diff options
author | Jason Chen <b02280@freescale.com> | 2010-08-11 10:56:13 +0800 |
---|---|---|
committer | Justin Waters <justin.waters@timesys.com> | 2010-12-13 16:09:41 -0500 |
commit | d3f7d85361a3ae7e6a736820965642f8a7ba5051 (patch) | |
tree | f3d58c87322b46c8fa96986377a54780cb6a6250 /drivers/video/mxc | |
parent | d3c7bb03cd1442136d2d57e152d5caa714a13dc1 (diff) |
ENGR00125957-2 hdmi: add Sii9022 hdmi driver support
Add sii9022 driver support.
Signed-off-by: Jason Chen <b02280@freescale.com>
Diffstat (limited to 'drivers/video/mxc')
-rw-r--r-- | drivers/video/mxc/Kconfig | 4 | ||||
-rw-r--r-- | drivers/video/mxc/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/mxc/mxcfb_sii9022.c | 253 |
3 files changed, 258 insertions, 0 deletions
diff --git a/drivers/video/mxc/Kconfig b/drivers/video/mxc/Kconfig index 66a7f84c5656..e00b6a3c0c16 100644 --- a/drivers/video/mxc/Kconfig +++ b/drivers/video/mxc/Kconfig @@ -38,6 +38,10 @@ config FB_MXC_CLAA_WVGA_SYNC_PANEL depends on FB_MXC_SYNC_PANEL tristate "CLAA WVGA Panel" +config FB_MXC_SII9022 + depends on FB_MXC_SYNC_PANEL + tristate "Si Image SII9022 DVI/HDMI Interface Chip" + config FB_MXC_CH7026 depends on FB_MXC_SYNC_PANEL tristate "Chrontel CH7026 VGA Interface Chip" diff --git a/drivers/video/mxc/Makefile b/drivers/video/mxc/Makefile index c428bb95a948..796b0155d9d6 100644 --- a/drivers/video/mxc/Makefile +++ b/drivers/video/mxc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL) += mxcfb_claa_wvga.o obj-$(CONFIG_FB_MXC_TVOUT_CH7024) += ch7024.o obj-$(CONFIG_FB_MXC_TVOUT_TVE) += tve.o obj-$(CONFIG_FB_MXC_LDB) += ldb.o +obj-$(CONFIG_FB_MXC_SII9022) += mxcfb_sii9022.o obj-$(CONFIG_FB_MXC_CH7026) += mxcfb_ch7026.o #obj-$(CONFIG_FB_MODE_HELPERS) += mxc_edid.o obj-$(CONFIG_FB_MXC_EINK_PANEL) += mxc_epdc_fb.o diff --git a/drivers/video/mxc/mxcfb_sii9022.c b/drivers/video/mxc/mxcfb_sii9022.c new file mode 100644 index 000000000000..e37d8d2d2a40 --- /dev/null +++ b/drivers/video/mxc/mxcfb_sii9022.c @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/*! + * @defgroup Framebuffer Framebuffer Driver for SDC and ADC. + */ + +/*! + * @file mxcfb_sii9022.c + * + * @brief MXC Frame buffer driver for SII9022 + * + * @ingroup Framebuffer + */ + +/*! + * Include files + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/mxcfb.h> +#include <linux/fsl_devices.h> +#include <asm/mach-types.h> +#include <mach/hardware.h> + +static struct i2c_client *sii9022_client; +static void sii9022_poweron(void); +static void sii9022_poweroff(void); +static void (*sii9022_reset) (void); + +static __attribute__ ((unused)) void dump_regs(u8 reg, int len) +{ + u8 buf[50]; + int i; + + i2c_smbus_read_i2c_block_data(sii9022_client, reg, len, buf); + for (i = 0; i < len; i++) + dev_dbg(&sii9022_client->dev, "reg[0x%02X]: 0x%02X\n", + i+reg, buf[i]); +} + +static void sii9022_setup(struct fb_info *fbi) +{ + u16 data[4]; + u32 refresh; + u8 *tmp; + int i; + + dev_dbg(&sii9022_client->dev, "SII9022: setup..\n"); + + /* Power up */ + i2c_smbus_write_byte_data(sii9022_client, 0x1E, 0x00); + + /* set TPI video mode */ + data[0] = PICOS2KHZ(fbi->var.pixclock) / 10; + data[2] = fbi->var.hsync_len + fbi->var.left_margin + + fbi->var.xres + fbi->var.right_margin; + data[3] = fbi->var.vsync_len + fbi->var.upper_margin + + fbi->var.yres + fbi->var.lower_margin; + refresh = data[2] * data[3]; + refresh = (PICOS2KHZ(fbi->var.pixclock) * 1000) / refresh; + data[1] = refresh * 100; + tmp = (u8 *)data; + for (i = 0; i < 8; i++) + i2c_smbus_write_byte_data(sii9022_client, i, tmp[i]); + + /* input bus/pixel: full pixel wide (24bit), rising