summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAndrew Victor <andrew@sanpeople.com>2006-09-27 09:44:11 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2006-09-28 11:52:05 +0100
commit72729910c38ca5b4736032c15dc3f9d48fe4f68a (patch)
treee7461ec8e0ff07d1634d7d7a467cb8454135a5c8 /drivers
parent26f908186f923291999833e9d563259834bdca06 (diff)
[ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/at91_mci.c4
-rw-r--r--drivers/net/arm/at91_ether.c2
-rw-r--r--drivers/serial/at91_serial.c2
-rw-r--r--drivers/usb/gadget/at91_udc.c6
4 files changed, 7 insertions, 7 deletions
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6b7638b84290..4b3d4d637030 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -850,7 +850,7 @@ static int at91_mci_probe(struct platform_device *pdev)
/*
* Allocate the MCI interrupt
*/
- ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+ ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
if (ret) {
printk(KERN_ERR "Failed to request MCI interrupt\n");
clk_disable(mci_clk);
@@ -906,7 +906,7 @@ static int at91_mci_remove(struct platform_device *pdev)
mmc_remove_host(mmc);
at91_mci_disable();
- free_irq(AT91_ID_MCI, host);
+ free_irq(AT91RM9200_ID_MCI, host);
mmc_free_host(mmc);
clk_disable(mci_clk); /* Disable the peripheral clock */
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 95b28aa01f4f..3ecf2cc53a7c 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
return -ENOMEM;
dev->base_addr = AT91_VA_BASE_EMAC;
- dev->irq = AT91_ID_EMAC;
+ dev->irq = AT91RM9200_ID_EMAC;
SET_MODULE_OWNER(dev);
/* Install the interrupt handler */
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 54c6b2adf7b7..bf4bf103e5a0 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -139,7 +139,7 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
* AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
* We need to drive the pin manually.
*/
- if (port->mapbase == AT91_BASE_US0) {
+ if (port->mapbase == AT91RM9200_BASE_US0) {
if (mctrl & TIOCM_RTS)
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfebca05ead5..043744f1ab72 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1658,7 +1658,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
return -ENODEV;
}
- if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
+ if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
DBG("someone's using UDC memory\n");
return -EBUSY;
}
@@ -1720,7 +1720,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
fail1:
device_unregister(&udc->gadget.dev);
fail0:
- release_mem_region(AT91_BASE_UDP, SZ_16K);
+ release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
DBG("%s probe failed, %d\n", driver_name, retval);
return retval;
}
@@ -1742,7 +1742,7 @@ static int __devexit at91udc_remove(struct platform_device *pdev)
free_irq(udc->board.vbus_pin, udc);
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
- release_mem_region(AT91_BASE_UDP, SZ_16K);
+ release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
clk_put(udc->iclk);
clk_put(udc->fclk);