Merge tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...

98 files changed, 4112 insertions, 2155 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 2e6b832e004b..e0cad4418085 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,10 +2,6 @@
 # USB device configuration
 #
 
-# These are unused now, remove them once they are no longer selected
-config USB_ARCH_HAS_OHCI
-	bool
-
 config USB_OHCI_BIG_ENDIAN_DESC
 	bool
 
@@ -17,18 +13,12 @@ config USB_OHCI_LITTLE_ENDIAN
 	default n if STB03xxx || PPC_MPC52xx
 	default y
 
-config USB_ARCH_HAS_EHCI
-	bool
-
 config USB_EHCI_BIG_ENDIAN_MMIO
 	bool
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 
-config USB_ARCH_HAS_XHCI
-	bool
-
 menuconfig USB_SUPPORT
 	bool "USB support"
 	depends on HAS_IOMEM
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 7345d2115af2..480bd4d5710a 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
 # Glue/Bridge layers go here
 
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
+obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
 
 # PCI doesn't provide stubs, need to check
 ifneq ($(CONFIG_PCI),)
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index a85713165688..83d06c1455b7 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -50,12 +50,14 @@
 #define PORTSC_PTC            (0x0FUL << 16)
 #define PORTSC_PHCD(d)	      ((d) ? BIT(22) : BIT(23))
 /* PTS and PTW for non lpm version only */
+#define PORTSC_PFSC           BIT(24)
 #define PORTSC_PTS(d)						\
 	(u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
 #define PORTSC_PTW            BIT(28)
 #define PORTSC_STS            BIT(29)
 
 /* DEVLC */
+#define DEVLC_PFSC            BIT(23)
 #define DEVLC_PSPD            (0x03UL << 25)
 #define DEVLC_PSPD_HS         (0x02UL << 25)
 #define DEVLC_PTW             BIT(27)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 88b80f7728e4..e206406ae1d9 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -196,8 +196,6 @@ struct ci_hdrc {
 
 	struct ci_hdrc_platform_data	*platdata;
 	int				vbus_active;
-	/* FIXME: some day, we'll not use global phy */
-	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 	struct dentry			*debugfs;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index c00f77257d36..2e58f8dfd311 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -96,7 +96,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 {
 	struct ci_hdrc_imx_data *data;
 	struct ci_hdrc_platform_data pdata = {
-		.name		= "ci_hdrc_imx",
+		.name		= dev_name(&pdev->dev),
 		.capoffset	= DEF_CAPOFFSET,
 		.flags		= CI_HDRC_REQUIRE_TRANSCEIVER |
 				  CI_HDRC_DISABLE_STREAMING,
diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
new file mode 100644
index 000000000000..3bf6489ef5ec
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
@@ -0,0 +1,72 @@
+/*
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * Based off drivers/usb/chipidea/ci_hdrc_msm.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+
+static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
+	.name			= "ci_hdrc_zevio",
+	.flags			= CI_HDRC_REGS_SHARED,
+	.capoffset		= DEF_CAPOFFSET,
+};
+
+static int ci_hdrc_zevio_probe(struct platform_device *pdev)
+{
+	struct platform_device *ci_pdev;
+
+	dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n");
+
+	ci_pdev = ci_hdrc_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci_hdrc_zevio_platdata);
+
+	if (IS_ERR(ci_pdev)) {
+		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
+		return PTR_ERR(ci_pdev);
+	}
+
+	platform_set_drvdata(pdev, ci_pdev);
+
+	return 0;
+}
+
+static int ci_hdrc_zevio_remove(struct platform_device *pdev)
+{
+	struct platform_device *ci_pdev = platform_get_drvdata(pdev);
+
+	ci_hdrc_remove_device(ci_pdev);
+
+	return 0;
+}
+
+static const struct of_device_id ci_hdrc_zevio_dt_ids[] = {
+	{ .compatible = "lsi,zevio-usb", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver ci_hdrc_zevio_driver = {
+	.probe = ci_hdrc_zevio_probe,
+	.remove = ci_hdrc_zevio_remove,
+	.driver = {
+		.name = "zevio_usb",
+		.owner = THIS_MODULE,
+		.of_match_table = ci_hdrc_zevio_dt_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids);
+module_platform_driver(ci_hdrc_zevio_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 33f22bc6ad7f..ca6831c5b763 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -64,6 +64,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
 #include <linux/usb/of.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/regulator/consumer.h>
 
@@ -298,6 +299,13 @@ int hw_device_reset(struct ci_hdrc *ci, u32 mode)
 	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
 		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
+		if (ci->hw_bank.lpm)
+			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
+		else
+			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+	}
+
 	/* USBMODE should be configured step by step */
 	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 	hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
@@ -412,6 +420,9 @@ static int ci_get_platdata(struct device *dev,
 		}
 	}
 
+	if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
+		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
+
 	return 0;
 }
 
@@ -496,33 +507,6 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
 	}
 }
 
-static int ci_usb_phy_init(struct ci_hdrc *ci)
-{
-	if (ci->platdata->phy) {
-		ci->transceiver = ci->platdata->phy;
-		return usb_phy_init(ci->transceiver);
-	} else {
-		ci->global_phy = true;
-		ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (IS_ERR(ci->transceiver))
-			ci->transceiver = NULL;
-
-		return 0;
-	}
-}
-
-static void ci_usb_phy_destroy(struct ci_hdrc *ci)
-{
-	if (!ci->transceiver)
-		return;
-
-	otg_set_peripheral(ci->transceiver->otg, NULL);
-	if (ci->global_phy)
-		usb_put_phy(ci->transceiver);
-	else
-		usb_phy_shutdown(ci->transceiver);
-}
-
 static int ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
@@ -532,7 +516,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	int		ret;
 	enum usb_dr_mode dr_mode;
 
-	if (!dev->platform_data) {
+	if (!dev_get_platdata(dev)) {
 		dev_err(dev, "platform data missing\n");
 		return -ENODEV;
 	}
@@ -549,7 +533,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	ci->dev = dev;
-	ci->platdata = dev->platform_data;
+	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
 		CI_HDRC_IMX28_WRITE_FIX);
 
@@ -561,7 +545,26 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 
 	hw_phymode_configure(ci);
 
-	ret = ci_usb_phy_init(ci);
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(ci->transceiver)) {
+		ret = PTR_ERR(ci->transceiver);
+		/*
+		 * if -ENXIO is returned, it means PHY layer wasn't
+		 * enabled, so it makes no sense to return -EPROBE_DEFER
+		 * in that case, since no PHY driver will ever probe.
+		 */
+		if (ret == -ENXIO)
+			return ret;
+
+		dev_err(dev, "no usb2 phy configured\n");
+		return -EPROBE_DEFER;
+	}
+
+	ret = usb_phy_init(ci->transceiver);
 	if (ret) {
 		dev_err(dev, "unable to init phy: %d\n", ret);
 		return ret;
@@ -572,8 +575,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	ci->irq = platform_get_irq(pdev, 0);
 	if (ci->irq < 0) {
 		dev_err(dev, "missing IRQ\n");
-		ret = -ENODEV;
-		goto destroy_phy;
+		ret = ci->irq;
+		goto deinit_phy;
 	}
 
 	ci_get_otg_capable(ci);
@@ -590,23 +593,12 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		ret = ci_hdrc_gadget_init(ci);
 		if (ret)
 			dev_info(dev, "doesn't support gadget\n");
-		if (!ret && ci->transceiver) {
-			ret = otg_set_peripheral(ci->transceiver->otg,
-							&ci->gadget);
-			/*
-			 * If we implement all USB functions using chipidea drivers,
-			 * it doesn't need to call above API, meanwhile, if we only
-			 * use gadget function, calling above API is useless.
-			 */
-			if (ret && ret != -ENOTSUPP)
-				goto destroy_phy;
-		}
 	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
 		ret = -ENODEV;
-		goto destroy_phy;
+		goto deinit_phy;
 	}
 
 	if (ci->is_otg) {
@@ -663,8 +655,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	free_irq(ci->irq, ci);
 stop:
 	ci_role_destroy(ci);
-destroy_phy:
-	ci_usb_phy_destroy(ci);
+deinit_phy:
+	usb_phy_shutdown(ci->transceiver);
 
 	return ret;
 }
@@ -677,7 +669,8 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	free_irq(ci->irq, ci);
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
-	ci_usb_phy_destroy(ci);
+	usb_phy_shutdown(ci->transceiver);
+	kfree(ci->hw_bank.regmap);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 4ab2cb62dfce..7739c64ef259 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -178,19 +178,6 @@ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
 }
 
 /**
- * hw_test_and_clear_setup_status: test & clear setup status (execute without
- *                                 interruption)
- * @n: endpoint number
- *
- * This function returns setup status
- */
-static int hw_test_and_clear_setup_status(struct ci_hdrc *ci, int n)
-{
-	n = ep_to_bit(ci, n);
-	return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
-}
-
-/**
  * hw_ep_prime: primes endpoint (execute without interruption)
  * @num:     endpoint number
  * @dir:     endpoint direction
@@ -962,6 +949,156 @@ __acquires(hwep->lock)
 }
 
 /**
+ * isr_setup_packet_handler: setup packet handler
+ * @ci: UDC descriptor
+ *
+ * This function handles setup packet 
+ */
+static void isr_setup_packet_handler(struct ci_hdrc *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
+{
+	struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
+	struct usb_ctrlrequest req;
+	int type, num, dir, err = -EINVAL;
+	u8 tmode = 0;
+
+	/*
+	 * Flush data and handshake transactions of previous
+	 * setup packet.
+	 */
+	_ep_nuke(ci->ep0out);
+	_ep_nuke(ci->ep0in);
+
+	/* read_setup_packet */
+	do {
+		hw_test_and_set_setup_guard(ci);
+		memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
+	} while (!hw_test_and_clear_setup_guard(ci));
+
+	type = req.bRequestType;
+
+	ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+
+	switch (req.bRequest) {
+	case USB_REQ_CLEAR_FEATURE:
+		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+				le16_to_cpu(req.wValue) ==
+				USB_ENDPOINT_HALT) {
+			if (req.wLength != 0)
+				break;
+			num  = le16_to_cpu(req.wIndex);
+			dir = num & USB_ENDPOINT_DIR_MASK;
+			num &= USB_ENDPOINT_NUMBER_MASK;
+			if (dir) /* TX */
+				num += ci->hw_ep_max / 2;
+			if (!ci->ci_hw_ep[num].wedge) {
+				spin_unlock(&ci->lock);
+				err = usb_ep_clear_halt(
+					&ci->ci_hw_ep[num].ep);
+				spin_lock(&ci->lock);
+				if (err)
+					break;
+			}
+			err = isr_setup_status_phase(ci);
+		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
+				le16_to_cpu(req.wValue) ==
+				USB_DEVICE_REMOTE_WAKEUP) {
+			if (req.wLength != 0)
+				break;
+			ci->remote_wakeup = 0;
+			err = isr_setup_status_phase(ci);
+		} else {
+			goto delegate;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
+		    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
+		    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
+			goto delegate;
+		if (le16_to_cpu(req.wLength) != 2 ||
+		    le16_to_cpu(req.wValue)  != 0)
+			break;
+		err = isr_get_status_response(ci, &req);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
+			goto delegate;
+		if (le16_to_cpu(req.wLength) != 0 ||
+		    le16_to_cpu(req.wIndex)  != 0)
+			break;
+		ci->address = (u8)le16_to_cpu(req.wValue);
+		ci->setaddr = true;
+		err = isr_setup_status_phase(ci);
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+				le16_to_cpu(req.wValue) ==
+				USB_ENDPOINT_HALT) {
+			if (req.wLength != 0)
+				break;
+			num  = le16_to_cpu(req.wIndex);
+			dir = num & USB_ENDPOINT_DIR_MASK;
+			num &= USB_ENDPOINT_NUMBER_MASK;
+			if (dir) /* TX */
+				num += ci->hw_ep_max / 2;
+
+			spin_unlock(&ci->lock);
+			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+			spin_lock(&ci->lock);
+			if (!err)
+				isr_setup_status_phase(ci);
+		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
+			if (req.wLength != 0)
+				break;
+			switch (le16_to_cpu(req.wValue)) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				ci->remote_wakeup = 1;
+				err = isr_setup_status_phase(ci);
+				break;
+			case USB_DEVICE_TEST_MODE:
+				tmode = le16_to_cpu(req.wIndex) >> 8;
+				switch (tmode) {
+				case TEST_J:
+				case TEST_K:
+				case TEST_SE0_NAK:
+				case TEST_PACKET:
+				case TEST_FORCE_EN:
+					ci->test_mode = tmode;
+					err = isr_setup_status_phase(
+							ci);
+					break;
+				default:
+					break;
+				}
+			default:
+				goto delegate;
+			}
+		} else {
+			goto delegate;
+		}
+		break;
+	default:
+delegate:
+		if (req.wLength == 0)   /* no data phase */
+			ci->ep0_dir = TX;
+
+		spin_unlock(&ci->lock);
+		err = ci->driver->setup(&ci->gadget, &req);
+		spin_lock(&ci->lock);
+		break;
+	}
+
+	if (err < 0) {
+		spin_unlock(&ci->lock);
+		if (usb_ep_set_halt(&hwep->ep))
+			dev_err(ci->dev, "error: ep_set_halt\n");
+		spin_lock(&ci->lock);
+	}
+}
+
+/**
  * isr_tr_complete_handler: transaction complete interrupt handler
  * @ci: UDC descriptor
  *
@@ -972,12 +1109,10 @@ __releases(ci->lock)
 __acquires(ci->lock)
 {
 	unsigned i;
-	u8 tmode = 0;
+	int err;
 
 	for (i = 0; i < ci->hw_ep_max; i++) {
 		struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i];
-		int type, num, dir, err = -EINVAL;
-		struct usb_ctrlrequest req;
 
 		if (hwep->ep.desc == NULL)
 			continue;   /* not configured */
@@ -997,148 +1132,10 @@ __acquires(ci->lock)
 			}
 		}
 
-		if (hwep->type != USB_ENDPOINT_XFER_CONTROL ||
-		    !hw_test_and_clear_setup_status(ci, i))
-			continue;
-
-		if (i != 0) {
-			dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
-			continue;
-		}
-
-		/*
-		 * Flush data and handshake transactions of previous
-		 * setup packet.
-		 */
-		_ep_nuke(ci->ep0out);
-		_ep_nuke(ci->ep0in);
-
-		/* read_setup_packet */
-		do {
-			hw_test_and_set_setup_guard(ci);
-			memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
-		} while (!hw_test_and_clear_setup_guard(ci));
-
-		type = req.bRequestType;
-
-		ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
-
-		switch (req.bRequest) {
-		case USB_REQ_CLEAR_FEATURE:
-			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-					le16_to_cpu(req.wValue) ==
-					USB_ENDPOINT_HALT) {
-				if (req.wLength != 0)
-					break;
-				num  = le16_to_cpu(req.wIndex);
-				dir = num & USB_ENDPOINT_DIR_MASK;
-				num &= USB_ENDPOINT_NUMBER_MASK;
-				if (dir) /* TX */
-					num += ci->hw_ep_max/2;
-				if (!ci->ci_hw_ep[num].wedge) {
-					spin_unlock(&ci->lock);
-					err = usb_ep_clear_halt(
-						&ci->ci_hw_ep[num].ep);
-					spin_lock(&ci->lock);
-					if (err)
-						break;
-				}
-				err = isr_setup_status_phase(ci);
-			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
-					le16_to_cpu(req.wValue) ==
-					USB_DEVICE_REMOTE_WAKEUP) {
-				if (req.wLength != 0)
-					break;
-				ci->remote_wakeup = 0;
-				err = isr_setup_status_phase(ci);
-			} else {
-				goto delegate;
-			}
-			break;
-		case USB_REQ_GET_STATUS:
-			if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
-			    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
-			    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
-				goto delegate;
-			if (le16_to_cpu(req.wLength) != 2 ||
-			    le16_to_cpu(req.wValue)  != 0)
-				break;
-			err = isr_get_status_response(ci, &req);
-			break;
-		case USB_REQ_SET_ADDRESS:
-			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
-				goto delegate;
-			if (le16_to_cpu(req.wLength) != 0 ||
-			    le16_to_cpu(req.wIndex)  != 0)
-				break;
-			ci->address = (u8)le16_to_cpu(req.wValue);
-			ci->setaddr = true;
-			err = isr_setup_status_phase(ci);
-			break;
-		case USB_REQ_SET_FEATURE:
-			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-					le16_to_cpu(req.wValue) ==
-					USB_ENDPOINT_HALT) {
-				if (req.wLength != 0)
-					break;
-				num  = le16_to_cpu(req.wIndex);
-				dir = num & USB_ENDPOINT_DIR_MASK;
-				num &= USB_ENDPOINT_NUMBER_MASK;
-				if (dir) /* TX */
-					num += ci->hw_ep_max/2;
-
-				spin_unlock(&ci->lock);
-				err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
-				spin_lock(&ci->lock);
-				if (!err)
-					isr_setup_status_phase(ci);
-			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
-				if (req.wLength != 0)
-					break;
-				switch (le16_to_cpu(req.wValue)) {
-				case USB_DEVICE_REMOTE_WAKEUP:
-					ci->remote_wakeup = 1;
-					err = isr_setup_status_phase(ci);
-					break;
-				case USB_DEVICE_TEST_MODE:
-					tmode = le16_to_cpu(req.wIndex) >> 8;
-					switch (tmode) {
-					case TEST_J:
-					case TEST_K:
-					case TEST_SE0_NAK:
-					case TEST_PACKET:
-					case TEST_FORCE_EN:
-						ci->test_mode = tmode;
-						err = isr_setup_status_phase(
-								ci);
-						break;
-					default:
-						break;
-					}
-				default:
-					goto delegate;
-				}
-			} else {
-				goto delegate;
-			}
-			break;
-		default:
-delegate:
-			if (req.wLength == 0)   /* no data phase */
-				ci->ep0_dir = TX;
-
-			spin_unlock(&ci->lock);
-			err = ci->driver->setup(&ci->gadget, &req);
-			spin_lock(&ci->lock);
-			break;
-		}
-
-		if (err < 0) {
-			spin_unlock(&ci->lock);
-			if (usb_ep_set_halt(&hwep->ep))
-				dev_err(ci->dev, "error: ep_set_halt\n");
-			spin_lock(&ci->lock);
-		}
+		/* Only handle setup packet below */
+		if (i == 0 &&
+			hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
+			isr_setup_packet_handler(ci);
 	}
 }
 
@@ -1193,6 +1190,11 @@ static int ep_enable(struct usb_ep *ep,
 
 	hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
 
+	if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
+		dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
+		retval = -EINVAL;
+	}
+
 	/*
 	 * Enable endpoints in the HW other than ep0 as ep0
 	 * is always enabled
@@ -1837,12 +1839,6 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 
 	dma_pool_destroy(ci->td_pool);
 	dma_pool_destroy(ci->qh_pool);
-
-	if (ci->transceiver) {
-		otg_set_peripheral(ci->transceiver->otg, NULL);
-		if (ci->global_phy)
-			usb_put_phy(ci->transceiver);
-	}
 }
 
 static int udc_id_switch_for_device(struct ci_hdrc *ci)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 062967c90b2a..1ab4df1de2da 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -10,7 +10,6 @@
 
 
 #define USB_MAXALTSETTING		128	/* Hard limit */
-#define USB_MAXENDPOINTS		30	/* Hard limit */
 
 #define USB_MAXCONFIG			8	/* Arbitrary limit */
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 2a8afe6754b8..257876ea03a1 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -769,6 +769,88 @@ static int check_ctrlrecip(struct usb_dev_state *ps, unsigned int requesttype,
 	return ret;
 }
 
+static struct usb_host_endpoint *ep_to_host_endpoint(struct usb_device *dev,
+						     unsigned char ep)
+{
+	if (ep & USB_ENDPOINT_DIR_MASK)
+		return dev->ep_in[ep & USB_ENDPOINT_NUMBER_MASK];
+	else
+		return dev->ep_out[ep & USB_ENDPOINT_NUMBER_MASK];
+}
+
+static int parse_usbdevfs_streams(struct usb_dev_state *ps,
+				  struct usbdevfs_streams __user *streams,
+				  unsigned int *num_streams_ret,
+				  unsigned int *num_eps_ret,
+				  struct usb_host_endpoint ***eps_ret,
+				  struct usb_interface **intf_ret)
+{
+	unsigned int i, num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf = NULL;
+	unsigned char ep;
+	int ifnum, ret;
+
+	if (get_user(num_streams, &streams->num_streams) ||
+	    get_user(num_eps, &streams->num_eps))
+		return -EFAULT;
+
+	if (num_eps < 1 || num_eps > USB_MAXENDPOINTS)
+		return -EINVAL;
+
+	/* The XHCI controller allows max 2 ^ 16 streams */
+	if (num_streams_ret && (num_streams < 2 || num_streams > 65536))
+		return -EINVAL;
+
+	eps = kmalloc(num_eps * sizeof(*eps), GFP_KERNEL);
+	if (!eps)
+		return -ENOMEM;
+
+	for (i = 0; i < num_eps; i++) {
+		if (get_user(ep, &streams->eps[i])) {
+			ret = -EFAULT;
+			goto error;
+		}
+		eps[i] = ep_to_host_endpoint(ps->dev, ep);
+		if (!eps[i]) {
+			ret = -EINVAL;
+			goto error;
+		}
+
+		/* usb_alloc/free_streams operate on an usb_interface */
+		ifnum = findintfep(ps->dev, ep);
+		if (ifnum < 0) {
+			ret = ifnum;
+			goto error;
+		}
+
+		if (i == 0) {
+			ret = checkintf(ps, ifnum);
+			if (ret < 0)
+				goto error;
+			intf = usb_ifnum_to_if(ps->dev, ifnum);
+		} else {
+			/* Verify all eps belong to the same interface */
+			if (ifnum != intf->altsetting->desc.bInterfaceNumber) {
+				ret = -EINVAL;
+				goto error;
+			}
+		}
+	}
+
+	if (num_streams_ret)
+		*num_streams_ret = num_streams;
+	*num_eps_ret = num_eps;
+	*eps_ret = eps;
+	*intf_ret = intf;
+
+	return 0;
+
+error:
+	kfree(eps);
+	return ret;
+}
+
 static int match_devt(struct device *dev, void *data)
 {
 	return dev->devt == (dev_t) (unsigned long) data;
@@ -1043,6 +1125,20 @@ static int proc_bulk(struct usb_dev_state *ps, void __user *arg)
 	return ret;
 }
 
+static void check_reset_of_active_ep(struct usb_device *udev,
+		unsigned int epnum, char *ioctl_name)
+{
+	struct usb_host_endpoint **eps;
+	struct usb_host_endpoint *ep;
+
+	eps = (epnum & USB_DIR_IN) ? udev->ep_in : udev->ep_out;
+	ep = eps[epnum & 0x0f];
+	if (ep && !list_empty(&ep->urb_list))
+		dev_warn(&udev->dev, "Process %d (%s) called USBDEVFS_%s for active endpoint 0x%02x\n",
+				task_pid_nr(current), current->comm,
+				ioctl_name, epnum);
+}
+
 static int proc_resetep(struct usb_dev_state *ps, void __user *arg)
 {
 	unsigned int ep;
@@ -1056,6 +1152,7 @@ static int proc_resetep(struct usb_dev_state *ps, void __user *arg)
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "RESETEP");
 	usb_reset_endpoint(ps->dev, ep);
 	return 0;
 }
@@ -1074,6 +1171,7 @@ static int proc_clearhalt(struct usb_dev_state *ps, void __user *arg)
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "CLEAR_HALT");
 	if (ep & USB_DIR_IN)
 		pipe = usb_rcvbulkpipe(ps->dev, ep & 0x7f);
 	else
@@ -1127,6 +1225,9 @@ static int proc_setintf(struct usb_dev_state *ps, void __user *arg)
 		return -EFAULT;
 	if ((ret = checkintf(ps, setintf.interface)))
 		return ret;
+
+	destroy_async_on_interface(ps, setintf.interface);
+
 	return usb_set_interface(ps->dev, setintf.interface,
 			setintf.altsetting);
 }
@@ -1189,6 +1290,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 	struct usb_ctrlrequest *dr = NULL;
 	unsigned int u, totlen, isofrmlen;
 	int i, ret, is_in, num_sgs = 0, ifnum = -1;
+	int number_of_packets = 0;
+	unsigned int stream_id = 0;
 	void *buf;
 
 	if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP |
@@ -1209,15 +1312,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 		if (ret)
 			return ret;
 	}
-	if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0) {
-		is_in = 1;
-		ep = ps->dev->ep_in[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
-	} else {
-		is_in = 0;
-		ep = ps->dev->ep_out[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK];
-	}
+	ep = ep_to_host_endpoint(ps->dev, uurb->endpoint);
 	if (!ep)
 		return -ENOENT;
+	is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0;
 
 	u = 0;
 	switch(uurb->type) {
@@ -1242,7 +1340,6 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 				      le16_to_cpup(&dr->wIndex));
 		if (ret)
 			goto error;
-		uurb->number_of_packets = 0;
 		uurb->buffer_length = le16_to_cpup(&dr->wLength);
 		uurb->buffer += 8;
 		if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) {
@@ -1272,17 +1369,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 			uurb->type = USBDEVFS_URB_TYPE_INTERRUPT;
 			goto interrupt_urb;
 		}
-		uurb->number_of_packets = 0;
 		num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);
 		if (num_sgs == 1 || num_sgs > ps->dev->bus->sg_tablesize)
 			num_sgs = 0;
+		if (ep->streams)
+			stream_id = uurb->stream_id;
 		break;
 
 	case USBDEVFS_URB_TYPE_INTERRUPT:
 		if (!usb_endpoint_xfer_int(&ep->desc))
 			return -EINVAL;
  interrupt_urb:
-		uurb->number_of_packets = 0;
 		break;
 
 	case USBDEVFS_URB_TYPE_ISO:
@@ -1292,15 +1389,16 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 			return -EINVAL;
 		if (!usb_endpoint_xfer_isoc(&ep->desc))
 			return -EINVAL;
+		number_of_packets = uurb->number_of_packets;
 		isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) *
-				   uurb->number_of_packets;
+				   number_of_packets;
 		if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
 			return -ENOMEM;
 		if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
 			ret = -EFAULT;
 			goto error;
 		}
-		for (totlen = u = 0; u < uurb->number_of_packets; u++) {
+		for (totlen = u = 0; u < number_of_packets; u++) {
 			/*
 			 * arbitrary limit need for USB 3.0
 			 * bMaxBurst (0~15 allowed, 1~16 packets)
@@ -1331,7 +1429,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 		ret = -EFAULT;
 		goto error;
 	}
-	as = alloc_async(uurb->number_of_packets);
+	as = alloc_async(number_of_packets);
 	if (!as) {
 		ret = -ENOMEM;
 		goto error;
@@ -1425,7 +1523,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 	as->urb->setup_packet = (unsigned char *)dr;
 	dr = NULL;
 	as->urb->start_frame = uurb->start_frame;
-	as->urb->number_of_packets = uurb->number_of_packets;
+	as->urb->number_of_packets = number_of_packets;
+	as->urb->stream_id = stream_id;
 	if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
 			ps->dev->speed == USB_SPEED_HIGH)
 		as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
@@ -1433,7 +1532,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 		as->urb->interval = ep->desc.bInterval;
 	as->urb->context = as;
 	as->urb->complete = async_completed;
-	for (totlen = u = 0; u < uurb->number_of_packets; u++) {
+	for (totlen = u = 0; u < number_of_packets; u++) {
 		as->urb->iso_frame_desc[u].offset = totlen;
 		as->urb->iso_frame_desc[u].length = isopkt[u].length;
 		totlen += isopkt[u].length;
@@ -1983,6 +2082,45 @@ static int proc_disconnect_claim(struct usb_dev_state *ps, void __user *arg)
 	return claimintf(ps, dc.interface);
 }
 
+static int proc_alloc_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, &num_streams, &num_eps,
+				   &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_alloc_streams(intf, eps, num_eps, num_streams, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
+static int proc_free_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, NULL, &num_eps, &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_free_streams(intf, eps, num_eps, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
 /*
  * NOTE:  All requests here that have interface numbers as parameters
  * are assuming that somehow the configuration has been prevented from
@@ -2159,6 +2297,12 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
 	case USBDEVFS_DISCONNECT_CLAIM:
 		ret = proc_disconnect_claim(ps, p);
 		break;
+	case USBDEVFS_ALLOC_STREAMS:
+		ret = proc_alloc_streams(ps, p);
+		break;
+	case USBDEVFS_FREE_STREAMS:
+		ret = proc_free_streams(ps, p);
+		break;
 	}
 	usb_unlock_device(dev);
 	if (ret >= 0)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ab90a0156828..888881e5f292 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -312,9 +312,9 @@ static int usb_probe_interface(struct device *dev)
 		return error;
 	}
 
-	id = usb_match_id(intf, driver->id_table);
+	id = usb_match_dynamic_id(intf, driver);
 	if (!id)
-		id = usb_match_dynamic_id(intf, driver);
+		id = usb_match_id(intf, driver->id_table);
 	if (!id)
 		return error;
 
@@ -400,8 +400,9 @@ static int usb_unbind_interface(struct device *dev)
 {
 	struct usb_driver *driver = to_usb_driver(dev->driver);
 	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_host_endpoint *ep, **eps = NULL;
 	struct usb_device *udev;
-	int error, r, lpm_disable_error;
+	int i, j, error, r, lpm_disable_error;
 
 	intf->condition = USB_INTERFACE_UNBINDING;
 
@@ -425,6 +426,26 @@ static int usb_unbind_interface(struct device *dev)
 	driver->disconnect(intf);
 	usb_cancel_queued_reset(intf);
 
+	/* Free streams */
+	for (i = 0, j = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep = &intf->cur_altsetting->endpoint[i];
+		if (ep->streams == 0)
+			continue;
+		if (j == 0) {
+			eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *),
+				      GFP_KERNEL);
+			if (!eps) {
+				dev_warn(dev, "oom, leaking streams\n");
+				break;
+			}
+		}
+		eps[j++] = ep;
+	}
+	if (j) {
+		usb_free_streams(intf, eps, j, GFP_KERNEL);
+		kfree(eps);
+	}
+
 	/* Reset other interface state.
 	 * We cannot do a Set-Interface if the device is suspended or
 	 * if it is prepared for a system sleep (since installing a new
@@ -990,8 +1011,7 @@ EXPORT_SYMBOL_GPL(usb_deregister);
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
  *
- * The caller must hold @intf's device's lock, but not its pm_mutex
- * and not @intf->dev.sem.
+ * The caller must hold @intf's device's lock, but not @intf's lock.
  */
 void usb_forced_unbind_intf(struct usb_interface *intf)
 {
@@ -1004,16 +1024,37 @@ void usb_forced_unbind_intf(struct usb_interface *intf)
 	intf->needs_binding = 1;
 }
 
+/*
+ * Unbind drivers for @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set, for example by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->dev.driver && intf->needs_binding)
+				usb_forced_unbind_intf(intf);
+		}
+	}
+}
+
 /* Delayed forced unbinding of a USB interface driver and scan
  * for rebinding.
  *
- * The caller must hold @intf's device's lock, but not its pm_mutex
- * and not @intf->dev.sem.
+ * The caller must hold @intf's device's lock, but not @intf's lock.
  *
  * Note: Rebinds will be skipped if a system sleep transition is in
  * progress and the PM "complete" callback hasn't occurred yet.
  */
-void usb_rebind_intf(struct usb_interface *intf)
+static void usb_rebind_intf(struct usb_interface *intf)
 {
 	int rc;
 
@@ -1030,68 +1071,66 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 }
 
-#ifdef CONFIG_PM
-
-/* Unbind drivers for @udev's interfaces that don't support suspend/resume
- * There is no check for reset_resume here because it can be determined
- * only during resume whether reset_resume is needed.
+/*
+ * Rebind drivers to @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set.
  *
  * The caller must hold @udev's device lock.
  */
-static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
+static void rebind_marked_interfaces(struct usb_device *udev)
 {
 	struct usb_host_config	*config;
 	int			i;
 	struct usb_interface	*intf;
-	struct usb_driver	*drv;
 
 	config = udev->actconfig;
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			intf = config->interface[i];
-
-			if (intf->dev.driver) {
-				drv = to_usb_driver(intf->dev.driver);
-				if (!drv->suspend || !drv->resume)
-					usb_forced_unbind_intf(intf);
-			}
+			if (intf->needs_binding)
+				usb_rebind_intf(intf);
 		}
 	}
 }
 
-/* Unbind drivers for @udev's interfaces that failed to support reset-resume.
- * These interfaces have the needs_binding flag set by usb_resume_interface().
+/*
+ * Unbind all of @udev's marked interfaces and then rebind all of them.
+ * This ordering is necessary because some drivers claim several interfaces
+ * when they are first probed.
  *
  * The caller must hold @udev's device lock.
  */
-static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev)
+void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev)
 {
-	struct usb_host_config	*config;
-	int			i;
-	struct usb_interface	*intf;
-
-	config = udev->actconfig;
-	if (config) {
-		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
-			intf = config->interface[i];
-			if (intf->dev.driver && intf->needs_binding)
-				usb_forced_unbind_intf(intf);
-		}
-	}
+	unbind_marked_interfaces(udev);
+	rebind_marked_interfaces(udev);
 }
 
-static void do_rebind_interfaces(struct usb_device *udev)
+#ifdef CONFIG_PM
+
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
 {
 	struct usb_host_config	*config;
 	int			i;
 	struct usb_interface	*intf;
+	struct usb_driver	*drv;
 
 	config = udev->actconfig;
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			intf = config->interface[i];
-			if (intf->needs_binding)
-				usb_rebind_intf(intf);
+
+			if (intf->dev.driver) {
+				drv = to_usb_driver(intf->dev.driver);
+				if (!drv->suspend || !drv->resume)
+					usb_forced_unbind_intf(intf);
+			}
 		}
 	}
 }
@@ -1420,7 +1459,7 @@ int usb_resume_complete(struct device *dev)
 	 * whose needs_binding flag is set
 	 */
 	if (udev->state != USB_STATE_NOTATTACHED)
-		do_rebind_interfaces(udev);
+		rebind_marked_interfaces(udev);
 	return 0;
 }
 
@@ -1442,7 +1481,7 @@ int usb_resume(struct device *dev, pm_message_t msg)
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
-		unbind_no_reset_resume_drivers_interfaces(udev);
+		unbind_marked_interfaces(udev);
 	}
 
 	/* Avoid PM error messages for devices disconnected while suspended
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 2518c3250750..9c4e2922b04d 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2049,7 +2049,7 @@ int usb_alloc_streams(struct usb_interface *interface,
 {
 	struct usb_hcd *hcd;
 	struct usb_device *dev;
-	int i;
+	int i, ret;
 
 	dev = interface_to_usbdev(interface);
 	hcd = bus_to_hcd(dev->bus);
@@ -2058,13 +2058,24 @@ int usb_alloc_streams(struct usb_interface *interface,
 	if (dev->speed != USB_SPEED_SUPER)
 		return -EINVAL;
 
-	/* Streams only apply to bulk endpoints. */
-	for (i = 0; i < num_eps; i++)
+	for (i = 0; i < num_eps; i++) {
+		/* Streams only apply to bulk endpoints. */
 		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
 			return -EINVAL;
+		/* Re-alloc is not allowed */
+		if (eps[i]->streams)
+			return -EINVAL;
+	}
 
-	return hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
+	ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
 			num_streams, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = ret;
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_alloc_streams);
 
@@ -2078,8 +2089,7 @@ EXPORT_SYMBOL_GPL(usb_alloc_streams);
  * Reverts a group of bulk endpoints back to not using stream IDs.
  * Can fail if we are given bad arguments, or HCD is broken.
  *
- * Return: On success, the number of allocated streams. On failure, a negative
- * error code.
+ * Return: 0 on success. On failure, a negative error code.
  */
 int usb_free_streams(struct usb_interface *interface,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
@@ -2087,19 +2097,26 @@ int usb_free_streams(struct usb_interface *interface,
 {
 	struct usb_hcd *hcd;
 	struct usb_device *dev;
-	int i;
+	int i, ret;
 
 	dev = interface_to_usbdev(interface);
 	hcd = bus_to_hcd(dev->bus);
 	if (dev->speed != USB_SPEED_SUPER)
 		return -EINVAL;
 
-	/* Streams only apply to bulk endpoints. */
+	/* Double-free is not allowed */
 	for (i = 0; i < num_eps; i++)
-		if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
+		if (!eps[i] || !eps[i]->streams)
 			return -EINVAL;
 
-	return hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+	ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = 0;
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_free_streams);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 610735823d93..090469ebfcff 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -141,19 +141,27 @@ static int usb_device_supports_lpm(struct usb_device *udev)
 		return 0;
 	}
 
-	/* All USB 3.0 must support LPM, but we need their max exit latency
-	 * information from the SuperSpeed Extended Capabilities BOS descriptor.
+	/*
+	 * According to the USB 3.0 spec, all USB 3.0 devices must support LPM.
+	 * However, there are some that don't, and they set the U1/U2 exit
+	 * latencies to zero.
 	 */
 	if (!udev->bos->ss_cap) {
-		dev_warn(&udev->dev, "No LPM exit latency info found.  "
-				"Power management will be impacted.\n");
+		dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n");
+		return 0;
+	}
+
+	if (udev->bos->ss_cap->bU1devExitLat == 0 &&
+			udev->bos->ss_cap->bU2DevExitLat == 0) {
+		if (udev->parent)
+			dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n");
+		else
+			dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n");
 		return 0;
 	}
-	if (udev->parent->lpm_capable)
-		return 1;
 
-	dev_warn(&udev->dev, "Parent hub missing LPM exit latency info.  "
-			"Power management will be impacted.\n");
+	if (!udev->parent || udev->parent->lpm_capable)
+		return 1;
 	return 0;
 }
 
@@ -499,7 +507,8 @@ static void led_work (struct work_struct *work)
 		changed++;
 	}
 	if (changed)
-		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
 }
 
 /* use a short timeout for hub/port status fetches */
@@ -1041,7 +1050,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		if (type == HUB_INIT) {
 			delay = hub_power_on(hub, false);
 			INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
-			schedule_delayed_work(&hub->init_work,
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
 					msecs_to_jiffies(delay));
 
 			/* Suppress autosuspend until init is done */
@@ -1195,7 +1205,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		/* Don't do a long sleep inside a workqueue routine */
 		if (type == HUB_INIT2) {
 			INIT_DELAYED_WORK(&hub->init_work, hub_init_func3);
-			schedule_delayed_work(&hub->init_work,
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
 					msecs_to_jiffies(delay));
 			return;		/* Continues at init3: below */
 		} else {
@@ -1209,7 +1220,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	if (status < 0)
 		dev_err(hub->intfdev, "activate --> %d\n", status);
 	if (hub->has_indicators && blinkenlights)
-		schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD);
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
 
