Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...

6 files changed, 300 insertions, 21 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 791f11bed606..75823a1abeb6 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -48,6 +48,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_DAVINCI_DA8XX
 	default y if ARCH_CNS3XXX
 	default y if PLAT_SPEAR
+	default y if ARCH_EXYNOS
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a52769b5c904..4c0c9734251d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -380,6 +380,12 @@ config USB_OHCI_SH
 	  Enables support for the on-chip OHCI controller on the SuperH.
 	  If you use the PCI OHCI controller, this option is not necessary.
 
+config USB_OHCI_EXYNOS
+	boolean "OHCI support for Samsung EXYNOS SoC Series"
+	depends on USB_OHCI_HCD && ARCH_EXYNOS
+	help
+	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
+
 config USB_CNS3XXX_OHCI
 	bool "Cavium CNS3XXX OHCI Module"
 	depends on USB_OHCI_HCD && ARCH_CNS3XXX
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e33baf9052cb..bba9850f32f0 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -190,11 +191,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = omap_usbhs_enable(dev);
-	if (ret) {
-		dev_err(dev, "failed to start usbhs with err %d\n", ret);
-		goto err_enable;
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 
 	/*
 	 * An undocumented "feature" in the OMAP3 EHCI controller,
@@ -242,11 +240,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_hcd:
-	omap_usbhs_disable(dev);
-
-err_enable:
 	disable_put_regulator(pdata);
-	usb_put_hcd(hcd);
+	pm_runtime_put_sync(dev);
 
 err_io:
 	iounmap(regs);
@@ -268,10 +263,12 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 	struct usb_hcd *hcd	= dev_get_drvdata(dev);
 
