Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig

6 files changed, 360 insertions, 168 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4ac2750491de..791f11bed606 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -62,7 +62,6 @@ config USB_ARCH_HAS_EHCI
 	boolean
 	default y if FSL_SOC
 	default y if PPC_MPC512x
-	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
 	default y if ARCH_AT91SAM9G45
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ed48a5d79e16..7ca290fcb070 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
new file mode 100644
index 000000000000..b4192c964d0d
--- /dev/null
+++ b/drivers/usb/host/alchemy-common.c
@@ -0,0 +1,337 @@
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ *	    area. Au1550 has OHCI on different base address. No need to handle
+ *	    UDC here.
+ * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
+ *	    as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG	0x7fffc
+#define AU1550_OHCICFG	0x07ffc
+#define AU1200_USBCFG	0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
+#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
+#define USBHEN_E	(1 << 2)		/* OHCI block enable */
+#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
+#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
+#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
+#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
+#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
+#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
+#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
+#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
+#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
+#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
+#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
+#define USBCFG_GME	(1 << 6)		/* OTG mem access */
+#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
+#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
+#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
+#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
+#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
+#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
+#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
+				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
+				 USBCFG_OME)
+
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(2000);
+	} else {
+		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	} else {
+		if (!(r & USBCFG_UCE))		/* UDC also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+	} else {
+		if (!(r & USBCFG_ECE))		/* EHCI also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+		wmb();
+	}
+}
+
+static inline int au1200_coherency_bug(void)
+{
+#if defined(CONFIG_DMA_COHERENT)
+	/* Au1200 AB USB does not support coherent memory */
+	if (!(read_c0_prid() & 0xff)) {
+		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
+		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
+				 " the kernel\n");
+		return -ENODEV;
+	}
+#endif
+	return 0;
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ohci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1200_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		ret = au1200_coherency_bug();
+		if (ret && enable)
+			goto out;
+		__au1200_ehci_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+out:
+	return ret;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+	wmb();
+	udelay(1000);
+}
+
+static inline void au1000_usb_init(unsigned long rb, int reg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+	unsigned long r = __raw_readl(base);
+
+#if defined(__BIG_ENDIAN)
+	r |= USBHEN_BE;
+#endif
+	r |= USBHEN_C;
+
+	__raw_writel(r, base);
+	wmb();
+	udelay(1000);
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+	unsigned long r = __raw_readl(base + creg);
+
+	if (enable) {
+		__raw_writel(r | USBHEN_CE, base + creg);
+		wmb();
+		udelay(1000);
+		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+		wmb();
+		udelay(1000);
+
+		/* wait for reset complete (read reg twice: au1500 erratum) */
+		while (__raw_readl(base + creg),
+			!(__raw_readl(base + creg) & USBHEN_RD))
+			udelay(1000);
+	} else {
+		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+		wmb();
+	}
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+				     int creg)
+{
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1xx0_ohci_control(enable, rb, creg);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block:	USB block to target
+ * @enable:	set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&alchemy_usb_lock, flags);
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_control(block, enable,
+				AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_control(block, enable,
+				AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		ret = au1200_usb_control(block, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+		/* There appears to be some undocumented reset register.... */
+		__raw_writel(0, base + 0x04);
+		wmb();
+		__raw_writel(0, base + creg);
+		wmb();
+	} else {
+		__raw_writel(alchemy_usb_pmdata[0], base + creg);
+		wmb();
+	}
+}
+
+static void au1200_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+	if (susp) {
+		/* save OTG_CAP/MUX registers which indicate port routing */
+		/* FIXME: write an OTG driver to do that */
+		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+	} else {
+		/* restore access to all MMIO areas */
+		au1200_usb_init();
+
+		/* restore OTG_CAP/MUX registers */
+		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+		wmb();
+	}
+}
+
+static void alchemy_usb_pm(int susp)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_pm(susp);
+		break;
+	}
+}
+
+static int alchemy_usb_suspend(void)
+{
+	alchemy_usb_pm(1);
+	return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+	alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+	.suspend	= alchemy_usb_suspend,
+	.resume		= alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_init();
+		break;
+	}
+
+	register_syscore_ops(&alchemy_usb_pm_ops);
+
+	return 0;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 65719e8d24e4..18bafa99fe57 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -14,61 +14,9 @@
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#define USB_HOST_CONFIG   (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_PHYPLLEN (1<<19)
-#define USB_MCFG_UCECLKEN (1<<18)
-#define USB_MCFG_EHCCLKEN (1<<17)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_EBMEN    (1<<3)
-#define USB_MCFG_EMEMEN   (1<<2)
-
-#define USBH_ENABLE_CE	(USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN  | USB_MCFG_RDCOMB |	\
-			  USBH_ENABLE_CE | USB_MCFG_SSDEN  |	\
-			  USB_MCFG_UCAM  | USB_MCFG_EBMEN  |	\
-			  USB_MCFG_EMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ehc(void)
-{
-	/* enable clock to EHCI block and HS PHY PLL*/
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* enable EHCI mmio */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-}
-
-static void au1xxx_stop_ehc(void)
-{
-	unsigned long c;
-
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* Disable EHC clock. If the HS PHY is unused disable it too. */
-	c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
-	if (!(c & USB_MCFG_UCECLKEN))		/* UDC disabled? */
-		c &= ~USB_MCFG_PHYPLLEN;	/* yes: disable HS PHY PLL */
-	au_writel(c, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int au1xxx_ehci_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -136,16 +84,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure"
-				 " the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
@@ -171,7 +109,11 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	au1xxx_start_ehc();
+	if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = hcd->regs;
@@ -187,7 +129,8 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -201,10 +144,10 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	au1xxx_stop_ehc();
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -236,7 +179,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	// could save FLADJ in case of Vaux power loss
 	// ... we'd only use it to handle clock skew
 