 	/* Scan all ports that need attention */
 	kick_khubd(hub);
@@ -3095,9 +3107,19 @@ static int finish_port_resume(struct usb_device *udev)
 	 * operation is carried out here, after the port has been
 	 * resumed.
 	 */
-	if (udev->reset_resume)
+	if (udev->reset_resume) {
+		/*
+		 * If the device morphs or switches modes when it is reset,
+		 * we don't want to perform a reset-resume.  We'll fail the
+		 * resume, which will cause a logical disconnect, and then
+		 * the device will be rediscovered.
+		 */
  retry_reset_resume:
-		status = usb_reset_and_verify_device(udev);
+		if (udev->quirks & USB_QUIRK_RESET)
+			status = -ENODEV;
+		else
+			status = usb_reset_and_verify_device(udev);
+	}
 
 	/* 10.5.4.5 says be sure devices in the tree are still there.
 	 * For now let's assume the device didn't go crazy on resume,
@@ -3960,7 +3982,7 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
 	connect_type = usb_get_hub_port_connect_type(udev->parent,
 			udev->portnum);
 
-	if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) ||
+	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
 			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
 		udev->usb2_hw_lpm_allowed = 1;
 		usb_set_usb2_hardware_lpm(udev, 1);
@@ -4109,8 +4131,12 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 			did_new_scheme = true;
 			retval = hub_enable_device(udev);
-			if (retval < 0)
+			if (retval < 0) {
+				dev_err(&udev->dev,
+					"hub failed to enable device, error %d\n",
+					retval);
 				goto fail;
+			}
 
 #define GET_DESCRIPTOR_BUFSIZE	64
 			buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
@@ -4313,7 +4339,8 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 		/* hub LEDs are probably harder to miss than syslog */
 		if (hub->has_indicators) {
 			hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
-			schedule_delayed_work (&hub->leds, 0);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->leds, 0);
 		}
 	}
 	kfree(qual);
@@ -4542,7 +4569,9 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				if (hub->has_indicators) {
 					hub->indicator[port1-1] =
 						INDICATOR_AMBER_BLINK;
-					schedule_delayed_work (&hub->leds, 0);
+					queue_delayed_work(
+						system_power_efficient_wq,
+						&hub->leds, 0);
 				}
 				status = -ENOTCONN;	/* Don't retry */
 				goto loop_disable;
@@ -4741,6 +4770,8 @@ static void hub_events(void)
 
 		/* deal with port status changes */
 		for (i = 1; i <= hdev->maxchild; i++) {
+			struct usb_device *udev = hub->ports[i - 1]->child;
+
 			if (test_bit(i, hub->busy_bits))
 				continue;
 			connect_change = test_bit(i, hub->change_bits);
@@ -4839,8 +4870,6 @@ static void hub_events(void)
 			 */
 			if (hub_port_warm_reset_required(hub, portstatus)) {
 				int status;
-				struct usb_device *udev =
-					hub->ports[i - 1]->child;
 
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
 				if (!udev ||
@@ -4857,6 +4886,24 @@ static void hub_events(void)
 					usb_unlock_device(udev);
 					connect_change = 0;
 				}
+			/*
+			 * On disconnect USB3 protocol ports transit from U0 to
+			 * SS.Inactive to Rx.Detect. If this happens a warm-
+			 * reset is not needed, but a (re)connect may happen
+			 * before khubd runs and sees the disconnect, and the
+			 * device may be an unknown state.
+			 *
+			 * If the port went through SS.Inactive without khubd
+			 * seeing it the C_LINK_STATE change flag will be set,
+			 * and we reset the dev to put it in a known state.
+			 */
+			} else if (udev && hub_is_superspeed(hub->hdev) &&
+				   (portchange & USB_PORT_STAT_C_LINK_STATE) &&
+				   (portstatus & USB_PORT_STAT_CONNECTION)) {
+				usb_lock_device(udev);
+				usb_reset_device(udev);
+				usb_unlock_device(udev);
+				connect_change = 0;
 			}
 
 			if (connect_change)
@@ -5114,7 +5161,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	struct usb_hcd			*hcd = bus_to_hcd(udev->bus);
 	struct usb_device_descriptor	descriptor = udev->descriptor;
 	struct usb_host_bos		*bos;
-	int 				i, ret = 0;
+	int				i, j, ret = 0;
 	int				port1 = udev->portnum;
 
 	if (udev->state == USB_STATE_NOTATTACHED ||
@@ -5240,6 +5287,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 				ret);
 			goto re_enumerate;
 		}
+		/* Resetting also frees any allocated streams */
+		for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++)
+			intf->cur_altsetting->endpoint[j].streams = 0;
 	}
 
 done:
@@ -5342,10 +5392,11 @@ int usb_reset_device(struct usb_device *udev)
 				else if (cintf->condition ==
 						USB_INTERFACE_BOUND)
 					rebind = 1;
+				if (rebind)
+					cintf->needs_binding = 1;
 			}
-			if (ret == 0 && rebind)
-				usb_rebind_intf(cintf);
 		}
+		usb_unbind_and_rebind_marked_interfaces(udev);
 	}
 
 	usb_autosuspend_device(udev);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 08d95e9d56c2..3cdcd0a2c0b7 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1293,8 +1293,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	struct usb_interface *iface;
 	struct usb_host_interface *alt;
 	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
-	int ret;
-	int manual = 0;
+	int i, ret, manual = 0;
 	unsigned int epaddr;
 	unsigned int pipe;
 
@@ -1329,6 +1328,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 		mutex_unlock(hcd->bandwidth_mutex);
 		return -ENOMEM;
 	}
+	/* Changing alt-setting also frees any allocated streams */
+	for (i = 0; i < iface->cur_altsetting->desc.bNumEndpoints; i++)
+		iface->cur_altsetting->endpoint[i].streams = 0;
+
 	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
 	if (ret < 0) {
 		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index a87532845bf9..75bf649da82d 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -55,7 +55,7 @@ extern int usb_match_one_id_intf(struct usb_device *dev,
 extern int usb_match_device(struct usb_device *dev,
 			    const struct usb_device_id *id);
 extern void usb_forced_unbind_intf(struct usb_interface *intf);
-extern void usb_rebind_intf(struct usb_interface *intf);
+extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev);
 
 extern void usb_hub_release_all_ports(struct usb_device *hdev,
 		struct usb_dev_state *owner);
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 8205799e6db3..c93918b70d03 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -72,6 +72,26 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
 }
 
 /**
+ * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
+ * When the PRTINT interrupt fires, there are certain status bits in the Host
+ * Port that needs to get cleared.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = readl(hsotg->regs + HPRT0);
+
+	if (hprt0 & HPRT0_ENACHG) {
+		hprt0 &= ~HPRT0_ENA;
+		writel(hprt0, hsotg->regs + HPRT0);
+	}
+
+	/* Clear interrupt */
+	writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
+}
+
+/**
  * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
  *
  * @hsotg: Programming view of DWC_otg controller
@@ -479,9 +499,8 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
 		if (dwc2_is_device_mode(hsotg)) {
 			dev_dbg(hsotg->dev,
 				" --Port interrupt received in Device mode--\n");
-			gintsts = GINTSTS_PRTINT;
-			writel(gintsts, hsotg->regs + GINTSTS);
-			retval = 1;
+			dwc2_handle_usb_port_intr(hsotg);
+			retval = IRQ_HANDLED;
 		}
 	}
 
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 012f17ec1a37..47b9eb5389b4 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -975,8 +975,8 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
 				  struct dwc2_qtd *qtd)
 {
 	struct dwc2_hcd_urb *urb = qtd->urb;
-	int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
 	enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE;
+	int pipe_type;
 	int urb_xfer_done;
 
 	if (dbg_hc(chan))
@@ -984,6 +984,11 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
 			 "--Host Channel %d Interrupt: Transfer Complete--\n",
 			 chnum);
 
+	if (!urb)
+		goto handle_xfercomp_done;
+
+	pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+
 	if (hsotg->core_params->dma_desc_enable > 0) {
 		dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status);
 		if (pipe_type == USB_ENDPOINT_XFER_ISOC)
@@ -1005,9 +1010,6 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
 		}
 	}
 
-	if (!urb)
-		goto handle_xfercomp_done;
-
 	/* Update the QTD and URB states */
 	switch (pipe_type) {
 	case USB_ENDPOINT_XFER_CONTROL:
@@ -1105,7 +1107,7 @@ static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
 			       struct dwc2_qtd *qtd)
 {
 	struct dwc2_hcd_urb *urb = qtd->urb;
-	int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+	int pipe_type;
 
 	dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n",
 		chnum);
@@ -1119,6 +1121,8 @@ static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
 	if (!urb)
 		goto handle_stall_halt;
 
+	pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+
 	if (pipe_type == USB_ENDPOINT_XFER_CONTROL)
 		dwc2_host_complete(hsotg, qtd, -EPIPE);
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a49217ae3533..d001417e8e37 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
  * dwc3_core_soft_reset - Issues core soft reset and PHY reset
  * @dwc: pointer to our context structure
  */
-static void dwc3_core_soft_reset(struct dwc3 *dwc)
+static int dwc3_core_soft_reset(struct dwc3 *dwc)
 {
 	u32		reg;
+	int		ret;
 
 	/* Before Resetting PHY, put Core in Reset */
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
@@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
 
 	usb_phy_init(dwc->usb2_phy);
 	usb_phy_init(dwc->usb3_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0) {
+		phy_exit(dwc->usb2_generic_phy);
+		return ret;
+	}
 	mdelay(100);
 
 	/* Clear USB3 PHY reset */
@@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_CORESOFTRESET;
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	return 0;
 }
 
 /**
@@ -242,6 +254,90 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 	}
 }
 
+static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
+			DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
+	if (!dwc->scratchbuf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
+{
+	dma_addr_t scratch_addr;
+	u32 param;
+	int ret;
+
+	if (!dwc->has_hibernation)
+		return 0;
+
+	if (!dwc->nr_scratch)
+		return 0;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return 0;
+
+	scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf,
+			dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
+			DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(dwc->dev, scratch_addr)) {
+		dev_err(dwc->dev, "failed to map scratch buffer\n");
+		ret = -EFAULT;
+		goto err0;
+	}
+
+	dwc->scratch_addr = scratch_addr;
+
+	param = lower_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
+	if (ret < 0)
+		goto err1;
+
+	param = upper_32_bits(scratch_addr);
+
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
+	if (ret < 0)
+		goto err1;
+
+	return 0;
+
+err1:
+	dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+
+err0:
+	return ret;
+}
+
+static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
+{
+	if (!dwc->has_hibernation)
+		return;
+
+	if (!dwc->nr_scratch)
+		return;
+
+	 /* should never fall here */
+	if (!WARN_ON(dwc->scratchbuf))
+		return;
+
+	dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch *
+			DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
+	kfree(dwc->scratchbuf);
+}
+
 static void dwc3_core_num_eps(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
@@ -277,6 +373,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 static int dwc3_core_init(struct dwc3 *dwc)
 {
 	unsigned long		timeout;
+	u32			hwparams4 = dwc->hwparams.hwparams4;
 	u32			reg;
 	int			ret;
 
@@ -306,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		cpu_relax();
 	} while (true);
 
-	dwc3_core_soft_reset(dwc);
+	ret = dwc3_core_soft_reset(dwc);
+	if (ret)
+		goto err0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@@ -314,7 +413,29 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
 	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
-		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		/**
+		 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
+		 * issue which would cause xHCI compliance tests to fail.
+		 *
+		 * Because of that we cannot enable clock gating on such
+		 * configurations.
+		 *
+		 * Refers to:
+		 *
+		 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
+		 * SOF/ITP Mode Used
+		 */
+		if ((dwc->dr_mode == USB_DR_MODE_HOST ||
+				dwc->dr_mode == USB_DR_MODE_OTG) &&
+				(dwc->revision >= DWC3_REVISION_210A &&
+				dwc->revision <= DWC3_REVISION_250A))
+			reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
+		else
+			reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
+		/* enable hibernation here */
+		dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
 		break;
 	default:
 		dev_dbg(dwc->dev, "No power optimization available\n");
@@ -333,16 +454,36 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
+	ret = dwc3_alloc_scratch_buffers(dwc);
+	if (ret)
+		goto err1;
+
+	ret = dwc3_setup_scratch_buffers(dwc);
+	if (ret)
+		goto err2;
+
 	return 0;
 
+err2:
+	dwc3_free_scratch_buffers(dwc);
+
+err1:
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
 err0:
 	return ret;
 }
 
 static void dwc3_core_exit(struct dwc3 *dwc)
 {
+	dwc3_free_scratch_buffers(dwc);
 	usb_phy_shutdown(dwc->usb2_phy);
 	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
@@ -411,32 +552,52 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	if (IS_ERR(dwc->usb2_phy)) {
 		ret = PTR_ERR(dwc->usb2_phy);
-
-		/*
-		 * if -ENXIO is returned, it means PHY layer wasn't
-		 * enabled, so it makes no sense to return -EPROBE_DEFER
-		 * in that case, since no PHY driver will ever probe.
-		 */
-		if (ret == -ENXIO)
+		if (ret == -ENXIO || ret == -ENODEV) {
+			dwc->usb2_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
 			return ret;
-
-		dev_err(dev, "no usb2 phy configured\n");
-		return -EPROBE_DEFER;
+		} else {
+			dev_err(dev, "no usb2 phy configured\n");
+			return ret;
+		}
 	}
 
 	if (IS_ERR(dwc->usb3_phy)) {
 		ret = PTR_ERR(dwc->usb3_phy);
+		if (ret == -ENXIO || ret == -ENODEV) {
+			dwc->usb3_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb3 phy configured\n");
+			return ret;
+		}
+	}
 
-		/*
-		 * if -ENXIO is returned, it means PHY layer wasn't
-		 * enabled, so it makes no sense to return -EPROBE_DEFER
-		 * in that case, since no PHY driver will ever probe.
-		 */
-		if (ret == -ENXIO)
+	dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+	if (IS_ERR(dwc->usb2_generic_phy)) {
+		ret = PTR_ERR(dwc->usb2_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV) {
+			dwc->usb2_generic_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb2 phy configured\n");
 			return ret;
+		}
+	}
 
-		dev_err(dev, "no usb3 phy configured\n");
-		return -EPROBE_DEFER;
+	dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+	if (IS_ERR(dwc->usb3_generic_phy)) {
+		ret = PTR_ERR(dwc->usb3_generic_phy);
+		if (ret == -ENOSYS || ret == -ENODEV) {
+			dwc->usb3_generic_phy = NULL;
+		} else if (ret == -EPROBE_DEFER) {
+			return ret;
+		} else {
+			dev_err(dev, "no usb3 phy configured\n");
+			return ret;
+		}
 	}
 
 	dwc->xhci_resources[0].start = res->start;
@@ -479,6 +640,14 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
+	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+		dwc->dr_mode = USB_DR_MODE_HOST;
+	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MODE_OTG;
+
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
@@ -487,21 +656,20 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
 	usb_phy_set_suspend(dwc->usb3_phy, 0);
+	ret = phy_power_on(dwc->usb2_generic_phy);
+	if (ret < 0)
+		goto err1;
+
+	ret = phy_power_on(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err_usb2phy_power;
 
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err1;
+		goto err_usb3phy_power;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
-		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
-		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
-
-	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
-		dwc->dr_mode = USB_DR_MODE_OTG;
-
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
@@ -568,6 +736,12 @@ err3:
 err2:
 	dwc3_event_buffers_cleanup(dwc);
 
+err_usb3phy_power:
+	phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+	phy_power_off(dwc->usb2_generic_phy);
+
 err1:
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -585,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev)
 
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
@@ -682,6 +858,8 @@ static int dwc3_suspend(struct device *dev)
 
 	usb_phy_shutdown(dwc->usb3_phy);
 	usb_phy_shutdown(dwc->usb2_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 
 	return 0;
 }
@@ -690,9 +868,17 @@ static int dwc3_resume(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
 	unsigned long	flags;
+	int		ret;
 
 	usb_phy_init(dwc->usb3_phy);
 	usb_phy_init(dwc->usb2_phy);
+	ret = phy_init(dwc->usb2_generic_phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_init(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err_usb2phy_init;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -716,6 +902,11 @@ static int dwc3_resume(struct device *dev)
 	pm_runtime_enable(dev);
 
 	return 0;
+
+err_usb2phy_init:
+	phy_exit(dwc->usb2_generic_phy);
+
+	return ret;
 }
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f8af8d44af85..57332e3768e4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,11 +31,14 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 
+#include <linux/phy/phy.h>
+
 /* Global constants */
 #define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
 
+#define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
 #define DWC3_EVENT_SIZE		4	/* bytes */
 #define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
 #define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
@@ -157,6 +160,7 @@
 #define DWC3_GCTL_PRTCAP_OTG	3
 
 #define DWC3_GCTL_CORESOFTRESET		(1 << 11)
+#define DWC3_GCTL_SOFITPSYNC		(1 << 10)
 #define DWC3_GCTL_SCALEDOWN(n)		((n) << 4)
 #define DWC3_GCTL_SCALEDOWN_MASK	DWC3_GCTL_SCALEDOWN(3)
 #define DWC3_GCTL_DISSCRAMBLE		(1 << 3)
@@ -318,7 +322,7 @@
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
 #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
-#define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS(x)		(((x) >> 15) & 1)
 #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
 #define DWC3_DEPCMD_CMDACT		(1 << 10)
@@ -393,6 +397,7 @@ struct dwc3_event_buffer {
  * @busy_slot: first slot which is owned by HW
  * @desc: usb_endpoint_descriptor pointer
  * @dwc: pointer to DWC controller
+ * @saved_state: ep state saved during hibernation
  * @flags: endpoint flags (wedged, stalled, ...)
  * @current_trb: index of current used trb
  * @number: endpoint number (1 - 15)
@@ -415,6 +420,7 @@ struct dwc3_ep {
 	const struct usb_ss_ep_comp_descriptor *comp_desc;
 	struct dwc3		*dwc;
 
+	u32			saved_state;
 	unsigned		flags;
 #define DWC3_EP_ENABLED		(1 << 0)
 #define DWC3_EP_STALL		(1 << 1)
@@ -598,6 +604,7 @@ struct dwc3_scratchpad_array {
  * @ep0_trb: dma address of ep0_trb
  * @ep0_usb_req: dummy req used while handling STD USB requests
  * @ep0_bounce_addr: dma address of ep0_bounce
+ * @scratch_addr: dma address of scratchbuf
  * @lock: for synchronizing
  * @dev: pointer to our struct device
  * @xhci: pointer to our xHCI child
@@ -606,6 +613,7 @@ struct dwc3_scratchpad_array {
  * @gadget_driver: pointer to the gadget driver
  * @regs: base address for our registers
  * @regs_size: address space size
+ * @nr_scratch: number of scratch buffers
  * @num_event_buffers: calculated number of event buffers
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -613,16 +621,10 @@ struct dwc3_scratchpad_array {
  * @dr_mode: requested mode of operation
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
  * @dcfg: saved contents of DCFG register
  * @gctl: saved contents of GCTL register
- * @is_selfpowered: true when we are selfpowered
- * @three_stage_setup: set if we perform a three phase setup
- * @ep0_bounced: true when we used bounce buffer
- * @ep0_expect_in: true when we expect a DATA IN transfer
- * @start_config_issued: true when StartConfig command has been issued
- * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
- * @needs_fifo_resize: not all users might want fifo resizing, flag it
- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
  * @isoch_delay: wValue from Set Isochronous Delay request;
  * @u2sel: parameter from Set SEL request.
  * @u2pel: parameter from Set SEL request.
@@ -637,15 +639,31 @@ struct dwc3_scratchpad_array {
  * @mem: points to start of memory which is used for this struct.
  * @hwparams: copy of hwparams registers
  * @root: debugfs root folder pointer
+ * @regset: debugfs pointer to regdump file
+ * @test_mode: true when we're entering a USB test mode
+ * @test_mode_nr: test feature selector
+ * @delayed_status: true when gadget driver asks for delayed status
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @has_hibernation: true when dwc3 was configured with Hibernation
+ * @is_selfpowered: true when we are selfpowered
+ * @needs_fifo_resize: not all users might want fifo resizing, flag it
+ * @pullups_connected: true when Run/Stop bit is set
+ * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @start_config_issued: true when StartConfig command has been issued
+ * @three_stage_setup: set if we perform a three phase setup
  */
 struct dwc3 {
 	struct usb_ctrlrequest	*ctrl_req;
 	struct dwc3_trb		*ep0_trb;
 	void			*ep0_bounce;
+	void			*scratchbuf;
 	u8			*setup_buf;
 	dma_addr_t		ctrl_req_addr;
 	dma_addr_t		ep0_trb_addr;
 	dma_addr_t		ep0_bounce_addr;
+	dma_addr_t		scratch_addr;
 	struct dwc3_request	ep0_usb_req;
 
 	/* device lock */
@@ -665,6 +683,9 @@ struct dwc3 {
 	struct usb_phy		*usb2_phy;
 	struct usb_phy		*usb3_phy;
 
+	struct phy		*usb2_generic_phy;
+	struct phy		*usb3_generic_phy;
+
 	void __iomem		*regs;
 	size_t			regs_size;
 
@@ -674,6 +695,7 @@ struct dwc3 {
 	u32			dcfg;
 	u32			gctl;
 
+	u32			nr_scratch;
 	u32			num_event_buffers;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -695,17 +717,9 @@ struct dwc3 {
 #define DWC3_REVISION_230A	0x5533230a
 #define DWC3_REVISION_240A	0x5533240a
 #define DWC3_REVISION_250A	0x5533250a
-
-	unsigned		is_selfpowered:1;
-	unsigned		three_stage_setup:1;
-	unsigned		ep0_bounced:1;
-	unsigned		ep0_expect_in:1;
-	unsigned		start_config_issued:1;
-	unsigned		setup_packet_pending:1;
-	unsigned		delayed_status:1;
-	unsigned		needs_fifo_resize:1;
-	unsigned		resize_fifos:1;
-	unsigned		pullups_connected:1;
+#define DWC3_REVISION_260A	0x5533260a
+#define DWC3_REVISION_270A	0x5533270a
+#define DWC3_REVISION_280A	0x5533280a
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
@@ -730,6 +744,18 @@ struct dwc3 {
 
 	u8			test_mode;
 	u8			test_mode_nr;
+
+	unsigned		delayed_status:1;
+	unsigned		ep0_bounced:1;
+	unsigned		ep0_expect_in:1;
+	unsigned		has_hibernation:1;
+	unsigned		is_selfpowered:1;
+	unsigned		needs_fifo_resize:1;
+	unsigned		pullups_connected:1;
+	unsigned		resize_fifos:1;
+	unsigned		setup_packet_pending:1;
+	unsigned		start_config_issued:1;
+	unsigned		three_stage_setup:1;
 };
 
 /* -------------------------------------------------------------------------- */
@@ -815,15 +841,15 @@ struct dwc3_event_depevt {
  *	12	- VndrDevTstRcved
  * @reserved15_12: Reserved, not used
  * @event_info: Information about this event
- * @reserved31_24: Reserved, not used
+ * @reserved31_25: Reserved, not used
  */
 struct dwc3_event_devt {
 	u32	one_bit:1;
 	u32	device_event:7;
 	u32	type:4;
 	u32	reserved15_12:4;
-	u32	event_info:8;
-	u32	reserved31_24:8;
+	u32	event_info:9;
+	u32	reserved31_25:7;
 } __packed;
 
 /**
@@ -856,6 +882,19 @@ union dwc3_event {
 	struct dwc3_event_gevt		gevt;
 };
 
+/**
+ * struct dwc3_gadget_ep_cmd_params - representation of endpoint command
+ * parameters
+ * @param2: third parameter
+ * @param1: second parameter
+ * @param0: first parameter
+ */
+struct dwc3_gadget_ep_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
 /*
  * DWC3 Features to be used as Driver Data
  */
@@ -881,11 +920,31 @@ static inline void dwc3_host_exit(struct dwc3 *dwc)
 #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_get_link_state(struct dwc3 *dwc);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
 { return 0; }
 static inline void dwc3_gadget_exit(struct dwc3 *dwc)
 { }
+static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{ return 0; }
+static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{ return 0; }
+static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
+		enum dwc3_link_state state)
+{ return 0; }
+
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{ return 0; }
+static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
+		int cmd, u32 param)
+{ return 0; }
 #endif
 
 /* power management interface */
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index b1d7ee6e40b7..1160ff41bed4 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -423,11 +423,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "missing memory base resource\n");
-		return -EINVAL;
-	}
-
 	base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2da0a5a2803a..a740eac74d56 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -68,6 +68,22 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
 }
 
 /**
+ * dwc3_gadget_get_link_state - Gets current state of USB Link
+ * @dwc: pointer to our context structure
+ *
+ * Caller should take care of locking. This function will
+ * return the link state on success (>= 0) or -ETIMEDOUT.
+ */
+int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	return DWC3_DSTS_USBLNKST(reg);
+}
+
+/**
  * dwc3_gadget_set_link_state - Sets USB Link to a particular State
  * @dwc: pointer to our context structure
  * @state: the state to put link into
@@ -417,7 +433,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore)
+		bool ignore, bool restore)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 
@@ -436,6 +452,11 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 	if (ignore)
 		params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
 
+	if (restore) {
+		params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
+		params.param2 |= dep->saved_state;
+	}
+
 	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
 		| DWC3_DEPCFG_XFER_NOT_READY_EN;
 
@@ -494,7 +515,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore)
+		bool ignore, bool restore)
 {
 	struct dwc3		*dwc = dep->dwc;
 	u32			reg;
@@ -508,7 +529,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 			return ret;
 	}
 
-	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore);
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
+			restore);
 	if (ret)
 		return ret;
 
@@ -548,13 +570,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 	return 0;
 }
 
-static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force);
 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 {
 	struct dwc3_request		*req;
 
 	if (!list_empty(&dep->req_queued)) {
-		dwc3_stop_active_transfer(dwc, dep->number);
+		dwc3_stop_active_transfer(dwc, dep->number, true);
 
 		/* - giveback all requests to gadget driver */
 		while (!list_empty(&dep->req_queued)) {
@@ -659,7 +681,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 	}
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false);
+	ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -771,9 +793,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 		else
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
-
-		if (!req->request.no_interrupt && !chain)
-			trb->ctrl |= DWC3_TRB_CTRL_IOC;
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -788,6 +807,9 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		BUG();
 	}
 
+	if (!req->request.no_interrupt && !chain)
+		trb->ctrl |= DWC3_TRB_CTRL_IOC;
+
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		trb->ctrl |= DWC3_TRB_CTRL_CSP;
@@ -1077,7 +1099,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		 */
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			if (list_empty(&dep->req_queued)) {
-				dwc3_stop_active_transfer(dwc, dep->number);
+				dwc3_stop_active_transfer(dwc, dep->number, true);
 				dep->flags = DWC3_EP_ENABLED;
 			}
 			return 0;
@@ -1107,6 +1129,23 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		return ret;
 	}
 
+	/*
+	 * 4. Stream Capable Bulk Endpoints. We need to start the transfer
+	 * right away, otherwise host will not know we have streams to be
+	 * handled.
+	 */
+	if (dep->stream_capable) {
+		int	ret;
+
+		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		if (ret && ret != -EBUSY) {
+			struct dwc3	*dwc = dep->dwc;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+	}
+
 	return 0;
 }
 
@@ -1163,7 +1202,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		}
 		if (r == req) {
 			/* wait until it is processed */
-			dwc3_stop_active_transfer(dwc, dep->number);
+			dwc3_stop_active_transfer(dwc, dep->number, true);
 			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1194,8 +1233,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_SETSTALL, &params);
 		if (ret)
-			dev_err(dwc->dev, "failed to %s STALL on %s\n",
-					value ? "set" : "clear",
+			dev_err(dwc->dev, "failed to set STALL on %s\n",
 					dep->name);
 		else
 			dep->flags |= DWC3_EP_STALL;
@@ -1203,8 +1241,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_CLEARSTALL, &params);
 		if (ret)
-			dev_err(dwc->dev, "failed to %s STALL on %s\n",
-					value ? "set" : "clear",
+			dev_err(dwc->dev, "failed to clear STALL on %s\n",
 					dep->name);
 		else
 			dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
@@ -1387,7 +1424,7 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
 	return 0;
 }
 
-static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 {
 	u32			reg;
 	u32			timeout = 500;
@@ -1402,9 +1439,17 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
 		if (dwc->revision >= DWC3_REVISION_194A)
 			reg &= ~DWC3_DCTL_KEEP_CONNECT;
 		reg |= DWC3_DCTL_RUN_STOP;
+
+		if (dwc->has_hibernation)
+			reg |= DWC3_DCTL_KEEP_CONNECT;
+
 		dwc->pullups_connected = true;
 	} else {
 		reg &= ~DWC3_DCTL_RUN_STOP;
+
+		if (dwc->has_hibernation && !suspend)
+			reg &= ~DWC3_DCTL_KEEP_CONNECT;
+
 		dwc->pullups_connected = false;
 	}
 
@@ -1442,7 +1487,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	is_on = !!is_on;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	ret = dwc3_gadget_run_stop(dwc, is_on);
+	ret = dwc3_gadget_run_stop(dwc, is_on, false);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -1549,14 +1594,16 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		goto err2;
 	}
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		goto err3;
@@ -1849,15 +1896,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 			 */
 			dep->flags = DWC3_EP_PENDING_REQUEST;
 		} else {
-			dwc3_stop_active_transfer(dwc, dep->number);
+			dwc3_stop_active_transfer(dwc, dep->number, true);
 			dep->flags = DWC3_EP_ENABLED;
 		}
 		return 1;
 	}
 
-	if ((event->status & DEPEVT_STATUS_IOC) &&
-			(trb->ctrl & DWC3_TRB_CTRL_IOC))
-		return 0;
 	return 1;
 }
 
@@ -1999,7 +2043,25 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc)
 	}
 }
 
-static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
+static void dwc3_suspend_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->suspend(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_resume_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->resume(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
 {
 	struct dwc3_ep *dep;
 	struct dwc3_gadget_ep_cmd_params params;
@@ -2031,7 +2093,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
 	 */
 
 	cmd = DWC3_DEPCMD_ENDTRANSFER;
-	cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
+	cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
+	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
@@ -2260,17 +2323,23 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		reg |= DWC3_DCTL_HIRD_THRES(12);
 
 		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	} else {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
+		dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	}
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		return;
 	}
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true,
+			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
 		return;
@@ -2378,9 +2447,50 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 
 	dwc->link_state = next;
 
+	switch (next) {
+	case DWC3_LINK_STATE_U1:
+		if (dwc->speed == USB_SPEED_SUPER)
+			dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_U2:
+	case DWC3_LINK_STATE_U3:
+		dwc3_suspend_gadget(dwc);
+		break;
+	case DWC3_LINK_STATE_RESUME:
+		dwc3_resume_gadget(dwc);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
 	dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
 }
 
+static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
+		unsigned int evtinfo)
+{
+	unsigned int is_ss = evtinfo & BIT(4);
+
+	/**
+	 * WORKAROUND: DWC3 revison 2.20a with hibernation support
+	 * have a known issue which can cause USB CV TD.9.23 to fail
+	 * randomly.
+	 *
+	 * Because of this issue, core could generate bogus hibernation
+	 * events which SW needs to ignore.
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
+	 * Device Fallback from SuperSpeed
+	 */
+	if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
+		return;
+
+	/* enter hibernation here */
+}
+
 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_devt *event)
 {
@@ -2397,6 +2507,13 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 	case DWC3_DEVICE_EVENT_WAKEUP:
 		dwc3_gadget_wakeup_interrupt(dwc);
 		break;
+	case DWC3_DEVICE_EVENT_HIBER_REQ:
+		if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
+					"unexpected hibernation event\n"))
+			break;
+
+		dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
+		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
 		break;
@@ -2661,8 +2778,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 int dwc3_gadget_prepare(struct dwc3 *dwc)
 {
-	if (dwc->pullups_connected)
+	if (dwc->pullups_connected) {
 		dwc3_gadget_disable_irq(dwc);
+		dwc3_gadget_run_stop(dwc, true, true);
+	}
 
 	return 0;
 }
@@ -2671,7 +2790,7 @@ void dwc3_gadget_complete(struct dwc3 *dwc)
 {
 	if (dwc->pullups_connected) {
 		dwc3_gadget_enable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true);
+		dwc3_gadget_run_stop(dwc, true, false);
 	}
 }
 
@@ -2694,12 +2813,14 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
 	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret)
 		goto err0;
 
 	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
+			false);
 	if (ret)
 		goto err1;
 
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index febe1aa7b714..a0ee75b68a80 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -56,12 +56,6 @@ struct dwc3;
 /* DEPXFERCFG parameter 0 */
 #define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
 
-struct dwc3_gadget_ep_cmd_params {
-	u32	param2;
-	u32	param1;
-	u32	param0;
-};
-
 /* -------------------------------------------------------------------------- */
 
 #define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
@@ -85,9 +79,6 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status);
 
-int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
-int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event);
 void dwc3_ep0_out_start(struct dwc3 *dwc);
@@ -95,9 +86,6 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags);
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 8154165aa601..3557c7e5040d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -226,7 +226,7 @@ config USB_GR_UDC
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP1
-	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30
@@ -301,7 +301,6 @@ config USB_PXA27X
 	   gadget drivers to also be dynamically linked.
 
 config USB_S3C_HSOTG
-	depends on ARM
 	tristate "Designware/S3C HS/OtG USB Device controller"
 	help
 	  The Designware USB2.0 high-speed gadget controller
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cea8c20a1425..f605ad8c1902 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1758,15 +1758,15 @@ static int at91udc_probe(struct platform_device *pdev)
 
 	/* newer chips have more FIFO memory than rm9200 */
 	if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) {
-		usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64);
-		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
-		usb_ep_set_maxpacket_limit(&udc->ep[4].ep, 512);
-		usb_ep_set_maxpacket_limit(&udc->ep[5].ep, 512);
+		udc->ep[0].maxpacket = 64;
+		udc->ep[3].maxpacket = 64;
+		udc->ep[4].maxpacket = 512;
+		udc->ep[5].maxpacket = 512;
 	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
-		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
+		udc->ep[3].maxpacket = 64;
 	} else if (cpu_is_at91sam9263()) {
-		usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64);
-		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
+		udc->ep[0].maxpacket = 64;
+		udc->ep[3].maxpacket = 64;
 	}
 
 	udc->udp_baseaddr = ioremap(res->start, resource_size(res));
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 52771d4c44bc..9f65324f9ae0 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (dma_status) {
 		int i;
 
-		for (i = 1; i < USBA_NR_ENDPOINTS; i++)
+		for (i = 1; i < USBA_NR_DMAS; i++)
 			if (dma_status & (1 << i))
 				usba_dma_irq(udc, &udc->usba_ep[i]);
 	}
@@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (ep_status) {
 		int i;
 
-		for (i = 0; i < USBA_NR_ENDPOINTS; i++)
+		for (i = 0; i < udc->num_ep; i++)
 			if (ep_status & (1 << i)) {
 				if (ep_is_control(&udc->usba_ep[i]))
 					usba_control_irq(udc, &udc->usba_ep[i]);
@@ -1827,12 +1827,12 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
-	udc->driver = NULL;
-
 	clk_disable_unprepare(udc->hclk);
 	clk_disable_unprepare(udc->pclk);
 
-	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+	DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name);
+
+	udc->driver = NULL;
 
 	return 0;
 }
@@ -1914,6 +1914,12 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		i++;
 	}
 
+	if (i == 0) {
+		dev_err(&pdev->dev, "of_probe: no endpoint specified\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
 	return eps;
 err:
 	return ERR_PTR(ret);
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 2922db50befe..a70706e8cb02 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -210,7 +210,7 @@
 #define USBA_FIFO_BASE(x)	((x) << 16)
 
 /* Synth parameters */
-#define USBA_NR_ENDPOINTS	7
+#define USBA_NR_DMAS		7
 
 #define EP0_FIFO_SIZE		64
 #define EP0_EPT_SIZE		USBA_EPT_SIZE_64
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d742bed7a5fa..fab906429b80 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1139,7 +1139,7 @@ struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
 
 	uc = copy_gadget_strings(sp, n_gstrings, n_strings);
 	if (IS_ERR(uc))
-		return ERR_PTR(PTR_ERR(uc));
+		return ERR_CAST(uc);
 
 	n_gs = get_containers_gs(uc);
 	ret = usb_string_ids_tab(cdev, n_gs[0]->strings);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 2b4334394076..2e164dca08e8 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -28,6 +28,10 @@
 #include <linux/usb/composite.h>
 #include <linux/usb/functionfs.h>
 
+#include <linux/aio.h>
+#include <linux/mmu_context.h>
+#include <linux/poll.h>
+
 #include "u_fs.h"
 #include "configfs.h"
 
@@ -99,6 +103,14 @@ static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
 }
 
 
+static inline enum ffs_setup_state
+ffs_setup_state_clear_cancelled(struct ffs_data *ffs)
+{
+	return (enum ffs_setup_state)
+		cmpxchg(&ffs->setup_state, FFS_SETUP_CANCELLED, FFS_NO_SETUP);
+}
+
+
 static void ffs_func_eps_disable(struct ffs_function *func);
 static int __must_check ffs_func_eps_enable(struct ffs_function *func);
 
@@ -122,8 +134,8 @@ struct ffs_ep {
 	struct usb_ep			*ep;	/* P: ffs->eps_lock */
 	struct usb_request		*req;	/* P: epfile->mutex */
 
-	/* [0]: full speed, [1]: high speed */
-	struct usb_endpoint_descriptor	*descs[2];
+	/* [0]: full speed, [1]: high speed, [2]: super speed */
+	struct usb_endpoint_descriptor	*descs[3];
 
 	u8				num;
 
@@ -148,6 +160,25 @@ struct ffs_epfile {
 	unsigned char			_pad;
 };
 
+/*  ffs_io_data structure ***************************************************/
+
+struct ffs_io_data {
+	bool aio;
+	bool read;
+
+	struct kiocb *kiocb;
+	const struct iovec *iovec;
+	unsigned long nr_segs;
+	char __user *buf;
+	size_t len;
+
+	struct mm_struct *mm;
+	struct work_struct work;
+
+	struct usb_ep *ep;
+	struct usb_request *req;
+};
+
 static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
 static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
 
@@ -161,8 +192,10 @@ ffs_sb_create_file(struct super_block *sb, const char *name, void *data,
 DEFINE_MUTEX(ffs_lock);
 EXPORT_SYMBOL(ffs_lock);
 