 	usb_remove_hcd(hcd);
-	omap_usbhs_disable(dev);
 	disable_put_regulator(dev->platform_data);
 	iounmap(hcd->regs);
 	usb_put_hcd(hcd);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
new file mode 100644
index 000000000000..55aa35aa3d7b
--- /dev/null
+++ b/drivers/usb/host/ohci-exynos.c
@@ -0,0 +1,274 @@
+/*
+ * SAMSUNG EXYNOS USB HOST OHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <mach/ohci.h>
+#include <plat/usb-phy.h>
+
+struct exynos_ohci_hcd {
+	struct device *dev;
+	struct usb_hcd *hcd;
+	struct clk *clk;
+};
+
+static int ohci_exynos_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver exynos_ohci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "EXYNOS OHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+
+	.irq			= ohci_irq,
+	.flags			= HCD_MEMORY|HCD_USB11,
+
+	.start			= ohci_exynos_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+
+	.get_frame_number	= ohci_get_frame,
+
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int __devinit exynos_ohci_probe(struct platform_device *pdev)
+{
+	struct exynos4_ohci_platdata *pdata;
+	struct exynos_ohci_hcd *exynos_ohci;
+	struct usb_hcd *hcd;
+	struct ohci_hcd *ohci;
+	struct resource *res;
+	int irq;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data defined\n");
+		return -EINVAL;
+	}
+
+	exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL);
+	if (!exynos_ohci)
+		return -ENOMEM;
+
+	exynos_ohci->dev = &pdev->dev;
+
+	hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
+					dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		err = -ENOMEM;
+		goto fail_hcd;
+	}
+
+	exynos_ohci->hcd = hcd;
+	exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
+
+	if (IS_ERR(exynos_ohci->clk)) {
+		dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+		err = PTR_ERR(exynos_ohci->clk);
+		goto fail_clk;
+	}
+
+	err = clk_enable(exynos_ohci->clk);
+	if (err)
+		goto fail_clken;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get I/O memory\n");
+		err = -ENXIO;
+		goto fail_io;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = ioremap(res->start, resource_size(res));
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+		err = -ENOMEM;
+		goto fail_io;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "Failed to get IRQ\n");
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (pdata->phy_init)
+		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+	ohci = hcd_to_ohci(hcd);
+	ohci_hcd_init(ohci);
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to add USB HCD\n");
+		goto fail;
+	}
+
+	platform_set_drvdata(pdev, exynos_ohci);
+
+	return 0;
+
+fail:
+	iounmap(hcd->regs);
+fail_io:
+	clk_disable(exynos_ohci->clk);
+fail_clken:
+	clk_put(exynos_ohci->clk);
+fail_clk:
+	usb_put_hcd(hcd);
+fail_hcd:
+	kfree(exynos_ohci);
+	return err;
+}
+
+static int __devexit exynos_ohci_remove(struct platform_device *pdev)
+{
+	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = exynos_ohci->hcd;
+
+	usb_remove_hcd(hcd);
+
+	if (pdata && pdata->phy_exit)
+		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+
+	iounmap(hcd->regs);
+
+	clk_disable(exynos_ohci->clk);
+	clk_put(exynos_ohci->clk);
+
+	usb_put_hcd(hcd);
+	kfree(exynos_ohci);
+
+	return 0;
+}
+
+static void exynos_ohci_shutdown(struct platform_device *pdev)
+{
+	struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = exynos_ohci->hcd;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+#ifdef CONFIG_PM
+static int exynos_ohci_suspend(struct device *dev)
+{
+	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+	unsigned long flags;
+	int rc = 0;
+
+	/*
+	 * Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible, bail out if RH has been resumed. Use
+	 * the spinlock to properly synchronize with possible pending
+	 * RH suspend or resume activity.
+	 *
+	 * This is still racy as hcd->state is manipulated outside of
+	 * any locks =P But that will be a different fix.
+	 */
+	spin_lock_irqsave(&ohci->lock, flags);
+	if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) {
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	if (pdata && pdata->phy_exit)
+		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+fail:
+	spin_unlock_irqrestore(&ohci->lock, flags);
+
+	return rc;
+}
+
+static int exynos_ohci_resume(struct device *dev)
+{
+	struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = exynos_ohci->hcd;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+
+	if (pdata && pdata->phy_init)
+		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+	/* Mark hardware accessible again as we are out of D3 state by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	ohci_finish_controller_resume(hcd);
+
+	return 0;
+}
+#else
+#define exynos_ohci_suspend	NULL
+#define exynos_ohci_resume	NULL
+#endif
+
+static const struct dev_pm_ops exynos_ohci_pm_ops = {
+	.suspend	= exynos_ohci_suspend,
+	.resume		= exynos_ohci_resume,
+};
+
+static struct platform_driver exynos_ohci_driver = {
+	.probe		= exynos_ohci_probe,
+	.remove		= __devexit_p(exynos_ohci_remove),
+	.shutdown	= exynos_ohci_shutdown,
+	.driver = {
+		.name	= "exynos-ohci",
+		.owner	= THIS_MODULE,
+		.pm	= &exynos_ohci_pm_ops,
+	}
+};
+
+MODULE_ALIAS("platform:exynos-ohci");
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4fa5d8c4d239..5f5a63241436 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1005,6 +1005,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
 
+#ifdef CONFIG_USB_OHCI_EXYNOS
+#include "ohci-exynos.c"
+#define PLATFORM_DRIVER		exynos_ohci_driver
+#endif
+
 #ifdef CONFIG_USB_OHCI_HCD_OMAP1
 #include "ohci-omap.c"
 #define OMAP1_PLATFORM_DRIVER	ohci_hcd_omap_driver
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 516ebc4d6cc2..1b8133b6e451 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
 
 #include <linux/platform_device.h>
 #include <plat/usb.h>
+#include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -134,7 +135,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 	int			irq;
 
 	if (usb_disabled())
-		goto err_end;
+		return -ENODEV;
 
 	if (!dev->parent) {
 		dev_err(dev, "Missing parent device\n");
@@ -172,11 +173,8 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs =  regs;
 
-	ret = omap_usbhs_enable(dev);
-	if (ret) {
-		dev_dbg(dev, "failed to start ohci\n");
-		goto err_end;
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
@@ -189,9 +187,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_hcd:
-	omap_usbhs_disable(dev);
-
-err_end:
+	pm_runtime_put_sync(dev);
 	usb_put_hcd(hcd);
 
 err_io:
@@ -220,9 +216,9 @@ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
 
 	iounmap(hcd->regs);
 	usb_remove_hcd(hcd);
-	omap_usbhs_disable(dev);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	usb_put_hcd(hcd);
-
 	return 0;
 }