-	au1xxx_stop_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 
 	return rc;
 }
@@ -246,7 +189,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-	au1xxx_start_ehc();
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
 
 	// maybe restore FLADJ
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 59e81615e09c..3ff9f82f7263 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1224,7 +1224,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
 #endif
 
-#ifdef CONFIG_SOC_AU1200
+#ifdef CONFIG_MIPS_ALCHEMY
 #include "ehci-au1xxx.c"
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 6b7bc50dfeaa..9b66df8278f3 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -23,92 +23,9 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-#ifndef	CONFIG_SOC_AU1200
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C  (1<<1)
-#define USBH_ENABLE_E  (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif defined(__BIG_ENDIAN)
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
-			  USBH_ENABLE_BE)
-#else
-#error not byte order defined
-#endif
-
-#else   /* Au1200 */
-
-#define USB_HOST_CONFIG    (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN     (1<<31)
-#define USB_MCFG_RDCOMB   (1<<30)
-#define USB_MCFG_SSDEN    (1<<23)
-#define USB_MCFG_OHCCLKEN (1<<16)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM     (1<<7)
-#else
-#define USB_MCFG_UCAM     (0)
-#endif
-#define USB_MCFG_OBMEN    (1<<1)
-#define USB_MCFG_OMEMEN   (1<<0)
-
-#define USBH_ENABLE_CE    USB_MCFG_OHCCLKEN
-
-#define USBH_ENABLE_INIT  (USB_MCFG_PFEN  | USB_MCFG_RDCOMB 	|	\
-			   USBH_ENABLE_CE | USB_MCFG_SSDEN	|	\
-			   USB_MCFG_UCAM  |				\
-			   USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#define USBH_DISABLE      (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#endif  /* Au1200 */
 
 extern int usb_disabled(void);
 
-static void au1xxx_start_ohc(void)
-{
-	/* enable host controller */
-#ifndef CONFIG_SOC_AU1200
-	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	/* wait for reset complete (read register twice; see au1500 errata) */
-	while (au_readl(USB_HOST_CONFIG),
-		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
-		udelay(1000);
-
-#else   /* Au1200 */
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-
-	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	au_sync();
-	udelay(2000);
-#endif  /* Au1200 */
-}
-
-static void au1xxx_stop_ohc(void)
-{
-#ifdef CONFIG_SOC_AU1200
-	/* Disable mem */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
-	au_sync();
-	udelay(1000);
-#endif
-	/* Disable clock */
-	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
-	au_sync();
-}
-
 static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
@@ -178,17 +95,6 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "%s: this is chip revision AB !!\n",
-			pdev->name);
-		printk(KERN_INFO "%s: update your board or re-configure "
-				 "the kernel\n", pdev->name);
-		return -ENODEV;
-	}
-#endif
-
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ\n");
 		return -ENOMEM;
@@ -214,7 +120,12 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	au1xxx_start_ohc();
+	if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+		ret = -ENODEV;
+		goto err3;
+	}
+
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
@@ -224,7 +135,8 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -238,7 +150,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_remove_hcd(hcd);
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
@@ -275,7 +187,7 @@ static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
 
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	au1xxx_stop_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
 bail:
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
@@ -286,7 +198,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
-	au1xxx_start_ohc();
+	alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	ohci_finish_controller_resume(hcd);