-static struct ffs_dev *ffs_find_dev(const char *name);
+static struct ffs_dev *_ffs_find_dev(const char *name);
+static struct ffs_dev *_ffs_alloc_dev(void);
 static int _ffs_name_dev(struct ffs_dev *dev, const char *name);
+static void _ffs_free_dev(struct ffs_dev *dev);
 static void *ffs_acquire_dev(const char *dev_name);
 static void ffs_release_dev(struct ffs_data *ffs_data);
 static int ffs_ready(struct ffs_data *ffs);
@@ -218,7 +251,7 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 	}
 
 	ffs->setup_state = FFS_NO_SETUP;
-	return ffs->ep0req_status;
+	return req->status ? req->status : req->actual;
 }
 
 static int __ffs_ep0_stall(struct ffs_data *ffs)
@@ -244,7 +277,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 	ENTER();
 
 	/* Fast check if setup was canceled */
-	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+	if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED)
 		return -EIDRM;
 
 	/* Acquire mutex */
@@ -310,8 +343,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		 * rather then _irqsave
 		 */
 		spin_lock_irq(&ffs->ev.waitq.lock);
-		switch (FFS_SETUP_STATE(ffs)) {
-		case FFS_SETUP_CANCELED:
+		switch (ffs_setup_state_clear_cancelled(ffs)) {
+		case FFS_SETUP_CANCELLED:
 			ret = -EIDRM;
 			goto done_spin;
 
@@ -346,7 +379,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		/*
 		 * We are guaranteed to be still in FFS_ACTIVE state
 		 * but the state of setup could have changed from
-		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need
+		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELLED so we need
 		 * to check for that.  If that happened we copied data
 		 * from user space in vain but it's unlikely.
 		 *
@@ -355,7 +388,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		 * transition can be performed and it's protected by
 		 * mutex.
 		 */
-		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+		if (ffs_setup_state_clear_cancelled(ffs) ==
+		    FFS_SETUP_CANCELLED) {
 			ret = -EIDRM;
 done_spin:
 			spin_unlock_irq(&ffs->ev.waitq.lock);
@@ -421,7 +455,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 	ENTER();
 
 	/* Fast check if setup was canceled */
-	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+	if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED)
 		return -EIDRM;
 
 	/* Acquire mutex */
@@ -441,8 +475,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 	 */
 	spin_lock_irq(&ffs->ev.waitq.lock);
 
-	switch (FFS_SETUP_STATE(ffs)) {
-	case FFS_SETUP_CANCELED:
+	switch (ffs_setup_state_clear_cancelled(ffs)) {
+	case FFS_SETUP_CANCELLED:
 		ret = -EIDRM;
 		break;
 
@@ -489,7 +523,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 		spin_lock_irq(&ffs->ev.waitq.lock);
 
 		/* See ffs_ep0_write() */
-		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+		if (ffs_setup_state_clear_cancelled(ffs) ==
+		    FFS_SETUP_CANCELLED) {
 			ret = -EIDRM;
 			break;
 		}
@@ -558,6 +593,45 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 	return ret;
 }
 
+static unsigned int ffs_ep0_poll(struct file *file, poll_table *wait)
+{
+	struct ffs_data *ffs = file->private_data;
+	unsigned int mask = POLLWRNORM;
+	int ret;
+
+	poll_wait(file, &ffs->ev.waitq, wait);
+
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret < 0))
+		return mask;
+
+	switch (ffs->state) {
+	case FFS_READ_DESCRIPTORS:
+	case FFS_READ_STRINGS:
+		mask |= POLLOUT;
+		break;
+
+	case FFS_ACTIVE:
+		switch (ffs->setup_state) {
+		case FFS_NO_SETUP:
+			if (ffs->ev.count)
+				mask |= POLLIN;
+			break;
+
+		case FFS_SETUP_PENDING:
+		case FFS_SETUP_CANCELLED:
+			mask |= (POLLIN | POLLOUT);
+			break;
+		}
+	case FFS_CLOSING:
+		break;
+	}
+
+	mutex_unlock(&ffs->mutex);
+
+	return mask;
+}
+
 static const struct file_operations ffs_ep0_operations = {
 	.llseek =	no_llseek,
 
@@ -566,6 +640,7 @@ static const struct file_operations ffs_ep0_operations = {
 	.read =		ffs_ep0_read,
 	.release =	ffs_ep0_release,
 	.unlocked_ioctl =	ffs_ep0_ioctl,
+	.poll =		ffs_ep0_poll,
 };
 
 
@@ -581,8 +656,52 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 	}
 }
 
-static ssize_t ffs_epfile_io(struct file *file,
-			     char __user *buf, size_t len, int read)
+static void ffs_user_copy_worker(struct work_struct *work)
+{
+	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
+						   work);
+	int ret = io_data->req->status ? io_data->req->status :
+					 io_data->req->actual;
+
+	if (io_data->read && ret > 0) {
+		int i;
+		size_t pos = 0;
+		use_mm(io_data->mm);
+		for (i = 0; i < io_data->nr_segs; i++) {
+			if (unlikely(copy_to_user(io_data->iovec[i].iov_base,
+						 &io_data->buf[pos],
+						 io_data->iovec[i].iov_len))) {
+				ret = -EFAULT;
+				break;
+			}
+			pos += io_data->iovec[i].iov_len;
+		}
+		unuse_mm(io_data->mm);
+	}
+
+	aio_complete(io_data->kiocb, ret, ret);
+
+	usb_ep_free_request(io_data->ep, io_data->req);
+
+	io_data->kiocb->private = NULL;
+	if (io_data->read)
+		kfree(io_data->iovec);
+	kfree(io_data->buf);
+	kfree(io_data);
+}
+
+static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
+					 struct usb_request *req)
+{
+	struct ffs_io_data *io_data = req->context;
+
+	ENTER();
+
+	INIT_WORK(&io_data->work, ffs_user_copy_worker);
+	schedule_work(&io_data->work);
+}
+
+static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 {
 	struct ffs_epfile *epfile = file->private_data;
 	struct ffs_ep *ep;
@@ -612,7 +731,7 @@ static ssize_t ffs_epfile_io(struct file *file,
 	}
 
 	/* Do we halt? */
-	halt = !read == !epfile->in;
+	halt = (!io_data->read == !epfile->in);
 	if (halt && epfile->isoc) {
 		ret = -EINVAL;
 		goto error;
@@ -630,15 +749,32 @@ static ssize_t ffs_epfile_io(struct file *file,
 		 * Controller may require buffer size to be aligned to
 		 * maxpacketsize of an out endpoint.
 		 */
-		data_len = read ? usb_ep_align_maybe(gadget, ep->ep, len) : len;
+		data_len = io_data->read ?
+			   usb_ep_align_maybe(gadget, ep->ep, io_data->len) :
+			   io_data->len;
 
 		data = kmalloc(data_len, GFP_KERNEL);
 		if (unlikely(!data))
 			return -ENOMEM;
-
-		if (!read && unlikely(copy_from_user(data, buf, len))) {
-			ret = -EFAULT;
-			goto error;
+		if (io_data->aio && !io_data->read) {
+			int i;
+			size_t pos = 0;
+			for (i = 0; i < io_data->nr_segs; i++) {
+				if (unlikely(copy_from_user(&data[pos],
+					     io_data->iovec[i].iov_base,
+					     io_data->iovec[i].iov_len))) {
+					ret = -EFAULT;
+					goto error;
+				}
+				pos += io_data->iovec[i].iov_len;
+			}
+		} else {
+			if (!io_data->read &&
+			    unlikely(__copy_from_user(data, io_data->buf,
+						      io_data->len))) {
+				ret = -EFAULT;
+				goto error;
+			}
 		}
 	}
 
@@ -661,40 +797,78 @@ static ssize_t ffs_epfile_io(struct file *file,
 		ret = -EBADMSG;
 	} else {
 		/* Fire the request */
-		DECLARE_COMPLETION_ONSTACK(done);
+		struct usb_request *req;
 
-		struct usb_request *req = ep->req;
-		req->context  = &done;
-		req->complete = ffs_epfile_io_complete;
-		req->buf      = data;
-		req->length   = data_len;
+		if (io_data->aio) {
+			req = usb_ep_alloc_request(ep->ep, GFP_KERNEL);
+			if (unlikely(!req))
+				goto error_lock;
 
-		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+			req->buf      = data;
+			req->length   = io_data->len;
 
-		spin_unlock_irq(&epfile->ffs->eps_lock);
+			io_data->buf = data;
+			io_data->ep = ep->ep;
+			io_data->req = req;
 
-		if (unlikely(ret < 0)) {
-			/* nop */
-		} else if (unlikely(wait_for_completion_interruptible(&done))) {
-			ret = -EINTR;
-			usb_ep_dequeue(ep->ep, req);
+			req->context  = io_data;
+			req->complete = ffs_epfile_async_io_complete;
+
+			ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+			if (unlikely(ret)) {
+				usb_ep_free_request(ep->ep, req);
+				goto error_lock;
+			}
+			ret = -EIOCBQUEUED;
+
+			spin_unlock_irq(&epfile->ffs->eps_lock);
 		} else {
-			/*
-			 * XXX We may end up silently droping data here.
-			 * Since data_len (i.e. req->length) may be bigger
-			 * than len (after being rounded up to maxpacketsize),
-			 * we may end up with more data then user space has
-			 * space for.
-			 */
-			ret = ep->status;
-			if (read && ret > 0 &&
-			    unlikely(copy_to_user(buf, data,
-						  min_t(size_t, ret, len))))
-				ret = -EFAULT;
+			DECLARE_COMPLETION_ONSTACK(done);
+
+			req = ep->req;
+			req->buf      = data;
+			req->length   = io_data->len;
+
+			req->context  = &done;
+			req->complete = ffs_epfile_io_complete;
+
+			ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+
+			spin_unlock_irq(&epfile->ffs->eps_lock);
+
+			if (unlikely(ret < 0)) {
+				/* nop */
+			} else if (unlikely(
+				   wait_for_completion_interruptible(&done))) {
+				ret = -EINTR;
+				usb_ep_dequeue(ep->ep, req);
+			} else {
+				/*
+				 * XXX We may end up silently droping data
+				 * here.  Since data_len (i.e. req->length) may
+				 * be bigger than len (after being rounded up
+				 * to maxpacketsize), we may end up with more
+				 * data then user space has space for.
+				 */
+				ret = ep->status;
+				if (io_data->read && ret > 0) {
+					ret = min_t(size_t, ret, io_data->len);
+
+					if (unlikely(copy_to_user(io_data->buf,
+						data, ret)))
+						ret = -EFAULT;
+				}
+			}
+			kfree(data);
 		}
 	}
 
 	mutex_unlock(&epfile->mutex);
+	return ret;
+
+error_lock:
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+	mutex_unlock(&epfile->mutex);
 error:
 	kfree(data);
 	return ret;
@@ -704,17 +878,31 @@ static ssize_t
 ffs_epfile_write(struct file *file, const char __user *buf, size_t len,
 		 loff_t *ptr)
 {
+	struct ffs_io_data io_data;
+
 	ENTER();
 
-	return ffs_epfile_io(file, (char __user *)buf, len, 0);
+	io_data.aio = false;
+	io_data.read = false;
+	io_data.buf = (char * __user)buf;
+	io_data.len = len;
+
+	return ffs_epfile_io(file, &io_data);
 }
 
 static ssize_t
 ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr)
 {
+	struct ffs_io_data io_data;
+
 	ENTER();
 
-	return ffs_epfile_io(file, buf, len, 1);
+	io_data.aio = false;
+	io_data.read = true;
+	io_data.buf = buf;
+	io_data.len = len;
+
+	return ffs_epfile_io(file, &io_data);
 }
 
 static int
@@ -733,6 +921,89 @@ ffs_epfile_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static int ffs_aio_cancel(struct kiocb *kiocb)
+{
+	struct ffs_io_data *io_data = kiocb->private;
+	struct ffs_epfile *epfile = kiocb->ki_filp->private_data;
+	int value;
+
+	ENTER();
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+
+	if (likely(io_data && io_data->ep && io_data->req))
+		value = usb_ep_dequeue(io_data->ep, io_data->req);
+	else
+		value = -EINVAL;
+
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+
+	return value;
+}
+
+static ssize_t ffs_epfile_aio_write(struct kiocb *kiocb,
+				    const struct iovec *iovec,
+				    unsigned long nr_segs, loff_t loff)
+{
+	struct ffs_io_data *io_data;
+
+	ENTER();
+
+	io_data = kmalloc(sizeof(*io_data), GFP_KERNEL);
+	if (unlikely(!io_data))
+		return -ENOMEM;
+
+	io_data->aio = true;
+	io_data->read = false;
+	io_data->kiocb = kiocb;
+	io_data->iovec = iovec;
+	io_data->nr_segs = nr_segs;
+	io_data->len = kiocb->ki_nbytes;
+	io_data->mm = current->mm;
+
+	kiocb->private = io_data;
+
+	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+
+	return ffs_epfile_io(kiocb->ki_filp, io_data);
+}
+
+static ssize_t ffs_epfile_aio_read(struct kiocb *kiocb,
+				   const struct iovec *iovec,
+				   unsigned long nr_segs, loff_t loff)
+{
+	struct ffs_io_data *io_data;
+	struct iovec *iovec_copy;
+
+	ENTER();
+
+	iovec_copy = kmalloc_array(nr_segs, sizeof(*iovec_copy), GFP_KERNEL);
+	if (unlikely(!iovec_copy))
+		return -ENOMEM;
+
+	memcpy(iovec_copy, iovec, sizeof(struct iovec)*nr_segs);
+
+	io_data = kmalloc(sizeof(*io_data), GFP_KERNEL);
+	if (unlikely(!io_data)) {
+		kfree(iovec_copy);
+		return -ENOMEM;
+	}
+
+	io_data->aio = true;
+	io_data->read = true;
+	io_data->kiocb = kiocb;
+	io_data->iovec = iovec_copy;
+	io_data->nr_segs = nr_segs;
+	io_data->len = kiocb->ki_nbytes;
+	io_data->mm = current->mm;
+
+	kiocb->private = io_data;
+
+	kiocb_set_cancel_fn(kiocb, ffs_aio_cancel);
+
+	return ffs_epfile_io(kiocb->ki_filp, io_data);
+}
+
 static int
 ffs_epfile_release(struct inode *inode, struct file *file)
 {
@@ -789,6 +1060,8 @@ static const struct file_operations ffs_epfile_operations = {
 	.open =		ffs_epfile_open,
 	.write =	ffs_epfile_write,
 	.read =		ffs_epfile_read,
+	.aio_write =	ffs_epfile_aio_write,
+	.aio_read =	ffs_epfile_aio_read,
 	.release =	ffs_epfile_release,
 	.unlocked_ioctl =	ffs_epfile_ioctl,
 };
@@ -1172,7 +1445,7 @@ static void ffs_data_clear(struct ffs_data *ffs)
 	if (ffs->epfiles)
 		ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count);
 
-	kfree(ffs->raw_descs);
+	kfree(ffs->raw_descs_data);
 	kfree(ffs->raw_strings);
 	kfree(ffs->stringtabs);
 }
@@ -1184,14 +1457,15 @@ static void ffs_data_reset(struct ffs_data *ffs)
 	ffs_data_clear(ffs);
 
 	ffs->epfiles = NULL;
+	ffs->raw_descs_data = NULL;
 	ffs->raw_descs = NULL;
 	ffs->raw_strings = NULL;
 	ffs->stringtabs = NULL;
 
 	ffs->raw_descs_length = 0;
-	ffs->raw_fs_descs_length = 0;
 	ffs->fs_descs_count = 0;
 	ffs->hs_descs_count = 0;
+	ffs->ss_descs_count = 0;
 
 	ffs->strings_count = 0;
 	ffs->interfaces_count = 0;
@@ -1334,7 +1608,24 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	do {
 		struct usb_endpoint_descriptor *ds;
-		ds = ep->descs[ep->descs[1] ? 1 : 0];
+		int desc_idx;
+
+		if (ffs->gadget->speed == USB_SPEED_SUPER)
+			desc_idx = 2;
+		else if (ffs->gadget->speed == USB_SPEED_HIGH)
+			desc_idx = 1;
+		else
+			desc_idx = 0;
+
+		/* fall-back to lower speed if desc missing for current speed */
+		do {
+			ds = ep->descs[desc_idx];
+		} while (!ds && --desc_idx >= 0);
+
+		if (!ds) {
+			ret = -EINVAL;
+			break;
+		}
 
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
@@ -1469,6 +1760,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	}
 		break;
 
+	case USB_DT_SS_ENDPOINT_COMP:
+		pr_vdebug("EP SS companion descriptor\n");
+		if (length != sizeof(struct usb_ss_ep_comp_descriptor))
+			goto inv_length;
+		break;
+
 	case USB_DT_OTHER_SPEED_CONFIG:
 	case USB_DT_INTERFACE_POWER:
 	case USB_DT_DEBUG:
@@ -1579,60 +1876,76 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 static int __ffs_data_got_descs(struct ffs_data *ffs,
 				char *const _data, size_t len)
 {
-	unsigned fs_count, hs_count;
-	int fs_len, ret = -EINVAL;
-	char *data = _data;
+	char *data = _data, *raw_descs;
+	unsigned counts[3], flags;
+	int ret = -EINVAL, i;
 
 	ENTER();
 
-	if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC ||
-		     get_unaligned_le32(data + 4) != len))
+	if (get_unaligned_le32(data + 4) != len)
 		goto error;
-	fs_count = get_unaligned_le32(data +  8);
-	hs_count = get_unaligned_le32(data + 12);
 
-	if (!fs_count && !hs_count)
-		goto einval;
-
-	data += 16;
-	len  -= 16;
-
-	if (likely(fs_count)) {
-		fs_len = ffs_do_descs(fs_count, data, len,
-				      __ffs_data_do_entity, ffs);
-		if (unlikely(fs_len < 0)) {
-			ret = fs_len;
+	switch (get_unaligned_le32(data)) {
+	case FUNCTIONFS_DESCRIPTORS_MAGIC:
+		flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC;
+		data += 8;
+		len  -= 8;
+		break;
+	case FUNCTIONFS_DESCRIPTORS_MAGIC_V2:
+		flags = get_unaligned_le32(data + 8);
+		if (flags & ~(FUNCTIONFS_HAS_FS_DESC |
+			      FUNCTIONFS_HAS_HS_DESC |
+			      FUNCTIONFS_HAS_SS_DESC)) {
+			ret = -ENOSYS;
 			goto error;
 		}
+		data += 12;
+		len  -= 12;
+		break;
+	default:
+		goto error;
+	}
 
-		data += fs_len;
-		len  -= fs_len;
-	} else {
-		fs_len = 0;
+	/* Read fs_count, hs_count and ss_count (if present) */
+	for (i = 0; i < 3; ++i) {
+		if (!(flags & (1 << i))) {
+			counts[i] = 0;
+		} else if (len < 4) {
+			goto error;
+		} else {
+			counts[i] = get_unaligned_le32(data);
+			data += 4;
+			len  -= 4;
+		}
 	}
 
-	if (likely(hs_count)) {
-		ret = ffs_do_descs(hs_count, data, len,
+	/* Read descriptors */
+	raw_descs = data;
+	for (i = 0; i < 3; ++i) {
+		if (!counts[i])
+			continue;
+		ret = ffs_do_descs(counts[i], data, len,
 				   __ffs_data_do_entity, ffs);
-		if (unlikely(ret < 0))
+		if (ret < 0)
 			goto error;
-	} else {
-		ret = 0;
+		data += ret;
+		len  -= ret;
 	}
 
-	if (unlikely(len != ret))
-		goto einval;
+	if (raw_descs == data || len) {
+		ret = -EINVAL;
+		goto error;
+	}
 
-	ffs->raw_fs_descs_length = fs_len;
-	ffs->raw_descs_length    = fs_len + ret;
-	ffs->raw_descs           = _data;
-	ffs->fs_descs_count      = fs_count;
-	ffs->hs_descs_count      = hs_count;
+	ffs->raw_descs_data	= _data;
+	ffs->raw_descs		= raw_descs;
+	ffs->raw_descs_length	= data - raw_descs;
+	ffs->fs_descs_count	= counts[0];
+	ffs->hs_descs_count	= counts[1];
+	ffs->ss_descs_count	= counts[2];
 
 	return 0;
 
-einval:
-	ret = -EINVAL;
 error:
 	kfree(_data);
 	return ret;
@@ -1789,7 +2102,7 @@ static void __ffs_event_add(struct ffs_data *ffs,
 	 * the source does nothing.
 	 */
 	if (ffs->setup_state == FFS_SETUP_PENDING)
-		ffs->setup_state = FFS_SETUP_CANCELED;
+		ffs->setup_state = FFS_SETUP_CANCELLED;
 
 	switch (type) {
 	case FUNCTIONFS_RESUME:
@@ -1850,21 +2163,28 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	struct usb_endpoint_descriptor *ds = (void *)desc;
 	struct ffs_function *func = priv;
 	struct ffs_ep *ffs_ep;
-
-	/*
-	 * If hs_descriptors is not NULL then we are reading hs
-	 * descriptors now
-	 */
-	const int isHS = func->function.hs_descriptors != NULL;
-	unsigned idx;
+	unsigned ep_desc_id, idx;
+	static const char *speed_names[] = { "full", "high", "super" };
 
 	if (type != FFS_DESCRIPTOR)
 		return 0;
 
-	if (isHS)
+	/*
+	 * If ss_descriptors is not NULL, we are reading super speed
+	 * descriptors; if hs_descriptors is not NULL, we are reading high
+	 * speed descriptors; otherwise, we are reading full speed
+	 * descriptors.
+	 */
+	if (func->function.ss_descriptors) {
+		ep_desc_id = 2;
+		func->function.ss_descriptors[(long)valuep] = desc;
+	} else if (func->function.hs_descriptors) {
+		ep_desc_id = 1;
 		func->function.hs_descriptors[(long)valuep] = desc;
-	else
+	} else {
+		ep_desc_id = 0;
 		func->function.fs_descriptors[(long)valuep]    = desc;
+	}
 
 	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
 		return 0;
@@ -1872,13 +2192,13 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1;
 	ffs_ep = func->eps + idx;
 
-	if (unlikely(ffs_ep->descs[isHS])) {
-		pr_vdebug("two %sspeed descriptors for EP %d\n",
-			  isHS ? "high" : "full",
+	if (unlikely(ffs_ep->descs[ep_desc_id])) {
+		pr_err("two %sspeed descriptors for EP %d\n",
+			  speed_names[ep_desc_id],
 			  ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 		return -EINVAL;
 	}
-	ffs_ep->descs[isHS] = ds;
+	ffs_ep->descs[ep_desc_id] = ds;
 
 	ffs_dump_mem(": Original  ep desc", ds, ds->bLength);
 	if (ffs_ep->ep) {
@@ -2022,8 +2342,10 @@ static int _ffs_func_bind(struct usb_configuration *c,
 	const int full = !!func->ffs->fs_descs_count;
 	const int high = gadget_is_dualspeed(func->gadget) &&
 		func->ffs->hs_descs_count;
+	const int super = gadget_is_superspeed(func->gadget) &&
+		func->ffs->ss_descs_count;
 
-	int ret;
+	int fs_len, hs_len, ret;
 
 	/* Make it a single chunk, less management later on */
 	vla_group(d);
@@ -2032,15 +2354,16 @@ static int _ffs_func_bind(struct usb_configuration *c,
 		full ? ffs->fs_descs_count + 1 : 0);
 	vla_item_with_sz(d, struct usb_descriptor_header *, hs_descs,
 		high ? ffs->hs_descs_count + 1 : 0);
+	vla_item_with_sz(d, struct usb_descriptor_header *, ss_descs,
+		super ? ffs->ss_descs_count + 1 : 0);
 	vla_item_with_sz(d, short, inums, ffs->interfaces_count);
-	vla_item_with_sz(d, char, raw_descs,
-		high ? ffs->raw_descs_length : ffs->raw_fs_descs_length);
+	vla_item_with_sz(d, char, raw_descs, ffs->raw_descs_length);
 	char *vlabuf;
 
 	ENTER();
 
-	/* Only high speed but not supported by gadget? */
-	if (unlikely(!(full | high)))
+	/* Has descriptors only for speeds gadget does not support */
+	if (unlikely(!(full | high | super)))
 		return -ENOTSUPP;
 
 	/* Allocate a single chunk, less management later on */
@@ -2050,8 +2373,10 @@ static int _ffs_func_bind(struct usb_configuration *c,
 
 	/* Zero */
 	memset(vla_ptr(vlabuf, d, eps), 0, d_eps__sz);
-	memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs + 16,
-	       d_raw_descs__sz);
+	/* Copy descriptors  */
+	memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs,
+	       ffs->raw_descs_length);
+
 	memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz);
 	for (ret = ffs->eps_count; ret; --ret) {
 		struct ffs_ep *ptr;
@@ -2073,22 +2398,38 @@ static int _ffs_func_bind(struct usb_configuration *c,
 	 */
 	if (likely(full)) {
 		func->function.fs_descriptors = vla_ptr(vlabuf, d, fs_descs);
-		ret = ffs_do_descs(ffs->fs_descs_count,
-				   vla_ptr(vlabuf, d, raw_descs),
-				   d_raw_descs__sz,
-				   __ffs_func_bind_do_descs, func);
-		if (unlikely(ret < 0))
+		fs_len = ffs_do_descs(ffs->fs_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs),
+				      d_raw_descs__sz,
+				      __ffs_func_bind_do_descs, func);
+		if (unlikely(fs_len < 0)) {
+			ret = fs_len;
 			goto error;
+		}
 	} else {
-		ret = 0;
+		fs_len = 0;
 	}
 
 	if (likely(high)) {
 		func->function.hs_descriptors = vla_ptr(vlabuf, d, hs_descs);
-		ret = ffs_do_descs(ffs->hs_descs_count,
-				   vla_ptr(vlabuf, d, raw_descs) + ret,
-				   d_raw_descs__sz - ret,
-				   __ffs_func_bind_do_descs, func);
+		hs_len = ffs_do_descs(ffs->hs_descs_count,
+				      vla_ptr(vlabuf, d, raw_descs) + fs_len,
+				      d_raw_descs__sz - fs_len,
+				      __ffs_func_bind_do_descs, func);
+		if (unlikely(hs_len < 0)) {
+			ret = hs_len;
+			goto error;
+		}
+	} else {
+		hs_len = 0;
+	}
+
+	if (likely(super)) {
+		func->function.ss_descriptors = vla_ptr(vlabuf, d, ss_descs);
+		ret = ffs_do_descs(ffs->ss_descs_count,
+				vla_ptr(vlabuf, d, raw_descs) + fs_len + hs_len,
+				d_raw_descs__sz - fs_len - hs_len,
+				__ffs_func_bind_do_descs, func);
 		if (unlikely(ret < 0))
 			goto error;
 	}
@@ -2099,7 +2440,8 @@ static int _ffs_func_bind(struct usb_configuration *c,
 	 * now.
 	 */
 	ret = ffs_do_descs(ffs->fs_descs_count +
-			   (high ? ffs->hs_descs_count : 0),
+			   (high ? ffs->hs_descs_count : 0) +
+			   (super ? ffs->ss_descs_count : 0),
 			   vla_ptr(vlabuf, d, raw_descs), d_raw_descs__sz,
 			   __ffs_func_bind_do_nums, func);
 	if (unlikely(ret < 0))
@@ -2258,7 +2600,7 @@ static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf)
 
 static LIST_HEAD(ffs_devices);
 
-static struct ffs_dev *_ffs_find_dev(const char *name)
+static struct ffs_dev *_ffs_do_find_dev(const char *name)
 {
 	struct ffs_dev *dev;
 
@@ -2275,7 +2617,7 @@ static struct ffs_dev *_ffs_find_dev(const char *name)
 /*
  * ffs_lock must be taken by the caller of this function
  */
-static struct ffs_dev *ffs_get_single_dev(void)
+static struct ffs_dev *_ffs_get_single_dev(void)
 {
 	struct ffs_dev *dev;
 
@@ -2291,15 +2633,15 @@ static struct ffs_dev *ffs_get_single_dev(void)
 /*
  * ffs_lock must be taken by the caller of this function
  */
-static struct ffs_dev *ffs_find_dev(const char *name)
+static struct ffs_dev *_ffs_find_dev(const char *name)
 {
 	struct ffs_dev *dev;
 
-	dev = ffs_get_single_dev();
+	dev = _ffs_get_single_dev();
 	if (dev)
 		return dev;
 
-	return _ffs_find_dev(name);
+	return _ffs_do_find_dev(name);
 }
 
 /* Configfs support *********************************************************/
@@ -2335,7 +2677,7 @@ static void ffs_free_inst(struct usb_function_instance *f)
 
 	opts = to_f_fs_opts(f);
 	ffs_dev_lock();
-	ffs_free_dev(opts->dev);
+	_ffs_free_dev(opts->dev);
 	ffs_dev_unlock();
 	kfree(opts);
 }
@@ -2390,7 +2732,7 @@ static struct usb_function_instance *ffs_alloc_inst(void)
 	opts->func_inst.set_inst_name = ffs_set_inst_name;
 	opts->func_inst.free_func_inst = ffs_free_inst;
 	ffs_dev_lock();
-	dev = ffs_alloc_dev();
+	dev = _ffs_alloc_dev();
 	ffs_dev_unlock();
 	if (IS_ERR(dev)) {
 		kfree(opts);
@@ -2446,6 +2788,7 @@ static void ffs_func_unbind(struct usb_configuration *c,
 	 */
 	func->function.fs_descriptors = NULL;
 	func->function.hs_descriptors = NULL;
+	func->function.ss_descriptors = NULL;
 	func->interfaces_nums = NULL;
 
 	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
@@ -2478,12 +2821,12 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi)
 /*
  * ffs_lock must be taken by the caller of this function
  */
-struct ffs_dev *ffs_alloc_dev(void)
+static struct ffs_dev *_ffs_alloc_dev(void)
 {
 	struct ffs_dev *dev;
 	int ret;
 
-	if (ffs_get_single_dev())
+	if (_ffs_get_single_dev())
 			return ERR_PTR(-EBUSY);
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -2511,10 +2854,10 @@ static int _ffs_name_dev(struct ffs_dev *dev, const char *name)
 {
 	struct ffs_dev *existing;
 
-	existing = _ffs_find_dev(name);
+	existing = _ffs_do_find_dev(name);
 	if (existing)
 		return -EBUSY;
-	
+
 	dev->name = name;
 
 	return 0;
@@ -2555,7 +2898,7 @@ EXPORT_SYMBOL(ffs_single_dev);
 /*
  * ffs_lock must be taken by the caller of this function
  */
-void ffs_free_dev(struct ffs_dev *dev)
+static void _ffs_free_dev(struct ffs_dev *dev)
 {
 	list_del(&dev->entry);
 	if (dev->name_allocated)
@@ -2572,7 +2915,7 @@ static void *ffs_acquire_dev(const char *dev_name)
 	ENTER();
 	ffs_dev_lock();
 
-	ffs_dev = ffs_find_dev(dev_name);
+	ffs_dev = _ffs_find_dev(dev_name);
 	if (!ffs_dev)
 		ffs_dev = ERR_PTR(-ENODEV);
 	else if (ffs_dev->mounted)
@@ -2595,11 +2938,12 @@ static void ffs_release_dev(struct ffs_data *ffs_data)
 	ffs_dev_lock();
 
 	ffs_dev = ffs_data->private_data;
-	if (ffs_dev)
+	if (ffs_dev) {
 		ffs_dev->mounted = false;
-	
-	if (ffs_dev->ffs_release_dev_callback)
-		ffs_dev->ffs_release_dev_callback(ffs_dev);
+
+		if (ffs_dev->ffs_release_dev_callback)
+			ffs_dev->ffs_release_dev_callback(ffs_dev);
+	}
 
 	ffs_dev_unlock();
 }
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index f1a59190ac9a..df4a0dcbc993 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -276,7 +276,7 @@ static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	}
 
 	net = gether_connect(&geth->port);
-	return IS_ERR(net) ? PTR_ERR(net) : 0;
+	return PTR_RET(net);
 }
 
 static void geth_disable(struct usb_function *f)
diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c
index 914cbd84ee40..f984ee75324d 100644
--- a/drivers/usb/gadget/gr_udc.c
+++ b/drivers/usb/gadget/gr_udc.c
@@ -225,14 +225,8 @@ static void gr_dfs_create(struct gr_udc *dev)
 	const char *name = "gr_udc_state";
 
 	dev->dfs_root = debugfs_create_dir(dev_name(dev->dev), NULL);
-	if (IS_ERR(dev->dfs_root)) {
-		dev_err(dev->dev, "Failed to create debugfs directory\n");
-		return;
-	}
-	dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root,
-					     dev, &gr_dfs_fops);
-	if (IS_ERR(dev->dfs_state))
-		dev_err(dev->dev, "Failed to create debugfs file %s\n", name);
+	dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, dev,
+					     &gr_dfs_fops);
 }
 
 static void gr_dfs_delete(struct gr_udc *dev)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index b94c049ab0d0..b5be6f0308c2 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -439,11 +439,9 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	/* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */
 
 	value = -ENOMEM;
-	kbuf = kmalloc (len, GFP_KERNEL);
-	if (!kbuf)
-		goto free1;
-	if (copy_from_user (kbuf, buf, len)) {
-		value = -EFAULT;
+	kbuf = memdup_user(buf, len);
+	if (!kbuf) {
+		value = PTR_ERR(kbuf);
 		goto free1;
 	}
 
@@ -452,7 +450,6 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		data->name, len, (int) value);
 free1:
 	mutex_unlock(&data->lock);
-	kfree (kbuf);
 	return value;
 }
 
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 049ebab0d360..a139894c600f 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -3295,9 +3295,9 @@ usb_clk_enable_fail:
 pll_set_fail:
 	clk_disable(udc->usb_pll_clk);
 pll_enable_fail:
-	clk_put(udc->usb_slv_clk);
-usb_otg_clk_get_fail:
 	clk_put(udc->usb_otg_clk);
+usb_otg_clk_get_fail:
+	clk_put(udc->usb_slv_clk);
 usb_clk_get_fail:
 	clk_put(udc->usb_pll_clk);
 pll_get_fail:
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 69b76efd11e9..6474081dcbaf 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -427,12 +427,17 @@ setup_rx_reqs(struct printer_dev *dev)
 		req->length = USB_BUFSIZE;
 		req->complete = rx_complete;
 
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
 		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
 		if (error) {
 			DBG(dev, "rx submit --> %d\n", error);
 			list_add(&req->list, &dev->rx_reqs);
 			break;
-		} else {
+		}
+		/* if the req is empty, then add it into dev->rx_reqs_active. */
+		else if (list_empty(&req->list)) {
 			list_add(&req->list, &dev->rx_reqs_active);
 		}
 	}
@@ -1133,6 +1138,7 @@ static int __init printer_bind_config(struct usb_configuration *c)
 				  NULL, "g_printer");
 	if (IS_ERR(dev->pdev)) {
 		ERROR(dev, "Failed to create device: g_printer\n");
+		status = PTR_ERR(dev->pdev);
 		goto fail;
 	}
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 1172eaeddd85..2a9cb674926a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -617,7 +617,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	to_write = DIV_ROUND_UP(to_write, 4);
 	data = hs_req->req.buf + buf_pos;
 
-	writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write);
+	iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write);
 
 	return (to_write >= can_write) ? -ENOSPC : 0;
 }
@@ -720,8 +720,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		ureq->length, ureq->actual);
 	if (0)
 		dev_dbg(hsotg->dev,
-			"REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
-			ureq->buf, length, ureq->dma,
+			"REQ buf %p len %d dma 0x%pad noi=%d zp=%d snok=%d\n",
+			ureq->buf, length, &ureq->dma,
 			ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
 
 	maxreq = get_ep_limit(hs_ep);
@@ -789,8 +789,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
 		writel(ureq->dma, hsotg->regs + dma_reg);
 
-		dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
-			__func__, ureq->dma, dma_reg);
+		dev_dbg(hsotg->dev, "%s: 0x%pad => 0x%08x\n",
+			__func__, &ureq->dma, dma_reg);
 	}
 
 	ctrl |= DxEPCTL_EPEna;	/* ensure ep enabled */
@@ -1186,6 +1186,41 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
 static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
 
 /**
+ * s3c_hsotg_stall_ep0 - stall ep0
+ * @hsotg: The device state
+ *
+ * Set stall for ep0 as response for setup request.
+ */
+static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) {
+	struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+	u32 reg;
+	u32 ctrl;
+
+	dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+	reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
+
+	/*
+	 * DxEPCTL_Stall will be cleared by EP once it has
+	 * taken effect, so no need to clear later.
+	 */
+
+	ctrl = readl(hsotg->regs + reg);
+	ctrl |= DxEPCTL_Stall;
+	ctrl |= DxEPCTL_CNAK;
+	writel(ctrl, hsotg->regs + reg);
+
+	dev_dbg(hsotg->dev,
+		"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+		ctrl, reg, readl(hsotg->regs + reg));
+
+	 /*
+	  * complete won't be called, so we enqueue
+	  * setup request here
+	  */
+	 s3c_hsotg_enqueue_setup(hsotg);
+}
+
+/**
  * s3c_hsotg_process_control - process a control request
  * @hsotg: The device state
  * @ctrl: The control request received
@@ -1262,38 +1297,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 	 * so respond with a STALL for the status stage to indicate failure.
 	 */
 
-	if (ret < 0) {
-		u32 reg;
-		u32 ctrl;
-
-		dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
-		reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
-
-		/*
-		 * DxEPCTL_Stall will be cleared by EP once it has
-		 * taken effect, so no need to clear later.
-		 */
-
-		ctrl = readl(hsotg->regs + reg);
-		ctrl |= DxEPCTL_Stall;
-		ctrl |= DxEPCTL_CNAK;
-		writel(ctrl, hsotg->regs + reg);
-
-		dev_dbg(hsotg->dev,
-			"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
-			ctrl, reg, readl(hsotg->regs + reg));
-
-		/*
-		 * don't believe we need to anything more to get the EP
-		 * to reply with a STALL packet
-		 */
-
-		 /*
-		  * complete won't be called, so we enqueue
-		  * setup request here
-		  */
-		 s3c_hsotg_enqueue_setup(hsotg);
-	}
+	if (ret < 0)
+		s3c_hsotg_stall_ep0(hsotg);
 }
 
 /**
@@ -1488,7 +1493,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	 * note, we might over-write the buffer end by 3 bytes depending on
 	 * alignment of the data.
 	 */
-	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
+	ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read);
 }
 
