; @@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x0f) << 12; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ada5d2ba297b..556d0ec0c1f8 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -323,7 +323,7 @@ static int tt_available ( * already scheduled transactions */ if (125 < usecs) { - int ufs = (usecs / 125) - 1; + int ufs = (usecs / 125); int i; for (i = uframe; i < (uframe + ufs) && i < 8; i++) if (0 < tt_usecs[i]) { diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 958751ccea43..c2050785a819 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -254,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) asl_qset_insert_begin(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->async_work); - return 0; + return err; } /** diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1569afd6245b..e019a5058ab8 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd, } } +static void whc_endpoint_reset(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + qset->remove = 1; + + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + queue_work(whc->workqueue, &whc->async_work); + else + queue_work(whc->workqueue, &whc->periodic_work); + + qset_reset(whc, qset); + } +} + + static struct hc_driver whc_hc_driver = { .description = "whci-hcd", .product_desc = "Wireless host controller", @@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = { .urb_enqueue = whc_urb_enqueue, .urb_dequeue = whc_urb_dequeue, .endpoint_disable = whc_endpoint_disable, + .endpoint_reset = whc_endpoint_reset, .hub_status_data = wusbhc_rh_status_data, .hub_control = wusbhc_rh_control, diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index df8b85f07092..ff4ef9e910d9 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -282,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) qset_insert_in_sw_list(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->periodic_work); - return 0; + return err; } /** @@ -353,7 +360,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) qset_delete(whc, qset); } - /** * pzl_init - initialize the periodic zone list * @whc: the WHCI host controller diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 7be74314ee12..640b38fbd051 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) QH_INFO3_TX_RATE_53_3 | QH_INFO3_TX_PWR(0) /* 0 == max power */ ); + + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); } /** * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule + * schedule. + * + * The sequence number and current window are not cleared (see + * qset_reset()). */ void qset_clear(struct whc *whc, struct whc_qset *qset) { @@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) qset->remove = 0; qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); qset->qh.scratch[0] = 0; qset->qh.scratch[1] = 0; qset->qh.scratch[2] = 0; @@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) } /** + * qset_reset - reset endpoint state in a qset. + * + * Clears the sequence number and current window. This qset must not + * be in the ASL or PZL. + */ +void qset_reset(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + + qset->qh.status &= ~QH_STATUS_SEQ_MASK; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); +} + +/** * get_qset - get the qset for an async endpoint * * A new qset is created if one does not already exist. diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index d3543a181dc9..24e94d983c5e 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset); struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); void qset_delete(struct whc *whc, struct whc_qset *qset); void qset_clear(struct whc *whc, struct whc_qset *qset); +void qset_reset(struct whc *whc, struct whc_qset *qset); int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, gfp_t mem_flags); void qset_free_std(struct whc *whc, struct whc_std *std); diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index 51df7e313b38..794dba0d0f0a 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -185,6 +185,7 @@ struct whc_qhead { #define QH_STATUS_FLOW_CTRL (1 << 15) #define QH_STATUS_ICUR(i) ((i) << 5) #define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) +#define QH_STATUS_SEQ_MASK 0x1f /** * usb_pipe_to_qh_type - USB core pipe type to QH transfer type diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 569ef0fed0f6..1976e9b41800 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * trigger the "send a ZLP?" confusion. */ rndis = (maxpacket & 0x3f) == 0 + && length > maxpacket && length < 0xffff && (length % maxpacket) != 0; @@ -1228,27 +1229,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx) hw_ep = tx_ch->hw_ep; - /* Peripheral role never repurposes the - * endpoint, so immediate completion is - * safe. Host role waits for the fifo - * to empty (TXPKTRDY irq) before going - * to the next queued bulk transfer. - */ - if (is_host_active(cppi->musb)) { -#if 0 - /* WORKAROUND because we may - * not always get TXKPTRDY ... - */ - int csr; - - csr = musb_readw(hw_ep->regs, - MUSB_TXCSR); - if (csr & MUSB_TXCSR_TXPKTRDY) -#endif - completed = false; - } - if (completed) - musb_dma_completion(musb, index + 1, 1); + musb_dma_completion(musb, index + 1, 1); } else { /* Bigger transfer than we could fit in diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 338cd1611ab3..4000cf6d1e81 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2170,32 +2170,28 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message) return 0; } -static int musb_resume(struct platform_device *pdev) +static int musb_resume_early(struct platform_device *pdev) { - unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); if (!musb->clock) return 0; - spin_lock_irqsave(&musb->lock, flags); - if (musb->set_clock) musb->set_clock(musb->clock, 1); else clk_enable(musb->clock); /* for static cmos like DaVinci, register values were preserved - * unless for some reason the whole soc powered down and we're - * not treating that as a whole-system restart (e.g. swsusp) + * unless for some reason the whole soc powered down or the USB + * module got reset through the PSC (vs just being disabled). */ - spin_unlock_irqrestore(&musb->lock, flags); return 0; } #else #define musb_suspend NULL -#define musb_resume NULL +#define musb_resume_early NULL #endif static struct platform_driver musb_driver = { @@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = { .remove = __devexit_p(musb_remove), .shutdown = musb_shutdown, .suspend = musb_suspend, - .resume = musb_resume, + .resume_early = musb_resume_early, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c7ebd0867fcc..f79440cdfe7e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status) if (is_dma_capable() && ep->dma) { struct