edge */ + i2c_smbus_write_byte_data(sii9022_client, 0x08, 0x70); + /* Set input format to RGB */ + i2c_smbus_write_byte_data(sii9022_client, 0x09, 0x00); + /* set output format to RGB */ + i2c_smbus_write_byte_data(sii9022_client, 0x0A, 0x00); +} + +static int lcd_fb_event(struct notifier_block *nb, unsigned long val, void *v) +{ + struct fb_event *event = v; + struct fb_info *fbi = event->info; + + /* assume sii9022 on DI0 only */ + if (strcmp(event->info->fix.id, "DISP3 BG")) + return 0; + + switch (val) { + case FB_EVENT_MODE_CHANGE: + sii9022_setup(fbi); + break; + case FB_EVENT_BLANK: + if (*((int *)event->data) == FB_BLANK_UNBLANK) + sii9022_poweron(); + else + sii9022_poweroff(); + break; + } + return 0; +} + +static struct notifier_block nb = { + .notifier_call = lcd_fb_event, +}; + +static int __devinit sii9022_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i, dat; + struct mxc_lcd_platform_data *plat = client->dev.platform_data; + + sii9022_client = client; + + if (plat->reset) { + sii9022_reset = plat->reset; + sii9022_reset(); + } + + /* Set 9022 in hardware TPI mode on and jump out of D3 state */ + i2c_smbus_write_byte_data(sii9022_client, 0xc7, 0x00); + msleep(10); + + /* read device ID */ + for (i = 10; i > 0; i--) { + dat = i2c_smbus_read_byte_data(sii9022_client, 0x1B); + printk(KERN_DEBUG "Sii9022: read id = 0x%02X", dat); + if (dat == 0xb0) { + dat = i2c_smbus_read_byte_data(sii9022_client, 0x1C); + printk(KERN_DEBUG "-0x%02X", dat); + dat = i2c_smbus_read_byte_data(sii9022_client, 0x1D); + printk(KERN_DEBUG "-0x%02X", dat); + dat = i2c_smbus_read_byte_data(sii9022_client, 0x30); + printk(KERN_DEBUG "-0x%02X\n", dat); + break; + } + } + if (i == 0) { + dev_err(&sii9022_client->dev, + "SII9022: cound not find device\n"); + return -ENODEV; + } + + fb_register_client(&nb); + + for (i = 0; i < num_registered_fb; i++) { + /* assume sii9022 on DI0 only */ + if ((strcmp(registered_fb[i]->fix.id, "DISP3 BG") == 0) + && (i == 0)) { + struct fb_info *fbi = registered_fb[i]; + acquire_console_sem(); + fb_blank(fbi, FB_BLANK_POWERDOWN); + release_console_sem(); + + sii9022_setup(fbi); + + acquire_console_sem(); + fb_blank(fbi, FB_BLANK_UNBLANK); + release_console_sem(); + + fb_show_logo(fbi, 0); + } + } + + return 0; +} + +static int __devexit sii9022_remove(struct i2c_client *client) +{ + fb_unregister_client(&nb); + sii9022_poweroff(); + return 0; +} + +static int sii9022_suspend(struct i2c_client *client, pm_message_t message) +{ + /*TODO*/ + return 0; +} + +static int sii9022_resume(struct i2c_client *client) +{ + /*TODO*/ + return 0; +} + +static void sii9022_poweron(void) +{ + /* Turn on DVI or HDMI */ + i2c_smbus_write_byte_data(sii9022_client, 0x1A, 0x01); + return; +} + +static void sii9022_poweroff(void) +{ + /* disable tmds before changing resolution */ + i2c_smbus_write_byte_data(sii9022_client, 0x1A, 0x11); + + return; +} + +static const struct i2c_device_id sii9022_id[] = { + { "sii9022", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, sii9022_id); + +static struct i2c_driver sii9022_i2c_driver = { + .driver = { + .name = "sii9022", + }, + .probe = sii9022_probe, + .remove = sii9022_remove, + .suspend = sii9022_suspend, + .resume = sii9022_resume, + .id_table = sii9022_id, +}; + +static int __init sii9022_init(void) +{ + return i2c_add_driver(&sii9022_i2c_driver); +} + +static void __exit sii9022_exit(void) +{ + i2c_del_driver(&sii9022_i2c_driver); +} + +module_init(sii9022_init); +module_exit(sii9022_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("SI9022 DVI/HDMI driver"); +MODULE_LICENSE("GPL"); |