 /**
@@ -2832,6 +2837,15 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
+	if (index == 0) {
+		if (value)
+			s3c_hsotg_stall_ep0(hs);
+		else
+			dev_warn(hs->dev,
+				 "%s: can't clear halt on ep0\n", __func__);
+		return 0;
+	}
+
 	/* write both IN and OUT control registers */
 
 	epreg = DIEPCTL(index);
@@ -3760,10 +3774,55 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#if 1
-#define s3c_hsotg_suspend NULL
-#define s3c_hsotg_resume NULL
-#endif
+static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
+	unsigned long flags;
+	int ret = 0;
+
+	if (hsotg->driver)
+		dev_info(hsotg->dev, "suspending usb gadget %s\n",
+			 hsotg->driver->driver.name);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	s3c_hsotg_disconnect(hsotg);
+	s3c_hsotg_phy_disable(hsotg);
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (hsotg->driver) {
+		int ep;
+		for (ep = 0; ep < hsotg->num_of_eps; ep++)
+			s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+
+		ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+					     hsotg->supplies);
+	}
+
+	return ret;
+}
+
+static int s3c_hsotg_resume(struct platform_device *pdev)
+{
+	struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
+	unsigned long flags;
+	int ret = 0;
+
+	if (hsotg->driver) {
+		dev_info(hsotg->dev, "resuming usb gadget %s\n",
+			 hsotg->driver->driver.name);
+		ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				      hsotg->supplies);
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	hsotg->last_rst = jiffies;
+	s3c_hsotg_phy_enable(hsotg);
+	s3c_hsotg_core_init(hsotg);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return ret;
+}
 
 #ifdef CONFIG_OF
 static const struct of_device_id s3c_hsotg_of_ids[] = {
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index ea4bbfe72ec0..10c6a128250c 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1344,7 +1344,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	return 0;
 err_add_udc:
-err_add_device:
 	clk_disable(hsudc->uclk);
 err_res:
 	if (!IS_ERR_OR_NULL(hsudc->transceiver))
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 0f8aad78b54f..460c266b8e24 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1613,7 +1613,7 @@ static struct se_wwn *usbg_make_tport(
 		return ERR_PTR(-ENOMEM);
 	}
 	tport->tport_wwpn = wwpn;
-	snprintf(tport->tport_name, sizeof(tport->tport_name), wnn_name);
+	snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name);
 	return &tport->tport_wwn;
 }
 
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index b7d4f82872b7..50d09c289137 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -48,6 +48,8 @@
 
 #define UETH__VERSION	"29-May-2008"
 
+#define GETHER_NAPI_WEIGHT	32
+
 struct eth_dev {
 	/* lock is held while accessing port_usb
 	 */
@@ -72,6 +74,7 @@ struct eth_dev {
 						struct sk_buff_head *list);
 
 	struct work_struct	work;
+	struct napi_struct	rx_napi;
 
 	unsigned long		todo;
 #define	WORK_RX_MEMORY		0
@@ -253,18 +256,16 @@ enomem:
 		DBG(dev, "rx submit --> %d\n", retval);
 		if (skb)
 			dev_kfree_skb_any(skb);
-		spin_lock_irqsave(&dev->req_lock, flags);
-		list_add(&req->list, &dev->rx_reqs);
-		spin_unlock_irqrestore(&dev->req_lock, flags);
 	}
 	return retval;
 }
 
 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct sk_buff	*skb = req->context, *skb2;
+	struct sk_buff	*skb = req->context;
 	struct eth_dev	*dev = ep->driver_data;
 	int		status = req->status;
+	bool		rx_queue = 0;
 
 	switch (status) {
 
@@ -288,30 +289,8 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 		} else {
 			skb_queue_tail(&dev->rx_frames, skb);
 		}
-		skb = NULL;
-
-		skb2 = skb_dequeue(&dev->rx_frames);
-		while (skb2) {
-			if (status < 0
-					|| ETH_HLEN > skb2->len
-					|| skb2->len > VLAN_ETH_FRAME_LEN) {
-				dev->net->stats.rx_errors++;
-				dev->net->stats.rx_length_errors++;
-				DBG(dev, "rx length %d\n", skb2->len);
-				dev_kfree_skb_any(skb2);
-				goto next_frame;
-			}
-			skb2->protocol = eth_type_trans(skb2, dev->net);
-			dev->net->stats.rx_packets++;
-			dev->net->stats.rx_bytes += skb2->len;
-
-			/* no buffer copies needed, unless hardware can't
-			 * use skb buffers.
-			 */
-			status = netif_rx(skb2);
-next_frame:
-			skb2 = skb_dequeue(&dev->rx_frames);
-		}
+		if (!status)
+			rx_queue = 1;
 		break;
 
 	/* software-driven interface shutdown */
@@ -334,22 +313,20 @@ quiesce:
 		/* FALLTHROUGH */
 
 	default:
+		rx_queue = 1;
+		dev_kfree_skb_any(skb);
 		dev->net->stats.rx_errors++;
 		DBG(dev, "rx status %d\n", status);
 		break;
 	}
 
-	if (skb)
-		dev_kfree_skb_any(skb);
-	if (!netif_running(dev->net)) {
 clean:
 		spin_lock(&dev->req_lock);
 		list_add(&req->list, &dev->rx_reqs);
 		spin_unlock(&dev->req_lock);
-		req = NULL;
-	}
-	if (req)
-		rx_submit(dev, req, GFP_ATOMIC);
+
+	if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi)))
+		__napi_schedule(&dev->rx_napi);
 }
 
 static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
@@ -414,16 +391,24 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 {
 	struct usb_request	*req;
 	unsigned long		flags;
+	int			rx_counts = 0;
 
 	/* fill unused rxq slots with some skb */
 	spin_lock_irqsave(&dev->req_lock, flags);
 	while (!list_empty(&dev->rx_reqs)) {
+
+		if (++rx_counts > qlen(dev->gadget, dev->qmult))
+			break;
+
 		req = container_of(dev->rx_reqs.next,
 				struct usb_request, list);
 		list_del_init(&req->list);
 		spin_unlock_irqrestore(&dev->req_lock, flags);
 
 		if (rx_submit(dev, req, gfp_flags) < 0) {
+			spin_lock_irqsave(&dev->req_lock, flags);
+			list_add(&req->list, &dev->rx_reqs);
+			spin_unlock_irqrestore(&dev->req_lock, flags);
 			defer_kevent(dev, WORK_RX_MEMORY);
 			return;
 		}
@@ -433,6 +418,41 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 	spin_unlock_irqrestore(&dev->req_lock, flags);
 }
 
+static int gether_poll(struct napi_struct *napi, int budget)
+{
+	struct eth_dev  *dev = container_of(napi, struct eth_dev, rx_napi);
+	struct sk_buff	*skb;
+	unsigned int	work_done = 0;
+	int		status = 0;
+
+	while ((skb = skb_dequeue(&dev->rx_frames))) {
+		if (status < 0
+				|| ETH_HLEN > skb->len
+				|| skb->len > VLAN_ETH_FRAME_LEN) {
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_length_errors++;
+			DBG(dev, "rx length %d\n", skb->len);
+			dev_kfree_skb_any(skb);
+			continue;
+		}
+		skb->protocol = eth_type_trans(skb, dev->net);
+		dev->net->stats.rx_packets++;
+		dev->net->stats.rx_bytes += skb->len;
+
+		status = netif_rx_ni(skb);
+	}
+
+	if (netif_running(dev->net)) {
+		rx_fill(dev, GFP_KERNEL);
+		work_done++;
+	}
+
+	if (work_done < budget)
+		napi_complete(&dev->rx_napi);
+
+	return work_done;
+}
+
 static void eth_work(struct work_struct *work)
 {
 	struct eth_dev	*dev = container_of(work, struct eth_dev, work);
@@ -625,6 +645,7 @@ static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
 	/* and open the tx floodgates */
 	atomic_set(&dev->tx_qlen, 0);
 	netif_wake_queue(dev->net);
+	napi_enable(&dev->rx_napi);
 }
 
 static int eth_open(struct net_device *net)
@@ -651,6 +672,7 @@ static int eth_stop(struct net_device *net)
 	unsigned long	flags;
 
 	VDBG(dev, "%s\n", __func__);
+	napi_disable(&dev->rx_napi);
 	netif_stop_queue(net);
 
 	DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
@@ -768,6 +790,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 		return ERR_PTR(-ENOMEM);
 
 	dev = netdev_priv(net);
+	netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
 	spin_lock_init(&dev->lock);
 	spin_lock_init(&dev->req_lock);
 	INIT_WORK(&dev->work, eth_work);
@@ -830,6 +853,7 @@ struct net_device *gether_setup_name_default(const char *netname)
 		return ERR_PTR(-ENOMEM);
 
 	dev = netdev_priv(net);
+	netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
 	spin_lock_init(&dev->lock);
 	spin_lock_init(&dev->req_lock);
 	INIT_WORK(&dev->work, eth_work);
@@ -1113,6 +1137,7 @@ void gether_disconnect(struct gether *link)
 {
 	struct eth_dev		*dev = link->ioport;
 	struct usb_request	*req;
+	struct sk_buff		*skb;
 
 	WARN_ON(!dev);
 	if (!dev)
@@ -1139,6 +1164,12 @@ void gether_disconnect(struct gether *link)
 		spin_lock(&dev->req_lock);
 	}
 	spin_unlock(&dev->req_lock);
+
+	spin_lock(&dev->rx_frames.lock);
+	while ((skb = __skb_dequeue(&dev->rx_frames)))
+		dev_kfree_skb_any(skb);
+	spin_unlock(&dev->rx_frames.lock);
+
 	link->in_ep->driver_data = NULL;
 	link->in_ep->desc = NULL;
 
diff --git a/drivers/usb/gadget/u_fs.h b/drivers/usb/gadget/u_fs.h
index bc2d3718219b..bf0ba375d459 100644
--- a/drivers/usb/gadget/u_fs.h
+++ b/drivers/usb/gadget/u_fs.h
@@ -65,10 +65,8 @@ static inline void ffs_dev_unlock(void)
 	mutex_unlock(&ffs_lock);
 }
 
-struct ffs_dev *ffs_alloc_dev(void);
 int ffs_name_dev(struct ffs_dev *dev, const char *name);
 int ffs_single_dev(struct ffs_dev *dev);
-void ffs_free_dev(struct ffs_dev *dev);
 
 struct ffs_epfile;
 struct ffs_function;
@@ -125,7 +123,7 @@ enum ffs_setup_state {
 	 * setup.  If this state is set read/write on ep0 return
 	 * -EIDRM.  This state is only set when adding event.
 	 */
-	FFS_SETUP_CANCELED
+	FFS_SETUP_CANCELLED
 };
 
 struct ffs_data {
@@ -156,7 +154,6 @@ struct ffs_data {
 	 */
 	struct usb_request		*ep0req;		/* P: mutex */
 	struct completion		ep0req_completion;	/* P: mutex */
-	int				ep0req_status;		/* P: mutex */
 
 	/* reference counter */
 	atomic_t			ref;
@@ -168,19 +165,18 @@ struct ffs_data {
 
 	/*
 	 * Possible transitions:
-	 * + FFS_NO_SETUP       -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
+	 * + FFS_NO_SETUP        -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
 	 *               happens only in ep0 read which is P: mutex
-	 * + FFS_SETUP_PENDING  -> FFS_NO_SETUP       -- P: ev.waitq.lock
+	 * + FFS_SETUP_PENDING   -> FFS_NO_SETUP       -- P: ev.waitq.lock
 	 *               happens only in ep0 i/o  which is P: mutex
-	 * + FFS_SETUP_PENDING  -> FFS_SETUP_CANCELED -- P: ev.waitq.lock
-	 * + FFS_SETUP_CANCELED -> FFS_NO_SETUP       -- cmpxchg
+	 * + FFS_SETUP_PENDING   -> FFS_SETUP_CANCELLED -- P: ev.waitq.lock
+	 * + FFS_SETUP_CANCELLED -> FFS_NO_SETUP        -- cmpxchg
+	 *
+	 * This field should never be accessed directly and instead
+	 * ffs_setup_state_clear_cancelled function should be used.
 	 */
 	enum ffs_setup_state		setup_state;
 
-#define FFS_SETUP_STATE(ffs)					\
-	((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state,	\
-				       FFS_SETUP_CANCELED, FFS_NO_SETUP))
-
 	/* Events & such. */
 	struct {
 		u8				types[4];
@@ -210,16 +206,16 @@ struct ffs_data {
 
 	/* filled by __ffs_data_got_descs() */
 	/*
-	 * Real descriptors are 16 bytes after raw_descs (so you need
-	 * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the
-	 * first full speed descriptor).  raw_descs_length and
-	 * raw_fs_descs_length do not have those 16 bytes added.
+	 * raw_descs is what you kfree, real_descs points inside of raw_descs,
+	 * where full speed, high speed and super speed descriptors start.
+	 * real_descs_length is the length of all those descriptors.
 	 */
+	const void			*raw_descs_data;
 	const void			*raw_descs;
 	unsigned			raw_descs_length;
-	unsigned			raw_fs_descs_length;
 	unsigned			fs_descs_count;
 	unsigned			hs_descs_count;
+	unsigned			ss_descs_count;
 
 	unsigned short			strings_count;
 	unsigned short			interfaces_count;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0b..e22b82660831 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -584,7 +584,6 @@ config FHCI_DEBUG
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
 	depends on USB_FTDI_ELAN
-	default M
 	help
 	  The U132 adapter is a USB to CardBus adapter specifically designed
 	  for PC cards that contain an OHCI host controller. Typical PC cards
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 01536cfd361d..b3a0e11073aa 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Steven Brown <sbrown@cortland.com>
  * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  *
  * Derived from the ohci-ssb driver
  * Copyright 2007 Michael Buesch <m@bues.ch>
@@ -18,6 +19,7 @@
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
+#include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -25,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -33,6 +36,13 @@
 #include "ehci.h"
 
 #define DRIVER_DESC "EHCI generic platform driver"
+#define EHCI_MAX_CLKS 3
+#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+struct ehci_platform_priv {
+	struct clk *clks[EHCI_MAX_CLKS];
+	struct phy *phy;
+};
 
 static const char hcd_name[] = "ehci-platform";
 
@@ -45,8 +55,6 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 
 	hcd->has_tt = pdata->has_tt;
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-	ehci->big_endian_desc = pdata->big_endian_desc;
-	ehci->big_endian_mmio = pdata->big_endian_mmio;
 
 	if (pdata->pre_setup) {
 		retval = pdata->pre_setup(hcd);
@@ -64,38 +72,91 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ehci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	if (priv->phy) {
+		ret = phy_init(priv->phy);
+		if (ret)
+			goto err_disable_clks;
+
+		ret = phy_power_on(priv->phy);
+		if (ret)
+			goto err_exit_phy;
+	}
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ehci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	if (priv->phy) {
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
 static struct hc_driver __read_mostly ehci_platform_hc_driver;
 
 static const struct ehci_driver_overrides platform_overrides __initconst = {
-	.reset =	ehci_platform_reset,
+	.reset =		ehci_platform_reset,
+	.extra_priv_size =	sizeof(struct ehci_platform_priv),
 };
 
-static struct usb_ehci_pdata ehci_platform_defaults;
+static struct usb_ehci_pdata ehci_platform_defaults = {
+	.power_on =		ehci_platform_power_on,
+	.power_suspend =	ehci_platform_power_off,
+	.power_off =		ehci_platform_power_off,
+};
 
 static int ehci_platform_probe(struct platform_device *dev)
 {
 	struct usb_hcd *hcd;
 	struct resource *res_mem;
-	struct usb_ehci_pdata *pdata;
-	int irq;
-	int err;
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv;
+	struct ehci_hcd *ehci;
+	int err, irq, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
 
 	/*
-	 * use reasonable defaults so platforms don't have to provide these.
-	 * with DT probing on ARM, none of these are set.
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
 	 */
-	if (!dev_get_platdata(&dev->dev))
-		dev->dev.platform_data = &ehci_platform_defaults;
+	if (!pdata)
+		pdata = &ehci_platform_defaults;
 
 	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
 	if (err)
 		return err;
 
-	pdata = dev_get_platdata(&dev->dev);
-
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "no irq provided");
@@ -107,17 +168,72 @@ static int ehci_platform_probe(struct platform_device *dev)
 		return -ENXIO;
 	}
 
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+			     dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ehci_priv(hcd);
+	ehci = hcd_to_ehci(hcd);
+
+	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ehci->big_endian_mmio = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ehci->big_endian_desc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
+
+		priv->phy = devm_phy_get(&dev->dev, "usb");
+		if (IS_ERR(priv->phy)) {
+			err = PTR_ERR(priv->phy);
+			if (err == -EPROBE_DEFER)
+				goto err_put_hcd;
+			priv->phy = NULL;
+		}
+
+		for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
+	if (pdata->big_endian_desc)
+		ehci->big_endian_desc = 1;
+	if (pdata->big_endian_mmio)
+		ehci->big_endian_mmio = 1;
+
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	if (ehci->big_endian_mmio) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n");
+		err = -EINVAL;
+		goto err_put_clks;
+	}
+#endif
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+	if (ehci->big_endian_desc) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n");
+		err = -EINVAL;
+		goto err_put_clks;
+	}
+#endif
+
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
-			return err;
-	}
-
-	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-			     dev_name(&dev->dev));
-	if (!hcd) {
-		err = -ENOMEM;
-		goto err_power;
+			goto err_put_clks;
 	}
 
 	hcd->rsrc_start = res_mem->start;
@@ -126,22 +242,28 @@ static int ehci_platform_probe(struct platform_device *dev)
 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
+		goto err_power;
 	}
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_put_hcd;
+		goto err_power;
 
 	device_wakeup_enable(hcd->self.controller);
 	platform_set_drvdata(dev, hcd);
 
 	return err;
 
-err_put_hcd:
-	usb_put_hcd(hcd);
 err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
 
 	return err;
 }
@@ -150,13 +272,19 @@ static int ehci_platform_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
 	if (pdata == &ehci_platform_defaults)
 		dev->dev.platform_data = NULL;
 
@@ -207,8 +335,10 @@ static int ehci_platform_resume(struct device *dev)
 static const struct of_device_id vt8500_ehci_ids[] = {
 	{ .compatible = "via,vt8500-ehci", },
 	{ .compatible = "wm,prizm-ehci", },
+	{ .compatible = "generic-ehci", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
 
 static const struct platform_device_id ehci_platform_table[] = {
 	{ "ehci-platform", 0 },
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index af28b748e87a..27ac6ad53c3d 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -38,10 +38,6 @@
 
 #include "ehci.h"
 
-#define TEGRA_USB_BASE			0xC5000000
-#define TEGRA_USB2_BASE			0xC5004000
-#define TEGRA_USB3_BASE			0xC5008000
-
 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 
 #define TEGRA_USB_DMA_ALIGN 32
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index e07669993f58..d0d8fadf7066 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -261,8 +261,44 @@ static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc)
 		dev_err(dev, "cannot listen to notifications: %d\n", result);
 		goto error_stop;
 	}
+	/*
+	 * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set,
+	 *  disable transfer notifications.
+	 */
+	if (hwahc->wa.quirks &
+		WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) {
+		struct usb_host_interface *cur_altsetting =
+			hwahc->wa.usb_iface->cur_altsetting;
+
+		result = usb_control_msg(hwahc->wa.usb_dev,
+				usb_sndctrlpipe(hwahc->wa.usb_dev, 0),
+				WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS,
+				USB_DIR_OUT | USB_TYPE_VENDOR |
+					USB_RECIP_INTERFACE,
+				WA_REQ_ALEREON_FEATURE_SET,
+				cur_altsetting->desc.bInterfaceNumber,
+				NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+		/*
+		 * If we successfully sent the control message, start DTI here
+		 * because no transfer notifications will be received which is
+		 * where DTI is normally started.
+		 */
+		if (result == 0)
+			result = wa_dti_start(&hwahc->wa);
+		else
+			result = 0;	/* OK.  Continue normally. */
+
+		if (result < 0) {
+			dev_err(dev, "cannot start DTI: %d\n", result);
+			goto error_dti_start;
+		}
+	}
+
 	return result;
 
+error_dti_start:
+	wa_nep_disarm(&hwahc->wa);
 error_stop:
 	__wa_clear_feature(&hwahc->wa, WA_ENABLE);
 	return result;
@@ -827,10 +863,12 @@ static void hwahc_disconnect(struct usb_interface *usb_iface)
 static struct usb_device_id hwahc_id_table[] = {
 	/* Alereon 5310 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01),
-	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC },
+	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC |
+		WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS },
 	/* Alereon 5611 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01),
-	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC },
+	  .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC |
+		WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS },
 	/* FIXME: use class labels for this */
 	{ USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
 	{},
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 68f674cd095f..b6002c951c5c 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Michael Buesch <m@bues.ch>
  * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  *
  * Derived from the OCHI-SSB driver
  * Derived from the OHCI-PCI driver
@@ -14,11 +15,14 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/hrtimer.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/usb.h>
@@ -27,6 +31,13 @@
 #include "ohci.h"
 
 #define DRIVER_DESC "OHCI generic platform driver"
+#define OHCI_MAX_CLKS 3
+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_platform_priv {
+	struct clk *clks[OHCI_MAX_CLKS];
+	struct phy *phy;
+};
 
 static const char hcd_name[] = "ohci-platform";
 
@@ -36,10 +47,6 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
-	if (pdata->big_endian_desc)
-		ohci->flags |= OHCI_QUIRK_BE_DESC;
-	if (pdata->big_endian_mmio)
-		ohci->flags |= OHCI_QUIRK_BE_MMIO;
 	if (pdata->no_big_frame_no)
 		ohci->flags |= OHCI_QUIRK_FRAME_NO;
 	if (pdata->num_ports)
@@ -48,11 +55,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
 	return ohci_setup(hcd);
 }
 
+static int ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	if (priv->phy) {
+		ret = phy_init(priv->phy);
+		if (ret)
+			goto err_disable_clks;
+
+		ret = phy_power_on(priv->phy);
+		if (ret)
+			goto err_exit_phy;
+	}
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	if (priv->phy) {
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
 static struct hc_driver __read_mostly ohci_platform_hc_driver;
 
 static const struct ohci_driver_overrides platform_overrides __initconst = {
-	.product_desc =	"Generic Platform OHCI controller",
-	.reset =	ohci_platform_reset,
+	.product_desc =		"Generic Platform OHCI controller",
+	.reset =		ohci_platform_reset,
+	.extra_priv_size =	sizeof(struct ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		ohci_platform_power_on,
+	.power_suspend =	ohci_platform_power_off,
+	.power_off =		ohci_platform_power_off,
 };
 
 static int ohci_platform_probe(struct platform_device *dev)
@@ -60,17 +123,24 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_hcd *hcd;
 	struct resource *res_mem;
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
-	int irq;
-	int err = -ENOMEM;
-
-	if (!pdata) {
-		WARN_ON(1);
-		return -ENODEV;
-	}
+	struct ohci_platform_priv *priv;
+	struct ohci_hcd *ohci;
+	int err, irq, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
+	 */
+	if (!pdata)
+		pdata = &ohci_platform_defaults;
+
+	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "no irq provided");
@@ -83,17 +153,72 @@ static int ohci_platform_probe(struct platform_device *dev)
 		return -ENXIO;
 	}
 
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+	ohci = hcd_to_ohci(hcd);
+
+	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ohci->flags |= OHCI_QUIRK_BE_DESC;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+		priv->phy = devm_phy_get(&dev->dev, "usb");
+		if (IS_ERR(priv->phy)) {
+			err = PTR_ERR(priv->phy);
+			if (err == -EPROBE_DEFER)
+				goto err_put_hcd;
+			priv->phy = NULL;
+		}
+
+		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
+	if (pdata->big_endian_desc)
+		ohci->flags |= OHCI_QUIRK_BE_DESC;
+	if (pdata->big_endian_mmio)
+		ohci->flags |= OHCI_QUIRK_BE_MMIO;
+
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+	if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_OHCI_BIG_ENDIAN_MMIO not set\n");
+		err = -EINVAL;
+		goto err_put_clks;
+	}
+#endif
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+	if (ohci->flags & OHCI_QUIRK_BE_DESC) {
+		dev_err(&dev->dev,
+			"Error: CONFIG_USB_OHCI_BIG_ENDIAN_DESC not set\n");
+		err = -EINVAL;
+		goto err_put_clks;
+	}
+#endif
+
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
-			return err;
-	}
-
-	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-			dev_name(&dev->dev));
-	if (!hcd) {
-		err = -ENOMEM;
-		goto err_power;
+			goto err_put_clks;
 	}
 
 	hcd->rsrc_start = res_mem->start;
@@ -102,11 +227,11 @@ static int ohci_platform_probe(struct platform_device *dev)
 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
+		goto err_power;
 	}
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_put_hcd;
+		goto err_power;
 
 	device_wakeup_enable(hcd->self.controller);
 
@@ -114,11 +239,17 @@ static int ohci_platform_probe(struct platform_device *dev)
 
 	return err;
 
-err_put_hcd:
-	usb_put_hcd(hcd);
 err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
 
 	return err;
 }
@@ -127,13 +258,22 @@ static int ohci_platform_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
 	return 0;
 }
 
@@ -180,6 +320,12 @@ static int ohci_platform_resume(struct device *dev)
 #define ohci_platform_resume	NULL
 #endif /* CONFIG_PM */
 
+static const struct of_device_id ohci_platform_ids[] = {
+	{ .compatible = "generic-ohci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
+
 static const struct platform_device_id ohci_platform_table[] = {
 	{ "ohci-platform", 0 },
 	{ }
@@ -200,6 +346,7 @@ static struct platform_driver ohci_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "ohci-platform",
 		.pm	= &ohci_platform_pm_ops,
+		.of_match_table = ohci_platform_ids,
 	}
 };
 
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 44e6c9da8892..01833ab2b5c3 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op)
 }
 
 static const struct of_device_id platform_uhci_ids[] = {
+	{ .compatible = "generic-uhci", },
 	{ .compatible = "platform-uhci", },
 	{}
 };
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 9992fbfec85f..1ad6bc1951c7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -732,9 +732,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		/* Set the U1 and U2 exit latencies. */
 		memcpy(buf, &usb_bos_descriptor,
 				USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
-		temp = readl(&xhci->cap_regs->hcs_params3);
-		buf[12] = HCS_U1_LATENCY(temp);
-		put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+		if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
+			temp = readl(&xhci->cap_regs->hcs_params3);
+			buf[12] = HCS_U1_LATENCY(temp);
+			put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+		}
 
 		/* Indicate whether the host has LTM support. */
 		temp = readl(&xhci->cap_regs->hcc_params);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index bce4391a0e7d..c089668308ad 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -149,14 +149,140 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	}
 }
 
+/*
+ * We need a radix tree for mapping physical addresses of TRBs to which stream
+ * ID they belong to.  We need to do this because the host controller won't tell
+ * us which stream ring the TRB came from.  We could store the stream ID in an
+ * event data TRB, but that doesn't help us for the cancellation case, since the
+ * endpoint may stop before it reaches that event data TRB.
+ *
+ * The radix tree maps the upper portion of the TRB DMA address to a ring
+ * segment that has the same upper portion of DMA addresses.  For example, say I
+ * have segments of size 1KB, that are always 1KB aligned.  A segment may
+ * start at 0x10c91000 and end at 0x10c913f0.  If I use the upper 10 bits, the
+ * key to the stream ID is 0x43244.  I can use the DMA address of the TRB to
+ * pass the radix tree a key to get the right stream ID:
+ *
+ *	0x10c90fff >> 10 = 0x43243
+ *	0x10c912c0 >> 10 = 0x43244
+ *	0x10c91400 >> 10 = 0x43245
+ *
+ * Obviously, only those TRBs with DMA addresses that are within the segment
+ * will make the radix tree return the stream ID for that ring.
+ *
+ * Caveats for the radix tree:
+ *
+ * The radix tree uses an unsigned long as a key pair.  On 32-bit systems, an
+ * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
+ * 64-bits.  Since we only request 32-bit DMA addresses, we can use that as the
+ * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
+ * PCI DMA addresses on a 64-bit system).  There might be a problem on 32-bit
+ * extended systems (where the DMA address can be bigger than 32-bits),
+ * if we allow the PCI dma mask to be bigger than 32-bits.  So don't do that.
+ */
+static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map,
+		struct xhci_ring *ring,
+		struct xhci_segment *seg,
+		gfp_t mem_flags)
+{
+	unsigned long key;
+	int ret;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	/* Skip any segments that were already added. */
+	if (radix_tree_lookup(trb_address_map, key))
+		return 0;
+
+	ret = radix_tree_maybe_preload(mem_flags);
+	if (ret)
+		return ret;
+	ret = radix_tree_insert(trb_address_map,
+			key, ring);
+	radix_tree_preload_end();
+	return ret;
+}
+
+static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map,
+		struct xhci_segment *seg)
+{
+	unsigned long key;
+
+	key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
+	if (radix_tree_lookup(trb_address_map, key))
+		radix_tree_delete(trb_address_map, key);
+}
+
+static int xhci_update_stream_segment_mapping(
+		struct radix_tree_root *trb_address_map,
+		struct xhci_ring *ring,
+		struct xhci_segment *first_seg,
+		struct xhci_segment *last_seg,
+		gfp_t mem_flags)
+{
+	struct xhci_segment *seg;
+	struct xhci_segment *failed_seg;
+	int ret;
+
+	if (WARN_ON_ONCE(trb_address_map == NULL))
+		return 0;
+
+	seg = first_seg;
+	do {
+		ret = xhci_insert_segment_mapping(trb_address_map,
+				ring, seg, mem_flags);
+		if (ret)
+			goto remove_streams;
+		if (seg == last_seg)
+			return 0;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return 0;
+
+remove_streams:
+	failed_seg = seg;
+	seg = first_seg;
+	do {
+		xhci_remove_segment_mapping(trb_address_map, seg);
+		if (seg == failed_seg)
+			return ret;
+		seg = seg->next;
+	} while (seg != first_seg);
+
+	return ret;
+}
+
+static void xhci_remove_stream_mapping(struct xhci_ring *ring)
+{
+	struct xhci_segment *seg;
+
+	if (WARN_ON_ONCE(ring->trb_address_map == NULL))
+		return;
+
+	seg = ring->first_seg;
+	do {
+		xhci_remove_segment_mapping(ring->trb_address_map, seg);
+		seg = seg->next;
+	} while (seg != ring->first_seg);
+}
+
+static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags)
+{
+	return xhci_update_stream_segment_mapping(ring->trb_address_map, ring,
+			ring->first_seg, ring->last_seg, mem_flags);
+}
+
 /* XXX: Do we need the hcd structure in all these functions? */
 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
 {
 	if (!ring)
 		return;
 
-	if (ring->first_seg)
+	if (ring->first_seg) {
+		if (ring->type == TYPE_STREAM)
+			xhci_remove_stream_mapping(ring);
 		xhci_free_segments_for_ring(xhci, ring->first_seg);
+	}
 
 	kfree(ring);
 }
@@ -349,6 +475,21 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	if (ret)
 		return -ENOMEM;
 
+	if (ring->type == TYPE_STREAM)
+		ret = xhci_update_stream_segment_mapping(ring->trb_address_map,
+						ring, first, last, flags);
+	if (ret) {
+		struct xhci_segment *next;
+		do {
+			next = first->next;
+			xhci_segment_free(xhci, first);
+			if (first == last)
+				break;
+			first = next;
+		} while (true);
+		return ret;
+	}
+
 	xhci_link_rings(xhci, ring, first, last, num_segs);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
 			"ring expansion succeed, now has %d segments",
@@ -434,12 +575,12 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
 		struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
 {
 	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs;
 
-	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		dma_free_coherent(dev,
-				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
+	if (size > MEDIUM_STREAM_ARRAY_SIZE)
+		dma_free_coherent(dev, size,
 				stream_ctx, dma);
-	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
+	else if (size <= SMALL_STREAM_ARRAY_SIZE)
 		return dma_pool_free(xhci->small_streams_pool,
 				stream_ctx, dma);
 	else
@@ -462,12 +603,12 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
 		gfp_t mem_flags)
 {
 	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs;
 
-	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		return dma_alloc_coherent(dev,
-				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
+	if (size > MEDIUM_STREAM_ARRAY_SIZE)
+		return dma_alloc_coherent(dev, size,
 				dma, mem_flags);
-	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
+	else if (size <= SMALL_STREAM_ARRAY_SIZE)
 		return dma_pool_alloc(xhci->small_streams_pool,
 				mem_flags, dma);
 	else
@@ -510,36 +651,6 @@ struct xhci_ring *xhci_stream_id_to_ring(
  * The number of stream contexts in the stream context array may be bigger than
  * the number of streams the driver wants to use.  This is because the number of
  * stream context array entries must be a power of two.
- *
- * We need a radix tree for mapping physical addresses of TRBs to which stream
- * ID they belong to.  We need to do this because the host controller won't tell
- * us which stream ring the TRB came from.  We could store the stream ID in an
- * event data TRB, but that doesn't help us for the cancellation case, since the
- * endpoint may stop before it reaches that event data TRB.
- *
- * The radix tree maps the upper portion of the TRB DMA address to a ring
- * segment that has the same upper portion of DMA addresses.  For example, say I
- * have segments of size 1KB, that are always 64-byte aligned.  A segment may
- * start at 0x10c91000 and end at 0x10c913f0.  If I use the upper 10 bits, the
- * key to the stream ID is 0x43244.  I can use the DMA address of the TRB to
- * pass the radix tree a key to get the right stream ID:
- *
- * 	0x10c90fff >> 10 = 0x43243
- * 	0x10c912c0 >> 10 = 0x43244
- * 	0x10c91400 >> 10 = 0x43245
- *
- * Obviously, only those TRBs with DMA addresses that are within the segment
- * will make the radix tree return the stream ID for that ring.
- *
- * Caveats for the radix tree:
- *
- * The radix tree uses an unsigned long as a key pair.  On 32-bit systems, an
- * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
- * 64-bits.  Since we only request 32-bit DMA addresses, we can use that as the
- * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
- * PCI DMA addresses on a 64-bit system).  There might be a problem on 32-bit
- * extended systems (where the DMA address can be bigger than 32-bits),
- * if we allow the PCI dma mask to be bigger than 32-bits.  So don't do that.
  */
 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		unsigned int num_stream_ctxs,
@@ -548,7 +659,6 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	struct xhci_stream_info *stream_info;
 	u32 cur_stream;
 	struct xhci_ring *cur_ring;
-	unsigned long key;
 	u64 addr;
 	int ret;
 
@@ -603,6 +713,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		if (!cur_ring)
 			goto cleanup_rings;
 		cur_ring->stream_id = cur_stream;
+		cur_ring->trb_address_map = &stream_info->trb_address_map;
 		/* Set deq ptr, cycle bit, and stream context type */
 		addr = cur_ring->first_seg->dma |
 			SCT_FOR_CTX(SCT_PRI_TR) |
@@ -612,10 +723,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
 				cur_stream, (unsigned long long) addr);
 
-		key = (unsigned long)
-			(cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT);
-		ret = radix_tree_insert(&stream_info->trb_address_map,
-				key, cur_ring);
+		ret = xhci_update_stream_mapping(cur_ring, mem_flags);
 		if (ret) {
 			xhci_ring_free(xhci, cur_ring);
 			stream_info->stream_rings[cur_stream] = NULL;
@@ -635,9 +743,6 @@ cleanup_rings:
 	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (cur_ring) {
-			addr = cur_ring->first_seg->dma;
-			radix_tree_delete(&stream_info->trb_address_map,
-					addr >> TRB_SEGMENT_SHIFT);
 			xhci_ring_free(xhci, cur_ring);
 			stream_info->stream_rings[cur_stream] = NULL;
 		}
@@ -698,7 +803,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
 {
 	int cur_stream;
 	struct xhci_ring *cur_ring;
-	dma_addr_t addr;
 
 	if (!stream_info)
 		return;
@@ -707,9 +811,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
 			cur_stream++) {
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (cur_ring) {
-			addr = cur_ring->first_seg->dma;
-			radix_tree_delete(&stream_info->trb_address_map,
-					addr >> TRB_SEGMENT_SHIFT);
 			xhci_ring_free(xhci, cur_ring);
 			stream_info->stream_rings[cur_stream] = NULL;
 		}
@@ -1711,7 +1812,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	if (xhci->lpm_command)
 		xhci_free_command(xhci, xhci->lpm_command);
-	xhci->cmd_ring_reserved_trbs = 0;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1776,6 +1876,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 
 no_bw:
+	xhci->cmd_ring_reserved_trbs = 0;
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	xhci->num_active_eps = 0;
@@ -2274,11 +2375,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/*
 	 * Initialize the ring segment pool.  The ring must be a contiguous
 	 * structure comprised of TRBs.  The TRBs must be 16 byte aligned,
-	 * however, the command ring segment needs 64-byte aligned segments,
-	 * so we pick the greater alignment need.
+	 * however, the command ring segment needs 64-byte aligned segments
+	 * and our use of dma addresses in the trb_address_map radix tree needs
+	 * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need.
 	 */
 	xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
-			TRB_SEGMENT_SIZE, 64, xhci->page_size);
+			TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size);
 
 	/* See Table 46 and Note on Figure 55 */
 	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 04f986d9234f..47390e369cd4 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -190,6 +190,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct usb_hcd *hcd;
 
 	driver = (struct hc_driver *)id->driver_data;
+
+	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
+	pm_runtime_get_noresume(&dev->dev);
+
 	/* Register the USB 2.0 roothub.
 	 * FIXME: USB core must know to register the USB 2.0 roothub first.
 	 * This is sort of silly, because we could just set the HCD driver flags
@@ -199,7 +203,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	retval = usb_hcd_pci_probe(dev, id);
 
 	if (retval)
-		return retval;
+		goto put_runtime_pm;
 
 	/* USB 2.0 roothub is stored in the PCI device now. */
 	hcd = dev_get_drvdata(&dev->dev);
@@ -222,11 +226,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto put_usb3_hcd;
 	/* Roothub already marked as USB 3.0 speed */
 
-	/* We know the LPM timeout algorithms for this host, let the USB core
-	 * enable and disable LPM for devices under the USB 3.0 roothub.
-	 */
-	if (xhci->quirks & XHCI_LPM_SUPPORT)
-		hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1;
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
+	pm_runtime_put_noidle(&dev->dev);
 
 	return 0;
 
@@ -234,6 +238,8 @@ put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
 dealloc_usb2_hcd:
 	usb_hcd_pci_remove(dev);
+put_runtime_pm:
+	pm_runtime_put_noidle(&dev->dev);
 	return retval;
 }
 
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 8abda5c73ca1..151901ce1ba9 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -158,6 +158,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	 */
 	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto put_usb3_hcd;
@@ -226,6 +229,7 @@ static const struct dev_pm_ops xhci_plat_pm_ops = {
 
 #ifdef CONFIG_OF
 static const struct of_device_id usb_xhci_of_match[] = {
+	{ .compatible = "generic-xhci" },
 	{ .compatible = "xhci-platform" },
 	{ },
 };
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 0ed64eb68e48..5f926bea5ab1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -546,9 +546,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
+	struct xhci_virt_ep *ep = &dev->eps[ep_index];
 	struct xhci_ring *ep_ring;
 	struct xhci_generic_trb *trb;
-	struct xhci_ep_ctx *ep_ctx;
 	dma_addr_t addr;
 