dma_controller *c = ep->musb->dma_controller; int value; + if (ep->is_in) { + /* + * The programming guide says that we must not clear + * the DMAMODE bit before DMAENAB, so we only + * clear it in the second write... + */ musb_writew(epio, MUSB_TXCSR, - 0 | MUSB_TXCSR_FLUSHFIFO); + MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); musb_writew(epio, MUSB_TXCSR, 0 | MUSB_TXCSR_FLUSHFIFO); } else { @@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) | IN token(s) are recd from Host. | -> DMA interrupt on completion | calls TxAvail. - | -> stop DMA, ~DmaEenab, + | -> stop DMA, ~DMAENAB, | -> set TxPktRdy for last short pkt or zlp | -> Complete Request | -> Continue next request (call txstate) @@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req) request->dma, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { - /* ASSERT: DMAENAB is clear */ - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAMODE); + /* + * We must not clear the DMAMODE bit + * before the DMAENAB bit -- and the + * latter doesn't always get cleared + * before we get here... + */ + csr &= ~(MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr + | MUSB_TXCSR_P_WZC_BITS); + csr &= ~MUSB_TXCSR_DMAMODE; csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_MODE); /* against programming guide */ @@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req) #elif defined(CONFIG_USB_TI_CPPI_DMA) /* program endpoint CSR first, then setup DMA */ - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_P_UNDERRUN - | MUSB_TXCSR_TXPKTRDY); + csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) @@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req) if (!use_dma) { c->channel_release(musb_ep->dma); musb_ep->dma = NULL; - /* ASSERT: DMAENAB clear */ - csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); /* invariant: prequest->buf is non-null */ } #elif defined(CONFIG_USB_TUSB_OMAP_DMA) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 499c431a6d62..db1b57415ec7 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -96,8 +97,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int nOut, - u8 *buf, u32 len); + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len); /* * Clear TX fifo. Needed to avoid BABBLE errors. @@ -125,6 +126,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) } } +static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep) +{ + void __iomem *epio = ep->regs; + u16 csr; + int retries = 5; + + /* scrub any data left in the fifo */ + do { + csr = musb_readw(epio, MUSB_TXCSR); + if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY))) + break; + musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO); + csr = musb_readw(epio, MUSB_TXCSR); + udelay(10); + } while (--retries); + + WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n", + ep->epnum, csr); + + /* and reset for the next transfer */ + musb_writew(epio, MUSB_TXCSR, 0); +} + /* * Start transmit. Caller is responsible for locking shared resources. * musb must be locked. @@ -145,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep) } -static inline void cppi_host_txdma_start(struct musb_hw_ep *ep) +static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep) { u16 txcsr; /* NOTE: no locks here; caller should lock and select EP */ txcsr = musb_readw(ep->regs, MUSB_TXCSR); txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS; + if (is_cppi_enabled()) + txcsr |= MUSB_TXCSR_DMAMODE; musb_writew(ep->regs, MUSB_TXCSR, txcsr); } @@ -166,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) { u16 frame; u32 len; - void *buf; void __iomem *mbase = musb->mregs; struct urb *urb = next_urb(qh); + void *buf = urb->transfer_buffer; + u32 offset = 0; struct musb_hw_ep *hw_ep = qh->hw_ep; unsigned pipe = urb->pipe; u8 address = usb_pipedevice(pipe); @@ -191,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: qh->iso_idx = 0; qh->frame = 0; - buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset; + offset = urb->iso_frame_desc[0].offset; len = urb->iso_frame_desc[0].length; break; default: /* bulk, interrupt */ @@ -209,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; }; s; }), - epnum, buf, len); + epnum, buf + offset, len); /* Configure endpoint */ if (is_in || hw_ep->is_shared_fifo) hw_ep->in_qh = qh; else hw_ep->out_qh = qh; - musb_ep_program(musb, epnum, urb, !is_in, buf, len); + musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); /* transmit may have more work: start it when it is time */ if (is_in) @@ -227,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: DBG(3, "check whether there's still time for periodic Tx\n"); - qh->iso_idx = 0; frame = musb_readw(mbase, MUSB_FRAME); /* FIXME this doesn't implement that scheduling policy ... * or handle framecounter wrapping @@ -256,7 +282,7 @@ start: if (!hw_ep->tx_channel) musb_h_tx_start(hw_ep); else if (is_cppi_enabled() || tusb_dma_omap()) - cppi_host_txdma_start(hw_ep); + musb_h_tx_dma_start(hw_ep); } } @@ -567,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) csr = musb_readw(ep->regs, MUSB_TXCSR); if (csr & MUSB_TXCSR_MODE) { musb_h_tx_flush_fifo(ep); + csr = musb_readw(ep->regs, MUSB_TXCSR); musb_writew(ep->regs, MUSB_TXCSR, - MUSB_TXCSR_FRCDATATOG); + csr | MUSB_TXCSR_FRCDATATOG); } - /* clear mode (and everything else) to enable Rx */ + + /* + * Clear the MODE bit (and everything else) to enable Rx. + * NOTE: we mustn't clear the DMAMODE bit before DMAENAB. + */ + if (csr & MUSB_TXCSR_DMAMODE) + musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ @@ -601,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) ep->rx_reinit = 0; } +static bool musb_tx_dma_program(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, struct musb_qh *qh, + struct urb *urb, u32 offset, u32 length) +{ + struct dma_channel *channel = hw_ep->tx_channel; + void __iomem *epio = hw_ep->regs; + u16 pkt_size = qh->maxpacket; + u16 csr; + u8 mode; + +#ifdef CONFIG_USB_INVENTRA_DMA + if (length > channel->max_len) + length = channel->max_len; + + csr = musb_readw(epio, MUSB_TXCSR); + if (length > pkt_size) { + mode = 1; + csr |= MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_DMAENAB; + } else { + mode = 0; + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); + csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ + } + channel->desired_mode = mode; + musb_writew(epio, MUSB_TXCSR, csr); +#else + if (!is_cppi_enabled() && !tusb_dma_omap()) + return false; + + channel->actual_len = 0; + + /* + * TX uses "RNDIS" mode automatically but needs help + * to identify the zero-length-final-packet case. + */ + mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; +#endif + + qh->segsize = length; + + if (!dma->channel_program(channel, pkt_size, mode, + urb->transfer_dma + offset, length)) { + dma->channel_release(channel); + hw_ep->tx_channel = NULL; + + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS); + return false; + } + return true; +} /* * Program an HDRC endpoint as per the given URB * Context: irqs blocked, controller lock held */ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int is_out, - u8 *buf, u32 len) + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len) { struct dma_controller *dma_controller; struct dma_channel *dma_channel; @@ -667,12 +754,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* general endpoint setup */ if (epnum) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* flush all old state, set default */ musb_h_tx_flush_fifo(hw_ep); + + /* + * We must not clear the DMAMODE bit before or in + * the same cycle with the DMAENAB bit, so we clear + * the latter first... + */ csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT - | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB | MUSB_TXCSR_FRCDATATOG | MUSB_TXCSR_H_RXSTALL | MUSB_TXCSR_H_ERROR @@ -680,24 +772,20 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (usb_gettoggle(urb->dev, - qh->epnum, 1)) + if (usb_gettoggle(urb->dev, qh->epnum, 1)) csr |= MUSB_TXCSR_H_WR_DATATOGGLE | MUSB_TXCSR_H_DATATOGGLE; else csr |= MUSB_TXCSR_CLRDATATOG; - /* twice in case of double packet buffering */ musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ + csr &= ~MUSB_TXCSR_DMAMODE; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); } else { /* endpoint 0: just flush */ - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); + musb_h_ep0_flush_fifo(hw_ep); } /* target addr and (for multipoint) hub addr/port */ @@ -734,113 +822,14 @@ static void musb_ep_program(struct musb *musb, u8 epnum, else load_count = min((u32) packet_sz, len); -#ifdef CONFIG_USB_INVENTRA_DMA - if (dma_channel) { - - /* clear previous state */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - qh->segsize = min(len, dma_channel->max_len); - - if (qh->segsize <= packet_sz) - dma_channel->desired_mode = 0; - else - dma_channel->desired_mode = 1; - - - if (dma_channel->desired_mode == 0) { - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE); - csr |= (MUSB_TXCSR_DMAENAB); - /* against programming guide */ - } else - csr |= (MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE); - - musb_writew(epio, MUSB_TXCSR, csr); - - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - dma_channel->desired_mode, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - if (is_out) - hw_ep->tx_channel = NULL; - else - hw_ep->rx_channel = NULL; - dma_channel = NULL; - } - } -#endif - - /* candidate for DMA */ - if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { - - /* program endpoint CSRs first, then setup DMA. - * assume CPPI setup succeeds. - * defer enabling dma. - */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - dma_channel->actual_len = 0L; - qh->segsize = len; - - /* TX uses "rndis" mode automatically, but needs help - * to identify the zero-length-final-packet case. - */ - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - (urb->transfer_flags - & URB_ZERO_PACKET) - == URB_ZERO_PACKET, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - hw_ep->tx_channel = NULL; - dma_channel = NULL; - - /* REVISIT there's an error path here that - * needs handling: can't do dma, but - * there's no pio buffer address... - */ - } - } + if (dma_channel && musb_tx_dma_program(dma_controller, + hw_ep, qh, urb, offset, len)) + load_count = 0; if (load_count) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* PIO to load FIFO */ qh->segsize = load_count; musb_write_fifo(hw_ep, load_count, buf); - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_AUTOSET); - /* write CSR */ - csr |= MUSB_TXCSR_MODE; - - if (epnum) - musb_writew(epio, MUSB_TXCSR, csr); } /* re-enable interrupt */ @@ -895,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, dma_channel, packet_sz, !(urb->transfer_flags & URB_SHORT_NOT_OK), - urb->transfer_dma, + urb->transfer_dma + offset, qh->segsize); if (!dma_ok) { dma_controller->channel_release( @@ -1063,11 +1052,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr &= ~MUSB_CSR0_H_NAKTIMEOUT; musb_writew(epio, MUSB_CSR0, csr); } else { - csr |= MUSB_CSR0_FLUSHFIFO; - musb_writew(epio, MUSB_CSR0, csr); - musb_writew(epio, MUSB_CSR0, csr); - csr &= ~MUSB_CSR0_H_NAKTIMEOUT; - musb_writew(epio, MUSB_CSR0, csr); + musb_h_ep0_flush_fifo(hw_ep); } musb_writeb(epio, MUSB_NAKLIMIT0, 0); @@ -1081,10 +1066,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) * SHOULD NEVER HAPPEN! */ ERR("no URB for end 0\n"); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, 0); - + musb_h_ep0_flush_fifo(hw_ep); goto done; } @@ -1145,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) int pipe; bool done = false; u16 tx_csr; - size_t wLength = 0; - u8 *buf = NULL; + size_t length = 0; + size_t offset = 0; struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; @@ -1164,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* with CPPI, DMA sometimes triggers "extra" irqs */ if (!urb) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; } pipe = urb->pipe; @@ -1201,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - goto finish; + return; } if (status) { @@ -1233,29 +1215,89 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* second cppi case */ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; + } + + if (is_dma_capable() && dma && !status) { + /* + * DMA has completed. But if we're using DMA mode 1 (multi + * packet DMA), we need a terminal TXPKTRDY interrupt before + * we can consider this transfer completed, lest we trash + * its last packet when writing the next URB's data. So we + * switch back to mode 0 to get that interrupt; we'll come + * back here once it happens. + */ + if (tx_csr & MUSB_TXCSR_DMAMODE) { + /* + * We shouldn't clear DMAMODE with DMAENAB set; so + * clear them in a safe order. That should be OK + * once TXPKTRDY has been set (and I've never seen + * it being 0 at this moment -- DMA interrupt latency + * is significant) but if it hasn't been then we have + * no choice but to stop being polite and ignore the + * programmer's guide... :-) + * + * Note that we must write TXCSR with TXPKTRDY cleared + * in order not to re-trigger the packet send (this bit + * can't be cleared by CPU), and there's another caveat: + * TXPKTRDY may be set shortly and then cleared in the + * double-buffered FIFO mode, so we do an extra TXCSR + * read for debouncing... + */ + tx_csr &= musb_readw(epio, MUSB_TXCSR); + if (tx_csr & MUSB_TXCSR_TXPKTRDY) { + tx_csr &= ~(MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + } + tx_csr &= ~(MUSB_TXCSR_DMAMODE | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + + /* + * There is no guarantee that we'll get an interrupt + * after clearing DMAMODE as we might have done this + * too late (after TXPKTRDY was cleared by controller). + * Re-read TXCSR as we have spoiled its previous value. + */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + } + /* + * We may get here from a DMA completion or TXPKTRDY interrupt. + * In any case, we must check the FIFO status here and bail out + * only if the FIFO still has data -- that should prevent the + * "missed" TXPKTRDY interrupts and deal with double-buffered + * FIFO mode too... + */ + if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) { + DBG(2, "DMA complete but packet still in FIFO, " + "CSR %04x\n", tx_csr); + return; + } } - /* REVISIT this looks wrong... */ if (!status || dma || usb_pipeisoc(pipe)) { if (dma) - wLength = dma->actual_len; + length = dma->actual_len; else - wLength = qh->segsize; - qh->offset += wLength; + length = qh->segsize; + qh->offset += length; if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = qh->segsize; + d->actual_length = length; + d->status = status; if (++qh->iso_idx >= urb->number_of_packets) { done = true; } else { d++; - buf = urb->transfer_buffer + d->offset; - wLength = d->length; + offset = d->offset; + length = d->length; } } else if (dma) { done = true; @@ -1268,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) & URB_ZERO_PACKET)) done = true; if (!done) { - buf = urb->transfer_buffer - + qh->offset; - wLength = urb->transfer_buffer_length - - qh->offset; + offset = qh->offset; + length = urb->transfer_buffer_length - offset; } } } @@ -1290,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) urb->status = status; urb->actual_length = qh->offset; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT); + return; + } else if (usb_pipeisoc(pipe) && dma) { + if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, + offset, length)) + return; + } else if (tx_csr & MUSB_TXCSR_DMAENAB) { + DBG(1, "not complete, but DMA enabled?\n"); + return; + } - } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) { - /* WARN_ON(!buf); */ - - /* REVISIT: some docs say that when hw_ep->tx_double_buffered, - * (and presumably, fifo is not half-full) we should write TWO - * packets before updating TXCSR ... other docs disagree ... - */ - /* PIO: start next packet in this URB */ - if (wLength > qh->maxpacket) - wLength = qh->maxpacket; - musb_write_fifo(hw_ep, wLength, buf); - qh->segsize = wLength; - - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - } else - DBG(1, "not complete, but dma enabled?\n"); + /* + * PIO: start next packet in this URB. + * + * REVISIT: some docs say that when hw_ep->tx_double_buffered, + * (and presumably, FIFO is not half-full) we should write *two* + * packets before updating TXCSR; other docs disagree... + */ + if (length > qh->maxpacket) + length = qh->maxpacket; + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + qh->segsize = length; -finish: - return; + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); } @@ -1841,7 +1884,7 @@ static int musb_urb_enqueue( unsigned long flags; struct musb *musb = hcd_to_musb(hcd); struct usb_host_endpoint *hep = urb->ep; - struct musb_qh *qh = hep->hcpriv; + struct musb_qh *qh; struct usb_endpoint_descriptor *epd = &hep->desc; int ret; unsigned type_reg; @@ -1853,22 +1896,21 @@ static int musb_urb_enqueue( spin_lock_irqsave(&musb->lock, flags); ret = usb_hcd_link_urb_to_ep(hcd, urb); + qh = ret ? NULL : hep->hcpriv; + if (qh) + urb->hcpriv = qh; spin_unlock_irqrestore(&musb->lock, flags); - if (ret) - return ret; /* DMA mapping was already done, if needed, and this urb is on - * hep->urb_list ... so there's little to do unless hep wasn't - * yet scheduled onto a live qh. + * hep->urb_list now ... so we're done, unless hep wasn't yet + * scheduled onto a live qh. * * REVISIT best to keep hep->hcpriv valid until the endpoint gets * disabled, testing for empty qh->ring and avoiding qh setup costs * except for the first urb queued after a config change. */ - if (qh) { - urb->hcpriv = qh; - return 0; - } + if (qh || ret) + return ret; /* Allocate and initialize qh, minimizing the work done each time * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it. @@ -2044,7 +2086,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) * endpoint's irq status here to avoid bogus irqs. * clearing that status is platform-specific... */ - } else { + } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); csr &= ~(MUSB_TXCSR_AUTOSET @@ -2058,6 +2100,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) musb_writew(epio, MUSB_TXCSR, csr); /* flush cpu writebuffer */ csr = musb_readw(epio, MUSB_TXCSR); + } else { + musb_h_ep0_flush_fifo(ep); } if (status == 0) musb_advance_schedule(ep->musb, urb, ep, is_in); diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 8662e9e159c3..5e83f96d6b77 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel) void __iomem *mbase = musb_channel->controller->base; u8 bchannel = musb_channel->idx; + int offset; u16 csr; if (channel->status == MUSB_DMA_STATUS_BUSY) { if (musb_channel->transmit) { - - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_TXCSR)); - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAENAB | - MUSB_TXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR), - csr); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_TXCSR); + + /* + * The programming guide says that we must clear + * the DMAENAB bit before the DMAMODE bit... + */ + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(mbase, offset, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, csr); } else { - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_RXCSR)); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_RXCSR); + + csr = musb_readw(mbase, offset); csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR), - csr); + musb_writew(mbase, offset, csr); } musb_writew(mbase, @@ -296,20 +298,28 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) && ((channel->desired_mode == 0) || (channel->actual_len & (musb_channel->max_packet_sz - 1))) - ) { + ) { + u8 epnum = musb_channel->epnum; + int offset = MUSB_EP_OFFSET(epnum, + MUSB_TXCSR); + u16 txcsr; + + /* + * The programming guide says that we + * must clear DMAENAB before DMAMODE. + */ + musb_ep_select(mbase, epnum); + txcsr = musb_readw(mbase, offset); + txcsr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(mbase, offset, txcsr); /* Send out the packet */ - musb_ep_select(mbase, - musb_channel->epnum); - musb_writew(mbase, MUSB_EP_OFFSET( - musb_channel->epnum, - MUSB_TXCSR), - MUSB_TXCSR_TXPKTRDY); - } else { - musb_dma_completion( - musb, - musb_channel->epnum, - musb_channel->transmit); + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_TXPKTRDY; + musb_writew(mbase, offset, txcsr); } + musb_dma_completion(musb, musb_channel->epnum, + musb_channel->transmit); } } } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 901dffdf23b1..60924ce08493 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -3,7 +3,6 @@ * Some code has been taken from tusb6010.c * Copyrights for that are attributable to: * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula <jarkko.nikula@nokia.com> * Tony Lindgren <tony@atomide.com> * * This file is part of the Inventra Controller Driver for Linux. diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9e20fd070d71..4ac1477d3569 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -2,7 +2,6 @@ * TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula <jarkko.nikula@nokia.com> * Tony Lindgren <tony@atomide.com> * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index ab8c96286ce6..35c933a5d991 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -2,7 +2,6 @@ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula <jarkko.nikula@nokia.com> * Tony Lindgren <tony@atomide.com> * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 4b933f646f2e..c567168f89af 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -36,14 +36,14 @@ struct nop_usb_xceiv { struct device *dev; }; -static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; +static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32); static struct platform_device nop_xceiv_device = { .name = "nop_usb_xceiv", .id = -1, .dev = { .dma_mask = &nop_xceiv_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = NULL, }, }; diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index ff318fae7d4d..0a43a7db750f 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -43,7 +43,8 @@ EXPORT_SYMBOL(otg_get_transceiver); */ void otg_put_transceiver(struct otg_transceiver *x) { - put_device(x->dev); + if (x) + put_device(x->dev); } EXPORT_SYMBOL(otg_put_transceiver); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 858bdd038fbc..dd501bb63ed6 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -175,13 +175,6 @@ static int cyberjack_open(struct tty_struct *tty, dbg("%s - usb_clear_halt", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - priv = usb_get_serial_port_data(port); spin_lock_irqsave(&priv->lock, flags); priv->rdtodo = 0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index eae4740d448c..e568710b263f 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* setting to zero could cause data loss */ - if (tty) - tty->low_latency = 1; - /* raise both lines and set termios */ spin_lock_irqsave(&priv->lock, flags); priv->line_control = CONTROL_DTR | CONTROL_RTS; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8a69cce40b6d..c709ec474a80 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty, termios->c_cflag |= CS8; /* character size 8 bits */ - /* - * Force low_latency on; otherwise the pushes are scheduled; - * this is bad as it opens up the possibility of dropping bytes - * on the floor. We don't want to drop bytes on the floor. :) - */ - tty->low_latency = 1; tty_encode_baud_rate(tty, 115200, 115200); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index dcc87aaa8628..0ab8474b00cb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { + struct kref kref; ftdi_chip_type_t chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -668,6 +669,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, + { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1351,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } + kref_init(&priv->kref); spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); @@ -1467,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial) dbg("%s", __func__); } +static void ftdi_sio_priv_release(struct kref *k) +{ + struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); + + kfree(priv); +} + static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1481,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) if (priv) { usb_set_serial_port_data(port, NULL); - kfree(priv); + kref_put(&priv->kref, ftdi_sio_priv_release); } return 0; @@ -1546,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty, dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - + else + kref_get(&priv->kref); return result; } /* ftdi_open */ @@ -1588,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty, mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ - cancel_delayed_work(&priv->rx_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&priv->rx_work); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); + kref_put(&priv->kref, ftdi_sio_priv_release); } /* ftdi_close */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index daaf63db0b50..12330fa1c095 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -913,6 +913,19 @@ #define ADI_GNICE_PID 0xF000 /* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index a26a0e2cdb4a..586d30ff450b 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9d57cace3731..4cec9906ccf3 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* force low_latency on so that our tty_push actually forces the data - through, otherwise it is scheduled, and with high data rates (like - with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); port->throttled = 0; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e85c8c0d1ad9..fb4a73d090f6 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = { /* local variables */ static int debug; -static int low_latency = 1; /* tty low latency flag, on by default */ - static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ @@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - /* see if we've set up our endpoint info yet (can't set it up in edge_startup as the structures were not set up at that time.) */ serial = port->serial; @@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); - -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index c3cdd00ddc41..513b25e044c1 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc { #define EDGE_READ_URB_STOPPING 1 #define EDGE_READ_URB_STOPPED 2 -#define EDGE_LOW_LATENCY 1 #define EDGE_CLOSING_WAIT 4000 /* in .01 sec */ #define EDGE_OUT_BUF_SIZE 1024 @@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber; static int debug; -static int low_latency = EDGE_LOW_LATENCY; static int closing_wait = EDGE_CLOSING_WAIT; static int ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - port_number = port->number - port->serial->minor; switch (port_number) { case 0: @@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index ef92095b0732..cd62825a9ac3 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty, priv->free_len += PACKET_SIZE; } - /* - * Force low latency on. This will immediately push data to the line - * discipline instead of queueing. - */ - if (tty) { - tty->low_latency = 1; /* FIXME: These two are bogus */ tty->raw = 1; tty->real_raw = 1; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index f530032ed93d..da2a2b46644a 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty, if (!buf_flow_init) return -ENOMEM; - if (tty) - tty->low_latency = 1; - /* --1: Tell the modem to initialize (we think) From sniffs this is * always the first thing that gets sent to the modem during * opening of the device */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 2314c6ae4fc2..4473d442b2aa 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty, tty->termios->c_oflag = 0; tty->termios->c_iflag = 0; priv->termios_initialized = 1; - tty->low_latency = 1; priv->poll = 0; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 6286baad9392..c148544953b3 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty, /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; - - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ if (tty) { - tty->low_latency = 1; /* Default to echo off and other sane device settings */ tty->termios->c_lflag = 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e772cc0a97fd..24e3b5d4b4d4 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty, data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - - if (tty) - tty->low_latency = 1; - /* see if we've set up our endpoint info yet * * (can't set it up in mos7720_startup as the * * structures were not set up at that time.) */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2c20e88a91b3..84fb1dcd30dc 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -38,7 +38,7 @@ /* * Version Information */ -#define DRIVER_VERSION "1.3.1" +#define DRIVER_VERSION "1.3.2" #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" /* @@ -123,6 +123,11 @@ #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +/* This driver also supports the ATEN UC2324 device since it is mos7840 based + * - if I knew the device id it would also support the ATEN UC2322 */ +#define USB_VENDOR_ID_ATENINTL 0x0557 +#define ATENINTL_DEVICE_ID_UC2324 0x2011 + /* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 @@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; @@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; @@ -1000,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty, status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* Check to see if we've set up our endpoint info yet * * (can't set it up in mos7840_startup as the structures * * were not set up at that time.) */ @@ -2477,9 +2478,14 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_set_port_private(serial->port[i], mos7840_port); spin_lock_init(&mos7840_port->pool_lock); - mos7840_port->port_num = ((serial->port[i]->number - - (serial->port[i]->serial->minor)) + - 1); + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = i + 1; + dbg ("serial->port[i]->number = %d", serial->port[i]->number); + dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); + dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); + dbg ("serial->minor = %d", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2690,13 +2696,16 @@ static void mos7840_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - spin_lock_irqsave(&mos7840_port->pool_lock, flags); - mos7840_port->zombie = 1; - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - usb_kill_urb(mos7840_port->control_urb); - kfree(mos7840_port->ctrl_buf); - kfree(mos7840_port->dr); - kfree(mos7840_port); + dbg ("mos7840_port %d = %p", i, mos7840_port); + if (mos7840_port) { + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + mos7840_port->zombie = 1; + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + usb_kill_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); + } mos7840_set_port_private(serial->port[i], NULL); } diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 2e8e05462ef7..b66b71ccd12b 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ + { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 839583dc8b6a..b500ad10b758 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, priv->port = port; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, usb_rcvbulkpipe(priv->udev, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d560c0b54e6e..7817b82889ca 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial); #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 +#define DLINK_VENDOR_ID 0x1186 +#define DLINK_PRODUCT_DWM_652 0x3e04 + + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; @@ -931,9 +936,6 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - if (tty) - tty->low_latency = 1; - option_send_setup(tty, port); return 0; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e6d6b0c17fd9..7528b8d57f1c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ + {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ + {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */ + {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d9bf9a5c20ec..913225c61610 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> */ -#define DRIVER_VERSION "v.1.3.2" +#define DRIVER_VERSION "v.1.3.3" #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty, val |= 0x02; /* If composite device then properly report interface */ - if (serial->num_ports == 1) + if (serial->num_ports == 1) { interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + } + /* Otherwise the need to do non-composite mapping */ else { if (port->bulk_out_endpointAddress == 2) @@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty, interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - } - return usb_control_msg(serial->dev, + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + + } } return 0; @@ -585,9 +598,6 @@ static int sierra_open(struct tty_struct *tty, } } - if (tty) - tty->low_latency = 1; - sierra_send_setup(tty, port); /* start up the interrupt endpoint if we have one */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 2620bf6fe5e1..0a64bac306ee 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -50,11 +50,10 @@ #define TI_TRANSFER_TIMEOUT 2 -#define TI_DEFAULT_LOW_LATENCY 0 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ /* supported setserial flags */ -#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY) +#define TI_SET_SERIAL_FLAGS 0 /* read urb states */ #define TI_READ_URB_RUNNING 0 @@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count); /* module parameters */ static int debug; -static int low_latency = TI_DEFAULT_LOW_LATENCY; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; @@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, - "TTY low_latency flag, 0=off, 1=on, default is off"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); @@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial) spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); - tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; tport->tp_closing_wait = closing_wait; init_waitqueue_head(&tport->tp_msr_wait); init_waitqueue_head(&tport->tp_write_wait); @@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty, if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - if (tty) - tty->low_latency = - (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; - port_number = port->number - port->serial->minor; memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); @@ -1215,20 +1204,22 @@ static void ti_bulk_in_callback(struct urb *urb) } tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - usb_serial_debug_data(debug, dev, __func__, - urb->actual_length, urb->transfer_buffer); - - if (!tport->tp_is_open) - dbg("%s - port closed, dropping data", __func__); - else - ti_recv(&urb->dev->dev, tty, + if (tty) { + if (urb->actual_length) { + usb_serial_debug_data(debug, dev, __func__, + urb->actual_length, urb->transfer_buffer); + + if (!tport->tp_is_open) + dbg("%s - port closed, dropping data", + __func__); + else + ti_recv(&urb->dev->dev, tty, urb->transfer_buffer, urb->actual_length); - - spin_lock(&tport->tp_lock); - tport->tp_icount.rx += urb->actual_length; - spin_unlock(&tport->tp_lock); + spin_lock(&tport->tp_lock); + tport->tp_icount.rx += urb->actual_length; + spin_unlock(&tport->tp_lock); + } tty_kref_put(tty); } @@ -1452,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, return -EFAULT; tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; tport->tp_closing_wait = new_serial.closing_wait; return 0; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2a70563bbee1..0a566eea49c0 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref) dbg("%s - %s", __func__, serial->type->description); - serial->type->shutdown(serial); - /* return the minor range that this device had */ if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - for (i = 0; i < serial->num_ports; ++i) - serial->port[i]->port.count = 0; - - /* the ports are cleaned up and released in port_release() */ - for (i = 0; i < serial->num_ports; ++i) - if (serial->port[i]->dev.parent != NULL) { - device_unregister(&serial->port[i]->dev); - serial->port[i] = NULL; - } - /* If this is a "fake" port, we have to clean it up here, as it will * not get cleaned up in port_release() as it was never registered with * the driver core */ @@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp) struct usb_serial *serial; struct usb_serial_port *port; unsigned int portNumber; - int retval; + int retval = 0; dbg("%s", __func__); @@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp) return -ENODEV; } + mutex_lock(&serial->disc_mutex); portNumber = tty->index - serial->minor; port = serial->port[portNumber]; - if (!port) { - retval = -ENODEV; - goto bailout_kref_put; - } - - if (port->serial->disconnected) { + if (!port || serial->disconnected) retval = -ENODEV; - goto bailout_kref_put; - } + else + get_device(&port->dev); + /* + * Note: Our locking order requirement does not allow port->mutex + * to be acquired while serial->disc_mutex is held. + */ + mutex_unlock(&serial->disc_mutex); + if (retval) + goto bailout_serial_put; if (mutex_lock_interruptible(&port->mutex)) { retval = -ERESTARTSYS; - goto bailout_kref_put; + goto bailout_port_put; } ++port->port.count; @@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_mutex_unlock; } - retval = usb_autopm_get_interface(serial->interface); + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) + retval = -ENODEV; + else + retval = usb_autopm_get_interface(serial->interface); if (retval) goto bailout_module_put; + /* only call the device specific open if this * is the first time the port is opened */ retval = serial->type->open(tty, port, filp); if (retval) goto bailout_interface_put; + mutex_unlock(&serial->disc_mutex); } mutex_unlock(&port->mutex); @@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp) bailout_interface_put: usb_autopm_put_interface(serial->interface); bailout_module_put: + mutex_unlock(&serial->disc_mutex); module_put(serial->type->driver.owner); bailout_mutex_unlock: port->port.count = 0; tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); mutex_unlock(&port->mutex); -bailout_kref_put: +bailout_port_put: + put_device(&port->dev); +bailout_serial_put: usb_serial_put(serial); return retval; } @@ -262,6 +262,9 @@ bailout_kref_put: static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + struct module *owner; + int count; if (!port) return; @@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp) dbg("%s - port %d", __func__, port->number); mutex_lock(&port->mutex); + serial = port->serial; + owner = serial->type->driver.owner; if (port->port.count == 0) { mutex_unlock(&port->mutex); @@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) * this before we drop the port count. The call is protected * by the port mutex */ - port->serial->type->close(tty, port, filp); + serial->type->close(tty, port, filp); if (port->port.count == (port->console ? 2 : 1)) { struct tty_struct *tty = tty_port_tty_get(&port->port); @@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp) } } - if (port->port.count == 1) { - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - usb_autopm_put_interface(port->serial->interface); - mutex_unlock(&port->serial->disc_mutex); - module_put(port->serial->type->driver.owner); - } --port->port.count; - + count = port->port.count; mutex_unlock(&port->mutex); - usb_serial_put(port->serial); + put_device(&port->dev); + + /* Mustn't dereference port any more */ + if (count == 0) { + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); + } + usb_serial_put(serial); + + /* Mustn't dereference serial any more */ + if (count == 0) + module_put(owner); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port) static void port_free(struct usb_serial_port *port) { + /* + * Stop all the traffic before cancelling the work, so that + * nobody will restart it by calling usb_serial_port_softint. + */ kill_traffic(port); + cancel_work_sync(&port->work); + usb_free_urb(port->read_urb); usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); @@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port) kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); - flush_scheduled_work(); /* port->work */ kfree(port); } @@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface) usb_set_intfdata(interface, NULL); /* must set a flag, to signal subdrivers */ serial->disconnected = 1; + mutex_unlock(&serial->disc_mutex); + + /* Unfortunately, many of the sub-drivers expect the port structures + * to exist when their shutdown method is called, so we have to go + * through this awkward two-step unregistration procedure. + */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) { @@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface) tty_kref_put(tty); } kill_traffic(port); + cancel_work_sync(&port->work); + device_del(&port->dev); + } + } + serial->type->shutdown(serial); + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) { + put_device(&port->dev); + serial->port[i] = NULL; } } + /* let the last holder of this object * cause it to be cleaned up */ - mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 4facce3d9364..5ac414bda718 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, priv->throttled = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5be54c019662..ef7e5a8ceab5 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,8 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ ifeq ($(CONFIG_USB_LIBUSUAL),) usb-storage-objs += usual-tables.o else - obj-$(CONFIG_USB) += libusual.o usual-tables.o + obj-$(CONFIG_USB) += usb-libusual.o + usb-libusual-objs := libusual.o usual-tables.o endif obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 49aedb36dc19..fcb320217218 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) USB_ENDPOINT_HALT, endp, NULL, 0, 3*HZ); - /* reset the endpoint toggle */ if (result >= 0) - usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 0); + usb_reset_endpoint(us->pusb_dev, endp); US_DEBUGP("%s: result = %d\n", __func__, result); return result; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1c1f643e8a78..4b8b69045fe6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,8 +160,9 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Andrew Nayenko <relan@bk.ru> */ -UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, +/* Reported by Andrew Nayenko <relan@bk.ru> + * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288", US_SC_DEVICE, US_PR_DEVICE, NULL, @@ -975,12 +976,14 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), -/* Reported by Rauch Wolke <rauchwolke@gmx.net> */ +/* Reported by Rauch Wolke <rauchwolke@gmx.net> + * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) + */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, "Simple Tech/Datafab", "CF+SM Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), + US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: @@ -1376,6 +1379,14 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +/* Reported by Pascal Terjan <pterjan@mandriva.com> + * Ignore driver CD mode and force into modem mode by default. + */ +UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, + "D-Link", + "USB Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), + /* Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem @@ -1841,6 +1852,12 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), +/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */ +UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, + "TGE", + "Digital MP3 Audio Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 386eaa22d215..4ac4300a3f9a 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work) mutex_lock(&wusbhc->mutex); wusbhc_devconnect_acked(wusbhc, wusb_dev); mutex_unlock(&wusbhc->mutex); + + wusb_dev_put(wusb_dev); } /* @@ -396,7 +398,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, /* After a device disconnects, change the GTK (see [WUSB] * section 6.2.11.2). */ - wusbhc_gtk_rekey(wusbhc); + if (wusbhc->active) + wusbhc_gtk_rekey(wusbhc); /* The Wireless USB part has forgotten about the device already; now * khubd's timer will pick up the disconnection and remove the USB @@ -1084,15 +1087,21 @@ error_mmcie_set: * wusbhc_devconnect_stop - stop managing connected devices * @wusbhc: the WUSB HC * - * Removes the Host Info IE and stops the keep alives. - * - * FIXME: should this disconnect all devices? + * Disconnects any devices still connected, stops the keep alives and + * removes the Host Info IE. */ void wusbhc_devconnect_stop(struct wusbhc *wusbhc) { - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - WARN_ON(!list_empty(&wusbhc->cack_list)); + int i; + mutex_lock(&wusbhc->mutex); + for (i = 0; i < wusbhc->ports_max; i++) { + if (wusbhc->port[i].wusb_dev) + __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); + } + mutex_unlock(&wusbhc->mutex); + + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); kfree(wusbhc->wuie_host_info); wusbhc->wuie_host_info = NULL; diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 07c63a31c799..ee6256f23636 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, wusb_trust_timeout_store); /* - * Show & store the current WUSB CHID + * Show the current WUSB CHID. */ static ssize_t wusb_chid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + const struct wusb_ckhdid *chid; ssize_t result = 0; if (wusbhc->wuie_host_info != NULL) - result += ckhdid_printf(buf, PAGE_SIZE, - &wusbhc->wuie_host_info->CHID); + chid = &wusbhc->wuie_host_info->CHID; + else + chid = &wusb_ckhdid_zero; + + result += ckhdid_printf(buf, PAGE_SIZE, chid); + result += sprintf(buf + result, "\n"); + return result; } /* - * Store a new CHID - * - * This will (FIXME) trigger many changes. - * - * - Send an all zeros CHID and it will stop the controller - * - Send a non-zero CHID and it will start it - * (unless it was started, it will just change the CHID, - * diconnecting all devices first). + * Store a new CHID. * - * So first we scan the MMC we are sent and then we act on it. We - * read it in the same format as we print it, an ASCII string of 16 - * hex bytes. + * - Write an all zeros CHID and it will stop the controller + * - Write a non-zero CHID and it will start it. * * See wusbhc_chid_set() for more info. */ @@ -339,13 +337,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) { struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (status == 0) { + if (status == 0 && wusb_dev) { wusb_dev->entry_ts = jiffies; - /* wusbhc_devconnect_acked() can't be called from from + /* wusbhc_devconnect_acked() can't be called from atomic context so defer it to a work queue. */ if (!list_empty(&wusb_dev->cack_node)) queue_work(wusbd, &wusb_dev->devconnect_acked_work); + else + wusb_dev_put(wusb_dev); } usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); |