 	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
@@ -573,8 +573,16 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding endpoint context");
-	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
-	state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+	/* 4.6.9 the css flag is written to the stream context for streams */
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		struct xhci_stream_ctx *ctx =
+			&ep->stream_info->stream_ctx_array[stream_id];
+		state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring);
+	} else {
+		struct xhci_ep_ctx *ep_ctx
+			= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+		state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+	}
 
 	state->new_deq_ptr = cur_td->last_trb;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -892,6 +900,57 @@ remove_finished_td:
 	/* Return to the event handler with xhci->lock re-acquired */
 }
 
+static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	struct xhci_td *cur_td;
+
+	while (!list_empty(&ring->td_list)) {
+		cur_td = list_first_entry(&ring->td_list,
+				struct xhci_td, td_list);
+		list_del_init(&cur_td->td_list);
+		if (!list_empty(&cur_td->cancelled_td_list))
+			list_del_init(&cur_td->cancelled_td_list);
+		xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
+	}
+}
+
+static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
+		int slot_id, int ep_index)
+{
+	struct xhci_td *cur_td;
+	struct xhci_virt_ep *ep;
+	struct xhci_ring *ring;
+
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	if ((ep->ep_state & EP_HAS_STREAMS) ||
+			(ep->ep_state & EP_GETTING_NO_STREAMS)) {
+		int stream_id;
+
+		for (stream_id = 0; stream_id < ep->stream_info->num_streams;
+				stream_id++) {
+			xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+					"Killing URBs for slot ID %u, ep index %u, stream %u",
+					slot_id, ep_index, stream_id + 1);
+			xhci_kill_ring_urbs(xhci,
+					ep->stream_info->stream_rings[stream_id]);
+		}
+	} else {
+		ring = ep->ring;
+		if (!ring)
+			return;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"Killing URBs for slot ID %u, ep index %u",
+				slot_id, ep_index);
+		xhci_kill_ring_urbs(xhci, ring);
+	}
+	while (!list_empty(&ep->cancelled_td_list)) {
+		cur_td = list_first_entry(&ep->cancelled_td_list,
+				struct xhci_td, cancelled_td_list);
+		list_del_init(&cur_td->cancelled_td_list);
+		xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
+	}
+}
+
 /* Watchdog timer function for when a stop endpoint command fails to complete.
  * In this case, we assume the host controller is broken or dying or dead.  The
  * host may still be completing some other events, so we have to be careful to
@@ -915,9 +974,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 {
 	struct xhci_hcd *xhci;
 	struct xhci_virt_ep *ep;
-	struct xhci_virt_ep *temp_ep;
-	struct xhci_ring *ring;
-	struct xhci_td *cur_td;
 	int ret, i, j;
 	unsigned long flags;
 
@@ -974,34 +1030,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	for (i = 0; i < MAX_HC_SLOTS; i++) {
 		if (!xhci->devs[i])
 			continue;
-		for (j = 0; j < 31; j++) {
-			temp_ep = &xhci->devs[i]->eps[j];
-			ring = temp_ep->ring;
-			if (!ring)
-				continue;
-			xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-					"Killing URBs for slot ID %u, "
-					"ep index %u", i, j);
-			while (!list_empty(&ring->td_list)) {
-				cur_td = list_first_entry(&ring->td_list,
-						struct xhci_td,
-						td_list);
-				list_del_init(&cur_td->td_list);
-				if (!list_empty(&cur_td->cancelled_td_list))
-					list_del_init(&cur_td->cancelled_td_list);
-				xhci_giveback_urb_in_irq(xhci, cur_td,
-						-ESHUTDOWN);
-			}
-			while (!list_empty(&temp_ep->cancelled_td_list)) {
-				cur_td = list_first_entry(
-						&temp_ep->cancelled_td_list,
-						struct xhci_td,
-						cancelled_td_list);
-				list_del_init(&cur_td->cancelled_td_list);
-				xhci_giveback_urb_in_irq(xhci, cur_td,
-						-ESHUTDOWN);
-			}
-		}
+		for (j = 0; j < 31; j++)
+			xhci_kill_endpoint_urbs(xhci, i, j);
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -1073,17 +1103,18 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 	unsigned int stream_id;
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_device *dev;
+	struct xhci_virt_ep *ep;
 	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_slot_ctx *slot_ctx;
 
 	ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
 	stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
 	dev = xhci->devs[slot_id];
+	ep = &dev->eps[ep_index];
 
 	ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
 	if (!ep_ring) {
-		xhci_warn(xhci, "WARN Set TR deq ptr command for "
-				"freed stream ID %u\n",
+		xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
 				stream_id);
 		/* XXX: Harmless??? */
 		dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
@@ -1099,12 +1130,10 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 
 		switch (cmd_comp_code) {
 		case COMP_TRB_ERR:
-			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
-					"of stream ID configuration\n");
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
 			break;
 		case COMP_CTX_STATE:
-			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
-					"to incorrect slot or ep state.\n");
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
 			ep_state = le32_to_cpu(ep_ctx->ep_info);
 			ep_state &= EP_STATE_MASK;
 			slot_state = le32_to_cpu(slot_ctx->dev_state);
@@ -1114,13 +1143,12 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 					slot_state, ep_state);
 			break;
 		case COMP_EBADSLT:
-			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
-					"slot %u was not enabled.\n", slot_id);
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
+					slot_id);
 			break;
 		default:
-			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
-					"completion code of %u.\n",
-				  cmd_comp_code);
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
+					cmd_comp_code);
 			break;
 		}
 		/* OK what do we do now?  The endpoint state is hosed, and we
@@ -1130,23 +1158,28 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 		 * cancelling URBs, which might not be an error...
 		 */
 	} else {
+		u64 deq;
+		/* 4.6.10 deq ptr is written to the stream ctx for streams */
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			struct xhci_stream_ctx *ctx =
+				&ep->stream_info->stream_ctx_array[stream_id];
+			deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
+		} else {
+			deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
+		}
 		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-			"Successful Set TR Deq Ptr cmd, deq = @%08llx",
-			 le64_to_cpu(ep_ctx->deq));
-		if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg,
-					 dev->eps[ep_index].queued_deq_ptr) ==
-		    (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) {
+			"Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
+		if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
+					 ep->queued_deq_ptr) == deq) {
 			/* Update the ring's dequeue segment and dequeue pointer
 			 * to reflect the new position.
 			 */
 			update_ring_for_set_deq_completion(xhci, dev,
 				ep_ring, ep_index);
 		} else {
-			xhci_warn(xhci, "Mismatch between completed Set TR Deq "
-					"Ptr command & xHCI internal state.\n");
+			xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
 			xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
-					dev->eps[ep_index].queued_deq_seg,
-					dev->eps[ep_index].queued_deq_ptr);
+				  ep->queued_deq_seg, ep->queued_deq_ptr);
 		}
 	}
 
@@ -4070,6 +4103,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
 	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
 	u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
+	u32 trb_sct = 0;
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 	struct xhci_virt_ep *ep;
 
@@ -4088,7 +4122,9 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	}
 	ep->queued_deq_seg = deq_seg;
 	ep->queued_deq_ptr = deq_ptr;
-	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+	if (stream_id)
+		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
+	return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state,
 			upper_32_bits(addr), trb_stream_id,
 			trb_slot_id | trb_ep_index | type, false);
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 924a6ccdb622..8fe4e124ddd4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -390,6 +390,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 	}
 
  legacy_irq:
+	if (!strlen(hcd->irq_descr))
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+			 hcd->driver->description, hcd->self.busnum);
+
 	/* fall back to legacy interrupt*/
 	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
 			hcd->irq_descr, hcd);
@@ -2678,6 +2682,20 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	return ret;
 }
 
+static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci,
+	struct xhci_virt_device *vdev, int i)
+{
+	struct xhci_virt_ep *ep = &vdev->eps[i];
+
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n",
+				xhci_get_endpoint_address(i));
+		xhci_free_stream_info(xhci, ep->stream_info);
+		ep->stream_info = NULL;
+		ep->ep_state &= ~EP_HAS_STREAMS;
+	}
+}
+
 /* Called after one or more calls to xhci_add_endpoint() or
  * xhci_drop_endpoint().  If this call fails, the USB core is expected
  * to call xhci_reset_bandwidth().
@@ -2742,8 +2760,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Free any rings that were dropped, but not changed. */
 	for (i = 1; i < 31; ++i) {
 		if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
-		    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
+		    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) {
 			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+			xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+		}
 	}
 	xhci_zero_in_ctx(xhci, virt_dev);
 	/*
@@ -2759,6 +2779,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 		if (virt_dev->eps[i].ring) {
 			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
 		}
+		xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
 		virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
 		virt_dev->eps[i].new_ring = NULL;
 	}
@@ -2954,7 +2975,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
 	ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
 	if (ret <= 0)
 		return -EINVAL;
-	if (ep->ss_ep_comp.bmAttributes == 0) {
+	if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
 		xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
 				" descriptor for ep 0x%x does not support streams\n",
 				ep->desc.bEndpointAddress);
@@ -3121,6 +3142,12 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
 	xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
 			num_streams);
 
+	/* MaxPSASize value 0 (2 streams) means streams are not supported */
+	if (HCC_MAX_PSA(xhci->hcc_params) < 4) {
+		xhci_dbg(xhci, "xHCI controller does not support streams.\n");
+		return -ENOSYS;
+	}
+
 	config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
 	if (!config_cmd) {
 		xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
@@ -3519,6 +3546,8 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 		struct xhci_virt_ep *ep = &virt_dev->eps[i];
 
 		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n",
+					xhci_get_endpoint_address(i));
 			xhci_free_stream_info(xhci, ep->stream_info);
 			ep->stream_info = NULL;
 			ep->ep_state &= ~EP_HAS_STREAMS;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 58ed9d088e63..d280e9213d08 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -703,6 +703,7 @@ struct xhci_ep_ctx {
 
 /* deq bitmasks */
 #define EP_CTX_CYCLE_MASK		(1 << 0)
+#define SCTX_DEQ_MASK			(~0xfL)
 
 
 /**
@@ -1118,9 +1119,10 @@ enum xhci_setup_dev {
 #define TRB_TO_SUSPEND_PORT(p)		(((p) & (1 << 23)) >> 23)
 #define LAST_EP_INDEX			30
 
-/* Set TR Dequeue Pointer command TRB fields */
+/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
 #define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
 #define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
+#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
 
 
 /* Port Status Change Event TRB fields */
@@ -1341,6 +1343,7 @@ struct xhci_ring {
 	unsigned int		num_trbs_free_temp;
 	enum xhci_ring_type	type;
 	bool			last_td_was_short;
+	struct radix_tree_root	*trb_address_map;
 };
 
 struct xhci_erst_entry {
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index ba5f70f92888..1bca274dc3b5 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -128,7 +128,6 @@ config USB_IDMOUSE
 
 config USB_FTDI_ELAN
 	tristate "Elan PCMCIA CardBus Adapter USB Client"
-	default M
 	help
 	  ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
 	  Currently only the U132 adapter is available.
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index de98906f786d..06b5d77cd9ad 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2123,8 +2123,8 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
 	u8 tmp8, tmp82, ramtype;
 	int bw = 0;
 	char *ramtypetext1 = NULL;
-	const char *ramtypetext2[] = {	"SDR SDRAM", "SDR SGRAM",
-					"DDR SDRAM", "DDR SGRAM" };
+	static const char ram_datarate[4] = {'S', 'S', 'D', 'D'};
+	static const char ram_dynamictype[4] = {'D', 'G', 'D', 'G'};
 	static const int busSDR[4]  = {64, 64, 128, 128};
 	static const int busDDR[4]  = {32, 32,  64,  64};
 	static const int busDDRA[4] = {64+32, 64+32 , (64+32)*2, (64+32)*2};
@@ -2156,8 +2156,10 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
 		break;
 	}
 
-	dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %s, bus width %d\n", (sisusb->vramsize >> 20), ramtypetext1,
-			ramtypetext2[ramtype], bw);
+
+	dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %cDR S%cRAM, bus width %d\n",
+		 sisusb->vramsize >> 20, ramtypetext1,
+		 ram_datarate[ramtype], ram_dynamictype[ramtype], bw);
 }
 
 static int
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 78eb4ff33269..bdef0d6eb91d 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -22,8 +22,27 @@
 enum led_type {
 	DELCOM_VISUAL_SIGNAL_INDICATOR,
 	DREAM_CHEEKY_WEBMAIL_NOTIFIER,
+	RISO_KAGAKU_LED
 };
 
+/* the Webmail LED made by RISO KAGAKU CORP. decodes a color index
+   internally, we want to keep the red+green+blue sysfs api, so we decode
+   from 1-bit RGB to the riso kagaku color index according to this table... */
+
+static unsigned const char riso_kagaku_tbl[] = {
+/* R+2G+4B -> riso kagaku color index */
+	[0] = 0, /* black   */
+	[1] = 2, /* red     */
+	[2] = 1, /* green   */
+	[3] = 5, /* yellow  */
+	[4] = 3, /* blue    */
+	[5] = 6, /* magenta */
+	[6] = 4, /* cyan    */
+	[7] = 7  /* white   */
+};
+
+#define RISO_KAGAKU_IX(r,g,b) riso_kagaku_tbl[((r)?1:0)+((g)?2:0)+((b)?4:0)]
+
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0fc5, 0x1223),
@@ -32,6 +51,8 @@ static const struct usb_device_id id_table[] = {
 			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ USB_DEVICE(0x1d34, 0x000a),
 			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
+	{ USB_DEVICE(0x1294, 0x1320),
+			.driver_info = RISO_KAGAKU_LED },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -48,6 +69,7 @@ static void change_color(struct usb_led *led)
 {
 	int retval = 0;
 	unsigned char *buffer;
+	int actlength;
 
 	buffer = kmalloc(8, GFP_KERNEL);
 	if (!buffer) {
@@ -104,6 +126,18 @@ static void change_color(struct usb_led *led)
 					2000);
 		break;
 
+	case RISO_KAGAKU_LED:
+		buffer[0] = RISO_KAGAKU_IX(led->red, led->green, led->blue);
+		buffer[1] = 0;
+		buffer[2] = 0;
+		buffer[3] = 0;
+		buffer[4] = 0;
+
+		retval = usb_interrupt_msg(led->udev,
+			usb_sndctrlpipe(led->udev, 2),
+			buffer, 5, &actlength, 1000 /*ms timeout*/);
+		break;
+
 	default:
 		dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
 	}
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 688dc8bb192d..8b789792f6fa 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -43,6 +43,7 @@ config USB_MUSB_HOST
 config USB_MUSB_GADGET
 	bool "Gadget only mode"
 	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
+	depends on HAS_DMA
 	help
 	  Select this when you want to use MUSB in gadget mode only,
 	  thereby the host feature will be regressed.
@@ -50,6 +51,7 @@ config USB_MUSB_GADGET
 config USB_MUSB_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
+	depends on HAS_DMA
 	help
 	  This is the default mode of working of MUSB controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 239ad0b1ceb6..07576907e2c6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -438,7 +438,6 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl)
 {
-	struct usb_otg *otg = musb->xceiv->otg;
 	irqreturn_t handled = IRQ_NONE;
 
 	dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
@@ -656,7 +655,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				break;
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
-			musb->is_active = otg->gadget->b_hnp_enable;
+			musb->is_active = musb->g.b_hnp_enable;
 			if (musb->is_active) {
 				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -672,7 +671,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			break;
 		case OTG_STATE_A_HOST:
 			musb->xceiv->state = OTG_STATE_A_SUSPEND;
-			musb->is_active = otg->host->b_hnp_enable;
+			musb->is_active = musb->hcd->self.b_hnp_enable;
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index f88929609bac..7b8bbf53127e 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -39,6 +39,7 @@ struct cppi41_dma_channel {
 	u32 transferred;
 	u32 packet_sz;
 	struct list_head tx_check;
+	struct work_struct dma_completion;
 };
 
 #define MUSB_DMA_NUM_CHANNELS 15
@@ -112,6 +113,18 @@ static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
 	return true;
 }
 
+static bool is_isoc(struct musb_hw_ep *hw_ep, bool in)
+{
+	if (in && hw_ep->in_qh) {
+		if (hw_ep->in_qh->type == USB_ENDPOINT_XFER_ISOC)
+			return true;
+	} else if (hw_ep->out_qh) {
+		if (hw_ep->out_qh->type == USB_ENDPOINT_XFER_ISOC)
+			return true;
+	}
+	return false;
+}
+
 static void cppi41_dma_callback(void *private_data);
 
 static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
@@ -119,7 +132,8 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
 	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
 	struct musb *musb = hw_ep->musb;
 
-	if (!cppi41_channel->prog_len) {
+	if (!cppi41_channel->prog_len ||
+	    (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)) {
 
 		/* done, complete */
 		cppi41_channel->channel.actual_len =
@@ -165,6 +179,32 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
 	}
 }
 
+static void cppi_trans_done_work(struct work_struct *work)
+{
+	unsigned long flags;
+	struct cppi41_dma_channel *cppi41_channel =
+		container_of(work, struct cppi41_dma_channel, dma_completion);
+	struct cppi41_dma_controller *controller = cppi41_channel->controller;
+	struct musb *musb = controller->musb;
+	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	bool empty;
+
+	if (!cppi41_channel->is_tx && is_isoc(hw_ep, 1)) {
+		spin_lock_irqsave(&musb->lock, flags);
+		cppi41_trans_done(cppi41_channel);
+		spin_unlock_irqrestore(&musb->lock, flags);
+	} else {
+		empty = musb_is_tx_fifo_empty(hw_ep);
+		if (empty) {
+			spin_lock_irqsave(&musb->lock, flags);
+			cppi41_trans_done(cppi41_channel);
+			spin_unlock_irqrestore(&musb->lock, flags);
+		} else {
+			schedule_work(&cppi41_channel->dma_completion);
+		}
+	}
+}
+
 static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
 {
 	struct cppi41_dma_controller *controller;
@@ -228,6 +268,14 @@ static void cppi41_dma_callback(void *private_data)
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
+	if (!cppi41_channel->is_tx) {
+		if (is_isoc(hw_ep, 1))
+			schedule_work(&cppi41_channel->dma_completion);
+		else
+			cppi41_trans_done(cppi41_channel);
+		goto out;
+	}
+
 	empty = musb_is_tx_fifo_empty(hw_ep);
 	if (empty) {
 		cppi41_trans_done(cppi41_channel);
@@ -264,6 +312,10 @@ static void cppi41_dma_callback(void *private_data)
 				goto out;
 			}
 		}
+		if (is_isoc(hw_ep, 0)) {
+			schedule_work(&cppi41_channel->dma_completion);
+			goto out;
+		}
 		list_add_tail(&cppi41_channel->tx_check,
 				&controller->early_tx_list);
 		if (!hrtimer_active(&controller->early_tx)) {
@@ -448,12 +500,25 @@ static int cppi41_dma_channel_program(struct dma_channel *channel,
 				dma_addr_t dma_addr, u32 len)
 {
 	int ret;
+	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+	int hb_mult = 0;
 
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	if (is_host_active(cppi41_channel->controller->musb)) {
+		if (cppi41_channel->is_tx)
+			hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult;
+		else
+			hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult;
+	}
+
 	channel->status = MUSB_DMA_STATUS_BUSY;
 	channel->actual_len = 0;
+
+	if (hb_mult)
+		packet_sz = hb_mult * (packet_sz & 0x7FF);
+
 	ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len);
 	if (!ret)
 		channel->status = MUSB_DMA_STATUS_FREE;
@@ -607,6 +672,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		cppi41_channel->port_num = port;
 		cppi41_channel->is_tx = is_tx;
 		INIT_LIST_HEAD(&cppi41_channel->tx_check);
+		INIT_WORK(&cppi41_channel->dma_completion,
+			  cppi_trans_done_work);
 
 		musb_dma = &cppi41_channel->channel;
 		musb_dma->private_data = cppi41_channel;
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 7a109eae9b9a..3372ded5def7 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -45,6 +45,8 @@
 #include <linux/of_irq.h>
 #include <linux/usb/of.h>
 
+#include <linux/debugfs.h>
+
 #include "musb_core.h"
 
 static const struct of_device_id musb_dsps_of_match[];
@@ -136,6 +138,26 @@ struct dsps_glue {
 	unsigned long last_timer;    /* last timer data for each instance */
 
 	struct dsps_context context;
+	struct debugfs_regset32 regset;
+	struct dentry *dbgfs_root;
+};
+
+static const struct debugfs_reg32 dsps_musb_regs[] = {
+	{ "revision",		0x00 },
+	{ "control",		0x14 },
+	{ "status",		0x18 },
+	{ "eoi",		0x24 },
+	{ "intr0_stat",		0x30 },
+	{ "intr1_stat",		0x34 },
+	{ "intr0_set",		0x38 },
+	{ "intr1_set",		0x3c },
+	{ "txmode",		0x70 },
+	{ "rxmode",		0x74 },
+	{ "autoreq",		0xd0 },
+	{ "srpfixtime",		0xd4 },
+	{ "tdown",		0xd8 },
+	{ "phy_utmi",		0xe0 },
+	{ "mode",		0xe8 },
 };
 
 static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
@@ -368,6 +390,30 @@ out:
 	return ret;
 }
 
+static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
+{
+	struct dentry *root;
+	struct dentry *file;
+	char buf[128];
+
+	sprintf(buf, "%s.dsps", dev_name(musb->controller));
+	root = debugfs_create_dir(buf, NULL);
+	if (!root)
+		return -ENOMEM;
+	glue->dbgfs_root = root;
+
+	glue->regset.regs = dsps_musb_regs;
+	glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
+	glue->regset.base = musb->ctrl_base;
+
+	file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
+	if (!file) {
+		debugfs_remove_recursive(root);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
 static int dsps_musb_init(struct musb *musb)
 {
 	struct device *dev = musb->controller;
@@ -377,6 +423,7 @@ static int dsps_musb_init(struct musb *musb)
 	void __iomem *reg_base;
 	struct resource *r;
 	u32 rev, val;
+	int ret;
 
 	r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
 	if (!r)
@@ -410,6 +457,10 @@ static int dsps_musb_init(struct musb *musb)
 	val &= ~(1 << wrp->otg_disable);
 	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
 
+	ret = dsps_musb_dbg_init(musb, glue);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -616,7 +667,7 @@ static int dsps_probe(struct platform_device *pdev)
 	wrp = match->data;
 
 	/* allocate glue */
-	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&pdev->dev, "unable to allocate glue memory\n");
 		return -ENOMEM;
@@ -644,7 +695,6 @@ err3:
 	pm_runtime_put(&pdev->dev);
 err2:
 	pm_runtime_disable(&pdev->dev);
-	kfree(glue);
 	return ret;
 }
 
@@ -657,7 +707,9 @@ static int dsps_remove(struct platform_device *pdev)
 	/* disable usbss clocks */
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	kfree(glue);
+
+	debugfs_remove_recursive(glue->dbgfs_root);
+
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index abb38c3833ef..eb06291a40c8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1694,7 +1694,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			| MUSB_RXCSR_RXPKTRDY);
 		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
 
-#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
+	defined(CONFIG_USB_TI_CPPI41_DMA)
 		if (usb_pipeisoc(pipe)) {
 			struct usb_iso_packet_descriptor *d;
 
@@ -1707,10 +1708,30 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			if (d->status != -EILSEQ && d->status != -EOVERFLOW)
 				d->status = 0;
 
-			if (++qh->iso_idx >= urb->number_of_packets)
+			if (++qh->iso_idx >= urb->number_of_packets) {
 				done = true;
-			else
+			} else {
+#if defined(CONFIG_USB_TI_CPPI41_DMA)
+				struct dma_controller   *c;
+				dma_addr_t *buf;
+				u32 length, ret;
+
+				c = musb->dma_controller;
+				buf = (void *)
+					urb->iso_frame_desc[qh->iso_idx].offset
+					+ (u32)urb->transfer_dma;
+
+				length =
+					urb->iso_frame_desc[qh->iso_idx].length;
+
+				val |= MUSB_RXCSR_DMAENAB;
+				musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+				ret = c->channel_program(dma, qh->maxpacket,
+						0, (u32) buf, length);
+#endif
 				done = false;
+			}
 
 		} else  {
 		/* done if urb buffer is full or short packet is recd */
@@ -1750,7 +1771,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 		}
 
 		/* we are expecting IN packets */
-#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \
+	defined(CONFIG_USB_TI_CPPI41_DMA)
 		if (dma) {
 			struct dma_controller	*c;
 			u16			rx_count;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8aa59a2c5eb2..d341c149a2f9 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,7 +37,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/usb/musb-omap.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
 #include "musb_core.h"
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d1451d5bbea..416e0c8cf6ff 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -75,27 +75,6 @@ config NOP_USB_XCEIV
 	  built-in with usb ip or which are autonomous and doesn't require any
 	  phy programming such as ISP1x04 etc.
 
-config OMAP_CONTROL_USB
-	tristate "OMAP CONTROL USB Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
-	help
-	  Enable this to add support for the USB part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY.
-
-config OMAP_USB3
-	tristate "OMAP USB3 PHY Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
-	select OMAP_CONTROL_USB
-	select USB_PHY
-	help
-	  Enable this to support the USB3 PHY that is part of SOC. This
-	  driver takes care of all the PHY functionality apart from comparator.
-	  This driver interacts with the "OMAP Control USB Driver" to power
-	  on/off the PHY.
-
 config AM335X_CONTROL_USB
 	tristate
 
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index be58adae3496..f8fa719a31b9 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -13,11 +13,9 @@ obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301-omap.o
 obj-$(CONFIG_MV_U3D_PHY)		+= phy-mv-u3d-usb.o
 obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
 obj-$(CONFIG_TAHVO_USB)			+= phy-tahvo.o
-obj-$(CONFIG_OMAP_CONTROL_USB)		+= phy-omap-control.o
 obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
 obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
-obj-$(CONFIG_OMAP_USB3)			+= phy-omap-usb3.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
 obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c
index 7aa314ef4a8a..c47e5a6edde2 100644
--- a/drivers/usb/phy/phy-fsm-usb.c
+++ b/drivers/usb/phy/phy-fsm-usb.c
@@ -317,10 +317,12 @@ int otg_statemachine(struct otg_fsm *fsm)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
 		break;
 	case OTG_STATE_A_HOST:
-		if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
 				fsm->otg->host->b_hnp_enable)
 			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
-		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
+		else if (!fsm->b_conn)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
 		else if (!fsm->a_vbus_vld)
 			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
@@ -346,8 +348,7 @@ int otg_statemachine(struct otg_fsm *fsm)
 			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req ||
-				(!fsm->a_sess_vld && !fsm->b_conn))
+		if (fsm->a_wait_vfall_tmout)
 			otg_set_state(fsm, OTG_STATE_A_IDLE);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index d204f745ed05..5b37b81f2ef6 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1428,7 +1428,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 	motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
 	if (!motg->phy.otg) {
 		dev_err(&pdev->dev, "unable to allocate msm_otg\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto free_motg;
 	}
 
 	motg->pdata = dev_get_platdata(&pdev->dev);
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index b42897b6474c..c42bdf0c4a1f 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
  * on behalf of DENX Software Engineering GmbH
  *
@@ -20,6 +20,9 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #define DRIVER_NAME "mxs_phy"
 
@@ -28,18 +31,134 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_DEBUG_SET			0x54
+#define HW_USBPHY_DEBUG_CLR			0x58
+
+#define HW_USBPHY_IP				0x90
+#define HW_USBPHY_IP_SET			0x94
+#define HW_USBPHY_IP_CLR			0x98
+
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP		BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP		BIT(21)
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
 #define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
 #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
 
+#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
+
+#define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+
+/* Anatop Registers */
+#define ANADIG_ANA_MISC0			0x150
+#define ANADIG_ANA_MISC0_SET			0x154
+#define ANADIG_ANA_MISC0_CLR			0x158
+
+#define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+#define ANADIG_USB2_VBUS_DET_STAT		0x220
+
+#define ANADIG_USB1_LOOPBACK_SET		0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+#define ANADIG_USB2_LOOPBACK_SET		0x244
+#define ANADIG_USB2_LOOPBACK_CLR		0x248
+
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS	BIT(0)
+
+/*
+ * The PHY will be in messy if there is a wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORMAL_IN_SUSPEND		BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST		BIT(2)
+
+/*
+ * IC has bug fixes logic, they include
+ * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
+ * which are described at above flags, the RTL will handle it
+ * according to different versions.
+ */
+#define MXS_PHY_NEED_IP_FIX			BIT(3)
+
+struct mxs_phy_data {
+	unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+	.flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_data imx6q_phy_data = {
+	.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+		MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
 struct mxs_phy {
 	struct usb_phy phy;
 	struct clk *clk;
+	const struct mxs_phy_data *data;
+	struct regmap *regmap_anatop;
+	int port_id;
 };
 
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+	return mxs_phy->data == &imx6sl_phy_data;
+}
+
+/*
+ * PHY needs some 32K cycles to switch from 32K clock to
+ * bus (such as AHB/AXI, etc) clock.
+ */
+static void mxs_phy_clock_switch_delay(void)
+{
+	usleep_range(300, 400);
+}
 
 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 {
@@ -53,19 +172,105 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	/* Power up the PHY */
 	writel(0, base + HW_USBPHY_PWD);
 
-	/* enable FS/LS device */
-	writel(BM_USBPHY_CTRL_ENUTMILEVEL2 |
-	       BM_USBPHY_CTRL_ENUTMILEVEL3,
+	/*
+	 * USB PHY Ctrl Setting
+	 * - Auto clock/power on
+	 * - Enable full/low speed support
+	 */
+	writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+		BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+		BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+		BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+		BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
+		BM_USBPHY_CTRL_ENUTMILEVEL2 |
+		BM_USBPHY_CTRL_ENUTMILEVEL3,
 	       base + HW_USBPHY_CTRL_SET);
 
+	if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
+		writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
 	return 0;
 }
 
+/* Return true if the vbus is there */
+static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
+{
+	unsigned int vbus_value;
+
+	if (mxs_phy->port_id == 0)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	else if (mxs_phy->port_id == 1)
+		regmap_read(mxs_phy->regmap_anatop,
+			ANADIG_USB2_VBUS_DET_STAT,
+			&vbus_value);
+
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		return true;
+	else
+		return false;
+}
+
+static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	u32 reg;
+
+	if (disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+
+	if (mxs_phy->port_id == 0) {
+		reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
+			: ANADIG_USB1_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+	} else if (mxs_phy->port_id == 1) {
+		reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
+			: ANADIG_USB2_LOOPBACK_CLR;
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
+			BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
+	}
+
+	if (!disconnect)
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_SET);
+
+	/* Delay some time, and let Linestate be SE0 for controller */
+	if (disconnect)
+		usleep_range(500, 1000);
+}
+
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+	bool vbus_is_on = false;
+
+	/* If the SoCs don't need to disconnect line without vbus, quit */
+	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+		return;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
+
+	if (on && !vbus_is_on)
+		__mxs_phy_disconnect_line(mxs_phy, true);
+	else
+		__mxs_phy_disconnect_line(mxs_phy, false);
+
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	int ret;
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 
+	mxs_phy_clock_switch_delay();
 	ret = clk_prepare_enable(mxs_phy->clk);
 	if (ret)
 		return ret;
@@ -94,6 +299,7 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
 	} else {
+		mxs_phy_clock_switch_delay();
 		ret = clk_prepare_enable(mxs_phy->clk);
 		if (ret)
 			return ret;
@@ -105,11 +311,28 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+				BM_USBPHY_CTRL_ENIDCHG_WKUP;
+	if (enabled) {
+		mxs_phy_disconnect_line(mxs_phy, true);
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+	} else {
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+		mxs_phy_disconnect_line(mxs_phy, false);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has connected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has connected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -121,8 +344,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
 static int mxs_phy_on_disconnect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
-	dev_dbg(phy->dev, "%s speed device has disconnected\n",
-		(speed == USB_SPEED_HIGH) ? "high" : "non-high");
+	dev_dbg(phy->dev, "%s device has disconnected\n",
+		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
 	if (speed == USB_SPEED_HIGH)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -138,6 +361,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(mxs_phy_dt_ids, &pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
@@ -157,6 +383,22 @@ static int mxs_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	/* Some SoCs don't have anatop registers */
+	if (of_get_property(np, "fsl,anatop", NULL)) {
+		mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+			(np, "fsl,anatop");
+		if (IS_ERR(mxs_phy->regmap_anatop)) {
+			dev_dbg(&pdev->dev,
+				"failed to find regmap for anatop\n");
+			return PTR_ERR(mxs_phy->regmap_anatop);
+		}
+	}
+
+	ret = of_alias_get_id(np, "usbphy");
+	if (ret < 0)
+		dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+	mxs_phy->port_id = ret;
+
 	mxs_phy->phy.io_priv		= base;
 	mxs_phy->phy.dev		= &pdev->dev;
 	mxs_phy->phy.label		= DRIVER_NAME;
@@ -166,11 +408,15 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
+	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
 
 	mxs_phy->clk = clk;
+	mxs_phy->data = of_id->data;
 
 	platform_set_drvdata(pdev, mxs_phy);
 
+	device_set_wakeup_capable(&pdev->dev, true);
+
 	ret = usb_add_phy_dev(&mxs_phy->phy);
 	if (ret)
 		return ret;
@@ -187,11 +433,46 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_phy_dt_ids[] = {
-	{ .compatible = "fsl,imx23-usbphy", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+#ifdef CONFIG_PM_SLEEP
+static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+{
+	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	if (is_imx6q_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
+	else if (is_imx6sl_phy(mxs_phy))
+		regmap_write(mxs_phy->regmap_anatop,
+			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
+}
+
+static int mxs_phy_system_suspend(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
+
+	return 0;
+}
+
+static int mxs_phy_system_resume(struct device *dev)
+{
+	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
+		mxs_phy_system_resume);
 
 static struct platform_driver mxs_phy_driver = {
 	.probe = mxs_phy_probe,
@@ -200,6 +481,7 @@ static struct platform_driver mxs_phy_driver = {
 		.name = DRIVER_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = mxs_phy_dt_ids,
+		.pm = &mxs_phy_pm,
 	 },
 };
 
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
deleted file mode 100644
index e7253182e47d..000000000000
--- a/drivers/usb/phy/phy-omap-control.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * omap-control-usb.c - The USB part of control module.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/usb/omap_control_usb.h>
-
-/**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
- * @dev: the control module device
- * @on: 0 or 1, based on powering on or off the PHY
- */
-void omap_control_usb_phy_power(struct device *dev, int on)
-{
-	u32 val;
-	unsigned long rate;
-	struct omap_control_usb	*control_usb;
-
-	if (IS_ERR(dev) || !dev) {
-		pr_err("%s: invalid device\n", __func__);
-		return;
-	}
-
-	control_usb = dev_get_drvdata(dev);
-	if (!control_usb) {
-		dev_err(dev, "%s: invalid control usb device\n", __func__);
-		return;
-	}
-
-	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
-		return;
-
-	val = readl(control_usb->power);
-
-	switch (control_usb->type) {
-	case OMAP_CTRL_TYPE_USB2:
-		if (on)
-			val &= ~OMAP_CTRL_DEV_PHY_PD;
-		else
-			val |= OMAP_CTRL_DEV_PHY_PD;
-		break;
-
-	case OMAP_CTRL_TYPE_PIPE3:
-		rate = clk_get_rate(control_usb->sys_clk);
-		rate = rate/1000000;
-
-		if (on) {
-			val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
-					OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
-			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
-				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-			val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
-		} else {
-			val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
-			val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
-				OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-		}
-		break;
-
-	case OMAP_CTRL_TYPE_DRA7USB2:
-		if (on)
-			val &= ~OMAP_CTRL_USB2_PHY_PD;
-		else
-			val |= OMAP_CTRL_USB2_PHY_PD;
-		break;
-
-	case OMAP_CTRL_TYPE_AM437USB2:
-		if (on) {
-			val &= ~(AM437X_CTRL_USB2_PHY_PD |
-					AM437X_CTRL_USB2_OTG_PD);
-			val |= (AM437X_CTRL_USB2_OTGVDET_EN |
-					AM437X_CTRL_USB2_OTGSESSEND_EN);
-		} else {
-			val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
-					AM437X_CTRL_USB2_OTGSESSEND_EN);
-			val |= (AM437X_CTRL_USB2_PHY_PD |
-					 AM437X_CTRL_USB2_OTG_PD);
-		}
-		break;
-	default:
-		dev_err(dev, "%s: type %d not recognized\n",
-					__func__, control_usb->type);
-		break;
-	}
-
-	writel(val, control_usb->power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
-
-/**
- * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that a usb
- * device has been connected.
- */
-static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
-	val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core that it has been
- * connected to a usb host.
- */
-static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~OMAP_CTRL_DEV_SESSEND;
-	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
-		OMAP_CTRL_DEV_VBUSVALID;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
- * impedance
- * @ctrl_usb: struct omap_control_usb *
- *
- * Writes to the mailbox register to notify the usb core it's now in
- * disconnected state.
- */
-static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
-{
-	u32 val;
-
-	val = readl(ctrl_usb->otghs_control);
-	val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
-	val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
-	writel(val, ctrl_usb->otghs_control);
-}
-
-/**
- * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
- * or device mode or to denote disconnected state
- * @dev: the control module device
- * @mode: The mode to which usb should be configured
- *
- * This is an API to write to the mailbox register to notify the usb core that
- * a usb device has been connected.
- */
-void omap_control_usb_set_mode(struct device *dev,
-	enum omap_control_usb_mode mode)
-{
-	struct omap_control_usb	*ctrl_usb;
-
-	if (IS_ERR(dev) || !dev)
-		return;
-
-	ctrl_usb = dev_get_drvdata(dev);
-
-	if (!ctrl_usb) {
-		dev_err(dev, "Invalid control usb device\n");
-		return;
-	}
-
-	if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
-		return;
-
-	switch (mode) {
-	case USB_MODE_HOST:
-		omap_control_usb_host_mode(ctrl_usb);
-		break;
-	case USB_MODE_DEVICE:
-		omap_control_usb_device_mode(ctrl_usb);
-		break;
-	case USB_MODE_DISCONNECT:
-		omap_control_usb_set_sessionend(ctrl_usb);
-		break;
-	default:
-		dev_vdbg(dev, "invalid omap control usb mode\n");
-	}
-}
-EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
-
-#ifdef CONFIG_OF
-
-static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
-static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
-static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
-static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
-static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
-
-static const struct of_device_id omap_control_usb_id_table[] = {
-	{
-		.compatible = "ti,control-phy-otghs",
-		.data = &otghs_data,
-	},
-	{
-		.compatible = "ti,control-phy-usb2",
-		.data = &usb2_data,
-	},
-	{
-		.compatible = "ti,control-phy-pipe3",
-		.data = &pipe3_data,
-	},
-	{
-		.compatible = "ti,control-phy-dra7usb2",
-		.data = &dra7usb2_data,
-	},
-	{
-		.compatible = "ti,control-phy-am437usb2",
-		.data = &am437usb2_data,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
-
-static int omap_control_usb_probe(struct platform_device *pdev)
-{
-	struct resource	*res;
-	const struct of_device_id *of_id;
-	struct omap_control_usb *control_usb;
-
-	of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
-								&pdev->dev);
-	if (!of_id)
-		return -EINVAL;
-
-	control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
-		GFP_KERNEL);
-	if (!control_usb) {
-		dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
-		return -ENOMEM;
-	}
-
-	control_usb->dev = &pdev->dev;
-	control_usb->type = *(enum omap_control_usb_type *)of_id->data;
-
-	if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"otghs_control");
-		control_usb->otghs_control = devm_ioremap_resource(
-			&pdev->dev, res);
-		if (IS_ERR(control_usb->otghs_control))
-			return PTR_ERR(control_usb->otghs_control);
-	} else {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-				"power");
-		control_usb->power = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(control_usb->power)) {
-			dev_err(&pdev->dev, "Couldn't get power register\n");
-			return PTR_ERR(control_usb->power);
-		}
-	}
-
-	if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
-		control_usb->sys_clk = devm_clk_get(control_usb->dev,
-			"sys_clkin");
-		if (IS_ERR(control_usb->sys_clk)) {
-			pr_err("%s: unable to get sys_clkin\n", __func__);
-			return -EINVAL;
-		}
-	}
-
-	dev_set_drvdata(control_usb->dev, control_usb);
-
-	return 0;
-}
-
-static struct platform_driver omap_control_usb_driver = {
-	.probe		= omap_control_usb_probe,
-	.driver		= {
-		.name	= "omap-control-usb",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(omap_control_usb_id_table),
-	},
-};
-
-static int __init omap_control_usb_init(void)
-{
-	return platform_driver_register(&omap_control_usb_driver);
-}
-subsys_initcall(omap_control_usb_init);
-
-static void __exit omap_control_usb_exit(void)
-{
-	platform_driver_unregister(&omap_control_usb_driver);
-}
-module_exit(omap_control_usb_exit);
-
-MODULE_ALIAS("platform: omap_control_usb");
-MODULE_AUTHOR("Texas Instruments Inc.");
-MODULE_DESCRIPTION("OMAP Control Module USB Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
deleted file mode 100644
index 0c6ba29bdddd..000000000000
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/usb/omap_usb.h>
-#include <linux/of.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
-#include <linux/of_platform.h>
-
-#define	PLL_STATUS		0x00000004
-#define	PLL_GO			0x00000008
-#define	PLL_CONFIGURATION1	0x0000000C
-#define	PLL_CONFIGURATION2	0x00000010
-#define	PLL_CONFIGURATION3	0x00000014
-#define	PLL_CONFIGURATION4	0x00000020
-
-#define	PLL_REGM_MASK		0x001FFE00
-#define	PLL_REGM_SHIFT		0x9
-#define	PLL_REGM_F_MASK		0x0003FFFF
-#define	PLL_REGM_F_SHIFT	0x0
-#define	PLL_REGN_MASK		0x000001FE
-#define	PLL_REGN_SHIFT		0x1
-#define	PLL_SELFREQDCO_MASK	0x0000000E
-#define	PLL_SELFREQDCO_SHIFT	0x1
-#define	PLL_SD_MASK		0x0003FC00
-#define	PLL_SD_SHIFT		0x9
-#define	SET_PLL_GO		0x1
-#define	PLL_TICOPWDN		0x10000
-#define	PLL_LOCK		0x2
-#define	PLL_IDLE		0x1
-
-/*
- * This is an Empirical value that works, need to confirm the actual
- * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status
- * to be correctly reflected in the USB3PHY_PLL_STATUS register.
- */
-# define PLL_IDLE_TIME  100;
-
-struct usb_dpll_map {
-	unsigned long rate;
-	struct usb_dpll_params params;
-};
-
-static struct usb_dpll_map dpll_map[] = {
-	{12000000, {1250, 5, 4, 20, 0} },	/* 12 MHz */
-	{16800000, {3125, 20, 4, 20, 0} },	/* 16.8 MHz */
-	{19200000, {1172, 8, 4, 20, 65537} },	/* 19.2 MHz */
-	{20000000, {1000, 7, 4, 10, 0} },	/* 20 MHz */
-	{26000000, {1250, 12, 4, 20, 0} },	/* 26 MHz */
-	{38400000, {3125, 47, 4, 20, 92843} },	/* 38.4 MHz */
-};
-
-static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(dpll_map); i++) {
-		if (rate == dpll_map[i].rate)
-			return &dpll_map[i].params;
-	}
-
-	return NULL;
-}
-
-static int omap_usb3_suspend(struct usb_phy *x, int suspend)
-{
-	struct omap_usb *phy = phy_to_omapusb(x);
-	int	val;
-	int timeout = PLL_IDLE_TIME;
-
-	if (suspend && !phy->is_suspended) {
-		val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
-		val |= PLL_IDLE;
-		omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
-
-		do {
-			val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS);
-			if (val & PLL_TICOPWDN)
-				break;
-			udelay(1);
-		} while (--timeout);
-
-		omap_control_usb_phy_power(phy->control_dev, 0);
-
-		phy->is_suspended	= 1;
-	} else if (!suspend && phy->is_suspended) {
-		phy->is_suspended	= 0;
-
-		val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
-		val &= ~PLL_IDLE;
-		omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
-
-		do {
-			val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS);
-			if (!(val & PLL_TICOPWDN))
-				break;
-			udelay(1);
-		} while (--timeout);
-	}
-
-	return 0;
-}
-
-static void omap_usb_dpll_relock(struct omap_usb *phy)
-{
-	u32		val;
-	unsigned long	timeout;
-
-	omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
-
-	timeout = jiffies + msecs_to_jiffies(20);
-	do {
-		val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS);
-		if (val & PLL_LOCK)
-			break;
-	} while (!WARN_ON(time_after(jiffies, timeout)));
-}
-
-static int omap_usb_dpll_lock(struct omap_usb *phy)
-{
-	u32			val;
-	unsigned long		rate;
-	struct usb_dpll_params *dpll_params;
-
-	rate = clk_get_rate(phy->sys_clk);
-	dpll_params = omap_usb3_get_dpll_params(rate);
-	if (!dpll_params) {
-		dev_err(phy->dev,
-			  "No DPLL configuration for %lu Hz SYS CLK\n", rate);
-		return -EINVAL;
-	}
-
-	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
-	val &= ~PLL_REGN_MASK;
-	val |= dpll_params->n << PLL_REGN_SHIFT;
-	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
-
-	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
-	val &= ~PLL_SELFREQDCO_MASK;
-	val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
-	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
-
-	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
-	val &= ~PLL_REGM_MASK;
-	val |= dpll_params->m << PLL_REGM_SHIFT;
-	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
-
-	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
-	val &= ~PLL_REGM_F_MASK;
-	val |= dpll_params->mf << PLL_REGM_F_SHIFT;
-	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
-
-	val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
-	val &= ~PLL_SD_MASK;
-	val |= dpll_params->sd << PLL_SD_SHIFT;
-	omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
-
-	omap_usb_dpll_relock(phy);
-
-	return 0;
-}
-
-static int omap_usb3_init(struct usb_phy *x)
-{
-	struct omap_usb	*phy = phy_to_omapusb(x);
-	int ret;
-
-	ret = omap_usb_dpll_lock(phy);
-	if (ret)
-		return ret;
-
-	omap_control_usb_phy_power(phy->control_dev, 1);
-
-	return 0;
-}
-
-static int omap_usb3_probe(struct platform_device *pdev)
-{
-	struct omap_usb *phy;
-	struct resource *res;
-	struct device_node *node = pdev->dev.of_node;
-	struct device_node *control_node;
-	struct platform_device *control_pdev;
-
-	if (!node)
-		return -EINVAL;
-
-	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-	if (!phy) {
-		dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n");
-		return -ENOMEM;
-	}
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
-	phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(phy->pll_ctrl_base))
-		return PTR_ERR(phy->pll_ctrl_base);
-
-	phy->dev		= &pdev->dev;
-
-	phy->phy.dev		= phy->dev;
-	phy->phy.label		= "omap-usb3";
-	phy->phy.init		= omap_usb3_init;
-	phy->phy.set_suspend	= omap_usb3_suspend;
-	phy->phy.type		= USB_PHY_TYPE_USB3;
-
-	phy->is_suspended	= 1;
-	phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
-	if (IS_ERR(phy->wkupclk)) {
-		dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
-		return PTR_ERR(phy->wkupclk);
-	}
-	clk_prepare(phy->wkupclk);
-
-	phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
-	if (IS_ERR(phy->optclk)) {
-		dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n");
-		return PTR_ERR(phy->optclk);
-	}
-	clk_prepare(phy->optclk);
-
-	phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin");
-	if (IS_ERR(phy->sys_clk)) {
-		pr_err("%s: unable to get sys_clkin\n", __func__);
-		return -EINVAL;
-	}
-
-	control_node = of_parse_phandle(node, "ctrl-module", 0);
-	if (!control_node) {
-		dev_err(&pdev->dev, "Failed to get control device phandle\n");
-		return -EINVAL;
-	}
-	control_pdev = of_find_device_by_node(control_node);
-	if (!control_pdev) {
-		dev_err(&pdev->dev, "Failed to get control device\n");
-		return -EINVAL;
-	}
-
-	phy->control_dev = &control_pdev->dev;
-
-	omap_control_usb_phy_power(phy->control_dev, 0);
-	usb_add_phy_dev(&phy->phy);
-
-	platform_set_drvdata(pdev, phy);
-
-	pm_runtime_enable(phy->dev);
-	pm_runtime_get(&pdev->dev);
-
-	return 0;
-}
-
-static int omap_usb3_remove(struct platform_device *pdev)
-{
-	struct omap_usb *phy = platform_get_drvdata(pdev);
-
-	clk_unprepare(phy->wkupclk);
-	clk_unprepare(phy->optclk);
-	usb_remove_phy(&phy->phy);
-	if (!pm_runtime_suspended(&pdev->dev))
-		pm_runtime_put(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_RUNTIME
-
-static int omap_usb3_runtime_suspend(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-
-	clk_disable(phy->wkupclk);
-	clk_disable(phy->optclk);
-
-	return 0;
-}
-
-static int omap_usb3_runtime_resume(struct device *dev)
-{
-	u32 ret = 0;
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-
-	ret = clk_enable(phy->optclk);
-	if (ret) {
-		dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
-		goto err1;
-	}
-
-	ret = clk_enable(phy->wkupclk);
-	if (ret) {
-		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
-		goto err2;
-	}
-
-	return 0;
-
-err2:
-	clk_disable(phy->optclk);
-
-err1:
-	return ret;
-}
-
-static const struct dev_pm_ops omap_usb3_pm_ops = {
-	SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume,
-		NULL)
-};
-
-#define DEV_PM_OPS     (&omap_usb3_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
-#ifdef CONFIG_OF
-static const struct of_device_id omap_usb3_id_table[] = {
-	{ .compatible = "ti,omap-usb3" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, omap_usb3_id_table);
-#endif
-
-static struct platform_driver omap_usb3_driver = {
-	.probe		= omap_usb3_probe,
-	.remove		= omap_usb3_remove,
-	.driver		= {
-		.name	= "omap-usb3",
-		.owner	= THIS_MODULE,
-		.pm	= DEV_PM_OPS,
-		.of_match_table = of_match_ptr(omap_usb3_id_table),
-	},
-};
-
-module_platform_driver(omap_usb3_driver);
-
-MODULE_ALIAS("platform: omap_usb3");
-MODULE_AUTHOR("Texas Instruments Inc.");
-MODULE_DESCRIPTION("OMAP USB3 phy driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index 551e0a6c0e22..388d89f6b141 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -177,15 +177,15 @@ static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
 	struct clk *clk;
 	int retval;
 
-	pdata = dev_get_platdata(&pdev->dev);
+	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		dev_err(dev, "No platform data\n");
 		return -EINVAL;
 	}
 
-	clk = devm_clk_get(&pdev->dev, "usbhs");
+	clk = devm_clk_get(dev, "usbhs");
 	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "Can't get the clock\n");
+		dev_err(dev, "Can't get the clock\n");
 		return PTR_ERR(clk);
 	}
 
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 214172b68d5d..04778cf80d60 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -27,7 +27,7 @@
 #include <linux/io.h>
 #include <linux/usb/musb-omap.h>
 #include <linux/usb/phy_companion.h>
-#include <linux/usb/omap_usb.h>
+#include <linux/phy/omap_usb.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
index 217339dd7a90..17ea3f271bd8 100644
--- a/drivers/usb/phy/phy-ulpi.c
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -47,6 +47,8 @@ struct ulpi_info {
 static struct ulpi_info ulpi_ids[] = {
 	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
 	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
+	ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
 };
 
 static int ulpi_set_otg_flags(struct usb_phy *phy)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 82371f61f23d..2d72aa3564a3 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -323,11 +323,11 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (r)
 		goto out;
 
-	dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__);
+	dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__);
 	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (r) {
-		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
-			" error %d\n", __func__, r);
+		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
+			__func__, r);
 		ch341_close(port);
 		goto out;
 	}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 0ac3b3b3236c..2916dea3ede8 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -220,7 +220,7 @@ static int cyberjack_write(struct tty_struct *tty,
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
 			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d",
+				"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 			/* Throw away data. No better idea what to do with it. */
 			priv->wrfilled = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index bccb1223143a..01bf53392819 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -279,7 +279,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 			 * the generic firmware, but are not used with
 			 * NMEA and SiRF protocols */
 			dev_dbg(&port->dev,
-				"%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS",
+				"%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
 				__func__, new_rate);
 			return -1;
 		}
@@ -1224,7 +1224,6 @@ static void cypress_write_int_callback(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct device *dev = &urb->dev->dev;
-	int result;
 	int status = urb->status;
 
 	switch (status) {
@@ -1239,21 +1238,9 @@ static void cypress_write_int_callback(struct urb *urb)
 			__func__, status);
 		priv->write_urb_in_use = 0;
 		return;
-	case -EPIPE: /* no break needed; clear halt and resubmit */
-		if (!priv->comm_is_ok)
-			break;
-		usb_clear_halt(port->serial->dev, 0x02);
-		/* error in the urb, so we have to resubmit it */
-		dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
-			__func__, status);
-		port->interrupt_out_urb->transfer_buffer_length = 1;
-		result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
-		if (!result)
-			return;
-		dev_err(dev, "%s - failed resubmitting write urb, error %d\n",
-			__func__, result);
-		cypress_set_dead(port);
-		break;
+	case -EPIPE:
+		/* Cannot call usb_clear_halt while in_interrupt */
+		/* FALLTHROUGH */
 	default:
 		dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
 			__func__, status);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index b63ce023f96f..1bd192290b08 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -332,9 +332,9 @@ void usb_serial_generic_process_read_urb(struct urb *urb)
 	 * stuff like 3G modems, so shortcircuit it in the 99.9999999% of
 	 * cases where the USB serial is not a console anyway.
 	 */
-	if (!port->port.console || !port->sysrq)
+	if (!port->port.console || !port->sysrq) {
 		tty_insert_flip_string(&port->port, ch, urb->actual_length);
-	else {
+	} else {
 		for (i = 0; i < urb->actual_length; i++, ch++) {
 			if (!usb_serial_handle_sysrq_char(port, *ch))
 				tty_insert_flip_char(&port->port, *ch, TTY_NORMAL);
@@ -359,24 +359,38 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 
 	dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i,
 							urb->actual_length);
-
-	if (urb->status) {
-		dev_dbg(&port->dev, "%s - non-zero urb status: %d\n",
-			__func__, urb->status);
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+							__func__, urb->status);
 		return;
+	case -EPIPE:
+		dev_err(&port->dev, "%s - urb stopped: %d\n",
+							__func__, urb->status);
+		return;
+	default:
+		dev_err(&port->dev, "%s - nonzero urb status: %d\n",
+							__func__, urb->status);
+		goto resubmit;
 	}
 
 	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
 	port->serial->type->process_read_urb(urb);
 
+resubmit:
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
 	if (!port->throttled) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC);
-	} else
+	} else {
 		spin_unlock_irqrestore(&port->lock, flags);
+	}
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
@@ -384,29 +398,38 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
 		if (port->write_urbs[i] == urb)
 			break;
-
+	}
 	spin_lock_irqsave(&port->lock, flags);
 	port->tx_bytes -= urb->transfer_buffer_length;
 	set_bit(i, &port->write_urbs_free);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (status) {
-		dev_dbg(&port->dev, "%s - non-zero urb status: %d\n",
-			__func__, status);
-
-		spin_lock_irqsave(&port->lock, flags);
-		kfifo_reset_out(&port->write_fifo);
-		spin_unlock_irqrestore(&port->lock, flags);
-	} else {
-		usb_serial_generic_write_start(port, GFP_ATOMIC);
+	switch (urb->status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+							__func__, urb->status);
+		return;
+	case -EPIPE:
+		dev_err_console(port, "%s - urb stopped: %d\n",
+							__func__, urb->status);
+		return;
+	default:
+		dev_err_console(port, "%s - nonzero urb status: %d\n",
+							__func__, urb->status);
+		goto resubmit;
 	}
 
+resubmit:
+	usb_serial_generic_write_start(port, GFP_ATOMIC);
 	usb_serial_port_softint(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index d00dae17d520..5ad4a0fb4b26 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1151,7 +1151,7 @@ static ssize_t vcc_mode_store(struct device *dev,
 		goto fail_store_vcc_mode;
 	}
 
-	dev_dbg(dev, "%s: setting vcc_mode = %ld", __func__, v);
+	dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v);
 
 	if ((v != 3) && (v != 5)) {
 		dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 265c6776b081..d3acaead5a81 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -397,17 +397,6 @@ static void	usa26_instat_callback(struct urb *urb)
 
 	msg = (struct keyspan_usa26_portStatusMessage *)data;
 
-#if 0
-	dev_dbg(&urb->dev->dev,
-		"%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
-		__func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr,
-		msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled,
-		msg->controlResponse);
-#endif
-
-	/* Now do something useful with the data */
-
-
 	/* Check port number from message and retrieve private data */
 	if (msg->port >= serial->num_ports) {
 		dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
@@ -523,9 +512,6 @@ static void	usa28_instat_callback(struct urb *urb)
 		goto exit;
 	}
 
-	/*dev_dbg(&urb->dev->dev, "%s %12ph", __func__, data);*/
-
-	/* Now do something useful with the data */
 	msg = (struct keyspan_usa28_portStatusMessage *)data;
 
 	/* Check port number from message and retrieve private data */
@@ -605,9 +591,6 @@ static void	usa49_instat_callback(struct urb *urb)
 		goto exit;
 	}
 
-	/*dev_dbg(&urb->dev->dev, "%s: %11ph", __func__, data);*/
-
-	/* Now do something useful with the data */
 	msg = (struct keyspan_usa49_portStatusMessage *)data;
 
 	/* Check port number from message and retrieve private data */
@@ -1793,12 +1776,6 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
-#if 0
-	else {
-		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__,
-		    this_urb->transfer_buffer_length);
-	}
-#endif
 
 	return 0;
 }
@@ -1976,13 +1953,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
-#if 0
-	else {
-		dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__,
-			outcont_urb, this_urb->transfer_buffer_length,
-			usb_pipeendpoint(this_urb->pipe));
-	}
-#endif
 
 	return 0;
 }
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e972412b614b..742d827f876c 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -189,7 +189,7 @@ exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&port->dev,
-			"%s - usb_submit_urb failed with result %d",
+			"%s - usb_submit_urb failed with result %d\n",
 			__func__, retval);
 }
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index c88cc4966b23..d7440b7557af 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -201,7 +201,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	else {
 		status = get_unaligned_le16(status_buf);
 
-		dev_info(&port->serial->dev->dev, "read status %x %x",
+		dev_info(&port->serial->dev->dev, "read status %x %x\n",
 			 status_buf[0], status_buf[1]);
 
 		*line_state_p = klsi_105_status2linestate(status);
@@ -464,7 +464,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		priv->cfg.baudrate = kl5kusb105a_sio_b115200;
 		break;
 	default:
-		dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600");
+		dev_dbg(dev, "unsupported baudrate, using 9600\n");
 		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
 		baud = 9600;
 		break;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 618c1c1f227e..fee242387f55 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -557,7 +557,8 @@ static int kobil_ioctl(struct tty_struct *tty,
 			);
 
 		dev_dbg(&port->dev,
-			"%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result);
+			"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
+			__func__, result);
 		kfree(transfer_buffer);
 		return (result < 0) ? -EIO: 0;
 	default:
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4eb277225a77..dfd728a263d2 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -209,7 +209,7 @@ static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 				     index, NULL, 0, MOS_WDR_TIMEOUT);
 	if (status < 0)
 		dev_err(&usbdev->dev,
-			"mos7720: usb_control_msg() failed: %d", status);
+			"mos7720: usb_control_msg() failed: %d\n", status);
 	return status;
 }
 
@@ -240,7 +240,7 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 		*data = *buf;
 	else if (status < 0)
 		dev_err(&usbdev->dev,
-			"mos7720: usb_control_msg() failed: %d", status);
+			"mos7720: usb_control_msg() failed: %d\n", status);
 	kfree(buf);
 
 	return status;
@@ -399,7 +399,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 			      &mos_parport->deferred_urbs);
 		spin_unlock_irqrestore(&mos_parport->listlock, flags);
 		tasklet_schedule(&mos_parport->urb_tasklet);
-		dev_dbg(&usbdev->dev, "tasklet scheduled");
+		dev_dbg(&usbdev->dev, "tasklet scheduled\n");
 		return 0;
 	}
 
@@ -418,7 +418,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 	mutex_unlock(&serial->disc_mutex);
 	if (ret_val) {
 		dev_err(&usbdev->dev,
-			"%s: submit_urb() failed: %d", __func__, ret_val);
+			"%s: submit_urb() failed: %d\n", __func__, ret_val);
 		spin_lock_irqsave(&mos_parport->listlock, flags);
 		list_del(&urbtrack->urblist_entry);
 		spin_unlock_irqrestore(&mos_parport->listlock, flags);
@@ -656,7 +656,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp,
 	parport_epilogue(pp);
 	if (retval) {
 		dev_err(&mos_parport->serial->dev->dev,
-			"mos7720: usb_bulk_msg() failed: %d", retval);
+			"mos7720: usb_bulk_msg() failed: %d\n", retval);
 		return 0;
 	}
 	return actual_len;
@@ -875,7 +875,7 @@ static void mos7715_interrupt_callback(struct urb *urb)
 	if (!(iir & 0x01)) {	/* serial port interrupt pending */
 		switch (iir & 0x0f) {
 		case SERIAL_IIR_RLS:
-			dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n\n");
+			dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n");
 			break;
 		case SERIAL_IIR_CTI:
 			dev_dbg(dev, "Serial Port: Receiver time out\n");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index e9d967ff521b..393be562d875 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -522,11 +522,11 @@ static void mos7840_set_led_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d",
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
 			__func__, urb->status);
 		break;
 	default:
-		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d",
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
 			__func__, urb->status);
 	}
 }
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 7725ed261ed6..504f5bff79c0 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -372,7 +372,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 device_port, data, 2, QT2_USB_TIMEOUT);
 
 	if (status < 0) {
-		dev_err(&port->dev, "%s - open port failed %i", __func__,
+		dev_err(&port->dev, "%s - open port failed %i\n", __func__,
 			status);
 		kfree(data);
 		return status;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 4ec04f73c800..ef0dbf0703c5 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -220,9 +220,9 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
 			      0, GET_UART_STATUS_MSR, buf, 1, 100);
 	if (ret < 0)
-		dev_err(&port->dev, "failed to get modem status: %d", ret);
+		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
 
-	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x", ret, *buf);
+	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 	*status = *buf;
 	kfree(buf);
 
@@ -342,8 +342,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	case 1000000:
 			buf[0] = 0x0b;	break;
 	default:
-		dev_err(&port->dev, "spcp825 driver does not support the "
-			"baudrate requested, using default of 9600.\n");
+		dev_err(&port->dev, "unsupported baudrate, using 9600\n");
 	}
 
 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 9fa7dd413e83..8fceec7298e0 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -74,9 +74,7 @@ static void symbol_int_callback(struct urb *urb)
 		tty_insert_flip_string(&port->port, &data[1], data_length);
 		tty_flip_buffer_push(&port->port);
 	} else {
-		dev_dbg(&port->dev,
-			"Improper amount of data received from the device, "
-			"%d bytes", urb->actual_length);
+		dev_dbg(&port->dev, "%s - short packet\n", __func__);
 	}
 
 exit:
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ec7cea585663..3dd3ff8c50d3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -293,7 +293,7 @@ static int ti_startup(struct usb_serial *serial)
 	int status;
 
 	dev_dbg(&dev->dev,
-		"%s - product 0x%4X, num configurations %d, configuration value %d",
+		"%s - product 0x%4X, num configurations %d, configuration value %d\n",
 		__func__, le16_to_cpu(dev->descriptor.idProduct),
 		dev->descriptor.bNumConfigurations,
 		dev->actconfig->desc.bConfigurationValue);
@@ -803,7 +803,7 @@ static void ti_set_termios(struct tty_struct *tty,
 		tty_encode_baud_rate(tty, baud, baud);
 
 	dev_dbg(&port->dev,
-		"%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
+		"%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
 		__func__, baud, config->wBaudRate, config->wFlags,
 		config->bDataBits, config->bParity, config->bStopBits,
 		config->cXon, config->cXoff, config->bUartMode);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 7c9dc28640bb..81fc0dfcfdcf 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -868,7 +868,7 @@ static int usb_serial_probe(struct usb_interface *interface,
 	max_endpoints = max(max_endpoints, (int)serial->num_ports);
 	serial->num_port_pointers = max_endpoints;
 
-	dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints);
+	dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
 	for (i = 0; i < max_endpoints; ++i) {
 		port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 		if (!port)
@@ -923,9 +923,8 @@ static int usb_serial_probe(struct usb_interface *interface,
 		port = serial->port[i];
 		if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 			goto probe_error;
-		buffer_size = serial->type->bulk_out_size;
-		if (!buffer_size)
-			buffer_size = usb_endpoint_maxp(endpoint);
+		buffer_size = max_t(int, serial->type->bulk_out_size,
+						usb_endpoint_maxp(endpoint));
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 
@@ -1034,7 +1033,7 @@ static int usb_serial_probe(struct usb_interface *interface,
 	for (i = 0; i < num_ports; ++i) {
 		port = serial->port[i];
 		dev_set_name(&port->dev, "ttyUSB%d", port->minor);
-		dev_dbg(ddev, "registering %s", dev_name(&port->dev));
+		dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
 		device_enable_async_suspend(&port->dev);
 
 		retval = device_add(&port->dev);
@@ -1161,9 +1160,9 @@ static int usb_serial_reset_resume(struct usb_interface *intf)
 	usb_serial_unpoison_port_urbs(serial);
 
 	serial->suspending = 0;
-	if (serial->type->reset_resume)
+	if (serial->type->reset_resume) {
 		rv = serial->type->reset_resume(serial);
-	else {
+	} else {
 		rv = -EOPNOTSUPP;
 		intf->needs_binding = 1;
 	}
@@ -1338,9 +1337,9 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 	if (retval) {
 		pr_err("problem %d when registering driver %s\n", retval, driver->description);
 		list_del(&driver->driver_list);
-	} else
+	} else {
 		pr_info("USB Serial support registered for %s\n", driver->description);
-
+	}
 	mutex_unlock(&table_lock);
 	return retval;
 }
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 1dd0604d1911..13b5bfbaf951 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -204,7 +204,7 @@ config USB_STORAGE_ENE_UB6250
 
 config USB_UAS
 	tristate "USB Attached SCSI"
-	depends on SCSI && BROKEN
+	depends on SCSI && USB_STORAGE
 	help
 	  The USB Attached SCSI protocol is supported by some USB
 	  storage devices.  It permits higher performance by supporting
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
new file mode 100644
index 000000000000..bb05b984d5f6
--- /dev/null
+++ b/drivers/usb/storage/uas-detect.h
@@ -0,0 +1,96 @@
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+static int uas_is_interface(struct usb_host_interface *intf)
+{
+	return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
+		intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
+		intf->desc.bInterfaceProtocol == USB_PR_UAS);
+}
+
+static int uas_isnt_supported(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	dev_warn(&udev->dev, "The driver for the USB controller %s does not "
+			"support scatter-gather which is\n",
+			hcd->driver->description);
+	dev_warn(&udev->dev, "required by the UAS driver. Please try an"
+			"alternative USB controller if you wish to use UAS.\n");
+	return -ENODEV;
+}
+
+static int uas_find_uas_alt_setting(struct usb_interface *intf)
+{
+	int i;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int sg_supported = udev->bus->sg_tablesize != 0;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		struct usb_host_interface *alt = &intf->altsetting[i];
+
+		if (uas_is_interface(alt)) {
+			if (!sg_supported)
+				return uas_isnt_supported(udev);
+			return alt->desc.bAlternateSetting;
+		}
+	}
+
+	return -ENODEV;
+}
+
+static int uas_find_endpoints(struct usb_host_interface *alt,
+			      struct usb_host_endpoint *eps[])
+{
+	struct usb_host_endpoint *endpoint = alt->endpoint;
+	unsigned i, n_endpoints = alt->desc.bNumEndpoints;
+
+	for (i = 0; i < n_endpoints; i++) {
+		unsigned char *extra = endpoint[i].extra;
+		int len = endpoint[i].extralen;
+		while (len >= 3) {
+			if (extra[1] == USB_DT_PIPE_USAGE) {
+				unsigned pipe_id = extra[2];
+				if (pipe_id > 0 && pipe_id < 5)
+					eps[pipe_id - 1] = &endpoint[i];
+				break;
+			}
+			len -= extra[0];
+			extra += extra[0];
+		}
+	}
+
+	if (!eps[0] || !eps[1] || !eps[2] || !eps[3])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int uas_use_uas_driver(struct usb_interface *intf,
+			      const struct usb_device_id *id)
+{
+	struct usb_host_endpoint *eps[4] = { };
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	unsigned long flags = id->driver_info;
+	int r, alt;
+
+	usb_stor_adjust_quirks(udev, &flags);
+
+	if (flags & US_FL_IGNORE_UAS)
+		return 0;
+
+	if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams)
+		return 0;
+
+	alt = uas_find_uas_alt_setting(intf);
+	if (alt < 0)
+		return 0;
+
+	r = uas_find_endpoints(&intf->altsetting[alt], eps);
+	if (r < 0)
+		return 0;
+
+	return 1;
+}
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index d966b59f7d7b..a7ac97cc5949 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -2,6 +2,7 @@
  * USB Attached SCSI
  * Note that this is not the same as the USB Mass Storage driver
  *
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013
  * Copyright Matthew Wilcox for Intel Corp, 2010
  * Copyright Sarah Sharp for Intel Corp, 2010
  *
@@ -13,17 +14,21 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb_usual.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/storage.h>
 #include <linux/usb/uas.h>
 
 #include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
+#include "uas-detect.h"
+
 /*
  * The r00-r01c specs define this version of the SENSE IU data structure.
  * It's still in use by several different firmware releases.
@@ -45,12 +50,17 @@ struct uas_dev_info {
 	struct usb_anchor sense_urbs;
 	struct usb_anchor data_urbs;
 	int qdepth, resetting;
-	struct response_ui response;
+	struct response_iu response;
 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
 	unsigned use_streams:1;
 	unsigned uas_sense_old:1;
+	unsigned running_task:1;
+	unsigned shutdown:1;
 	struct scsi_cmnd *cmnd;
 	spinlock_t lock;
+	struct work_struct work;
+	struct list_head inflight_list;
+	struct list_head dead_list;
 };
 
 enum {
@@ -85,103 +95,117 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 				struct uas_dev_info *devinfo, gfp_t gfp);
 static void uas_do_work(struct work_struct *work);
 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
+static void uas_free_streams(struct uas_dev_info *devinfo);
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller);
 
-static DECLARE_WORK(uas_work, uas_do_work);
-static DEFINE_SPINLOCK(uas_work_lock);
-static LIST_HEAD(uas_work_list);
-
+/* Must be called with devinfo->lock held, will temporary unlock the lock */
 static void uas_unlink_data_urbs(struct uas_dev_info *devinfo,
-				 struct uas_cmd_info *cmdinfo)
+				 struct uas_cmd_info *cmdinfo,
+				 unsigned long *lock_flags)
 {
-	unsigned long flags;
-
 	/*
 	 * The UNLINK_DATA_URBS flag makes sure uas_try_complete
 	 * (called by urb completion) doesn't release cmdinfo
 	 * underneath us.
 	 */
-	spin_lock_irqsave(&devinfo->lock, flags);
 	cmdinfo->state |= UNLINK_DATA_URBS;
-	spin_unlock_irqrestore(&devinfo->lock, flags);
+	spin_unlock_irqrestore(&devinfo->lock, *lock_flags);
 
 	if (cmdinfo->data_in_urb)
 		usb_unlink_urb(cmdinfo->data_in_urb);
 	if (cmdinfo->data_out_urb)
 		usb_unlink_urb(cmdinfo->data_out_urb);
 
-	spin_lock_irqsave(&devinfo->lock, flags);
+	spin_lock_irqsave(&devinfo->lock, *lock_flags);
 	cmdinfo->state &= ~UNLINK_DATA_URBS;
-	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
 static void uas_do_work(struct work_struct *work)
 {
+	struct uas_dev_info *devinfo =
+		container_of(work, struct uas_dev_info, work);
 	struct uas_cmd_info *cmdinfo;
-	struct uas_cmd_info *temp;
-	struct list_head list;
 	unsigned long flags;
 	int err;
 
-	spin_lock_irq(&uas_work_lock);
-	list_replace_init(&uas_work_list, &list);
-	spin_unlock_irq(&uas_work_lock);
-
-	list_for_each_entry_safe(cmdinfo, temp, &list, list) {
+	spin_lock_irqsave(&devinfo->lock, flags);
+	list_for_each_entry(cmdinfo, &devinfo->inflight_list, list) {
 		struct scsi_pointer *scp = (void *)cmdinfo;
-		struct scsi_cmnd *cmnd = container_of(scp,
-							struct scsi_cmnd, SCp);
-		struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
-		spin_lock_irqsave(&devinfo->lock, flags);
-		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+		struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd,
+						      SCp);
+
+		if (!(cmdinfo->state & IS_IN_WORK_LIST))
+			continue;
+
+		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
 		if (!err)
 			cmdinfo->state &= ~IS_IN_WORK_LIST;
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		if (err) {
-			list_del(&cmdinfo->list);
-			spin_lock_irq(&uas_work_lock);
-			list_add_tail(&cmdinfo->list, &uas_work_list);
-			spin_unlock_irq(&uas_work_lock);
-			schedule_work(&uas_work);
-		}
+		else
+			schedule_work(&devinfo->work);
 	}
+	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
-static void uas_abort_work(struct uas_dev_info *devinfo)
+static void uas_mark_cmd_dead(struct uas_dev_info *devinfo,
+			      struct uas_cmd_info *cmdinfo,
+			      int result, const char *caller)
+{
+	struct scsi_pointer *scp = (void *)cmdinfo;
+	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
+
+	uas_log_cmd_state(cmnd, caller);
+	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
+	WARN_ON_ONCE(cmdinfo->state & COMMAND_ABORTED);
+	cmdinfo->state |= COMMAND_ABORTED;
+	cmdinfo->state &= ~IS_IN_WORK_LIST;
+	cmnd->result = result << 16;
+	list_move_tail(&cmdinfo->list, &devinfo->dead_list);
+}
+
+static void uas_abort_inflight(struct uas_dev_info *devinfo, int result,
+			       const char *caller)
 {
 	struct uas_cmd_info *cmdinfo;
 	struct uas_cmd_info *temp;
-	struct list_head list;
 	unsigned long flags;
 
-	spin_lock_irq(&uas_work_lock);
-	list_replace_init(&uas_work_list, &list);
-	spin_unlock_irq(&uas_work_lock);
+	spin_lock_irqsave(&devinfo->lock, flags);
+	list_for_each_entry_safe(cmdinfo, temp, &devinfo->inflight_list, list)
+		uas_mark_cmd_dead(devinfo, cmdinfo, result, caller);
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+}
+
+static void uas_add_work(struct uas_cmd_info *cmdinfo)
+{
+	struct scsi_pointer *scp = (void *)cmdinfo;
+	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
+	struct uas_dev_info *devinfo = cmnd->device->hostdata;
+
+	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
+	cmdinfo->state |= IS_IN_WORK_LIST;
+	schedule_work(&devinfo->work);
+}
+
+static void uas_zap_dead(struct uas_dev_info *devinfo)
+{
+	struct uas_cmd_info *cmdinfo;
+	struct uas_cmd_info *temp;
+	unsigned long flags;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
-	list_for_each_entry_safe(cmdinfo, temp, &list, list) {
+	list_for_each_entry_safe(cmdinfo, temp, &devinfo->dead_list, list) {
 		struct scsi_pointer *scp = (void *)cmdinfo;
-		struct scsi_cmnd *cmnd = container_of(scp,
-							struct scsi_cmnd, SCp);
-		struct uas_dev_info *di = (void *)cmnd->device->hostdata;
-
-		if (di == devinfo) {
-			cmdinfo->state |= COMMAND_ABORTED;
-			cmdinfo->state &= ~IS_IN_WORK_LIST;
-			if (devinfo->resetting) {
-				/* uas_stat_cmplt() will not do that
-				 * when a device reset is in
-				 * progress */
-				cmdinfo->state &= ~COMMAND_INFLIGHT;
-			}
-			uas_try_complete(cmnd, __func__);
-		} else {
-			/* not our uas device, relink into list */
-			list_del(&cmdinfo->list);
-			spin_lock_irq(&uas_work_lock);
-			list_add_tail(&cmdinfo->list, &uas_work_list);
-			spin_unlock_irq(&uas_work_lock);
-		}
+		struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd,
+						      SCp);
+		uas_log_cmd_state(cmnd, __func__);
+		WARN_ON_ONCE(!(cmdinfo->state & COMMAND_ABORTED));
+		/* all urbs are killed, clear inflight bits */
+		cmdinfo->state &= ~(COMMAND_INFLIGHT |
+				    DATA_IN_URB_INFLIGHT |
+				    DATA_OUT_URB_INFLIGHT);
+		uas_try_complete(cmnd, __func__);
 	}
+	devinfo->running_task = 0;
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
@@ -259,20 +283,19 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
 
-	WARN_ON(!spin_is_locked(&devinfo->lock));
+	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
 	if (cmdinfo->state & (COMMAND_INFLIGHT |
 			      DATA_IN_URB_INFLIGHT |
 			      DATA_OUT_URB_INFLIGHT |
 			      UNLINK_DATA_URBS))
 		return -EBUSY;
-	BUG_ON(cmdinfo->state & COMMAND_COMPLETED);
+	WARN_ON_ONCE(cmdinfo->state & COMMAND_COMPLETED);
 	cmdinfo->state |= COMMAND_COMPLETED;
 	usb_free_urb(cmdinfo->data_in_urb);
 	usb_free_urb(cmdinfo->data_out_urb);
-	if (cmdinfo->state & COMMAND_ABORTED) {
+	if (cmdinfo->state & COMMAND_ABORTED)
 		scmd_printk(KERN_INFO, cmnd, "abort completed\n");
-		cmnd->result = DID_ABORT << 16;
-	}
+	list_del(&cmdinfo->list);
 	cmnd->scsi_done(cmnd);
 	return 0;
 }
@@ -286,11 +309,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 	cmdinfo->state |= direction | SUBMIT_STATUS_URB;
 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
 	if (err) {
-		spin_lock(&uas_work_lock);
-		list_add_tail(&cmdinfo->list, &uas_work_list);
-		cmdinfo->state |= IS_IN_WORK_LIST;
-		spin_unlock(&uas_work_lock);
-		schedule_work(&uas_work);
+		uas_add_work(cmdinfo);
 	}
 }
 
@@ -298,14 +317,20 @@ static void uas_stat_cmplt(struct urb *urb)
 {
 	struct iu *iu = urb->transfer_buffer;
 	struct Scsi_Host *shost = urb->context;
-	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 	struct scsi_cmnd *cmnd;
 	struct uas_cmd_info *cmdinfo;
 	unsigned long flags;
 	u16 tag;
 
 	if (urb->status) {
-		dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
+		if (urb->status == -ENOENT) {
+			dev_err(&urb->dev->dev, "stat urb: killed, stream %d\n",
+				urb->stream_id);
+		} else {
+			dev_err(&urb->dev->dev, "stat urb: status %d\n",
+				urb->status);
+		}
 		usb_free_urb(urb);
 		return;
 	}
@@ -324,6 +349,9 @@ static void uas_stat_cmplt(struct urb *urb)
 
 	if (!cmnd) {
 		if (iu->iu_id == IU_ID_RESPONSE) {
+			if (!devinfo->running_task)
+				dev_warn(&urb->dev->dev,
+				    "stat urb: recv unexpected response iu\n");
 			/* store results for uas_eh_task_mgmt() */
 			memcpy(&devinfo->response, iu, sizeof(devinfo->response));
 		}
@@ -346,17 +374,25 @@ static void uas_stat_cmplt(struct urb *urb)
 			uas_sense(urb, cmnd);
 		if (cmnd->result != 0) {
 			/* cancel data transfers on error */
-			spin_unlock_irqrestore(&devinfo->lock, flags);
-			uas_unlink_data_urbs(devinfo, cmdinfo);
-			spin_lock_irqsave(&devinfo->lock, flags);
+			uas_unlink_data_urbs(devinfo, cmdinfo, &flags);
 		}
 		cmdinfo->state &= ~COMMAND_INFLIGHT;
 		uas_try_complete(cmnd, __func__);
 		break;
 	case IU_ID_READ_READY:
+		if (!cmdinfo->data_in_urb ||
+				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
+			scmd_printk(KERN_ERR, cmnd, "unexpected read rdy\n");
+			break;
+		}
 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
 		break;
 	case IU_ID_WRITE_READY:
+		if (!cmdinfo->data_out_urb ||
+				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
+			scmd_printk(KERN_ERR, cmnd, "unexpected write rdy\n");
+			break;
+		}
 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
 		break;
 	default:
@@ -383,8 +419,15 @@ static void uas_data_cmplt(struct urb *urb)
 		sdb = scsi_out(cmnd);
 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
 	}
-	BUG_ON(sdb == NULL);
-	if (urb->status) {
+	if (sdb == NULL) {
+		WARN_ON_ONCE(1);
+	} else if (urb->status) {
+		if (urb->status != -ECONNRESET) {
+			uas_log_cmd_state(cmnd, __func__);
+			scmd_printk(KERN_ERR, cmnd,
+				"data cmplt err %d stream %d\n",
+				urb->status, urb->stream_id);
+		}
 		/* error: no data transfered */
 		sdb->resid = sdb->length;
 	} else {
@@ -394,6 +437,17 @@ static void uas_data_cmplt(struct urb *urb)
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
+static void uas_cmd_cmplt(struct urb *urb)
+{
+	struct scsi_cmnd *cmnd = urb->context;
+
+	if (urb->status) {
+		uas_log_cmd_state(cmnd, __func__);
+		scmd_printk(KERN_ERR, cmnd, "cmd cmplt err %d\n", urb->status);
+	}
+	usb_free_urb(urb);
+}
+
 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 				      unsigned int pipe, u16 stream_id,
 				      struct scsi_cmnd *cmnd,
@@ -408,8 +462,7 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 		goto out;
 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
 			  uas_data_cmplt, cmnd);
-	if (devinfo->use_streams)
-		urb->stream_id = stream_id;
+	urb->stream_id = stream_id;
 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
 	urb->sg = sdb->table.sgl;
  out:
@@ -442,7 +495,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 }
 
 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-					struct scsi_cmnd *cmnd, u16 stream_id)
+					struct scsi_cmnd *cmnd)
 {
 	struct usb_device *udev = devinfo->udev;
 	struct scsi_device *sdev = cmnd->device;
@@ -472,7 +525,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
 
 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
-							usb_free_urb, NULL);
+							uas_cmd_cmplt, cmnd);
 	urb->transfer_flags |= URB_FREE_BUFFER;
  out:
 	return urb;
@@ -512,13 +565,17 @@ static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp,
 	}
 
 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu),
-			  usb_free_urb, NULL);
+			  uas_cmd_cmplt, cmnd);
 	urb->transfer_flags |= URB_FREE_BUFFER;
 
+	usb_anchor_urb(urb, &devinfo->cmd_urbs);
 	err = usb_submit_urb(urb, gfp);
-	if (err)
+	if (err) {
+		usb_unanchor_urb(urb);
+		uas_log_cmd_state(cmnd, __func__);
+		scmd_printk(KERN_ERR, cmnd, "task submission err %d\n", err);
 		goto err;
-	usb_anchor_urb(urb, &devinfo->cmd_urbs);
+	}
 
 	return 0;
 
@@ -533,38 +590,43 @@ err:
  * daft to me.
  */
 
-static int uas_submit_sense_urb(struct Scsi_Host *shost,
-				gfp_t gfp, unsigned int stream)
+static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd,
+					gfp_t gfp, unsigned int stream)
 {
-	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
+	struct Scsi_Host *shost = cmnd->device->host;
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 	struct urb *urb;
+	int err;
 
 	urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream);
 	if (!urb)
-		return SCSI_MLQUEUE_DEVICE_BUSY;
-	if (usb_submit_urb(urb, gfp)) {
+		return NULL;
+	usb_anchor_urb(urb, &devinfo->sense_urbs);
+	err = usb_submit_urb(urb, gfp);
+	if (err) {
+		usb_unanchor_urb(urb);
+		uas_log_cmd_state(cmnd, __func__);
 		shost_printk(KERN_INFO, shost,
-			     "sense urb submission failure\n");
+			     "sense urb submission error %d stream %d\n",
+			     err, stream);
 		usb_free_urb(urb);
-		return SCSI_MLQUEUE_DEVICE_BUSY;
+		return NULL;
 	}
-	usb_anchor_urb(urb, &devinfo->sense_urbs);
-	return 0;
+	return urb;
 }
 
 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 			   struct uas_dev_info *devinfo, gfp_t gfp)
 {
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+	struct urb *urb;
 	int err;
 
-	WARN_ON(!spin_is_locked(&devinfo->lock));
+	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
-		err = uas_submit_sense_urb(cmnd->device->host, gfp,
-					   cmdinfo->stream);
-		if (err) {
-			return err;
-		}
+		urb = uas_submit_sense_urb(cmnd, gfp, cmdinfo->stream);
+		if (!urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
 	}
 
@@ -578,14 +640,18 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	}
 
 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
-		if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) {
+		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
+		err = usb_submit_urb(cmdinfo->data_in_urb, gfp);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->data_in_urb);
+			uas_log_cmd_state(cmnd, __func__);
 			scmd_printk(KERN_INFO, cmnd,
-					"data in urb submission failure\n");
+				"data in urb submission error %d stream %d\n",
+				err, cmdinfo->data_in_urb->stream_id);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
 		cmdinfo->state |= DATA_IN_URB_INFLIGHT;
-		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
 	}
 
 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
@@ -598,33 +664,37 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	}
 
 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
-		if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) {
+		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
+		err = usb_submit_urb(cmdinfo->data_out_urb, gfp);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->data_out_urb);
+			uas_log_cmd_state(cmnd, __func__);
 			scmd_printk(KERN_INFO, cmnd,
-					"data out urb submission failure\n");
+				"data out urb submission error %d stream %d\n",
+				err, cmdinfo->data_out_urb->stream_id);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
-		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
 	}
 
 	if (cmdinfo->state & ALLOC_CMD_URB) {
-		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd,
-						     cmdinfo->stream);
+		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd);
 		if (!cmdinfo->cmd_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_CMD_URB;
 	}
 
 	if (cmdinfo->state & SUBMIT_CMD_URB) {
-		usb_get_urb(cmdinfo->cmd_urb);
-		if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) {
+		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
+		err = usb_submit_urb(cmdinfo->cmd_urb, gfp);
+		if (err) {
+			usb_unanchor_urb(cmdinfo->cmd_urb);
+			uas_log_cmd_state(cmnd, __func__);
 			scmd_printk(KERN_INFO, cmnd,
-					"cmd urb submission failure\n");
+				    "cmd urb submission error %d\n", err);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
-		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
-		usb_put_urb(cmdinfo->cmd_urb);
 		cmdinfo->cmd_urb = NULL;
 		cmdinfo->state &= ~SUBMIT_CMD_URB;
 		cmdinfo->state |= COMMAND_INFLIGHT;
@@ -644,18 +714,22 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 
 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
+	spin_lock_irqsave(&devinfo->lock, flags);
+
 	if (devinfo->resetting) {
 		cmnd->result = DID_ERROR << 16;
 		cmnd->scsi_done(cmnd);
+		spin_unlock_irqrestore(&devinfo->lock, flags);
 		return 0;
 	}
 
-	spin_lock_irqsave(&devinfo->lock, flags);
 	if (devinfo->cmnd) {
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
+	memset(cmdinfo, 0, sizeof(*cmdinfo));
+
 	if (blk_rq_tagged(cmnd->request)) {
 		cmdinfo->stream = cmnd->request->tag + 2;
 	} else {
@@ -692,13 +766,10 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 			spin_unlock_irqrestore(&devinfo->lock, flags);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
-		spin_lock(&uas_work_lock);
-		list_add_tail(&cmdinfo->list, &uas_work_list);
-		cmdinfo->state |= IS_IN_WORK_LIST;
-		spin_unlock(&uas_work_lock);
-		schedule_work(&uas_work);
+		uas_add_work(cmdinfo);
 	}
 
+	list_add_tail(&cmdinfo->list, &devinfo->inflight_list);
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }
@@ -709,46 +780,78 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd,
 			    const char *fname, u8 function)
 {
 	struct Scsi_Host *shost = cmnd->device->host;
-	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
-	u16 tag = devinfo->qdepth - 1;
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	u16 tag = devinfo->qdepth;
 	unsigned long flags;
+	struct urb *sense_urb;
+	int result = SUCCESS;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (devinfo->resetting) {
+		spin_unlock_irqrestore(&devinfo->lock, flags);
+		return FAILED;
+	}
+
+	if (devinfo->running_task) {
+		shost_printk(KERN_INFO, shost,
+			     "%s: %s: error already running a task\n",
+			     __func__, fname);
+		spin_unlock_irqrestore(&devinfo->lock, flags);
+		return FAILED;
+	}
+
+	devinfo->running_task = 1;
 	memset(&devinfo->response, 0, sizeof(devinfo->response));
-	if (uas_submit_sense_urb(shost, GFP_ATOMIC, tag)) {
+	sense_urb = uas_submit_sense_urb(cmnd, GFP_NOIO,
+					 devinfo->use_streams ? tag : 0);
+	if (!sense_urb) {
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s: submit sense urb failed\n",
 			     __func__, fname);
+		devinfo->running_task = 0;
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		return FAILED;
 	}
-	if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) {
+	if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) {
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s: submit task mgmt urb failed\n",
 			     __func__, fname);
+		devinfo->running_task = 0;
 		spin_unlock_irqrestore(&devinfo->lock, flags);
+		usb_kill_urb(sense_urb);
 		return FAILED;
 	}
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 
 	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) {
+		/*
+		 * Note we deliberately do not clear running_task here. If we
+		 * allow new tasks to be submitted, there is no way to figure
+		 * out if a received response_iu is for the failed task or for
+		 * the new one. A bus-reset will eventually clear running_task.
+		 */
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s timed out\n", __func__, fname);
 		return FAILED;
 	}
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+	devinfo->running_task = 0;
 	if (be16_to_cpu(devinfo->response.tag) != tag) {
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s failed (wrong tag %d/%d)\n", __func__,
 			     fname, be16_to_cpu(devinfo->response.tag), tag);
-		return FAILED;
-	}
-	if (devinfo->response.response_code != RC_TMF_COMPLETE) {
+		result = FAILED;
+	} else if (devinfo->response.response_code != RC_TMF_COMPLETE) {
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s failed (rc 0x%x)\n", __func__,
 			     fname, devinfo->response.response_code);
-		return FAILED;
+		result = FAILED;
 	}
-	return SUCCESS;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	return result;
 }
 
 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
@@ -758,22 +861,19 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 	unsigned long flags;
 	int ret;
 
-	uas_log_cmd_state(cmnd, __func__);
 	spin_lock_irqsave(&devinfo->lock, flags);
-	cmdinfo->state |= COMMAND_ABORTED;
-	if (cmdinfo->state & IS_IN_WORK_LIST) {
-		spin_lock(&uas_work_lock);
-		list_del(&cmdinfo->list);
-		cmdinfo->state &= ~IS_IN_WORK_LIST;
-		spin_unlock(&uas_work_lock);
+
+	if (devinfo->resetting) {
+		spin_unlock_irqrestore(&devinfo->lock, flags);
+		return FAILED;
 	}
+
+	uas_mark_cmd_dead(devinfo, cmdinfo, DID_ABORT, __func__);
 	if (cmdinfo->state & COMMAND_INFLIGHT) {
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK);
 	} else {
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		uas_unlink_data_urbs(devinfo, cmdinfo);
-		spin_lock_irqsave(&devinfo->lock, flags);
+		uas_unlink_data_urbs(devinfo, cmdinfo, &flags);
 		uas_try_complete(cmnd, __func__);
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		ret = SUCCESS;
@@ -795,14 +895,25 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 	struct usb_device *udev = devinfo->udev;
 	int err;
 
+	err = usb_lock_device_for_reset(udev, devinfo->intf);
+	if (err) {
+		shost_printk(KERN_ERR, sdev->host,
+			     "%s FAILED to get lock err %d\n", __func__, err);
+		return FAILED;
+	}
+
+	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
 	devinfo->resetting = 1;
-	uas_abort_work(devinfo);
+	uas_abort_inflight(devinfo, DID_RESET, __func__);
 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
 	usb_kill_anchored_urbs(&devinfo->data_urbs);
+	uas_zap_dead(devinfo);
 	err = usb_reset_device(udev);
 	devinfo->resetting = 0;
 
+	usb_unlock_device(udev);
+
 	if (err) {
 		shost_printk(KERN_INFO, sdev->host, "%s FAILED\n", __func__);
 		return FAILED;
@@ -814,7 +925,25 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 
 static int uas_slave_alloc(struct scsi_device *sdev)
 {
-	sdev->hostdata = (void *)sdev->host->hostdata[0];
+	sdev->hostdata = (void *)sdev->host->hostdata;
+
+	/* USB has unusual DMA-alignment requirements: Although the
+	 * starting address of each scatter-gather element doesn't matter,
+	 * the length of each element except the last must be divisible
+	 * by the Bulk maxpacket value.  There's currently no way to
+	 * express this by block-layer constraints, so we'll cop out
+	 * and simply require addresses to be aligned at 512-byte
+	 * boundaries.  This is okay since most block I/O involves
+	 * hardware sectors that are multiples of 512 bytes in length,
+	 * and since host controllers up through USB 2.0 have maxpacket
+	 * values no larger than 512.
+	 *
+	 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
+	 * values can be as large as 2048.  To make that work properly
+	 * will require changes to the block layer.
+	 */
+	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+
 	return 0;
 }
 
@@ -822,7 +951,7 @@ static int uas_slave_configure(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
 	scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
-	scsi_activate_tcq(sdev, devinfo->qdepth - 3);
+	scsi_activate_tcq(sdev, devinfo->qdepth - 2);
 	return 0;
 }
 
@@ -843,7 +972,14 @@ static struct scsi_host_template uas_host_template = {
 	.ordered_tag = 1,
 };
 
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+	.driver_info = (flags) }
+
 static struct usb_device_id uas_usb_ids[] = {
+#	include "unusual_uas.h"
 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
 	/* 0xaa is a prototype device I happen to have access to */
@@ -852,105 +988,55 @@ static struct usb_device_id uas_usb_ids[] = {
 };
 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
 
-static int uas_is_interface(struct usb_host_interface *intf)
-{
-	return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
-		intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
-		intf->desc.bInterfaceProtocol == USB_PR_UAS);
-}
-
-static int uas_isnt_supported(struct usb_device *udev)
-{
-	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
-	dev_warn(&udev->dev, "The driver for the USB controller %s does not "
-			"support scatter-gather which is\n",
-			hcd->driver->description);
-	dev_warn(&udev->dev, "required by the UAS driver. Please try an"
-			"alternative USB controller if you wish to use UAS.\n");
-	return -ENODEV;
-}
+#undef UNUSUAL_DEV
 
 static int uas_switch_interface(struct usb_device *udev,
-						struct usb_interface *intf)
+				struct usb_interface *intf)
 {
-	int i;
-	int sg_supported = udev->bus->sg_tablesize != 0;
-
-	for (i = 0; i < intf->num_altsetting; i++) {
-		struct usb_host_interface *alt = &intf->altsetting[i];
-
-		if (uas_is_interface(alt)) {
-			if (!sg_supported)
-				return uas_isnt_supported(udev);
-			return usb_set_interface(udev,
-						alt->desc.bInterfaceNumber,
-						alt->desc.bAlternateSetting);
-		}
-	}
+	int alt;
+
+	alt = uas_find_uas_alt_setting(intf);
+	if (alt < 0)
+		return alt;
 
-	return -ENODEV;
+	return usb_set_interface(udev,
+			intf->altsetting[0].desc.bInterfaceNumber, alt);
 }
 
-static void uas_configure_endpoints(struct uas_dev_info *devinfo)
+static int uas_configure_endpoints(struct uas_dev_info *devinfo)
 {
 	struct usb_host_endpoint *eps[4] = { };
-	struct usb_interface *intf = devinfo->intf;
 	struct usb_device *udev = devinfo->udev;
-	struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint;
-	unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
+	int r;
 
 	devinfo->uas_sense_old = 0;
 	devinfo->cmnd = NULL;
 
-	for (i = 0; i < n_endpoints; i++) {
-		unsigned char *extra = endpoint[i].extra;
-		int len = endpoint[i].extralen;
-		while (len > 1) {
-			if (extra[1] == USB_DT_PIPE_USAGE) {
-				unsigned pipe_id = extra[2];
-				if (pipe_id > 0 && pipe_id < 5)
-					eps[pipe_id - 1] = &endpoint[i];
-				break;
-			}
-			len -= extra[0];
-			extra += extra[0];
-		}
-	}
+	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
+	if (r)
+		return r;
 
-	/*
-	 * Assume that if we didn't find a control pipe descriptor, we're
-	 * using a device with old firmware that happens to be set up like
-	 * this.
-	 */
-	if (!eps[0]) {
-		devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1);
-		devinfo->status_pipe = usb_rcvbulkpipe(udev, 1);
-		devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2);
-		devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2);
-
-		eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe);
-		eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
-		eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
-	} else {
-		devinfo->cmd_pipe = usb_sndbulkpipe(udev,
-						eps[0]->desc.bEndpointAddress);
-		devinfo->status_pipe = usb_rcvbulkpipe(udev,
-						eps[1]->desc.bEndpointAddress);
-		devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
-						eps[2]->desc.bEndpointAddress);
-		devinfo->data_out_pipe = usb_sndbulkpipe(udev,
-						eps[3]->desc.bEndpointAddress);
-	}
+	devinfo->cmd_pipe = usb_sndbulkpipe(udev,
+					    usb_endpoint_num(&eps[0]->desc));
+	devinfo->status_pipe = usb_rcvbulkpipe(udev,
+					    usb_endpoint_num(&eps[1]->desc));
+	devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
+					    usb_endpoint_num(&eps[2]->desc));
+	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
+					    usb_endpoint_num(&eps[3]->desc));
 
-	devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256,
-								GFP_KERNEL);
-	if (devinfo->qdepth < 0) {
+	if (udev->speed != USB_SPEED_SUPER) {
 		devinfo->qdepth = 256;
 		devinfo->use_streams = 0;
 	} else {
+		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
+						    3, 256, GFP_KERNEL);
+		if (devinfo->qdepth < 0)
+			return devinfo->qdepth;
 		devinfo->use_streams = 1;
 	}
+
+	return 0;
 }
 
 static void uas_free_streams(struct uas_dev_info *devinfo)
@@ -964,30 +1050,23 @@ static void uas_free_streams(struct uas_dev_info *devinfo)
 	usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
 }
 
-/*
- * XXX: What I'd like to do here is register a SCSI host for each USB host in
- * the system.  Follow usb-storage's design of registering a SCSI host for
- * each USB device for the moment.  Can implement this by walking up the
- * USB hierarchy until we find a USB host.
- */
 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
-	int result;
-	struct Scsi_Host *shost;
+	int result = -ENOMEM;
+	struct Scsi_Host *shost = NULL;
 	struct uas_dev_info *devinfo;
 	struct usb_device *udev = interface_to_usbdev(intf);
 
-	if (uas_switch_interface(udev, intf))
+	if (!uas_use_uas_driver(intf, id))
 		return -ENODEV;
 
-	devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
-	if (!devinfo)
-		return -ENOMEM;
+	if (uas_switch_interface(udev, intf))
+		return -ENODEV;
 
-	result = -ENOMEM;
-	shost = scsi_host_alloc(&uas_host_template, sizeof(void *));
+	shost = scsi_host_alloc(&uas_host_template,
+				sizeof(struct uas_dev_info));
 	if (!shost)
-		goto free;
+		goto set_alt0;
 
 	shost->max_cmd_len = 16 + 252;
 	shost->max_id = 1;
@@ -995,33 +1074,40 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	shost->max_channel = 0;
 	shost->sg_tablesize = udev->bus->sg_tablesize;
 
+	devinfo = (struct uas_dev_info *)shost->hostdata;
 	devinfo->intf = intf;
 	devinfo->udev = udev;
 	devinfo->resetting = 0;
+	devinfo->running_task = 0;
+	devinfo->shutdown = 0;
 	init_usb_anchor(&devinfo->cmd_urbs);
 	init_usb_anchor(&devinfo->sense_urbs);
 	init_usb_anchor(&devinfo->data_urbs);
 	spin_lock_init(&devinfo->lock);
-	uas_configure_endpoints(devinfo);
+	INIT_WORK(&devinfo->work, uas_do_work);
+	INIT_LIST_HEAD(&devinfo->inflight_list);
+	INIT_LIST_HEAD(&devinfo->dead_list);
 
-	result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 3);
+	result = uas_configure_endpoints(devinfo);
 	if (result)
-		goto free;
+		goto set_alt0;
 
-	result = scsi_add_host(shost, &intf->dev);
+	result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
 	if (result)
-		goto deconfig_eps;
+		goto free_streams;
 
-	shost->hostdata[0] = (unsigned long)devinfo;
+	result = scsi_add_host(shost, &intf->dev);
+	if (result)
+		goto free_streams;
 
 	scsi_scan_host(shost);
 	usb_set_intfdata(intf, shost);
 	return result;
 
-deconfig_eps:
+free_streams:
 	uas_free_streams(devinfo);
- free:
-	kfree(devinfo);
+set_alt0:
+	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
 	if (shost)
 		scsi_host_put(shost);
 	return result;
@@ -1029,45 +1115,146 @@ deconfig_eps:
 
 static int uas_pre_reset(struct usb_interface *intf)
 {
-/* XXX: Need to return 1 if it's not our device in error handling */
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+
+	if (devinfo->shutdown)
+		return 0;
+
+	/* Block new requests */
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_block_requests(shost);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	/* Wait for any pending requests to complete */
+	flush_work(&devinfo->work);
+	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
+		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+		return 1;
+	}
+
+	uas_free_streams(devinfo);
+
 	return 0;
 }
 
 static int uas_post_reset(struct usb_interface *intf)
 {
-/* XXX: Need to return 1 if it's not our device in error handling */
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+
+	if (devinfo->shutdown)
+		return 0;
+
+	if (uas_configure_endpoints(devinfo) != 0) {
+		shost_printk(KERN_ERR, shost,
+			     "%s: alloc streams error after reset", __func__);
+		return 1;
+	}
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_report_bus_reset(shost, 0);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	scsi_unblock_requests(shost);
+
+	return 0;
+}
+
+static int uas_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+	/* Wait for any pending requests to complete */
+	flush_work(&devinfo->work);
+	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
+		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int uas_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int uas_reset_resume(struct usb_interface *intf)
+{
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
+
+	if (uas_configure_endpoints(devinfo) != 0) {
+		shost_printk(KERN_ERR, shost,
+			     "%s: alloc streams error after reset", __func__);
+		return -EIO;
+	}
+
+	spin_lock_irqsave(shost->host_lock, flags);
+	scsi_report_bus_reset(shost, 0);
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
 	return 0;
 }
 
 static void uas_disconnect(struct usb_interface *intf)
 {
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
-	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 
 	devinfo->resetting = 1;
-	uas_abort_work(devinfo);
+	cancel_work_sync(&devinfo->work);
+	uas_abort_inflight(devinfo, DID_NO_CONNECT, __func__);
 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
 	usb_kill_anchored_urbs(&devinfo->data_urbs);
+	uas_zap_dead(devinfo);
 	scsi_remove_host(shost);
 	uas_free_streams(devinfo);
-	kfree(devinfo);
+	scsi_host_put(shost);
 }
 
 /*
- * XXX: Should this plug into libusual so we can auto-upgrade devices from
- * Bulk-Only to UAS?
+ * Put the device back in usb-storage mode on shutdown, as some BIOS-es
+ * hang on reboot when the device is still in uas mode. Note the reset is
+ * necessary as some devices won't revert to usb-storage mode without it.
  */
+static void uas_shutdown(struct device *dev)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+
+	if (system_state != SYSTEM_RESTART)
+		return;
+
+	devinfo->shutdown = 1;
+	uas_free_streams(devinfo);
+	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	usb_reset_device(udev);
+}
+
 static struct usb_driver uas_driver = {
 	.name = "uas",
 	.probe = uas_probe,
 	.disconnect = uas_disconnect,
 	.pre_reset = uas_pre_reset,
 	.post_reset = uas_post_reset,
+	.suspend = uas_suspend,
+	.resume = uas_resume,
+	.reset_resume = uas_reset_resume,
+	.drvwrap.driver.shutdown = uas_shutdown,
 	.id_table = uas_usb_ids,
 };
 
 module_usb_driver(uas_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp");
+MODULE_AUTHOR(
+	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index adbeb255616a..f4a82291894a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2086,6 +2086,11 @@ UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
 		"Digital MP3 Audio Player",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
+/* Unusual uas devices */
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "unusual_uas.h"
+#endif
+
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(USB_SC_RBC, USB_PR_CB),
 USUAL_DEV(USB_SC_8020, USB_PR_CB),
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
new file mode 100644
index 000000000000..7244444df8ee
--- /dev/null
+++ b/drivers/usb/storage/unusual_uas.h
@@ -0,0 +1,52 @@
+/* Driver for USB Attached SCSI devices - Unusual Devices File
+ *
+ *   (c) 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the same file for the usb-storage driver, which is:
+ *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * IMPORTANT NOTE: This file must be included in another file which defines
+ * a UNUSUAL_DEV macro before this file is included.
+ */
+
+/*
+ * If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ *	- a patch that adds the entry for your device, including your
+ *	  email address right above the entry (plus maybe a brief
+ *	  explanation of the reason for the entry),
+ *	- lsusb -v output for the device
+ * Send your submission to Hans de Goede <hdegoede@redhat.com>
+ * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>
+ */
+
+/*
+ * This is an example entry for the US_FL_IGNORE_UAS flag. Once we have an
+ * actual entry using US_FL_IGNORE_UAS this entry should be removed.
+ *
+ * UNUSUAL_DEV(  0xabcd, 0x1234, 0x0100, 0x0100,
+ *		"Example",
+ *		"Storage with broken UAS",
+ *		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ *		US_FL_IGNORE_UAS),
+ */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1c0b89f2a138..f1c96261a501 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -72,6 +72,10 @@
 #include "sierra_ms.h"
 #include "option_ms.h"
 
+#if IS_ENABLED(CONFIG_USB_UAS)
+#include "uas-detect.h"
+#endif
+
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
 MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
@@ -459,14 +463,14 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
 #define TOLOWER(x) ((x) | 0x20)
 
 /* Adjust device flags based on the "quirks=" module parameter */
-static void adjust_quirks(struct us_data *us)
+void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 {
 	char *p;
-	u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
-	u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
+	u16 vid = le16_to_cpu(udev->descriptor.idVendor);
+	u16 pid = le16_to_cpu(udev->descriptor.idProduct);
 	unsigned f = 0;
 	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
-			US_FL_FIX_CAPACITY |
+			US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
 			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
@@ -537,14 +541,18 @@ static void adjust_quirks(struct us_data *us)
 		case 's':
 			f |= US_FL_SINGLE_LUN;
 			break;
+		case 'u':
+			f |= US_FL_IGNORE_UAS;
+			break;
 		case 'w':
 			f |= US_FL_NO_WP_DETECT;
 			break;
 		/* Ignore unrecognized flag characters */
 		}
 	}
-	us->fflags = (us->fflags & ~mask) | f;
+	*fflags = (*fflags & ~mask) | f;
 }
+EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
 
 /* Get the unusual_devs entries and the string descriptors */
 static int get_device_info(struct us_data *us, const struct usb_device_id *id,
@@ -564,7 +572,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 			idesc->bInterfaceProtocol :
 			unusual_dev->useTransport;
 	us->fflags = id->driver_info;
-	adjust_quirks(us);
+	usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
 
 	if (us->fflags & US_FL_IGNORE_DEVICE) {
 		dev_info(pdev, "device ignored\n");
@@ -1035,6 +1043,12 @@ static int storage_probe(struct usb_interface *intf,
 	int result;
 	int size;
 
+	/* If uas is enabled and this device can do uas then ignore it. */
+#if IS_ENABLED(CONFIG_USB_UAS)
+	if (uas_use_uas_driver(intf, id))
+		return -ENXIO;
+#endif
+
 	/*
 	 * If the device isn't standard (is handled by a subdriver
 	 * module) then don't accept it.
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 75f70f04f37b..307e339a9478 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -201,4 +201,7 @@ extern int usb_stor_probe1(struct us_data **pus,
 extern int usb_stor_probe2(struct us_data *us);
 extern void usb_stor_disconnect(struct usb_interface *intf);
 
+extern void usb_stor_adjust_quirks(struct usb_device *dev,
+		unsigned long *fflags);
+
 #endif
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 3b959e83b28e..0677139c6065 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -284,7 +284,7 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
 	struct device *dev = wusbhc->dev;
 	struct wusb_dev *wusb_dev;
 	struct wusb_port *port;
-	unsigned idx, devnum;
+	unsigned idx;
 
 	mutex_lock(&wusbhc->mutex);
 
@@ -312,8 +312,6 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
 		goto error_unlock;
 	}
 
-	devnum = idx + 2;
-
 	/* Make sure we are using no crypto on that "virtual port" */
 	wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0);
 
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index 368360f9a93a..252c7bd9218a 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -75,8 +75,6 @@ void __wa_destroy(struct wahc *wa)
 	if (wa->dti_urb) {
 		usb_kill_urb(wa->dti_urb);
 		usb_put_urb(wa->dti_urb);
-		usb_kill_urb(wa->buf_in_urb);
-		usb_put_urb(wa->buf_in_urb);
 	}
 	kfree(wa->dti_buf);
 	wa_nep_destroy(wa);
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
index a2ef84b8397e..f2a8d29e17b9 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -125,7 +125,8 @@ struct wa_rpipe {
 
 enum wa_dti_state {
 	WA_DTI_TRANSFER_RESULT_PENDING,
-	WA_DTI_ISOC_PACKET_STATUS_PENDING
+	WA_DTI_ISOC_PACKET_STATUS_PENDING,
+	WA_DTI_BUF_IN_DATA_PENDING
 };
 
 enum wa_quirks {
@@ -134,8 +135,20 @@ enum wa_quirks {
 	 * requests to be concatenated and not sent as separate packets.
 	 */
 	WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC	= 0x01,
+	/*
+	 * The Alereon HWA can be instructed to not send transfer notifications
+	 * as an optimization.
+	 */
+	WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS	= 0x02,
 };
 
+enum wa_vendor_specific_requests {
+	WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C,
+	WA_REQ_ALEREON_FEATURE_SET = 0x01,
+	WA_REQ_ALEREON_FEATURE_CLEAR = 0x00,
+};
+
+#define WA_MAX_BUF_IN_URBS	4
 /**
  * Instance of a HWA Host Controller
  *
@@ -206,7 +219,9 @@ struct wahc {
 	u32 dti_isoc_xfer_in_progress;
 	u8  dti_isoc_xfer_seg;
 	struct urb *dti_urb;		/* URB for reading xfer results */
-	struct urb *buf_in_urb;		/* URB for reading data in */
+					/* URBs for reading data in */
+	struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS];
+	int active_buf_in_urbs;		/* number of buf_in_urbs active. */
 	struct edc dti_edc;		/* DTI error density counter */
 	void *dti_buf;
 	size_t dti_buf_size;
@@ -234,6 +249,7 @@ struct wahc {
 extern int wa_create(struct wahc *wa, struct usb_interface *iface,
 	kernel_ulong_t);
 extern void __wa_destroy(struct wahc *wa);
+extern int wa_dti_start(struct wahc *wa);
 void wa_reset_all(struct wahc *wa);
 
 
@@ -275,6 +291,8 @@ static inline void wa_rpipe_init(struct wahc *wa)
 
 static inline void wa_init(struct wahc *wa)
 {
+	int index;
+
 	edc_init(&wa->nep_edc);
 	atomic_set(&wa->notifs_queued, 0);
 	wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
@@ -288,6 +306,10 @@ static inline void wa_init(struct wahc *wa)
 	INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run);
 	wa->dto_in_use = 0;
 	atomic_set(&wa->xfer_id_count, 1);
+	/* init the buf in URBs */
+	for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index)
+		usb_init_urb(&(wa->buf_in_urbs[index]));
+	wa->active_buf_in_urbs = 0;
 }
 
 /**
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 6ca80a4efc1b..6d6da127f6de 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -298,7 +298,7 @@ static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find(
 			break;
 		}
 		itr += hdr->bLength;
-		itr_size -= hdr->bDescriptorType;
+		itr_size -= hdr->bLength;
 	}
 out:
 	return epcd;
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 3cd96e936d77..c8e2a47d62a7 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -167,6 +167,8 @@ struct wa_xfer {
 
 static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer,
 	struct wa_seg *seg, int curr_iso_frame);
+static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
+		int starting_index, enum wa_seg_status status);
 
 static inline void wa_xfer_init(struct wa_xfer *xfer)
 {
@@ -367,13 +369,13 @@ static unsigned __wa_xfer_is_done(struct wa_xfer *xfer)
 			break;
 		case WA_SEG_ERROR:
 			xfer->result = seg->result;
-			dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zu(0x%08zX)\n",
+			dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n",
 				xfer, wa_xfer_id(xfer), seg->index, seg->result,
 				seg->result);
 			goto out;
 		case WA_SEG_ABORTED:
 			xfer->result = seg->result;
-			dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zu(0x%08zX)\n",
+			dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n",
 				xfer, wa_xfer_id(xfer), seg->index, seg->result,
 				seg->result);
 			goto out;
@@ -390,6 +392,24 @@ out:
 }
 
 /*
+ * Mark the given segment as done.  Return true if this completes the xfer.
+ * This should only be called for segs that have been submitted to an RPIPE.
+ * Delayed segs are not marked as submitted so they do not need to be marked
+ * as done when cleaning up.
+ *
+ * xfer->lock has to be locked
+ */
+static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer,
+	struct wa_seg *seg, enum wa_seg_status status)
+{
+	seg->status = status;
+	xfer->segs_done++;
+
+	/* check for done. */
+	return __wa_xfer_is_done(xfer);
+}
+
+/*
  * Search for a transfer list ID on the HCD's URB list
  *
  * For 32 bit architectures, we use the pointer itself; for 64 bits, a
@@ -416,12 +436,51 @@ out:
 
 struct wa_xfer_abort_buffer {
 	struct urb urb;
+	struct wahc *wa;
 	struct wa_xfer_abort cmd;
 };
 
 static void __wa_xfer_abort_cb(struct urb *urb)
 {
 	struct wa_xfer_abort_buffer *b = urb->context;
+	struct wahc *wa = b->wa;
+
+	/*
+	 * If the abort request URB failed, then the HWA did not get the abort
+	 * command.  Forcibly clean up the xfer without waiting for a Transfer
+	 * Result from the HWA.
+	 */
+	if (urb->status < 0) {
+		struct wa_xfer *xfer;
+		struct device *dev = &wa->usb_iface->dev;
+
+		xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID));
+		dev_err(dev, "%s: Transfer Abort request failed. result: %d\n",
+			__func__, urb->status);
+		if (xfer) {
+			unsigned long flags;
+			int done;
+			struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+			dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n",
+				__func__, xfer, wa_xfer_id(xfer));
+			spin_lock_irqsave(&xfer->lock, flags);
+			/* mark all segs as aborted. */
+			wa_complete_remaining_xfer_segs(xfer, 0,
+				WA_SEG_ABORTED);
+			done = __wa_xfer_is_done(xfer);
+			spin_unlock_irqrestore(&xfer->lock, flags);
+			if (done)
+				wa_xfer_completion(xfer);
+			wa_xfer_delayed_run(rpipe);
+			wa_xfer_put(xfer);
+		} else {
+			dev_err(dev, "%s: xfer ID 0x%08X already gone.\n",
+				 __func__, le32_to_cpu(b->cmd.dwTransferID));
+		}
+	}
+
+	wa_put(wa);	/* taken in __wa_xfer_abort */
 	usb_put_urb(&b->urb);
 }
 
@@ -449,6 +508,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer)
 	b->cmd.bRequestType = WA_XFER_ABORT;
 	b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
 	b->cmd.dwTransferID = wa_xfer_id_le32(xfer);
+	b->wa = wa_get(xfer->wa);
 
 	usb_init_urb(&b->urb);
 	usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
@@ -462,6 +522,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer)
 
 
 error_submit:
+	wa_put(xfer->wa);
 	if (printk_ratelimit())
 		dev_err(dev, "xfer %p: Can't submit abort request: %d\n",
 			xfer, result);
@@ -733,6 +794,8 @@ static void wa_seg_dto_cb(struct urb *urb)
 				seg->isoc_frame_offset + seg->isoc_frame_index);
 
 			/* resubmit the URB with the next isoc frame. */
+			/* take a ref on resubmit. */
+			wa_xfer_get(xfer);
 			result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
 			if (result < 0) {
 				dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n",
@@ -760,9 +823,13 @@ static void wa_seg_dto_cb(struct urb *urb)
 		goto error_default;
 	}
 
+	/* taken when this URB was submitted. */
+	wa_xfer_put(xfer);
 	return;
 
 error_dto_submit:
+	/* taken on resubmit attempt. */
+	wa_xfer_put(xfer);
 error_default:
 	spin_lock_irqsave(&xfer->lock, flags);
 	rpipe = xfer->ep->hcpriv;
@@ -772,12 +839,10 @@ error_default:
 		wa_reset_all(wa);
 	}
 	if (seg->status != WA_SEG_ERROR) {
-		seg->status = WA_SEG_ERROR;
 		seg->result = urb->status;
-		xfer->segs_done++;
 		__wa_xfer_abort(xfer);
 		rpipe_ready = rpipe_avail_inc(rpipe);
-		done = __wa_xfer_is_done(xfer);
+		done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR);
 	}
 	spin_unlock_irqrestore(&xfer->lock, flags);
 	if (holding_dto) {
@@ -788,7 +853,8 @@ error_default:
 		wa_xfer_completion(xfer);
 	if (rpipe_ready)
 		wa_xfer_delayed_run(rpipe);
-
+	/* taken when this URB was submitted. */
+	wa_xfer_put(xfer);
 }
 
 /*
@@ -842,12 +908,11 @@ static void wa_seg_iso_pack_desc_cb(struct urb *urb)
 		}
 		if (seg->status != WA_SEG_ERROR) {
 			usb_unlink_urb(seg->dto_urb);
-			seg->status = WA_SEG_ERROR;
 			seg->result = urb->status;
-			xfer->segs_done++;
 			__wa_xfer_abort(xfer);
 			rpipe_ready = rpipe_avail_inc(rpipe);
-			done = __wa_xfer_is_done(xfer);
+			done = __wa_xfer_mark_seg_as_done(xfer, seg,
+					WA_SEG_ERROR);
 		}
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		if (done)
@@ -855,6 +920,8 @@ static void wa_seg_iso_pack_desc_cb(struct urb *urb)
 		if (rpipe_ready)
 			wa_xfer_delayed_run(rpipe);
 	}
+	/* taken when this URB was submitted. */
+	wa_xfer_put(xfer);
 }
 
 /*
@@ -919,18 +986,18 @@ static void wa_seg_tr_cb(struct urb *urb)
 		}
 		usb_unlink_urb(seg->isoc_pack_desc_urb);
 		usb_unlink_urb(seg->dto_urb);
-		seg->status = WA_SEG_ERROR;
 		seg->result = urb->status;
-		xfer->segs_done++;
 		__wa_xfer_abort(xfer);
 		rpipe_ready = rpipe_avail_inc(rpipe);
-		done = __wa_xfer_is_done(xfer);
+		done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR);
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		if (done)
 			wa_xfer_completion(xfer);
 		if (rpipe_ready)
 			wa_xfer_delayed_run(rpipe);
 	}
+	/* taken when this URB was submitted. */
+	wa_xfer_put(xfer);
 }
 
 /*
@@ -940,7 +1007,7 @@ static void wa_seg_tr_cb(struct urb *urb)
  */
 static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg,
 	const unsigned int bytes_transferred,
-	const unsigned int bytes_to_transfer, unsigned int *out_num_sgs)
+	const unsigned int bytes_to_transfer, int *out_num_sgs)
 {
 	struct scatterlist *out_sg;
 	unsigned int bytes_processed = 0, offset_into_current_page_data = 0,
@@ -1094,14 +1161,13 @@ static int __wa_populate_dto_urb(struct wa_xfer *xfer,
  */
 static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
 {
-	int result, cnt, iso_frame_offset;
+	int result, cnt, isoc_frame_offset = 0;
 	size_t alloc_size = sizeof(*xfer->seg[0])
 		- sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size;
 	struct usb_device *usb_dev = xfer->wa->usb_dev;
 	const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd;
 	struct wa_seg *seg;
 	size_t buf_itr, buf_size, buf_itr_size;
-	int isoc_frame_offset = 0;
 
 	result = -ENOMEM;
 	xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC);
@@ -1109,7 +1175,6 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
 		goto error_segs_kzalloc;
 	buf_itr = 0;
 	buf_size = xfer->urb->transfer_buffer_length;
-	iso_frame_offset = 0;
 	for (cnt = 0; cnt < xfer->segs; cnt++) {
 		size_t iso_pkt_descr_size = 0;
 		int seg_isoc_frame_count = 0, seg_isoc_size = 0;
@@ -1318,30 +1383,41 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
 	/* default to done unless we encounter a multi-frame isoc segment. */
 	*dto_done = 1;
 
+	/*
+	 * Take a ref for each segment urb so the xfer cannot disappear until
+	 * all of the callbacks run.
+	 */
+	wa_xfer_get(xfer);
 	/* submit the transfer request. */
+	seg->status = WA_SEG_SUBMITTED;
 	result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC);
 	if (result < 0) {
 		pr_err("%s: xfer %p#%u: REQ submit failed: %d\n",
 		       __func__, xfer, seg->index, result);
-		goto error_seg_submit;
+		wa_xfer_put(xfer);
+		goto error_tr_submit;
 	}
 	/* submit the isoc packet descriptor if present. */
 	if (seg->isoc_pack_desc_urb) {
+		wa_xfer_get(xfer);
 		result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC);
 		seg->isoc_frame_index = 0;
 		if (result < 0) {
 			pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n",
 			       __func__, xfer, seg->index, result);
+			wa_xfer_put(xfer);
 			goto error_iso_pack_desc_submit;
 		}
 	}
 	/* submit the out data if this is an out request. */
 	if (seg->dto_urb) {
 		struct wahc *wa = xfer->wa;
+		wa_xfer_get(xfer);
 		result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
 		if (result < 0) {
 			pr_err("%s: xfer %p#%u: DTO submit failed: %d\n",
 			       __func__, xfer, seg->index, result);
+			wa_xfer_put(xfer);
 			goto error_dto_submit;
 		}
 		/*
@@ -1353,7 +1429,6 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
 			&& (seg->isoc_frame_count > 1))
 			*dto_done = 0;
 	}
-	seg->status = WA_SEG_SUBMITTED;
 	rpipe_avail_dec(rpipe);
 	return 0;
 
@@ -1361,7 +1436,7 @@ error_dto_submit:
 	usb_unlink_urb(seg->isoc_pack_desc_urb);
 error_iso_pack_desc_submit:
 	usb_unlink_urb(&seg->tr_urb);
-error_seg_submit:
+error_tr_submit:
 	seg->status = WA_SEG_ERROR;
 	seg->result = result;
 	*dto_done = 1;
@@ -1393,6 +1468,12 @@ static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting)
 				 list_node);
 		list_del(&seg->list_node);
 		xfer = seg->xfer;
+		/*
+		 * Get a reference to the xfer in case the callbacks for the
+		 * URBs submitted by __wa_seg_submit attempt to complete
+		 * the xfer before this function completes.
+		 */
+		wa_xfer_get(xfer);
 		result = __wa_seg_submit(rpipe, xfer, seg, &dto_done);
 		/* release the dto resource if this RPIPE is done with it. */
 		if (dto_done)
@@ -1401,13 +1482,23 @@ static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting)
 			xfer, wa_xfer_id(xfer), seg->index,
 			atomic_read(&rpipe->segs_available), result);
 		if (unlikely(result < 0)) {
+			int done;
+
 			spin_unlock_irqrestore(&rpipe->seg_lock, flags);
 			spin_lock_irqsave(&xfer->lock, flags);
 			__wa_xfer_abort(xfer);
+			/*
+			 * This seg was marked as submitted when it was put on
+			 * the RPIPE seg_list.  Mark it done.
+			 */
 			xfer->segs_done++;
+			done = __wa_xfer_is_done(xfer);
 			spin_unlock_irqrestore(&xfer->lock, flags);
+			if (done)
+				wa_xfer_completion(xfer);
 			spin_lock_irqsave(&rpipe->seg_lock, flags);
 		}
+		wa_xfer_put(xfer);
 	}
 	/*
 	 * Mark this RPIPE as waiting if dto was not acquired, there are
@@ -1592,12 +1683,19 @@ static int wa_urb_enqueue_b(struct wa_xfer *xfer)
 		dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__);
 		goto error_xfer_setup;
 	}
+	/*
+	 * Get a xfer reference since __wa_xfer_submit starts asynchronous
+	 * operations that may try to complete the xfer before this function
+	 * exits.
+	 */
+	wa_xfer_get(xfer);
 	result = __wa_xfer_submit(xfer);
 	if (result < 0) {
 		dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__);
 		goto error_xfer_submit;
 	}
 	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_put(xfer);
 	return 0;
 
 	/*
@@ -1623,6 +1721,7 @@ error_xfer_submit:
 	spin_unlock_irqrestore(&xfer->lock, flags);
 	if (done)
 		wa_xfer_completion(xfer);
+	wa_xfer_put(xfer);
 	/* return success since the completion routine will run. */
 	return 0;
 }
@@ -1832,20 +1931,20 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 	/* check if it is safe to unlink. */
 	spin_lock_irqsave(&wa->xfer_list_lock, flags);
 	result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status);
+	if ((result == 0) && urb->hcpriv) {
+		/*
+		 * Get a xfer ref to prevent a race with wa_xfer_giveback
+		 * cleaning up the xfer while we are working with it.
+		 */
+		wa_xfer_get(urb->hcpriv);
+	}
 	spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
 	if (result)
 		return result;
 
 	xfer = urb->hcpriv;
-	if (xfer == NULL) {
-		/*
-		 * Nothing setup yet enqueue will see urb->status !=
-		 * -EINPROGRESS (by hcd layer) and bail out with
-		 * error, no need to do completion
-		 */
-		BUG_ON(urb->status == -EINPROGRESS);
-		goto out;
-	}
+	if (xfer == NULL)
+		return -ENOENT;
 	spin_lock_irqsave(&xfer->lock, flags);
 	pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer));
 	rpipe = xfer->ep->hcpriv;
@@ -1856,6 +1955,16 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 		result = -ENOENT;
 		goto out_unlock;
 	}
+	/*
+	 * Check for done to avoid racing with wa_xfer_giveback and completing
+	 * twice.
+	 */
+	if (__wa_xfer_is_done(xfer)) {
+		pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__,
+			xfer, wa_xfer_id(xfer));
+		result = -ENOENT;
+		goto out_unlock;
+	}
 	/* Check the delayed list -> if there, release and complete */
 	spin_lock_irqsave(&wa->xfer_list_lock, flags2);
 	if (!list_empty(&xfer->list_node) && xfer->seg == NULL)
@@ -1865,6 +1974,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 		goto out_unlock;	/* setup(), enqueue_b() completes */
 	/* Ok, the xfer is in flight already, it's been setup and submitted.*/
 	xfer_abort_pending = __wa_xfer_abort(xfer) >= 0;
+	/*
+	 * grab the rpipe->seg_lock here to prevent racing with
+	 * __wa_xfer_delayed_run.
+	 */
+	spin_lock(&rpipe->seg_lock);
 	for (cnt = 0; cnt < xfer->segs; cnt++) {
 		seg = xfer->seg[cnt];
 		pr_debug("%s: xfer id 0x%08X#%d status = %d\n",
@@ -1885,16 +1999,24 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 			 */
 			seg->status = WA_SEG_ABORTED;
 			seg->result = -ENOENT;
-			spin_lock_irqsave(&rpipe->seg_lock, flags2);
 			list_del(&seg->list_node);
 			xfer->segs_done++;
-			spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
 			break;
 		case WA_SEG_DONE:
 		case WA_SEG_ERROR:
 		case WA_SEG_ABORTED:
 			break;
 			/*
+			 * The buf_in data for a segment in the
+			 * WA_SEG_DTI_PENDING state is actively being read.
+			 * Let wa_buf_in_cb handle it since it will be called
+			 * and will increment xfer->segs_done.  Cleaning up
+			 * here could cause wa_buf_in_cb to access the xfer
+			 * after it has been completed/freed.
+			 */
+		case WA_SEG_DTI_PENDING:
+			break;
+			/*
 			 * In the states below, the HWA device already knows
 			 * about the transfer.  If an abort request was sent,
 			 * allow the HWA to process it and wait for the
@@ -1903,7 +2025,6 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 			 */
 		case WA_SEG_SUBMITTED:
 		case WA_SEG_PENDING:
-		case WA_SEG_DTI_PENDING:
 			/*
 			 * Check if the abort was successfully sent.  This could
 			 * be false if the HWA has been removed but we haven't
@@ -1917,6 +2038,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 			break;
 		}
 	}
+	spin_unlock(&rpipe->seg_lock);
 	xfer->result = urb->status;	/* -ENOENT or -ECONNRESET */
 	done = __wa_xfer_is_done(xfer);
 	spin_unlock_irqrestore(&xfer->lock, flags);
@@ -1924,11 +2046,12 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status)
 		wa_xfer_completion(xfer);
 	if (rpipe_ready)
 		wa_xfer_delayed_run(rpipe);
+	wa_xfer_put(xfer);
 	return result;
 
 out_unlock:
 	spin_unlock_irqrestore(&xfer->lock, flags);
-out:
+	wa_xfer_put(xfer);
 	return result;
 
 dequeue_delayed:
@@ -1937,6 +2060,7 @@ dequeue_delayed:
 	xfer->result = urb->status;
 	spin_unlock_irqrestore(&xfer->lock, flags);
 	wa_xfer_giveback(xfer);
+	wa_xfer_put(xfer);
 	usb_put_urb(urb);		/* we got a ref in enqueue() */
 	return 0;
 }
@@ -1996,15 +2120,17 @@ static int wa_xfer_status_to_errno(u8 status)
  * no other segment transfer results will be returned from the device.
  * Mark the remaining submitted or pending xfers as completed so that
  * the xfer will complete cleanly.
+ *
+ * xfer->lock must be held
+ *
  */
 static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
-		struct wa_seg *incoming_seg, enum wa_seg_status status)
+		int starting_index, enum wa_seg_status status)
 {
 	int index;
 	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
 
-	for (index = incoming_seg->index + 1; index < xfer->segs_submitted;
-		index++) {
+	for (index = starting_index; index < xfer->segs_submitted; index++) {
 		struct wa_seg *current_seg = xfer->seg[index];
 
 		BUG_ON(current_seg == NULL);
@@ -2033,73 +2159,110 @@ static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
 	}
 }
 
-/* Populate the wa->buf_in_urb based on the current isoc transfer state. */
-static void __wa_populate_buf_in_urb_isoc(struct wahc *wa, struct wa_xfer *xfer,
-	struct wa_seg *seg, int curr_iso_frame)
+/* Populate the given urb based on the current isoc transfer state. */
+static int __wa_populate_buf_in_urb_isoc(struct wahc *wa,
+	struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg)
 {
-	BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
+	int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset;
+	int seg_index, total_len = 0, urb_frame_index = urb_start_frame;
+	struct usb_iso_packet_descriptor *iso_frame_desc =
+						xfer->urb->iso_frame_desc;
+	const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd);
+	int next_frame_contiguous;
+	struct usb_iso_packet_descriptor *iso_frame;
+
+	BUG_ON(buf_in_urb->status == -EINPROGRESS);
+
+	/*
+	 * If the current frame actual_length is contiguous with the next frame
+	 * and actual_length is a multiple of the DTI endpoint max packet size,
+	 * combine the current frame with the next frame in a single URB.  This
+	 * reduces the number of URBs that must be submitted in that case.
+	 */
+	seg_index = seg->isoc_frame_index;
+	do {
+		next_frame_contiguous = 0;
+
+		iso_frame = &iso_frame_desc[urb_frame_index];
+		total_len += iso_frame->actual_length;
+		++urb_frame_index;
+		++seg_index;
+
+		if (seg_index < seg->isoc_frame_count) {
+			struct usb_iso_packet_descriptor *next_iso_frame;
+
+			next_iso_frame = &iso_frame_desc[urb_frame_index];
+
+			if ((iso_frame->offset + iso_frame->actual_length) ==
+				next_iso_frame->offset)
+				next_frame_contiguous = 1;
+		}
+	} while (next_frame_contiguous
+			&& ((iso_frame->actual_length % dti_packet_size) == 0));
 
 	/* this should always be 0 before a resubmit. */
-	wa->buf_in_urb->num_mapped_sgs	= 0;
-	wa->buf_in_urb->transfer_dma = xfer->urb->transfer_dma +
-		xfer->urb->iso_frame_desc[curr_iso_frame].offset;
-	wa->buf_in_urb->transfer_buffer_length =
-		xfer->urb->iso_frame_desc[curr_iso_frame].length;
-	wa->buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	wa->buf_in_urb->transfer_buffer = NULL;
-	wa->buf_in_urb->sg = NULL;
-	wa->buf_in_urb->num_sgs = 0;
-	wa->buf_in_urb->context = seg;
+	buf_in_urb->num_mapped_sgs	= 0;
+	buf_in_urb->transfer_dma = xfer->urb->transfer_dma +
+		iso_frame_desc[urb_start_frame].offset;
+	buf_in_urb->transfer_buffer_length = total_len;
+	buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	buf_in_urb->transfer_buffer = NULL;
+	buf_in_urb->sg = NULL;
+	buf_in_urb->num_sgs = 0;
+	buf_in_urb->context = seg;
+
+	/* return the number of frames included in this URB. */
+	return seg_index - seg->isoc_frame_index;
 }
 
-/* Populate the wa->buf_in_urb based on the current transfer state. */
-static int wa_populate_buf_in_urb(struct wahc *wa, struct wa_xfer *xfer,
+/* Populate the given urb based on the current transfer state. */
+static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer,
 	unsigned int seg_idx, unsigned int bytes_transferred)
 {
 	int result = 0;
 	struct wa_seg *seg = xfer->seg[seg_idx];
 
-	BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
+	BUG_ON(buf_in_urb->status == -EINPROGRESS);
 	/* this should always be 0 before a resubmit. */
-	wa->buf_in_urb->num_mapped_sgs	= 0;
+	buf_in_urb->num_mapped_sgs	= 0;
 
 	if (xfer->is_dma) {
-		wa->buf_in_urb->transfer_dma = xfer->urb->transfer_dma
+		buf_in_urb->transfer_dma = xfer->urb->transfer_dma
 			+ (seg_idx * xfer->seg_size);
-		wa->buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-		wa->buf_in_urb->transfer_buffer = NULL;
-		wa->buf_in_urb->sg = NULL;
-		wa->buf_in_urb->num_sgs = 0;
+		buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		buf_in_urb->transfer_buffer = NULL;
+		buf_in_urb->sg = NULL;
+		buf_in_urb->num_sgs = 0;
 	} else {
 		/* do buffer or SG processing. */
-		wa->buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
+		buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
 
 		if (xfer->urb->transfer_buffer) {
-			wa->buf_in_urb->transfer_buffer =
+			buf_in_urb->transfer_buffer =
 				xfer->urb->transfer_buffer
 				+ (seg_idx * xfer->seg_size);
-			wa->buf_in_urb->sg = NULL;
-			wa->buf_in_urb->num_sgs = 0;
+			buf_in_urb->sg = NULL;
+			buf_in_urb->num_sgs = 0;
 		} else {
 			/* allocate an SG list to store seg_size bytes
 				and copy the subset of the xfer->urb->sg
 				that matches the buffer subset we are
 				about to read. */
-			wa->buf_in_urb->sg = wa_xfer_create_subset_sg(
+			buf_in_urb->sg = wa_xfer_create_subset_sg(
 				xfer->urb->sg,
 				seg_idx * xfer->seg_size,
 				bytes_transferred,
-				&(wa->buf_in_urb->num_sgs));
+				&(buf_in_urb->num_sgs));
 
-			if (!(wa->buf_in_urb->sg)) {
-				wa->buf_in_urb->num_sgs	= 0;
+			if (!(buf_in_urb->sg)) {
+				buf_in_urb->num_sgs	= 0;
 				result = -ENOMEM;
 			}
-			wa->buf_in_urb->transfer_buffer = NULL;
+			buf_in_urb->transfer_buffer = NULL;
 		}
 	}
-	wa->buf_in_urb->transfer_buffer_length = bytes_transferred;
-	wa->buf_in_urb->context = seg;
+	buf_in_urb->transfer_buffer_length = bytes_transferred;
+	buf_in_urb->context = seg;
 
 	return result;
 }
@@ -2124,6 +2287,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
 	u8 usb_status;
 	unsigned rpipe_ready = 0;
 	unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength);
+	struct urb *buf_in_urb = &(wa->buf_in_urbs[0]);
 
 	spin_lock_irqsave(&xfer->lock, flags);
 	seg_idx = xfer_result->bTransferSegment & 0x7f;
@@ -2147,7 +2311,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
 	}
 	if (usb_status & 0x80) {
 		seg->result = wa_xfer_status_to_errno(usb_status);
-		dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n",
+		dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n",
 			xfer, xfer->id, seg->index, usb_status);
 		seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ?
 			WA_SEG_ABORTED : WA_SEG_ERROR;
@@ -2162,7 +2326,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
 	 * transfers with data or below for no data, the xfer will complete.
 	 */
 	if (xfer_result->bTransferSegment & 0x80)
-		wa_complete_remaining_xfer_segs(xfer, seg, WA_SEG_DONE);
+		wa_complete_remaining_xfer_segs(xfer, seg->index + 1,
+			WA_SEG_DONE);
 	if (usb_pipeisoc(xfer->urb->pipe)
 		&& (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) {
 		/* set up WA state to read the isoc packet status next. */
@@ -2173,20 +2338,21 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer,
 			&& (bytes_transferred > 0)) {
 		/* IN data phase: read to buffer */
 		seg->status = WA_SEG_DTI_PENDING;
-		result = wa_populate_buf_in_urb(wa, xfer, seg_idx,
+		result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx,
 			bytes_transferred);
 		if (result < 0)
 			goto error_buf_in_populate;
-		result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC);
-		if (result < 0)
+		++(wa->active_buf_in_urbs);
+		result = usb_submit_urb(buf_in_urb, GFP_ATOMIC);
+		if (result < 0) {
+			--(wa->active_buf_in_urbs);
 			goto error_submit_buf_in;
+		}
 	} else {
 		/* OUT data phase or no data, complete it -- */
-		seg->status = WA_SEG_DONE;
 		seg->result = bytes_transferred;
-		xfer->segs_done++;
 		rpipe_ready = rpipe_avail_inc(rpipe);
-		done = __wa_xfer_is_done(xfer);
+		done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE);
 	}
 	spin_unlock_irqrestore(&xfer->lock, flags);
 	if (done)
@@ -2205,15 +2371,15 @@ error_submit_buf_in:
 		dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n",
 			xfer, seg_idx, result);
 	seg->result = result;
-	kfree(wa->buf_in_urb->sg);
-	wa->buf_in_urb->sg = NULL;
+	kfree(buf_in_urb->sg);
+	buf_in_urb->sg = NULL;
 error_buf_in_populate:
 	__wa_xfer_abort(xfer);
 	seg->status = WA_SEG_ERROR;
 error_complete:
 	xfer->segs_done++;
 	rpipe_ready = rpipe_avail_inc(rpipe);
-	wa_complete_remaining_xfer_segs(xfer, seg, seg->status);
+	wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status);
 	done = __wa_xfer_is_done(xfer);
 	/*
 	 * queue work item to clear STALL for control endpoints.
@@ -2315,16 +2481,16 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
 	for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) {
 		struct usb_iso_packet_descriptor *iso_frame_desc =
 			xfer->urb->iso_frame_desc;
-		const int urb_frame_index =
+		const int xfer_frame_index =
 			seg->isoc_frame_offset + seg_index;
 
-		iso_frame_desc[urb_frame_index].status =
+		iso_frame_desc[xfer_frame_index].status =
 			wa_xfer_status_to_errno(
 			le16_to_cpu(status_array[seg_index].PacketStatus));
-		iso_frame_desc[urb_frame_index].actual_length =
+		iso_frame_desc[xfer_frame_index].actual_length =
 			le16_to_cpu(status_array[seg_index].PacketLength);
 		/* track the number of frames successfully transferred. */
-		if (iso_frame_desc[urb_frame_index].actual_length > 0) {
+		if (iso_frame_desc[xfer_frame_index].actual_length > 0) {
 			/* save the starting frame index for buf_in_urb. */
 			if (!data_frame_count)
 				first_frame_index = seg_index;
@@ -2333,30 +2499,64 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb)
 	}
 
 	if (xfer->is_inbound && data_frame_count) {
-		int result;
+		int result, total_frames_read = 0, urb_index = 0;
+		struct urb *buf_in_urb;
 
+		/* IN data phase: read to buffer */
+		seg->status = WA_SEG_DTI_PENDING;
+
+		/* start with the first frame with data. */
 		seg->isoc_frame_index = first_frame_index;
-		/* submit a read URB for the first frame with data. */
-		__wa_populate_buf_in_urb_isoc(wa, xfer, seg,
-			seg->isoc_frame_index + seg->isoc_frame_offset);
+		/* submit up to WA_MAX_BUF_IN_URBS read URBs. */
+		do {
+			int urb_frame_index, urb_frame_count;
+			struct usb_iso_packet_descriptor *iso_frame_desc;
+
+			buf_in_urb = &(wa->buf_in_urbs[urb_index]);
+			urb_frame_count = __wa_populate_buf_in_urb_isoc(wa,
+				buf_in_urb, xfer, seg);
+			/* advance frame index to start of next read URB. */
+			seg->isoc_frame_index += urb_frame_count;
+			total_frames_read += urb_frame_count;
+
+			++(wa->active_buf_in_urbs);
+			result = usb_submit_urb(buf_in_urb, GFP_ATOMIC);
+
+			/* skip 0-byte frames. */
+			urb_frame_index =
+				seg->isoc_frame_offset + seg->isoc_frame_index;
+			iso_frame_desc =
+				&(xfer->urb->iso_frame_desc[urb_frame_index]);
+			while ((seg->isoc_frame_index <
+						seg->isoc_frame_count) &&
+				 (iso_frame_desc->actual_length == 0)) {
+				++(seg->isoc_frame_index);
+				++iso_frame_desc;
+			}
+			++urb_index;
+
+		} while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS)
+				&& (seg->isoc_frame_index <
+						seg->isoc_frame_count));
 
-		result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC);
 		if (result < 0) {
+			--(wa->active_buf_in_urbs);
 			dev_err(dev, "DTI Error: Could not submit buf in URB (%d)",
 				result);
 			wa_reset_all(wa);
-		} else if (data_frame_count > 1)
-			/* If we need to read multiple frames, set DTI busy. */
+		} else if (data_frame_count > total_frames_read)
+			/* If we need to read more frames, set DTI busy. */
 			dti_busy = 1;
 	} else {
 		/* OUT transfer or no more IN data, complete it -- */
-		seg->status = WA_SEG_DONE;
-		xfer->segs_done++;
 		rpipe_ready = rpipe_avail_inc(rpipe);
-		done = __wa_xfer_is_done(xfer);
+		done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE);
 	}
 	spin_unlock_irqrestore(&xfer->lock, flags);
-	wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
+	if (dti_busy)
+		wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING;
+	else
+		wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
 	if (done)
 		wa_xfer_completion(xfer);
 	if (rpipe_ready)
@@ -2388,8 +2588,9 @@ static void wa_buf_in_cb(struct urb *urb)
 	struct wahc *wa;
 	struct device *dev;
 	struct wa_rpipe *rpipe;
-	unsigned rpipe_ready = 0, seg_index, isoc_data_frame_count = 0;
+	unsigned rpipe_ready = 0, isoc_data_frame_count = 0;
 	unsigned long flags;
+	int resubmit_dti = 0, active_buf_in_urbs;
 	u8 done = 0;
 
 	/* free the sg if it was used. */
@@ -2399,19 +2600,20 @@ static void wa_buf_in_cb(struct urb *urb)
 	spin_lock_irqsave(&xfer->lock, flags);
 	wa = xfer->wa;
 	dev = &wa->usb_iface->dev;
+	--(wa->active_buf_in_urbs);
+	active_buf_in_urbs = wa->active_buf_in_urbs;
 
 	if (usb_pipeisoc(xfer->urb->pipe)) {
+		struct usb_iso_packet_descriptor *iso_frame_desc =
+			xfer->urb->iso_frame_desc;
+		int	seg_index;
+
 		/*
-		 * Find the next isoc frame with data.  Bail out after
-		 * isoc_data_frame_count > 1 since there is no need to walk
-		 * the entire frame array.  We just need to know if
-		 * isoc_data_frame_count is 0, 1, or >1.
+		 * Find the next isoc frame with data and count how many
+		 * frames with data remain.
 		 */
-		seg_index = seg->isoc_frame_index + 1;
-		while ((seg_index < seg->isoc_frame_count)
-			&& (isoc_data_frame_count <= 1)) {
-			struct usb_iso_packet_descriptor *iso_frame_desc =
-				xfer->urb->iso_frame_desc;
+		seg_index = seg->isoc_frame_index;
+		while (seg_index < seg->isoc_frame_count) {
 			const int urb_frame_index =
 				seg->isoc_frame_offset + seg_index;
 
@@ -2432,24 +2634,39 @@ static void wa_buf_in_cb(struct urb *urb)
 
 		seg->result += urb->actual_length;
 		if (isoc_data_frame_count > 0) {
-			int result;
-			/* submit a read URB for the first frame with data. */
-			__wa_populate_buf_in_urb_isoc(wa, xfer, seg,
-				seg->isoc_frame_index + seg->isoc_frame_offset);
-			result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC);
+			int result, urb_frame_count;
+
+			/* submit a read URB for the next frame with data. */
+			urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb,
+				 xfer, seg);
+			/* advance index to start of next read URB. */
+			seg->isoc_frame_index += urb_frame_count;
+			++(wa->active_buf_in_urbs);
+			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result < 0) {
+				--(wa->active_buf_in_urbs);
 				dev_err(dev, "DTI Error: Could not submit buf in URB (%d)",
 					result);
 				wa_reset_all(wa);
 			}
-		} else {
+			/*
+			 * If we are in this callback and
+			 * isoc_data_frame_count > 0, it means that the dti_urb
+			 * submission was delayed in wa_dti_cb.  Once
+			 * we submit the last buf_in_urb, we can submit the
+			 * delayed dti_urb.
+			 */
+			  resubmit_dti = (isoc_data_frame_count ==
+							urb_frame_count);
+		} else if (active_buf_in_urbs == 0) {
 			rpipe = xfer->ep->hcpriv;
-			seg->status = WA_SEG_DONE;
-			dev_dbg(dev, "xfer %p#%u: data in done (%zu bytes)\n",
-				xfer, seg->index, seg->result);
-			xfer->segs_done++;
+			dev_dbg(dev,
+				"xfer %p 0x%08X#%u: data in done (%zu bytes)\n",
+				xfer, wa_xfer_id(xfer), seg->index,
+				seg->result);
 			rpipe_ready = rpipe_avail_inc(rpipe);
-			done = __wa_xfer_is_done(xfer);
+			done = __wa_xfer_mark_seg_as_done(xfer, seg,
+					WA_SEG_DONE);
 		}
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		if (done)
@@ -2461,37 +2678,44 @@ static void wa_buf_in_cb(struct urb *urb)
 	case -ENOENT:		/* as it was done by the who unlinked us */
 		break;
 	default:		/* Other errors ... */
+		/*
+		 * Error on data buf read.  Only resubmit DTI if it hasn't
+		 * already been done by previously hitting this error or by a
+		 * successful completion of the previous buf_in_urb.
+		 */
+		resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING;
 		spin_lock_irqsave(&xfer->lock, flags);
 		rpipe = xfer->ep->hcpriv;
 		if (printk_ratelimit())
-			dev_err(dev, "xfer %p#%u: data in error %d\n",
-				xfer, seg->index, urb->status);
+			dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n",
+				xfer, wa_xfer_id(xfer), seg->index,
+				urb->status);
 		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
 			    EDC_ERROR_TIMEFRAME)){
 			dev_err(dev, "DTO: URB max acceptable errors "
 				"exceeded, resetting device\n");
 			wa_reset_all(wa);
 		}
-		seg->status = WA_SEG_ERROR;
 		seg->result = urb->status;
-		xfer->segs_done++;
 		rpipe_ready = rpipe_avail_inc(rpipe);
-		__wa_xfer_abort(xfer);
-		done = __wa_xfer_is_done(xfer);
+		if (active_buf_in_urbs == 0)
+			done = __wa_xfer_mark_seg_as_done(xfer, seg,
+				WA_SEG_ERROR);
+		else
+			__wa_xfer_abort(xfer);
 		spin_unlock_irqrestore(&xfer->lock, flags);
 		if (done)
 			wa_xfer_completion(xfer);
 		if (rpipe_ready)
 			wa_xfer_delayed_run(rpipe);
 	}
-	/*
-	 * If we are in this callback and isoc_data_frame_count > 0, it means
-	 * that the dti_urb submission was delayed in wa_dti_cb.  Once
-	 * isoc_data_frame_count gets to 1, we can submit the deferred URB
-	 * since the last buf_in_urb was just submitted.
-	 */
-	if (isoc_data_frame_count == 1) {
-		int result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
+
+	if (resubmit_dti) {
+		int result;
+
+		wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING;
+
+		result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
 		if (result < 0) {
 			dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n",
 				result);
@@ -2561,11 +2785,15 @@ static void wa_dti_cb(struct urb *urb)
 					xfer_result->hdr.bNotifyType);
 				break;
 			}
+			xfer_id = le32_to_cpu(xfer_result->dwTransferID);
 			usb_status = xfer_result->bTransferStatus & 0x3f;
-			if (usb_status == WA_XFER_STATUS_NOT_FOUND)
+			if (usb_status == WA_XFER_STATUS_NOT_FOUND) {
 				/* taken care of already */
+				dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n",
+					__func__, xfer_id,
+					xfer_result->bTransferSegment & 0x7f);
 				break;
-			xfer_id = le32_to_cpu(xfer_result->dwTransferID);
+			}
 			xfer = wa_xfer_get_by_id(wa, xfer_id);
 			if (xfer == NULL) {
 				/* FIXME: transaction not found. */
@@ -2614,6 +2842,54 @@ out:
 }
 
 /*
+ * Initialize the DTI URB for reading transfer result notifications and also
+ * the buffer-in URB, for reading buffers. Then we just submit the DTI URB.
+ */
+int wa_dti_start(struct wahc *wa)
+{
+	const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
+	struct device *dev = &wa->usb_iface->dev;
+	int result = -ENOMEM, index;
+
+	if (wa->dti_urb != NULL)	/* DTI URB already started */
+		goto out;
+
+	wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->dti_urb == NULL) {
+		dev_err(dev, "Can't allocate DTI URB\n");
+		goto error_dti_urb_alloc;
+	}
+	usb_fill_bulk_urb(
+		wa->dti_urb, wa->usb_dev,
+		usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress),
+		wa->dti_buf, wa->dti_buf_size,
+		wa_dti_cb, wa);
+
+	/* init the buf in URBs */
+	for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) {
+		usb_fill_bulk_urb(
+			&(wa->buf_in_urbs[index]), wa->usb_dev,
+			usb_rcvbulkpipe(wa->usb_dev,
+				0x80 | dti_epd->bEndpointAddress),
+			NULL, 0, wa_buf_in_cb, wa);
+	}
+	result = usb_submit_urb(wa->dti_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n",
+			result);
+		goto error_dti_urb_submit;
+	}
+out:
+	return 0;
+
+error_dti_urb_submit:
+	usb_put_urb(wa->dti_urb);
+	wa->dti_urb = NULL;
+error_dti_urb_alloc:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wa_dti_start);
+/*
  * Transfer complete notification
  *
  * Called from the notif.c code. We get a notification on EP2 saying
@@ -2627,15 +2903,10 @@ out:
  * Follow up in wa_dti_cb(), as that's where the whole state
  * machine starts.
  *
- * So here we just initialize the DTI URB for reading transfer result
- * notifications and also the buffer-in URB, for reading buffers. Then
- * we just submit the DTI URB.
- *
  * @wa shall be referenced
  */
 void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr)
 {
-	int result;
 	struct device *dev = &wa->usb_iface->dev;
 	struct wa_notif_xfer *notif_xfer;
 	const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
@@ -2649,45 +2920,13 @@ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr)
 			notif_xfer->bEndpoint, dti_epd->bEndpointAddress);
 		goto error;
 	}
-	if (wa->dti_urb != NULL)	/* DTI URB already started */
-		goto out;
 
-	wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (wa->dti_urb == NULL) {
-		dev_err(dev, "Can't allocate DTI URB\n");
-		goto error_dti_urb_alloc;
-	}
-	usb_fill_bulk_urb(
-		wa->dti_urb, wa->usb_dev,
-		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
-		wa->dti_buf, wa->dti_buf_size,
-		wa_dti_cb, wa);
+	/* attempt to start the DTI ep processing. */
+	if (wa_dti_start(wa) < 0)
+		goto error;
 
-	wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (wa->buf_in_urb == NULL) {
-		dev_err(dev, "Can't allocate BUF-IN URB\n");
-		goto error_buf_in_urb_alloc;
-	}
-	usb_fill_bulk_urb(
-		wa->buf_in_urb, wa->usb_dev,
-		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
-		NULL, 0, wa_buf_in_cb, wa);
-	result = usb_submit_urb(wa->dti_urb, GFP_KERNEL);
-	if (result < 0) {
-		dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n",
-			result);
-		goto error_dti_urb_submit;
-	}
-out:
 	return;
 
-error_dti_urb_submit:
-	usb_put_urb(wa->buf_in_urb);
-	wa->buf_in_urb = NULL;
-error_buf_in_urb_alloc:
-	usb_put_urb(wa->dti_urb);
-	wa->dti_urb = NULL;
-error_dti_urb_alloc:
 error:
 	wa_reset_all(wa);
 }